Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 227

Reformat results as: short short into frame detailed detailed into frame

_id	cf2015_463
id	cf2015_463
authors	Leblanc, François
year	2015
title	Super-details: Integrated patterns from 3D printing processes to performance-based design
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 463.
summary	Performance-based architecture has predominately been influenced by computational advances in simulating complex organizations. The advent of 3D printing, however, has introduced a new approach to generate complex forms, which is redirecting focus from shape-centric design to material design, namely, innovative structures and properties generated by the process itself. This article investigated the multiscale approach potential to design using extrusion-based 3D printing techniques that offer novel geometric organizations that conform to desired performance. It was found that 3D printed toolpaths adapted to extrusion-based systems render an anisotropic behavior to the architectural object that is best optimized by designing tessellated surfaces as the primary structural shape from which small-scale periodic surfaces can be embedded within a larger geometric system.
keywords	3D printing, multiscale design, extrusion-based systems, porous material, topology, CAD integration.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	caadria2016_415
id	caadria2016_415
authors	Crolla, Kristof and Adam Fingrut
year	2016
title	Protocol of Error: The design and construction of a bending-active gridshell from natural bamboo
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 415-424
doi	https://doi.org/10.52842/conf.caadria.2016.415
summary	This paper advocates alternative methods to overcome the impossibility of realising ‘perfect’ digital designs. It discusses Hong Kong’s 2015 ‘ZCB Bamboo Pavilion’ as a methodological case study for the design and construction of architecture from unprocessed natu- ral bamboo. The paper critically evaluates protocols set up to deal with errors resulting from precise digital design systems merging with inconsistent natural resources and onsite craftsmanship. The paper starts with the geometric and tectonic description of the project, illus- trating a complex and restrictive construction context. Bamboo’s unique growth pattern, structural build-up and suitability as a bending- active material are discussed and Cantonese bamboo scaffolding craftsmanship is addressed as a starting point for the project. The pa- per covers protocols, construction drawings and assembly methods developed to allow for the incorporation and of large building toler- ances and dimensional variation of bamboo. The final as-built 3d scanned structure is compared with the original digital model. The pa- per concludes by discussing the necessity of computational architec- tural design to proactively operate within a field of real-world inde- terminacy, to focus on the development of protocols that deal with imperfections, and to redirect design from the virtual world towards the latent opportunities of the physical.
keywords	Bamboo; bending-active gridshells; physics simulation; form-finding; indeterminacy
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2015_247
id	ecaade2015_247
authors	Garcia, Manuel Jimenez and Retsin, Gilles
year	2015
title	Design Methods for Large Scale Printing
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 331-339
doi	https://doi.org/10.52842/conf.ecaade.2015.2.331
wos	WOS:000372316000039
summary	With an exponential increase in the possibilities of computation and computer-controlled fabrication, high density information is becoming a reality in digital design and architecture. However, construction methods and industrial fabrication processes have not yet been reshaped to accommodate the recent changes in those disciplines. Although it is possible to build up complex simulations with millions of particles, the simulation is often disconnected from the actual fabrication process. Our research proposes a bridge between both stages, where one drives the other, producing a smooth transition from design to production. A particle in the digital domain becomes a drop of material in the construction method.The architect's medium of expression has become much more than a representational tool in the last century, and more recently it has evolved even beyond a series of rules to drive from design to production. The design system is the instruction itself; embedding structure, material and tectonics and gets delivered to the very end of the construction chain, where it gets materialised. The research showcased in this paper investigates tectonic systems associated with large scale 3D printing and additive manufacturing methods, inheriting both material properties and fabrication constraints at all stages from design to production. Computational models and custom design software packages are designed and developed as strategies to organise material in space in response to specific structural and logistical input.Although the research has developed a wide spectrum of 3D printing methods, this paper focuses only on two of the most recent projects, where different material and computational logics were investigated. The first, titled Filamentrics, intends to develop free-form space frames, overcoming their homogeneity by introducing robotic plastic extrusion. Through the use of custom made extruders a vast range of high resolution prototypes were developed, evolving the design process towards the fabrication of precise structures that can be materialised using additive manufacturing but without the use of a layered 3D printing method. Instead, material limitations were studied and embedded in custom algorithms that allow depositing material in the air for internal connectivity. The final result is a 3x2x2.5m structure that demonstrates the viability of this construction method for being implemented in more industrial scenarios.While Filamentrics is reshaping the way we could design and build light weight structures, the second project Microstrata aims to establish new construction methods for compression based materials. A layering 3D printing method combines both the deposition of the binder and the distribution of an interconnected network of capillaries. These capillaries are organised following structural principles, configuring a series of channels which are left empty within the mass. In a second stage aluminium is cast in this hollow space to build a continuous tension reinforcement.
series	eCAADe
type	normal paper
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=07a6d8e0-6fe7-11e5-9994-cb14cd908012
last changed	2022/06/07 07:51

_id	sigradi2015_10.250
id	sigradi2015_10.250
authors	Linardi, Ana Beatriz; Ramos, Fernando da Silva; Garotti, Flavio Valverde; Damiani, Vitor
year	2015
title	3D printing as support for arts education for the visually impaired
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 564-568.
summary	This article discusses some methodologies in art education in schools and educational activities in museums. It focuses on accessibility and in the visually impaired rights to access and improve the experiences and repertoire in artistic languages, recognizing the use of new technologies in the field of digital manufacturing as valuable resources for the production of teaching materials with the use of cheaper and accessible technology, which expands the access to cultural institutions and education. Considering that most of the museums art works are not to be touched, 3D printing reproductions in durable low cost plastic present as an alternative for tactile experience. In addition, the photogrammetric 3D scanning process and digital editing allow for the creation of isolated parts and materials originated from the art piece, broadening the pedagogical possibilities of art educators. The production of didactic material for arts teaching, with the use of 3D printed copies (edited or not) originated from 3D scans, may help revealing a more subtle and sophisticated aspect of artistic narrative to the public and the visually impaired.
keywords	Education, Art, 3D Scan, 3D Printing
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ecaade2015_109
id	ecaade2015_109
authors	Markusiewicz, Jacek, Strzala, Marcin and Koszewski, Krzysztof
year	2015
title	Modular Light Cloud. Design, Programming and Making - Towards the Integration of Creative Actions
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 91-101
doi	https://doi.org/10.52842/conf.ecaade.2015.2.091
wos	WOS:000372316000012
summary	Modular Light Cloud is an installation that is conceived to explore the boundaries of architecture and art. Its interactivity is a metaphor of mutual influences that derive from activities performed in space - associated with motion, sound and light.It is an experimental project focused on the integration of architectural elements, structure, information technology, performing arts, electronics and digital fabrication in architectural education.The project was completed in a two-week student workshop in collaboration with a contemporary dance artist. The students were taught the basics of parametric design, programming of electronic components and digital fabrication during tutorial classes. The making process combined three stages of development: design, construction and programming of interaction.The final form consists of two irregular spatial trusses made of aluminum profiles connected with 3d printed nodes. The profiles are equipped with LED strips and electronic components: light sensors, sound and communication between them. These systems control the intensity of light emitted by the diodes based on the inputs.The result is a working prototype presented as interactive installation featuring contemporary dance artist. It was displayed at art festivals and other events.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=e17b2300-6f83-11e5-836f-4becdc2939a0
last changed	2022/06/07 07:59

_id	ecaade2015_129
id	ecaade2015_129
authors	Mostafavi, Sina; Bier, Henriette, Bodea, Serban and Anton, AnaMaria
year	2015
title	Informed Design to Robotic Production Systems - Developing Robotic 3D Printing System for Informed Material Deposition
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 287-296
doi	https://doi.org/10.52842/conf.ecaade.2015.2.287
wos	WOS:000372316000034
summary	This paper discusses the development of an informed Design-to-Robotic-Production (D2RP) system for additive manufacturing to achieve performative porosity in architecture at various scales. An extended series of experiments on materiality, fabrication and robotics were designed and carried out resulting in the production of a one-to-one scale prototype. In this context, design materiality has been approached from both digital and physical perspectives. At digital materiality level, a customized computational design framework is implemented for form finding of compression only structures combined with a material distribution optimization method. Moreover, the chained connection between parametric design model and robotic production setup has led to a systematic study of certain aspects of physicality that cannot be fully simulated in the digital medium, which then establish a feedback loop for underrating material behaviors and properties. As a result, the D2RP system proposes an alternative method of robotic material deposition to create an informed material architecture.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=9b8d34a6-6fe6-11e5-be92-57ca3f902ce9
last changed	2022/06/07 07:58

_id	ecaade2015_301
id	ecaade2015_301
authors	Wit, Andrew John
year	2015
title	The One Day House - Intelligent Systems for Adaptive Buildings
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 643-650
doi	https://doi.org/10.52842/conf.ecaade.2015.2.643
wos	WOS:000372316000071
summary	As the global population continues to climb and environmental conditions become further unpredictable, the creation of a more robust, intelligent, adaptable yet affordable housing system will become an evermore-significant issue. Existing housing typologies find themselves lagging behind other industries such as aerospace and even automotive, lacking advanced fabrication infrastructures as well as embedded intelligent technologies that could allow for: Global interconnectivity and or manipulation, automatic software/hardware updating and physical/computational adaptability. The use of advanced tools for manufacturing resembling industrial robotics, 3D printing and as well as intelligent fabrication systems currently remains nearly non-existent. Constructed using outdated design methodologies, materials and construction techniques, the current dwelling functions merely as an enclosure for life rather then an integrated system for information, comfort and commerce. This paper questions the current typology of “house” through the rethinking of not only form and material, but by reimagining the dwelling as a whole. Rather then observing the dwelling as a static form for infrastructural permanence, this paper redefines the home as a globalized commodity, which is both physically and technologically connected and adaptable.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=7412002e-6e91-11e5-b62c-00190f04dc4c
last changed	2022/06/07 07:57

_id	acadia15_47
id	acadia15_47
authors	Chaaraoui, Rizkallah; Askarinejad, Ali
year	2015
title	Anisoptera; Anisopteran Deformation and the Latent Geometric Patterns of Wood Envelopes
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 47-56
doi	https://doi.org/10.52842/conf.acadia.2015.047
summary	Advancements in technologies provide Architects, today, with the means to expose new expressive forms using traditional materials. It is therefore possible to design dynamic actuating systems, where several different expressions, or differentiations inherent in the same material, are able to modify its topology and enhance its properties. Wood, traditionally used in construction, is given static expression during its life cycle, where an alignment, or assembly detail, helps retain its original shape. This research outlines the integration of specific and individual anatomical information of wood during the design process. It aids in utilizing the analyzed biological variability and natural irregularities of wood within a material-based architecture, in view of developing a lightweight, and light-filtering dynamic skin. Additionally, the research helps to explore an understanding of the differentiated material composition of wood as its major capacity, rather than its deficiency. Moreover, it analyzes form, material, and structure, as complex interrelations that are embedded in, and explored through an integral design process that seeks to employ typically disregarded, highly differentiated flat materials, in view of enhancing their latent dimensional deformation potential. The main focus of this research is to explore that latent geometric deformation of emerging patterns based on an array of heterogeneous wood veneers in relation to their Hygroscopic and Anisotropic properties. These properties are expressed through a set of flat skins and Mobius arrangements, articulating complex geometric ranges that reveal additional properties, such as bendability and flexibility.
keywords	Shape-shifting, Geometric patterns, Anisotropic, Hygroscopic, Open systems, Building envelope
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	caadria2020_395
id	caadria2020_395
authors	Loo, Stella Yi Ning, Jayashankar, Dhileep Kumar, Gupta, Sachin and Tracy, Kenneth
year	2020
title	Hygro-Compliant: Responsive Architecture with Passively Actuated Compliant Mechanisms
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 1, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 223-232
doi	https://doi.org/10.52842/conf.caadria.2020.1.223
summary	Research investigating water-driven passive actuation demonstrates the potential to transform how buildings interact with their environment while avoiding the complications of conventionally powered actuation. Previous experiments evidence the possibilities of bi-layer materials (Reichert, Menges, and Correa 2015; Correa et al. 2015) and mechanical assemblies with discretely connected actuating members (Gupta et al. 2019). By leveraging changes in weather to power actuated building components these projects explore the use of smart biomaterials and responsive building systems. Though promising the implementation of these technologies requires deep engagement into material synthesis and fabrication. This paper presents the design and prototyping of a rain responsive faÃ§ade system using chitosan hygroscopic films as actuators counterbalanced by programmed compliant mechanisms. Building on previous work into chitosan film assemblies this research focuses on the development of compliant mechanisms as a means of controlling movement without over-complicated rotating parts.
keywords	Passive Actuation; Responsive Architecture; Bio-polymers; 4D Structures; Compliant Mechanism
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2015_122
id	ecaade2015_122
authors	Agirbas, Asli
year	2015
title	The Use of Digital Fabrication as a Sketching Tool in the Architectural Design Process - A Case Study
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 319-324
doi	https://doi.org/10.52842/conf.ecaade.2015.2.319
wos	WOS:000372316000037
summary	Computer-aided manufacturing (CAM) technologies including computer numerically controlled (CNC) milling, laser cutting and 3D printing are becoming cheaper and globally more accessible. Accordingly, many design professionals, academics and students have been able to experience the benefits and challenges of using digital fabrication in their designs. The use of digital fabrication in the education of architecture students has become normal in many schools of architecture, and there is a growing demand for computer-aided manufacturing (CAM) logic and fabrication knowledge in student learning. Clearly, architecture students are acquiring material base-thinking, time management, production methods and various software skills through this digital fabrication. However, it appears to be the case that architecture students use digital fabrication mainly in the final stage of their design or in their finishing work. In this study, computer-aided manufacturing (CAM) technologies have been used as a sketch tool rather than simply for fabricating a final product in the architectural design process and the advantages of this educational practice are demonstrated.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=79005d78-6fe6-11e5-b555-13a7f78815dc
last changed	2022/06/07 07:54

_id	caadria2015_202
id	caadria2015_202
authors	Amtsberg, Felix; Felix Raspall and Andreas Trummer
year	2015
title	Digital-Material Feedback in Architectural Design
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 631-640
doi	https://doi.org/10.52842/conf.caadria.2015.631
summary	This paper studies the architectural potential of the implementation of material feedback using computer vision before and during an automated fabrication process. The combination of an industrial robot and a 3D camera is used expand the typical one-way design and fabrication process (from a digital design to a physical output), to a feedback loop, where specific material information becomes the main trigger of design decisions and fabrication processes. Several projects developed by the authors and tested during a robotic workshop aim to unveil different aspects of material feedback in architectural design, opening a discussion for the benefit and challenges of this new approach to design and fabrication.
keywords	Material feedback; robotic fabrication; computer vision; digital workflow; robotic workshop;
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2015_8.27
id	sigradi2015_8.27
authors	Boas, Naylor Vilas
year	2015
title	Digital Urban Simulators: Representation and Interaction with the History of the Cities
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 308-316.
summary	This work aims to expose the methodological process of the construction of a digital urban simulator called “SIMRio”, that is being developed at the Laboratory of Digital Representation and Urban Analysis. Constructed with the technology of videogames, through the use of its engines applied to digital 3d models of central area of Rio de Janeiro, the research has the objective to develop interactive systems where one could virtually visit, in real time, not only the spaces of the city, but also different times of its history, walking between them as if were in a digital time machine.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2017_031
id	caadria2017_031
authors	Crolla, Kristof, Williams, Nicholas, Muehlbauer, Manuel and Burry, Jane
year	2017
title	SmartNodes Pavilion - Towards Custom-optimized Nodes Applications in Construction
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 467-476
doi	https://doi.org/10.52842/conf.caadria.2017.467
summary	Recent developments in Additive Manufacturing are creating possibilities to make not only rapid prototypes, but directly manufactured customised components. This paper investigates the potential for combining standard building materials with customised nodes that are individually optimised in response to local load conditions in non-standard, irregular, or doubly curved frame structures. This research iteration uses as a vehicle for investigation the SmartNodes Pavilion, a temporary structure with 3D printed nodes built for the 2015 Bi-City Biennale of Urbanism/Architecture in Hong Kong. The pavilion is the most recent staged output of the SmartNodes Project. It builds on the findings in earlier iterations by introducing topologically constrained node forms that marry the principals of the evolved optimised node shape with topological constraints imposed to meet the printing challenges. The 4m high canopy scale prototype structure in this early design research iteration represents the node forms using plastic Fused Deposition Modelling (FDM).
keywords	Digital Fabrication; Additive Manufacturing; File to Factory; Design Optimisation; 3D printing for construction
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2015_10.307
id	sigradi2015_10.307
authors	Herrera, Pablo C.
year	2015
title	Mathematics and computation: Using visual programming to develop didactic materials in a learning environment
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 581-588.
summary	We analyse the problem of creating didactic material for teaching and evaluating mathematics in the first year of a School of Architecture. By using visual programming, science professor used codes (formulae) to represent in a software their proposals, instead of drawing them themselves. Through this experience we create a database of codes with computational solutions that allows faculty to modify, reuse, visualise and print in the same platform that she students will use while developing their designs. In this way we aim to maximise the link between mathematics and design as fundamental base for the control of complex shapes.
keywords	Visual Programming, Mathematics Education, Architectural Education, Latin America, 3D Printing
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	caadria2015_105
id	caadria2015_105
authors	Hosny, A.; N. Jacobson and Z. Seibold
year	2015
title	Voxel Beam
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 755-764
doi	https://doi.org/10.52842/conf.caadria.2015.755
summary	Voxelbeam explores precedents in the optimization of architectural structures, namely the Sydney Opera house Arup beam. The authors research three areas crucial to conceiving an innovative contemporary reinterpretation of the beam: A shift in structural analysis techniques from analytical to numerical models such as topology optimization, the fundamental differences between digital and analog representations of structural forces, and the translation of structural analysis data into methods for digital fabrication. The research aims to re-contextualize the structural beam within contemporary digital platforms, explores the architectural implications of topology optimization, and proposes two fabrication strategies based on the analysis results – including automated off-site pre-casting and multi-material 3d printing.
keywords	Digital Fabrication, Topology Optimization, Multi-material 3D Printing, Emergent Structural Design, Arup Beam.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	ecaade2015_329
id	ecaade2015_329
authors	Kieferle, Joachim and Woessner, Uwe
year	2015
title	BIM Interactive - About combining BIM and Virtual Reality - A Bidirectional Interaction Method for BIM Models in Different Environments
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 69-75
doi	https://doi.org/10.52842/conf.ecaade.2015.1.069
wos	WOS:000372317300008
summary	The basic concept of BIM is a consistent 3D model of buildings containing all main data as base for collaboration for all disciplines. Since BIM-software is normally run on single workstations, the potential for direct collaboration is somehow limited. The focus of our ongoing research is to overcome these restrictions and to provide a platform for development and optimization by combining BIM and Virtual Reality (VR), linking BIM (Revit) with VR (COVISE). Projects as well as data can be visualized in VR and reviewed 1:1 scale even in team meetings. Compared to various existing approaches, our new approach is to have bidirectional data exchange between the systems. Changes in Revit are directly reflected in VR and vice versa, continuously updating the model and its underlying database. We have been able to implement a range of interactions, however it's still a long way to identify further useful interactions and to implement them.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2015_140
id	ecaade2015_140
authors	Kowal, Slawomir; Koszewski, Krzysztof, Slyk, Jan and Wrona, Stefan
year	2015
title	Parametric Methods in Reconstruction of the Medieval Proto-Town in Pultusk, Poland
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 695-700
doi	https://doi.org/10.52842/conf.ecaade.2015.1.695
wos	WOS:000372317300075
summary	This paper describes methods, processes and the outcome of the reconstruction in the medieval wooden settlement complex in Pultusk, Poland. It is the result of the interdisciplinary cooperation between architects from Warsaw University of Technology and archaeologists from Regional Museum of Pultusk. They have undertaken the research issues of information exchange and knowledge-building processes in the digital environment. Main issues were related to the methods of computer reconstruction in architectural and urban scale, which enable alternative narrative threads. To achieve this, parametric techniques were adopted and the 'Pultusk Recontructor' application was developed in Grasshopper. The interaction between architects and archaeologists over hypotheses and alternatives was supported in urban scale by 'Rapid Reconstruction Modular Model'. This 3D printed urban model, consist of segments which can be simultaneously exchanged. It became not only a substrate for scientific debate, but also may serve an education role for the permanent Museum exhibition.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=21013e32-702a-11e5-99b6-d34246563b4e
last changed	2022/06/07 07:51

_id	caadria2015_065
id	caadria2015_065
authors	Matsubayashi, Michio; and Shun Watanabe
year	2015
title	Generating Schematic Diagrams of MEP Systems from 3D Building Information Models for Use in Conservation
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 293-302
doi	https://doi.org/10.52842/conf.caadria.2015.293
summary	In this paper, we propose a method of generating schematic diagrams from 3D models of mechanical, electrical and plumbing (MEP) systems in order to represent this information in a more traditional, user-friendly format. It can be difficult to grasp the relationships between various MEP elements in building information models (BIM) because they are represented in a visually complex, three-dimensional manner. On the other hand, the relationships between building elements can be easily understood when using traditional schematic diagrams. First, sets of connected elements are extracted from a 3D model of MEP elements using their connection properties. Next, various elements of these systems are identified as nodes and their connections are represented as edges. Finally, these systems are displayed as a schematic diagram using element attribute information.
keywords	BIM; Schematic Diagram; Attribute Information; Graph; Existing Buildings.
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	cf2015_381
id	cf2015_381
authors	Menegotto, José Luis
year	2015
title	A framework for speech-oriented CAD and BIM systems
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 381.
summary	This article discusses the development of a Speech Oriented Graphics Interface embedded in CAD and BIM software. The aim is to provide the means to work with complex 3D BIM models with minimal touch operations. We can cite the growing need for tools and user interfaces to assist designers in handling complex models, minimizing the risk of producing changes accidentally. In this area, the integration of a graphical database in BIM applications can be seen as an advantage over traditional CAD applications. However, we can note a difficulty in this integration, due to the need to maintain the constant levels of mental concentration required in order to effectively manage a larger inter-connected graphical database. Specifically in this area, voice interfaces can help by avoiding the need of "touch" to work with the 3D models, looking for improving its robustness and consistency. In addition, SR is used in order to reduce cognitive stress among the users, trying eliminating the need to memorize and remember commands, names and locations in GUI interfaces.
keywords	Accessibility, Text to Speech, Speech Recognition, CAD-BIM.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	sigradi2015_3.268
id	sigradi2015_3.268
authors	Naboni, Roberto; Mirante, Lorenzo
year	2015
title	Metamaterial computation and fabrication of auxetic patterns for architecture
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 129-136.
summary	The paper investigates the potential of auxetics in architectural applications by means of computational design and additive manufacturing. This class of metamaterials expresses interesting behaviour related to the unusual characteristics of a negative Poisson’s ratio. Different patterns have been studied through a design workflow based on parametric software and the use of Particle Spring systems to support the form-finding process of bending-active auxetic structures. An advanced understanding of their bending capacity is explored with the use of variable infill patterns informed by structural analysis. Furthermore, principles for the design and fabrication of auxetic gridshells are discussed.
keywords	Auxetics, Computational Design, Form-Finding, Synclastic Shell, 3D-printing
series	SIGRADI
email
last changed	2016/03/10 09:55

For more results click below: