Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 591

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2022_278
id	caadria2022_278
authors	Ortner, F. Peter and Tay, Jing Zhi
year	2022
title	Optimizing Design Circularity: Managing Complexity in Design for Circular Economy Through Single and Multi-Objective Optimisation
doi	https://doi.org/10.52842/conf.caadria.2022.1.191
source	Jeroen van Ameijde, Nicole Gardner, Kyung Hoon Hyun, Dan Luo, Urvi Sheth (eds.), POST-CARBON - Proceedings of the 27th CAADRIA Conference, Sydney, 9-15 April 2022, pp. 191-200
summary	This paper advances the application of computational optimization to design for circular economy (CE) by comparing results of scalarized single-objective optimization (SOO) and multi-objective optimization (MOO) to a furniture design case study. A framework integrating both methods is put forward based on results of the case study. Existing design frameworks for CE emphasize optimization through an iterative process of manual assessment and redesign (Ellen MacArthur Foundation, 2015). Identifying good design solutions for CE, however, is a complex and time-consuming process. Most prominent CE design frameworks list at least nine objectives, several of which may conflict (Reike et al., 2018). Computational optimization responds to these challenges by automating search for best solutions and assisting the designer to identify and manage conflicting objectives. Given the many objectives outlined in circular design frameworks, computational optimisation would appear a priori to be an appropriate method. While results presented in this paper show that scalarized SOO is ultimately more time-efficient for evaluating CE design problems, we suggest that given the presence of conflicting circular design objectives, pareto-set visualization via MOO can initially better support designers to identify preferences.
keywords	Design for Circular Economy, Computational Optimisation, Sustainability, Design Optimisation, SDG 11, SDG 12
series	CAADRIA
email
last changed	2022/07/22 07:34

_id	caadria2015_162
id	caadria2015_162
authors	Amano, Hiroshi
year	2015
title	Panelisation With Sheet Metal Cladding On Free-Form Roof
doi	https://doi.org/10.52842/conf.caadria.2015.713
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 713-722
summary	This document shows a rationalisation method of sheet metal panelling on free-formed surfaces and a case study of it. Ichimonji-buki is a cladding method widely used in Japan for the roofs of traditional temples and shrines. It consists of sheet metal roofing with flat lock seams, allowing for minimal gaps along the joints. By integrating the characteristics of the flat lock joint and a dynamic relaxation analysis via computational modelling, continuous vertical seam lines can be realised while keeping panels almost identical in shape and with a limited number of variations. In the case study of Silver Mountain, the free-formed roof is clad with approximately 8,000 panels, out of which 92% are standardised and can be easily fabricated.
keywords	Panelisation, dynamic relaxation, flat lock seams.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia15_357
id	acadia15_357
authors	Ashour, Yassin; Kolarevic, Branko
year	2015
title	Heuristic Optimization in Design
doi	https://doi.org/10.52842/conf.acadia.2015.357
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 357-369
summary	This paper presents a workflow called the ‘heuristic optimization workflow’ that integrates Octopus, a Multi-Objective Optimization (MOO) engine with Grasshopper3D, a parametric modeling tool, and multiple simulation software. It describes a process that enables the designer to integrate disparate domains via Octopus and complete a feedback loop with the developed interactive, real-time visualization tools. A retrospective design of the Bow Tower in Calgary is used as a test case to study the impact of the developed workflow and tools, as well as the impact of MOO on the performance of the solutions. The overall workflow makes MOO based results more accessible to designers and encourages a more interactive ‘heuristic’ exploration of various geometric and topological trajectories. The workflow also reduces design decision uncertainty and design cycle latency through the incorporation of a feedback loop between geometric models and their associated quantitative data. It is through the juxtaposition of extreme performing solutions that serendipity is created and the potential for better multiple performing solutions is increased.es responsive systems, which focus on the implementation of multi-objective adaptive design prototypes from sensored environments. The intention of the work is to investigate multi-objective criteria both as a material system and as a processing system by creating prototypes with structural integrity, where the thermal energy flow through the prototype, to be understood as a membrane, can be controlled and the visual transparency altered. The work shows performance based feedback systems and physical prototype models driven by information streaming, screening, and application.
keywords	Multi-Objective Optimization, Generative Design, Performance-Based Design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2015_193
id	ecaade2015_193
authors	Eloy, Sara; Ourique, Lázaro, Pedro, Tiago, Resende, Ricardo, Dias, MiguelSales and Freitas, João
year	2015
title	Analysing People's Movement in the Built Environment via Space Syntax, Objective Tracking and Gaze Data
doi	https://doi.org/10.52842/conf.ecaade.2015.1.341
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 341-350
wos	WOS:000372317300037
summary	In this paper we use analysis tools from Space Syntax and objective observation of the human behaviour, to understand the impact of landmarks in the walking patterns of users of spaces. Our case study was a large exterior public open space (University Campus), in which participants could walk freely and simultaneously be tracked by several sensors. We carried Space Syntax analysis for this space, and then collected Global Positioning System (GPS) tracking information and used a mobile eye-tracking device to acquire eye gaze information. The collected data allowed us to map and analyse each subject behaviour in the public space. A more specific analysis was done to four selected landmarks that, according to the Space Syntax analysis, were the ones with higher integration values. Results indicate that landmarks with such higher integration values show also a larger count of fixations and saccades of gaze interaction.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=4c23b54e-702b-11e5-b1b2-53e73ebc791b
last changed	2022/06/07 07:55

_id	ecaade2015_307
id	ecaade2015_307
authors	Kallegias, Alexandros and Erdine, Elif
year	2015
title	Design by Nature: Concrete Infiltrations
doi	https://doi.org/10.52842/conf.ecaade.2015.2.513
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 513-520
wos	WOS:000372316000058
summary	The paper aims to address methods of realizing computationally generated self-organizing systems on a one-to-one scale with the employment of a singular material system. The case study described in this paper is the outcome of an investigation which has explored earth scaffolding, fabric form-work, and concrete materiality during an international three-week architecture workshop. Real-time generative form-finding methods based on branching and bundling systems in nature have been developed and simulated in an open-source programming environment. The outcome of the simulation stage has been analyzed structurally via Finite Element Analysis (FEA), results of which have served as inputs for the fine-tuning of the simulation. Final three-dimensional geometry has been fabricated by employing fabric, essentially forming the fabric form-work. Fabric form-work is then laid on top of the earth scaffolding, followed by the process of concrete casting. From a pedagogical point of view, the research focuses on the integration of digital design techniques between various design/architecture/analysis platforms combined with basic and advanced techniques of construction within a limited time frame.abstract here by clicking this paragraph.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	cf2015_205
id	cf2015_205
authors	Oliveira, Eduardo; Kirley, Michael; Kvan, Tom; Karakiewicz, Justyna and Vaz, Carlos
year	2015
title	Distributed and heterogeneous data analysis for smart urban planning
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 205.
summary	Over the past decade, ‘smart’ cities have capitalized on new technologies and insights to transform their systems, operations and services. The rationale behind the use of these technologies is that an evidence-based, analytical approach to decision-making will lead to more robust and sustainable outcomes. However, harvesting high-quality data from the dense network of sensors embedded in the urban infrastructure, and combining this data with social network data, poses many challenges. In this paper, we investigate the use of an intelligent middleware – Device Nimbus – to support data capture and analysis techniques to inform urban planning and design. We report results from a ‘Living Campus’ experiment at the University of Melbourne, Australia focused on a public learning space case study. Local perspectives, collected via crowdsourcing, are combined with distributed and heterogeneous environmental sensor data. Our analysis shows that Device Nimbus’ data integration and intelligent modules provide high-quality support for decision-making and planning.
keywords	smart city, smart campus, middleware, data fusion, urban design, urban planning.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	sigradi2015_sp_8.284
id	sigradi2015_sp_8.284
authors	Queiroz, Natália; Dantas, Ney; Nome, Carlos; Vaz, Carlos
year	2015
title	Designing a Building envelope using parametric and algorithmic processes
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 797-801.
summary	This article presents a case study on a vertical building envelope design considering Recife ?s climatic conditions. It consists of the utilization of parametric and algorithmic processes to distribute sun shading devices. The study uses computational tools such as Grasshopper and the DIVA for Grasshopper. The latter is a thermal energy simulation tool that uses the Energy Plus 7.0 and Daysim for calculations. The model uses incident solar radiation simulation on the envelope as basis for distribution of shading devices. The result is a parametric model that automatically responds to urban and climatic characteristics, through simulations integrated to the 3D model.
keywords	Shading Devices, Parameterization, Grasshopper, DIVA
series	SIGRADI
email
last changed	2016/03/10 09:58

_id	acadia15_123
id	acadia15_123
authors	Askarinejad, Ali; Chaaraoui, Rizkallah
year	2015
title	Spatial Nets: the Computational and Material Study of Reticular Geometries
doi	https://doi.org/10.52842/conf.acadia.2015.123
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 123-135
summary	Reticular systems are in many aspects a distinct taxonomy of volumetric geometries. In comparison with the conventional embodiment of a ‘volume’ that encapsulates a certain quantity of space with a shell reticular geometries emerge from the accumulation of micro elements to define a gradient of space. Observed in biological systems, such structures result from their material properties and formation processes as well as often ‘simple’ axioms that produce complex results. In micro or macro levels, from forest tree canopies to plant cell walls these porous volumes are not shaped to have a singular ‘solution’ for a purpose; they provide the fundamental geometric characteristics of a ‘line cloud’ that is simultaneously flexible in response to its environment, porous to other systems (light, air, liquids) and less susceptible to critical damage. The porosity of such systems and their volumetric depth also result in kinetic spatial qualities in a 4D architectural space. Built upon a ‘weaving’ organization and the high performance material properties of carbon fiber composite, this research focuses on a formal grammar that initiates the complex system of a reticular volume. A finite ‘lexical’ axiom is consisted of the basic characters of H, M and L responding to the anchor points on the highest, medium and lower levels of the extruding loom. The genome thus produces a string of data that in the second phase of programming are assigned to 624 points on the loom. The code aims to distribute the nodes across the flat line cloud and organize the sequence for the purpose of overlapping the tensioned strings. The virtually infinite results are then assessed through an evolutionary solver for confining an array of favorable results that can be then selected from by the designer. This research focuses on an approximate control over the fundamental geometric characteristics of a reticular system such as node density and directionality. The proposal frames the favorable result of the weave to be three-dimensional and volumetric – avoiding distinctly linear or surface formations.
keywords	Reticular Geometries, Weaving, Line Clouds, Three-dimensional Form-finding, Carbon fiber, Prepreg composite, Volumetric loom, Fiberous Materials, Weaving fabrication, Formal Language, Lexical design, Evolutionary solver
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2015_194
id	caadria2015_194
authors	Lu, Chi-Ming; Jia-Yih Chen, Cheng-An Pan and Taysheng Jeng
year	2015
title	A BIM Tool for Carbon Footprint Assessment of Building Design
doi	https://doi.org/10.52842/conf.caadria.2015.447
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 447-456
summary	The objective of this research is to develop a tool for assessing carbon footprints of a building in the design process using BIM technology. Life cycle assessment and carbon footprint assessment are the two basic criteria in evaluating the emission reduction of CO2e.International assessment standards have been established for mass-produced merchandise and organizational operations. However, the existing standards cannot directly disclose the hotspots of carbon footprints in the building life cycle. An assessment method concerning local climate, living culture, ecology and local construction style is required for building design. This research work presents a framework by which a BIM-enabled data visualization tool is developed to support the carbon disclosure in the building design process.
keywords	Carbon Footprint Assessment; BIM; BCF.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	acadia15_69
id	acadia15_69
authors	Wilcox, Glenn; Trandafirescu, Anca
year	2015
title	C-Lith: Carbon Fiber Architectural Units
doi	https://doi.org/10.52842/conf.acadia.2015.069
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 69-79
summary	C-LITH is the reconsideration of the architectural building unit through the exploration of new composite techniques and materials. Our project develops individual compo- nents that exploit the strength, lightness, and variability possible with carbon ber laments when paired with computation, digital fabrication, and hand assembly. Traditionally, architectural units made of brick or concrete are small and multiple, heavy, dif cult to vary, and are much better in compression than tension. Using carbon ber laments to create variable units allows for larger individual units that can vary in both shape and structural performance as needed. Our units, developed through winding pre-preg carbon ber tow around disposable molds, bene t structurally from the quasi-isotropic properties that are developed through the winding patterns. The specific structural capacities of the units remain to be understood through further testing and analysis, which falls outside the scope of this current research. At this junction, structural capacities have been determined empirically, i.e. will it stand? Most importantly, as a formal study, our units address the use of carbon ber at the scale of architectural production. A majority of the effort involved in materializing C-LITH was the development of a two-fold prototypical manufacturing process that produces the components and assembly. For this we invented a method to quickly and cheaply construct variable cardboard molds that could withstand the wound casting and baking steps, but could also be easily weakened through water immersion to be removed. For the assembly we developed a rigid dummy-jig system to hold the joint plates in position with a high level of precision but could also incrementally absorb the adjustment errors unavoidable in hand assembly systems. Using a simple pin connection the resultant structures can be easily disassembled for transportation and reassembly elsewhere.
keywords	Carbon Fiber Composite, Variability, Fabrication, Computation, Coding, Molds, Jigging, Assembly
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:57

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
doi	https://doi.org/10.52842/conf.acadia.2021.530
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	ecaade2015_122
id	ecaade2015_122
authors	Agirbas, Asli
year	2015
title	The Use of Digital Fabrication as a Sketching Tool in the Architectural Design Process - A Case Study
doi	https://doi.org/10.52842/conf.ecaade.2015.2.319
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 319-324
wos	WOS:000372316000037
summary	Computer-aided manufacturing (CAM) technologies including computer numerically controlled (CNC) milling, laser cutting and 3D printing are becoming cheaper and globally more accessible. Accordingly, many design professionals, academics and students have been able to experience the benefits and challenges of using digital fabrication in their designs. The use of digital fabrication in the education of architecture students has become normal in many schools of architecture, and there is a growing demand for computer-aided manufacturing (CAM) logic and fabrication knowledge in student learning. Clearly, architecture students are acquiring material base-thinking, time management, production methods and various software skills through this digital fabrication. However, it appears to be the case that architecture students use digital fabrication mainly in the final stage of their design or in their finishing work. In this study, computer-aided manufacturing (CAM) technologies have been used as a sketch tool rather than simply for fabricating a final product in the architectural design process and the advantages of this educational practice are demonstrated.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=79005d78-6fe6-11e5-b555-13a7f78815dc
last changed	2022/06/07 07:54

_id	sigradi2015_9.347
id	sigradi2015_9.347
authors	Andrade, Eduardo; Orellana, Nicolas; Mesa, Javiera; Felmer, Patricio
year	2015
title	Spatial Configuration and Sociaty. Comparison between the street market Tristan Matta and Tirso de Molina Market
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 481-485.
summary	This research aims to clarify how certain visual and accessibility patterns, in buildings and urban environments, are related to social activities that take place in them. The study, based on the theory of space syntax (Hillier & Hanson 1984; Hillier, 1996), seeks to recognize patterns of behavior, both individual and aggregate. The case studies are Tirso de Molina Market and the free street market Tristan Matta, both in Santiago de Chile.
keywords	pace Syntax, Visibilidad, Accesibilidad, Conectividad, Comportamiento
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2015_10.177
id	sigradi2015_10.177
authors	Angelo, Alex Garcia Smith; Manna, Ilaria La; Hernandez, Oscar; Valdiviezo, Marlon; Lastras, Alejandra Díaz de León; Salazar, Oscar Ivan Campo; Montezuma, Vanessa; Zubieta, Marco
year	2015
title	Fab Lab and Multiculturalism in Latin America: The Fab Lat Kids case and the project “Emosilla”
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 551-557.
summary	This paper expresses a lecture of the experience of an investigation carried by a group of Latin American Fab Labs dedicated to the promotion of the use of modeling, digital fabrication, and network communication as tools of educational and social development of children in latin culture. This study is based on online workshop typologies with a methodological perspective that included local technological adaptations, data gathering, and exchange of knowledge on the fab lab network.
keywords	Design, Digital Manufacturing, Society, Technology Learning, Collaborative Network
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2015_27
id	ecaade2015_27
authors	Asanowicz, Aleksander
year	2015
title	Museum 2.0 - Implementation of 3D Digital Tools
doi	https://doi.org/10.52842/conf.ecaade.2015.1.709
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 709-715
wos	WOS:000372317300077
summary	The aim of this work is to try to set out how new technologies can influence the perception of a museum exposition. The problem which will be analysed is how to adapt an exhibition to the needs of visually impaired people. The problem will be considered on the basis of the case studies which were the part of an agreement between the Army museum in Bialystok and our Faculty. In traditional museums the main principle is the prohibition of touching exhibits.The project goal was to help blind people understand the features of the environment around them through the sense of touch. The novelty of this work is the study of how new digital technologies may improve the perception for the visually impaired.In the paper the method of 3D scanning, modelling and 3D printing will be presented. In conclusion the encountered problems and plans for further action will be discussed.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=8e079058-702a-11e5-8ac3-d3d5c9e6f5fe
last changed	2022/06/07 07:54

_id	eaea2015_t2_paper02
id	eaea2015_t2_paper02
authors	Astuti, Erika Yuni
year	2015
title	Local Perception of a Conservation Heritage Area, a Case Study of the Darmo Residential Area, Surabaya, Indonesia
source	ENVISIONING ARCHITECTURE: IMAGE, PERCEPTION AND COMMUNICATION OF HERITAGE [ISBN 978-83-7283-681-6],Lodz University of Technology, 23-26 September 2015, pp.132-141
summary	This paper has argued that interdisciplinary approach is necessary to get better understanding of the problem within a built heritage area. It is found that inhabitants perceived the mixed heritage architecture as their own, an appreciation also expressed toward perception values of building: uniqueness, aesthetic and age. The research has also shown that inhabitants in the Darmo residential area - Surabaya, Indonesia perceived that their area are worth to be conserve due to the function such as the city amenities and attribute of the shady environment. Taken together, these results suggest that a better understanding of inhabitant’s awareness will contribute to the successful conservation program.
keywords	urban heritage; historic residential area; inhabitant’s perception of heritage values
series	EAEA
email
last changed	2016/04/22 11:52

_id	sigradi2015_11.34
id	sigradi2015_11.34
authors	Bacinoglu, Saadet Zeynep
year	2015
title	From material to material with new abilities. Performative Skin: an unfinished product derived through the organizational logic as developed through research on ‘movement’
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 631-636.
summary	This paper presents the process and products from research on ‘a movement behavior’, transforming the initial surface from one state to other states. The study developed an initial model of material organization inspired by nature: the adaptable exoskeleton of the armadillium vulgare. Through geometric analysis of functional variation in the exoskeleton’s unit shape, and physical model making, the underlying principle is translated into design & production rules. The generative model of ‘an adaptable segmented system’ is constructed through a geometric abstraction of the exoskeleton, achieving diverse functions such as variability in form, volume, porosity, flexibility and strength, through a distribution of ‘material geometry’ with the folding technique. The potentiality of this parametric physical model (based on simple systematicity) is questioned in relation to diverse situations that result in complex surface adaptations. This research shows the formulation of a design intention.
keywords	Digital Craft, Folding, Material Computation, Informed Matter
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2015_74
id	ecaade2015_74
authors	Bard, Joshua D.; Blackwood, David, Sekhar, Nidhi and Smith, Brian
year	2015
title	Decorative Robotic Plastering - A Case Study of Real-Time Human Machine-Collaboration in High-Skill Domains
doi	https://doi.org/10.52842/conf.ecaade.2015.2.383
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 383-388
wos	WOS:000372316000044
summary	This paper explores hybrid digital / physical workflows in the building trades, a high-skill domain where human dexterity and craft can be augmented by the precision and repeatability of digital design and fabrication tools. In particular the paper highlights a project where historic techniques of decorative plastering are extended through live motion capture of a drawing implement, information rich visualization projected in the space of fabrication, and custom robotic tooling to generate free-form running moulds. This workflow allows designers and craftspeople to quickly explore patterns through free-hand sketch, test ideas with shaded previews, and seamlessly produce physical parts using robotic collaborators.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia15_195
id	acadia15_195
authors	Belesky, Philip; Monacella, Rosalea; Burry, Mark; Burry, Jane
year	2015
title	A Field in Flux: Exploring the Application of Computational Design Techniques to Landscape Architectural Design Problems
doi	https://doi.org/10.52842/conf.acadia.2015.195
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 195-202
summary	Landscape architectural design problems are under-served by the current canon of computational design techniques. More investigations into modeling landscape phenomena would improve the capabilities of designers working in this field. This paper introduces some of the problems specific to the intersection of computational design and landscape architecture through a case study in generating planting plans using parametric techniques. This illustrates issues of temporality, complexity, and dynamism that distinguish land form from built form alongside the opportunities and challenges found in adapting computation to the design of natural systems.
keywords	Landscape modeling, ecological modeling, landscape architecture, systems design, environmental simulation
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	eaea2015_t3_paper04
id	eaea2015_t3_paper04
authors	Breen, Jack
year	2015
title	Thematic Visualisation Studies: The AA Variations
source	ENVISIONING ARCHITECTURE: IMAGE, PERCEPTION AND COMMUNICATION OF HERITAGE [ISBN 978-83-7283-681-6],Lodz University of Technology, 23-26 September 2015, pp.309-318
summary	The underlying thesis of the research described in this paper is that imaginative, model-based explorations may help us better understand iconic architectural artefacts, such as cultural heritage projects. In order to systematically consider and study architectural artefacts, it is essential for academics to reach a level of clarity – and potentially even consensus – concerning the domains of architectural design that may be considered relevant and to question - often implicitly – shared conceptions. This paper intends to communicate the results and findings of an in-depth case-based exploration on the basis of ten design artefacts, using a specially developed conceptual framework. Furthermore, the aim was to draw conclusions concerning the benefits and potentials of this approach in the context of heritage-based architectural research in an academic environment.
keywords	iconic architecture; 3D modelling; design education
series	EAEA
email
last changed	2016/04/22 11:52

For more results click below: