Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 587

Reformat results as: short short into frame detailed detailed into frame

_id	acadia15_195
id	acadia15_195
authors	Belesky, Philip; Monacella, Rosalea; Burry, Mark; Burry, Jane
year	2015
title	A Field in Flux: Exploring the Application of Computational Design Techniques to Landscape Architectural Design Problems
doi	https://doi.org/10.52842/conf.acadia.2015.195
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 195-202
summary	Landscape architectural design problems are under-served by the current canon of computational design techniques. More investigations into modeling landscape phenomena would improve the capabilities of designers working in this field. This paper introduces some of the problems specific to the intersection of computational design and landscape architecture through a case study in generating planting plans using parametric techniques. This illustrates issues of temporality, complexity, and dynamism that distinguish land form from built form alongside the opportunities and challenges found in adapting computation to the design of natural systems.
keywords	Landscape modeling, ecological modeling, landscape architecture, systems design, environmental simulation
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2015_139
id	caadria2015_139
authors	Herr, Christiane M. and Ryan C. Ford
year	2015
title	Adapting Cellular Automata as Architectural Design Tools
doi	https://doi.org/10.52842/conf.caadria.2015.169
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 169-178
summary	In this paper we examine the adaptations cellular automata (CA) are typically subjected to when they are applied to architectural designing. We argue that, despite a number of earlier studies that portrayed CA as generic generative design tools, the transition from generic CA to specific design tools is not yet well understood. To describe this transition, we first examine this aspect in a number of previous studies relating CA to architectural design. In a following detailed analysis of an applied design case study, we trace similarities between findings made in the literature review to findings made in the case study and extend them with additional observations. We conclude with a summary of challenges and opportunities met by architectural designers employing and developing CA for design purposes.
keywords	Cellular automata; generative design; design research; design tools.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ijac201513104
id	ijac201513104
authors	Holzer, Dominik
year	2015
title	BIM and Parametric Design in Academia and Practice: The Changing Context of Knowledge Acquisition and Application in the Digital Age
source	International Journal of Architectural Computing vol. 13 - no. 1, 65–82
summary	This paper explores the consequences of the use of Building Information Modeling (BIM) and Parametric Design on contemporary architectural practice and associated changes to the roles and responsibilities therein. Knowledge changes associated to new skill-sets of young graduates and their positioning among experienced professionals will be analysed. On one hand the paper will scrutinise how the use of BIM and Parametric design challenges design and delivery of projects, on the other hand the paper will reflect on the extent academic institutions can or should respond to the challenges. What are the opportunities inherent to these changes in practice? How should they influence current academic curricula that include computational design and digital architecture? Based on targeted interviews with recent graduates who entered practice, a number of responses to the challenges and opportunities will be presented by the author for further consideration.
series	journal
last changed	2019/05/24 09:55

_id	sigradi2015_11.165
id	sigradi2015_11.165
authors	Ligler, Heather; Economou, Thanos
year	2015
title	Lost in Translation: Towards an Automated Description of John Portman’s Domestic Architecture
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 657-661.
summary	The prevalent mode of shape grammar output is a two-dimensional drawing grammar. For architectural applications, these two- dimensional shape rules can hold a variety of interpretations in three-dimensional space. This work translates an existing grammar from a manual two-dimensional drawing grammar to an automated three-dimensional building grammar to explore the challenges and opportunities that this translation suggests in the larger context of shape computation. The case study considered here is a grammar interpreting John Portman’s architectural language as defined by the house Portman identifies as emblematic of his design principles, his 1964 personal residence Entelechy I.
keywords	Shape Grammars, Shape Grammar Implementations, Formal Composition, Generative Systems
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	sigradi2015_12.297
id	sigradi2015_12.297
authors	Parra-Agudelo, Leonardo; Choi, Jaz Hee-Jeong
year	2015
title	Identifying Opportunity Spaces for Design Research in South America: Working with Grassroots and Community Groups
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 724-730.
summary	As design research continues to gain momentum in South America, design researchers and practitioners in the region have begun to consider how to the field may address regionally-specific issues, including on-going political struggles. By bringing approaches such as Participatory Design and Adversarial Design that consider political aspects of design, local researchers have explored various forms that these two approaches could take that are tailored to the needs and values of different communities across the region. This paper focuses on identifying opportunities for developing design research projects in community-based and grassroots-oriented contexts. The paper presents the findings of our study about the understanding and experience of design researchers and experts who have been working closely with community groups and grassroots organisations in South America. Five themes emerged, highlighting opportunities and challenges related to positioning contemporary design research in the region, integration of adversarial perspectives into design processes, leveraging local obstacles through creativity, and the potential of building capacity within community groups and grassroots organisations for sustainability and autonomy.
keywords	Design Research, South America, Interaction Design, Urban Informatics, Grassroots Communities
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	ecaade2015_287
id	ecaade2015_287
authors	Varela, Pedrode Azambuja and Sousa, Jose Pedro
year	2015
title	Digital Flow in Stone Heritage Buildings - The Nasoni Keystone Experiment
doi	https://doi.org/10.52842/conf.ecaade.2015.1.717
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 717-726
summary	In a moment when digital technologies can interfere in every moment and task in the architectural production, architects are using them in many different ways. In architectural heritage, stone is a prevalent material and one can find some examples of architects exploring particular uses of computers when facing this kind of challenges. However, it seems that there is a lack of references trying to develop a transversal reading of the context, by offering a systematisation of those approaches. With this concern, this paper wants to describe and illustrate the way digital technologies can support architectural intervention in stone heritage buildings, bearing the specificity of this material, its constraints and opportunities. For each moment, specific computer-based technologies can be employed not only to perform those tasks, but also, to assure the flux of information through a digital continuum. This paper overviews those moments by discussing the technologies available and presenting some examples from existing reference practices. To test those concepts and arguments, this paper includes the description and illustration of an experiment carried out in the Laboratory by the authors, of a digital continuum process from surveying a stone building, to design and fabrication.
wos	WOS:000372317300078
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=b1661030-702d-11e5-a8be-2fc2b39fc1bd
last changed	2022/06/07 07:58

_id	caadria2015_078
id	caadria2015_078
authors	Yanagawa, Kane
year	2015
title	Confluence of Parametric Design and Digital Fabrication Restructuring Manufacturing Industries
doi	https://doi.org/10.52842/conf.caadria.2015.013
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 13-22
summary	The positive consumer reception of 3D printed products suggests that the coupling of digital fabrication technology and parametric design methodologies presents opportunities and challenges to traditional modes of industrial manufacturing. This paper outlines the manner in which parametrically defined constraints of components within design hysteresis can be implemented to maintain conformation to real world constraints. The study challenged ten architectural designers to develop parametric definitions using conventional CAD software and visual programming languages to describe the geometric logic of a simple pendant lamp while permitting some consumer defined shape parameters. The assessment of submitted design descriptions suggests that defining such a system parametrically for manufacturing requires the development of an approach that is capable of not only intelligently managing interdisciplinary dependencies but also evaluating performance factors within implicit design space. During the next phase of this research, focus will be on the application of the proposed constrained design hysteresis methodology in collaboration with a major manufacturing industry partner to further develop and explore its potential in real world implementation. If proven effective, it can be expected that adoption of the combination of parametric design tools and digital fabrication among major manufacturing industries will be pervasive in the coming years.
keywords	Parametric design; digital fabrication; collaborative design; mass-customization; constrained design hysteresis
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	caadria2015_043
id	caadria2015_043
authors	Zboinska, Malgorzata A.
year	2015
title	Enriching Creativity in Digital Architectural Design
doi	https://doi.org/10.52842/conf.caadria.2015.819
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 819-828
summary	Although conceptual design is one of the most important stages of creation, impacting the quality and cost of the final product, current research indicates that designers still lack adequate tools supporting early-stage design. This research challenges that notion, by proposing a hybrid digital design platform for conceptual architectural design. The platform contains four miscellaneous techniques: animation, free-form modelling, associative parametric modelling and per-formance-driven modelling. In a digital design experiment we demon-strate that the collective application of these techniques to early-stage design explorations intensifies the architect’s visual and cognitive rea-soning processes, and hence supports the emergence of promising de-sign artefacts which bear the traces of all the techniques applied in the course of their conception. Additionally, the study also points at some other promising virtues of the hybrid toolset, including: provision of diversified form-finding opportunities on various levels of design ab-straction; the potential to direct designers onto unplanned creation paths; the ability to increase the versatility and functionality of the solutions; and the capacity to sustain design activities of various character, ranging from highly intuitive ones to very rational ones.
keywords	Conceptual design methods and tools; free-form modelling; animation; associative parametric modelling; performance-driven design.
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ecaade2015_122
id	ecaade2015_122
authors	Agirbas, Asli
year	2015
title	The Use of Digital Fabrication as a Sketching Tool in the Architectural Design Process - A Case Study
doi	https://doi.org/10.52842/conf.ecaade.2015.2.319
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 319-324
summary	Computer-aided manufacturing (CAM) technologies including computer numerically controlled (CNC) milling, laser cutting and 3D printing are becoming cheaper and globally more accessible. Accordingly, many design professionals, academics and students have been able to experience the benefits and challenges of using digital fabrication in their designs. The use of digital fabrication in the education of architecture students has become normal in many schools of architecture, and there is a growing demand for computer-aided manufacturing (CAM) logic and fabrication knowledge in student learning. Clearly, architecture students are acquiring material base-thinking, time management, production methods and various software skills through this digital fabrication. However, it appears to be the case that architecture students use digital fabrication mainly in the final stage of their design or in their finishing work. In this study, computer-aided manufacturing (CAM) technologies have been used as a sketch tool rather than simply for fabricating a final product in the architectural design process and the advantages of this educational practice are demonstrated.
wos	WOS:000372316000037
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=79005d78-6fe6-11e5-b555-13a7f78815dc
last changed	2022/06/07 07:54

_id	ecaade2024_35
id	ecaade2024_35
authors	Agkathidis, Asterios; Song, Yang; Symeonidou, Ioanna
year	2024
title	AI-Assisted Design: Utilising artificial intelligence as a generative form-finding tool in architectural design studio teaching
doi	https://doi.org/10.52842/conf.ecaade.2024.2.619
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 2, pp. 619–628
summary	Artificial Intelligence (AI) tools are currently making a dynamic appearance in the architectural realm. Social media are being bombarded by word-to-image/image-to-image generated illustrations of fictive buildings generated by tools such as ‘Midjourney’, ‘DALL-E’, ‘Stable Diffusion’ and others. Architects appear to be fascinated by the rapidly generated and inspiring ‘designs’ while others criticise them as superficial and formalistic. In continuation to previous research on Generative Design, (Agkathidis, 2015), this paper aims to investigate whether there is an appropriate way to integrate these new technologies as a generative tool in the educational architectural design process. To answer this question, we developed a design workflow consisting of four phases and tested it for two semesters in an architectural design studio in parallel to other studio units using conventional design methods but working on the same site. The studio outputs were evaluated by guest critics, moderators and external examiners. Furthermore, the design framework was evaluated by the students through an anonymous survey. Our findings highlight the advantages and challenges of the utilisation of AI image synthesis tools in the educational design process of an architectural design approach.
keywords	AI, GAI, Generative Design, Design Education
series	eCAADe
email
last changed	2024/11/17 22:05

_id	acadia15_263
id	acadia15_263
authors	Ahlquist, Sean
year	2015
title	Social Sensory Architectures: Articulating Textile Hybrid Structures for Multi-Sensory Responsiveness and Collaborative Play
doi	https://doi.org/10.52842/conf.acadia.2015.263
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 263-273
summary	This paper describes the development of the StretchPLAY prototype as a part of the Social Sensory Surfaces research project, focusing on the design of tactile and responsive environments for children with Autism Spectrum Disorder (ASD). The project is directed specifically at issues with sensory processing, the inability of the nervous system to filter sensory input in order to indicate an appropriate response. This can be referred to as a “traffic jam” of sensory data where the intensity of such unfiltered information leads to an over-intensified sensory experience, and ultimately a dis-regulated state. To create a sensory regulating environments, a tactile structure is developed integrating physical, visual and auditory feedback. The structure is defined as a textile hybrid system integrating a seamless knitted textile to form a continuous topologically complex surface. Advancements in the fabrication of the boundary structure, of glass-fiber reinforced rods, enable the form to be more robustly structured than previous examples of textile hybrid or tent-like structures. The tensioned textile is activated as a tangible interface where sensing of touch and pressure on the surface triggers ranges of visual and auditory response. A specific child, a five-year old girl with ASD, is studied in order to tailor the technologies as a response to her sensory challenges. This project is a collaboration with students, researchers and faculty in the fields of architecture, computer science, information (human-computer interaction), music and civil engineering, along with practitioners in the field of ASD-based therapies.
keywords	Textile Hybrid, Knitting, Sensory Environment, Tangible Interface, Responsive systems and environments
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2024_477
id	caadria2024_477
authors	Akbaylar Hayreter, Ipek, Gulec Ozer, Derya and As Cemrek, Handan
year	2024
title	Enhancing Cultural Heritage Digitalization and Visitor Engagement Through LiDAR Scanning and Gamification
doi	https://doi.org/10.52842/conf.caadria.2024.2.283
source	Nicole Gardner, Christiane M. Herr, Likai Wang, Hirano Toshiki, Sumbul Ahmad Khan (eds.), ACCELERATED DESIGN - Proceedings of the 29th CAADRIA Conference, Singapore, 20-26 April 2024, Volume 2, pp. 283–292
summary	Cultural heritage assets are valuable, providing important information about humanity's past and conveying it to the future. Unfortunately, conventional documentation is insufficient to preserve them for the next generations. Furthermore, increasing visitor interaction with these assets and raising awareness has been one of the challenges in this field. In this paper, we will examine how mobile LiDAR (Laser Detection and Ranging) technology can be used to precisely scan and document historical sites and how it can be combined with gamification elements to provide visitors with better experiences. It is also important that the texture taken in mobile laser scanning can be used to better visualize 3D mesh models of the scanned objects, so the fastest application that produces 3D models is selected. The study area is Syedra Ancient City in Alanya / Turkey, where the research and excavation process has continued since 2015 and the restoration projects started in 2023. Future work includes the creation of experiences to provide a basis for gamification and revitalizing the story of the heritage for the visitors through digital storytelling and AR (Augmented Reality). Preserving historical sites while providing visitors with a more in-depth, vivid and enjoyable experience are important facts for enhancing cultural heritage and passing it on to future generations.
keywords	Cultural Heritage, Digitalization, LiDAR, Mobile Laser Scanning, Digital Storytelling, Augmented Reality, Gamification
series	CAADRIA
email
last changed	2024/11/17 22:05

_id	caadria2015_202
id	caadria2015_202
authors	Amtsberg, Felix; Felix Raspall and Andreas Trummer
year	2015
title	Digital-Material Feedback in Architectural Design
doi	https://doi.org/10.52842/conf.caadria.2015.631
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 631-640
summary	This paper studies the architectural potential of the implementation of material feedback using computer vision before and during an automated fabrication process. The combination of an industrial robot and a 3D camera is used expand the typical one-way design and fabrication process (from a digital design to a physical output), to a feedback loop, where specific material information becomes the main trigger of design decisions and fabrication processes. Several projects developed by the authors and tested during a robotic workshop aim to unveil different aspects of material feedback in architectural design, opening a discussion for the benefit and challenges of this new approach to design and fabrication.
keywords	Material feedback; robotic fabrication; computer vision; digital workflow; robotic workshop;
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2015_13.316
id	sigradi2015_13.316
authors	Ariza, Inés; Gazit, Merav
year	2015
title	On-site Robotic Assembly of Double-curved Self-supporting Structures
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 746-753.
summary	Robotic assembly of architectural structures has been an area of research for a few decades. Yet, current methods impose a large number of constraints on the geometry of those structures. In this paper we introduce a method for robotic assembly that enables the construction of double curved self-supporting structures. Latest research challenges have focused on the assembly of sophisticated brick structures and on sensor feedback systems for handling accuracy. We propose an alternative strategy to tackle tolerance handling in complex structures that rely on geometry. The intelligence of the system lies in two main aspects: a subdivision technique that incorporates the robot’s constraints as well as the structural equilibrium of the structure during each step of assembly, in order to omit the use of scaffolding; and a match between geometric information and the robot’s movements in a robot programming environment. As a proof of concept, we fabricated a portion of a full-scale double-curved structure. The structure was assembled without scaffolding by a portable KUKA KR10 on a randomly picked site. This project aims to demonstrate an easy and simple method for robotic assembly that enables the realization of digitally generated complex geometries as concrete complex structures.
keywords	Robotic Assembly, Self-supporting Structure, On-site Assembly, Double Curvature, Construction Tolerances
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2015_77
id	ecaade2015_77
authors	Bialkowski, Sebastian and Kepczynska-Walczak, Anetta
year	2015
title	Engineering Tools Applied in Architecture - Challenges of Topology Optimization Implementation
doi	https://doi.org/10.52842/conf.ecaade.2015.1.261
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 261-268
summary	Computation, in the context of a digital designing process, is redefining architectural practice. Architects are developing new sets of tools which are dramatically changing the typical way of design procedure. The paper describes the research assumptions, problems and solutions proposition, aimed at creation of a real-time form finding tool for architects based on engineering methods. Through intersecting architectural form evaluation with engineering analysis and optimisation tools it is highly intended to offer the opportunity to variety of architects and designers to use the exceedingly complex and compound process for their design improvement. The form finding tool, to be effective and reliable, has to provide immediate feedback to a designer. This requirement enforces a software developer to use more sophisticated solutions. The paper focuses on possibilities of already known engineering procedures acceleration such as Finite Element Method or Topology Optimization for effective implementation in architectural design process.
wos	WOS:000372317300028
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=1337360e-702e-11e5-90b6-cbdace47c7fb
last changed	2022/06/07 07:52

_id	sigradi2015_3.111
id	sigradi2015_3.111
authors	Brand?o, Filipe; Paio, Alexandra; Sousa, José Pedro; Rato, Vasco
year	2015
title	Cork Re-Wall. Computational Methods of Automatic Generation and Digital Fabrication of Cork Partition Walls for Building Renovation
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 86-93.
summary	Developments in computational design methods and their integration with digital fabrication processes are ushering a customized fabrication paradigm. This paradigm is particularly suited to renovation of old buildings built with traditional construction techniques, a diversified corpus in which interventions are surgical and unique, and where partition walls play the central role. Insulation Cork Board and OSB, natural and renewable materials, can have an important role in a material system that responds to this context. Cork re-Wall is a parametrically modelled construction system and a file-to-factory digital process to generate high quality custom solutions to respond to diverse renovation design challenges.
keywords	Cork, Wood Frame, Digital Fabrication, Renovation, Parametric Design
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	caadria2017_031
id	caadria2017_031
authors	Crolla, Kristof, Williams, Nicholas, Muehlbauer, Manuel and Burry, Jane
year	2017
title	SmartNodes Pavilion - Towards Custom-optimized Nodes Applications in Construction
doi	https://doi.org/10.52842/conf.caadria.2017.467
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 467-476
summary	Recent developments in Additive Manufacturing are creating possibilities to make not only rapid prototypes, but directly manufactured customised components. This paper investigates the potential for combining standard building materials with customised nodes that are individually optimised in response to local load conditions in non-standard, irregular, or doubly curved frame structures. This research iteration uses as a vehicle for investigation the SmartNodes Pavilion, a temporary structure with 3D printed nodes built for the 2015 Bi-City Biennale of Urbanism/Architecture in Hong Kong. The pavilion is the most recent staged output of the SmartNodes Project. It builds on the findings in earlier iterations by introducing topologically constrained node forms that marry the principals of the evolved optimised node shape with topological constraints imposed to meet the printing challenges. The 4m high canopy scale prototype structure in this early design research iteration represents the node forms using plastic Fused Deposition Modelling (FDM).
keywords	Digital Fabrication; Additive Manufacturing; File to Factory; Design Optimisation; 3D printing for construction
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2015_92
id	ecaade2015_92
authors	Daher, Elie; Kubicki, Sylvain and Halin, Gilles
year	2015
title	A Parametric Process for Shelters and Refugees’ Camps Design
doi	https://doi.org/10.52842/conf.ecaade.2015.2.541
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 541-548
summary	Many situations related to natural environment and human activities increase the risk related to housing and create a demand for rapid post-disaster solutions. The solutions implemented by both the non-governmental organizations (NGOs) and the local and national organizations should fulfill the requirements of the temporarily displaced populations. However post-disaster design faces many challenges in its process making the response always more complex. At the same time, computer-based design is a growing approach in both architectural practice and research. The research described in this paper aims to help in finding solutions to design issues by addressing the potential of computer-based architectural design support. It is applied to shelter and camp development and takes into account physical, contextual and climatic parameters. The outcome is a design process for shelter and camp, which has been validated by a parametric prototype experiment in a case study. This should support humanitarian teams and contribute to enhancing the quality of design as well as to reducing the time required for the design and construction processes.
wos	WOS:000372316000061
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=02a874e6-6e90-11e5-8511-3bb4258a8962
last changed	2022/06/07 07:56

_id	cf2015_190
id	cf2015_190
authors	Datta, Sambit
year	2015
title	Accuracy and Ambiguity: Geometric reconstruction of a seventh century stone temple in Hanchey, Cambodia
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 190-202.
summary	Modeling the fragmented and heavily eroded remains of early temple architecture poses several challenges in accurate reconstruction of shape and form from digitally acquired datasets. This paper describes a collection of stepwise ad-hoc modeling methods that can re-assemble ambiguous and fragmentary evidence to provide a robust and empirical platform for the reconstruction of ruined temples. The paper presents the results of the method and the degree of accuracy and ambiguity in the acquisition, processing and reconstruction phases. A key aspect of the method is the maintenance of multiple “ground truths” from plural sources of partial evidence. Key findings of the paper demonstrate early results from the manipulation of geometric modeling primitives based on point collections, an advance in extending the classical tools of architectural analysis and comparison. The problem of accuracy and ambiguity in these methods and their algorithmic implementation is the subject of further investigation.
keywords	Digital data acquisition, flexible modeling, heritage reconstruction and visualization
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	ecaade2015_53
id	ecaade2015_53
authors	Duro-Royo, Jorge; Mogas-Soldevila, Laia and Oxman, Neri
year	2015
title	Physical Feedback Workflows in Fabrication Information Modeling (FIM) - Analysis and Discussion of Exemplar Cases across Media, Disciplines and Scales
doi	https://doi.org/10.52842/conf.ecaade.2015.2.299
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 299-307
summary	Novel digital fabrication platforms enable the design and construction of materially sophisticated structures with high spatial resolution in manufacturing. However, virtual-to-physical workflows and their associated software environments are yet to incorporate such capabilities. Our research sets the stage for seamless physical feedback workflows across media, disciplines and scales. We have coined the term Fabrication Information Modeling (FIM) to describe this approach. As preliminary methods we have developed four computational strategies for the design and digital construction of custom systems. These methods are presented in the context of specific design challenges and include a biologically driven fiber construction algorithm; an anatomically driven shell-to-wearable translation protocol; an environmentally-driven swarm printing system; and a manufacturing-driven hierarchical fabrication platform. We discuss and analyze these four challenges in terms of their capabilities to integrate design across media, disciplines and scales through concepts such as multi-dimensionality, media-informed computation and trans-disciplinary data.
wos	WOS:000372316000035
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=e41927e2-6fe7-11e5-a181-5b730dc456c4
last changed	2022/06/07 07:55

For more results click below: