Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 149

Reformat results as: short short into frame detailed detailed into frame

_id	acadia14projects_71
id	acadia14projects_71
authors	Kalo, Ammar; Newsum, Michael Jake
year	2014
title	Robotic Incremental Sheet Metal Fabrication
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 71-74
doi	https://doi.org/10.52842/conf.acadia.2014.071
summary	Building on previous and current work, this research utilizes the Single Point Incremental Forming (SPIF) process to produce mass customized, double-curved (both positive and negative Gaussian curvature), three-dimensional forms from sheet metal.
keywords	Incremental Sheet Forming, Parametric, Computational Design, Fabrication, Sheet Metal, Architectural Skins, Digital fabrication and construction.
series	ACADIA
type	Research Projects
email
last changed	2022/06/07 07:52

_id	acadia14_531
id	acadia14_531
authors	Kalo, Ammar; Newsum, Michael Jake
year	2014
title	Bug-Out Fabrication: A Parallel Investigation using the Namib Darkling Beetle as a Biological Model and Incremental Sheet Metal Forming as a Fabrication Method.
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp.531-538
doi	https://doi.org/10.52842/conf.acadia.2014.531
summary	This paper presents a project that aims to capitalize on the interchanges between two independent yet concurrent design and fabrication studies. The research demonstrates pairing of design and fabrication workflows using a biological model from the Namib Darkling Beetle, as well as advancing the research on incremental sheet forming.
keywords	Incremental Sheet Forming, Namib Darkling Beetle, Computational Design, Fabrication, Sheet Metal, Shelter
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:52

_id	caadria2014_173
id	caadria2014_173
authors	Lim, Jason; Ammar Mirjan, Fabio Gramazio and Matthias Kohler
year	2014
title	Robotic Metal Aggregations
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 159–168
doi	https://doi.org/10.52842/conf.caadria.2014.159
summary	The recent convergence of computational design and digital fabrication has made new forms of architectural materialization possible. A workshop conducted at the Royal Melbourne Institute of Technology investigated how differentiated lightweight metal structures may be designed and fabricated under these new conditions. The workshop aim was to complete three such structures; each one is aggregated from aluminum profiles that are robotically assembled according to computationally driven geometric logics. The key challenge was to enable participants, assumed to lack programming and robotic fabrication experience, to design and construct their structures within imposed time constraints. This paper describes the subsequent development of accessible computational design tools and a robust robotic fabrication method for the workshop, and highlights the key decisions taken with their implementation. The workshop results are discussed and the design tools evaluated with respect to them. The paper concludes by recommending an approach to developing computational design tools which emphasizes the importance of usability and integration with the fabrication process.
keywords	Robotic fabrication; computational design; visual programming; lightweight structures
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2014_060
id	ecaade2014_060
authors	Koki Akiyoshi and Hiroya Tanaka
year	2014
title	Local-reconfigurable Freeform surface with plywood - From the perspective of Japanese Tsugite-Shiguchi
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 527-535
doi	https://doi.org/10.52842/conf.ecaade.2014.1.527
wos	WOS:000361384700052
summary	This research exhibits a novel construction method for Freeform surfaces with plywood, without using metal joints and bending. By introducing the perspective of Japanese Tsugite-Shiguchi, the research aims for a drastic change from node-oriented thinking to module-oriented thinking. This paper focuses on the investigation of how to simplify fabrication processes, how to realize the environmental capabilities of Freeform wood structures, and how to provide redundancy and stability to the whole architectural system. In order to challenge these problems, we examined three discretion methods. As a result, we have been successful to produce a double-layered surface, filled with triangular mesh, implemented only by cutting one sheet of plywood. Moreover, the system has also acquired a new nature: local-reconfigurability, wherein it can react and adapt to fit local parameters and requirements.
keywords	Digital fabrication; freeform timber; without metal and bending; discrete surface; minimal components for mega-assembly
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
doi	https://doi.org/10.52842/conf.acadia.2021.530
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	acadia14_409
id	acadia14_409
authors	Bard, Joshua; Gannon, Madeline; Jacobson-Weaver, Zachary; Jeffers, Michael; Smith, Brian; Contreras, Mauricio
year	2014
title	Seeing is Doing: Synthetic Tools for Robotically Augmented Fabrication in High-Skill Domains
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 409-416
doi	https://doi.org/10.52842/conf.acadia.2014.409
summary	The historical split between visualization and actualization in architectural design has encouraged a disciplinary split between representation (the domain of the designer) and construction (a domain entirely removed from the Architect’s purview). This split between seeing and doing in architectural design can be questioned in the context of contemporary robotic technologies where physical and digital workflows comingle in high-skill, collaborative domains.
keywords	Architectural Robotics, Human-Robot Collaboration, MOCAP, Adaptive Fabrication, High-Skill Domain, Robotics and Autonomous Design Systems
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	ecaade2014_053
id	ecaade2014_053
authors	Baris Cokcan, Johannes Braumann and Sigrid Brell-Cokcan
year	2014
title	Performative Wood
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 131-138
doi	https://doi.org/10.52842/conf.ecaade.2014.2.131
wos	WOS:000361385100013
summary	This research builds upon projects from both university and practice to explore new approaches on how the multifunctionality, flexibility, and performance of wood can be utilized to inform new approaches towards both design and fabrication. The following projects use physical prototypes to bend wood just within its tolerances, design with the high precision of multi-axis robotic fabrication in mind, and finally inform the shape of a large free-form structure through material properties.
keywords	Wood; high-performance material; cnc; robotic fabrication; geometric design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia14projects_269
id	acadia14projects_269
authors	Bennani, Sofia; Singer-Bieder, Alexandra; Michel, Agathe
year	2014
title	ViscoPlasty
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 269-270
doi	https://doi.org/10.52842/conf.acadia.2014.269
summary	ViscoPlasty proposes an installation using Straw-k: a flexible, fast, and feasible fabrication process, which operates on the plasticity of discrete, standard components to create a dynamic, aggregate surface.
keywords	fabrication process, plasticity, bespoke pipe comonent, robotic paths
series	ACADIA
type	Tex-Fab
email
last changed	2022/06/07 07:54

_id	acadia14_579
id	acadia14_579
authors	Brell-Cokcan, Sigrid; Braumann, Johannes
year	2014
title	Robotic Production Immanent Design: Creative toolpath Design in Micro and Macro Scale
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 579-588
doi	https://doi.org/10.52842/conf.acadia.2014.579
summary	This paper discusses applications of production immanent design in the context of robotic fabrication and offers an outlook to a new research project on robotic stone structuring.
keywords	production immanent design, robotic fabrication, parametric robot control, visual programming, Grasshopper
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	sigradi2014_213
id	sigradi2014_213
authors	Daas, Mahesh
year	2014
title	Toward a taxonomy of architectural robotics
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay- Montevideo 12,13,14 November 2014, pp. 623-626
summary	Robotics in architecture is a fast-emerging area of research and design today. The current research and practices of robotics in architecture tend to be, to a great degree, techno-positivist and framed by a narrowly defined instrumentalist view. The paper presents comprehensive taxonomy of a broad range of robotic applications so as to meaningfully guide, systematize, and clarify multi-faceted design or research explorations in architecture and beyond. The paper advances four frameworks: role of robotics in architecture; modes of interaction between robots, humans and architecture; the Vitruvian framework; and robots classified by form; all of which point to new avenues of potential exploration while also revealing the gaps and biases in the current research and design in the discipline.
keywords	Robots; Architectural Robotics; Taxonomies; Robotic Fabrication
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	ecaade2023_000
id	ecaade2023_000
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 1
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, 905 p.
doi	https://doi.org/10.52842/conf.ecaade.2023.1.001
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2023_001
id	ecaade2023_001
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 2
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, 899 p.
doi	https://doi.org/10.52842/conf.ecaade.2023.2.001
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
type	normal paper
email
last changed	2024/08/29 08:36

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	acadia14projects_231
id	acadia14projects_231
authors	Friedman, Jared; Hosny, Ahmed; Lee, Amanda
year	2014
title	Robotic Bead Rolling
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 231-234
doi	https://doi.org/10.52842/conf.acadia.2014.231
summary	The work presented provides an overview of the design to production workflow that has been developed, as well as sample panels that have been produced using the tools developed by the researchers.
keywords	Robotics, Bead Rolling, Finite Element Analysis, Metal, Tooling, Digital Workflow, Robotics and Autonomous Design Systems
series	ACADIA
type	Student's Research Projects
email
last changed	2022/06/07 07:50

_id	acadia14projects_223
id	acadia14projects_223
authors	Friedman, Jared; Kim, Heamin; Mesa, Olga
year	2014
title	Woven Clay
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 223-226
doi	https://doi.org/10.52842/conf.acadia.2014.223
summary	The accompanying poster outlines the research behind a robotic clay deposition technique that weaves clay coils in order to build up a surface. The façade panels produced by the research team act as a proxy for potential applications of the fabrication technique.
keywords	Robotics, Ceramics, Additive Manufacturing, 3D Printing, Weaving, Craft in a Digital Age
series	ACADIA
type	Student's Research Projects
email
last changed	2022/06/07 07:50

_id	acadia14projects_11
id	acadia14projects_11
authors	Gheorghe, Andrei
year	2014
title	Robotic Infiltrations
source	ACADIA 14: Design Agency [Projects of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9789126724478]Los Angeles 23-25 October, 2014), pp. 11-14
doi	https://doi.org/10.52842/conf.acadia.2014.011
summary	This research describes the outcome of the Angewandte Architecture Challenge 2013 “Robotic Infiltrations” experimental workshop in Digital Design and Fabrication Strategies. The workshop is a collaboration between the University of Innsbruck’s REX\|LAB and the Institute of Architecture at the University of Applied Arts Vienna, and represents a continuation of research that explores the potential of additive digital production through the use of robotically controlled placement of phase-change polymers in the production of full scale structures.
keywords	Digital fabrication and construction, Digital architectural design, Digital design education, Digital design and production, Full scale digital fabrication, Digital fabrication research, Robotic fabrication
series	ACADIA
type	Research Projects
email
last changed	2022/06/07 07:51

_id	caadria2014_120
id	caadria2014_120
authors	Hack, Norman; Willi Viktor Lauer, Fabio Gramazio and Matthias Kohler
year	2014
title	Mesh Mould: Differentiation for Enhanced Performance
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 139–148
doi	https://doi.org/10.52842/conf.caadria.2014.139
summary	Mesh-Mould is a novel robotic fabrication system for complex, non-standard concrete structures. The system folds together formwork and reinforcement, the two most labour intensive aspects of concrete constructions and offers an alternative approach to the current modes of prefabrication by suggesting an in-situ fabrication process (Figure 1). The paper outlines the development of the Form-work/Reinforcing Meshes through several iterations of physical and digital tests. Initially starting from simple triangulated 3D lattices, the structures evolved to become more complex and differentiated. The incorporating of flow enhancing ducts and surface perimeters with diverse surface aperture densities facilitates an optimal concrete flow and material distribution within the mesh.
keywords	Robotic fabrication; concrete formwork; differentiation; spatial extrusion
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2014_215
id	ecaade2014_215
authors	James Hayes, Stephen Fai and Phil White
year	2014
title	Digitally-Assisted Stone Carving on Canada's Parliament Hill
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 643-651
doi	https://doi.org/10.52842/conf.ecaade.2014.1.643
wos	WOS:000361384700064
summary	In this paper, we discuss the results of a collaboration between the Carleton Immersive Media Studio (CIMS), the Dominion Sculptor of Canada, and the Heritage Conservation Directorate (HCD) of Public Works and Government Services Canada (PWGSC), on the development of a digitally-assisted stone carving process. The collaboration couples the distinguished skill of the Dominion Sculptor with digital acquisition and digital fabrication technologies in the reconstruction of a stone relief sculpture on the façade of the East Block building of the Canadian Parliament in Ottawa, Canada. A variety of digital technologies were used including, hand-held laser scanning, digital photogrammetry, 3d-printing, CNC milling, and robotic stone milling, in initial research for the fabrication of maquettes and the collaboration with the Dominion Sculptor.
keywords	Digital heritage; digital fabrication; masonry conservation
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2014_177
id	caadria2014_177
authors	Jonas, Katrin; Alan Penn and Paul Shepherd
year	2014
title	Designing with Discrete Geometry
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 513–522
doi	https://doi.org/10.52842/conf.caadria.2014.513
summary	There has been a shift in aesthetics from the modern orthogonal building envelope to more elaborate curved and folded forms. Non_orthogonal forms are often associated with complete freedom of geometry, entrusting the advancement in custom manufacturing and robotic fabrication of one-off building parts to realise the design. This paper presents a methodology that allows non_orthogonal surfaces to be designed using a constrained library of discrete, tessellating parts. The method enables the designer both to produce ‘approximations’ of freeform designs in a top_down manner or to generate ‘candidate’ designs in a bottom_up process. It addresses the challenge in the field of design engineering to generate architectural surfaces which are complex, yet simple and economical to construct. The system relates to the notion that complexity derives from simple parts and simple rules of interaction. Here complexity relates to the holistic understanding of a structure as an interaction between its local parts, global form and visual, as well as functional performance.
keywords	Geometry system; form generation; form growth; discrete growth model; design tool; complex geometry
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2014_159
id	ecaade2014_159
authors	Leyla Yunis, Ond_ej Kyjánek, Moritz Dörstelmann, Marshall Prado, Tobias Schwinn and Achim Menges
year	2014
title	Bio-inspired and fabrication-informed design strategies for modular fibrous structures in architecture
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 423-432
doi	https://doi.org/10.52842/conf.ecaade.2014.1.423
wos	WOS:000361384700042
summary	Research pavilions can serve as architectural scale demonstrations for the materialization of experimental forms and structures. Pavilions seek to prove and change methods of design and construction mechanisms in order to achieve desires such as material efficiency, novel spatial qualities and performative needs. The case of the ICD/ITKE Research Pavilion 2013-14 highlights the use of fiber composites in order to achieve a core-less filament winding modular system from bio-inspired lightweight structures through robotic fabrication. This paper describes the multi-disciplinary design and construction process of this pavilion that created a structure of out 36 unique components.
keywords	Bio-inspired; fiber composites; multi-disciplinary design; robotic fabrication; modular system construction
series	eCAADe
email
last changed	2022/06/07 07:52

For more results click below: