Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 576

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2015_77
id	ecaade2015_77
authors	Bialkowski, Sebastian and Kepczynska-Walczak, Anetta
year	2015
title	Engineering Tools Applied in Architecture - Challenges of Topology Optimization Implementation
doi	https://doi.org/10.52842/conf.ecaade.2015.1.261
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 261-268
wos	WOS:000372317300028
summary	Computation, in the context of a digital designing process, is redefining architectural practice. Architects are developing new sets of tools which are dramatically changing the typical way of design procedure. The paper describes the research assumptions, problems and solutions proposition, aimed at creation of a real-time form finding tool for architects based on engineering methods. Through intersecting architectural form evaluation with engineering analysis and optimisation tools it is highly intended to offer the opportunity to variety of architects and designers to use the exceedingly complex and compound process for their design improvement. The form finding tool, to be effective and reliable, has to provide immediate feedback to a designer. This requirement enforces a software developer to use more sophisticated solutions. The paper focuses on possibilities of already known engineering procedures acceleration such as Finite Element Method or Topology Optimization for effective implementation in architectural design process.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=1337360e-702e-11e5-90b6-cbdace47c7fb
last changed	2022/06/07 07:52

_id	ecaade2015_130
id	ecaade2015_130
authors	Asl, Mohammad Rahmani; Stoupine, Alexander, Zarrinmehr, Saied and Yan, Wei
year	2015
title	Optimo: A BIM-based Multi-Objective Optimization Tool Utilizing Visual Programming for High Performance Building Design
doi	https://doi.org/10.52842/conf.ecaade.2015.1.673
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 673-682
wos	WOS:000372317300073
summary	Within the architecture, engineering, and construction (AEC) industry, the application of multidisciplinary optimization methods has been shown to reach significant improvements in building performance compared to conventional design methods. As a result, the use of multidisciplinary optimization in the process of design is growing and becoming a common method that provides desired performance feedback for decision making. However, there is a lack of BIM-based multidisciplinary optimization tools that use the rich information stored in Building Information Models (BIM) to help designers explore design alternatives across multiple competing design criteria. In this paper we introduce Optimo, an open-source visual programming-based Multi-Objective Optimization (MOO) tool, which is developed to parametrically interact with Autodesk Revit for BIM-based optimization. The paper details the development process of Optimo and also provides the initial validation of its results using optimization test functions. Finally, strengths, limitations, current adoption by academia and industry, and future improvements of Optimo for building performance optimization are discussed.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2015_303
id	ecaade2015_303
authors	Coroado, Luís; Pedro, Tiago, D'Alpuim, Jorge, Eloy, Sara and Dias, MiguelSales
year	2015
title	VIARMODES: Visualization and Interaction in Immersive Virtual Reality for Architectural Design Process
doi	https://doi.org/10.52842/conf.ecaade.2015.1.125
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 125-134
wos	WOS:000372317300014
summary	The complexity of today´s architecture solutions brings the need to integrate, in the design process, digital tools for creation, visualization, representation and evaluation of design solutions. This paper proposes the adoption of a new Virtual Reality (VR) tool, referred to as VIARmodes, to support the architectural design process with an improved communication across different specialities, towards the facilitation of the project decision process. This tool allows a complete visualization of the design, specifically useful during the detailed design phase, including the architecture design and of other engineering specialities, progressively and interactively adapting the project visualization to the information needed for each discipline. With a set of 3 different visualization modes simulated in real scale within a Virtual Environment (VE), and adopting natural human-computer interaction by using speech, the system allows a team of architect and engineers, to visualize and interact with the proposed design during a collaborative design brief. We carried a usability evaluation study with 12 architects. The study showed that the tool was perceived to be effective and its use efficient during the design process, especially during the detailed design phase.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=4129cbae-70c8-11e5-be63-27454208986c
last changed	2022/06/07 07:56

_id	ecaade2015_120
id	ecaade2015_120
authors	Daoud, Bassam and Voordouw, Johan
year	2015
title	Making Machines that Make Buildings - Constructing a Mobile 3D Printer for Concrete Elements
doi	https://doi.org/10.52842/conf.ecaade.2015.2.355
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 355-359
wos	WOS:000372316000041
summary	This paper is both a fundamental and applied study of the multi-faceted design and fabrication issues related to the construction of a mobile 3D printer. The paper signifies the halfway point in a project initiated at the Azrieli School of Architecture and Urbanism at Carleton University starting in 2013. The printer, entitled 3DB, intends to print concrete elements for the Architecture, Engineering and Construction industry. The printer frame was designed to fit within the bed of a typical half-ton pick up truck or contract trailer. The paper describes the design, simulation and construction of the steel frame, gantry and extruder and makes speculation on future research including improved design of the extruder and nozzle mechanism.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	eaea2015_t3_paper12
id	eaea2015_t3_paper12
authors	LoBuglio, David; Derycke, Denis
year	2015
title	Reduce to Understand: A Challenge for Analysis and Three-dimensional Documentation of Architecture
source	ENVISIONING ARCHITECTURE: IMAGE, PERCEPTION AND COMMUNICATION OF HERITAGE [ISBN 978-83-7283-681-6],Lodz University of Technology, 23-26 September 2015, pp.388-397
summary	For nearly thirty years, the digital phenomenon has integrated many disciplines. Those involved in image processing and analysis took advantage of this major technological breakthrough to revisit the tools and methods of their discipline. In this context, the architectural field, and more specifically the one of heritage analysis and documentation, have greatly benefited from the development of acquisition and visualization techniques. Today, it is no longer unusual to document a building with millions of three-dimensional spatial coordinates. Nevertheless, until the last century, documentation by drawing corresponded to a work of reverse engineering in which it belonged to the architect to understand the object and to represent its key feature. Today, 3D data acquisition technology promotes an increasingly “figurative” representation of architecture. In this paper, we consider some epistemological avenues for the integration of those new approaches to the requirements of architectural representation.
keywords	computer graphics; architectural representation; architectural education; architectural survey
series	EAEA
email
last changed	2016/04/22 11:52

_id	sigradi2023_416
id	sigradi2023_416
authors	Machado Fagundes, Cristian Vinicius, Miotto Bruscato, Léia, Paiva Ponzio, Angelica and Chornobai, Sara Regiane
year	2023
title	Parametric environment for internalization and classification of models generated by the Shap-E tool
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1689–1698
summary	Computing has been increasingly employed in design environments, primarily to perform calculations and logical decisions faster than humans could, enabling tasks that would be impossible or too time-consuming to execute manually. Various studies highlight the use of digital tools and technologies in diverse methods, such as parametric modeling and evolutionary algorithms, for exploring and optimizing alternatives in architecture, design, and engineering (Martino, 2015; Fagundes, 2019). Currently, there is a growing emergence of intelligent models that increasingly integrate computers into the design process. Demonstrating great potential for initial ideation, artificial intelligence (AI) models like Shap-E (Nichol et al., 2023) by OpenAI stand out. Although this model falls short of state-of-the-art sample quality, it is among the most efficient orders of magnitude for generating three-dimensional models through AI interfaces, offering practical balance for certain use cases. Thus, aiming to explore this gap, the presented study proposes an innovative design agency framework by employing Shap-E connected with parametric modeling in the design process. The generation tool has shown promising results; through generations of synthetic views conditioned by text captions, its final output is a mesh. However, due to the lack of topological information in models generated by Shap-E, we propose to fill this gap by transferring data to a parametric three-dimensional surface modeling environment. Consequently, this interaction's use aims to enable the transformation of the mesh into quantifiable surfaces, subject to collection and optimization of dimensional data of objects. Moreover, this work seeks to enable the creation of artificial databases through formal categorization of parameterized outputs using the K-means algorithm. For this purpose, the study methodologically orients itself in a four-step exploratory experimental process: (1) creation of models generated by Shap-E in a pressing manner; (2) use of parametric modeling to internalize models into the Grasshopper environment; (3) generation of optimized alternatives using the evolutionary algorithm (Biomorpher); (4) and classification of models using the K-means algorithm. Thus, the presented study proposes, through an environment of internalization and classification of models generated by the Shap-E tool, to contribute to the construction of a new design agency methodology in the decision-making process of design. So far, this research has resulted in the generation and classification of a diverse set of three-dimensional shapes. These shapes are grouped for potential applications in machine learning, in addition to providing insights for the refinement and detailed exploration of forms.
keywords	Shap-E, Parametric Design, Evolutionary Algorithm, Synthetic Database, Artificial Intelligence
series	SIGraDi
email
last changed	2024/03/08 14:09

_id	sigradi2015_3.300
id	sigradi2015_3.300
authors	Batistello, Paula; Balzan, Katiane Laura; Piaia, Luana Peroza; Miotto, Juliano
year	2015
title	Rapid prototyping and digital fabrication in vertical atelier: from process to materialization
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 137-142.
summary	The evolution of techniques and digital tools has aided and complemented actions in the design process, generating alternatives and reducing costs in short times. This paper reports experience that integrated the rapid prototyping in vertical atelier, in one of Pronto 3D network institution member. The results shows that use of rapid prototyping technology contributes to design improvement process applied to teaching of architecture and urbanism, mainly in relation of identification in failures and conflicts of proposals, which eventually pass unnoticed by students in different phases of the course.
keywords	Rapid Prototyping, Architectural Design Process, Vertical Atelier
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2015_48
id	ecaade2015_48
authors	Edemskaya, Elizaveta and Agkathidis, Asterios
year	2015
title	Vladimir Shukhov - A Critical Review on Digital Architecture
doi	https://doi.org/10.52842/conf.ecaade.2015.1.395
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 395-402
wos	WOS:000372317300043
summary	This paper is a critical review on advantages and disadvantages of contemporary digital architecture, in retrospect to Vladimir Shukhov's design techniques, applied in the early 20th century. After investigating Shukhov's structural systems, this paper explores the relationship between performance and form, questioning the necessity of high-complexity structures. It will present unpublished archive material of his early work and stimulate a valuable discussion by comparing it with contemporary projects designed by renowned architects. The study on Shukhov focuses on his tessellation method of double-curved surfaces using simple standardized elements. The study of present digital approaches revolves around leading architects using computational tools (e.g. Foster and Partners, Buro Happold and Arup), who have materialized high complexity structures composed by irregular units. Our findings highlight advantages and disadvantages of contemporary computational approaches.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=bbc13038-7022-11e5-936a-d7a776e5d67a
last changed	2022/06/07 07:55

_id	sigradi2015_3.65
id	sigradi2015_3.65
authors	Gámez, Oscar; Meyer, Julien; Claude-Bignon, Jean; Duchanois, Gilles
year	2015
title	Interaction of analogic and digital workflows for architectural design and production
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 77-85.
summary	Architectural conception often faces challenges regarding the way a design becomes real. Today’s digital tools make possible to conceive and produce more defying architectural objects, which needs special abilities in the field of modeling and programming applied to design. The work presented in this writing, shows how actual digital methods of conception and production are underpinned on traditional procedures of conception and construction as it looks back on the way traditional techniques come to help the digital approach, when the latter is not achieved the way and by the means it is intended to.
keywords	Digital Conception, Robotic Fabrication, Non-standard Architecture, Wood Construction
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	caadria2015_139
id	caadria2015_139
authors	Herr, Christiane M. and Ryan C. Ford
year	2015
title	Adapting Cellular Automata as Architectural Design Tools
doi	https://doi.org/10.52842/conf.caadria.2015.169
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 169-178
summary	In this paper we examine the adaptations cellular automata (CA) are typically subjected to when they are applied to architectural designing. We argue that, despite a number of earlier studies that portrayed CA as generic generative design tools, the transition from generic CA to specific design tools is not yet well understood. To describe this transition, we first examine this aspect in a number of previous studies relating CA to architectural design. In a following detailed analysis of an applied design case study, we trace similarities between findings made in the literature review to findings made in the case study and extend them with additional observations. We conclude with a summary of challenges and opportunities met by architectural designers employing and developing CA for design purposes.
keywords	Cellular automata; generative design; design research; design tools.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ecaade2015_ws-robowood
id	ecaade2015_ws-robowood
authors	Hornung, Philipp; Johannes Braumann, Reinhold Krobath, Sigrid Brell-Cokcan and Georg Glaeser
year	2015
title	Robotic Woodcraft: Creating Tools for Digital Design and Fabrication
doi	https://doi.org/10.52842/conf.ecaade.2015.2.033
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 33-36
wos	WOS:000372316000004
summary	Robotic Woodcraft is a transdisciplinary, arts-based investigation into robotic arms at the University for Applied Arts Vienna. Bringing together the craftsmen of the Department for Wood Technology, the geometers of the Department for Arts and Technology, the young industrial design office Lucy.D and the roboticists of the Association for Robots in Architecture, the research project explores new approaches on how to couple high-tech robotic arms with high-end wood fabrication. In the eCAADe workshop, participants are introduced to KUKA\|prc (parametric robot control, Braumann and Brell-Cokcan, 2011) and shown approaches on how to create their own digital fabrication tools for customized fabrication processes involving wood.
keywords	Robotic woodcraft; Arts-based research; Robotic fabrication; Visual programming; Parametric robot control
series	eCAADe
last changed	2022/06/07 07:50

_id	caadria2015_102
id	caadria2015_102
authors	Loh, Paul
year	2015
title	Articulated Timber Ground, Making Pavilion as Pedagogy
doi	https://doi.org/10.52842/conf.caadria.2015.023
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 23-32
summary	Designing and making a pavilion within a studio setting has been undertaken by various educators and researchers as a valuable pedagogy in the past 10 years. It aims to construct a collaborative environment that allows students to develop an integrated approach to learning; through association, teamwork and creative collaboration. Usually the tacit knowledge applied and acquired through making, and the knowledge of design strategy and analysis are separated in the way they are taught; it is often difficult to integrate these within the same coursework which often leads to students using digital software and fabrication tools as problem solving devices. This paper looks at an integrated approach to learning computational design and digital fabrication through the making of a pavilion by a Master level design studio. The paper discusses the pedagogy of making through creative collaboration and integrated workflow. It focuses on the use of digital and physical prototypes as devices to stimulate an oscillating dialogue between problem solving and puzzle making; a counterpoint for students to develop and search for new knowledge in order to create personalised learning experience. The paper concludes with an examination on the limits of digital prototype when interfaced with physical environment.
keywords	Digital Fabrication; Collaborative Design; Design Workflow; Pedagogy, File to Production
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2015_156
id	caadria2015_156
authors	Nan, Cristina
year	2015
title	A New Machinecraft. Architectural Robots
doi	https://doi.org/10.52842/conf.caadria.2015.745
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 745-754
summary	The topic of this paper concentrates on robots and their new role in the architectural process from the early stage of conceptualization to the final stage of its materialization. By presenting a theoretical framework and an applied case study, this paper tries to initiate the discussion of redefining the status of the robotic machine in architecture. Besides being a regular tool among other digital fabrication tools, the robot and the ability of the architect to technically manipulate them, bears the potential of further reconnecting and intertwining the process behind design and fabrication. Operational and structural processes are being modified and points of focus shifted. Digital design connected by customized robotic machines to digital fabrication has the capability to result in a new type of architecture.
keywords	Machinecraft; robotic printing; robotic fabrication; construction strategy.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	acadia15_431
id	acadia15_431
authors	Winn; Kelly
year	2015
title	Transient Thermal Exchange and Developmental Form for Tactile Surfaces
doi	https://doi.org/10.52842/conf.acadia.2015.431
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 431-441
summary	The idea of an emergent or generative form based on repeating rules of development borrowed from the field of developmental biology has provided fertile ground for inspiration for architectural theory and computational design. With simple constraints developed iteratively, complex geometry and form generation can be distilled down to a list of developmental rules or functions in order to deterministically generate form. The ideas and illustrations of naturalists on organic form and developmental biology leading back to the turn of the 20th c., such as the work of D'arcy Wentworth Thompson and Ernst Haeckel, have inspired architects from Louis Sullivan all the way to contemporary generative design. This study revisits this design tradition of biomimetic geometries based on deterministic rules for the iterative development of forms based on biological analogs and models for growth. A series of semi-regular compound patterns were developed using parametric modeling and iterative rules. These geometries were then applied to surface topologies as a decorative tactile embellishment resulting in complex thermodynamic conditions. A series of physical prototypes where then developed with different high-relief patterns and pattern densities. Positive prototype geometries were then produced using stereolithography for casting plaster molds for the production molding of finished ceramic pieces for thermal analysis using digital thermography. By studying the performance of these complex geometries as physical prototypes under controlled experimentation, high-relief surfaces and the resulting thermodynamic conditions can be understood not just qualitative experience, but also quantitatively through measured performance metrics and innovative tools for analytical analysis.
keywords	Tactile surfaces, developmental biology, biomimicry, l-systems, ceramic materials, heat transfer, thermography, ergonomics
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:57

_id	caadria2015_043
id	caadria2015_043
authors	Zboinska, Malgorzata A.
year	2015
title	Enriching Creativity in Digital Architectural Design
doi	https://doi.org/10.52842/conf.caadria.2015.819
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 819-828
summary	Although conceptual design is one of the most important stages of creation, impacting the quality and cost of the final product, current research indicates that designers still lack adequate tools supporting early-stage design. This research challenges that notion, by proposing a hybrid digital design platform for conceptual architectural design. The platform contains four miscellaneous techniques: animation, free-form modelling, associative parametric modelling and per-formance-driven modelling. In a digital design experiment we demon-strate that the collective application of these techniques to early-stage design explorations intensifies the architect’s visual and cognitive rea-soning processes, and hence supports the emergence of promising de-sign artefacts which bear the traces of all the techniques applied in the course of their conception. Additionally, the study also points at some other promising virtues of the hybrid toolset, including: provision of diversified form-finding opportunities on various levels of design ab-straction; the potential to direct designers onto unplanned creation paths; the ability to increase the versatility and functionality of the solutions; and the capacity to sustain design activities of various character, ranging from highly intuitive ones to very rational ones.
keywords	Conceptual design methods and tools; free-form modelling; animation; associative parametric modelling; performance-driven design.
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	acadia15_263
id	acadia15_263
authors	Ahlquist, Sean
year	2015
title	Social Sensory Architectures: Articulating Textile Hybrid Structures for Multi-Sensory Responsiveness and Collaborative Play
doi	https://doi.org/10.52842/conf.acadia.2015.263
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 263-273
summary	This paper describes the development of the StretchPLAY prototype as a part of the Social Sensory Surfaces research project, focusing on the design of tactile and responsive environments for children with Autism Spectrum Disorder (ASD). The project is directed specifically at issues with sensory processing, the inability of the nervous system to filter sensory input in order to indicate an appropriate response. This can be referred to as a “traffic jam” of sensory data where the intensity of such unfiltered information leads to an over-intensified sensory experience, and ultimately a dis-regulated state. To create a sensory regulating environments, a tactile structure is developed integrating physical, visual and auditory feedback. The structure is defined as a textile hybrid system integrating a seamless knitted textile to form a continuous topologically complex surface. Advancements in the fabrication of the boundary structure, of glass-fiber reinforced rods, enable the form to be more robustly structured than previous examples of textile hybrid or tent-like structures. The tensioned textile is activated as a tangible interface where sensing of touch and pressure on the surface triggers ranges of visual and auditory response. A specific child, a five-year old girl with ASD, is studied in order to tailor the technologies as a response to her sensory challenges. This project is a collaboration with students, researchers and faculty in the fields of architecture, computer science, information (human-computer interaction), music and civil engineering, along with practitioners in the field of ASD-based therapies.
keywords	Textile Hybrid, Knitting, Sensory Environment, Tangible Interface, Responsive systems and environments
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia17_202
id	acadia17_202
authors	Cupkova, Dana; Promoppatum, Patcharapit
year	2017
title	Modulating Thermal Mass Behavior Through Surface Figuration
doi	https://doi.org/10.52842/conf.acadia.2017.202
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 202-211
summary	This research builds upon a previous body of work focused on the relationship between surface geometry and heat transfer coefficients in thermal mass passive systems. It argues for the design of passive systems with higher fidelity to multivariable space between performance and perception. Rooted in the combination of form and matter, the intention is to instrumentalize design principles for the choreography of thermal gradients between buildings and their environment from experiential, spatial and topological perspectives (Figure 1). Our work is built upon the premise that complex geometries can be used to improve both the aesthetic and thermodynamic performance of passive building systems (Cupkova and Azel 2015) by actuating thermal performance through geometric parameters primarily due to convection. Currently, the engineering-oriented approach to the design of thermal mass relies on averaged thermal calculations (Holman 2002), which do not adequately describe the nuanced differences that can be produced by complex three-dimensional geometries of passive thermal mass systems. Using a combination of computational fluid dynamic simulations with physically measured data, we investigate the relationship of heat transfer coefficients related to parameters of surface geometry. Our measured results suggest that we can deliberately and significantly delay heat absorption re-radiation purely by changing the geometric surface pattern over the same thermal mass. The goal of this work is to offer designers a more robust rule set for understanding approximate thermal lag behaviors of complex geometric systems, with a focus on the design of geometric properties rather than complex thermal calculations.
keywords	design methods; information processing; physics; smart materials
series	ACADIA
email
last changed	2022/06/07 07:56

_id	cf2015_037
id	cf2015_037
authors	de Vries, Bauke; Grond, Manon and van der Zee, Aant
year	2015
title	Development of a multi-disciplinary university wide design course
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 37-46.
summary	Design is one of the basic skills of every engineer. However until now design is only seen as a core course in Architecture studies and lately in Industrial Engineering studies. This paper reports about the development of a design course for all departments of a typical technical university. After a short overview of design teaching tradition, an inventory is presented of the different interpretation of design by the various departments. The course development is presented over two periods: 2012-2014, and 2014-2015. In between a major change was conducted. The course learning goals and student evaluations are presented. In the discussion we reflect on fundamental and practical problems that occur in design teaching for such a wide audience. Finally we draw conclusions on the changing role of design what is needed to give design the same status as mathematics in a technical curriculum.
keywords	Design, Design teaching, Multi-disciplinary design
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	ecaade2018_243
id	ecaade2018_243
authors	Gardner, Nicole
year	2018
title	Architecture-Human-Machine (re)configurations - Examining computational design in practice
doi	https://doi.org/10.52842/conf.ecaade.2018.2.139
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 139-148
summary	This paper outlines a research project that explores the participation in, and perception of, advanced technologies in architectural professional practice through a sociotechnical lens and presents empirical research findings from an online survey distributed to employees in five large-scale architectural practices in Sydney, Australia. This argues that while the computational design paradigm might be well accepted, understood, and documented in academic research contexts, the extent and ways that computational design thinking and methods are put-into-practice has to date been less explored. In engineering and construction, technology adoption studies since the mid 1990s have measured information technology (IT) use (Howard et al. 1998; Samuelson and Björk 2013). In architecture, research has also focused on quantifying IT use (Cichocka 2017), as well as the examination of specific practices such as building information modelling (BIM) (Cardoso Llach 2017; Herr and Fischer 2017; Son et al. 2015). With the notable exceptions of Daniel Cardoso Llach (2015; 2017) and Yanni Loukissas (2012), few scholars have explored advanced technologies in architectural practice from a sociotechnical perspective. This paper argues that a sociotechnical lens can net valuable insights into advanced technology engagement to inform pedagogical approaches in architectural education as well as strategies for continuing professional development.
keywords	Computational design; Sociotechnical system; Technology adoption
series	eCAADe
email
last changed	2022/06/07 07:51

_id	cf2015_324
id	cf2015_324
authors	Gerber, David Jason; Pantazis, Evangelos and Marcolino, Leandro Soriano
year	2015
title	Design Agency: Prototyping Multi-Agent Systems in Architecture
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 324.
summary	This paper presents research on the prototyping of multi-agent systems for architectural design. It proposes a design exploration methodology at the intersection of architecture, engineering, and computer science. The motivation of the work includes exploring bottom up generative methods coupled with optimizing performance criteria including for geometric complexity and objective functions for environmental, structural and fabrication parameters. The paper presents the development of a research framework and initial experiments to provide design solutions, which simultaneously satisfy complexly coupled and often contradicting objectives. The prototypical experiments and initial algorithms are described through a set of different design cases and agents within this framework; for the generation of façade panels for light control; for emergent design of shell structures; for actual construction of reciprocal frames; and for robotic fabrication. Initial results include multi-agent derived efficiencies for environmental and fabrication criteria and discussion of future steps for inclusion of human and structural factors.
keywords	Generative Design, Parametric Design, Multi-Agent Systems, Digital Fabrication, Form Finding, Reciprocal Frames.
series	CAAD Futures
email
last changed	2015/06/29 07:55

For more results click below: