Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 561

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2018_243
id	ecaade2018_243
authors	Gardner, Nicole
year	2018
title	Architecture-Human-Machine (re)configurations - Examining computational design in practice
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 139-148
doi	https://doi.org/10.52842/conf.ecaade.2018.2.139
summary	This paper outlines a research project that explores the participation in, and perception of, advanced technologies in architectural professional practice through a sociotechnical lens and presents empirical research findings from an online survey distributed to employees in five large-scale architectural practices in Sydney, Australia. This argues that while the computational design paradigm might be well accepted, understood, and documented in academic research contexts, the extent and ways that computational design thinking and methods are put-into-practice has to date been less explored. In engineering and construction, technology adoption studies since the mid 1990s have measured information technology (IT) use (Howard et al. 1998; Samuelson and Björk 2013). In architecture, research has also focused on quantifying IT use (Cichocka 2017), as well as the examination of specific practices such as building information modelling (BIM) (Cardoso Llach 2017; Herr and Fischer 2017; Son et al. 2015). With the notable exceptions of Daniel Cardoso Llach (2015; 2017) and Yanni Loukissas (2012), few scholars have explored advanced technologies in architectural practice from a sociotechnical perspective. This paper argues that a sociotechnical lens can net valuable insights into advanced technology engagement to inform pedagogical approaches in architectural education as well as strategies for continuing professional development.
keywords	Computational design; Sociotechnical system; Technology adoption
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2015_130
id	ecaade2015_130
authors	Asl, Mohammad Rahmani; Stoupine, Alexander, Zarrinmehr, Saied and Yan, Wei
year	2015
title	Optimo: A BIM-based Multi-Objective Optimization Tool Utilizing Visual Programming for High Performance Building Design
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 673-682
doi	https://doi.org/10.52842/conf.ecaade.2015.1.673
wos	WOS:000372317300073
summary	Within the architecture, engineering, and construction (AEC) industry, the application of multidisciplinary optimization methods has been shown to reach significant improvements in building performance compared to conventional design methods. As a result, the use of multidisciplinary optimization in the process of design is growing and becoming a common method that provides desired performance feedback for decision making. However, there is a lack of BIM-based multidisciplinary optimization tools that use the rich information stored in Building Information Models (BIM) to help designers explore design alternatives across multiple competing design criteria. In this paper we introduce Optimo, an open-source visual programming-based Multi-Objective Optimization (MOO) tool, which is developed to parametrically interact with Autodesk Revit for BIM-based optimization. The paper details the development process of Optimo and also provides the initial validation of its results using optimization test functions. Finally, strengths, limitations, current adoption by academia and industry, and future improvements of Optimo for building performance optimization are discussed.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2015_10.381
id	sigradi2015_10.381
authors	Barros, Diana Rodríguez; Mandagarán, María; Nigro, Paola; Hernández, María Inés
year	2015
title	Design Thinking, Visual narratives and Creativity. Case teaching practices in disruptive postdigitals environments
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 618-622.
summary	From the perspective of Design Thinking, we present a case of teaching practice focused on the moments of ideation, design and production of graphics database in postdigitales environments. We were interested to investigate nontraditional modalities for the representation and communication of works in Architecture; develop and optimize working methods of digital image processing; create and manage visual narratives, near the transmedia storytelling, as a teaching resource facilitator of learning construction of meaning. Also, as indicators of creativity, analyzing such experience framed studies EMIDA Research Group (CEAC) CIPADI FAUD UNMdP, Argentina.
keywords	Design Thinking, Visual Narratives, Creativity, Disruptive Practice, Postdigital
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2015_120
id	ecaade2015_120
authors	Daoud, Bassam and Voordouw, Johan
year	2015
title	Making Machines that Make Buildings - Constructing a Mobile 3D Printer for Concrete Elements
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 355-359
doi	https://doi.org/10.52842/conf.ecaade.2015.2.355
wos	WOS:000372316000041
summary	This paper is both a fundamental and applied study of the multi-faceted design and fabrication issues related to the construction of a mobile 3D printer. The paper signifies the halfway point in a project initiated at the Azrieli School of Architecture and Urbanism at Carleton University starting in 2013. The printer, entitled 3DB, intends to print concrete elements for the Architecture, Engineering and Construction industry. The printer frame was designed to fit within the bed of a typical half-ton pick up truck or contract trailer. The paper describes the design, simulation and construction of the steel frame, gantry and extruder and makes speculation on future research including improved design of the extruder and nozzle mechanism.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2015_sp_10.179
id	sigradi2015_sp_10.179
authors	Espinoza, Verónica Paola Rossado; Torres, Daniel Antonio Serrano
year	2015
title	Scientific Approach to the Project in a Computational Perspective of Architecture: The Hochschule für Gestaltung-Ulm and its Diaspora
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 818-822.
summary	BIM methodology is a process that make possible to integrate the construction project on a 3D model. It contains the necessary information, optimizing stages, allowing early analysis and product virtualization. This methodology, reduces the time of implementation, anticipates the decisions making and improves productivity. The project requires the coordination of various professionals such as architects, civil, electrical, structural engineers, contractors and administrators, who needs specialized teaching by experts in BIM methodology. There are few professionals who are truly qualified to lead or carry out an entirely project whit this methodology.
series	SIGRADI
email
last changed	2016/03/10 09:51

_id	cf2015_324
id	cf2015_324
authors	Gerber, David Jason; Pantazis, Evangelos and Marcolino, Leandro Soriano
year	2015
title	Design Agency: Prototyping Multi-Agent Systems in Architecture
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 324.
summary	This paper presents research on the prototyping of multi-agent systems for architectural design. It proposes a design exploration methodology at the intersection of architecture, engineering, and computer science. The motivation of the work includes exploring bottom up generative methods coupled with optimizing performance criteria including for geometric complexity and objective functions for environmental, structural and fabrication parameters. The paper presents the development of a research framework and initial experiments to provide design solutions, which simultaneously satisfy complexly coupled and often contradicting objectives. The prototypical experiments and initial algorithms are described through a set of different design cases and agents within this framework; for the generation of façade panels for light control; for emergent design of shell structures; for actual construction of reciprocal frames; and for robotic fabrication. Initial results include multi-agent derived efficiencies for environmental and fabrication criteria and discussion of future steps for inclusion of human and structural factors.
keywords	Generative Design, Parametric Design, Multi-Agent Systems, Digital Fabrication, Form Finding, Reciprocal Frames.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	caadria2016_787
id	caadria2016_787
authors	Knapp, Chris; Jonathan Nelson, Andrew Kudless and Sascha Bohnenberger
year	2016
title	Lightweight material prototypes using dense bundled systems to emulate an ambient environment
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 787-796
doi	https://doi.org/10.52842/conf.caadria.2016.787
summary	This paper describes and reflects upon a computational de- sign and digital fabrication research project that was developed and implemented over 2014-2015, with subsequent development continu- ing for applications at present. The aim of the research was to develop methods of modelling, analysis, and fabrication that facilitate integra- tive approaches to architectural design and construction. In this con- text, the development of material prototypes, digital simulations, and parametric frameworks were pursued in parallel in order to inform and reform successive iterations throughout the process, leading to a re- fined workflow for engineering, production, and speculation upon fu- ture directions of the work.
keywords	Digital fabrication; biomimicry; ambient environments; grasshopper; computational design
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	sigradi2023_416
id	sigradi2023_416
authors	Machado Fagundes, Cristian Vinicius, Miotto Bruscato, Léia, Paiva Ponzio, Angelica and Chornobai, Sara Regiane
year	2023
title	Parametric environment for internalization and classification of models generated by the Shap-E tool
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1689–1698
summary	Computing has been increasingly employed in design environments, primarily to perform calculations and logical decisions faster than humans could, enabling tasks that would be impossible or too time-consuming to execute manually. Various studies highlight the use of digital tools and technologies in diverse methods, such as parametric modeling and evolutionary algorithms, for exploring and optimizing alternatives in architecture, design, and engineering (Martino, 2015; Fagundes, 2019). Currently, there is a growing emergence of intelligent models that increasingly integrate computers into the design process. Demonstrating great potential for initial ideation, artificial intelligence (AI) models like Shap-E (Nichol et al., 2023) by OpenAI stand out. Although this model falls short of state-of-the-art sample quality, it is among the most efficient orders of magnitude for generating three-dimensional models through AI interfaces, offering practical balance for certain use cases. Thus, aiming to explore this gap, the presented study proposes an innovative design agency framework by employing Shap-E connected with parametric modeling in the design process. The generation tool has shown promising results; through generations of synthetic views conditioned by text captions, its final output is a mesh. However, due to the lack of topological information in models generated by Shap-E, we propose to fill this gap by transferring data to a parametric three-dimensional surface modeling environment. Consequently, this interaction's use aims to enable the transformation of the mesh into quantifiable surfaces, subject to collection and optimization of dimensional data of objects. Moreover, this work seeks to enable the creation of artificial databases through formal categorization of parameterized outputs using the K-means algorithm. For this purpose, the study methodologically orients itself in a four-step exploratory experimental process: (1) creation of models generated by Shap-E in a pressing manner; (2) use of parametric modeling to internalize models into the Grasshopper environment; (3) generation of optimized alternatives using the evolutionary algorithm (Biomorpher); (4) and classification of models using the K-means algorithm. Thus, the presented study proposes, through an environment of internalization and classification of models generated by the Shap-E tool, to contribute to the construction of a new design agency methodology in the decision-making process of design. So far, this research has resulted in the generation and classification of a diverse set of three-dimensional shapes. These shapes are grouped for potential applications in machine learning, in addition to providing insights for the refinement and detailed exploration of forms.
keywords	Shap-E, Parametric Design, Evolutionary Algorithm, Synthetic Database, Artificial Intelligence
series	SIGraDi
email
last changed	2024/03/08 14:09

_id	ecaade2015_73
id	ecaade2015_73
authors	Patlakas, Panagiotis; Livingstone, Andrew and Hairstans, Robert
year	2015
title	A BIM Platform for Offsite Timber Construction
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 597-604
doi	https://doi.org/10.52842/conf.ecaade.2015.1.597
wos	WOS:000372317300064
summary	This paper discusses the potential of a BIM platform for offsite timber construction within the context of the UK construction industry. It examines the benefits, limitations, and challenges that BIM brings for offsite timber. Proof-of-concept projects are presented that deal with the architectural technology, structural engineering, and life cycle analysis aspects. These demonstrate the feasibility of the development of an open BIM platform which would establish a common standard for the industry. The paper concludes by suggesting an alternative business model for offsite timber construction, as enabled by Building Information Modelling.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=7ea6b1fa-7022-11e5-ae05-00190f04dc4c
last changed	2022/06/07 07:59

_id	acadia23_v3_71
id	acadia23_v3_71
authors	Vassigh, Shahin; Bogosian, Biayna
year	2023
title	Envisioning an Open Knowledge Network (OKN) for AEC Roboticists
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 3: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-1-0]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 24-32.
summary	The construction industry faces numerous challenges related to productivity, sustainability, and meeting global demands (Hatoum and Nassereddine 2020; Carra et al. 2018; Barbosa, Woetzel, and Mischke 2017; Bock 2015; Linner 2013). In response, the automation of design and construction has emerged as a promising solution. In the past three decades, researchers and innovators in the Architecture, Engineering, and Construction (AEC) fields have made significant strides in automating various aspects of building construction, utilizing computational design and robotic fabrication processes (Dubor et al. 2019). However, synthesizing innovation in automation encounters several obstacles. First, there is a lack of an established venue for information sharing, making it difficult to build upon the knowledge of peers. First, the absence of a well-established platform for information sharing hinders the ability to effectively capitalize on the knowledge of peers. Consequently, much of the research remains isolated, impeding the rapid dissemination of knowledge within the field (Mahbub 2015). Second, the absence of a standardized and unified process for automating design and construction leads to the individual development of standards, workflows, and terminologies. This lack of standardization presents a significant obstacle to research and learning within the field. Lastly, insufficient training materials hinder the acquisition of skills necessary to effectively utilize automation. Traditional in-person robotics training is resource-intensive, expensive, and designed for specific platforms (Peterson et al. 2021; Thomas 2013).
series	ACADIA
type	field note
email
last changed	2024/04/17 13:59

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
doi	https://doi.org/10.52842/conf.acadia.2021.530
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	caadria2015_090
id	caadria2015_090
authors	Altabtabai, Jawad and Wei Yan
year	2015
title	A User Interface for Parametric Architectural Design Reviews
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 65-74
doi	https://doi.org/10.52842/conf.caadria.2015.065
summary	Architectural form and performance are affected by the designer's graphical representation methods. Parametric CAD systems, as design and representation tools, have become ubiquitous in architectural practice and education. Literature in the area of parametric design reviews is scarce and focused within building inspection and construction coordination domains. Additionally, platforms marketed as design review tools lack basic functionality for conducting comprehensive, parametric, and performance-based reviews. We have developed a user interface prototype where geometric and non-geometric information of a Building Information Model were translated into an interactive gaming environment. The interface allows simultaneous occupation and simulation of spatial geometry, enabling the user to engage with object parameters, as well as, performance-based, perspectival, diagrammatic, and orthographic representations for total spatial and performance comprehension.
keywords	Design cognition; Virtual/augmented reality and interactive environments; Human-computer interaction.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2015_485
id	cf2015_485
authors	Anaf, Márcia and Harris, Ana Lúcia Nogueira de Camargo
year	2015
title	The geometry of Chuck Hoberman as the basis for the development of dynamic experimental structures
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 485.
summary	The cognitive-theoretical foundation referring to teach drawing as a way of thinking, as well as the construction of the environment by means of drawing using transforming geometries and the formal and para-formal computational process, creating unusual geometries through generative design processes and methodologies, can be seen as some of the main possibilities in exploring dynamic experimental structures for an Adaptive Architecture. This article presents the development of a model for articulated facades, inspired by Hoberman´s Tessellates, and his Adaptive Building Initiative (ABI) project to develop facades models that respond in real time to environmental changes. In addition, we describe an experiment based on the retractable structures, inspired by Hoberman´s work and experimentations. Solutions for responsive facades can offer more flexible architectural solutions providing better use of natural light and contributing to saving energy. Using Rhinoceros and the Grasshopper for modeling and test the responsiveness, the parametric model was created to simulate geometric panels of hexagonal grids that would open and close in reaction to translational motion effects, regulating the amount of light that reaches the building.
keywords	Parametric architecture, Hoberman´s Tessellates, Adaptive Building Initiative (ABI), Articulated Facades, Complex Geometries, Retractable structures, Retractable polyhedra.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	sigradi2015_9.330
id	sigradi2015_9.330
authors	Andrade, Max; Assis, Jonas; Brochardt, Mikael
year	2015
title	The Portable Viewers Use as Increase Factor in Productivity of Civil Construction
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 473-480.
summary	The potential of Building Information Modeling (BIM) as booster of productivity in construction can be better explorer using solutions of information visualization in digital environment, using tablets and smartphones. The maintenance of the project in digital environment at the construction site has several advantages over the use of printed designs, enabling improvements in the flow, quality and quantity of information in the enforcement phase. In BIM, this solution is further efficient, exploiting its wealth of information. This article examines portable visualization tools concerning resources and suitability for use in construction sites, forming a comparative and suggestive overview of these applications.
keywords	BIM, Visualization, Information, Application, Productivity
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia17_102
id	acadia17_102
authors	Aparicio, German
year	2017
title	Data-Insight-Driven Project Delivery: Approach to Accelerated Project Delivery Using Data Analytics, Data Mining and Data Visualization
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 102-109
doi	https://doi.org/10.52842/conf.acadia.2017.102
summary	Today, 98% of megaprojects face cost overruns or delays. The average cost increase is 80% and the average slippage is 20 months behind schedule (McKinsey 2015). It is becoming increasingly challenging to efficiently support the scale, complexity and ambition of these projects. Simultaneously, project data is being captured at growing rates. We continue to capture more data on a project than ever before. Total data captured back in 2009 in the construction industry reached over 51 petabytes, or 51 million gigabytes (Mckinsey 2016). It is becoming increasingly necessary to develop new ways to leverage our project data to better manage the complexity on our projects and allow the many stakeholders to make better more informed decisions. This paper focuses on utilizing advances in data mining, data analytics and data visualization as means to extract project information from massive datasets in a timely fashion to assist in making key informed decisions for project delivery. As part of this paper, we present an innovative new use of these technologies as applied to a large-scale infrastructural megaproject, to deliver a set of over 4,000 construction documents in a six-month period that has the potential to dramatically transform our industry and the way we deliver projects in the future. This paper describes a framework used to measure production performance as part of any project’s set of project controls for accelerated project delivery.
keywords	design methods; information processing; data mining; big data; data visualization
series	ACADIA
email
last changed	2022/06/07 07:55

_id	sigradi2015_13.316
id	sigradi2015_13.316
authors	Ariza, Inés; Gazit, Merav
year	2015
title	On-site Robotic Assembly of Double-curved Self-supporting Structures
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 746-753.
summary	Robotic assembly of architectural structures has been an area of research for a few decades. Yet, current methods impose a large number of constraints on the geometry of those structures. In this paper we introduce a method for robotic assembly that enables the construction of double curved self-supporting structures. Latest research challenges have focused on the assembly of sophisticated brick structures and on sensor feedback systems for handling accuracy. We propose an alternative strategy to tackle tolerance handling in complex structures that rely on geometry. The intelligence of the system lies in two main aspects: a subdivision technique that incorporates the robot’s constraints as well as the structural equilibrium of the structure during each step of assembly, in order to omit the use of scaffolding; and a match between geometric information and the robot’s movements in a robot programming environment. As a proof of concept, we fabricated a portion of a full-scale double-curved structure. The structure was assembled without scaffolding by a portable KUKA KR10 on a randomly picked site. This project aims to demonstrate an easy and simple method for robotic assembly that enables the realization of digitally generated complex geometries as concrete complex structures.
keywords	Robotic Assembly, Self-supporting Structure, On-site Assembly, Double Curvature, Construction Tolerances
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2015_279
id	ecaade2015_279
authors	Baquero, Pablo, Giannopoulou, Effimia and Cavazos, Jaime
year	2015
title	Strategies for Metallic Vault Structures - Aluminium Composite Panels Used as Structural Elements
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 169-176
doi	https://doi.org/10.52842/conf.ecaade.2015.2.169
wos	WOS:000372316000021
summary	This article explains parametric, fabrication and teaching strategies used during a workshop for constructing a full scale, self supporting, vault metal structure realized with parametric manufacturing methods. The key aim is to construct a small size, easy assembled and transportable pavilion, while focusing on new design and construction methods of a façade system in which the structure, joint and skin will integrate functions in a unifying structural system. For the investigation, we explore materials commonly used in façade industry, such as aluminum profiles and aluminium composite panels (ACP).
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2015_237
id	caadria2015_237
authors	Bazalo, Frano. and Tane J. Moleta
year	2015
title	Responsive Algorithms
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 209-218
doi	https://doi.org/10.52842/conf.caadria.2015.209
summary	An algorithm is a process of addressing a problem in a finite number of steps. In the context of architectural design, algorithmic thinking means taking on an interpretive role to understand the results in relation to design criteria, knowing how to modify the code to explore new options, and speculating on further design potentials. The application of algorithms within architecture often addresses the developed design stages, primarily to optimise structure, test environmental performance or to resolve complex construction. This research aims to explore algorithmic tools with a focus on early stage design. This design stage is often developed using traditional processes and is where algorithmic applications have been less successfully executed. The objectives are to algorithmically explore the areas of space planning, programme layout, form finding and form optimisation within early stage architectural design. Through the combination of a range of diverse algorithms, this research has an ultimate aim of integrating a computational workflow into practice at the early design stage.
keywords	Computational design, Early stage design
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2015_sp_10.16
id	sigradi2015_sp_10.16
authors	Bertoldi, Cristiane Aun; Hanns, Daniela Kutschat
year	2015
title	Using Photographs of Physical Models to Visualize Design Opportunities and Problems
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 810-814.
summary	This paper looks at photographic documentation as a resource for detecting errors, identifying possible design principles and providing guidance for the development of student projects in the course AUP2418 – Three Dimensional Models of the undergraduate curriculum at the Faculty of Architecture and Urban Studies at USP in S?o Paulo, Brazil. This article deals with teaching industrial design models and describes the methodological basis adopted. It also offers examples and analyzes the construction and use of models in order to demonstrate the relevance of photographic documentation during the design process.
keywords	Physical Models, Design, Photography, Teaching, FAUUSP
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2015_8.27
id	sigradi2015_8.27
authors	Boas, Naylor Vilas
year	2015
title	Digital Urban Simulators: Representation and Interaction with the History of the Cities
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 308-316.
summary	This work aims to expose the methodological process of the construction of a digital urban simulator called “SIMRio”, that is being developed at the Laboratory of Digital Representation and Urban Analysis. Constructed with the technology of videogames, through the use of its engines applied to digital 3d models of central area of Rio de Janeiro, the research has the objective to develop interactive systems where one could virtually visit, in real time, not only the spaces of the city, but also different times of its history, walking between them as if were in a digital time machine.
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: