Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 584

Reformat results as: short short into frame detailed detailed into frame

_id	acadia15_161
id	acadia15_161
authors	Baharlou, Ehsan; Menges, Achim
year	2015
title	Toward a Behavioral Design System: An Agent-Based Approach for Polygonal Surfaces Structures
doi	https://doi.org/10.52842/conf.acadia.2015.161
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 161-172
summary	The following research investigates the development of an agent-based design method as an integrative design tool for polygonal surface structures. The aim of this research is to develop a computational tool that self-organizes the emergence of polygonal surface structures from interaction between its constitutive lattices. This research focuses on the ethological level of morphogenesis that is relevant to the animal or insect societies, whereby agents mediate the material organizations with environmental aspects. Meanwhile, behavior-based approaches are investigated as a bottom-up system to develop a computational framework in which the lower-level features constantly interact. The lower-level features such as material properties (e.g., geometric descriptions) are abstracted into building blocks or agents to construct the agent’s morphology. The abstracted principles, which define the agent’s morphology, are aggregated into a generative tool to explore the emergent complexities. This exploration coupled with the generative constraint mechanisms steers the collective agents system toward the cloud of solutions; hence, the collective behaviors of agents constitute the polygonal surface structures. This polygonal system is a bottom up approach of developing the complex surface that emerges through topological and topographical interaction between cells and their surrounding environment. Subsequently, the integrative system is developed through agent-based parametric modelling, in which the knowledge-based system as a top-down approach is substituted with the agent system together with its morphological features and significant behaviors.
keywords	Agent-Based System, Behavioral-Based System, Polygonal Surface Structures, Self-Organization and Emergence
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2015_096
id	caadria2015_096
authors	Fukuda, Tomohiro; Toshiki Tokuhara and Nobuy-Oshi Yabuki
year	2015
title	Development of A Kinematic Physical Model for Building Volume Simulation
doi	https://doi.org/10.52842/conf.caadria.2015.241
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 241-250
summary	Both a physical model and VR are three-dimensional expression tools to enable intuitive understanding; however, both have pros and cons. Thus, this research took up the challenge of developing a kinematic physical model system for volume simulation of buildings or a city by using a physical model and VR data integrally. The developed system consists both of hardware which packed 105 lifting rods into a grid (the height of the rods could be changed individually by stepper motors) and of software which calculated the height of each rod from the VR data and lifted the rods. Through conducting verification experiments on the prototype system, a physical urban model could be produced in about two minutes, within acceptable error limits. In conclusion, the proposed method was evaluated as feasible and effective.
keywords	Kinematic model; physical model; Virtual Reality; rapid prototyping; building volume simulation; interaction.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	acadia19_234
id	acadia19_234
authors	Grewal, Neil; Escallon, Miguel; Chaudhary, Abhinav; Hramyka, Alina
year	2019
title	INFRASONIC
doi	https://doi.org/10.52842/conf.acadia.2019.234
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 234-245
summary	In 2015, an earthquake of 7.8 magnitude displaced over 6.6 million people in Kathmandu, Nepal. Three years later, the country continues in its struggle to rebuild its capital. The aim of this study is to investigate a construction system, produced from locally sourced materials, that can aggregate and deploy as self-built, habitable infrastructure. The study focused on the relationship between material resonance, earthquake resistant structures, and fabrication strategies. An agent-based form-finding algorithm was developed using knowledge acquired through physical prototyping of mycelium-based composites to generate earthquake resistant geometries, optimize material usage, and enhance spatial performance. The results show compelling evidence for a construction methodology to design and construct a 3-4 story building that holds a higher degree of resistance to earthquakes. The scope of work contributes to advancements in bioengineering, confirming easy-to-grow, light-weight mycelium-composites as viable structural materials for construction.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	sigradi2015_8.192
id	sigradi2015_8.192
authors	Braida, Frederico; Rosa, Ashiley Adelaide; Silva, Izabela Ferreira; Homem, Diogo Machado; Jardim, Artur da Silva
year	2015
title	The exploration of the projetual world of the building blocks through the interactive digital game Minecraft
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 371-377.
summary	This article proposes a reflection on the possibilities of using games that explore architectural design world of building blocks applied to the universe of Architecture and Urbanism design, both from a literature search and through empirical data collected from a workshop coordinated by the Research Group of Languages and Expressions of Architecture, Urbanism and Design. The objective is to highlight the possibilities and limitations of using the projetual world of building blocks as an academic material for Architecture and Urbanism, especially after the experience of the interactive game Minecraft based on the Grammar Shape.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2015_172
id	caadria2015_172
authors	Choo, Thian-Siong and Patrick Janssen
year	2015
title	Performance-Based Parametric Design : A Framework for Building Envelope Design
doi	https://doi.org/10.52842/conf.caadria.2015.603
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 603-612
summary	Existing performance-based design exploration methods typically suffer from a lack of real-time feedback and a lack of actionable feedback. This paper proposes a hybrid design exploration method that overcomes these issues by combining parametric modelling, surrogate modelling, and evolutionary algorithms. The proposed method is structured as a mixed-initiative approach, in which parametric modelling is the key to creating a synergistic relationship between the architect and the computational system. Surrogate-based techniques will address the issue of real-time feedback, the evolutionary exploration techniques will address the issue of actionable feedback. As a first stage in developing the PEX method, this paper reports on two experiments conducted to identify an appropriate surrogate modelling technique that is efficient and robust.
keywords	Performance-based design, parametric modelling, surrogate modelling, evolutionary algorithms
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2015_17
id	ecaade2015_17
authors	Conti, Zack Xuereb; Shepherd, Paul and Richens, Paul
year	2015
title	Multi-objective Optimisation of Building Geometry for Energy Consumption and View Quality
doi	https://doi.org/10.52842/conf.ecaade.2015.1.287
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 287-294
wos	WOS:000372317300031
summary	In property development, the view quality contributes significantly to the property value. In many cases, the architect is constrained by the property developer to take full advantage of the view by designing large glazed facades ignoring the consequence on the energy consumption of the building caused by the conflicting orientation of the view. This paper presents a design tool to help the architect interactively explore different building and window geometries that trade-off energy consumption (kWh) and view quality (€). This design tool allows interaction with parametric building geometry, simulation of energy consumption and view quality, and an optimisation search engine. The simulation of the view quality quantifies a view according to the visibility and quality of its contents by using a novel view-scoring method. The design tool is tested with both north-oriented and south-oriented views and produces a Pareto front from which resulting geometries are visualised.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=5681d860-702e-11e5-b00a-0bb98a953a02
last changed	2022/06/07 07:56

_id	caadria2016_415
id	caadria2016_415
authors	Crolla, Kristof and Adam Fingrut
year	2016
title	Protocol of Error: The design and construction of a bending-active gridshell from natural bamboo
doi	https://doi.org/10.52842/conf.caadria.2016.415
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 415-424
summary	This paper advocates alternative methods to overcome the impossibility of realising ‘perfect’ digital designs. It discusses Hong Kong’s 2015 ‘ZCB Bamboo Pavilion’ as a methodological case study for the design and construction of architecture from unprocessed natu- ral bamboo. The paper critically evaluates protocols set up to deal with errors resulting from precise digital design systems merging with inconsistent natural resources and onsite craftsmanship. The paper starts with the geometric and tectonic description of the project, illus- trating a complex and restrictive construction context. Bamboo’s unique growth pattern, structural build-up and suitability as a bending- active material are discussed and Cantonese bamboo scaffolding craftsmanship is addressed as a starting point for the project. The pa- per covers protocols, construction drawings and assembly methods developed to allow for the incorporation and of large building toler- ances and dimensional variation of bamboo. The final as-built 3d scanned structure is compared with the original digital model. The pa- per concludes by discussing the necessity of computational architec- tural design to proactively operate within a field of real-world inde- terminacy, to focus on the development of protocols that deal with imperfections, and to redirect design from the virtual world towards the latent opportunities of the physical.
keywords	Bamboo; bending-active gridshells; physics simulation; form-finding; indeterminacy
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	acadia17_202
id	acadia17_202
authors	Cupkova, Dana; Promoppatum, Patcharapit
year	2017
title	Modulating Thermal Mass Behavior Through Surface Figuration
doi	https://doi.org/10.52842/conf.acadia.2017.202
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 202-211
summary	This research builds upon a previous body of work focused on the relationship between surface geometry and heat transfer coefficients in thermal mass passive systems. It argues for the design of passive systems with higher fidelity to multivariable space between performance and perception. Rooted in the combination of form and matter, the intention is to instrumentalize design principles for the choreography of thermal gradients between buildings and their environment from experiential, spatial and topological perspectives (Figure 1). Our work is built upon the premise that complex geometries can be used to improve both the aesthetic and thermodynamic performance of passive building systems (Cupkova and Azel 2015) by actuating thermal performance through geometric parameters primarily due to convection. Currently, the engineering-oriented approach to the design of thermal mass relies on averaged thermal calculations (Holman 2002), which do not adequately describe the nuanced differences that can be produced by complex three-dimensional geometries of passive thermal mass systems. Using a combination of computational fluid dynamic simulations with physically measured data, we investigate the relationship of heat transfer coefficients related to parameters of surface geometry. Our measured results suggest that we can deliberately and significantly delay heat absorption re-radiation purely by changing the geometric surface pattern over the same thermal mass. The goal of this work is to offer designers a more robust rule set for understanding approximate thermal lag behaviors of complex geometric systems, with a focus on the design of geometric properties rather than complex thermal calculations.
keywords	design methods; information processing; physics; smart materials
series	ACADIA
email
last changed	2022/06/07 07:56

_id	ecaade2015_83
id	ecaade2015_83
authors	Fukuda, Tomohiro; Mori, Keisuke and Imaizumi, Jun
year	2015
title	Integration of CFD, VR, AR and BIM for Design Feedback in a Design Process - An Experimental Study
doi	https://doi.org/10.52842/conf.ecaade.2015.1.665
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 665-672
wos	WOS:000372317300072
summary	To improve indoor thermal environment, it is necessary to promote a lean design process, so forecasting and consensus building by experiment and numerical calculation from the design stage have become essential. Rapid advances in software and hardware allow feedback to be generated on novel design alternatives, rather than relying on simulation results based on past designs. However, this concept has not been fully verified. Therefore, this study presents an integrated design tool which consists of Computational Fluid Dynamics (CFD), Virtual Reality (VR), Augmented Reality (AR) and Building Information Modeling (BIM). The tool was applied to the problems of an actual housing design project. Both the content of design feedback on design problems revealed through simulations in the project, and the features in the feedback process were discussed.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2018_243
id	ecaade2018_243
authors	Gardner, Nicole
year	2018
title	Architecture-Human-Machine (re)configurations - Examining computational design in practice
doi	https://doi.org/10.52842/conf.ecaade.2018.2.139
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 139-148
summary	This paper outlines a research project that explores the participation in, and perception of, advanced technologies in architectural professional practice through a sociotechnical lens and presents empirical research findings from an online survey distributed to employees in five large-scale architectural practices in Sydney, Australia. This argues that while the computational design paradigm might be well accepted, understood, and documented in academic research contexts, the extent and ways that computational design thinking and methods are put-into-practice has to date been less explored. In engineering and construction, technology adoption studies since the mid 1990s have measured information technology (IT) use (Howard et al. 1998; Samuelson and Björk 2013). In architecture, research has also focused on quantifying IT use (Cichocka 2017), as well as the examination of specific practices such as building information modelling (BIM) (Cardoso Llach 2017; Herr and Fischer 2017; Son et al. 2015). With the notable exceptions of Daniel Cardoso Llach (2015; 2017) and Yanni Loukissas (2012), few scholars have explored advanced technologies in architectural practice from a sociotechnical perspective. This paper argues that a sociotechnical lens can net valuable insights into advanced technology engagement to inform pedagogical approaches in architectural education as well as strategies for continuing professional development.
keywords	Computational design; Sociotechnical system; Technology adoption
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia15_81
id	acadia15_81
authors	Hussein, Ahmed
year	2015
title	Sandworks / Sand Tectonic Prototype
doi	https://doi.org/10.52842/conf.acadia.2015.081
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 81-94
summary	This paper outlines a material based research that proposes a time-based architecture that extends Frei Otto’s research of sand formations using sand’s natural angle of repose. The tectonic system focuses on developing compressive structures of sand for hot climate desert areas through a zero-waste formative process whose architecture reorganizes materials naturally available on the site. Formations are hardened as a surface through the phase changing properties of a saline solution which crystallizes when cooled, bonding with the sand. The proportion of insulation material defines the building life span redistributes the materials back into its environment at the end of its cycle. The materiality and spatial qualities of the project are based on the conical and constant angle surfaces generated through the gravitational process of sand formation. Between the digital opportunities of sand formation and its physical possibilities, this paper outlines the analogue-digital methods of sand computation through a comprehensive study in four main sections; material system, material computation, design system and robotic fabrication.
keywords	Material computation, analogues digital methods, Sand, Digital design and robotic fabrication, ecological tectonic system
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	ascaad2010_097
id	ascaad2010_097
authors	Kenzari, Bechir
year	2010
title	Generative Design and the Reduction of Presence
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 97-106
summary	Digital design/fabrication is slowly emancipating architectural design from its traditional static/representational role and endowing it instead with a new, generative function. In opposition to the classical isomorphism between drawings and buildings, wherein the second stand as translations of the first, the digital design/fabrication scenario does not strictly fall within a semiotic frame as much as within a quasi biological context, reminiscent of the Aristotelian notion of entelechy. For the digital data does not represent the building as much it actively works to become the building itself. Only upon sending a given file to a machine does the building begin to materialize as an empirical reality, And eventually a habitable space as we empirically know it. And until the digital data actualizes itself, the building qua building is no more than one single, potential possibility among many others. This new universe of digital design/fabrication does not only cause buildings to be produced as quick, precise, multiply-generated objects but also reduces their presence as original entities. Like cars and fashion items, built structures will soon be manufactured as routinely-consumed items that would look original only through the subtle mechanisms of flexibility: frequent alteration of prototype design (Style 2010, Style 2015..) and “perpetual profiling” (mine, yours, hers,..). The generic will necessarily take over the circumstantial. But this truth will be veiled since “customized prototypes” will be produced or altered to individual or personal specifications. This implies that certain “myths” have to be generated to speed up consumption, to stimulate excessive use and to lock people into a continuous system which can generate consumption through a vocabulary of interchangeable, layered and repeatable functions. Samples of “next season’s buildings” will be displayed and disseminated to enforce this strategy of stimulating and channeling desire. A degree of manipulation is involved, and the consumer is flattered into believing that his or her own free assessment of and choice between the options on offer will lead him or her to select the product the advertiser is seeking to sell. From the standpoint of the architect as a maker, the rising upsurge of digital design and fabrication could leave us mourning the loss of what has been a personal stomping ground, namely the intensity of the directly lived experiences of design and building. The direct, sensuous contact with drawings, models and materials is now being lost to a (digital) realm whose attributes refer to physical reality only remotely. Unlike (analogue) drawings and buildings, digital manipulations and prototypes do not exercise themselves in a real space, and are not subjected in the most rigorous way to spatial information. They denote in this sense a loss of immediacy and a withering of corporal thought. This flexible production of space and the consequent loss of immediate experience from the part of the designer will be analyzed within a theoretical framework underpinned mainly by the works of Walter Benjamin. Samples of digitally-produced objects will be used to illustrate this argument.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	caadria2015_188
id	caadria2015_188
authors	Krakhofer, Stefan and Martin Kaftan
year	2015
title	Augmented Reality Design Decision Support Engine for the Early Building Design Stage
doi	https://doi.org/10.52842/conf.caadria.2015.231
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 231-240
summary	Augmented reality has come a long way and experienced a paradigm shift in 1999 when the ARToolKit was released as open source. The nature of interaction between the physical world and the virtual-world has changed forever. Fortunately for the AECO industry, the transition from traditional Computer Aided Design to virtual building design phrased as Building Information Modeling has created a tremendous potential to adopt Augmented Reality. The presented research is situated in the early design stage of project inception and focuses on supporting informed collective decision-making, characterized by a dynamic back and forth analytical process generating large amounts of data. Facilitation aspects, such as data-collection, storage and access to enable comparability and evaluation are crucial for collective decision-making. The current research has addressed these aspects by means of data accessibility, visualization and presentation. At the core of the project is a custom developed Augmented Reality framework that enables data interaction within the design model. In order to serve as a collaborative decision support engine, the framework also allows multiple models and their datasets to be displayed and exercised simultaneously. The paper demonstrates in the case study the successful application of the AR tool during collaborative design decision meetings.
keywords	Augmented Reality; Design Decision Support; Data Visualization.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ecaade2015_11
id	ecaade2015_11
authors	Langenhan, Christoph and Petzold, Frank
year	2015
title	Beyond the Bubble - Computer-aided Topological Analysis and Parametric De-sign of Room Configurations in University Education
doi	https://doi.org/10.52842/conf.ecaade.2015.1.237
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 237-243
wos	WOS:000372317300025
summary	In the early stages of the design process, the conceptual idea of the envisaged building and its design parameters is still vague and incomplete. While the built environment, the end product of this design process, can be represented concretely in the form of drawings or computer models, the initial design idea can usually only be formulated abstractly, for example as schematic functional descriptions or as topological constellations of spaces. In this paper we discuss the use of reference projects to support the design process along with ways of formalising spatial configurations and their use in the design process, and examine how these can be supported using software tools. We discuss the elaboration of requirements for such software tools and their implementation as plug-in to facilitate a seamless process from analysis to evaluation in a parametric design environment. By way of example, we describe selected functionality of a plug-in developed for “Grasshopper” and “Rhino 3D” to support the design process in the early conceptual stages.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=d451cf80-702d-11e5-911a-5b8eac8e4692
last changed	2022/06/07 07:52

_id	cf2015_484
id	cf2015_484
authors	Liao, Kai; Vries, Bauke de; Kong, Jun and Zhang, Kang
year	2015
title	Pattern, cognition and spatial information processing: Representations of the spatial layout of architectural design with spatial-semantic analytics
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 484.
summary	In this paper, we review and extend the idea of Alexander’s “pattern language”, especially from the viewpoints of complexity theories, information systems, and human-computer interaction, to explore spatial cognition-based design representations for “intelligent and adaptive/interactive environment” in architecture and urban planning. We propose a theoretic framework of design patterns “with spatial information processing”, and attempt to incorporate state-of-the-art computational methods of information visualization/visual analytics into the conventional CAAD approaches. Focused on the spatial-semantic analytics, together with abstract syntactic pattern representation, by using “spatial-semantic aware” graph grammar formalization, i.e., Spatial Graph Grammars (SGG), the relevant models, algorithms and tool are proposed. We testify our theoretic framework and computational tool VEGGIE (a Visual Environment of Graph Grammar Induction Engineering) by using actual architectural design works (spatial layout exemplars of a small office building and the three house projects by Frank Lloyd Wright) as study cases, so as to demonstrate our proposed approach for practical applications. The results are discussed and further research is suggested.
keywords	Pattern language, complex adaptive systems, spatial cognition, design representations, spatial information processing, Artificial Intelligence, visual language, Spatial Graph Grammars (SGG), spatial-semantic analytics.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	eaea2015_t3_paper12
id	eaea2015_t3_paper12
authors	LoBuglio, David; Derycke, Denis
year	2015
title	Reduce to Understand: A Challenge for Analysis and Three-dimensional Documentation of Architecture
source	ENVISIONING ARCHITECTURE: IMAGE, PERCEPTION AND COMMUNICATION OF HERITAGE [ISBN 978-83-7283-681-6],Lodz University of Technology, 23-26 September 2015, pp.388-397
summary	For nearly thirty years, the digital phenomenon has integrated many disciplines. Those involved in image processing and analysis took advantage of this major technological breakthrough to revisit the tools and methods of their discipline. In this context, the architectural field, and more specifically the one of heritage analysis and documentation, have greatly benefited from the development of acquisition and visualization techniques. Today, it is no longer unusual to document a building with millions of three-dimensional spatial coordinates. Nevertheless, until the last century, documentation by drawing corresponded to a work of reverse engineering in which it belonged to the architect to understand the object and to represent its key feature. Today, 3D data acquisition technology promotes an increasingly “figurative” representation of architecture. In this paper, we consider some epistemological avenues for the integration of those new approaches to the requirements of architectural representation.
keywords	computer graphics; architectural representation; architectural education; architectural survey
series	EAEA
email
last changed	2016/04/22 11:52

_id	ecaade2015_231
id	ecaade2015_231
authors	Lonsing, Werner
year	2015
title	Beyond Smart Remote Controls - Developing a More Integrated and Customizable Implementation of Automation in a Building by Utilizing Tools and Concepts from Makers
doi	https://doi.org/10.52842/conf.ecaade.2015.2.679
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 679-686
wos	WOS:000372316000075
summary	“Home Automation” describes the connecting of electronic household appliances to a centralized control unit like e.g. an app on a smart phone or some control panel. The overall goal of these efforts is to provide a general remote control for existing devices. By comparison a concept of home automation as part of a building design process has yet not come into shape.
series	eCAADe
email
last changed	2022/06/07 07:59

_id	caadria2015_164
id	caadria2015_164
authors	Mcginley, Tim and Darren Fong
year	2015
title	Designghosts
doi	https://doi.org/10.52842/conf.caadria.2015.365
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 365-374
summary	For architects, a database of typological specific occupant behaviour patterns could help in the design of buildings, through a typological specific insight into the previous use of buildings. In addition, appropriately represented occupant behaviour data in commercial buildings represent an important factor for facilities management (FM) and business information (BI) teams in the assessment the operational performance of the enterprise. Building Information Models (BIM) could provide an appropriate reference for this user data. However the mapping of user behaviour data to the BIM models is unclear. This paper presents a ‘designGhost’ information system to support the mapping of occupant behaviour to BIM models, so that the user data can be represented to the different stakeholders. To test the information system a prototype tool is presented to enable the mapping of the building use (designGhost) data to the building’s spaces in order to support architects in the design stage and to support navigation from an operational (FM/BI) perspective. This paper addressees the challenges of developing such a system and proposes directions for future work.
keywords	Post occupancy evaluation; BIM; visibility graph analysis; designGhost; occupant behaviour; design science; building design and operation.
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	caadria2015_087
id	caadria2015_087
authors	Moleta, Tane J.
year	2015
title	Flowing through Space
doi	https://doi.org/10.52842/conf.caadria.2015.489
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 489-497
summary	The general field this presentation will address is the integration of game mechanics within the design studio. The CAAD community has invested considerable energy into the insertion of games within education to teach specific skills or develop design behaviours. Building on some of this research we report on three years of studio teaching in undergraduate architectural studies. We propose that the outcomes of the design studio can benefit greatly from employing game mechanics to encourage constructive design behaviours within a student cohort. This body research flips the traditional location of game mechanic, shifting the motivations from the hands of the teacher to place the mechanic in the hand of the student. The research reports an increased level of engagement and collaboration and presents a body of work that extends beyond traditional expectations of the architectural design studio.
keywords	Education, game mechanics, design studio.
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ecaade2015_169
id	ecaade2015_169
authors	Nakama, Yuki; Onishi, Yasunobu and Iki, Kazuhisa
year	2015
title	Development of Building Information Management System with Data Collecting Functions based on IoT Technology
doi	https://doi.org/10.52842/conf.ecaade.2015.1.647
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 647-655
wos	WOS:000372317300070
summary	Facility management is aimed at energy saving, increasing the lifespan of buildings, enhancing the satisfaction of facility users and reducing running costs. To that end, it is important to grasp the conditions of the building in detail, and to analyze them one by one in order to execute building operation and maintenance strategically. However, conventional CAFM is insufficient. Therefore, we developed a system (called Building Information Management System) to utilize BIM data made on a Web site. We used groupware to support the system and an information platform that enables continuous management of a great variety of maintenance information. In addition, we developed a system to input information of building operation and maintenance using a mobile device on the site of checking and patrolling so as to reduce the burden of inputting information. A sensor network is used to acquire building operation and maintenance information to enhance building operation and maintenance. We also developed a system to automatically input sensing information into the building information for Building Information Management System, and to connect it with a 3D model. It has therefore become easier to collect the large amount of information necessary for strategic building operation and maintenance.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=0d63b958-7021-11e5-a1ec-00190f04dc4c
last changed	2022/06/07 07:59

For more results click below: