Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 668

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2014_056
id	caadria2014_056
authors	Abdelhameed, Wael A.
year	2014
title	Creativity and VR Use
doi	https://doi.org/10.52842/conf.caadria.2014.719
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 719–728
summary	Creativity with its various processes is involved in all design actions. Creativity used in architectural design is different than creativity in other domains. However, creativity in general with its related cognition processes has no general theory. This research proposes certain activities of initial architectural design phases in which the role of activity is important. The research proceeds to present a case study of two architectural design studios in which a VR environment is employed in order to investigate the effect of VR use on the creativity in those initial design phases. The research applies a methodology of qualitative and quantitative analysis. Various architectural design factors are neutralized to overcome the influence generated from human factors variation and design thinking prejudice on architectural designing and the associated creativities.
keywords	Virtual Reality; Creativity; Architectural Design; Design Studio
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2014_014
id	ascaad2014_014
authors	Abuelmaatti, Aisha A.; Vian S. Ahmed and Heveine S. Baban
year	2014
title	Collaborative Environments in Small and Medium-sized Enterprises in Architecture, Engineering and Construction
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 183-193
summary	The general picture of Architecture Engineering and Construction (AEC) is of a sector that is a pyramid with control being in the hands of large players with a large base of Small and Medium Enterprises (SMEs). It ensues naturally that SMEs are key players in supporting the large companies. This suggests that, the AEC sector has a continuous demand for collaboration. Collaborative working has been implemented in numerous companies. These efforts have resulted in the wide recognition of the opportunity that emerging technologies offer the AEC sector. It is, however, commonly observed that SMEs are likely to magnify the sector trend and to be less technically forward thinking than large companies. The main focus of this paper is, therefore, to explore the use of IT within AEC, and the barriers and different implementation factors that can influence SMEs to develop, in response to business pressures using the opportunities provided by collaborative technologies.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ascaad2014_004
id	ascaad2014_004
authors	Afsari, Kereshmeh; Matthew E. Swarts and T. Russell Gentry
year	2014
title	Integrated Generative Technique for Interactive Design of Brickworks
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 49-64
summary	Bricks have been used in the construction industry as a building medium for millennia. Distinct patterns of bricks depict the unique aesthetic intentions found in Roman, Gothic and Islamic architecture. In contemporary practice, the use of digital tools in design has enabled methodologies for creating new forms in architecture. CAD and BIM systems provide new opportunities for designers to create parametric objects for building form generation. In masonry design, there exists an inherent contradiction between traditional patterns in brick design, which are formal and prescribed, and the potential for new patterns generated using design scripting. In addition, current tools do not provide interactive techniques for the design of brickwork patterns that can manage constant changes parametrically, to inform and influence design process, by providing design feedback on the constructive and structural aspects of the proposed brick pattern and geometry. This research looks into the parametric techniques that can be applied to create different kinds of patterns on brick walls. It discusses a methodology for an interactive brickwork design within generative techniques. By integrating data between two computational platforms – the first based on image analysis and the second on parametric modeling, we demonstrate a methodology and application that can generate interactive arbitrary patterns and map it to the brick wall in real-time.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ascaad2014_023
id	ascaad2014_023
authors	Al-Maiyah, Sura and Hisham Elkadi
year	2014
title	Assessing the Use of Advanced Daylight Simulation Modelling Tools in Enhancing the Student Learning Experience
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 303-313
summary	In architecture schools, where the ‘studio culture’ lies at the heart of students’ learning, taught courses, particularly technology ones, are often seen as secondary or supplementary units. Successful delivery of such courses, where students can act effectively, be motivated and engaged, is a rather demanding task requiring careful planning and the use of various teaching styles. A recent challenge that faces architecture education today, and subsequently influences the way technology courses are being designed, is the growing trend in practice towards environmentally responsive design and the need for graduates with new skills in sustainable construction and urban ecology (HEFCE’s consultation document, 2005). This article presents the role of innovative simulation modelling tools in the enhancement of the student learning experience and professional development. Reference is made to a teaching practice that has recently been applied at Portsmouth School of Architecture in the United Kingdom and piloted at Deakin University in Australia. The work focuses on the structure and delivery of one of the two main technology units in the second year architecture programme that underwent two main phases of revision during the academic years 2009/10 and 2010/11. The article examines the inclusion of advanced daylight simulation modelling tools in the unit programme, and measures the effectiveness of enhancing its delivery as a key component of the curriculum on the student learning experience. A main objective of the work was to explain whether or not the introduction of a simulation modelling component, and the later improvement of its integration with the course programme and assessment, has contributed to a better learning experience and level of engagement. Student feedback and the grade distribution pattern over the last three academic years were collected and analyzed. The analysis of student feedback on the revised modelling component showed a positive influence on the learning experience and level of satisfaction and engagement. An improvement in student performance was also recorded over the last two academic years and following the implementation of new assessment design.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ascaad2014_033
id	ascaad2014_033
authors	Al-Mousa , Sukainah Adnan
year	2014
title	Temporary Architecture: An urban mirage
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 405-413
summary	One of the emerging multidisciplinary contemporary art practices is interactive installation art, which is concerned with constructing a temporary artistic environment that is digital, responsive and engaging. It is usually displayed within existing architectural context whether indoor in a gallery space or outdoor in a public space. Recent examples of such art projects show that interactivity and illusion are effectively present and highly influential in the perception and memory of the place. A digital display on a building façade can remain attached to the history of the site in the spectator’s memory even after the display is removed. An interactive space that involves body response and emotional sensory interaction can determine the narrative perceived from the experience. These trends seemingly bring together the physical context and the digital space to contain the spectator. The two mediums are merged to provide a new genre of space, hence a new mode of perception where the art space mediates people’s movement and overlay the context with new meanings. Multiple backgrounds are involved in the creative process of interactive installation art, all of which involve examining various concepts through artistic engagement with temporary spaces. Here, particularly because of interactivity and immerseveness, the spectator becomes part of the performance (the subject); with his moving and reacting he activates the narrative and probably gives it its shape. This paper aims to explore the potentials of the digital spatial display to enhance or weaken our sense of belonging to the surrounding environments while creating an illusionary space within the real physical one. It also aims to discuss how this influence would affect the memory of the mixed experience; the installation being digital, temporary and illusive and the space being physical, permanent and real. What happens to the “spectator” when contained by the digital-interactive and the physical medium(s)?. In order to unfold the mentioned questions, the study uses theories of perception and performance reflected on live case studies of recent art projects where the researcher becomes a member of the audience and an observer at the same time in order to trace the journey inside this new medium. In an era where time is being more difficult to grasp and identities of visual culture is becoming more difficult to define, temporary responsive environments can provide some openings where space becomes durational, yet, influential, and where people’s movements become more meaningful in the visual terrain.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	caadria2014_279
id	caadria2014_279
authors	Austern, Guy; Soungmin Yu, Mara Moral and Theerapat Jirathiyut
year	2014
title	The Urban Genome
doi	https://doi.org/10.52842/conf.caadria.2014.263
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 263–272
summary	The influence of urban morphology on the energy consumption of a fabric has been recently established by research into the energy use of existing cities. This paper suggests a framework for generating environmentally adapted urban tissue by using genetic algorithms as form-finding processes. A series of multi-objective optimization algorithms are described. The geometric abstractions used as a basis for these algorithms are illustrated in detail, and the results and implications of these types of simulations are discussed. The methodology developed within this paper was tested on one km2 site in three cities of varying climates, and further expanded into a detailed case study within one city.
keywords	Urban simulation; Environmental design; Optimization; Genetic Algorithms; Urban Morphology
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2014_170
id	caadria2014_170
authors	Beirão, José Nuno; André Chaszar and Ljiljana _avi_
year	2014
title	Convex- and Solid-Void Models for Analysis and Classification of Public Spaces
doi	https://doi.org/10.52842/conf.caadria.2014.253
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 253–262
summary	In this paper a semiautomated morphological classification of urban space is addressed systematically by sorting through the volumetric shapes of public spaces represented as 3-dimensional convex and solid voids. The motivation of this approach comes from a frequent criticism of space syntax methods for lacking information on how buildings and terrain morphology influence the perception and use of public spaces in general and streets in particular. To solve this problem information on how façades relate with streets and especially information about the facades’ height should be considered essential to produce a richer and more accurate morphological analysis of street canyons and other open spaces. Parametric modelling of convex voids broadens the hitherto known concept of two-dimensional convex spaces considering surrounding facades’ height and topography as important inputs for volumetric representation of urban space. The method explores the analytic potentials of ‘convex voids’ and ‘solid voids’ in describing characteristics of open public spaces such as containment, openness, enclosure, and perceived enclosure, and using these metrics to analyse and classify urban open spaces.
keywords	Open public space; convex voids; solid voids; user-guided feature recognition
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2014_002
id	ascaad2014_002
authors	Burry, Mark
year	2014
title	BIM and the Building Site: Assimilating digital fabrication within craft traditions
source	Digital Crafting [7th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2014 / ISBN 978-603-90142-5-6], Jeddah (Kingdom of Saudi Arabia), 31 March - 3 April 2014, pp. 27-36
summary	This paper outlines a particular component of very well known project: Antoni Gaudí’s Sagrada Família Basilica in Barcelona (1882– on-going but scheduled for completion in 2026). At the time of writing the realisation of the project has proceeded for 87 years since Gaudí's death (1852-1926). As a building site it has been a living laboratory for the nexus between traditional construction offsite manufacturing and digital fabrication since the computers were first introduced to the project:CAD in 1989 closely followed by CAAD two years later. More remarkably CAD/CAM commenced its significant influence in 1991 with the take-up of sem robotised stone cutting and carving. The subject of this paper is an elevated auditorium space that is one of the relatively few ‘sketchy’ areas that Gaudí bequeathed the successors for the design of his magnum opus.
series	ASCAAD
email
last changed	2016/02/15 13:09

_id	ecaade2014_065
id	ecaade2014_065
authors	Daniel Prohasky, Rafael Moya Castro, Simon Watkins, Jane Burry and Mark Burry
year	2014
title	Wind sensing with real-time visualisations for Designers - An approach to understanding wind phenomena for pedestrian comfort using low cost wind sensors
doi	https://doi.org/10.52842/conf.ecaade.2014.1.165
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 165-171
summary	The evaluation of a low-tech wind sensing platform for urban aerodynamic simulations relevant to pedestrian comfort. In this paper, the wind canyon effect is simulated with two different building morphologies. The platform provides conceptual knowledge of the dynamics in wind relevant for designers, architectural practitioners and students of design. Low-cost hot wire anemometry is utilised for the design of an Experimental Fluid Dynamic (EFD) wind sensing network interface. This paper explores the validity of the sensing platform for a new approach for non-wind engineers to gain a better understanding of the dynamics of wind. The influence of real-time feedback from quantified wind on the understanding of wind phenomena for non-wind engineers is discussed and compared with post analysis data. It was found that real-time quantified feedback from wind intrigues and stimulates the intuitive notion of wind dynamics through discussion, however post analysis remains critical to evaluate building design performance.
wos	WOS:000361384700016
keywords	Wind sensing; real-time feedback; experimental fluid dynamics; hot-wire anemometry; atmospheric boundary layer
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2014_233
id	ecaade2014_233
authors	Evangelos Pantazis and David Gerber
year	2014
title	Material Swarm Articulations - New View Reciprocal Frame Canopy
doi	https://doi.org/10.52842/conf.ecaade.2014.1.463
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 463-473
summary	Material Swarm Articulations, is an experiment in developing a multi-objective optimization system that incorporates bottom up approaches for informing architectural design. The paper presents an initial built project that demonstrates the combination of a structural form finding method, with an agent based design system through the digital fabrication processes. The objective of this research is to develop a workflow combined with material and construction constraints that has the potential to increase performance objectives while enabling geometric complexity and design driven articulation of a traditional tectonic system. The emphasis of the research at this stage is to take advantage of material properties and assembly methods applied to a digital design and simulation workflow that enables emergent patterns to influence the performance of the space.The paper illustrates the research through a prototype of a self standing canopy structure in 1:1 scale. It presents results of the form finding, generative patterning, digital fabrication affordances and sets and agenda for next steps in the use of multi-agent systems for design purposes.
wos	WOS:000361384700046
keywords	Computational design; agent-based system; digital fabrication; parametric design; reciprocal frames; form finding; multi-objective optimization, multi-agent systems for design
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2014_232
id	sigradi2014_232
authors	Ledo, Rafael Zanelato; Alice Cybis Pereira
year	2014
title	Objetos de Aprendizagem voltados ao ensino de modelagem digital 3D para arquitetura baseado no estilo cognitivo visual [Learning Objects directed to teaching digital 3D modeling for architecture based on visual cognitive style]
source	SIGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 86-90
summary	This article describes an initiative to identify which cognitive abilities influence performance in 3D modeling for architecture activities. This work tests the visual, spatial and logical reasoning skills of students of architecture. After these tests, the results will compared with the results of 3D modeling test. By identifying, some cognitive abilities that has a direct relation to performance in 3D modeling will be possible to create learning objects that improve these characteristics.
keywords	3D Modeling; Cognitive Syles; Visuospatial Thinking; Performance; Architecture
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	caadria2014_071
id	caadria2014_071
authors	Li, Lezhi; Renyuan Hu, Meng Yao, Guangwei Huang and Ziyu Tong
year	2014
title	Sculpting the Space: A Circulation Based Approach to Generative Design in a Multi-Agent System
doi	https://doi.org/10.52842/conf.caadria.2014.565
source	Rethinking Comprehensive Design: Speculative Counterculture, Proceedings of the 19th International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2014) / Kyoto 14-16 May 2014, pp. 565–574
summary	This paper discusses an MAS (multiagent system) based approach to generating architectural spaces that afford better modes of human movement. To achieve this, a pedestrian simulation is carried out to record the data with regard to human spatial experience during the walking process. Unlike common practices of performance oriented generation where final results are achieved through cycles of simulation and comparison, what we propose here is to let human’s movement exert direct influence on space. We made this possible by asking "humans" to project simulation data on architectural surroundings, and thus cause the layout to change for the purpose of affording what we designate as good spatial experiences. A generation experiment of an exhibition space is implemented to explore this approach, in which tentative rules of such spatial manipulation are proposed and tested through space syntax analyse. As the results suggested, by looking at spatial layouts through a lens of human behaviour, this projection-and-generation method provides some insight into space qualities that other methods could not have offered.
keywords	Performance oriented generative design; projection; multi-agent system; pedestrian simulation; space syntax
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	sigradi2014_305
id	sigradi2014_305
authors	Machado, Lara Maria de Araújo; André Ximenes , Matheus Henrique do Vale Alencar
year	2014
title	A abordagem sistêmica do processo generativo da forma aplicada ao projeto em Design [The systemic approach of the generative process of the form applied to the project in Design]
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 413-417
summary	The study addresses Shape Grammar as analytic and generative project methodology in Design. In order to authenticate the influence of these generation laws in design practice, the works of some artists of the Bauhaus school were analyzed. Furthermore, the study shows the importance of the designer in the conception process of his project, from the use of the identified grammar as generative tool for new products.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ecaade2014_186
id	ecaade2014_186
authors	Maria Kerkidou, Anastasia Pechlivanidou-Liakata, Adam Doulgerakis and Alexandros Sagias
year	2014
title	Agents' movement_towards the reformation of public space - Step 1: select \| implement \| observe crowd rules
doi	https://doi.org/10.52842/conf.ecaade.2014.1.053
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 53-62
summary	In order to enable designers to envision the behaviour of pedestrians with reference to specific environments, computational models of crowds and their movement become indispensable tools of evaluation as well as tools of creativity. In this paper, the model under development constitutes a generic model which incorporates ideas about agent-based systems. The simulation program comprises a support system for the designer to place virtual users in a context that bears analogous environmental traits of the area under study. The design problem which is addressed by the implementation deals with public squares for which the programmatic demands involve a broad spectrum of users of diverse idiosyncrasies. Our study attempts to elucidate how the variation in preferences of pedestrian movement which depend on various personal, situational and environmental factors, may influence the current use of a selected public space and underpin qualitative alterations compared to its initial design. The intent of the methodology is not to create a predictive tool of naturalistic human movement but to explore how spatial configuration can be assessed and developed through a simulation model of pedestrian behaviour.
wos	WOS:000361384700004
keywords	Crowd simulation; spatial behaviour; pedestrian movement; public space
series	eCAADe
email
last changed	2022/06/07 07:59

_id	sigradi2014_197
id	sigradi2014_197
authors	Pereira, Gilberto Corso
year	2014
title	Representações da Cidade Contemporânea [Representations of the Contemporary City]
source	SiGraDi 2014 [Proceedings of the 18th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-9974-99-655-7] Uruguay - Montevideo 12 - 14 November 2014, pp. 516-519
summary	Representation is a key concept for understanding the social uses of technologies associated with manipulation, presentation, storage and maintenance of geographic information.This paper refers to forms of space representation, essentially derived from cartographic techniques, that bases many web applications which aid to promote the development of new forms of social interaction and influence the perception and use of public spaces. The paper discusses the relationship between spatial representation, spatial knowledge and technologies of representation and visualization of space.
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	cdrf2023_273
id	cdrf2023_273
authors	Pixin Gong, Xiaoran Huang, Chenyu Huang, Shiliang Wang
year	2023
title	Modeling on Outdoor Thermal Comfort in Traditional Residential Neighborhoods in Beijing Based on GAN
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_23
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
summary	With the support of new urban science and technology, the bottom-up and human-centered space quality research has become the key to delicacy urban governance, of which the Universal Thermal Climate Index (UTCI) have a severe influence. However, in the studies of actual UTCI, datasets are mostly obtained from on-site measurement data or simulation data, which is costly and ineffective. So, how to efficiently and rapidly conduct a large-scale and fine-grained outdoor environmental comfort evaluation based on the outdoor environment is the problem to be solved in this study. Compared to the conventional qualitative analysis methods, the rapidly developing algorithm-supported data acquisition and machine learning modelling are more efficient and accurate. Goodfellow proposed Generative Adversarial Nets (GANs) in 2014, which can successfully be applied to image generation with insufficient training data. In this paper, we propose an approach based on a generative adversarial network (GAN) to predict UTCI in traditional blocks. 36000 data samples were obtained from the simulations, to train a pix2pix model based on the TensorFlow framework. After more than 300 thousand iterations, the model gradually converges, where the loss of the function gradually decreases with the increase of the number of iterations. Overall, the model has been able to understand the overall semantic information behind the UTCI graphs to a high degree. Study in this paper deeply integrates the method of data augmentation based on GAN and machine learning modeling, which can be integrated into the workflow of detailed urban design and sustainable construction in the future.
series	cdrf
email
last changed	2024/05/29 14:04

_id	ecaade2016_225
id	ecaade2016_225
authors	Thompson, Emine Mine
year	2016
title	Smart City: Adding to the Complexity of Cities - A Critical Reflection
doi	https://doi.org/10.52842/conf.ecaade.2016.1.651
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 651-660
summary	This paper seeks to further the state-of-the-art knowledge on what a smart city is; by analysing the smart cities across the world. It also seeks to find out how different approaches to the smart city creation influence the city. This worked based on the ongoing review on Smart Cities that was started in 2014. In particular, it is structured as follows. First, definition of "smart city" are reviewed, next typologies of smart cities were generated by analysing the different types of smart cities across the world. Following this, case studies are reported. Case studies are followed by a reflection. Paper drawn to conclusion following this section by giving research directions to take this research further.
wos	WOS:000402063700070
keywords	smart cities; future cities; urban planning; city transformations; number of smart cities
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2014_021
id	ecaade2014_021
authors	Aant van der Zee, Bauke de Vries and Theo Salet
year	2014
title	From rapid prototyping to automated manufacturing
doi	https://doi.org/10.52842/conf.ecaade.2014.1.455
source	Thompson, Emine Mine (ed.), Fusion - Proceedings of the 32nd eCAADe Conference - Volume 1, Department of Architecture and Built Environment, Faculty of Engineering and Environment, Newcastle upon Tyne, England, UK, 10-12 September 2014, pp. 455-461
summary	In this paper we present an outline of a newly started project to develop a tool which connects BIM to a manufacturing technique like 3D printing. First we will look some promising manufacturing techniques. We will design a small dwelling and export it into a BIM, from which we will extract our data to generate the path the nozzle has to follow. The chosen path is constrained by the material properties, the design and speed of the nozzle. To validate the system we develop a small VR tool in which we mimic a manufacturing tool.
wos	WOS:000361384700045
keywords	Rapid prototyping; rapid manufacturing; robotics; automation; building information model (bim)
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ijac201412407
id	ijac201412407
authors	Abdelmohsen, Sherif M.
year	2014
title	An Inquiry into Designing in Context using Generative Systems
source	International Journal of Architectural Computing vol. 12 - no. 4, 477-494
summary	The use of generative systems has been widely investigated in the architectural design process through different procedures and levels of autonomy to generate form.The digression from abstract pre- existing notions of vocabulary and rules – even when resulting in emergent forms – to address complex real- world contexts is yet a challenging undertaking.This paper explores incorporating context in the process of designing using generative systems from ideation to fabrication, and explores the relationship between the emergent nature of generative design and the situated act of designing while using generative design tools.A course offered for 3rd year architecture students at the Department of Architecture, Ain Shams University, Egypt, was designed for this purpose. 110 students employed systems including shape grammars, L- systems, fractals and cellular automata, to design and fabricate 8 group projects.A discussion around emergence and situatedness is presented, with special attention to the designing process from ideation to fabrication.
series	journal
last changed	2019/05/24 09:55

_id	ecaade2016_048
id	ecaade2016_048
authors	Abramovic, Vasilija and Achten, Henri
year	2016
title	From Moving Cube to Urban Interactive Structures - A case study
doi	https://doi.org/10.52842/conf.ecaade.2016.1.661
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 661-668
summary	When thinking about the future vision of a city, having in mind recent development in digital technologies and digital design tools we are inclined to expect new building structures which incorporate this technology to better help us manage the complexity of life, and to simplify our daily lives and tasks. The idea behind this research paper lies in design of such structures, which could be put inside an urban context and engage in creating a built environment that can add more to the quality of life. For us Interactive architecture is architecture that is responsive, flexible, changing, always moving and adapting to the needs of today. The world is becoming more dynamic, society is constantly changing and the new needs it develops need to be accommodated. As a result architecture has to follow. Spaces have to become more adaptive, responsive and nature concerned, while having the ability for metamorphosis, flexibility and interactivity. Taken as a starting point of this idea is a specific module from graduation project in 2014 "The Unexpected city", where it was possible to test out first ideas about interactive and flexible objects in an urban environment.
wos	WOS:000402063700071
keywords	Flexible architecture; Interactive architecture; Responsive systems
series	eCAADe
email
last changed	2022/06/07 07:54

For more results click below: