Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 648

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2014_068
id	sigradi2014_068
authors	Almeida da Silva, Adriane Borda; Nirce Saffer Medevedosky, Sirlene de Mello Sopeña, Gustavo Alcantara Brod, Thales Teodoro
year	2014
title	Contrução de cenários motivacionais sob a perspectiva de tecnologias sociais [Construction of motivational scenarios in the perspective of social technologies]
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 493-496
summary	This paper describes the development of actions, denominated motivational scenarios, which sought to motivate behavior change in favor of the requalification of the urban space in a playful manner; the actions were directed to areas of social housing and the appreciation of architectural heritage. The concept of Social Technology and the recognition of advanced technologies of representation and visualization were characterized in this study as theoretical and technological framework respectively. The actions were structured from anamorphosis techniques, augmented reality and natural, tactile and motion-capture interfaces, building interactive virtual scenarios that are provocative in facing the architectural issues outlined
keywords	Motivational scenarios; urban requalification; architectural heritage; natural interfaces and augmented realitys
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2014_140
id	sigradi2014_140
authors	Colombo, Monica Ines Fernandez; Liliana Telma Bonvecchi, Adriana Granero, Mabel Brignone
year	2014
title	Las tecnologías de información y comunicación como respuesta a la libertad del diseño [Information technology and communication as response to design in freedom]
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 316-319
summary	As educators, we have been witness and party of ICT’s application in teaching architecture. From computer assisted design, representation models, dynamic and interactive visualization, until the arrival of digital fabrication, the incorporation of augmented reality and the interaction on mobile devices. Reflections on digital technology have generated discussions on architectural theory in order to find the source of architectural language inspirations. We find ourselves today in a context of important intellectual renewal aimed at the design in freedom.
keywords	Education – Architectural Lenguage – Digital Fabrication
series	SIGRADI
email
last changed	2016/03/10 09:49

_id	sigradi2014_301
id	sigradi2014_301
authors	Dametto, Ana Paula de Andrea; Janice de Freitas Pires, Monica Veiga, Adriane Borda Almeida da Silva
year	2014
title	Representações de Patrimônio Arquitetônico: para documentar, difundir e tocar [Representations of Architectural Heritage: for documenting, disseminating and touching]
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 487-490
summary	In this paper experiences of documenting an artifact of cultural interest are reported, these experiences were made possible by the interaction between researchers of two areas of study: Memory and Heritage and Digital Graphic Representation. These experiences include building a registration form, obtaining models in virtual reality, augmented reality and 3D printing. The different perceptual dimensions that each type of description can add to an inventorial system were observed as well as which organizational and access to information implications each of these types requires from such a system.
keywords	Architectural heritage; architectural documentation; advanced technologies of representation and visualization; metallic artifacts
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ecaade2014_153
id	ecaade2014_153
authors	David Morton
year	2014
title	Augmented Reality in architectural studio learning:How Augmented Reality can be used as an exploratory tool in the design learning journey
doi	https://doi.org/10.52842/conf.ecaade.2014.1.343
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 343-356
summary	The boundaries of augmented reality in the academic field are now being explored at an ever increasing level. In this paper we present the initial findings of an educational project focusing on the use of augmented reality in the design process of an architectural student. The study seeks to evaluate the use of AR as a tool in the design stages, allowing effective exploration of spatial qualities of design projects undertaken in the studio. The learning process is guided by the exploration and detection of a design idea in both form and function, with the virtual environment providing a dynamic environment (Mantovani, 2001). This is further reflected in the constructivist theory where the learning processes use conceptual models, which are used to create incremental stages that become the platform to attain the next [Winn, 1993]. The additional benefit of augmented reality within the learning journey is the ability of the students to visually explore the architectural forms they are creating in greater depth.
wos	WOS:000361384700034
keywords	Augmented reality; pedagogy; learning journey; exploration
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2023_000
id	ecaade2023_000
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 1
doi	https://doi.org/10.52842/conf.ecaade.2023.1.001
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, 905 p.
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2023_001
id	ecaade2023_001
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 2
doi	https://doi.org/10.52842/conf.ecaade.2023.2.001
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, 899 p.
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
type	normal paper
email
last changed	2024/08/29 08:36

_id	caadria2014_000
id	caadria2014_000
authors	Gu, Ning; Shun Watanabe, Halil Erhan, Matthias Hank Haeusler, Weixin Huang and Ricardo Sosa (eds.)
year	2014
title	Rethinking Comprehensive Design: Speculative Counterculture
doi	https://doi.org/10.52842/conf.caadria.2014
source	Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, 994 p.
summary	Rethinking Comprehensive Design—the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014)—emphasises a cross-disciplinary context to challenge the mainstream culture of computational design in architecture. It aims to (re)explore the potential of computational design methods and technologies in architecture from a holistic perspective. The conference provides an international forum where academics and practitioners share their novel research development and reflection for defining the future of computation in architectural design. Hosted by the Department of Design, Engineering and Management at the Kyoto Institute of Technology, CAADRIA 2014 presents 88 peer-reviewed full papers from all over the world. These high-quality research papers are complimented by 34 short work-in-progress papers submitted for the poster session of the conference. The conference proceedings were produced by a motivated team of volunteers from the CAADRIA community through an extensive collaboration. The 88 full papers rigorously double-blind reviewed by the dedicated International Review Committee (consisting of 74 experts), testify to CAADRIA’s highly respectable international standing. Call for abstracts sent out in July 2013 attracted 298 submissions. They were initially reviewed by the Paper Selection Committee who accepted 198 abstracts for further development. Of these, 118 full papers were eventually submitted in the final stage. Each submitted paper was then assessed by at least two members of the International Review Committee. Following the reviewers’ recommendations, 91 papers were accepted by the conference, of which 88 are included in this volume and for presentation in CAADRIA 2014. Collectively, these 88 papers define Rethinking Comprehensive Design in terms of the following research streams: Shape Studies; User Participation in Design; Human-Computer Interaction; Digital Fabrication and Construction; Computational Design Analysis; New Digital Design Concepts and Strategies; Practice-Based and Interdisciplinary Computational Design Research; Collaborative and Collective Design; Generative, Parametric and Evolutionary Design; Design Cognition and Creativity; Virtual / Augmented Reality and Interactive Environments; Computational Design Research and Education; and Theory, Philosophy and Methodology of Computational Design Research. In the following pages, you will find a wide range of scholarly papers organised under these streams that truly capture the quintessence of the research concepts. This volume will certainly inspire you and facilitate your journey in Rethinking Comprehensive Design.
series	CAADRIA
last changed	2022/06/07 07:49

_id	caadria2023_187
id	caadria2023_187
authors	Lopez Rodriguez, Alvaro and Pantic, Igor
year	2023
title	Augmented Environments: The Architecture for the Augmented Era
doi	https://doi.org/10.52842/conf.caadria.2023.1.403
source	Immanuel Koh, Dagmar Reinhardt, Mohammed Makki, Mona Khakhar, Nic Bao (eds.), HUMAN-CENTRIC - Proceedings of the 28th CAADRIA Conference, Ahmedabad, 18-24 March 2023, pp. 403–412
summary	Human imagination has played with the idea of an alternative technological world for years. From dystopian proposals like Neuromancer or The Matrix to more positive views like the recent Upload series, the exploration of the friction between the digital world and the physical world has entertained the imagination of our society for decades. Outside the fictional environments, the omnipresence of the internet and the development of “the cloud” are showing that the virtual world is possible and that the idea of a Metaverse is no longer part of science fiction but a very real future for human relations (Winters 2021). In line with the idea of the Metaverse, the intersection of the virtual and the physical world is being explored through the idea of Extended Realities. Technology is allowing humans to enhance their capabilities more than ever, and in fact, it has been proposed that we are entering the Augmented era (King 2014). This paper explores the opportunities and possible challenges that “Extended Architecture” has by analyzing a research project based on augmented reality as the media to explore these ideas. This project will propose a speculative approach to how the fact that in the recent future, everyone will have access to an AR device will change the way we perceive and understand our architectural environment.
keywords	Work in progress, Virtual and Augmented Environments, Disruptive Modes of Practice and Pedagogy, Extended Realities, Machine Learning
series	CAADRIA
email
last changed	2023/06/15 23:14

_id	caadria2014_501
id	caadria2014_501
authors	Unal, Faruk Can
year	2014
title	Use of Augmented Reality Technologies in Architectural Guide; The Evaluation on Eindhoven City
doi	https://doi.org/10.52842/conf.caadria.2014.915
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 915–916
series	CAADRIA
type	poster
email
last changed	2022/06/07 07:57

_id	caadria2014_519
id	caadria2014_519
authors	Vaai, Jay; Jules Moloney and Tane Moleta
year	2014
title	Integrating Project Management and Mobile Augmented Reality
doi	https://doi.org/10.52842/conf.caadria.2014.951
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 951–952
series	CAADRIA
type	poster
email
last changed	2022/06/07 07:57

_id	ecaade2014_162
id	ecaade2014_162
authors	Andrzej Zarzycki
year	2014
title	Teaching and Designing for Augmented Reality
doi	https://doi.org/10.52842/conf.ecaade.2014.1.357
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 357-364
summary	This paper discusses ways emerging interactive technologies are adopted by designers and extended into areas of design, education, entertainment, and commerce. It looks, in detail, at various project development stages and methodologies used to engage design focused students into, often complex, technological issues. The discussion is contextualized through a number of case studies of mobile and marker-based augmented reality (AR) applications developed by students. These applications include an app for a fashion based social event that allows participants to preview recent collection additions, an info-navigational app for the High Line elevated urban park in New York City, a marker-based maze game, and an interior decorating interface to visualize various furnishing scenarios. While a number of case studies will be discussed from a developer perspective, the primary focus is on the concept and content development, interface design, and user participation.
wos	WOS:000361384700035
keywords	Augmented reality; ar; gamification; mobile culture
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia14_409
id	acadia14_409
authors	Bard, Joshua; Gannon, Madeline; Jacobson-Weaver, Zachary; Jeffers, Michael; Smith, Brian; Contreras, Mauricio
year	2014
title	Seeing is Doing: Synthetic Tools for Robotically Augmented Fabrication in High-Skill Domains
doi	https://doi.org/10.52842/conf.acadia.2014.409
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 409-416
summary	The historical split between visualization and actualization in architectural design has encouraged a disciplinary split between representation (the domain of the designer) and construction (a domain entirely removed from the Architect’s purview). This split between seeing and doing in architectural design can be questioned in the context of contemporary robotic technologies where physical and digital workflows comingle in high-skill, collaborative domains.
keywords	Architectural Robotics, Human-Robot Collaboration, MOCAP, Adaptive Fabrication, High-Skill Domain, Robotics and Autonomous Design Systems
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	ecaade2014_111
id	ecaade2014_111
authors	Fabian Danker and Oliver Jones
year	2014
title	Combining Augmented Reality and Building Information Modelling - An industry perspective on applications and future directions.
doi	https://doi.org/10.52842/conf.ecaade.2014.2.525
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 525-536
summary	The aim of this paper is to investigate the applications both current and potential, of combining Augmented Reality (AR) and Building Information Modelling (BIM), providing an insight into attitudes towards utilising these technologies within the construction industry. This paper presents a study which has evaluated current research on the topic of AR and BIM, conducted semi structured interviews with a panel of industry experts and surveyed a sample group of 43 within the wider UK construction industry . Industry experts were interviewed using semi-structured interviews and results were thematically analysed with the data gathered from the literature review. 5 core themes used to structure a nine item industry and practitioner questionnaire. Results suggest that use of AR and BIM within the construction industry will continue to grow with the advent of emerging technologies. Use of AR and BIM combined with 3D Scanning, Wireless Sensory Network will also increase and the synergies between BIM and these emerging technologies will improve overall efficiencies in design, delivery, maintenance and demolition of projects. The findings of this study contribute further knowledge to understanding the implications and possibilities that utilising AR and BIM will have in the construction industry.
wos	WOS:000361385100055
keywords	Augmented reality; emerging technologies; building information modelling; aec industry
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia14projects_173
id	acadia14projects_173
authors	Huang, Alvin
year	2014
title	Daegu Gosan Public Library
doi	https://doi.org/10.52842/conf.acadia.2014.173
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 173-176
summary	A proposal for a public library with intelligent, open and integrated systems which supersedes the media storage methods of the past and changes the library space into a hybrid environment through ubiquitous information resources, integrated furnishings and active communal social spaces
keywords	Intelligent Environments, Computational design analysis, New digital design concepts and strategies, Computational design research and education, Virtual/augmented reality and interactive environments, Practice-based and interdisciplinary computational design research
series	ACADIA
type	Practice Projects
email
last changed	2022/06/07 07:49

_id	caadria2014_274
id	caadria2014_274
authors	Kaftan, Martin; Markus Manahl, Jiri Pavlicek, Elmar Hess and Urs Hirschberg
year	2014
title	Augmented Parametrics
doi	https://doi.org/10.52842/conf.caadria.2014.615
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 615–624
summary	Current parametric design software lacks the capacity to integrate simulation and optimisation when they would be most relevant: at the early stages of the design process. This paper presents a novel framework to address this issue: A parametric program that supports performance-based modelling by integrating detailed physical simulation modules that also take construction issues into account, while at the same time providing easy access to high-level optimisation approaches. Providing bidirectional parametric modelling capabilities, we refer to the system under development as augmented parametrics. It is being developed as part of a research project sponsored by the Austrian Science Foundation.
keywords	Parametric design; generative design; optimization; building performance simulation
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	sigradi2014_266
id	sigradi2014_266
authors	Lonsing, Werner; Peter Anders Ph.D.
year	2014
title	Portable Architectural Design - Developing a Immersive Augmented Reality System for Architects
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay- Montevideo 12,13,14 November 2014, pp. 166-169
summary	The architectural design process is, besides sketching, bound to the office. The introduction of computational design did not really change it. This paper will introduce and discuss the development of an affordable solution for a wearable and immersive augmented-reality-system (AR) for architects based on simple hardware components with some essential options to create and edit three-dimensional virtual shapes while being on-site.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	caadria2014_114
id	caadria2014_114
authors	Nakano, Akito and Akira Wakita
year	2014
title	ASOM
doi	https://doi.org/10.52842/conf.caadria.2014.117
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 117–126
summary	Recently more researches on tangible objects have been conducted that enhance the intuitive polygonal or surface modelling of designers in digital and physical worlds. However, a few researches have been done that augment the digital solid modelling with tangible objects. In this paper, we present the Augmented Solid Modeller (ASoM) which helps designers create more complex shapes by a combination of Boolean operations between a different type of 3D-printed tangible objects, which is different from the conventional single shape type bottom-up modelling approaches. When multiple objects intersect each other at a given position and angle, the interference or removed shape is often unexpected for designers. Also, as 3D-printed objects are used for designers only to configure and discuss the shape of final digital 3D model in existing CAAD, ASoM changes the role of 3D-printed objects from the replicas to reusable tools for other modelling opportunities. We offered ASoM to students majoring or interested in CAAD and interviewed them to get comments. Since the speed and precision of 3D-printing will achieve immediate improvement, ASoM is a pioneer in developing cutting-edge approach for designers to model both in digital and physical worlds.
keywords	Solid Modeller; Boolean operations; 3D-printing; CAD
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	acadia14_81
id	acadia14_81
authors	Otten, Claudia
year	2014
title	Everyone is an Architect
doi	https://doi.org/10.52842/conf.acadia.2014.081
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 81-90
summary	The power of computing combined with the user-friendly platform of gaming technology allows design to be infinite yet bespoke and accessible. Everyone can be an architect.
keywords	Gaming and Social Design, User Participation in Design, Human-Computer Interaction, Ubiquitous and Mobile Computing, Virtual/Augmented Reality and Interactive Environments, Virtual Architecture and City Modeling
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 08:00

_id	acadia14projects_143
id	acadia14projects_143
authors	Robinson, Alexander
year	2014
title	Calibrating Agencies in a Territoy of Instrumentality
doi	https://doi.org/10.52842/conf.acadia.2014.143
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 143-146
summary	Exhibited is an interactive landscape player and public outreach tool for robotically sand modeled and vacuum formed designs for dust control mitigation landscapes for the Owens Lake in Lone Pine, California. This system engages users and stakeholders with the tools and products of a digitally augmented rapid landscape prototyping machine built to create agency for multiple values in the design of dust control infrastructure for the dry lake.
keywords	Robotics and Autonomous Design Systems, Simulation + Intuition, Material Logics and Tectonics, Multidisciplinary Design Optimization, User participation in design, Virtual/augmented reality and interactive environments
series	ACADIA
type	Research Projects
email
last changed	2022/06/07 07:56

_id	acadia14_487
id	acadia14_487
authors	Taron, Joshua; Parker, Matthew
year	2014
title	Augmented Agency: Reorienting trompe l’oeil in the age of Google Earth
doi	https://doi.org/10.52842/conf.acadia.2014.487
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 487-491
summary	This paper defines the contours of a new research trajectory that explores architecture as part of a larger encodable surface oriented toward the technologies that image it. This is situated within a conceptual framework that identifies terraforming, geoaesthetics and the composition/recomposition of the Earth itself as foundational architectural problems manifesting at all terrestrial scales from the microscopic to the geopolitical.
keywords	The Stack, Google Earth, Interface, Building Facades, Google Street View, Urban Planning, Intelligent Environments
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

For more results click below: