Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 589

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2015_067
id	caadria2015_067
authors	Choi, Jungsik; Minchan Kim and Inhan Kim
year	2015
title	A Methodology of Mapping Interface for Energy Performance Assessment Based on Open BIM
doi	https://doi.org/10.52842/conf.caadria.2015.417
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 417-426
summary	Early design phase energy modelling is used to provide the design team with feedback about the impact of various building configurations. For better energy-conscious and sustainable building design and operation, the construction of BIM data interoperability for energy performance assessment in the early design phase is important. The purpose of this study is to suggest a development of BIM data interoperability for energy performance assessment based on BIM. To archive this, the authors have investigated advantages of BIM-based energy performance assessment through comparison with traditional energy performance assessment; and suggest requirements for development of Open BIM environment such as BIM data creation and BIM data application. In addition, the authors also suggested on BIM data interoperability system and developed mapping interface.
keywords	Building Information Modelling (BIM); Energy Performance Assessment (EPA); Data Interoperability; Energy Property; Industry Foundation Classes (IFC).
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2015_169
id	ecaade2015_169
authors	Nakama, Yuki; Onishi, Yasunobu and Iki, Kazuhisa
year	2015
title	Development of Building Information Management System with Data Collecting Functions based on IoT Technology
doi	https://doi.org/10.52842/conf.ecaade.2015.1.647
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 647-655
wos	WOS:000372317300070
summary	Facility management is aimed at energy saving, increasing the lifespan of buildings, enhancing the satisfaction of facility users and reducing running costs. To that end, it is important to grasp the conditions of the building in detail, and to analyze them one by one in order to execute building operation and maintenance strategically. However, conventional CAFM is insufficient. Therefore, we developed a system (called Building Information Management System) to utilize BIM data made on a Web site. We used groupware to support the system and an information platform that enables continuous management of a great variety of maintenance information. In addition, we developed a system to input information of building operation and maintenance using a mobile device on the site of checking and patrolling so as to reduce the burden of inputting information. A sensor network is used to acquire building operation and maintenance information to enhance building operation and maintenance. We also developed a system to automatically input sensing information into the building information for Building Information Management System, and to connect it with a 3D model. It has therefore become easier to collect the large amount of information necessary for strategic building operation and maintenance.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=0d63b958-7021-11e5-a1ec-00190f04dc4c
last changed	2022/06/07 07:59

_id	caadria2015_012
id	caadria2015_012
authors	Nakama, Yuki; Yasunobu Onishi and Kazuhisa Iki
year	2015
title	Development of Building Information Management System Using BIM toward Strategic Building Operation and Maintenance
doi	https://doi.org/10.52842/conf.caadria.2015.397
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 397-406
summary	Facility management is aimed at energy saving, increasing the lifespan of buildings, enhancing the satisfaction of facility users and reducing running costs. To that end, it is important to grasp the conditions of the building in detail, and to analyze them one by one in order to execute building operation and maintenance strategically. However, conventional CAFM is insufficient. Therefore, we developed a system (called Building Information Management System) to utilize BIM data made in BIM-CAD on a Web site. We used groupware to support the system and an information platform that enables flexible management of a great variety of maintenance information. In addition, we developed an environmental measurement module and built a structure to sensor information automatically by using a development system. For quality maintenance, detailed information of building operation and maintenance is both from human input and sensors. The proposed method analysis of a building and provides the foundation for strategic control of maintenance.
keywords	BIM, FM, Groupware, Web application, Sensor
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2015_077
id	caadria2015_077
authors	Shiff, Galit; Yael Gilad and Amos Ophir
year	2015
title	Adaptive Polymer Based BIPV Skin
doi	https://doi.org/10.52842/conf.caadria.2015.345
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 345-354
summary	This study focuses on developing three-dimensional solar panels, as an alternative to traditional flat Photovoltaic (PV) surfaces in Building Integrated Photovoltaic (BIPV). We propose to increase the energy efficiency of buildings by using the entire envelope for energy production as well as by increasing the efficiency of solar energy output in orientations which were traditionally considered as non-ideal. The panels are constructed from Polycarbonate with integrated flexible photovoltaic film, solar paint or dye. The methodology included digital algorithm-based tools for achieving optimized variable three-dimensional surfaces according to local orientation and location, computational climatic simulations and comparative field tests. In addition, the structural, mechanical and thermal properties of the integration between flexible PV sheets and hard plastic curved panels were studied. Interim results demonstrate a potential improvement of 50-80% in energy production per building unit resulting from geometric variations per-se. The dependence of energy production by surface geometry was revealed and an optimized method for solar material distribution on the surface was proposed. A parametric digital tool for automatic generation of optimized three-dimensional panels was developed together with a database and material models of the optimized panels system.
keywords	Building Integrated Photovoltaics; digital algorithm; climatic simulations; building envelope
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	eaea2015_t3_paper02
id	eaea2015_t3_paper02
authors	Acacia, Simonetta; Casanova, Marta
year	2015
title	Recording and Publishing to Ensure Informed Choices for Future Generations
source	ENVISIONING ARCHITECTURE: IMAGE, PERCEPTION AND COMMUNICATION OF HERITAGE [ISBN 978-83-7283-681-6],Lodz University of Technology, 23-26 September 2015, pp.290-298
summary	The paper presents the practical example of an information system applied to the built heritage, in particular to the Albergo dei Poveri, a monumental complex in the city of Genoa. A huge number of data and information have been organized in one database, in order to provide a synthesis of the building, acquainted with its complexity, and at the same time allow an in-depth knowledge; the graphical visualization by means of GIS eases to query the database. The final purpose of this work is to publish the project as a web-GIS that will allow all the interested parts to easily access and consult the wide knowledge and use it to make well-informed decisions about the conservation of built heritage.
keywords	GIS; knowledge; historical building
series	EAEA
email
last changed	2016/04/22 11:52

_id	acadia15_357
id	acadia15_357
authors	Ashour, Yassin; Kolarevic, Branko
year	2015
title	Heuristic Optimization in Design
doi	https://doi.org/10.52842/conf.acadia.2015.357
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 357-369
summary	This paper presents a workflow called the ‘heuristic optimization workflow’ that integrates Octopus, a Multi-Objective Optimization (MOO) engine with Grasshopper3D, a parametric modeling tool, and multiple simulation software. It describes a process that enables the designer to integrate disparate domains via Octopus and complete a feedback loop with the developed interactive, real-time visualization tools. A retrospective design of the Bow Tower in Calgary is used as a test case to study the impact of the developed workflow and tools, as well as the impact of MOO on the performance of the solutions. The overall workflow makes MOO based results more accessible to designers and encourages a more interactive ‘heuristic’ exploration of various geometric and topological trajectories. The workflow also reduces design decision uncertainty and design cycle latency through the incorporation of a feedback loop between geometric models and their associated quantitative data. It is through the juxtaposition of extreme performing solutions that serendipity is created and the potential for better multiple performing solutions is increased.es responsive systems, which focus on the implementation of multi-objective adaptive design prototypes from sensored environments. The intention of the work is to investigate multi-objective criteria both as a material system and as a processing system by creating prototypes with structural integrity, where the thermal energy flow through the prototype, to be understood as a membrane, can be controlled and the visual transparency altered. The work shows performance based feedback systems and physical prototype models driven by information streaming, screening, and application.
keywords	Multi-Objective Optimization, Generative Design, Performance-Based Design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia16_362
id	acadia16_362
authors	Beesley, Philip; Ilgun, Zeliha, Asya; Bouron, Giselle; Kadish, David; Prosser, Jordan; Gorbet, Rob; Kulic, Dana; Nicholas, Paul; Zwierzycki, Mateusz
year	2016
title	Hybrid Sentient Canopy: An implementation and visualization of proprioreceptive curiosity-based machine learning
doi	https://doi.org/10.52842/conf.acadia.2016.362
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 362-371
summary	This paper describes the development of a sentient canopy that interacts with human visitors by using its own internal motivation. Modular curiosity-based machine learning behaviour is supported by a highly distributed system of microprocessor hardware integrated within interlinked cellular arrays of sound, light, kinetic actuators and proprioreceptive sensors in a resilient physical scaffolding system. The curiosity-based system involves exploration by employing an expert system composed of archives of information from preceding behaviours, calculating potential behaviours together with locations and applications, executing behaviour and comparing result to prediction. Prototype architectural structures entitled Sentient Canopy and Sentient Chamber developed during 2015 and 2016 were developed to support this interactive behaviour, integrating new communications protocols and firmware, and a hybrid proprioreceptive system that configured new electronics with sound, light, and motion sensing capable of internal machine sensing and externally- oriented sensing for human interaction. Proprioreception was implemented by producing custom electronics serving photoresistors, pitch-sensing microphones, and accelerometers for motion and position, coupled to sound, light and motion-based actuators and additional infrared sensors designed for sensing of human gestures. This configuration provided the machine system with the ability to calculate and detect real-time behaviour and to compare this to models of behaviour predicted within scripted routines. Testbeds located at the Living Architecture Systems Group/Philip Beesley Architect Inc. (LASG/PBAI, Waterloo/Toronto), Centre for Information Technology (CITA, Copenhagen) National Academy of Sciences (NAS) in Washington DC are illustrated.
keywords	intedisciplinary/collaborative design, intelligent environments, artificial intelligence, sensate systems
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	cf2015_331
id	cf2015_331
authors	Brodeschi, Michal; Pilosof, Nirit Putievsky and Kalay, Yehuda E.
year	2015
title	The definition of semantic of spaces in virtual built environments oriented to BIM implementation
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 331-346.
summary	The BIM today can be a provider of inputs to performance analysis of different phenomena such as thermal comfort, energy consumption or winds. All these assessments are fundamental to the post occupation of the building. The attainment of approximate information of how the future building would behave under these conditions will reduce the waste of materials and energy resources. The same idea is used for evaluating the users occupation. Through simulation of human behavior is possible to evaluate which design elements can be improved. In complex structures such as hospital buildings or airports is quite complex for architects to determine optimal design solutions based on the tools available nowadays. These due to the fact users are not contemplated in the model. Part of the data used for the simulation can be derived from the BIM model. The three-dimensional model provides parametric information, however are not semantically enriched. They provide parameters to elements but not the connection between them, not the relationship. It means that during a simulation Virtual Users can recognize the elements represented in BIM models, but not what they mean, due to the lack of semantics. At the same time the built environment may assume different functions depending on the physical configuration or activities that are performed on it. The status of the space may reveal differences and these changes occur constantly and are dynamic. In an initial state, a room can be noisy and a moment later, quiet. This can determine what type of activities the space can support according to each change in status. In this study we demonstrate how the spaces can express different semantic information according to the activity performed on it. The aim of this paper is to simulate the activities carried out in the building and how they can generate different semantics to spaces according to the use given to it. Then we analyze the conditions to the implementation of this knowledge in the BIM model.
keywords	BIM, Virtual Sensitive Environments, Building Use Simulation, Semantics.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	cf2015_384
id	cf2015_384
authors	Cursi, Stefano; Simeone, Davide and Toldo, Ilaria
year	2015
title	A semantic web approach for built heritage representation
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 384.
summary	In a built heritage process, meant as a structured system of activities aimed at the investigation, preservation, and management of architectural heritage, any task accomplished by the several actors involved in it is deeply influenced by the way the knowledge is represented and shared. In the current heritage practice, knowledge representation and management have shown several limitations due to the difficulty of dealing with large amount of extremely heterogeneous data. On this basis, this research aims at extending semantic web approaches and technologies to architectural heritage knowledge management in order to provide an integrated and multidisciplinary representation of the artifact and of the knowledge necessary to support any decision or any intervention and management activity. To this purpose, an ontology-based system, representing the knowledge related to the artifact and its contexts, has been developed through the formalization of domain-specific entities and relationships between them.
keywords	Built Heritage, Knowledge-based model, Ontology-based systems, Building Information Modeling, Semantic web technologies.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	ecaade2015_83
id	ecaade2015_83
authors	Fukuda, Tomohiro; Mori, Keisuke and Imaizumi, Jun
year	2015
title	Integration of CFD, VR, AR and BIM for Design Feedback in a Design Process - An Experimental Study
doi	https://doi.org/10.52842/conf.ecaade.2015.1.665
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 665-672
wos	WOS:000372317300072
summary	To improve indoor thermal environment, it is necessary to promote a lean design process, so forecasting and consensus building by experiment and numerical calculation from the design stage have become essential. Rapid advances in software and hardware allow feedback to be generated on novel design alternatives, rather than relying on simulation results based on past designs. However, this concept has not been fully verified. Therefore, this study presents an integrated design tool which consists of Computational Fluid Dynamics (CFD), Virtual Reality (VR), Augmented Reality (AR) and Building Information Modeling (BIM). The tool was applied to the problems of an actual housing design project. Both the content of design feedback on design problems revealed through simulations in the project, and the features in the feedback process were discussed.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2015_158
id	ecaade2015_158
authors	Kim, Do-Young; Jang, DoJin and author), Sung-AhKim
year	2015
title	A Symbiotic Interaction of Virtual and Physical Models in Designing Smart Building Envelope
doi	https://doi.org/10.52842/conf.ecaade.2015.2.633
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 633-642
wos	WOS:000372316000070
summary	The building needs to be designed to minimize its environmental footprint and to be sufficiently adaptive to changing indoor and outdoor environmental conditions. The smart building envelope is an interactive system which is adaptive to environmental conditions by transforming its shape and functions. This is a kind of machine, not like a traditional building component, which should be based on integrated engineering design methods in addition to the exploration of formal aesthetics. As artistic genius or technical skill alone cannot not fully support the design of such a novel product, the design needs to be systemized by introducing a product development method such as prototyping in other industries. Prototyping needs to be integrated in school environment, even if it requires fundamental reconfiguration of current computer-based design studios. This paper aims at proposing a teaching methodology for educating the prototyping-based design of smart building envelope system in digital design studio. This methodology allows novice designers to operate interactions between virtual-physical models. And sketches are used to share ideas to other collaborators such as programming, mechanical operations without technical knowledge. The interactions between virtual-physical models and sketches contribute to not only complement virtual models and physical models, but also achieve high-performance of smart building envelope practically.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=215b1984-6e90-11e5-9ee8-00190f04dc4c
last changed	2022/06/07 07:52

_id	caadria2015_179
id	caadria2015_179
authors	Kim, Eonyong; Jongtaek Yun and Sanghyun Cho
year	2015
title	Integrated Space and Asset Management System for Large Scale Airport
doi	https://doi.org/10.52842/conf.caadria.2015.807
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 807-816
summary	Large-scale airports such as Incheon International Airport have large-scale terminals, annex buildings, and numerous open spaces. An integrated space management system is required to manage these buildings and spaces efficiently. Thus, Incheon International Airport Corporation developed a 3D computer-aided design (CAD)-based integrated space management system. The major system development goal was to provide intuitive 3D-based visual information, thereby realizing an integrated space and asset management system that does not require expert knowledge of any specific field, such as architecture. This paper discusses the construction of the system and the problems that had to be resolved to achieve this goal.
keywords	Space and asset management, airport, 3D CAD, BIM
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2015_139
id	ecaade2015_139
authors	Krietemeyer, Bess and Rogler, Kurt
year	2015
title	Real-Time Multi-Zone Building Performance Impacts of Occupant Interaction with Dynamic Façade Systems
doi	https://doi.org/10.52842/conf.ecaade.2015.2.669
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 669-678
wos	WOS:000372316000074
summary	Recent developments in responsive electroactive materials are increasing the rate at which next-generation façade technologies can respond to environmental conditions, building energy demands, and the actions of building occupants. Simulating the real-time performance of dynamic façade systems is critical for understanding the impacts that occupant response will have on whole-building energy performance and architectural design. This paper describes a method for real-time analysis of the multi-zone building performance impacts of occupant interaction with a dynamic façade system, the Electroactive Dynamic Display System (EDDS). The objective is to optimize EDDS implementation and define system limitations, incorporate EDDS as a dynamic factor in multi-zone building energy analyses, and provide real-time feedback of building performance data based on environmental conditions and occupant interactions. Preliminary results of parametric simulation methods demonstrate the ability of dynamic façade systems to consider real-time occupant interaction in the analysis of daylighting and thermal performance of buildings.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	cf2015_241
id	cf2015_241
authors	Popescu, Florin C.
year	2015
title	Algorithmic design tool for integrating renewable energy infrastructures in buildings
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 241.
summary	We present a tool which empowers 'green' design freedom for architects by presenting ever expanding choices in components and materials and automatizing their configuration and placement. Several time- and resource- consuming initial design iterations are eliminated by optimizing the energetic efficiency of the building in the original draft phase. The smart, efficient, energy producing building of the future can thereby offer increased cost and energy efficiency, security and comfort, without any compromise in style and form - on the contrary, the proposed tool stands to open up a novel palette of creative 'green' architectural design elements, which would effectively be co-designed by architects. The proposed algorithmic CAD design tool allows direct integration of renewable sources in the architectural design phase, taking into account local meteorological and solar radiation conditions. Furthermore locally optimized evolution and modification of renewable components integrated into the building's structure is possible, leveraging an increasingly wide range of possibilities in form, finish and renewable energy generation.
keywords	Algorithmic and parametric design, data analytics, performance-based design, smart buildings and smarts cities.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	caadria2015_119
id	caadria2015_119
authors	Ryu, Jungrim and Seungyeon Choo
year	2015
title	A Development Direction of a New Archi-Urban Integration Model for Utilizing Spatial Information
doi	https://doi.org/10.52842/conf.caadria.2015.795
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 795-805
summary	For efficient interoperability of information between IFC (a standard open BIM model) and CityGML(a standard model in GIS), the information system is comparatively analysed through IFC, CityGML and LandXML. A direction for developing object-oriented AUIM (Archi-Urban Integration Model) for analysis and maintenance of spatial information is proposed. In this study, LOD for AUIM-based interior spatial information is presented. At the same time, strategies for BIM-GIS convergence are sought.
keywords	Spatial Information, Interoperability, Spatial Data Model Standards, BIM/GIS, Info-Convergence.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2015_38
id	ecaade2015_38
authors	Stavrakantonaki, Marina
year	2015
title	A Framework for Input Data Processing During Building Energy Model Calibration. A Case Study
doi	https://doi.org/10.52842/conf.ecaade.2015.1.625
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 625-634
wos	WOS:000372317300068
summary	Key parameter of a reasoning process supporting real time performance is the use of active heuristics that facilitate the achievement of goals in a timely manner (Dodiawala et al. 1989). A real time approach should incorporate speed, timeliness and adaptation during the execution of tasks. Speed and efficient knowledge processing are addressed for the solution of complex building engineering problems, such as the calibration of Building Energy Models (BEM) to the actual performance data. During retrofit projects, calibrated BEM models aid the design process, and provide a solid base for performative assessments. Despite the demand for building performance evaluations, BEM calibration remains a work-intensive task (Lam et al. 2014). This study proposes a time efficient framework for BEM calibration input data management based on the methodology of a blackboard artificial intelligence knowledge processing system. The resulting model was used for sequential data mining for the energy assessment during the renovation of a commercial building.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=e440bdd6-7021-11e5-bdb0-00190f04dc4c
last changed	2022/06/07 07:56

_id	sigradi2015_8.41
id	sigradi2015_8.41
authors	Valencia, Lorena Troncoso; Alvarado, Rodrigo García; Bernal, Alberto Nope; Arellano, Ricardo
year	2015
title	Solar attic by parametric optimization and digital fabrication for NZE dwellings
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 317-321.
summary	In order to support the usual enlargement of houses in developing countries and proper integration of renewable sources, this paper exposes a parametric design of attic with insulated timber boards and integrated solar panels. The proposal is based on urban map of solar potential available on-line (www.msc.ubiobio.cl), that for single houses suggest a solar attic customized to each dwelling shape and orientation, with industrialized timber construction elements. The calculation of optimal volume by house is developed with a multi-objective genetic algorithm (NSGA-II) and dynamic simulation, which provides different buildings alternatives with digital manufacturing.
keywords	Solar Energy, Timber Building, Housing, Genetic Algorithm, Building Integrated Solar Energy
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	cf2015_383
id	cf2015_383
authors	Wu, Chengde; Zarrinmehr, Saied; Asl, Mohammad Rahmani and Clayton, Mark J.
year	2015
title	Facilitating fire and smoke simulation using Building Information Modeling
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 383.
summary	CFAST is a two-zone model which simulates fire growth and smoke transport. Manually modeling a building using CFAST user interface is a time consuming and error-prone process. In addition, the limitations in CFAST structure impede data transfer between CFAST and BIM (Building Information Modeling). In this research, we identified major limitations of CFAST, proposed solutions to the limitations, and developed a system for data interchange between BIM and CFAST. This greatly facilitated fire and smoke simulation. We further developed a visualization module to visualize the simulation results to overcome the problems when using SmokeView, an application developed by NIST (National Institute of Standards and Technology). A pilot test is conducted using this system. The simulation process was done in just a few minutes. This is expected to help architects to design buildings safer from building fires, and help students in learning building safety and fire related building codes.
keywords	Fire simulation, building information modeling (BIM), CFAST, building fire evacuation
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	cf2015_240
id	cf2015_240
authors	Aksoy, Yazgi Badem; Çagdas, Gülen and Balaban, Özgün
year	2015
title	A model for sustainable site layout design of social housing with Pareto Genetic Algorithm: SSPM
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 240.
summary	Nowadays as the aim to reduce the environmental impact of buildings becomes more apparent, a new architectural design approach is gaining momentum called sustainable architectural design. Sustainable architectural design process includes some regulations itself, which requires calculations, comparisons and consists of several possible conflicting objectives that need to be considered together. A successful green building design can be performed by the creation of alternative designs generated according to all the sustainability parameters and local regulations in conceptual design stage. As there are conflicting criteria's according to LEED and BREAM sustainable site parameters, local regulations and local climate conditions, an efficient decision support system can be developed by the help of Pareto based non-dominated genetic algorithm (NSGA-II) which is used for several possibly conflicting objectives that need to be considered together. In this paper, a model which aims to produce site layout alternatives according to sustainability criteria for cooperative apartment house complexes, will be mentioned.
keywords	Sustainable Site Layout Design, Multi Objective Genetic Algorithm, LEED-BREEAM.
series	CAAD Futures
type	normal paper
email
last changed	2015/06/29 09:30

_id	sigradi2015_2.162
id	sigradi2015_2.162
authors	Almeida, Fernando; Andrade, Max
year	2015
title	GIS as a catalyst tool for Smart Cities
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 46-50.
summary	Every building has its individual and measurable role on resources consumption, waste generation and neighborhood impact within a city, and tracking this behavior is an essential task for establishing a sustainable path into a Smart City model. This paper preliminarily investigates how GIS can contribute in creating an integrated and dynamic system built to attend public utilities and urban management offices for parameters at various scales.
keywords	GIS, Smart Cities, Urban Infrastructure, Public Services, Urban Management
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: