Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 632

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2014_233
id	ecaade2014_233
authors	Evangelos Pantazis and David Gerber
year	2014
title	Material Swarm Articulations - New View Reciprocal Frame Canopy
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 463-473
doi	https://doi.org/10.52842/conf.ecaade.2014.1.463
wos	WOS:000361384700046
summary	Material Swarm Articulations, is an experiment in developing a multi-objective optimization system that incorporates bottom up approaches for informing architectural design. The paper presents an initial built project that demonstrates the combination of a structural form finding method, with an agent based design system through the digital fabrication processes. The objective of this research is to develop a workflow combined with material and construction constraints that has the potential to increase performance objectives while enabling geometric complexity and design driven articulation of a traditional tectonic system. The emphasis of the research at this stage is to take advantage of material properties and assembly methods applied to a digital design and simulation workflow that enables emergent patterns to influence the performance of the space.The paper illustrates the research through a prototype of a self standing canopy structure in 1:1 scale. It presents results of the form finding, generative patterning, digital fabrication affordances and sets and agenda for next steps in the use of multi-agent systems for design purposes.
keywords	Computational design; agent-based system; digital fabrication; parametric design; reciprocal frames; form finding; multi-objective optimization, multi-agent systems for design
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia14_375
id	acadia14_375
authors	Maxwell, Iain; Pigram, David; Egholm-Pedersen, Ole
year	2014
title	Fabrication Aware Form-Finding: A Combined Quasi-Reciprocal Timber and Discontinious Post-tensioned Concrete Structure
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 375-383
doi	https://doi.org/10.52842/conf.acadia.2014.375
summary	This paper describes innovations in fabrication-aware form-finding applied to two novel construction methods: one for quasi-reciprocal timber frames, the other for post-tensioned precast concrete structures. A pavilion which applies all innovations serves as a case study.
keywords	Fabrication-aware form-finding, precast concrete, reciprocal frame, multi-axis timber construction, material logics and tectonics, digital fabrication
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:58

_id	ecaade2014_010
id	ecaade2014_010
authors	Anna Laskari
year	2014
title	Multidimensional Comparative Analysis for the Classification of Residual Urban Voids
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 283-292
doi	https://doi.org/10.52842/conf.ecaade.2014.2.283
wos	WOS:000361385100030
summary	Spatial configurations can be perceived through a variety of descriptions of their physical form and structure. Each description can offer an autonomous interpretation or be combined with others parathetically, in a logic of multiple distinct layers. However it is asserted that meaningful information can be extracted from a simultaneous view of sets of descriptions within a high-dimensional structure. This paper investigates the possibility of conducting a comparative analysis and classification of non-typical spatial formations based on the synchronous view of multiple quantifiable spatial attributes. Under the hypothesis of a reciprocal definition of spatial structure and occupation practices, it is intended to identify distinct generic spatial types in order to subsequently determine a range of suitable respective generic use types. This investigation supports the formulation of strategies for the reactivation of unused, residual urban voids, currently being addressed by the research programme titled "Strategies to network urban interventions in the Metropolitan Centre of Athens". The programme is carried out by the School of Architecture of the National Technical University of Athens in collaboration with the Region of Attica, under the scientific coordination of Professor Dr. Parmenidis (2013).
keywords	Multidimensional descriptions; generic spatial types; quantifiable attributes; dimensionality reduction; classification
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2014_037
id	caadria2014_037
authors	Khoo, Chin Koi
year	2014
title	Designing a Responsive Material System with Physical Computing
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 97–106
doi	https://doi.org/10.52842/conf.caadria.2014.097
summary	This paper focuses on an investigation to explore architectural design potentials with a responsive material system and physical computing. Contemporary architects and designers are seeking to integrate physical computing in responsive architectural designs; however, they have largely borrowed from engineering technology’s mechanical devices and components. There is the opportunity to investigate an unexplored design approach to exploit the responsive capacity of material properties as alternatives to the current focus on mechanical components and discrete sensing devices. This opportunity creates a different design paradigm for responsive architecture that investigates the potential to integrate physical computing with responsive materials as one integrated material system. Instead of adopting highly intricate and expensive materials, this approach is explored through accessible and off-the-shelf materials to form a responsive material system, called Lumina. Lumina is implemented as an architectural installation called Cloud that serves as a morphing architectural skin. Cloud is a proof of concept to embody a responsive material system with physical computing to create a reciprocal and luminous architectural intervention for a selected dark corridor. It represents a different design paradigm for responsive architecture through alternative exploitation of contemporary materials and parametric design tools.
keywords	Physical computing; responsive material systems; adaptive architecture
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	acadia14projects_127
id	acadia14projects_127
authors	Pantazis, Evangelos; Gerber, David Jason; Pantazis, Jason
year	2014
title	Material Swarm Articulations: The New View Reciprocal Frame Canopy
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 127-130
doi	https://doi.org/10.52842/conf.acadia.2014.127
summary	NEW VIEW is a pavilion structure that explores how a swarm driven and form found tectonic system is applied to a non-uniform parametric reciprocal frame structure can be combined with material properties, the vernacular and fabrication techniques in order to design and construct novel spatial structures through a material swarm articulation.
keywords	Form Finding, Generative Design, Parametric design, Digital Fabrication, Agent Based Systems, Craft in a Digital Age, Material Tectonics
series	ACADIA
type	Research Projects
email
last changed	2022/06/07 08:00

_id	acadia14_311
id	acadia14_311
authors	Crolla, Kristof; Williams, Nicholas
year	2014
title	Smart Nodes: A System for Variable Structural Frames with 3D Metal-Printed Nodes
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 311-316
doi	https://doi.org/10.52842/conf.acadia.2014.311
summary	The SmartNodes research explores the potentials for highly-designed, customized connection nodes to be used in combination with standardized components in enabling a system of highly differentiated structures. This paper reports on the design workflow and research in progress towards the development of a prototype structure.
keywords	3D Metal Printing, Frame Structures, Embedded Intelligence, Digital Manufacturing, Mass-Customization, Digital Design Workflow, Works in Progress.
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:56

_id	caadria2014_147
id	caadria2014_147
authors	Dounas, Theodoros and A. Benjamin Spaeth
year	2014
title	Universal Dovetail Joint
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 409–418
doi	https://doi.org/10.52842/conf.caadria.2014.409
summary	The paper presents the geometrical investigation of a three-dimensional dovetail joint that can lead (timber) frame construction to more than two-dimensional frames; the creation of timber construction with timber members meeting at irregular angles can be shown to be feasible, simplifying overall construction. Traditional joints in timber construction usually work only in two dimensions, in other words in planar surfaces, resulting thus in complicated assemblies in three-dimensions. Stemming from traditional timber dovetail joints, the universal joint under investigation is produced under revolution of the geometry of a dovetail fastener through its middle axis. The resulting concave disk can connect timber elements under irregular angles, without the need for the structural members to lie in the same plane. The joint works due to friction between members rather than using any other element of bonding, allowing for the assembly of joints and structural members with no specialized tools. The paper explores the geometric constraints and degrees of freedom that such a disk creates in timber construction, and consequently in similar linear construction systems.
keywords	Universal Joint; timber construction; geometric investigation
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ascaad2014_034
id	ascaad2014_034
authors	Shateh, Hadi and Mahbub Rashid
year	2014
title	The Relationship between the Governmental and Syntactic Cores: The case of Tripoli, Libya
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 415-427
summary	This study examines the relationships between the governmental cores composed of the governor's palace and the buildings of ministries, and the syntactic cores composed of the most integrated spaces defined using the ‘Space Syntax’ techniques, over three historical phases of Tripoli, Libya: the early, colonial, and postcolonial phases. Tripoli was chosen for the study because each of its historical phases was distinguished by different political, social, and/or cultural systems. The early phase represented the Islamic systems; the colonial phase represented the Italian and British systems; and the post-colonial phase represented the regional-modern systems. The study looked at the relationships between the governmental cores and the syntactic cores of the city by overlapping the public/governmental buildings with the syntactic structures of the axial maps of six morphological frames (or maps) representing six morphological periods – two frames for each historical phase of the city. In the study, a close relationship between the governmental and syntactic cores was observed. During the early and colonial phases, the city had same governmental core but different syntactic cores. In contrast, during the post-colonial phase the city had different but overlapping governmental and syntactic cores. The study is important for it helps explain the role of the governmental and syntactic cores in the formation and transformation of the city over time. As a result, the study also helps explain the relationship between functional morphology, which examines the relationship between function and structure, and the spatial morphology, which examines the relationship among the spaces of a structure.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ijac201412403
id	ijac201412403
authors	Smithwick, Daniel and Larry Sass
year	2014
title	Embodied Design Cognition: Action-Based Formalizations in Architectural Design
source	International Journal of Architectural Computing vol. 12 - no. 4, 399-418
summary	This paper frames design knowledge as formalizable physical actions that can more fully exploit future design tools and production methods.As computational design tools become more physically interactive and integrated into our environment we need new research frameworks to develop theories of physical design action as a form of knowledge. Symbolic theories of design knowledge traditionally frame design activity as a mental process and as a result researchers have not fully explored the potential for bodily-based computational design knowledge.We present an action- based design notation drawing inspiration from music performance theory to illustrate how this may impact design research.We discuss findings from situated cognition in cognitive science as an alternative framework for exploring and expanding design knowledge.We conclude with suggestions for future work in robotic-aided design cognition.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2014_021
id	ecaade2014_021
authors	Aant van der Zee, Bauke de Vries and Theo Salet
year	2014
title	From rapid prototyping to automated manufacturing
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 455-461
doi	https://doi.org/10.52842/conf.ecaade.2014.1.455
wos	WOS:000361384700045
summary	In this paper we present an outline of a newly started project to develop a tool which connects BIM to a manufacturing technique like 3D printing. First we will look some promising manufacturing techniques. We will design a small dwelling and export it into a BIM, from which we will extract our data to generate the path the nozzle has to follow. The chosen path is constrained by the material properties, the design and speed of the nozzle. To validate the system we develop a small VR tool in which we mimic a manufacturing tool.
keywords	Rapid prototyping; rapid manufacturing; robotics; automation; building information model (bim)
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2014_056
id	caadria2014_056
authors	Abdelhameed, Wael A.
year	2014
title	Creativity and VR Use
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 719–728
doi	https://doi.org/10.52842/conf.caadria.2014.719
summary	Creativity with its various processes is involved in all design actions. Creativity used in architectural design is different than creativity in other domains. However, creativity in general with its related cognition processes has no general theory. This research proposes certain activities of initial architectural design phases in which the role of activity is important. The research proceeds to present a case study of two architectural design studios in which a VR environment is employed in order to investigate the effect of VR use on the creativity in those initial design phases. The research applies a methodology of qualitative and quantitative analysis. Various architectural design factors are neutralized to overcome the influence generated from human factors variation and design thinking prejudice on architectural designing and the associated creativities.
keywords	Virtual Reality; Creativity; Architectural Design; Design Studio
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ijac201412407
id	ijac201412407
authors	Abdelmohsen, Sherif M.
year	2014
title	An Inquiry into Designing in Context using Generative Systems
source	International Journal of Architectural Computing vol. 12 - no. 4, 477-494
summary	The use of generative systems has been widely investigated in the architectural design process through different procedures and levels of autonomy to generate form.The digression from abstract pre- existing notions of vocabulary and rules – even when resulting in emergent forms – to address complex real- world contexts is yet a challenging undertaking.This paper explores incorporating context in the process of designing using generative systems from ideation to fabrication, and explores the relationship between the emergent nature of generative design and the situated act of designing while using generative design tools.A course offered for 3rd year architecture students at the Department of Architecture, Ain Shams University, Egypt, was designed for this purpose. 110 students employed systems including shape grammars, L- systems, fractals and cellular automata, to design and fabricate 8 group projects.A discussion around emergence and situatedness is presented, with special attention to the designing process from ideation to fabrication.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2016_048
id	ecaade2016_048
authors	Abramovic, Vasilija and Achten, Henri
year	2016
title	From Moving Cube to Urban Interactive Structures - A case study
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 661-668
doi	https://doi.org/10.52842/conf.ecaade.2016.1.661
wos	WOS:000402063700071
summary	When thinking about the future vision of a city, having in mind recent development in digital technologies and digital design tools we are inclined to expect new building structures which incorporate this technology to better help us manage the complexity of life, and to simplify our daily lives and tasks. The idea behind this research paper lies in design of such structures, which could be put inside an urban context and engage in creating a built environment that can add more to the quality of life. For us Interactive architecture is architecture that is responsive, flexible, changing, always moving and adapting to the needs of today. The world is becoming more dynamic, society is constantly changing and the new needs it develops need to be accommodated. As a result architecture has to follow. Spaces have to become more adaptive, responsive and nature concerned, while having the ability for metamorphosis, flexibility and interactivity. Taken as a starting point of this idea is a specific module from graduation project in 2014 "The Unexpected city", where it was possible to test out first ideas about interactive and flexible objects in an urban environment.
keywords	Flexible architecture; Interactive architecture; Responsive systems
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2014_014
id	ascaad2014_014
authors	Abuelmaatti, Aisha A.; Vian S. Ahmed and Heveine S. Baban
year	2014
title	Collaborative Environments in Small and Medium-sized Enterprises in Architecture, Engineering and Construction
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 183-193
summary	The general picture of Architecture Engineering and Construction (AEC) is of a sector that is a pyramid with control being in the hands of large players with a large base of Small and Medium Enterprises (SMEs). It ensues naturally that SMEs are key players in supporting the large companies. This suggests that, the AEC sector has a continuous demand for collaboration. Collaborative working has been implemented in numerous companies. These efforts have resulted in the wide recognition of the opportunity that emerging technologies offer the AEC sector. It is, however, commonly observed that SMEs are likely to magnify the sector trend and to be less technically forward thinking than large companies. The main focus of this paper is, therefore, to explore the use of IT within AEC, and the barriers and different implementation factors that can influence SMEs to develop, in response to business pressures using the opportunities provided by collaborative technologies.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	acadia14_479
id	acadia14_479
authors	Achten, Henri
year	2014
title	One and Many: An Agent Perspective on Interactive Architecture
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 479-486
doi	https://doi.org/10.52842/conf.acadia.2014.479
summary	Agent theory from Distributed Artificial Intelligence can form a strong theoretical foundation for the conception and following the design of interactive architecture. New concepts are introduced: style of interaction and attitude. For design support they can be unified under the notion of intentionality.
keywords	Interactive Architecture, Interaction Style, Building Attitude, Multi Agent Systems in Design
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
doi	https://doi.org/10.52842/conf.acadia.2021.530
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	ecaade2014_036
id	ecaade2014_036
authors	Afonso Maria de Castro Fernandes Abreu Gonçalves
year	2014
title	A Grammar for Shelters - An exploration of rule-based designs in prefabricated and modular shelters.
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 327-336
doi	https://doi.org/10.52842/conf.ecaade.2014.2.327
wos	WOS:000361385100034
summary	This work explores the possible use of the shape grammar formalism in generating small/medium sized dwellings or shelters as a possible and effective solution for shelter shortages that usually follows in the wake of a natural disaster. The shelters are generated using a set of pre-fabricated elements that add up to form a coherent and functional dwelling. The grammar exemplified here, being a shape grammar, deals specially with generating the underlying functional diagram and the floor plan of one possible solution based on a set of typologies design a priori.
keywords	Shape grammars; modular architecture; emergency architecture
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2014_075
id	sigradi2014_075
authors	Afsari, Kereshmeh; Chuck Eastman
year	2014
title	Categorization of building product models in BIM Content Library portals
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay- Montevideo 12,13,14 November 2014, pp. 370-374
summary	BIM Content Libraries are performing as online sources for building product models. In order to effectively use the product models, it is important to organize them systematically within these databases. But currently there is no standard or guideline for this purpose. Products in these libraries are being categorized based on different criteria such as the object classes in the target platform, by referring to multiple classification systems or based on customized categories. This paper studies some of the BIM Content Libraries and investigates the structure that each library is using for product categorization. It indicates the need for a generic framework for the purpose of product categorization in BIM Content Libraries.
keywords	BIM objects; Product models; Building models; BIM Content Library; Product category
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ascaad2014_004
id	ascaad2014_004
authors	Afsari, Kereshmeh; Matthew E. Swarts and T. Russell Gentry
year	2014
title	Integrated Generative Technique for Interactive Design of Brickworks
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 49-64
summary	Bricks have been used in the construction industry as a building medium for millennia. Distinct patterns of bricks depict the unique aesthetic intentions found in Roman, Gothic and Islamic architecture. In contemporary practice, the use of digital tools in design has enabled methodologies for creating new forms in architecture. CAD and BIM systems provide new opportunities for designers to create parametric objects for building form generation. In masonry design, there exists an inherent contradiction between traditional patterns in brick design, which are formal and prescribed, and the potential for new patterns generated using design scripting. In addition, current tools do not provide interactive techniques for the design of brickwork patterns that can manage constant changes parametrically, to inform and influence design process, by providing design feedback on the constructive and structural aspects of the proposed brick pattern and geometry. This research looks into the parametric techniques that can be applied to create different kinds of patterns on brick walls. It discusses a methodology for an interactive brickwork design within generative techniques. By integrating data between two computational platforms – the first based on image analysis and the second on parametric modeling, we demonstrate a methodology and application that can generate interactive arbitrary patterns and map it to the brick wall in real-time.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ecaade2015_18
id	ecaade2015_18
authors	Agkathidis, Asterios
year	2015
title	Generative Design Methods - Implementing Computational Techniques in Undergraduate Architectural Education
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 47-55
doi	https://doi.org/10.52842/conf.ecaade.2015.2.047
wos	WOS:000372316000007
summary	In continuation to the Deceptive Landscape Installation research project (Agkathidis, Kocatürk 2014), this paper investigates the implementation of generative design techniques in undergraduate architectural design education. After reviewing the main definitions of generative design synoptically, we have assessed the application of a modified generative method on a final year, undergraduate design studio, in order to evaluate its potential and its suitability within the framework of a research led design studio, leading to an RIBA accredited Part I degree. Our research findings based on analysis of the design outputs, student performance, external examiners reports as well as student course evaluation surveys indicate a positive outcome on the studio's design approach, as well as its suitability for an undergraduate design studio. They initiate a flourishing debate about accomplishments and failures of a design methodology, which still remains alien to many undergraduate curricula.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=e6f673d4-6e8e-11e5-be22-93874392c2e4
last changed	2022/06/07 07:54

For more results click below: