Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 662

Reformat results as: short short into frame detailed detailed into frame

_id	ijac201412201
id	ijac201412201
authors	Schindler, Christoph; Martin Tamke, Ali Tabatabai, et al.
year	2014
title	Processing Branches: Reactivating the performativity of natural wooden form with contemporary information technology
source	International Journal of Architectural Computing vol. 12 - no. 2, 101-116
summary	Angled and forked wood – a desired material until 19th century, was swept away by industrialization and its standardization of processes and materials. Contemporary information technology has the potential for the capturing and recognition of individual geometries through laser scanning and computation and subsequently design and bespoke CNC fabrication. The question whether this allows for a new approach to the uniqueness that is offered to us by nature is discussed in a series of workshops and projects, which explore the performative potential of naturally grown materials.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2023_000
id	ecaade2023_000
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 1
doi	https://doi.org/10.52842/conf.ecaade.2023.1.001
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, 905 p.
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2023_001
id	ecaade2023_001
authors	Dokonal, Wolfgang, Hirschberg, Urs and Wurzer, Gabriel
year	2023
title	eCAADe 2023 Digital Design Reconsidered - Volume 2
doi	https://doi.org/10.52842/conf.ecaade.2023.2.001
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 2, Graz, 20-22 September 2023, 899 p.
summary	The conference logo is a bird’s eye view of spiral stairs that join and separate – an homage to the famous double spiral staircase in Graz, a tourist attraction of this city and a must-see for any architecturally minded visitor. Carved out of limestone, the medieval construction of the original is a daring feat of masonry as well as a symbolic gesture. The design speaks of separation and reconciliation: The paths of two people that climb the double spiral stairs separate and then meet again at each platform. The relationship between architectural design and the growing digital repertoire of tools and possibilities seems to undergo similar cycles of attraction and rejection: enthusiasm about digital innovations – whether in Virtual Reality, Augmented Reality, Energy Design, Robotic Fabrication, the many Dimensions of BIM or, as right now, in AI and Machine Learning – is typically followed by a certain disillusionment and a realization that the promises were somewhat overblown. But a turn away from these digital innovations can only be temporary. In our call for papers we refer to the first and second ‘digital turns’, a term Mario Carpo coined. Yes, it’s a bit of a pun, but you could indeed see these digital turns in our logo as well. Carpo would probably agree that design and the digital have become inseparably intertwined. While they may be circling in different directions, an innovative rejoinder is always just around the corner. The theme of the conference asked participants to re-consider the relationship between Design and the Digital. The notion of a cycle is already present in the syllable “re”. Indeed, 20 years earlier, in 2003, we held an ECAADE conference in Graz simply under the title “Digital Design” and our re-using – or is it re-cycling? – the theme can be seen as the completion of one of those cycles described above: One level up, we meet again, we’ve come full circle. The question of the relationship between Design and the Digital is still in flux, still worthy of renewed consideration. There is a historical notion implicit in the theme. To reconsider something, one needs to take a step back, to look into the past as well as into the future. Indeed, at this conference we wanted to take a longer view, something not done often enough in the fast-paced world of digital technology. Carefully considering one’s past can be a source of inspiration. In fact, the double spiral stair that inspired our conference logo also inspired many architects through the ages. Konrad Wachsmann, for example, is said to have come up with his famous Grapevine assembly system based on this double spiral stair and its intricate joinery. More recently, Rem Koolhaas deemed the double spiral staircase in Graz important enough to include a detailed model of it in his “elements of architecture” exhibition at the Venice Biennale in 2014. Our interpretation of the stair is a typically digital one, you might say. First of all: it’s a rendering of a virtual model; it only exists inside a computer. Secondly, this virtual model isn’t true to the original. Instead, it does what the digital has made so easy to do: it exaggerates. Where the original has just two spiral stairs that separate and join, our model consists of countless stairs that are joined in this way. We see only a part of the model, but the stairs appear to continue in all directions. The implication is of an endless field of spiral stairs. As the 3D model was generated with a parametric script, it would be very easy to change all parameters of it – including the number of stairs that make it up. Everyone at this conference is familiar with the concept of parametric design: it makes generating models of seemingly endless amounts of connected spiral stairs really easy. Although, of course, if we’re too literal about the term ‘endless’, generating our stair model will eventually crash even the most advanced computers. We know that, too. – That's another truth about the Digital: it makes a promise of infinity, which, in the end, it can’t keep. And even if it could: what’s the point of just adding more of the same: more variations, more options, more possible ways to get lost? Doesn’t the original double spiral staircase contain all those derivatives already? Don’t we know that ‘more’ isn’t necessarily better? In the original double spiral stair the happy end is guaranteed: the lovers’ paths meet at the top as well as when they exit the building. Therefore, the stair is also colloquially known as the Busserlstiege (the kissing stair) or the Versöhnungsstiege (reconciliation stair). In our digitally enhanced version, this outcome is no longer clear: we can choose between multiple directions at each level and we risk losing sight of the one we were with. This is also emblematic of our field of research. eCAADe was founded to promote “good practice and sharing information in relation to the use of computers in research and education in architecture and related professions” (see ecaade.org). That may have seemed a straightforward proposition forty years ago, when the association was founded. A look at the breadth and depth of research topics presented and discussed at this conference (and as a consequence in this book, for which you’re reading the editorial) shows how the field has developed over these forty years. There are sessions on Digital Design Education, on Digital Fabrication, on Virtual Reality, on Virtual Heritage, on Generative Design and Machine Learning, on Digital Cities, on Simulation and Digital Twins, on BIM, on Sustainability, on Circular Design, on Design Theory and on Digital Design Experimentations. We hope you will find what you’re looking for in this book and at the conference – and maybe even more than that: surprising turns and happy encounters between Design and the Digital.
series	eCAADe
type	normal paper
email
last changed	2024/08/29 08:36

_id	ecaade2015_18
id	ecaade2015_18
authors	Agkathidis, Asterios
year	2015
title	Generative Design Methods - Implementing Computational Techniques in Undergraduate Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.2015.2.047
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 47-55
summary	In continuation to the Deceptive Landscape Installation research project (Agkathidis, Kocatürk 2014), this paper investigates the implementation of generative design techniques in undergraduate architectural design education. After reviewing the main definitions of generative design synoptically, we have assessed the application of a modified generative method on a final year, undergraduate design studio, in order to evaluate its potential and its suitability within the framework of a research led design studio, leading to an RIBA accredited Part I degree. Our research findings based on analysis of the design outputs, student performance, external examiners reports as well as student course evaluation surveys indicate a positive outcome on the studio's design approach, as well as its suitability for an undergraduate design studio. They initiate a flourishing debate about accomplishments and failures of a design methodology, which still remains alien to many undergraduate curricula.
wos	WOS:000372316000007
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=e6f673d4-6e8e-11e5-be22-93874392c2e4
last changed	2022/06/07 07:54

_id	ascaad2014_033
id	ascaad2014_033
authors	Al-Mousa , Sukainah Adnan
year	2014
title	Temporary Architecture: An urban mirage
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 405-413
summary	One of the emerging multidisciplinary contemporary art practices is interactive installation art, which is concerned with constructing a temporary artistic environment that is digital, responsive and engaging. It is usually displayed within existing architectural context whether indoor in a gallery space or outdoor in a public space. Recent examples of such art projects show that interactivity and illusion are effectively present and highly influential in the perception and memory of the place. A digital display on a building façade can remain attached to the history of the site in the spectator’s memory even after the display is removed. An interactive space that involves body response and emotional sensory interaction can determine the narrative perceived from the experience. These trends seemingly bring together the physical context and the digital space to contain the spectator. The two mediums are merged to provide a new genre of space, hence a new mode of perception where the art space mediates people’s movement and overlay the context with new meanings. Multiple backgrounds are involved in the creative process of interactive installation art, all of which involve examining various concepts through artistic engagement with temporary spaces. Here, particularly because of interactivity and immerseveness, the spectator becomes part of the performance (the subject); with his moving and reacting he activates the narrative and probably gives it its shape. This paper aims to explore the potentials of the digital spatial display to enhance or weaken our sense of belonging to the surrounding environments while creating an illusionary space within the real physical one. It also aims to discuss how this influence would affect the memory of the mixed experience; the installation being digital, temporary and illusive and the space being physical, permanent and real. What happens to the “spectator” when contained by the digital-interactive and the physical medium(s)?. In order to unfold the mentioned questions, the study uses theories of perception and performance reflected on live case studies of recent art projects where the researcher becomes a member of the audience and an observer at the same time in order to trace the journey inside this new medium. In an era where time is being more difficult to grasp and identities of visual culture is becoming more difficult to define, temporary responsive environments can provide some openings where space becomes durational, yet, influential, and where people’s movements become more meaningful in the visual terrain.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ecaade2014_187
id	ecaade2014_187
authors	Asli Cekmis
year	2014
title	Fuzzy computing for layout design in ill-defined, uncertain spaces
doi	https://doi.org/10.52842/conf.ecaade.2014.1.277
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 277-286
summary	Layout design has been supported by some computational tools, where fuzzy systems have been approved as an appropriate method to handle uncertainty in the early design stage. In this paper, a new mathematical model depending on the fuzzy logic and sets theory is proposed to assist in layout design. The model distinctly deals with spatial uncertainty in open planned designs, where there is no clear layout configuration or definite patterns of usage. The model calculates the possibility of occupancy according to space, function and user related parameters and logical rules. It also visualises the architectural plan as being comprised of sub-spaces formed by the distribution of those possibilities. Sub-spaces are characterised as “Fuzzy Architectural Spatial Objects” (FASOs). As a result, layouts are represented as an accumulation of FASOs showing a certain inhabitation pattern. Various layouts can be generated within the identity of FASOs. Architects can evaluate the layouts and propose new ones by organising the FASOs on the plan and considering their relations. After describing the model the paper demonstrates an application which aims to design a proper layout for a major exhibition hall in Istanbul.
wos	WOS:000361384700027
keywords	Spatial uncertainty; open-plans; inhabitation patterns; layout design; fuzzy architectural spatial objects (fasos)
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2015_037
id	cf2015_037
authors	de Vries, Bauke; Grond, Manon and van der Zee, Aant
year	2015
title	Development of a multi-disciplinary university wide design course
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 37-46.
summary	Design is one of the basic skills of every engineer. However until now design is only seen as a core course in Architecture studies and lately in Industrial Engineering studies. This paper reports about the development of a design course for all departments of a typical technical university. After a short overview of design teaching tradition, an inventory is presented of the different interpretation of design by the various departments. The course development is presented over two periods: 2012-2014, and 2014-2015. In between a major change was conducted. The course learning goals and student evaluations are presented. In the discussion we reflect on fundamental and practical problems that occur in design teaching for such a wide audience. Finally we draw conclusions on the changing role of design what is needed to give design the same status as mathematics in a technical curriculum.
keywords	Design, Design teaching, Multi-disciplinary design
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	ascaad2014_025
id	ascaad2014_025
authors	Elias-Ozkan, Soofia T. and Hatem Hadia
year	2014
title	Teaching and Learning Building Performance Virtualisation
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 323-330
summary	Building performance simulation tools have indeed eased the task of evaluating a building’s performance from the point of view of lighting design, heating and cooling loads, total energy loads, acoustic properties, natural lighting, ventilation, smoke and fire containment etc. However, to use these tools correctly, not only is theoretical knowledge required but also insight that can only be attained after substantial experience. For example, in order to evaluate the thermal performance alone, one needs to understand climatology, material properties, building physics, HVAC systems, internal and external gain factors, solar impacts, etc. to name a few. Hence, teaching students of Architecture how to use these tools, and also to interpret the results properly, is a tall order. This paper reports on insights gained through teaching courses on building performance simulations to graduate students in the Department of Architecture. The course content was varied each term and a different simulation software was used; namely: ECOTECT, Energy Plus and Design Builder. Data presented here will also contain feedback from the course students regarding the modelling process of the buildings, inputting the data, simulating their performance, and evaluating the results. Also, the difficulties faced during the various steps as well as the drawbacks of the tools will be discussed in depth.
series	ASCAAD
type	normal paper
email
last changed	2021/07/16 10:36

_id	caadria2014_252
id	caadria2014_252
authors	Erhan, Halil; Andy Huang and Robert F. Woodbury
year	2014
title	DiNa Framework and Prototype to Support Collaboration in the Wild
doi	https://doi.org/10.52842/conf.caadria.2014.471
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 471–480
summary	Much of the available collaboration support tools focus on sharing of documents and managing projects that require planned activities. These tools fall short in meeting principle of least effort or taking into account of the reality of complex work patterns. We propose DiNa framework and system architecture for a topic centric as opposed to document-centric collaboration system using readily available devices. DiNa aims to complement existing approaches. Our primary goal is to seek answers for how these devices can better support collaboration without overloading the workflow. After a literature review and roleplaying exercises, the prototypes we developed demonstrate new interaction techniques for defining topics and address them in collaborators’ own terms. It uses different visualizations of the artefacts and their association with the topics, among which is a scalable timeline interface accessible from different platforms, to make the artefacts collected more meaningful in a given context. In this paper we present our recent prototype as a proof-of-concept and its initial evaluations followed by the lessons learnt from our studies on supporting collaboration in the wild. The evaluation outcome is suggestions for improving DiNa-based systems for effective collaboration.
keywords	Collaboration; collaboration support tools; design; mobile computing; distributed cognition
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	sigradi2014_018
id	sigradi2014_018
authors	Florio, Wilson
year	2014
title	Reflexão sobre seis residências emblemáticas a partir da tecnologia BIM e da fabricação digital [Reflection on emblematic residences from static / dynamic simulations and digital fabrication]
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 311-315
summary	The aim of this paper is to report the teaching experience held in 2012 at Unicamp between three disciplines of representation. Students analyzed emblematic residences from digital and physical models. Digital models were produced in Revit and its building components were diagrammed in AutoCad. After that, these elements were sent to laser cutter, and hand assembled. In 3DS Max, 3D model allowed simulations such as rendered images and animations. We report the contributions of these analog and digital artifacts in the design process. This article contributes to reflection and debate on the application of digital technologies in the analysis of iconic buildings of architecture.
keywords	Geometric Modeling; Digital Fabrication; Model; Revit; Teaching-learning
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	sigradi2014_232
id	sigradi2014_232
authors	Ledo, Rafael Zanelato; Alice Cybis Pereira
year	2014
title	Objetos de Aprendizagem voltados ao ensino de modelagem digital 3D para arquitetura baseado no estilo cognitivo visual [Learning Objects directed to teaching digital 3D modeling for architecture based on visual cognitive style]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 86-90
summary	This article describes an initiative to identify which cognitive abilities influence performance in 3D modeling for architecture activities. This work tests the visual, spatial and logical reasoning skills of students of architecture. After these tests, the results will compared with the results of 3D modeling test. By identifying, some cognitive abilities that has a direct relation to performance in 3D modeling will be possible to create learning objects that improve these characteristics.
keywords	3D Modeling; Cognitive Syles; Visuospatial Thinking; Performance; Architecture
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	sigradi2014_042
id	sigradi2014_042
authors	Moreira, Alejandro Ariel; Cecilia Parera
year	2014
title	Liberen a los estudiantes de su disciplina! La formación de los arquitectos en la era 2.0 [Free students from their discipline! Architects´ academic training in the 2.0 era]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 187-190
summary	In the context of recent transformations in the professional practice of architecture after the incorporation of new developments in digital technology, the rigid disciplinary and scope of intervention delimitations that characterize most academic proposals have lost support. This paper intends to contribute, in general, to the consideration about the referred problem, and, in particular, to the discussion about the urge to review the curricula of the architectural programs of most Latin-American universities, still defined by the concept of an autonomous and individual architect.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	caadria2014_204
id	caadria2014_204
authors	Osório, Filipa; Alexandra Paio and Sancho Oliveira
year	2014
title	KOS- Kinetic Origami Surface
doi	https://doi.org/10.52842/conf.caadria.2014.201
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 201–210
summary	In an increasingly technological, informed and demanding society Architecture should be able to answer to its space requirements using materials and technological resources that today has at its service. Kinetic systems have been used by architects as an approach that embeds computation intelligence to create flexible and adaptable architectural spaces according to users’ changing needs and desires. This paper describes one possible way of exploring kinetic systems to develop a foldable surface with geometric patterns based on the rules of rigid origami. This surface aims to take advantage of the elastic capacities given to a planar material by its folding. After folding the surface can assume different forms in order to create a range of spatial configurations ordered by a user through a remote control.
keywords	Kinetic systems; interactive architecture; origami geome-try; folded surfaces
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	caadria2020_363
id	caadria2020_363
authors	Pal, Abhipsa, Chan, Wi Leen, Tan, Ying Yi, Chia, Pei Zhi and Tracy, Kenneth Joseph
year	2020
title	Knit Concrete Formwork
doi	https://doi.org/10.52842/conf.caadria.2020.1.213
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 213-222
summary	The manufacture of concrete funicular shells often relies on traditional formwork construction techniques to provide a sculptured cavity for the fluid material to occupy (Bechthold, 2004). While this enables a predictable geometric outcome, the extensive use of timber and/or steel to construct these formworks account for up to 60% of the total production cost of concrete and are discarded after the casting is complete (Lloret et al. 2014). Thus, we propose an alternative method to create prefabricated modular systems out of concrete casted in customised tubular knitted membranes. These perform as a network of struts that can be affixed onto 3D printed nodes of a singular design. Altogether, these components serve as a kit-of-parts that can be transported to site and assembled together to create shell geometries.
keywords	Knitted Textile; Fabric Formwork; Concrete Casting
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	sigradi2014_152
id	sigradi2014_152
authors	Paraizo, Rodrigo Cury; Maria Cristina Nascentes Cabral, Erivelton Muniz da Silva
year	2014
title	Arquitetos estrangeiros no Rio de Janeiro no século XX: bancos de dados de objetos culturais [Foreign architects in Rio de Janeiro in the 20th century: cultural objects database]
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 475-478
summary	This paper describes a database to catalog buildings designed and constructed by foreign architects that helped shape Rio de Janeiro in the 20th century. The website is in its preliminary stages, just after data collection, and the data structure and interface focus on further expanding possibilities for recording and showing the relationships among records, apart from records themselves. From the experience with the project, the paper also aims to discuss databases, in particular those representing cultural objects, as expressive forms, and some of their expressive mechanisms.
keywords	Databases of cultural objects; Rio de Janeiro; Hyperdocuments
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	sigradi2014_252
id	sigradi2014_252
authors	Pina Calafi, Alfredo; Benoit Bossavit, Isabel Sanchez Gil, Aitziber Urtasun, Benoit Bossavit
year	2014
title	Oteiza en movimiento: una herramienta tecnológica para el aprendizaje participativo en el Museo Oteiza [Oteiza in motion a tool for a collaborative learning at the Oteiza museum]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 255-258
summary	This paper presents an interdisciplinary work done at the Museum Oteiza near Pamplona, Spain during 2012 and 2013. The main goal is the use of low cost devices that allows natural interaction, Virtual and Augmented Realities to get the general public closer to the works and concepts of Oteiza through interactive serious games. The most difficult Oteiza’s concepts to understand are those related with the empty space or with time & space. We propose three different activities, shaped as serious game, that use the whole body to interact and play with these concepts. The result is a facility that has been installed at the entrance of the Museum and that can be used for free, before or after a visit to the museum. These activities were presented to 4 experts in Oteiza and the results are discussed. In addition, we gathered more comments after several groups of children tried the application in the museum.
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	cdrf2023_273
id	cdrf2023_273
authors	Pixin Gong, Xiaoran Huang, Chenyu Huang, Shiliang Wang
year	2023
title	Modeling on Outdoor Thermal Comfort in Traditional Residential Neighborhoods in Beijing Based on GAN
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_23
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
summary	With the support of new urban science and technology, the bottom-up and human-centered space quality research has become the key to delicacy urban governance, of which the Universal Thermal Climate Index (UTCI) have a severe influence. However, in the studies of actual UTCI, datasets are mostly obtained from on-site measurement data or simulation data, which is costly and ineffective. So, how to efficiently and rapidly conduct a large-scale and fine-grained outdoor environmental comfort evaluation based on the outdoor environment is the problem to be solved in this study. Compared to the conventional qualitative analysis methods, the rapidly developing algorithm-supported data acquisition and machine learning modelling are more efficient and accurate. Goodfellow proposed Generative Adversarial Nets (GANs) in 2014, which can successfully be applied to image generation with insufficient training data. In this paper, we propose an approach based on a generative adversarial network (GAN) to predict UTCI in traditional blocks. 36000 data samples were obtained from the simulations, to train a pix2pix model based on the TensorFlow framework. After more than 300 thousand iterations, the model gradually converges, where the loss of the function gradually decreases with the increase of the number of iterations. Overall, the model has been able to understand the overall semantic information behind the UTCI graphs to a high degree. Study in this paper deeply integrates the method of data augmentation based on GAN and machine learning modeling, which can be integrated into the workflow of detailed urban design and sustainable construction in the future.
series	cdrf
email
last changed	2024/05/29 14:04

_id	acadia21_246
id	acadia21_246
authors	Safley, Nick
year	2021
title	Reconnecting...
doi	https://doi.org/10.52842/conf.acadia.2021.246
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by B. Bogosian, K. Dörfler, B. Farahi, J. Garcia del Castillo y López, J. Grant, V. Noel, S. Parascho, and J. Scott. 246-255.
summary	This design research reimagines the architectural detail in a postdigital framework and proposes digital methods to work upon discrete tectonics. Drawing upon Marco Frascari's writing The Tell-the-Tale Detail, the study aims to reimagine tectonic thinking for focused attention after the digital turn. Today, computational tools are powerful enough to perform operations more similar to physical tools than in the earlier digital era. These tools create a "digital materiality," where architects can manipulate digital information in parallel and overlapping ways to physical corollaries. (Abrons and Fure, 2018) To date, work in this area has focused on materiality specifically. This project reinterprets tectonics using texture map editing and point cloud information, particularly reconceptualizing jointing using images. Smartphone-based 3D digital scanning was used to captured details from a series of Carlo Scarpa's influential works, isolating these details from their physical sites and focusing attention upon individual tectonic moments. As digital scans, these details problematize the rhetoric of smoothness and seamlessness prevalent in digital architecture as they are discretely construed loci yet composed of digital meshes. (Jones 2014) Once removed from their contexts, reconnecting the digital scans into compositions of "compound details" necessitated a series of new mechanisms for constructing and construing not native to the material world. Using Photoshop editing of texture-mapped images, digital texturing of meshes, and interpretation of the initial material constructions, new joints within and between these the digital scanned details were created to reframe the original detail for the post-digital.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ecaade2014_023
id	ecaade2014_023
authors	Salma El Ahmar and Antonio Fioravanti
year	2014
title	Botanics and Parametric Design Fusions for Performative Building Skins - An application in hot climates
doi	https://doi.org/10.52842/conf.ecaade.2014.2.595
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 595-604
summary	Biomimicry and computational design are two growing fields of research and practice in architecture for their potential in performative and sustainable design, among many other benefits. Cooling loads are posing serious energy problems in hot climatic cities as in Cairo and Alexandria. Attempting to solve these problems, this research turned to botanical inspirations for ideas in order to improve thermoregulation of the building skin. One of these ideas was chosen and implemented using computational software in the design of a parametric vertical shading screen for a typical office room in Cairo. The challenge was to minimize cooling loads as much as possible without compromising daylight requirements. An evolutionary solver was used to optimize results and environmental simulations were performed before and after the proposed screen to assess its performance and evaluate this biomimetic-computational approach to design.
wos	WOS:000361385100062
keywords	Biomimicry; building skin; thermoregulation; parametric design; hot climates
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ecaade2014_089
id	ecaade2014_089
authors	Sven Schneider, Martin Bielik, Dirk Donath, Michel Triemer, Julia Tschetwertak and Alexander Hollberg
year	2014
title	Rapid Data Collection using Automated Model Generation and Performance Evaluation - A workflow for morphological studies of apartment floor plans
doi	https://doi.org/10.52842/conf.ecaade.2014.2.303
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 303-311
summary	In this paper we propose a framework for accelerating the process of data-collection from apartment floor plans. After describing the general workflow and the criteria used for performance evaluation, we present a tool for automated model generation and evaluation. To demonstrate the functionality of this workflow we show examples, based on a preliminary test phase undertaken in a seminar for master students.
wos	WOS:000361385100032
keywords	Data collection; apartment floor plans; space syntax; automated model generation, automated performance evaluation
series	eCAADe
email
last changed	2022/06/07 07:56

For more results click below: