Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 565

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2015_139
id	caadria2015_139
authors	Herr, Christiane M. and Ryan C. Ford
year	2015
title	Adapting Cellular Automata as Architectural Design Tools
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 169-178
doi	https://doi.org/10.52842/conf.caadria.2015.169
summary	In this paper we examine the adaptations cellular automata (CA) are typically subjected to when they are applied to architectural designing. We argue that, despite a number of earlier studies that portrayed CA as generic generative design tools, the transition from generic CA to specific design tools is not yet well understood. To describe this transition, we first examine this aspect in a number of previous studies relating CA to architectural design. In a following detailed analysis of an applied design case study, we trace similarities between findings made in the literature review to findings made in the case study and extend them with additional observations. We conclude with a summary of challenges and opportunities met by architectural designers employing and developing CA for design purposes.
keywords	Cellular automata; generative design; design research; design tools.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ecaade2015_303
id	ecaade2015_303
authors	Coroado, Luís; Pedro, Tiago, D'Alpuim, Jorge, Eloy, Sara and Dias, MiguelSales
year	2015
title	VIARMODES: Visualization and Interaction in Immersive Virtual Reality for Architectural Design Process
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 125-134
doi	https://doi.org/10.52842/conf.ecaade.2015.1.125
wos	WOS:000372317300014
summary	The complexity of today´s architecture solutions brings the need to integrate, in the design process, digital tools for creation, visualization, representation and evaluation of design solutions. This paper proposes the adoption of a new Virtual Reality (VR) tool, referred to as VIARmodes, to support the architectural design process with an improved communication across different specialities, towards the facilitation of the project decision process. This tool allows a complete visualization of the design, specifically useful during the detailed design phase, including the architecture design and of other engineering specialities, progressively and interactively adapting the project visualization to the information needed for each discipline. With a set of 3 different visualization modes simulated in real scale within a Virtual Environment (VE), and adopting natural human-computer interaction by using speech, the system allows a team of architect and engineers, to visualize and interact with the proposed design during a collaborative design brief. We carried a usability evaluation study with 12 architects. The study showed that the tool was perceived to be effective and its use efficient during the design process, especially during the detailed design phase.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=4129cbae-70c8-11e5-be63-27454208986c
last changed	2022/06/07 07:56

_id	caadria2015_060
id	caadria2015_060
authors	Sun, Jaclyn K.; Geoff Kimm and Suleiman Alhadidi
year	2015
title	Generative Architecture in DLA Space
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 189-198
doi	https://doi.org/10.52842/conf.caadria.2015.189
summary	In the field of architectural design, Diffusion-limited aggregation (DLA) has been widely adopted in the study of macroscopic urban terrains and structures. If we consider individual habitats as having the same gene as our city, the intrinsic nature of DLA provides interesting insights in emulating local interactions that take place at microscopic level. This paper takes the dynamics of the DLA to the smallest unit of designable space. Whilst Phase I focuses mainly on Euclidean constraints, Phase II looks at how such generative space can add complexity to an open office plan by allowing different physical attributes to interact with one another based on the company’s organizational chart.
keywords	DLA; generative design; bottom-up design; design computation; cellular automata; fractal geometry
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ijac201513203
id	ijac201513203
authors	Velikov, Kathy; Geoffrey Thün, Mary O’Malley, and Lars Junghans
year	2015
title	Computational and Physical Modeling for Multi-Cellular Pneumatic Envelope Assemblies
source	International Journal of Architectural Computing vol. 13 - no. 2, 143-169
summary	This article describes recent research on the performative, formal and aesthetic potentials of multicellular pneumatic foil-based envelope systems for lightweight, responsive building skins able to control thermal insulation and air exchange with minimal amounts of energy and mechanical components. The prototype-based research involves the use of principles from biological examples of pneus, which inform the design of physical analogue models at an architectural scale. The process entails physical-computational feedback loops wherein physical performance findings are fed into computational design models for pneumatics and membranes, as well as modified energy models, in order to advance the predictive design capacities of simulation tools in designing such systems. In this process, material agency allies with computational agency to develop novel possibilities for dynamic pneumatic envelopes.
series	journal
last changed	2019/05/24 09:55

_id	caadria2018_016
id	caadria2018_016
authors	Zahedi, Ata and Petzold, Frank
year	2018
title	Utilization of Simulation Tools in Early Design Phases Through Adaptive Detailing Strategies
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 11-20
doi	https://doi.org/10.52842/conf.caadria.2018.2.011
summary	Decisions taken at early stages of building design have a significant effect on the planning steps for the entire lifetime of the project as well as the performance of the building throughout its lifecycle (MacLeamy 2004). Building Information Modelling (BIM) could bring forward and enhance the planning and decision-making processes by enabling the direct reuse of data hold by the model for diverse analysis and simulation tasks (Borrmann et al. 2015). The architect today besides a couple of simplified simulation tools almost exclusively uses his know-how for evaluating and comparing design variants in the early stages of design. This paper focuses on finding new ways to facilitate the use of analytical and simulation tools during the important early phases of conceptual building design, where the models are partially incomplete. The necessary enrichment and proper detailing of the design model could be achieved by means of dialogue-based interaction concepts with analytical and simulation tools through adaptive detailing strategies. This concept is explained using an example scenario for design process. A generic description of the aimed dialog-based interface to various simulation tools will also be discussed in this paper using an example scenario.
keywords	BIM; Early Design Stages; Adaptive Detailing ; Communication Protocols; Design Variants
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ecaade2015_280
id	ecaade2015_280
authors	Adilenidou, Yota
year	2015
title	Error as Optimization - Using Cellular Automata Systems to Introduce Bias in Aggregation Models through Multigrids
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 601-610
doi	https://doi.org/10.52842/conf.ecaade.2015.2.601
wos	WOS:000372316000067
summary	This paper is focusing on the idea of error as the origin of difference in form but also as the path and the necessity for optimization. It describes the use of Cellular Automata (CA) for a series of structural and formal elements, whose proliferation is guided through sets of differential grids (multigrids) and leads to the buildup of big span structures and edifices as, for example, a cathedral. Starting from the error as the main idea/tool for optimization, taxonomies of morphological errors occur and at a next step, they are informed with contextual elements to produce an architectural system. A toolbox is composed that can be implemented in different scales and environmental parameters, providing variation, optimization, complexity and detail density. Different sets of experiments were created starting from linear structural elements and continuing to space dividers and larger surface components.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=5cf73be0-6e8f-11e5-b7a4-1b188b87ef84
last changed	2022/06/07 07:54

_id	acadia19_168
id	acadia19_168
authors	Adilenidou, Yota; Ahmed, Zeeshan Yunus; Freek, Bos; Colletti, Marjan
year	2019
title	Unprintable Forms
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp.168-177
doi	https://doi.org/10.52842/conf.acadia.2019.168
summary	This paper presents a 3D Concrete Printing (3DCP) experiment at the full scale of virtualarchitectural bodies developed through a computational technique based on the use of Cellular Automata (CA). The theoretical concept behind this technique is the decoding of errors in form generation and the invention of a process that would recreate the errors as a response to optimization (Adilenidou 2015). The generative design process established a family of structural and formal elements whose proliferation is guided through sets of differential grids (multi-grids) leading to the build-up of large span structures and edifices, for example, a cathedral. This tooling system is capable of producing, with specific inputs, a large number of outcomes in different scales. However, the resulting virtual surfaces could be considered as "unprintable" either due to their need of extra support or due to the presence of many cavities in the surface topology. The above characteristics could be categorized as errors, malfunctions, or undesired details in the geometry of a form that would need to be eliminated to prepare it for printing. This research project attempts to transform these "fabrication imprecisions" through new 3DCP techniques into factors of robustness of the resulting structure. The process includes the elimination of the detail / "errors" of the surface and their later reinsertion as structural folds that would strengthen the assembly. Through this process, the tangible outputs achieved fulfill design and functional requirements without compromising their structural integrity due to the manufacturing constraints.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	cf2015_328
id	cf2015_328
authors	Gamez, Oscar; Bignon, Jean-Claude and Duchanois, Gilles
year	2015
title	Assisted construction of non-standard wooden walls and envelope structures by parametric modeling
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 328.
summary	We introduce a parametric modeling method in the field of computer-aided architectural conception, which aims to produce non-standard wooden walls and envelopes with CNC machinery. This method explores the application of polygonal cellular structures (as patterns) on facade and envelope interventions for new and old projects. We innovate by bringing the 3D production environment complexity into the conception model to improve the production of manifold woodworking items by CNC (Computer Numerical Control) 3D fabrication. A recent experimentation, tests the entire workflow from parametric modeling to production of two full-scale prototypes. The results prove the range of inputs offered by the method to be functional, though it needs various improvements in order to optimize parametric modeling and digital fabrication procedures. Future research will focus on treating a wider range of joints via parametric modeling and deal with joint creation regardless wall deformation to expand the morphological approach of non-standard wooden walls design.
keywords	Non-standard walls, Computer-aided architectural design, Wood construction, Parametric modeling, CNC fabrication, Mass customization.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	caadria2015_010
id	caadria2015_010
authors	Gámez, Oscar; Jean-Claude Bignon and Gilles Duchanois
year	2015
title	Assisted Construction of Non-Standard Wooden Walls and Envelope Structures by Parametric Modeling
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 653-662
doi	https://doi.org/10.52842/conf.caadria.2015.653
summary	The non-standard approach, widely discussed in the past years as Architecture progressively uses alternative design methods different from the Euclidean paradigm, has allowed architects to transform the way architecture is conceived and materialized. Such evolution uses computer-aided design along with automation in production to originate the environment for the aided architectural conception field in which we present a method, in its early development stage, intended to create non-standard walls and envelopes based on cellular patterns using wood as base material. We present the results obtained from modeling and building two full-scale prototypes of non-standard wooden walls.
keywords	Non-standard walls; parametric modeling; CNC fabrication; cellular structures; wood construction.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2015_099
id	caadria2015_099
authors	Park, Daekwon; Juhun Lee and Alejandra Romo
year	2015
title	Poisson's Ratio Material Distributions
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 735-744
doi	https://doi.org/10.52842/conf.caadria.2015.735
summary	The Poisson’s ratio of materials describes the ratio of the transverse to axial strain. While most materials exhibit non-negative Poisson ratio, here we focus on the topological properties of negative ratio materials also known as auxetic constructs. Digital modelling and physical fabrication are employed to generate and test experimental auxetic configurations. The first set of studies employ 2D space-filling tessellations integrating both negative and positive Poisson ratio cells. The tessellations are designed through binary state transitions and gradual morphing transitions. A second set of studies explores the topological optimization of a single negative Poisson cell configuration following the logic that a cell constitutes the building block of auxetic materials. The third set of studies focuses on the translation of heterogeneous Poisson ratio 2D tessellations into 3D constructs. Here, two methods of fabrication are explored: lamination method and cellular grading. The precision of the cellular grading method renders it particularly suitable for multi-material 3D printing fabrication which is theoretically studied and proposed. Space-filling heterogeneous tessellation studies are applied to architectural and product design proposals. These proposals exhibit properties that could serve to design and develop further research on real-world applications.
keywords	Optimization; cellular structure; negative Poisson’s ratio; auxetic material; material distribution.
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	ecaade2015_205
id	ecaade2015_205
authors	Patt, Trevor
year	2015
title	Generative Masterplanning Inspired by Cellular Automata with Context-specific Tessellation
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 461-466
doi	https://doi.org/10.52842/conf.ecaade.2015.2.461
wos	WOS:000372316000052
summary	Cellular automata offer a compelling model for complex generative design. However, the abstraction of classical cellular automata models hinders their application in the design process, particularly at small scales where regular grid matrices do not provide an adequate approximation. This paper presents some tests in appling these generative properties to a real site using irrregular tesselation adapted to the terrain and an spreadsheet interface that translate design concerns into set of neighborhood and state behaviors with the goal of generating massing diagrams for an urban masterplan. The development of the model over time is also presented as a visual reference that aids in comparing different parameter sets and informing the design process.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	ecaade2024_35
id	ecaade2024_35
authors	Agkathidis, Asterios; Song, Yang; Symeonidou, Ioanna
year	2024
title	AI-Assisted Design: Utilising artificial intelligence as a generative form-finding tool in architectural design studio teaching
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 2, pp. 619–628
doi	https://doi.org/10.52842/conf.ecaade.2024.2.619
summary	Artificial Intelligence (AI) tools are currently making a dynamic appearance in the architectural realm. Social media are being bombarded by word-to-image/image-to-image generated illustrations of fictive buildings generated by tools such as ‘Midjourney’, ‘DALL-E’, ‘Stable Diffusion’ and others. Architects appear to be fascinated by the rapidly generated and inspiring ‘designs’ while others criticise them as superficial and formalistic. In continuation to previous research on Generative Design, (Agkathidis, 2015), this paper aims to investigate whether there is an appropriate way to integrate these new technologies as a generative tool in the educational architectural design process. To answer this question, we developed a design workflow consisting of four phases and tested it for two semesters in an architectural design studio in parallel to other studio units using conventional design methods but working on the same site. The studio outputs were evaluated by guest critics, moderators and external examiners. Furthermore, the design framework was evaluated by the students through an anonymous survey. Our findings highlight the advantages and challenges of the utilisation of AI image synthesis tools in the educational design process of an architectural design approach.
keywords	AI, GAI, Generative Design, Design Education
series	eCAADe
email
last changed	2024/11/17 22:05

_id	ecaade2015_235
id	ecaade2015_235
authors	Ahmar, Salma El and Fioravanti, Antonio
year	2015
title	Biomimetic-Computational Design for Double Facades in Hot Climates - A Porous Folded Façade for Office Buildings
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 687-696
doi	https://doi.org/10.52842/conf.ecaade.2015.2.687
wos	WOS:000372316000076
summary	Biomimetic design is an approach that is gaining momentum among architects and designers. Computational design and performance simulation software represent powerful tools that help in applying biomimetic ideas in architectural design and in understanding how such proposals would behave. This paper addresses the challenge of reducing cooling loads while trying to maintain daylight needs of office buildings in hot climatic regions. Specifically, it focuses on double skin facades whose application in hot climates is somewhat controversial. Ideas from nature serve as inspiration in designing a porous, folded double façade for an existing building, aiming at increasing heat lost by convection in the façade cavity as well as reducing heat gained by radiation. The cooling loads and daylight autonomy of an office room are compared before and after the proposed design to evaluate its performance.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=f87306fc-6e90-11e5-845a-00190f04dc4c
last changed	2022/06/07 07:54

_id	caadria2015_090
id	caadria2015_090
authors	Altabtabai, Jawad and Wei Yan
year	2015
title	A User Interface for Parametric Architectural Design Reviews
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 65-74
doi	https://doi.org/10.52842/conf.caadria.2015.065
summary	Architectural form and performance are affected by the designer's graphical representation methods. Parametric CAD systems, as design and representation tools, have become ubiquitous in architectural practice and education. Literature in the area of parametric design reviews is scarce and focused within building inspection and construction coordination domains. Additionally, platforms marketed as design review tools lack basic functionality for conducting comprehensive, parametric, and performance-based reviews. We have developed a user interface prototype where geometric and non-geometric information of a Building Information Model were translated into an interactive gaming environment. The interface allows simultaneous occupation and simulation of spatial geometry, enabling the user to engage with object parameters, as well as, performance-based, perspectival, diagrammatic, and orthographic representations for total spatial and performance comprehension.
keywords	Design cognition; Virtual/augmented reality and interactive environments; Human-computer interaction.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2015_77
id	ecaade2015_77
authors	Bialkowski, Sebastian and Kepczynska-Walczak, Anetta
year	2015
title	Engineering Tools Applied in Architecture - Challenges of Topology Optimization Implementation
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 261-268
doi	https://doi.org/10.52842/conf.ecaade.2015.1.261
wos	WOS:000372317300028
summary	Computation, in the context of a digital designing process, is redefining architectural practice. Architects are developing new sets of tools which are dramatically changing the typical way of design procedure. The paper describes the research assumptions, problems and solutions proposition, aimed at creation of a real-time form finding tool for architects based on engineering methods. Through intersecting architectural form evaluation with engineering analysis and optimisation tools it is highly intended to offer the opportunity to variety of architects and designers to use the exceedingly complex and compound process for their design improvement. The form finding tool, to be effective and reliable, has to provide immediate feedback to a designer. This requirement enforces a software developer to use more sophisticated solutions. The paper focuses on possibilities of already known engineering procedures acceleration such as Finite Element Method or Topology Optimization for effective implementation in architectural design process.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=1337360e-702e-11e5-90b6-cbdace47c7fb
last changed	2022/06/07 07:52

_id	cf2015_397
id	cf2015_397
authors	Blonder, Arielle and Grobman, Yasha Jacob
year	2015
title	Alternative Fabrication Process for Free-Form FRP Architectural Elements Relying on Fabric Materiality Towards Freedom from Molds and Surface Articulation
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 397-410.
summary	FRP (fiber reinforced polymers) is a family of composite materials combining fibers and polymers to offer exceptional mechanical properties. Its unique material properties have led to its wide application across industries. Although we witness a growing interest in the material in the architectural field in recent years, a significant barrier to its application lies in the need for a mold. The paper describes a new alternative fabrication process for architectural FRP elements that relies on fabric materiality. It suggests a mold free process, combining form finding and garment making techniques, to allow for complex morphologies, surface articulation and variation. The paper describes both the fabrication process through physical experiments, as well as the design process through the use of two design software tools. It demonstrates the potential for sustainable variation of large component facade system.
keywords	FRP, Fabrication, Architecture, Mold, Materiality, Variation
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	caadria2017_155
id	caadria2017_155
authors	Cichocka, Judyta Maria, Browne, Will Neil and Rodriguez, Edgar
year	2017
title	Optimization in the Architectural Practice - An International Survey
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 387-396
doi	https://doi.org/10.52842/conf.caadria.2017.387
summary	For several years great effort has been devoted to the study of Architectural Design Optimization (ADO). However, although in the recent years ADO has attracted much attention from academia, optimization methods and tools have had a limited influence on the architectural profession. The aim of the study is to reveal users' expectations from the optimization tools and define limitations preventing wide-spread adaptation of the optimization solvers in the architectural practice. The paper presents the results of the survey "Optimization in the architectural practice" conducted between December 2015 and February 2016 on 165 architectural trainees and practising architects from 34 countries. The results show that there is a need for an interactive multi-objective optimization tool, as 78% respondents declared that a multi-objective optimization is more necessary in their practice than a single objective one and 91% of them acknowledged the need for choice of promising solutions during optimization process. Finally, it has been found that daylight, structure and geometry are three top factors which architects are interested in optimizing.
keywords	Architectural Design Optimization; Optimizaiton Techniques; Generic Solvers; Multi-criteria Decision Making
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaadesigradi2019_561
id	ecaadesigradi2019_561
authors	Cress, Kevan and Beesley, Philip
year	2019
title	Architectural Design in Open-Source Software - Developing MeasureIt-ARCH, an Open Source tool to create Dimensioned and Annotated Architectural drawings within the Blender 3D creation suite.
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 621-630
doi	https://doi.org/10.52842/conf.ecaade.2019.1.621
summary	MeasureIt-ARCH is A GNU GPL licensed, dimension, annotation, and drawing tool for use in the open source software Blender. By providing free and open tools for the reading and editing of architectural drawings, MeasurIt-ARCH allows works of architecture to be shared, read, and modified by anyone. The digitization of architectural practice over the last 3 decades has brought with it a new set of inter-disciplinary discourses for the profession. An attempt to utilise 'Open-Source' methodologies, co-opted from the world of software development, in order to make high quality design more affordable, participatory and responsible has emerged. The most prominent of these discussions are embodied in Carlo Raitti and Mathew Claudel's manifesto 'Open-Source Architecture' (Ratti 2015) and affordable housing initiatives like the Wikihouse project (Parvin 2016). MeasurIt-ARCH aims to be the first step towards creating a completely Open-Source design pipeline, by augmenting Blender to a level where it can be used produce small scale architectural works without the need for any proprietary software, serving as an exploratory critique on the user experience and implementations of industry standard dimensioning tools that exist on the market today.
keywords	Blender; Open-Source; Computer Aided Design ; OSArc
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	ijac201513206
id	ijac201513206
authors	Erhan, Halil; Ivy Y. Wang, and Naghmi Shireen
year	2015
title	Harnessing Design Space: A Similarity-Based Exploration Method for Generative Design
source	International Journal of Architectural Computing vol. 13 - no. 2, 217-236
summary	Working with multiple alternatives is a central activity in design; therefore, we expect computational systems to support such work. There is a need to find out the tool features supporting this central activity so that we can build new systems. To explore such features, we propose a method that aims to enable interaction with a large number of design alternatives by similaritybased exploration. Using existing data analysis and visualization techniques adopting similarity-based search, we formalized the method and its elements by focusing on systematic filtering, clustering, and choosing alternatives. We present a scenario on developing conceptual designs for a residential apartment to illustrate how the method can be applied, as well as to reveal the limitation of current tools and the potential interactive clustering and filtering features for the new systems coupled with parametric design.
series	journal
last changed	2019/05/24 09:55

_id	phd_MariadaPiedade_Ferreira
id	phd_MariadaPiedade_Ferreira
authors	Ferreira, Maria da Piedade
year	2015
title	Embodied Emotions: Observations and Experiments in Architecture and Corporeality
source	University of Lisbon
summary	This thesis is dedicated to the topic of the relationship between the Body and Architecture, in particular regarding the contemporary “embodied mind” theory. It includes a theoretical review on the topic based on the study of the different ways Architecture has followed the transformations that the views on the Body have endured throughout Western history, under the evolution and influence of different disciplines such as philosophy, technology, science, religion and art. Within this context, the thesis proposes a methodology based on performance arts, which explores the use of embodied practices in design education. Such a methodology aimed at testing how it is possible to influence users’ emotions using architectural space. The thesis argues that this can be achieved through a process of empathy between the users’ body and architectural space. To support this claim, the thesis presents a set of experiments undertaken in the context of architectural teaching. The results of such experiments were evaluated through the analysis of video and photo documentation, as well as through quantitative and qualitative data collected using emotion measurement tools and questionnaires, respectively.
keywords	Embodied Mind; Empathy; Performance Art
series	thesis:PhD
email
last changed	2017/10/17 11:33

For more results click below: