Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 591

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2016_046
id	ecaade2016_046
authors	Tomarchio, Ludovica, Tuncer, Bige, You, Linlin and Klein, Bernhard
year	2016
title	Mapping Planned and Emerging Art Places in Singapore through Social Media Feeds
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 437-446
doi	https://doi.org/10.52842/conf.ecaade.2016.2.437
wos	WOS:000402064400043
summary	This paper presents a methodology to collect and visualize social media data about art, in order to map art locations in cities using geo-localized data, and comparing planning decisions with the actual use of spaces. As various social networks have penetrated into the daily life of people, these become one important and effective data source to understand how people perform 'arts' around the city [Shah, 2015]. The case study for this methodology is Singapore, a vibrant city where art and culture are being promoted in the light of an emerging creative economy. The Singapore government promotes art and creates 'art clusters', such as art districts, galleries, fairs and museums in the city. Additionally, artists, creative entrepreneurs, consumers, and critics seek and explore alternative spaces. Understanding where art and creativity are discussed, broadcasted and consumed in Singapore is a key point to have better insights into art space planning, and study its effects on the city.The paper will try to answer the following research question:Is it possible to discover, through social network data, spaces where art is produced, discussed, and broadcasted to an audience in Singapore? How?
keywords	social- media; art; creative city; creative places
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2015_173
id	ecaade2015_173
authors	Üsküplü, Taner and Çolako_lu, Birgül
year	2015
title	Using Location-Based Social Network Data and Urban Topological Analyses for Predicting City Center Expansion Zones
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 539-544
doi	https://doi.org/10.52842/conf.ecaade.2015.1.539
wos	WOS:000372317300058
summary	This paper introduces an ongoing study that aims to combine location-based social network analyses and topological space syntax analyses for reading the city and developing urban strategies, compatibly with city center expansion trends. This study focuses on: a) Analyzing/visualization of the big data that emerged from location-based social networks that exposes activity trends of the study area. b) Revealing relationships between activity distribution and potential movement axes -that achieved through space syntax analysis- c) Evaluating potential movement axes and activity trend relations for reasoning urban decision making.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=84c29f10-70d9-11e5-9e88-4fdbf1ba31b3
last changed	2022/06/07 07:52

_id	ecaade2024_35
id	ecaade2024_35
authors	Agkathidis, Asterios; Song, Yang; Symeonidou, Ioanna
year	2024
title	AI-Assisted Design: Utilising artificial intelligence as a generative form-finding tool in architectural design studio teaching
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 2, pp. 619–628
doi	https://doi.org/10.52842/conf.ecaade.2024.2.619
summary	Artificial Intelligence (AI) tools are currently making a dynamic appearance in the architectural realm. Social media are being bombarded by word-to-image/image-to-image generated illustrations of fictive buildings generated by tools such as ‘Midjourney’, ‘DALL-E’, ‘Stable Diffusion’ and others. Architects appear to be fascinated by the rapidly generated and inspiring ‘designs’ while others criticise them as superficial and formalistic. In continuation to previous research on Generative Design, (Agkathidis, 2015), this paper aims to investigate whether there is an appropriate way to integrate these new technologies as a generative tool in the educational architectural design process. To answer this question, we developed a design workflow consisting of four phases and tested it for two semesters in an architectural design studio in parallel to other studio units using conventional design methods but working on the same site. The studio outputs were evaluated by guest critics, moderators and external examiners. Furthermore, the design framework was evaluated by the students through an anonymous survey. Our findings highlight the advantages and challenges of the utilisation of AI image synthesis tools in the educational design process of an architectural design approach.
keywords	AI, GAI, Generative Design, Design Education
series	eCAADe
email
last changed	2024/11/17 22:05

_id	acadia15_263
id	acadia15_263
authors	Ahlquist, Sean
year	2015
title	Social Sensory Architectures: Articulating Textile Hybrid Structures for Multi-Sensory Responsiveness and Collaborative Play
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 263-273
doi	https://doi.org/10.52842/conf.acadia.2015.263
summary	This paper describes the development of the StretchPLAY prototype as a part of the Social Sensory Surfaces research project, focusing on the design of tactile and responsive environments for children with Autism Spectrum Disorder (ASD). The project is directed specifically at issues with sensory processing, the inability of the nervous system to filter sensory input in order to indicate an appropriate response. This can be referred to as a “traffic jam” of sensory data where the intensity of such unfiltered information leads to an over-intensified sensory experience, and ultimately a dis-regulated state. To create a sensory regulating environments, a tactile structure is developed integrating physical, visual and auditory feedback. The structure is defined as a textile hybrid system integrating a seamless knitted textile to form a continuous topologically complex surface. Advancements in the fabrication of the boundary structure, of glass-fiber reinforced rods, enable the form to be more robustly structured than previous examples of textile hybrid or tent-like structures. The tensioned textile is activated as a tangible interface where sensing of touch and pressure on the surface triggers ranges of visual and auditory response. A specific child, a five-year old girl with ASD, is studied in order to tailor the technologies as a response to her sensory challenges. This project is a collaboration with students, researchers and faculty in the fields of architecture, computer science, information (human-computer interaction), music and civil engineering, along with practitioners in the field of ASD-based therapies.
keywords	Textile Hybrid, Knitting, Sensory Environment, Tangible Interface, Responsive systems and environments
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2015_10.177
id	sigradi2015_10.177
authors	Angelo, Alex Garcia Smith; Manna, Ilaria La; Hernandez, Oscar; Valdiviezo, Marlon; Lastras, Alejandra Díaz de León; Salazar, Oscar Ivan Campo; Montezuma, Vanessa; Zubieta, Marco
year	2015
title	Fab Lab and Multiculturalism in Latin America: The Fab Lat Kids case and the project “Emosilla”
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 551-557.
summary	This paper expresses a lecture of the experience of an investigation carried by a group of Latin American Fab Labs dedicated to the promotion of the use of modeling, digital fabrication, and network communication as tools of educational and social development of children in latin culture. This study is based on online workshop typologies with a methodological perspective that included local technological adaptations, data gathering, and exchange of knowledge on the fab lab network.
keywords	Design, Digital Manufacturing, Society, Technology Learning, Collaborative Network
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia23_v3_19
id	acadia23_v3_19
authors	Dickey, Rachel
year	2023
title	Material Interfaces
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 3: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-1-0]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 24-32.
summary	Based on our current daily rate, 85,410 hours is the average amount of time that an adult in the United States will spend on their phone in a lifetime (Howarth 2023). This is time spent texting, tweeting, emailing, snapping, chatting, posting, and interacting with an interface which each of us carry in our pocket. Kelly Dobson explains, “We psychologically view the cell phone as an extension of our bodies, which is why when you accidentally forget it or leave it behind you feel you have lost apart of yourself” (2013). In reality, this device is just one of many technologies which affect our relationship with our bodies and the physical world. Additionally, Zoom meetings, social media networks, on-line shopping, and delivery robots, all increasingly detach our bodies and our senses from our everyday experiences and interactions. In response to digital culture, Liam Young writes, “Perhaps the day will come when we turn off our target ads, navigational prompts, Tinder match notifications, and status updates to find a world stripped bare, where nothing is left but scaffolds and screens” (2015). Make no mistake; the collection of projects shared in these field notes is intended to be a counterpoint to such a prophesied future. However, the intent is not to try to compete with technology, but rather, to consider the built environment itself as an interface, encouraging interaction through feedback and responsivity directly related to human factors, finding ways to re-engage the body through design.
series	ACADIA
type	field note
email
last changed	2024/04/17 13:59

_id	sigradi2020_392
id	sigradi2020_392
authors	Fialho, Beatriz Campos; Codinhoto, Ricardo; Fabricio, Márcio Minto
year	2020
title	BIM and IoT for the AEC Industry: A systematic literature mapping
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 392-399
summary	The AEC industry has been facing a digital transformation for improving services involved in buildings lifecycle, fostered by two disruptive technologies: Building Information Modelling (BIM) and Internet of Things (IoT). However, the literature lacks discussions regarding applications and challenges of BIM and IoT systems in the AEC. This Systematic Literature Mapping addresses this gap through search, analysis, and classification of 75 journal article abstracts published between 2015 and 2019. An increase of articles over the period is observed, predominantly with technical and processual solutions for Construction and Operation and Maintenance. The interoperability of data is a key challenge to organizations.
keywords	Building Information Modelling, Internet of Things, Integration, Network, Smart Cities
series	SIGraDi
email
last changed	2021/07/16 11:49

_id	ecaade2015_247
id	ecaade2015_247
authors	Garcia, Manuel Jimenez and Retsin, Gilles
year	2015
title	Design Methods for Large Scale Printing
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 331-339
doi	https://doi.org/10.52842/conf.ecaade.2015.2.331
wos	WOS:000372316000039
summary	With an exponential increase in the possibilities of computation and computer-controlled fabrication, high density information is becoming a reality in digital design and architecture. However, construction methods and industrial fabrication processes have not yet been reshaped to accommodate the recent changes in those disciplines. Although it is possible to build up complex simulations with millions of particles, the simulation is often disconnected from the actual fabrication process. Our research proposes a bridge between both stages, where one drives the other, producing a smooth transition from design to production. A particle in the digital domain becomes a drop of material in the construction method.The architect's medium of expression has become much more than a representational tool in the last century, and more recently it has evolved even beyond a series of rules to drive from design to production. The design system is the instruction itself; embedding structure, material and tectonics and gets delivered to the very end of the construction chain, where it gets materialised. The research showcased in this paper investigates tectonic systems associated with large scale 3D printing and additive manufacturing methods, inheriting both material properties and fabrication constraints at all stages from design to production. Computational models and custom design software packages are designed and developed as strategies to organise material in space in response to specific structural and logistical input.Although the research has developed a wide spectrum of 3D printing methods, this paper focuses only on two of the most recent projects, where different material and computational logics were investigated. The first, titled Filamentrics, intends to develop free-form space frames, overcoming their homogeneity by introducing robotic plastic extrusion. Through the use of custom made extruders a vast range of high resolution prototypes were developed, evolving the design process towards the fabrication of precise structures that can be materialised using additive manufacturing but without the use of a layered 3D printing method. Instead, material limitations were studied and embedded in custom algorithms that allow depositing material in the air for internal connectivity. The final result is a 3x2x2.5m structure that demonstrates the viability of this construction method for being implemented in more industrial scenarios.While Filamentrics is reshaping the way we could design and build light weight structures, the second project Microstrata aims to establish new construction methods for compression based materials. A layering 3D printing method combines both the deposition of the binder and the distribution of an interconnected network of capillaries. These capillaries are organised following structural principles, configuring a series of channels which are left empty within the mass. In a second stage aluminium is cast in this hollow space to build a continuous tension reinforcement.
series	eCAADe
type	normal paper
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=07a6d8e0-6fe7-11e5-9994-cb14cd908012
last changed	2022/06/07 07:51

_id	sigradi2015_10.127
id	sigradi2015_10.127
authors	Granero, Adriana Edith; Fernández, Mónica Inés; Bonvecchi, Liliana Telma; Brignone, Mabel Clara
year	2015
title	DApp - Interactive teaching methodological proposal based on the use of the devices and Apps for the representation of the architectural project
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 514-518.
summary	A common problem we share teachers today is the presence of smartphones and tablets in the classroom; these electronic devices generate distractions of its use for communication in social networks, games, and visits to Internet sites. These elements are at all times available to the student, which is why we raised the need to adapt some learning processes with their interaction. The intention is to demonstrate that these practices allow for the introduction of theoretical concepts and fundamentals related academic imagination, the design process and representation of the architectural project. The proposal linked with an increase of the professional needs that the architect faces, after their training, professional skills to perform in today’s job market.
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	acadia15_451
id	acadia15_451
authors	Jyoti, Aurgho
year	2015
title	High Rise Morphologies: Architectural Form Finding in a Performative Design Search Space of Dense Urban Contexts
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 451-467
doi	https://doi.org/10.52842/conf.acadia.2015.451
summary	A routine is a fixed program, a sequence of actions regularly followed. And the concept can be adapted at different levels in the understanding of the dynamics of cities. Today's built environments are in fact increasingly characterized by series of iterations daily performed by infrastructures, networks, buildings, and people ? as part of a well-structured pattern of components. In this sense, the city becomes a system that not only creates routine, but also pushes its urban mechanisms, its architectural spaces, and its human interactions towards performance, efficiency and the 'standard.' A-priori and top-down implementations of new technologies emphasize routine-based built environments, leaving almost no room for the (extra)ordinary. But how can the spaces, infrastructures, and places that define the social experience of tangible environments not incorporate elements of inherent spontaneity, informality, and even error that let us break routine patterns?
keywords	Architectural Form Finding, Optimisation, Performative Design Environment, Urban Daylight, Solar Irradiation, Direct Sunlight, Point Cloud, Voxelised Colonies
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	ecaade2015_21
id	ecaade2015_21
authors	Klemmt, Christoph and Bollinger, Klaus
year	2015
title	Cell-Based Venation Systems
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 573-580
doi	https://doi.org/10.52842/conf.ecaade.2015.2.573
wos	WOS:000372316000064
summary	Venation structures in leaves fulfil both circulatory as well as structural functions within the organism they belong to. A possible digital simulation algorithm for the growth of venation patterns based on the leaf surface has been described by the Department of Computer Science at the University of Calgary.Cell-based growth algorithms to generate surface meshes have been developed by biological and medical scientists as well as artists, in order to gain an understanding of developmental biology or to generate artistic form. This paper suggests the combination of the two algorithms in order to generate the morphologies of leaves and other structures while at the same time generating the corresponding venation system.The resulting algorithm develops large non-manifold mesh structures based on local rules of division of the individual cells. The venation system develops in parallel based on the flow of the plant hormone auxin from those cells towards the start point or petiole of the leaf. Different local behaviours of the cells towards their adjacent neighbours, towards their rules of division and towards the rules of developing veins have been investigated. The eventual aim of the algorithms is their application as tools to develop architectural and structural morphologies.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=29c4389a-6e8f-11e5-8666-279b88fbd56c
last changed	2022/06/07 07:52

_id	caadria2015_213
id	caadria2015_213
authors	Kornkasem, Sorachai and John B. Black
year	2015
title	CAAD, Cognition & Spatial Thinking Training
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 561-570
doi	https://doi.org/10.52842/conf.caadria.2015.561
summary	The current study explored different spatial training methods and investigated the sequence of processed-based mental simulation that was facilitated by various structures of external spatial representations, including 3D technology in Computer Aided-Architectural Design (CAAD), spatial cues, and/or technical languages. The goal was to better understand how these components fostered planning experiences and affected spatial ability acquisition framed as the formation of spatial mental models, for further developing spatial training environments fundamental to Science, Technology, Engineering, and Mathematics (STEM) education, specifically for architecture education and cognition. Two experiments were conducted using a between-subjects design to examine the effects of spatial training methods on spatial ability performance. Across both studies learners improved in their spatial skills, specifically the learners in the 3D-augmented virtual environments over the 3D-direct physical manipulation conditions. This study is built upon the work in the fields of computer-user interface, visuospatial thinking and human learning.
keywords	Spatial thinking training; cognitive processes; CAAD.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	sigradi2015_sp_4.275
id	sigradi2015_sp_4.275
authors	Mendes, Leticia Teixeira; Griz, Cristiana; Sedrez, Maycon
year	2015
title	The use of 3D Digitization in experiences of digital documenting historical heritage: the case of Lisbon’s Metropolitano Social Headquarters
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 776-779.
summary	This paper describes the use of 3D digitization to acquire data and to produce technical documentation for the inventory of historical buildings. The object defined as case study is an ornamented window of the Lisbon’s Metropolitano Social Headquarters, project of the architect Norte Júnior, located in the city of Lisbon. The methodology of the research relies on the comparison of two different approaches: (1) the use of Autodesk 123D Catch software to produce a geometric model and (2) the of the software My 3D Scanner to obtain a point cloud and the MeshLab software to obtain a texturized mesh.
keywords	3D Digitization, Architectural Heritage, Photogrammetry, Documentation Technologies, Preservation
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	cf2015_205
id	cf2015_205
authors	Oliveira, Eduardo; Kirley, Michael; Kvan, Tom; Karakiewicz, Justyna and Vaz, Carlos
year	2015
title	Distributed and heterogeneous data analysis for smart urban planning
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 205.
summary	Over the past decade, ‘smart’ cities have capitalized on new technologies and insights to transform their systems, operations and services. The rationale behind the use of these technologies is that an evidence-based, analytical approach to decision-making will lead to more robust and sustainable outcomes. However, harvesting high-quality data from the dense network of sensors embedded in the urban infrastructure, and combining this data with social network data, poses many challenges. In this paper, we investigate the use of an intelligent middleware – Device Nimbus – to support data capture and analysis techniques to inform urban planning and design. We report results from a ‘Living Campus’ experiment at the University of Melbourne, Australia focused on a public learning space case study. Local perspectives, collected via crowdsourcing, are combined with distributed and heterogeneous environmental sensor data. Our analysis shows that Device Nimbus’ data integration and intelligent modules provide high-quality support for decision-making and planning.
keywords	smart city, smart campus, middleware, data fusion, urban design, urban planning.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	ecaade2015_297
id	ecaade2015_297
authors	Park, James and Economou, Athanassios
year	2015
title	The Dirksen Variations - Towards a Generative Description of Mies's Courthouse Language
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 453-462
doi	https://doi.org/10.52842/conf.ecaade.2015.1.453
wos	WOS:000372317300049
summary	A generative description of Mies van der Rohe's courthouse language is presented in the form of a shape grammar. The grounding of the work is based on a set of 135 sketches produced by the office of Mies during the design process of the Everett McKinley Dirksen United States Courthouse in Chicago, and documented in the Mies van der Rohe Archive at the Museum of Modern Art. The work here postulates a set of 39 unique courthouse designs all showcasing distinct variations of the courtroom type in the Miesian language and re-casts them in two-dimensional diagrams to make their differences and similarities transparent. A series of spatial relations between five types of spaces are extracted, including courtrooms, circulation networks, vertical cores, office spaces, and support spaces, and are deployed to specify the shape rules of the grammar. A set of conventions to specify how the two-dimensional diagrams represent three-dimensional models is briefly outlined to prepare the ground for the implementation of the grammar in a three-dimensional shape grammar interpreter.
series	eCAADe
email
last changed	2022/06/07 08:00

_id	cf2015_204
id	cf2015_204
authors	Psyllidis, Achilleas; Bozzon, Alessandro; Bocconi, Stefano and Bolivar, Christiaan Titos
year	2015
title	A platform for urban analytics and semantic data integration in city planning
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 204.
summary	This paper presents a novel web-based platform that supports the analysis, integration, and visualization of large-scale and heterogeneous urban data, with application to city planning and decision-making. Motivated by the non-scalable character of conventional urban analytics methods, as well as by the interoperability challenges present in contemporary data silos, the illustrated system – coined SocialGlass – leverages the combined potential of diverse urban data sources. These include sensor and social media streams (Twitter, Instagram, Foursquare), publicly available municipal records, and resources from knowledge repositories. Through data science, semantic integration, and crowdsourcing techniques the platform enables the mapping of demographic information, human movement patterns, place popularity, traffic conditions, as well as citizens’ and visitors’ opinions and preferences about specific venues in a city. The paper further demonstrates an implemented prototype of the platform and its deployment in real-world use cases for monitoring, analyzing, and assessing city-scale events.
keywords	urban analytics, semantic integration, crowdsourcing, ontologies, SocialGlass, urban computing, smart cities.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	acadia15_497
id	acadia15_497
authors	Sandoval Olascoaga, Carlos; Victor-Faichney, John
year	2015
title	Flows, Bits, Relationships: Construction of Deep Spatial Understanding
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 497-512
doi	https://doi.org/10.52842/conf.acadia.2015.497
summary	The number of variables acting upon urban landscapes is numerous and interconnected, closely resembling complex systems in constant dynamic transformation. Current analytical methods and descriptions of the city are domain specific, limited in scope, and discretize the city into quantifiable individual representations, resulting in an equally limited urban policy and design. If we are to produce urban systems capable of contributing to the robustness and resiliency of cities, we ought to understand and represent the comprehensive network of actors that construct contemporary urban landscapes. On one hand, the natural sciences approach the analysis of complex systems by primarily focusing on the development of models capable of describing their stochastic formation, remaining agnostic to the contextual properties of their individual components and oftentimes discretizing the otherwise continuous relationships among parts. signers work in groups. They need to share information either synchronously or asynchronously as they work with parametric modeling software, as with all computer-aided design tools. Receiving information from collaborators while working may intrude on their work and thought processes. Little research exists on how the reception of design updates influences designers in their work. Nor do we know much about designer preferences for collaboration. In this paper, we examine how sharing and receiving design updates affects designers’ performances and preferences. We present a system prototype to share changes on demand or in continuous mode while performing design tasks. A pilot study measuring the preferences of nine pairs of designers for different combinations of control modes and design tasks shows statistically significant differences between the task types and control modes. The types of tasks affect the preferences of users to the types of control modes. In an apparent contradiction, user preference of control modes contradicts task performance time.
keywords	Networks, graphs, web-mapping, GIS, urban mapping, spatial analysis, urban databases, visual representation, spatial cognition
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	cf2015_460
id	cf2015_460
authors	Sperling, David M.; Herrera, Pablo C. and Scheeren, Rodrigo
year	2015
title	Migratory movements of Homo Faber Mapping Fab Labs in Latin America
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 460.
summary	The present paper is a mapping study of digital fabrication laboratories in Latin America. It presents and discusses results from a survey with 31 universities’ fab labs, studios and independent initiatives in Latin America. The objective of this study is fourfold: firstly, to draw the cultural, social and economic context of implementation of digital fabrication laboratories in the region; secondly, to synthesize relevant data from correlations between organizational structures, facilities and technologies, activities, types of prototypes, uses and areas of application; thirdly, to draw a network of people and institutions, recovering connections and the genealogy of these fab labs; and fourthly, to present some fab labs that are intertwined with local questions. The results obtained indicate a complex “homo faber” network of initiatives that embraces academic investigations, architectural developments, industry applications, artistic propositions and actions in social processes.
keywords	digital fabrication, fab labs, Latin America, mapping.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	sigradi2015_3.212
id	sigradi2015_3.212
authors	Sperling, David M.; Herrera, Pablo C.; Celani, Gabriela; Scheeren, Rodrigo
year	2015
title	Digital Fabrication in South America: mapping lines of action from architecture and urbanism
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 119-125.
summary	The article presents a mapping of digital fabrication laboratories in South America from the architecture and urbanism field. First, it draws a brief context of implementation of facilities and growing of expertise highlighting economic, academic and cultural aspects. Second, it presents some data mapped from 31 laboratories of the region, as infrastructure, and correlations between uses and applications. Third, it organizes the mapped laboratories in two significant approaches for the region’s context: works focused on technological development and actions directed to the social and environmental development. Fourth, it infers some possible steps of the field in the region in the near future.
keywords	Digital Fabrication, Laboratories, South America, Technological Development, Social and Environmental Development
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	cf2015_358
id	cf2015_358
authors	Tonn, Christian and Bringmann, Oliver
year	2015
title	Point Clouds to BIM: Methods for Building Parts Fitting in Laser Scan Data
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 358-369.
summary	New construction within existing buildings requires documentation of the existing buildings, in a form that one is familiar with from new construction or architectural design. Laser scanning is a powerful tool to survey the built reality. It provides a replica of the existing building in the form of a point cloud. The difficulty is to analyse the resulting amounts of data that has been generated and being able to interpret it as a Building Information Model (BIM). This article proposes a new generic approach for pattern recognition of architectural objects. The procedure is introduced through the use of two examples - polygon fitting, which is important for the generation of new building element classes and wall detection. The second part describes how individual components can be automatically connected to consistent networks. BIM systems walls should be aligned, within predefined limits of accuracy, either perpendicular to or in line with each other.
keywords	point cloud, BIM, pattern recognition, components, wall alignment.
series	CAAD Futures
email
last changed	2015/06/29 07:55

For more results click below: