Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 588

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2015_240
id	ecaade2015_240
authors	Sousa, Jose Pedro; Varela, Pedro Azambuja and Martins, Pedro Filipe
year	2015
title	Between Manual and Robotic Approaches to Brick Construction in Architecture
doi	https://doi.org/10.52842/conf.ecaade.2015.2.361
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 361-370
summary	Brick construction has a long and rich structural and aesthetic traditions in architecture, which can be traced back to the origins of our civilization. However, despite the remarkable works of Frank Lloyd Wright, Louis Kahn, Eladio Dieste or Alvar Aalto in the 20th century, the application of this construction process to address more irregular geometries is very difficult to be achieved by conventional manual means. In this context, the last decade assisted to emergence of robotic applications in architecture. While Gramazio & Kohler looked for solving non-standard brick structures, others, like the S.A.M. robot initiative, are interested in improving the productivity in the fabrication of regular brick structures. By surveying the recent advances on bricklaying automation, this paper is interested in reflecting on the actual role of manual brickwork. In doing so, the authors present the Brick Tower experiment developed at the DFL/CEAU/FAUP, where two different fabrications processes are critically compared: a robotic and a manual one, which is aided by a video projection technique. By describing and illustrating this experiment, the authors argue that it is possible to expand the traditional craft of bricklaying by devising simple strategies to increase the human capacity to understand and materialize more elaborated geometries. This research avenue can be relevant if one considers that manual work should remain the most common form of brickwork practice in the next decades.
wos	WOS:000372316000042
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=e6bc50e2-6fe6-11e5-9a3c-4332809e7acb
last changed	2022/06/07 07:56

_id	sigradi2015_13.316
id	sigradi2015_13.316
authors	Ariza, Inés; Gazit, Merav
year	2015
title	On-site Robotic Assembly of Double-curved Self-supporting Structures
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 746-753.
summary	Robotic assembly of architectural structures has been an area of research for a few decades. Yet, current methods impose a large number of constraints on the geometry of those structures. In this paper we introduce a method for robotic assembly that enables the construction of double curved self-supporting structures. Latest research challenges have focused on the assembly of sophisticated brick structures and on sensor feedback systems for handling accuracy. We propose an alternative strategy to tackle tolerance handling in complex structures that rely on geometry. The intelligence of the system lies in two main aspects: a subdivision technique that incorporates the robot’s constraints as well as the structural equilibrium of the structure during each step of assembly, in order to omit the use of scaffolding; and a match between geometric information and the robot’s movements in a robot programming environment. As a proof of concept, we fabricated a portion of a full-scale double-curved structure. The structure was assembled without scaffolding by a portable KUKA KR10 on a randomly picked site. This project aims to demonstrate an easy and simple method for robotic assembly that enables the realization of digitally generated complex geometries as concrete complex structures.
keywords	Robotic Assembly, Self-supporting Structure, On-site Assembly, Double Curvature, Construction Tolerances
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2015_247
id	ecaade2015_247
authors	Garcia, Manuel Jimenez and Retsin, Gilles
year	2015
title	Design Methods for Large Scale Printing
doi	https://doi.org/10.52842/conf.ecaade.2015.2.331
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 331-339
summary	With an exponential increase in the possibilities of computation and computer-controlled fabrication, high density information is becoming a reality in digital design and architecture. However, construction methods and industrial fabrication processes have not yet been reshaped to accommodate the recent changes in those disciplines. Although it is possible to build up complex simulations with millions of particles, the simulation is often disconnected from the actual fabrication process. Our research proposes a bridge between both stages, where one drives the other, producing a smooth transition from design to production. A particle in the digital domain becomes a drop of material in the construction method.The architect's medium of expression has become much more than a representational tool in the last century, and more recently it has evolved even beyond a series of rules to drive from design to production. The design system is the instruction itself; embedding structure, material and tectonics and gets delivered to the very end of the construction chain, where it gets materialised. The research showcased in this paper investigates tectonic systems associated with large scale 3D printing and additive manufacturing methods, inheriting both material properties and fabrication constraints at all stages from design to production. Computational models and custom design software packages are designed and developed as strategies to organise material in space in response to specific structural and logistical input.Although the research has developed a wide spectrum of 3D printing methods, this paper focuses only on two of the most recent projects, where different material and computational logics were investigated. The first, titled Filamentrics, intends to develop free-form space frames, overcoming their homogeneity by introducing robotic plastic extrusion. Through the use of custom made extruders a vast range of high resolution prototypes were developed, evolving the design process towards the fabrication of precise structures that can be materialised using additive manufacturing but without the use of a layered 3D printing method. Instead, material limitations were studied and embedded in custom algorithms that allow depositing material in the air for internal connectivity. The final result is a 3x2x2.5m structure that demonstrates the viability of this construction method for being implemented in more industrial scenarios.While Filamentrics is reshaping the way we could design and build light weight structures, the second project Microstrata aims to establish new construction methods for compression based materials. A layering 3D printing method combines both the deposition of the binder and the distribution of an interconnected network of capillaries. These capillaries are organised following structural principles, configuring a series of channels which are left empty within the mass. In a second stage aluminium is cast in this hollow space to build a continuous tension reinforcement.
wos	WOS:000372316000039
series	eCAADe
type	normal paper
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=07a6d8e0-6fe7-11e5-9994-cb14cd908012
last changed	2022/06/07 07:51

_id	ecaade2016_043
id	ecaade2016_043
authors	Wit, Andrew and Kim, Simon
year	2016
title	rolyPOLY - A Hybrid Prototype for Digital Techniques and Analog Craft in Architecture
doi	https://doi.org/10.52842/conf.ecaade.2016.1.631
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 631-638
summary	The rapid emergence of computational design tools, advanced material systems and robotic fabrication within the disciplines of architecture and construction has granted designers immense freedom in form and assembly, while retaining pronounced control over output quality throughout the entirety of the design and fabrication process. Simultaneously, the complexity inherent within these tools and processes can lead to a loss of craft though the production of methodologies, forms and artifacts left with extremely recognizable residues from tooling processes utilized during their production. This paper investigates the fecund intersection of digital technologies and handcraft through core-less carbon fiber reinforced polymer (CFRP) winding as a means of creating a new typology of digital craft blurring the line between human and machine. Through the lens of an innovative wound CFRP shelter rolyPOLY completed during the winter of 2015, this paper will show the exigencies and affordances between the realms of digital and analog methodologies of CFRP winding on large-scale structures.
wos	WOS:000402063700068
keywords	additive manufacturing; composites; form finding; craft; analog / digital
series	eCAADe
email
last changed	2022/06/07 07:57

_id	acadia23_v1_220
id	acadia23_v1_220
authors	Ruan, Daniel; Adel, Arash
year	2023
title	Robotic Fabrication of Nail Laminated Timber: A Case Study Exhibition
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 220-225.
summary	Previous research projects (Adel, Agustynowicz, and Wehrle 2021; Adel Ahmadian 2020; Craney and Adel 2020; Adel et al. 2018; Apolinarska et al. 2016; Helm et al. 2017; Willmann et al. 2015; Oesterle 2009) have explored the use of comprehensive digital design-to-fabrication workflows for the construction of nonstandard timber structures employing robotic assembly technologies. More recently, the Robotically Fabricated Structure (RFS), a bespoke outdoor timber pavilion, demonstrated the potential for highly articulated timber architecture using short timber elements and human-robot collaborative assembly (HRCA) (Adel 2022). In the developed HRCA process, a human operator and a human fabricator work alongside industrial robotic arms in a shared working environment, enabling collaborative fabrication approaches. Building upon this research, we present an exploration adapting HRCA to nail-laminated timber (NLT) fabrication, demonstrated through a case study exhibition (Figures 1 and 2).
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	acadia15_161
id	acadia15_161
authors	Baharlou, Ehsan; Menges, Achim
year	2015
title	Toward a Behavioral Design System: An Agent-Based Approach for Polygonal Surfaces Structures
doi	https://doi.org/10.52842/conf.acadia.2015.161
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 161-172
summary	The following research investigates the development of an agent-based design method as an integrative design tool for polygonal surface structures. The aim of this research is to develop a computational tool that self-organizes the emergence of polygonal surface structures from interaction between its constitutive lattices. This research focuses on the ethological level of morphogenesis that is relevant to the animal or insect societies, whereby agents mediate the material organizations with environmental aspects. Meanwhile, behavior-based approaches are investigated as a bottom-up system to develop a computational framework in which the lower-level features constantly interact. The lower-level features such as material properties (e.g., geometric descriptions) are abstracted into building blocks or agents to construct the agent’s morphology. The abstracted principles, which define the agent’s morphology, are aggregated into a generative tool to explore the emergent complexities. This exploration coupled with the generative constraint mechanisms steers the collective agents system toward the cloud of solutions; hence, the collective behaviors of agents constitute the polygonal surface structures. This polygonal system is a bottom up approach of developing the complex surface that emerges through topological and topographical interaction between cells and their surrounding environment. Subsequently, the integrative system is developed through agent-based parametric modelling, in which the knowledge-based system as a top-down approach is substituted with the agent system together with its morphological features and significant behaviors.
keywords	Agent-Based System, Behavioral-Based System, Polygonal Surface Structures, Self-Organization and Emergence
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2015_293
id	ecaade2015_293
authors	Batliner, Curime; Newsum, MichaelJake and Rehm, M.Casey
year	2015
title	Live: Synchronous Computing in Robot Driven Design
doi	https://doi.org/10.52842/conf.ecaade.2015.2.277
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 277-286
summary	Challenging our contemporary understanding of representation and simulation in architecture SCI-Arc has been developing a unique digital/physical design platform where the relationships between humans, machines and matter are constantly in flux re-calibrating, reshuffling, reordering aligning digital and physical and vis versa. The robot as a technology takes an important role in these new ideation environments. “Live” is an applicaton which enables real-time robotic control and grants the robot substantial agency situating it as an interactive design tool that immediately responds to designed signal and sensor inputs in its environment. Current research explores interactive environments, gesture based human-machine interactions and autonomous agent driven design programs.
wos	WOS:000372316000033
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=6fff29ba-6fe7-11e5-a661-eb66006fc007
last changed	2022/06/07 07:54

_id	sigradi2018_1359
id	sigradi2018_1359
authors	Bertola Duarte, Rovenir; Ziger Dalgallo, Ayla; Consalter Diniz, Maria Luisa; Romão Magoga, Thais
year	2018
title	A window to the autism: the political role of the difference of an objectile in the homogeneous school
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 848-853
summary	This paper approaches the insertion of an objectile in the homogeneous space of a school, looking to bring flexibility and responsiveness to assist a user with Autism Spectrum Disorder (ASD). The research concerns with photosensitivity, a problem faced by almost 25% of the children with autism (Miller-Horn; Spence; Takeoka, 2011). The study is based on the theories for ASD environments that speak of ‘sensorial perception’ and ‘thinking with imagery’ (Mostafa, 2008), and the coexistence of Sensory Design Theory and Neuro-Typical Method (Pomana, 2015). The result consists of a gadget developed in MIT App Inventor tool and a curtain that interact responsively through an Arduino code, for a new connection between the user and his surroundings.
keywords	Objectile; Responsive Architecture; Architecture and autism; ASD; Inclusive school
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2015_100
id	ecaade2015_100
authors	Braumann, Johannes and Brell-Cokcan, Sigrid
year	2015
title	Adaptive Robot Control - New Parametric Workflows Directly from Design to KUKA Robots
doi	https://doi.org/10.52842/conf.ecaade.2015.2.243
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 243-250
summary	In the past years the creative industry has made great advancements in the area of robotics. Accessible robot simulation and control environments based on visual programming systems such as Grasshopper and Dynamo now allow even novice users to quickly and intuitively explore the potential of robotic fabrication, while expert users can use their programming knowledge to create complex, parametric robotic programs. The great advantage of using visual programming for robot control lies in the quick iterations that allow the user to change both geometry and toolpaths as well as machinic parameters and then simulate the results within a single environment. However, at the end of such an iterative optimization process the data is condensed into a robot control data file, which is then copied over to the robot and thus loses its parametric relationship with the code that generated it. In this research we present a newly developed system that allows a dynamic link between the robot and the controlling PC for parametrically adjusting robotic toolpaths and collecting feedback data from the robot itself - enabling entirely new approaches towards robotic fabrication by even more closely linking design and fabrication.
wos	WOS:000372316000029
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=9d9da7bc-70ef-11e5-b2fd-efbb508168fd
last changed	2022/06/07 07:54

_id	caadria2015_030
id	caadria2015_030
authors	Daas, Mahesh and Andrew Wit
year	2015
title	Pedagogy of Architectural Robotics
doi	https://doi.org/10.52842/conf.caadria.2015.003
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 3-12
summary	As computation and robotics become more prevalent in all aspects of architecture, their impact on education assumes greater importance. The paper presents the outcomes of a collaborative undergraduate architectural design studio that investigates the realms of architectural robotics and computation by stepping into the fecund intersections between multiple disciplines. The pedagogical prototype, Unsolicited: An Inconvenient Studio, broadly focused on the topics of robotics and responsive architectures. The notion of robotics was interpreted to include a range of robotic technologies and their formal manifestations in the form of biomorphic, mechanomorphic, polymorphic, and amorphic robots, and interactive architecture. Taught using a recently developed framework that focuses on self-organizing systems and the creation of innovative technology-driven design entrepreneurs rather than merely on the creation of designed artefacts, students found themselves not only innovating with new digital technologies but also bridging architecture, urbanism and computer science. The paper describes the pedagogy, processes, and outcomes of the studio.
keywords	Robotics; interactive architecture; pedagogy; innovation; studio.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2015_48
id	ecaade2015_48
authors	Edemskaya, Elizaveta and Agkathidis, Asterios
year	2015
title	Vladimir Shukhov - A Critical Review on Digital Architecture
doi	https://doi.org/10.52842/conf.ecaade.2015.1.395
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 395-402
summary	This paper is a critical review on advantages and disadvantages of contemporary digital architecture, in retrospect to Vladimir Shukhov's design techniques, applied in the early 20th century. After investigating Shukhov's structural systems, this paper explores the relationship between performance and form, questioning the necessity of high-complexity structures. It will present unpublished archive material of his early work and stimulate a valuable discussion by comparing it with contemporary projects designed by renowned architects. The study on Shukhov focuses on his tessellation method of double-curved surfaces using simple standardized elements. The study of present digital approaches revolves around leading architects using computational tools (e.g. Foster and Partners, Buro Happold and Arup), who have materialized high complexity structures composed by irregular units. Our findings highlight advantages and disadvantages of contemporary computational approaches.
wos	WOS:000372317300043
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=bbc13038-7022-11e5-936a-d7a776e5d67a
last changed	2022/06/07 07:55

_id	ecaade2015_118
id	ecaade2015_118
authors	Ferreira, Bruno and Leitão, António
year	2015
title	Generative Design for Building Information Modeling
doi	https://doi.org/10.52842/conf.ecaade.2015.1.635
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 635-644
summary	Generative Design (GD) is a programming-based approach for Architecture that is becoming increasingly popular amongst architects. However, most Generative Design approaches were thought for traditional Computer Aided Design (CAD) tools and are not adequate for the Building Information Modeling (BIM) paradigm. This paper proposes a solution that extends GD to be used with BIM applications while preserving and taking advantage of its ideas. The solution will be evaluated by developing a connection between Revit, a well-known BIM tool, and Rosetta, a programming environment for GD, and by implementing the necessary programming language features that allows GD to be used in the context of BIM tool.
wos	WOS:000372317300069
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=cba54e6e-7025-11e5-81ea-00190f04dc4c
last changed	2022/06/07 07:50

_id	acadia19_234
id	acadia19_234
authors	Grewal, Neil; Escallon, Miguel; Chaudhary, Abhinav; Hramyka, Alina
year	2019
title	INFRASONIC
doi	https://doi.org/10.52842/conf.acadia.2019.234
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 234-245
summary	In 2015, an earthquake of 7.8 magnitude displaced over 6.6 million people in Kathmandu, Nepal. Three years later, the country continues in its struggle to rebuild its capital. The aim of this study is to investigate a construction system, produced from locally sourced materials, that can aggregate and deploy as self-built, habitable infrastructure. The study focused on the relationship between material resonance, earthquake resistant structures, and fabrication strategies. An agent-based form-finding algorithm was developed using knowledge acquired through physical prototyping of mycelium-based composites to generate earthquake resistant geometries, optimize material usage, and enhance spatial performance. The results show compelling evidence for a construction methodology to design and construct a 3-4 story building that holds a higher degree of resistance to earthquakes. The scope of work contributes to advancements in bioengineering, confirming easy-to-grow, light-weight mycelium-composites as viable structural materials for construction.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	ecaade2015_265
id	ecaade2015_265
authors	Hosey, Shannon; Beorkrem, Christopher, Damiano, Ashley, Lopez, Rafael and McCall, Marlena
year	2015
title	Digital Design for Disassembly
doi	https://doi.org/10.52842/conf.ecaade.2015.2.371
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 371-382
summary	The construction and building sector is now widely known to be one of the biggest energy consumers, carbon emitters, and creators of waste. Some architectural agendas for sustainability focus on energy efficiency of buildings that minimize their energy intake during their lifetime - through the use of more efficient mechanical systems or more insulative wall systems. One issue with these sustainability models is that they often ignore the hierarchy of energy within architectural design. The focus on the efficiency is but one aspect or system of the building assembly, when compared to the effectiveness of the whole, which often leads to ad-hoc ecology and results in the all too familiar “law of unintended consequences” (Merton, 1936). As soon as adhesive is used to connect two materials, a piece of trash is created. If designers treat material as energy, and want to use energy responsibly, they can prolong the lifetime of building material by designing for disassembly. By changing the nature of the physical relationship between materials, buildings can be reconfigured and repurposed all the while keeping materials out of a landfill. The use of smart joinery to create building assemblies which can be disassembled, has a milieu of new possibilities created through the use of digital manufacturing equipment. These tools afford designers and manufacturers the ability to create individual joints of a variety of types, which perform as well or better than conventional systems. The concept of design for disassembly is a recognizable goal of industrial design and manufacturing, but for Architecture it remains a novel approach. A classic example is Kieran Timberlake's Loblolly House, which employed material assemblies “that are detailed for on-site assembly as well as future disassembly and redeployment” (Flat, Inc, 2008). The use of nearly ubiquitous digital manufacturing tools helps designers create highly functional, precise and effective methods of connection which afford a building to be taken apart and reused or reassembled into alternative configurations or for alternative uses. This paper will survey alternative energy strategies made available through joinery using digital manufacturing and design methods, and will evaluate these strategies in their ability to create diassemblable materials which therefore use less energy - or minimize the entropy of energy over the life-cycle of the material.
wos	WOS:000372316000043
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=4075520a-6fe7-11e5-bcc8-f7d564ea25ed
last changed	2022/06/07 07:50

_id	cf2015_211
id	cf2015_211
authors	Hu, Yongheng
year	2015
title	The Computation Turn in Structural Performance Based Architecture Design
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 211-225.
summary	It is necessary for an architect to engage closely with structural design, to interpret their design idea thoroughly, and it requires carefully collaboration between architect and engineer. The structural performance based design is not only to obey structure principle but to explore different possibilities of engineer and architectural innovation. Architects could apply this method in the earlier stage of design, and it could provide the efficient solution for structure, create a new spatial experience and further improve the construction quality in the later phase of development. In comparison to structural performance-based design in history, the computational technology has made it possible for architects to implement further the structural knowledge in more dynamic and sophisticated environment. This paper will discuss the history development and current transformation of this method. Three research project will explain the current experimental design process and back the idea of this method.
keywords	Performance Based Architecture design, Computational Design, Structural Optimization
series	CAAD Futures
type	normal paper
email
last changed	2015/07/28 20:41

_id	ecaade2015_307
id	ecaade2015_307
authors	Kallegias, Alexandros and Erdine, Elif
year	2015
title	Design by Nature: Concrete Infiltrations
doi	https://doi.org/10.52842/conf.ecaade.2015.2.513
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 513-520
summary	The paper aims to address methods of realizing computationally generated self-organizing systems on a one-to-one scale with the employment of a singular material system. The case study described in this paper is the outcome of an investigation which has explored earth scaffolding, fabric form-work, and concrete materiality during an international three-week architecture workshop. Real-time generative form-finding methods based on branching and bundling systems in nature have been developed and simulated in an open-source programming environment. The outcome of the simulation stage has been analyzed structurally via Finite Element Analysis (FEA), results of which have served as inputs for the fine-tuning of the simulation. Final three-dimensional geometry has been fabricated by employing fabric, essentially forming the fabric form-work. Fabric form-work is then laid on top of the earth scaffolding, followed by the process of concrete casting. From a pedagogical point of view, the research focuses on the integration of digital design techniques between various design/architecture/analysis platforms combined with basic and advanced techniques of construction within a limited time frame.abstract here by clicking this paragraph.
wos	WOS:000372316000058
series	eCAADe
email
last changed	2022/06/07 07:52

_id	acadia15_333
id	acadia15_333
authors	Koltick, Nicole
year	2015
title	Autonomous Botanist: the Poetic Potentials of a New Robotic Species
doi	https://doi.org/10.52842/conf.acadia.2015.333
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 333-341
summary	This project begins by asking questions about ethics and empathy towards robots, and contemplates the future of their behavior in ways not informed by pragmatics or economy. What if a robot had a hobby? How do robots make aesthetic decisions? What is a robot’s point of view? It seeks to shift perception of robotic agency and allow the audience to embody the robotic gardeners’ vision, behavior and influence its aesthetics. By amplifying perceptual differences between humans and robots and we allow for both tangible and virtual embodiment experiences from multiple scales and perspectives.
keywords	Non-anthropocentric aesthetics, speculative realism, robotics, synthetic ecologies
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	caadria2015_014
id	caadria2015_014
authors	Lee, Ju Hyun; Michael J. Ostwald and Ning Gu
year	2015
title	Multi-Cultural Design Communication
doi	https://doi.org/10.52842/conf.caadria.2015.531
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 531-540
summary	The paper examines a method combining cognitive and linguistic approaches to investigate design protocols. The method is applied in a pilot study to compare Australian and Swedish language protocols recorded in an experiment using a parametric design environment. The results demonstrate that the coding schemes can formally capture both cognitive and linguistic characteristics of the design process. This multi-focused approach directly contributes to a better understanding of the relationship between design and language.
keywords	Design cognition; Language; Spatial language; Parametric design; Protocol analysis.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2015_206
id	ecaade2015_206
authors	Luyten, Laurens
year	2015
title	CAAD and Conceptual Design Collaboration between Architects and Structural Engineers
doi	https://doi.org/10.52842/conf.ecaade.2015.2.215
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 215-224
summary	Architectural design benefits from a design collaboration between architect and engineers that starts early in the design process. This paper presents a proposal for a new structural language developed to support an early design collaboration between architect and structural engineer. This language expresses the essential characteristics of the conceptual design of the structural engineer, and requires a limited amount of structural engineering knowledge for the architect to comprehend. The language is evaluated in different case studies with architecture and interior architecture students: they show the students' appreciation as it is found easy to learn and use, and a helpful tool in conceptual design collaboration with a structural engineer. Although the language is developed for manual 3D sketching, the paper briefly indicates its potentials for digital 3D representations and more intelligent CAAD like Multi-Agent System (MAS).
wos	WOS:000372316000026
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=3d3e3cd0-6fe9-11e5-a486-00190f04dc4c
last changed	2022/06/07 07:51

_id	ecaade2015_109
id	ecaade2015_109
authors	Markusiewicz, Jacek, Strzala, Marcin and Koszewski, Krzysztof
year	2015
title	Modular Light Cloud. Design, Programming and Making - Towards the Integration of Creative Actions
doi	https://doi.org/10.52842/conf.ecaade.2015.2.091
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 91-101
summary	Modular Light Cloud is an installation that is conceived to explore the boundaries of architecture and art. Its interactivity is a metaphor of mutual influences that derive from activities performed in space - associated with motion, sound and light.It is an experimental project focused on the integration of architectural elements, structure, information technology, performing arts, electronics and digital fabrication in architectural education.The project was completed in a two-week student workshop in collaboration with a contemporary dance artist. The students were taught the basics of parametric design, programming of electronic components and digital fabrication during tutorial classes. The making process combined three stages of development: design, construction and programming of interaction.The final form consists of two irregular spatial trusses made of aluminum profiles connected with 3d printed nodes. The profiles are equipped with LED strips and electronic components: light sensors, sound and communication between them. These systems control the intensity of light emitted by the diodes based on the inputs.The result is a working prototype presented as interactive installation featuring contemporary dance artist. It was displayed at art festivals and other events.
wos	WOS:000372316000012
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=e17b2300-6f83-11e5-836f-4becdc2939a0
last changed	2022/06/07 07:59

For more results click below: