Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 668

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2014_001
id	ecaade2014_001
authors	Thompson, Emine Mine (ed.)
year	2014
title	Fusion, Volume 2
source	Proceedings of the 32nd International Conference on Education and research in Computer Aided Architectural Design in Europe, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, 632 p.
doi	https://doi.org/10.52842/conf.ecaade.2014.1
summary	This is the second volume of the conference proceedings of the 32nd eCAADe conference, held from 10-12 September 2013 at the Department of Architecture and Built Environment, Faculty of Engineering and Environment, Northumbria University in Newcastle upon Tyne, England. Both volumes together contain 130 papers that were submitted and accepted to this conference. The theme of the 32nd eCAADe conference is Fusion- data integration at its best. All quests for data integration in architecture and the construction industry lead ultimately to FUSION, a synthesis of knowledge that transcends mere combination. FUSION is the dream of a knowledge system that will enable multiple sets of data, in manifold formats, to be presented in a unified view. This conference is exploring the possibilities for advanced levels of data integration in the service of the representation and management of the natural environment, and the design, visualisation and making of the built environment. These proceedings are presenting the contributions which explore the elusive goal of FUSION in architecture and related fields. The second volume of the proceedings contains 65 papers grouped under nine sub-themes (Generative Design- Parametric Modelling, Material, Collaboration and Participation, VR, Spatial Analysis, Shape, Form and Geometry 2, BIM, Design Tool 2 and Smart and Responsive Design).
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:49

_id	acadia14_409
id	acadia14_409
authors	Bard, Joshua; Gannon, Madeline; Jacobson-Weaver, Zachary; Jeffers, Michael; Smith, Brian; Contreras, Mauricio
year	2014
title	Seeing is Doing: Synthetic Tools for Robotically Augmented Fabrication in High-Skill Domains
source	ACADIA 14: Design Agency [Proceedings of the 34th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 9781926724478]Los Angeles 23-25 October, 2014), pp. 409-416
doi	https://doi.org/10.52842/conf.acadia.2014.409
summary	The historical split between visualization and actualization in architectural design has encouraged a disciplinary split between representation (the domain of the designer) and construction (a domain entirely removed from the Architect’s purview). This split between seeing and doing in architectural design can be questioned in the context of contemporary robotic technologies where physical and digital workflows comingle in high-skill, collaborative domains.
keywords	Architectural Robotics, Human-Robot Collaboration, MOCAP, Adaptive Fabrication, High-Skill Domain, Robotics and Autonomous Design Systems
series	ACADIA
type	Normal Paper
email
last changed	2022/06/07 07:54

_id	ecaade2014_111
id	ecaade2014_111
authors	Fabian Danker and Oliver Jones
year	2014
title	Combining Augmented Reality and Building Information Modelling - An industry perspective on applications and future directions.
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 525-536
doi	https://doi.org/10.52842/conf.ecaade.2014.2.525
wos	WOS:000361385100055
summary	The aim of this paper is to investigate the applications both current and potential, of combining Augmented Reality (AR) and Building Information Modelling (BIM), providing an insight into attitudes towards utilising these technologies within the construction industry. This paper presents a study which has evaluated current research on the topic of AR and BIM, conducted semi structured interviews with a panel of industry experts and surveyed a sample group of 43 within the wider UK construction industry . Industry experts were interviewed using semi-structured interviews and results were thematically analysed with the data gathered from the literature review. 5 core themes used to structure a nine item industry and practitioner questionnaire. Results suggest that use of AR and BIM within the construction industry will continue to grow with the advent of emerging technologies. Use of AR and BIM combined with 3D Scanning, Wireless Sensory Network will also increase and the synergies between BIM and these emerging technologies will improve overall efficiencies in design, delivery, maintenance and demolition of projects. The findings of this study contribute further knowledge to understanding the implications and possibilities that utilising AR and BIM will have in the construction industry.
keywords	Augmented reality; emerging technologies; building information modelling; aec industry
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2014_000
id	caadria2014_000
authors	Gu, Ning; Shun Watanabe, Halil Erhan, Matthias Hank Haeusler, Weixin Huang and Ricardo Sosa (eds.)
year	2014
title	Rethinking Comprehensive Design: Speculative Counterculture
source	Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, 994 p.
doi	https://doi.org/10.52842/conf.caadria.2014
summary	Rethinking Comprehensive Design—the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014)—emphasises a cross-disciplinary context to challenge the mainstream culture of computational design in architecture. It aims to (re)explore the potential of computational design methods and technologies in architecture from a holistic perspective. The conference provides an international forum where academics and practitioners share their novel research development and reflection for defining the future of computation in architectural design. Hosted by the Department of Design, Engineering and Management at the Kyoto Institute of Technology, CAADRIA 2014 presents 88 peer-reviewed full papers from all over the world. These high-quality research papers are complimented by 34 short work-in-progress papers submitted for the poster session of the conference. The conference proceedings were produced by a motivated team of volunteers from the CAADRIA community through an extensive collaboration. The 88 full papers rigorously double-blind reviewed by the dedicated International Review Committee (consisting of 74 experts), testify to CAADRIA’s highly respectable international standing. Call for abstracts sent out in July 2013 attracted 298 submissions. They were initially reviewed by the Paper Selection Committee who accepted 198 abstracts for further development. Of these, 118 full papers were eventually submitted in the final stage. Each submitted paper was then assessed by at least two members of the International Review Committee. Following the reviewers’ recommendations, 91 papers were accepted by the conference, of which 88 are included in this volume and for presentation in CAADRIA 2014. Collectively, these 88 papers define Rethinking Comprehensive Design in terms of the following research streams: Shape Studies; User Participation in Design; Human-Computer Interaction; Digital Fabrication and Construction; Computational Design Analysis; New Digital Design Concepts and Strategies; Practice-Based and Interdisciplinary Computational Design Research; Collaborative and Collective Design; Generative, Parametric and Evolutionary Design; Design Cognition and Creativity; Virtual / Augmented Reality and Interactive Environments; Computational Design Research and Education; and Theory, Philosophy and Methodology of Computational Design Research. In the following pages, you will find a wide range of scholarly papers organised under these streams that truly capture the quintessence of the research concepts. This volume will certainly inspire you and facilitate your journey in Rethinking Comprehensive Design.
series	CAADRIA
last changed	2022/06/07 07:49

_id	sigradi2014_181
id	sigradi2014_181
authors	Meneses Bedoya, Edgar Alonso; Benjamín Montoya Jaramillo
year	2014
title	La utopía de la implementación del B.I.M en la industria de la construcción en Colombia [The utopia of the implementation of B.I.M in the construction industry in Colombia]
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 398-402
summary	The aim of the research is analyze from different case studies, how does implemented BIM in the construction industry in Colombia, benefits, difficulties and drawbacks, trying to answer the questions that arise from the experience of this implementation: how does impact the BIM the industry construction, in a context where technological processes and craft activities with very low operational control converge? and How does this implementation affects companies should incorporate innovative models that require profound organizational changes ?.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	acadia23_v1_174
id	acadia23_v1_174
authors	Nejur, Andrei
year	2023
title	NoeudAL Pavilion: Ultralight folded nodes for bespoke geometries
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 174-179.
summary	This research project, conducted at the University of Montreal School of Architecture, presents an innovative approach to the construction of reticulated structures, focusing on the development and application of a novel, ultralight aluminum node. The node, constructed from a folded, laser-cut, 1-mm aluminum sheet, is designed to accommodate wooden linear members with varied rectangular sections, making it adaptable to bespoke geometries and low valence nodes. This innovative design offers a solution to the long-standing challenge in the construction industry of balancing cost, customization, and weight for reticulated structures through novel node designs (Abdelwahab and Tsavdaridis 2019; Dyvik et al. 2023; Chilton 2007; Rochas 2014; Hassani et al. 2020).
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	ecaade2014_239
id	ecaade2014_239
authors	Pedro Filipe Martins and José Pedro Sousa
year	2014
title	Digital Fabrication Technology in Concrete Architecture
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 475-484
doi	https://doi.org/10.52842/conf.ecaade.2014.1.475
wos	WOS:000361384700047
summary	Technological innovation has been an important driving force in architecture, enabling and inspiring architects and engineers by giving them new tools for solving existing problems. In the last two decades, the exploration of digital design and fabrication technologies has stimulated the development of a variety of interests and strategies to materialize increasingly complex and customized solutions in architecture, with traditional building materials. Reinforced concrete is the most widely used material in the building industry today and throughout its history has been the subject of vast research into its performance as a construction material and its tectonic potential in architecture. As such, the introduction of digital fabrication processes in concrete construction represents the biggest prospect for renovation of our built environment and at the same time, presents particular difficulties and opportunities, which are now being addressed. In an effort to investigate the alternative design and material possibilities in concrete emerging from the use of digital fabrication technologies in architecture, this paper proposes a focused view of digital fabrication applied to concrete construction with two areas of research. By framing the research in the context of reference works in concrete architecture of the 20th century, this paper describes and illustrates taxonomy of existing and possible types of integration of digital fabrication technologies in concrete architecture in the realms of Practice and Research.This characterization allows the authors to frame the relation between material, technology and architecture in different environments regarding the same material, extracting a clear image of existing processes, their potential and shortcomings, as well as expectations for future developments.
keywords	Digital fabrication; concrete; cam; robotics; sustainability
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ascaad2014_009
id	ascaad2014_009
authors	Rahmann, Heike and Jillian Walliss
year	2014
title	Interdisciplinary Intersections: New roles for digital technologies and landscape architecture in the design of large scale infrastructures
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 123-135
summary	The introduction of BIM is assumed to introduce higher degrees of collaboration and efficiencies within design and construction practices. The potentials of this collaboration tend to focus on architecture, engineering and construction (AEC). Landscape architecture is rarely discussed within this model, technically nor conceptual. This paper explores the potentials of landscape architecture’s contribution to this new model of digitally driven collaboration. Drawing on interviews with the architects, landscape architects and engineers we explore the role of landscape architecture in the conceptualization, design and construction of the Victorian Desalination Plant, a highly political project located on an ecological sensitive coastal site. This paper highlights the centrality of the landscape digital model in mediating the critical intersection between the design parameters, physical attributes of the site, performative qualities of the design and the disciplines of architecture, landscape and engineering. This model also formed the dominant method for communicating the complex project to stake holders and clients. Significantly, this model was not developed into a BIM model, with content instead integrated into the architectural and engineering models. This research highlights one of the major difficulties in conceptualizing the positioning of landscape architecture within a BIM driven collaborative process. To operate effectively, landscape architecture must engage across the multiple scales and disciplinary intersections. Consequently, landscape architects must understand the digital and spatial languages of architecture and engineering, and conceptualise where their contribution lies within ‘paperless’ design and construction processes. This outcome differs significantly from current debates within landscape architecture which instead focus on the identification of ‘the’ specialist BIM software most appropriate to the discipline, as distinct from understanding BIM as a collaborative process.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ecaade2014_000
id	ecaade2014_000
authors	Thompson, Emine Mine (ed.)
year	2014
title	Fusion, Volume 1
source	Proceedings of the 32nd International Conference on Education and research in Computer Aided Architectural Design in Europe, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, 668 p.
doi	https://doi.org/10.52842/conf.ecaade.2014.2
summary	This is the first volume of the conference proceedings of the 32nd eCAADe conference, held from 10-12 September 2013 at the Department of Architecture and Built Environment, Faculty of Engineering and Environment, Northumbria University in Newcastle upon Tyne, England. Both volumes together contain 130 papers that were submitted and accepted to this conference. The theme of the 32nd eCAADe conference is Fusion- data integration at its best. All quests for data integration in architecture and the construction industry lead ultimately to FUSION, a synthesis of knowledge that transcends mere combination. FUSION is the dream of a knowledge system that will enable multiple sets of data, in manifold formats, to be presented in a unified view. This conference is exploring the possibilities for advanced levels of data integration in the service of the representation and management of the natural environment, and the design, visualisation and making of the built environment. These proceedings are presenting the contributions which explore the elusive goal of FUSION in architecture and related fields. The first volume of the proceedings contains 65 papers grouped under seven sub-themes (Towards Smarter Cities, Design Tool 1, CAAD Education, Fabrication, Shape-Form-Geometry, Visualisation and Digital Heritage).
series	eCAADe
type	normal paper
email
last changed	2022/06/07 07:49

_id	ascaad2014_014
id	ascaad2014_014
authors	Abuelmaatti, Aisha A.; Vian S. Ahmed and Heveine S. Baban
year	2014
title	Collaborative Environments in Small and Medium-sized Enterprises in Architecture, Engineering and Construction
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 183-193
summary	The general picture of Architecture Engineering and Construction (AEC) is of a sector that is a pyramid with control being in the hands of large players with a large base of Small and Medium Enterprises (SMEs). It ensues naturally that SMEs are key players in supporting the large companies. This suggests that, the AEC sector has a continuous demand for collaboration. Collaborative working has been implemented in numerous companies. These efforts have resulted in the wide recognition of the opportunity that emerging technologies offer the AEC sector. It is, however, commonly observed that SMEs are likely to magnify the sector trend and to be less technically forward thinking than large companies. The main focus of this paper is, therefore, to explore the use of IT within AEC, and the barriers and different implementation factors that can influence SMEs to develop, in response to business pressures using the opportunities provided by collaborative technologies.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ascaad2014_004
id	ascaad2014_004
authors	Afsari, Kereshmeh; Matthew E. Swarts and T. Russell Gentry
year	2014
title	Integrated Generative Technique for Interactive Design of Brickworks
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 49-64
summary	Bricks have been used in the construction industry as a building medium for millennia. Distinct patterns of bricks depict the unique aesthetic intentions found in Roman, Gothic and Islamic architecture. In contemporary practice, the use of digital tools in design has enabled methodologies for creating new forms in architecture. CAD and BIM systems provide new opportunities for designers to create parametric objects for building form generation. In masonry design, there exists an inherent contradiction between traditional patterns in brick design, which are formal and prescribed, and the potential for new patterns generated using design scripting. In addition, current tools do not provide interactive techniques for the design of brickwork patterns that can manage constant changes parametrically, to inform and influence design process, by providing design feedback on the constructive and structural aspects of the proposed brick pattern and geometry. This research looks into the parametric techniques that can be applied to create different kinds of patterns on brick walls. It discusses a methodology for an interactive brickwork design within generative techniques. By integrating data between two computational platforms – the first based on image analysis and the second on parametric modeling, we demonstrate a methodology and application that can generate interactive arbitrary patterns and map it to the brick wall in real-time.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ascaad2014_037
id	ascaad2014_037
authors	Al-Tuhafi, Assda A. and Nasma M. Thabit
year	2014
title	The Methodology of Teaching Computer-Aided Architectural Design in the Department of Architecture in Mosul University
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 271; 457-469
summary	Several architectural studies tackled the methodologies of teaching the architectural design subject in general and their relation to the use of computer in particular. The trends varied in accordance with the research that is relevant to the subject due to its importance in generating new architectural models, but it didn’t crystallize a theoretical framework that identifies clear and specific vocabularies related to the methodology of teaching the computer-aided architectural design. The current study discusses the importance of this concept in an attempt to explore the particular problem represented by the non-clarity of this methodology in the department of architecture in Mosul University. Therefore, the problem of the research crystallized and its objective and its methodology were identified and this was represented by constructing a theoretical framework which includes several main items. Then the theoretical framework was applied to selected projects of architectural department students in order to manifest the particularity of teaching the computer-aided architectural design. Results showed the distinction of this department as this methodology led to the derivation of different architectural products in accordance with the particular effects using the computer technologies. The results also manifested the change in the architectural design trend that was caused due to the digital intervention in the way of the student's thinking from one hand and the components and the elements of the building from the other hand that the quality of the design can be improved by using the computer and the quantity will be more in shorter time.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	caadria2014_042
id	caadria2014_042
authors	Alam, Jack and Jeremy J. Ham
year	2014
title	Towards a BIM-Based Energy Rating System
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 285–294
doi	https://doi.org/10.52842/conf.caadria.2014.285
summary	Governments in Australia are faced with policy implementation that mandates higher energy efficient housing (Foran, Lenzen & Dey 2005). To this effect, the National Construction Code (NCC) 2013 stipulates the minimum energy performance for residential buildings as 114MJ/m2 per annum or 6 stars on an energy rating scale. Compliance with this minimum is mandatory but there are several methods through which residential buildings can be rated to comply with the deemed to satisfy provisions outlined in the NCC. FirstRate5 is by far the most commonly used simulation software used in Victoria, Australia. Meanwhile, Building Information Modelling (BIM), using software such as ArchiCAD has gained a foothold in the industry. The energy simulation software within ArchiCAD, EcoDesigner, enables the reporting on the energy performance based on BIM elements that contain thermal information. This research is founded on a comparative study between FirstRate5 and EcoDesigner. Three building types were analysed and compared. The comparison finds significant differences between simulations, being, measured areas, thermal loads and potentially serious shortcomings within FirstRate5, that are discussed along with the future potential of a fully BIM-integrated model for energy rating certification in Victoria.
keywords	Building Information Modelling, energy rating, FirstRate 5, ArchiCAD EcoDesigner, Building Energy Model
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2014_068
id	sigradi2014_068
authors	Almeida da Silva, Adriane Borda; Nirce Saffer Medevedosky, Sirlene de Mello Sopeña, Gustavo Alcantara Brod, Thales Teodoro
year	2014
title	Contrução de cenários motivacionais sob a perspectiva de tecnologias sociais [Construction of motivational scenarios in the perspective of social technologies]
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 493-496
summary	This paper describes the development of actions, denominated motivational scenarios, which sought to motivate behavior change in favor of the requalification of the urban space in a playful manner; the actions were directed to areas of social housing and the appreciation of architectural heritage. The concept of Social Technology and the recognition of advanced technologies of representation and visualization were characterized in this study as theoretical and technological framework respectively. The actions were structured from anamorphosis techniques, augmented reality and natural, tactile and motion-capture interfaces, building interactive virtual scenarios that are provocative in facing the architectural issues outlined
keywords	Motivational scenarios; urban requalification; architectural heritage; natural interfaces and augmented realitys
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2014_109
id	sigradi2014_109
authors	Alves, Gilfranco Medeiros; Anja Pratschke
year	2014
title	O projeto enquanto jogo: colaboração digital livre? [Design as a game: free digital collaboration?]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 53-56
summary	The paper will present one specific aspect of the PhD research called Cibersemiótica e Processos de Projeto: Metodologia em Revisão, funded by FAPESP, which in turn is linked to the Nomads.usp research group of the University of São Paulo. The paper discusses aspects of digital design processes within an approach on social collaboration with digital mediation, from concepts based on Actor Network Theory, developed by the French Philosopher Bruno Latour, Swarm Behaviour, which is observed in nature, as well as the Multi-Agent Systems. The paper aims to examine collaborative procedures and hybrid design methods involving several actors or players, trying to redefine the possibilities of conception in Architecture with a bottom-up approach, considering the concept of game applied to digital design processes.
keywords	Actors Network Theory; Cybersmiotics; games;Multi-Agent System; Swarm Behaviour
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2014_010
id	ecaade2014_010
authors	Anna Laskari
year	2014
title	Multidimensional Comparative Analysis for the Classification of Residual Urban Voids
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 283-292
doi	https://doi.org/10.52842/conf.ecaade.2014.2.283
wos	WOS:000361385100030
summary	Spatial configurations can be perceived through a variety of descriptions of their physical form and structure. Each description can offer an autonomous interpretation or be combined with others parathetically, in a logic of multiple distinct layers. However it is asserted that meaningful information can be extracted from a simultaneous view of sets of descriptions within a high-dimensional structure. This paper investigates the possibility of conducting a comparative analysis and classification of non-typical spatial formations based on the synchronous view of multiple quantifiable spatial attributes. Under the hypothesis of a reciprocal definition of spatial structure and occupation practices, it is intended to identify distinct generic spatial types in order to subsequently determine a range of suitable respective generic use types. This investigation supports the formulation of strategies for the reactivation of unused, residual urban voids, currently being addressed by the research programme titled "Strategies to network urban interventions in the Metropolitan Centre of Athens". The programme is carried out by the School of Architecture of the National Technical University of Athens in collaboration with the Region of Attica, under the scientific coordination of Professor Dr. Parmenidis (2013).
keywords	Multidimensional descriptions; generic spatial types; quantifiable attributes; dimensionality reduction; classification
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2014_240
id	ecaade2014_240
authors	Annie Guerriero and Guillaume Gronier
year	2014
title	Trust within AEC virtual teams - Analysis of different-place collaboration in architectural design
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 2, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 227-236
doi	https://doi.org/10.52842/conf.ecaade.2014.2.227
wos	WOS:000361385100024
summary	The virtual teams are largely encouraged by the recent technological devices supporting different-place collaboration and suggest today new forms of organization. This one is geographically dispersed and regroups all the competencies required for the work to be done. In such a context, trust is essential to guarantee the performance of team. It is indeed a necessary component for initiating the work relationship and to overcome the inherent risk. The capacity of the groups to communicate about the objectives and strategies as well as to readjust them according to the context (i.e. reflexivity) is another element important for the group's performance. This article suggests analyzing these notions of trust and reflexivity within virtual teams in the context of an academic experiment where students are geographically dispersed and have to produce an architectural project.
keywords	Trust; virtual team; different-place collaboration; social reflexivity; task reflexivity; aec (architecture; engineering and construction)
series	eCAADe
email
last changed	2022/06/07 07:54

_id	lasg_nearlivingarchitecture_2014_045
id	lasg_nearlivingarchitecture_2014_045
authors	Armstrong, Rachel
year	2014
title	Potent Matter; The Dynamic Chemistries of Hylozoic Ground
source	Near-Living Architecture; Work in Progress from The Hylozoic Ground Collaboration 2011 - 2013 [ISBN 978-1-926724-45-4 (pbk).--ISBN 978-1-926724-57-7 (epub).--ISBN 978-1-926724-58-4 (mobi)] Riverside Architectural Press: Toronto, Canada 2014 pp. 045 - 062
keywords	Living Architecture Systems Group, living architecture, meshworks, metabolisms, kinetic, cybernetic, artificial intelligence, cognition, neuroscience, prototyping, diffusive, subtle phenomena, form-languge, chemistry, natural computing, affect, perception
email
last changed	2019/07/29 14:00

_id	sigradi2014_057
id	sigradi2014_057
authors	Barros, Diana Rodriguez; María Mandagarán
year	2014
title	Pensamiento de diseño y construcción de narrativas visuales. Caso de prácticas didácticas disruptivas en entornos postdigitales [Design thinking and construction of visual narratives. Case teaching practices in disruptive postdigitals environments]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 195-199
summary	Design Thinking recognizes processes linked to empathy, creation, prototyping and storytelling, that condition design methodologies to solve complex problems with user participation. From this perspective, next to disruptive practices, we present learning experiences focus in management, design and production of graphic databases in Web 2.0 and 3.0 contexts. They are linked to photomontages and graphic communication pieces of urban-architectural works and narratives that give meaning and entity to those interventions. We recorded results that value spatial thinking with images. Also the presence of traditional skills with hybrid skills in students, that encourage fluency, creativity and innovation, self-learning, experimentation, teamwork and network integration.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2014_342
id	sigradi2014_342
authors	Bermudez, Jane Jacqueline Espina
year	2014
title	Hábitat lagunar, territorio de la complejidad: creación ancestral, diseño y construcción, una aproximación desde la cultura y cosmogonía añú [Lagoon habitat, territory of complexity ancestral creation, design and construction, an approach from the culture and cosmology añú]
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 540-543
summary	The añú community lives in Laguna Sinamaica territory of complexity building their habitat in wooden stilts houses, based on culture and añú cosmogony. A rural-urban intervention is done without understanding the conceptualization and development. This paper presents a methodology for analyzing the lagoon habitat, premises in the creative process, design and construction for future interventions, and a reflection on the use of criteria for urban and architectural design in modern water villages. This work is part of research “Peoples Water in Lake of Maracaibo Basin: History and Habitat”.
keywords	lagoon habitat; añú culture; complex view; transversal look; territory of complexity
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: