Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 588

Reformat results as: short short into frame detailed detailed into frame

_id	cf2015_240
id	cf2015_240
authors	Aksoy, Yazgi Badem; Çagdas, Gülen and Balaban, Özgün
year	2015
title	A model for sustainable site layout design of social housing with Pareto Genetic Algorithm: SSPM
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 240.
summary	Nowadays as the aim to reduce the environmental impact of buildings becomes more apparent, a new architectural design approach is gaining momentum called sustainable architectural design. Sustainable architectural design process includes some regulations itself, which requires calculations, comparisons and consists of several possible conflicting objectives that need to be considered together. A successful green building design can be performed by the creation of alternative designs generated according to all the sustainability parameters and local regulations in conceptual design stage. As there are conflicting criteria's according to LEED and BREAM sustainable site parameters, local regulations and local climate conditions, an efficient decision support system can be developed by the help of Pareto based non-dominated genetic algorithm (NSGA-II) which is used for several possibly conflicting objectives that need to be considered together. In this paper, a model which aims to produce site layout alternatives according to sustainability criteria for cooperative apartment house complexes, will be mentioned.
keywords	Sustainable Site Layout Design, Multi Objective Genetic Algorithm, LEED-BREEAM.
series	CAAD Futures
type	normal paper
email
last changed	2015/06/29 09:30

_id	ecaade2015_28
id	ecaade2015_28
authors	Sommer, Bernhard; Moncayo, Galo, Sommer-Nawara, Malgorzata and Pont, Ulrich
year	2015
title	SolSeduction - A Phyto-Solar Dance-Floor
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 697-705
doi	https://doi.org/10.52842/conf.ecaade.2015.2.697
wos	WOS:000372316000077
summary	As climate and society change, customizing buildings towards specific usage patterns and local weather conditions that might be obsolete within a few years, does not seem to be the smartest approach to building design. Facing the end of readily available highly efficient energy sources, such as oil and gas, we want to re-think the architectural environment towards a symbiotic habitat. The role of energy thus is not seen as a question of supply, but as one parameter among others that shapes the environment. A habitat relies on the physical, chemical and social interaction of different elements and organisms.The authors together with their students pursued a design research re-thinking the architectural environment towards a symbiotic habitat.Full-scale spatial prototypes as elements of such a habitat have been developed focussing on the interfaces between climate, people and other organisms, such as plankton, algae and flowers.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=21b8b11a-6e91-11e5-b691-00190f04dc4c
last changed	2022/06/07 07:56

_id	caadria2015_126
id	caadria2015_126
authors	Aydin, Serdar and Marc Aurel Schnabel
year	2015
title	Fusing Conflicts Within Digital Heritage Through the Ambivalence of Gaming
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 839-848
doi	https://doi.org/10.52842/conf.caadria.2015.839
summary	Digital Heritage is amphibian by spanning between unreal-real (digital) and real-real (actual) environments. Or its amphiboly derives from a fact that relies not on contrasting realities but a hub from which an oscillation occurs between the real and the actual. Inferring to Baudrillard’s criticism of contemporary art, this paper presents these disparities and ambivalent conditions found in digital heritage by examining a full-dome media-art application called Look-Up. Touching upon the authenticity issue in cultural heritage, a design research project, Augmenting Kashgar, is then introduced on the basis of the claim that a design manner can fuse conflicts within Digital Heritage. Developed within the special context of Kashgar, China’s westernmost city, the methodology of the project that follows a Research through Design (RtD) approach is provided. Making use of the architectural features of Kashgar, designing a digital game as a counter-strategy to existing cultural heritage programmes is discussed with references to Baudrillard’s perspective on video games and gamers.
keywords	Digital Heritage; Research through Design; game design; Augmenting Kashgar Project; Baudriallard.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2015_170
id	ecaade2015_170
authors	Cavusoglu, Ömer Halil
year	2015
title	The Position of BIM Tools in Conceptual Design Phase: Parametric Design and Energy Modeling Capabilities
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 607-612
doi	https://doi.org/10.52842/conf.ecaade.2015.1.607
wos	WOS:000372317300065
summary	Numerous researchers point out that, in the early stages of architectural design, many significant decisions are taken to directly affect functional qualities, the performance of the building, aesthetics, and the relationship of the building with the natural environment and climate, even if there is no certain and valid information to create and obtain adequate design.In this paper, I particularly focus on the early stages of architectural design and search for the opportunities provided by Building Information Modeling (BIM) tools, towards the concept of performance analysis and parametric form seeking. Study also includes case study implementations which visualize the early processes of architectural design with benefits of BIM under different conditions to evaluate its opportunities during these design processes.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2015_220
id	caadria2015_220
authors	Cheng, Nancy Y.; Mehrnoush Latifi Khorasgani, Nicholas Williams, Daniel Prohasky and Jane Burry
year	2015
title	Understanding Light in Building Skin Design
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 323-332
doi	https://doi.org/10.52842/conf.caadria.2015.323
summary	This paper describes a design approach for discerning solar gain and assigning appropriate external shading devices. The approach includes a macro analysis locating where and when the building receives direct sunlight and locating desired interior daylighting; along with a micro analysis of how folded sun-shading motifs filter or block direct sunlight. The approach uses a collaborative analytical workflow with feedback from virtual and physical simulations informing design explorations. This iterative, reciprocating process is illustrated by student efforts to design shading structures for a building based on incident solar radiation. Designers begin with cutting and folding paper study models, then lasercut 2D tessellation patterns to create sculptural shading screens to be examined with a heliodon. Physical daylighting modeling reveals aesthetic opportunities to develop with parametric design. Motifs are then digitally modeled and analysed for shading effectiveness. Analysing the solar radiation of simple motifs helps beginners learn the software for subsequent urban situations. The efficacy of these simulations is discussed along with ways that the results could be interpreted to initiate design decisions for a building skin.
keywords	Solar simulation; collaborative design; folding surfaces; physical and digital simulation.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaaderis2018_103
id	ecaaderis2018_103
authors	Davidová, Marie and Prokop, Šimon
year	2018
title	TreeHugger - The Eco-Systemic Prototypical Urban Intervention
source	Odysseas Kontovourkis (ed.), Sustainable Computational Workflows [6th eCAADe Regional International Workshop Proceedings / ISBN 9789491207143], Department of Architecture, University of Cyprus, Nicosia, Cyprus, 24-25 May 2018, pp. 75-84
keywords	The paper discusses co-design, development, production, application of TreeHugger (see Figure 1). The co-design among community and trans-disciplinary participants with different expertise required scope of media mix, switching between analogue, digital and back again. This involves different degrees of physical and digital 'GIGA-Mapping' (Sevaldson, 2011, 2015), 'Grasshopper3d' (Davidson, 2017) scripting and mix of digital and analogue fabrication to address the real life world. The critical participation of this 'Time-Based Design' (Sevaldson, 2004, 2005) process is the interaction of the prototype with eco-systemic agency of the adjacent environment - the eco-systemic performance. The TreeHugger is a responsive solid wood insect hotel, generating habitats and edible landscaping (Creasy, 2004) on bio-tope in city centre of Prague. To extend the impact, the code was uploaded for communities to download, local-specifically edit and apply worldwide. Thus, the fusion of discussed processes is multi-scaled and multi-layered, utilised in emerging design field: Systemic Approach to Architectural Performance.
series	eCAADe
email
last changed	2018/05/29 14:33

_id	cf2015_328
id	cf2015_328
authors	Gamez, Oscar; Bignon, Jean-Claude and Duchanois, Gilles
year	2015
title	Assisted construction of non-standard wooden walls and envelope structures by parametric modeling
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 328.
summary	We introduce a parametric modeling method in the field of computer-aided architectural conception, which aims to produce non-standard wooden walls and envelopes with CNC machinery. This method explores the application of polygonal cellular structures (as patterns) on facade and envelope interventions for new and old projects. We innovate by bringing the 3D production environment complexity into the conception model to improve the production of manifold woodworking items by CNC (Computer Numerical Control) 3D fabrication. A recent experimentation, tests the entire workflow from parametric modeling to production of two full-scale prototypes. The results prove the range of inputs offered by the method to be functional, though it needs various improvements in order to optimize parametric modeling and digital fabrication procedures. Future research will focus on treating a wider range of joints via parametric modeling and deal with joint creation regardless wall deformation to expand the morphological approach of non-standard wooden walls design.
keywords	Non-standard walls, Computer-aided architectural design, Wood construction, Parametric modeling, CNC fabrication, Mass customization.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	caadria2015_010
id	caadria2015_010
authors	Gámez, Oscar; Jean-Claude Bignon and Gilles Duchanois
year	2015
title	Assisted Construction of Non-Standard Wooden Walls and Envelope Structures by Parametric Modeling
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 653-662
doi	https://doi.org/10.52842/conf.caadria.2015.653
summary	The non-standard approach, widely discussed in the past years as Architecture progressively uses alternative design methods different from the Euclidean paradigm, has allowed architects to transform the way architecture is conceived and materialized. Such evolution uses computer-aided design along with automation in production to originate the environment for the aided architectural conception field in which we present a method, in its early development stage, intended to create non-standard walls and envelopes based on cellular patterns using wood as base material. We present the results obtained from modeling and building two full-scale prototypes of non-standard wooden walls.
keywords	Non-standard walls; parametric modeling; CNC fabrication; cellular structures; wood construction.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	caadria2015_033
id	caadria2015_033
authors	Hadilou, Arman
year	2015
title	Phototropism of Tensile Façade System through Material Agency
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 127-136
doi	https://doi.org/10.52842/conf.caadria.2015.127
summary	This paper researches material agencies, mechanical systems and façade designs that are able to respond to environmental changes through local interactions, inspired by biological systems. These are based on a model of distributed intelligence founded on plants and animal collectives, from which intelligent behavior emerges through simple local associations. Biological collective systems integrate material form and responsiveness and have the potential to inform new architectural and engineering strategies. The design approach of this research is based on a data-driven methodology spanning from design inception to simulation and physical modeling. Data-driven models, common in the fields of natural science, offer a method to generate and test a multiplicity of responsive solutions. The driving concepts are three types of evolutionary adaptation: flexibility, acclimation, and learning. The proposed façade system is a responsive textile shading structure which uses integrated actuators that moderate their local environments through simple interactions with their immediate neighbors. Computational techniques coupled to material logics create an integral design framework leading to heterogeneous environmental and structural conditions, producing local responses to environmental stimuli and ultimately effective performance of the whole system.
keywords	Responsive facade; phototropism; material intelligence.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	acadia15_371
id	acadia15_371
authors	Hatefnia, Navid; Ghobad, Marjan
year	2015
title	Computing Outdoor Comfort Based on CBE Thermal Comfort Calculation for Ashrae-55
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 371-480
doi	https://doi.org/10.52842/conf.acadia.2015.371
summary	Environmental analysis as part of the initial design process, affords precise consideration of the bioclimatic human conditions within the environmental local context. The daily growth in inter alia knowledge of effective parameters in environmental conditions, quality weather data, human thermo-physiology studies – all contribute to improving the potential for achieving a relatively accurate analyses of environmental conditions by overlaying and computing all the climatic and thermo-physiological data. This paper describes a digital method for examining different points in the same context by computing all the input data available to understand the corresponding human comfort condition levels, thus leading to better decision-making at early design stages. Information about the site, climate, human thermo-physiology and behavioral aspects among others are collected where each data parameter is matched and analyzed to the context of every node on the model through a series of specific computational algorithms. Thereafter, the data from the nodes are statistically cleaned, classified and integrated based on the CBE thermal comfort calculation for ASHRAE-55. The results obtained using this method, can be tailored according to the desired outcomes. The proposed method identifies effective factors for human comfort condition improvement for different points on the context. It also provides a means to priorities specific parameters so that they can be manipulated for optimal digital design solutions, ie. Aligned to the desired conditions in the specific parts of the site with the aim of optimize outdoor space usage.
keywords	Micro-Climate, Outdoor Comfort, Urban Design, Environmental Aspects, Bio-Climatic Conditions
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:49

_id	ecaade2015_265
id	ecaade2015_265
authors	Hosey, Shannon; Beorkrem, Christopher, Damiano, Ashley, Lopez, Rafael and McCall, Marlena
year	2015
title	Digital Design for Disassembly
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 371-382
doi	https://doi.org/10.52842/conf.ecaade.2015.2.371
wos	WOS:000372316000043
summary	The construction and building sector is now widely known to be one of the biggest energy consumers, carbon emitters, and creators of waste. Some architectural agendas for sustainability focus on energy efficiency of buildings that minimize their energy intake during their lifetime - through the use of more efficient mechanical systems or more insulative wall systems. One issue with these sustainability models is that they often ignore the hierarchy of energy within architectural design. The focus on the efficiency is but one aspect or system of the building assembly, when compared to the effectiveness of the whole, which often leads to ad-hoc ecology and results in the all too familiar “law of unintended consequences” (Merton, 1936). As soon as adhesive is used to connect two materials, a piece of trash is created. If designers treat material as energy, and want to use energy responsibly, they can prolong the lifetime of building material by designing for disassembly. By changing the nature of the physical relationship between materials, buildings can be reconfigured and repurposed all the while keeping materials out of a landfill. The use of smart joinery to create building assemblies which can be disassembled, has a milieu of new possibilities created through the use of digital manufacturing equipment. These tools afford designers and manufacturers the ability to create individual joints of a variety of types, which perform as well or better than conventional systems. The concept of design for disassembly is a recognizable goal of industrial design and manufacturing, but for Architecture it remains a novel approach. A classic example is Kieran Timberlake's Loblolly House, which employed material assemblies “that are detailed for on-site assembly as well as future disassembly and redeployment” (Flat, Inc, 2008). The use of nearly ubiquitous digital manufacturing tools helps designers create highly functional, precise and effective methods of connection which afford a building to be taken apart and reused or reassembled into alternative configurations or for alternative uses. This paper will survey alternative energy strategies made available through joinery using digital manufacturing and design methods, and will evaluate these strategies in their ability to create diassemblable materials which therefore use less energy - or minimize the entropy of energy over the life-cycle of the material.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=4075520a-6fe7-11e5-bcc8-f7d564ea25ed
last changed	2022/06/07 07:50

_id	acadia15_137
id	acadia15_137
authors	Ireland, Tim
year	2015
title	A Cell-Inspired Model of Configuration
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 137-148
doi	https://doi.org/10.52842/conf.acadia.2015.137
summary	This paper presents a bottom-up approach to organising architectural-space, which offers a fresh outlook on the automatic generation of architectural layouts. Artificial creatures, modelled on Eukaryotic cells, are used as components with which to generate configurations articulating patterns of habitation. These components represent discrete activities. Activity is perceived to be the basic building block of spatial configuration in architecture. Attributes, pertaining to input and outputs, establish activities as occurring in chains of action; affected by that which has preceded and affecting that which is to transpire. Being artificial creatures these activity-components have the capacity to interact with their environment and each other, and self-organise to form aggregations. The model demonstrates an ecological approach to designing in a manner that unites computational design with biological and semiotic theory. The theoretical basis of the model is first outlined, and then the computer model is presented and described.
keywords	Agents, Artificial Life, Configuration, Spatial Organisation, Behaviour of Organisms, Activity Diagrams
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	ecaade2015_227
id	ecaade2015_227
authors	Ireland, Tim
year	2015
title	An Artificial Life Approach to Configuring Architectural Space
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 581-590
doi	https://doi.org/10.52842/conf.ecaade.2015.2.581
wos	WOS:000372316000065
summary	This paper presents a method of configuring architectural space that articulates the coupling of an organism with its environment; expressing the spatiality of unfolding engagement in the world. The premise is that space is a consequence of cohesion, effected through constraints and processes of enaction. An Artificial Life model is presented as an analogue of a bottom-up approach to architectural design that takes into account that we as organisms interact with our ever present changing environment and redefine our spatial domain depending on our sensory interaction with said environment.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	caadria2015_157
id	caadria2015_157
authors	Janssen, Patrick
year	2015
title	Parametric BIM Workflows
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 437-446
doi	https://doi.org/10.52842/conf.caadria.2015.437
summary	Building Information Modelling systems enable the creation of associative parametric models that include sets of interlinked parametric objects. Graph-based modelling systems on the other hand enable the creation of parametric models with more complex iterative behaviours. Parametric BIM workflows aim to link graph-based systems to BIM systems. A key requirement of such workflows is the ability to generate associative BIM models. However, current approaches to creating such workflows are complicated by the fact that the process of cooking is only able to generate explicit geometry. An alternative approach is proposed in which the cooking process is able to generate associative models, thereby enabling more user friendly and streamlined BIM workflows to be created.
keywords	Building Information Modelling, Parametric modelling, BIM workflows
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2015_221
id	ecaade2015_221
authors	Junk, Stefan and Matt, Rebecca
year	2015
title	Workshop Digital Manufacturing - A New and Practical Approach to Combine CAAD and Digital Manufacturing in Architectural Design Education
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 103-110
doi	https://doi.org/10.52842/conf.ecaade.2015.2.103
wos	WOS:000372316000013
summary	The opportunities for the use of Digital Manufacturing in the field of architecture have increased tremendously over the past years. Today, already a large variety of methods and processes are used for the production of architectural models or even prototypes and design models. By now, this new technology has also become firmly established in the education of students. In this context, especially the theoretical basics of digital manufacturing, that is to say the integration of CAAD with the manufacturing process, and the special characteristics of the additive manufacturing, i.e. assembly in layers, are taught. As a demonstration of the practical application of the new technology of 3D printing, this paper will focus on the Workshop Digital Manufacturing. Due to the new approach of this workshop, which relies on the assembly of a 3D printer from an assembly kit, the students gain profound insights into the technology and functionality of 3D printers. In a next step, the students realize various models with the 3D-printer and in doing so develop design guidelines for additive manufacturing autonomously.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=52a83db6-6fe7-11e5-992c-a7fd95009077
last changed	2022/06/07 07:52

_id	cf2015_484
id	cf2015_484
authors	Liao, Kai; Vries, Bauke de; Kong, Jun and Zhang, Kang
year	2015
title	Pattern, cognition and spatial information processing: Representations of the spatial layout of architectural design with spatial-semantic analytics
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 484.
summary	In this paper, we review and extend the idea of Alexander’s “pattern language”, especially from the viewpoints of complexity theories, information systems, and human-computer interaction, to explore spatial cognition-based design representations for “intelligent and adaptive/interactive environment” in architecture and urban planning. We propose a theoretic framework of design patterns “with spatial information processing”, and attempt to incorporate state-of-the-art computational methods of information visualization/visual analytics into the conventional CAAD approaches. Focused on the spatial-semantic analytics, together with abstract syntactic pattern representation, by using “spatial-semantic aware” graph grammar formalization, i.e., Spatial Graph Grammars (SGG), the relevant models, algorithms and tool are proposed. We testify our theoretic framework and computational tool VEGGIE (a Visual Environment of Graph Grammar Induction Engineering) by using actual architectural design works (spatial layout exemplars of a small office building and the three house projects by Frank Lloyd Wright) as study cases, so as to demonstrate our proposed approach for practical applications. The results are discussed and further research is suggested.
keywords	Pattern language, complex adaptive systems, spatial cognition, design representations, spatial information processing, Artificial Intelligence, visual language, Spatial Graph Grammars (SGG), spatial-semantic analytics.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	cf2015_325
id	cf2015_325
authors	Lo, Tian Tian; Schnabel, Marc Aurel and Gao, Yan
year	2015
title	ModRule: A user-centric mass housing design platform
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 325.
summary	This paper presents a novel platform, ModRule, designed and developed to promote and facilitate collaboration between architects and future occupants during the design stage of mass housing buildings. Architects set the design-framework and parameters of the system, which allows the users to set their space requirements, budgets, etc., and define their desired way of living. The system utilizes gamification methodologies as a reference to promote incentives and user-friendliness for the layperson who has little or no architectural background. This enhanced integration of a both bottom-up approach (user-centric/player) with a top-down approach (architect-centric/game-maker) will greatly influence how architects design high rise living. By bridging the gap between the architect and the user, this development aims to instill a greater sense of belonging to people, as well as providing architects with a better understanding of how to give people more control over their living spaces. The paper also presents an evaluation of a design process that employed ModRule.
keywords	Mass housing, collaborative design, participatory system.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	caadria2015_102
id	caadria2015_102
authors	Loh, Paul
year	2015
title	Articulated Timber Ground, Making Pavilion as Pedagogy
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 23-32
doi	https://doi.org/10.52842/conf.caadria.2015.023
summary	Designing and making a pavilion within a studio setting has been undertaken by various educators and researchers as a valuable pedagogy in the past 10 years. It aims to construct a collaborative environment that allows students to develop an integrated approach to learning; through association, teamwork and creative collaboration. Usually the tacit knowledge applied and acquired through making, and the knowledge of design strategy and analysis are separated in the way they are taught; it is often difficult to integrate these within the same coursework which often leads to students using digital software and fabrication tools as problem solving devices. This paper looks at an integrated approach to learning computational design and digital fabrication through the making of a pavilion by a Master level design studio. The paper discusses the pedagogy of making through creative collaboration and integrated workflow. It focuses on the use of digital and physical prototypes as devices to stimulate an oscillating dialogue between problem solving and puzzle making; a counterpoint for students to develop and search for new knowledge in order to create personalised learning experience. The paper concludes with an examination on the limits of digital prototype when interfaced with physical environment.
keywords	Digital Fabrication; Collaborative Design; Design Workflow; Pedagogy, File to Production
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2015_127
id	ecaade2015_127
authors	Marcos, Carlos L. and Fernández, AngelJ
year	2015
title	Spacing Time - Engaging Temporality in the Realm of Architectural Space
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 613-622
doi	https://doi.org/10.52842/conf.ecaade.2015.2.613
wos	WOS:000372316000068
summary	The paper is a theoretical approach regarding digital architecture, performance and time. It tries to reflect on the philosophical taxonomy of time -cosmological, phenomenological and narrative- and how digitally conscious architectural design developed by architects, media artists, engineers and multidisciplinary teams address the engagement of the architectural space in real-time. The traditional static conception of architecture is altered through performativity and the ideals of permanence and endurance radically questioned. The research also constitutes a reflection on interaction, participation and performance in an ample sense with regard to performative architecture and some urban implications it may entail. Various examples addressing these topics mainly installed or built during the last decade exemplify the different issues that the paper reflects on. A critical reading of the installations and the intelligent-façades commented is posed to the reader together with the conceptual implications the different performative approaches involve and the goals they may achieve. The question remains if buildings instead of being or meaning should, more than ever, perform.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=5a611bf8-693a-11e5-b815-00190f04dc4c
last changed	2022/06/07 07:59

_id	ecaade2015_172
id	ecaade2015_172
authors	Mark, Earl and Zita Ultmann
year	2015
title	Environmental Footprint Design Tool - Exchanging GIS and CAD Data in Real Time
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 217-223
doi	https://doi.org/10.52842/conf.ecaade.2015.1.217
wos	WOS:000372317300023
summary	The pairing of CAD and GIS data creates an opportunity to connect an architectural design process more immediately with its environmental constraints. Yet the GIS data may be too overwhelmingly complex to be fully used in CAD without computer-assisted methods of highlighting relevant information. This paper reports on the implementation of an integrated environment for three-dimensional design geometrical modeling and obtaining environmental impact feedback. The project focused on enhancements to the data exchange and on the development of a related set of tools. While the technologies of CAD and GIS may rely on separate representational models,in combination they can provide a more complete view of the built and natural environment. The challenge in integration is that of bridging analytical methods and database formats used in the two technologies. Our approach is rooted in part in constraint based design methods well established in CAD (e.g., Sketchpad, Generative Components, CATIA). Within such CAD systems geometrical transformations may be intentionally constrained to help enforce some previously made design decisions. Although this current implementation modestly relates to geometrical constraints, the use of probabilistic risk values is more central to its methodology.
series	eCAADe
email
last changed	2022/06/07 07:59

For more results click below: