Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 565

Reformat results as: short short into frame detailed detailed into frame

_id	cf2015_203
id	cf2015_203
authors	Karakiewicz, Justyna ; Burry, Mark and Kvan,Thomas
year	2015
title	The next city and complex adaptive systems
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 203.
summary	Urban futures are typically conceptualized as starting anew; an urban future is usually represented as a quest for an ideal state, replacing the status quo with visionary statement about ‘better’ futures. Repeatedly, propositions reinvent the way we live, work and play. The major urban innovations for the changing cityscape from the last 100 years, however, have opportunistically taken advantage of unprecedented technical developments in infrastructure rather than be drawn from architectural inventions in their right, such as telecommunications, services, utilities, point-to-point rapid transit including the elevator. Howard’s Garden City therefore presaged the suburb, just as Le Corbusier et al proposed the erasure of significant sections of inner city Barcelona and Paris to replace them with the newly contrived towers; the city reformed as the significantly more mobile and dense ‘Ville Radieuse’. More recently Masdar emerged from virgin sand and Milton Keynes from pristine pasture, serving as counterpoints to the paradigm of erasure and rebuild. Despite all these advances in technology and science, little has changed in the paradigm of urban form; the choices we have today are largely restricted to the suburban house or the apartment in the tower. Should the “next city” offer an alternative vision for the future, and what new design processes are required to realize the next city?
keywords	Urban futures, Complex Adaptive Systems, parametric urbanism.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	ecaade2015_325
id	ecaade2015_325
authors	Lange, Christian J.
year	2015
title	Shanghai Lilong Tower Urbanism - Towards an Urbanism of Parametric Preservation
doi	https://doi.org/10.52842/conf.ecaade.2015.2.493
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 493-500
summary	This paper describes a design approach for a new urban building typology for Shanghai utilizing a set of parametric design techniques to arrive at an alternative solution to current models of urbanization. The goal in this approach was to find a solution that is adaptable and sensitive to the urban environment and has the capacity to preserve historic urban street patterns. The approach included an understanding of the historic urban fabric of Shanghai, a respective plot analysis and the development of a computational method to produce a new urban type. The parametric set-up was build upon an analytical workflow with integrated feedback procedures that informed the design exploration and resulted in multiple design solutions.
wos	WOS:000372316000056
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2015_333
id	ecaade2015_333
authors	Baerlecken, Daniel and Gokmen, Sabri
year	2015
title	Osteotectonics - Trabecular Bone Structures and Their Adaptation for Customized Structural Nodes Using Additive Manufacturing Techniques
doi	https://doi.org/10.52842/conf.ecaade.2015.2.439
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 439-448
summary	This paper discusses an approach to adapting trabecular bone structures for the design of complex architectural components exemplified through structural nodes. Based on the paradigm shift in additive fabrication, namely the ability to print structural metals, this paper identifies new methods for architectural and structural design that allow to create porous, intricate architectural components. Those components are designed in analogy to bone structures. The paper presents a metaball-based application, programmed in Processing, which allows creating n-legged nodes using parametric gradient maps. The approach aims at reduction of weight and waste, while exploring the novel aesthetic properties of such bio-constructed networks.
wos	WOS:000372316000050
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=b1066644-70d7-11e5-b019-7f01fe8cb7bc
last changed	2022/06/07 07:54

_id	cf2015_485
id	cf2015_485
authors	Anaf, Márcia and Harris, Ana Lúcia Nogueira de Camargo
year	2015
title	The geometry of Chuck Hoberman as the basis for the development of dynamic experimental structures
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 485.
summary	The cognitive-theoretical foundation referring to teach drawing as a way of thinking, as well as the construction of the environment by means of drawing using transforming geometries and the formal and para-formal computational process, creating unusual geometries through generative design processes and methodologies, can be seen as some of the main possibilities in exploring dynamic experimental structures for an Adaptive Architecture. This article presents the development of a model for articulated facades, inspired by Hoberman´s Tessellates, and his Adaptive Building Initiative (ABI) project to develop facades models that respond in real time to environmental changes. In addition, we describe an experiment based on the retractable structures, inspired by Hoberman´s work and experimentations. Solutions for responsive facades can offer more flexible architectural solutions providing better use of natural light and contributing to saving energy. Using Rhinoceros and the Grasshopper for modeling and test the responsiveness, the parametric model was created to simulate geometric panels of hexagonal grids that would open and close in reaction to translational motion effects, regulating the amount of light that reaches the building.
keywords	Parametric architecture, Hoberman´s Tessellates, Adaptive Building Initiative (ABI), Articulated Facades, Complex Geometries, Retractable structures, Retractable polyhedra.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	acadia15_357
id	acadia15_357
authors	Ashour, Yassin; Kolarevic, Branko
year	2015
title	Heuristic Optimization in Design
doi	https://doi.org/10.52842/conf.acadia.2015.357
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 357-369
summary	This paper presents a workflow called the ‘heuristic optimization workflow’ that integrates Octopus, a Multi-Objective Optimization (MOO) engine with Grasshopper3D, a parametric modeling tool, and multiple simulation software. It describes a process that enables the designer to integrate disparate domains via Octopus and complete a feedback loop with the developed interactive, real-time visualization tools. A retrospective design of the Bow Tower in Calgary is used as a test case to study the impact of the developed workflow and tools, as well as the impact of MOO on the performance of the solutions. The overall workflow makes MOO based results more accessible to designers and encourages a more interactive ‘heuristic’ exploration of various geometric and topological trajectories. The workflow also reduces design decision uncertainty and design cycle latency through the incorporation of a feedback loop between geometric models and their associated quantitative data. It is through the juxtaposition of extreme performing solutions that serendipity is created and the potential for better multiple performing solutions is increased.es responsive systems, which focus on the implementation of multi-objective adaptive design prototypes from sensored environments. The intention of the work is to investigate multi-objective criteria both as a material system and as a processing system by creating prototypes with structural integrity, where the thermal energy flow through the prototype, to be understood as a membrane, can be controlled and the visual transparency altered. The work shows performance based feedback systems and physical prototype models driven by information streaming, screening, and application.
keywords	Multi-Objective Optimization, Generative Design, Performance-Based Design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2015_100
id	ecaade2015_100
authors	Braumann, Johannes and Brell-Cokcan, Sigrid
year	2015
title	Adaptive Robot Control - New Parametric Workflows Directly from Design to KUKA Robots
doi	https://doi.org/10.52842/conf.ecaade.2015.2.243
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 243-250
summary	In the past years the creative industry has made great advancements in the area of robotics. Accessible robot simulation and control environments based on visual programming systems such as Grasshopper and Dynamo now allow even novice users to quickly and intuitively explore the potential of robotic fabrication, while expert users can use their programming knowledge to create complex, parametric robotic programs. The great advantage of using visual programming for robot control lies in the quick iterations that allow the user to change both geometry and toolpaths as well as machinic parameters and then simulate the results within a single environment. However, at the end of such an iterative optimization process the data is condensed into a robot control data file, which is then copied over to the robot and thus loses its parametric relationship with the code that generated it. In this research we present a newly developed system that allows a dynamic link between the robot and the controlling PC for parametrically adjusting robotic toolpaths and collecting feedback data from the robot itself - enabling entirely new approaches towards robotic fabrication by even more closely linking design and fabrication.
wos	WOS:000372316000029
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=9d9da7bc-70ef-11e5-b2fd-efbb508168fd
last changed	2022/06/07 07:54

_id	caadria2015_185
id	caadria2015_185
authors	De Oliveira, Maria João and Vasco Moreira Rato
year	2015
title	From Morphogenetic Data to Performative Behaviour
doi	https://doi.org/10.52842/conf.caadria.2015.765
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 765-774
summary	This paper presents part of CORK’EWS, a research work developed within the framework of the Digital Architecture Advanced Program 2012/13 at ISCTE-IUL. The main goal of this investigation was to develop a parametric, customizable and adaptive wall system designed for environmental performance. Moreover, the system is based on standard industrial products: expanded cork blocks produced by Amorim Insulation industries. CAD/CAM resources were the essential tools of the research process, where fundamental and practical knowledge is integrated to understand the microstructure morphological properties of the raw material – cork – and its derivate – natural expanded cork. These properties were upscale and adapted to create a wall with an optimized solar control environmental performance. The result is a digitally fabricated prototype of a new customizable industrial product, adaptable to specific environmental conditions and installation setups being therefore easily commercialized. From microstructural morphology to macroscale construction, the research explores new application possibilities through morphogenesis and opens new possible markets for these customizable products.
keywords	Morphogenesis; performance; shading systems; cork.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	cf2015_484
id	cf2015_484
authors	Liao, Kai; Vries, Bauke de; Kong, Jun and Zhang, Kang
year	2015
title	Pattern, cognition and spatial information processing: Representations of the spatial layout of architectural design with spatial-semantic analytics
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 484.
summary	In this paper, we review and extend the idea of Alexander’s “pattern language”, especially from the viewpoints of complexity theories, information systems, and human-computer interaction, to explore spatial cognition-based design representations for “intelligent and adaptive/interactive environment” in architecture and urban planning. We propose a theoretic framework of design patterns “with spatial information processing”, and attempt to incorporate state-of-the-art computational methods of information visualization/visual analytics into the conventional CAAD approaches. Focused on the spatial-semantic analytics, together with abstract syntactic pattern representation, by using “spatial-semantic aware” graph grammar formalization, i.e., Spatial Graph Grammars (SGG), the relevant models, algorithms and tool are proposed. We testify our theoretic framework and computational tool VEGGIE (a Visual Environment of Graph Grammar Induction Engineering) by using actual architectural design works (spatial layout exemplars of a small office building and the three house projects by Frank Lloyd Wright) as study cases, so as to demonstrate our proposed approach for practical applications. The results are discussed and further research is suggested.
keywords	Pattern language, complex adaptive systems, spatial cognition, design representations, spatial information processing, Artificial Intelligence, visual language, Spatial Graph Grammars (SGG), spatial-semantic analytics.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	sigradi2015_11.71
id	sigradi2015_11.71
authors	Medina, Viviana Hernaiz Diez de; Macruz, Andrea; Ginés, Pau
year	2015
title	Morphogenetic processes in architectonical design
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 637-641.
summary	This paper presents the relationship between morphogenetic concepts in nature and the creation of a generative system as a design process. This biomimetic approach generates an adaptive system that is able to respond to different parameters corresponding to the site where the membrane growths, contributing to the development of a new understanding of architecture in which the digital system and the performance of the material are reciprocal.
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	caadria2015_077
id	caadria2015_077
authors	Shiff, Galit; Yael Gilad and Amos Ophir
year	2015
title	Adaptive Polymer Based BIPV Skin
doi	https://doi.org/10.52842/conf.caadria.2015.345
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 345-354
summary	This study focuses on developing three-dimensional solar panels, as an alternative to traditional flat Photovoltaic (PV) surfaces in Building Integrated Photovoltaic (BIPV). We propose to increase the energy efficiency of buildings by using the entire envelope for energy production as well as by increasing the efficiency of solar energy output in orientations which were traditionally considered as non-ideal. The panels are constructed from Polycarbonate with integrated flexible photovoltaic film, solar paint or dye. The methodology included digital algorithm-based tools for achieving optimized variable three-dimensional surfaces according to local orientation and location, computational climatic simulations and comparative field tests. In addition, the structural, mechanical and thermal properties of the integration between flexible PV sheets and hard plastic curved panels were studied. Interim results demonstrate a potential improvement of 50-80% in energy production per building unit resulting from geometric variations per-se. The dependence of energy production by surface geometry was revealed and an optimized method for solar material distribution on the surface was proposed. A parametric digital tool for automatic generation of optimized three-dimensional panels was developed together with a database and material models of the optimized panels system.
keywords	Building Integrated Photovoltaics; digital algorithm; climatic simulations; building envelope
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2015_10.7
id	sigradi2015_10.7
authors	Alves, Gilfranco; Trujillo, Juliana
year	2015
title	Cybersemiotic Design: a methodological purpose for digital design teaching
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 488-492.
summary	The paper aims to relate a specific aspect of the proposed methodology for digital design, presented on the PhD research called Cibersemiótica e Processos de Projeto: Metodologia em Revis?o, developed at the University of S?o Paulo (USP), with the didactic experience conducted at the subject Representaç?o e Criaç?o Digital 2, developed at the Architecture and Urbanism Course of the Federal University of Campo Grande (UFMS), Brazil. The paper’s theoretical foundation is based on the cybersemiotic work produced by the Danish philosopher S?ren Brier, which unifies two important conceptual frameworks: the Charles Sanders Peirce’s Semiotics, and the Second Order Cybernetics proposed by Heinz von Foerster.
keywords	Education, Design Processes, Parametric Design, Cybersemiotics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2015_000
id	sigradi2015_000
authors	Cybis Perreira, Alice T.; Pupo, Regiane T. (Ed.)
year	2015
title	Project Information for Interaction
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0; vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015
summary	The chosen theme "Project Information for interaction" reveals one of the most important ways that technology has offered to improve the design process by integrating information into the elements of digital graphic in a parametric way. This integration allows many design professionals to interact on the same model, enabling simulations, materializations, revisions with data more close to the reality, avoiding errors and wastes. Projects with highest social responsibility can be performed by inserting this new way of designing in education and professional practices. So, this conference is dedicated to give time and space for presentations and discussions of researches and experiences in this area applied to the various fields such as Architecture, Urbanism, Design, Animation, Arts, among others. Looking into another perspective, this issue also brings the concept of Smart Cities, where the provision of information integrated with graphics inserted in the towns components (streets, open areas, buildings and objects), allow more responsible interactions, generating sustainable and collaborative actions among citizens.
series	SIGRADI
email
last changed	2016/03/10 09:50

_id	cf2017_111
id	cf2017_111
authors	Kepczynska-Walczak, Anetta; Pietrzak, Anna
year	2017
title	An Experimental Methodology for Urban Morphology Analysis
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, p. 111.
summary	The paper presents results of a research conducted in 2015 and 2016 at Lodz University of Technology. It proposes a purpose and context fit approach towards the automation of urban data generation based on GIS tools and New Urbanism typologies. First, background studies of methods applied in urban morphology analysis are revealed. Form-Based Code planning, and subsequently Transect-Based Code are taken into account. Then, selected examples from literature are described and discussed. Finally, the research study is presented and the outcomes compared with more traditional methodology.
keywords	GIS, Urban morphology, Spatial analysis, Decision support systems, Urban design, Data analytics, Modelling and simulation
series	CAAD Futures
email
last changed	2017/12/01 14:37

_id	sigradi2015_sp_11.303
id	sigradi2015_sp_11.303
authors	Lima, Isabel Cristina da Silva; Silva, Fernando Toledo; Maziviero, Maria Carolina
year	2015
title	Urbanism in the Digital Age: urban design and digital processes
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 832-835.
summary	The paper analyzes the theoretical and methodological approach of contemporary urban design associated to digital processes. This new approach to urban studies is based on parametric design systems in which the focus of interest is not in the form itself, but the parameters that generate it. As an alternative to traditional design system, this methodology provides greater control of the entire process, since the parameters can be changed during all stages of the work. Thus, this paper presents some cases to understand the advantages and disadvantages of using this new way of designing on urban scale.
keywords	Urban Projects, Digital Thought, Inventory, Generative Systems, Design Process
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	acadia15_513
id	acadia15_513
authors	Sanchez, Jose
year	2015
title	Temporal and Spatial Combinatorics in Games for Design
doi	https://doi.org/10.52842/conf.acadia.2015.513
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 513-523
summary	This paper will outline the techniques and language that games use to give design agency to a player. By identifying the discrete combinatorial ontology of games, as opposed to a continuous post-rationalistic approach from general design tools, we hope to develop a framework for the design of ‘games for design’, or sandboxes that allow players to develop an output that is unexpected to the game developer and contingent to a player. This research has been the foundation for the development of Block’hood, a city-building video game that explores ideas of ecology and generative urbanism.
keywords	Combinatorics, city building game, game design, crowd-sourcing, ecology, learning, educational software
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	eaea2015_t2_paper01
id	eaea2015_t2_paper01
authors	Siret, Daniel
year	2015
title	Perception of the Past Understanding Past Sensibility to Grasp Present Architecture: the Example of Solar Radiation
source	ENVISIONING ARCHITECTURE: IMAGE, PERCEPTION AND COMMUNICATION OF HERITAGE [ISBN 978-83-7283-681-6],Lodz University of Technology, 23-26 September 2015, pp.125-131
summary	The presented research questions the place and role of sensitivity to direct solar radiation in architecture and urbanism past and present. Our main hypothesis is that the relation which societies entertain with solar radiation is a cultural fact which directly influences their symbolic, social and material production, in particular the way they design the architectural and urban environments which they inhabit. In proposing a cultural approach to architecture and urbanism in the sun over time, we aim to show how the built environment reflects and organizes at one and the same time our individual and social relation to solar radiation.
keywords	solar radiation; architecture; cultural history
series	EAEA
email
last changed	2016/04/22 11:52

_id	sigradi2015_3.201
id	sigradi2015_3.201
authors	Sperling, David M.; Vandier, Inácio; Scheeren, Rodrigo
year	2015
title	Feeling the space: design with tactile models
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 108-112.
summary	The article presents the pedagogical experience of the elective course “Feel the space: design with tactile models” held at the Institute of Architecture and Urbanism of USP / S?o Carlos in 2014. From the critique of the primacy of seeing, the experimental activity proposed a housing design process with a visually impaired person, using models, plants and tactile maps. Were investigated and compared the free use of materials and processes with the use of digital fabrication - MDF plates manufactured with a laser cutting machine. As a result, it is presented the tactile representation system developed in the activity.
keywords	Design, Perception, Representation, Tactile Models, Digital Fabrication
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	sigradi2015_10.144
id	sigradi2015_10.144
authors	Tramontano, Marcelo
year	2015
title	When research and teaching connect: Parametric design, digital fabrication and architectural design
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 544-550.
summary	This article focuses on three aspects of the use of parametric computer programs in architectural design teaching: 1. the design of buildings with complex geometries; 2. the continuous production of physical models as an indissociable part of the design process; 3. the formulation of exercises seeking to explore the potential of programs and the ways of designing and building they imply. It relies on the didactic experience of a mandatory course of Architectural Design at the Institute of Architecture and Urbanism of the University of Sao Paulo, Brazil, in connection with the studies and experiments on parametric design and digital fabrication of Nomads.usp, the Center for Interactive Living Studies.
keywords	Parametric Design, Digital Fabrication, Architectural Design, Architectural Design Teaching, Physical Models
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	sigradi2015_sp_1.236
id	sigradi2015_sp_1.236
authors	Vilela, Jo?o Paulo; Lima, Fernando; Zancaneli, Mariana
year	2015
title	Reflections about environmental simulation and BIM: A pedagogical approach in Architecture and Urbanism
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 756-760.
summary	This article aims to contribute to a better understanding of the importance of addressing computer tools in environmental comfort simulations to design tasks, as well as to promote debate about the use of simulative software technologies in student training process. The goal is to discuss about how these tools can assist in students’ training, in order to support all design stages, especially those related to technological systems and energy efficiency of buildings. The obtained results made possible to discuss about how these software can help students in design processes to improve building characteristics, bringing better architectural solutions.
keywords	Simulation, Design Process, Energy Ef ciency, Student Training
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	cf2015_279
id	cf2015_279
authors	Abdelmohsen, Sherif M. and Massoud, Passaint M.
year	2015
title	Making Sense of those Batteries and Wires: Parametric Design between Emergence and Autonomy
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 279-296.
summary	This paper reports on the process and outcomes of a digital design studio that integrates parametric design and generative systems in architectural and urban design projects. It explores the interrelationship between the emergence of innovative formal representations using parametric design systems on the one hand, and design autonomy; more specifically the conscious process of generating and developing an architectural concept, on the other. Groups of undergraduate students working on an architectural project are asked to identify a specific conceptual parti that addresses an aspect of architectural quality, define strategies that satisfy those aspects, and computational methodologies to implement those strategies, such as rule-based systems, self-organization systems, and genetic algorithms. The paper describes the educational approach and studio outcomes, discusses implications for CAAD education and curricula, and addresses issues to be considered for parametric and generative software development.
keywords	Parametric modeling, generative design, emergence, autonomy, design exploration, CAAD curriculum.
series	CAAD Futures
email
last changed	2015/06/29 07:55

For more results click below: