Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 591

Reformat results as: short short into frame detailed detailed into frame

_id	acadia15_357
id	acadia15_357
authors	Ashour, Yassin; Kolarevic, Branko
year	2015
title	Heuristic Optimization in Design
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 357-369
doi	https://doi.org/10.52842/conf.acadia.2015.357
summary	This paper presents a workflow called the ‘heuristic optimization workflow’ that integrates Octopus, a Multi-Objective Optimization (MOO) engine with Grasshopper3D, a parametric modeling tool, and multiple simulation software. It describes a process that enables the designer to integrate disparate domains via Octopus and complete a feedback loop with the developed interactive, real-time visualization tools. A retrospective design of the Bow Tower in Calgary is used as a test case to study the impact of the developed workflow and tools, as well as the impact of MOO on the performance of the solutions. The overall workflow makes MOO based results more accessible to designers and encourages a more interactive ‘heuristic’ exploration of various geometric and topological trajectories. The workflow also reduces design decision uncertainty and design cycle latency through the incorporation of a feedback loop between geometric models and their associated quantitative data. It is through the juxtaposition of extreme performing solutions that serendipity is created and the potential for better multiple performing solutions is increased.es responsive systems, which focus on the implementation of multi-objective adaptive design prototypes from sensored environments. The intention of the work is to investigate multi-objective criteria both as a material system and as a processing system by creating prototypes with structural integrity, where the thermal energy flow through the prototype, to be understood as a membrane, can be controlled and the visual transparency altered. The work shows performance based feedback systems and physical prototype models driven by information streaming, screening, and application.
keywords	Multi-Objective Optimization, Generative Design, Performance-Based Design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	cf2015_331
id	cf2015_331
authors	Brodeschi, Michal; Pilosof, Nirit Putievsky and Kalay, Yehuda E.
year	2015
title	The definition of semantic of spaces in virtual built environments oriented to BIM implementation
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 331-346.
summary	The BIM today can be a provider of inputs to performance analysis of different phenomena such as thermal comfort, energy consumption or winds. All these assessments are fundamental to the post occupation of the building. The attainment of approximate information of how the future building would behave under these conditions will reduce the waste of materials and energy resources. The same idea is used for evaluating the users occupation. Through simulation of human behavior is possible to evaluate which design elements can be improved. In complex structures such as hospital buildings or airports is quite complex for architects to determine optimal design solutions based on the tools available nowadays. These due to the fact users are not contemplated in the model. Part of the data used for the simulation can be derived from the BIM model. The three-dimensional model provides parametric information, however are not semantically enriched. They provide parameters to elements but not the connection between them, not the relationship. It means that during a simulation Virtual Users can recognize the elements represented in BIM models, but not what they mean, due to the lack of semantics. At the same time the built environment may assume different functions depending on the physical configuration or activities that are performed on it. The status of the space may reveal differences and these changes occur constantly and are dynamic. In an initial state, a room can be noisy and a moment later, quiet. This can determine what type of activities the space can support according to each change in status. In this study we demonstrate how the spaces can express different semantic information according to the activity performed on it. The aim of this paper is to simulate the activities carried out in the building and how they can generate different semantics to spaces according to the use given to it. Then we analyze the conditions to the implementation of this knowledge in the BIM model.
keywords	BIM, Virtual Sensitive Environments, Building Use Simulation, Semantics.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	caadria2015_077
id	caadria2015_077
authors	Shiff, Galit; Yael Gilad and Amos Ophir
year	2015
title	Adaptive Polymer Based BIPV Skin
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 345-354
doi	https://doi.org/10.52842/conf.caadria.2015.345
summary	This study focuses on developing three-dimensional solar panels, as an alternative to traditional flat Photovoltaic (PV) surfaces in Building Integrated Photovoltaic (BIPV). We propose to increase the energy efficiency of buildings by using the entire envelope for energy production as well as by increasing the efficiency of solar energy output in orientations which were traditionally considered as non-ideal. The panels are constructed from Polycarbonate with integrated flexible photovoltaic film, solar paint or dye. The methodology included digital algorithm-based tools for achieving optimized variable three-dimensional surfaces according to local orientation and location, computational climatic simulations and comparative field tests. In addition, the structural, mechanical and thermal properties of the integration between flexible PV sheets and hard plastic curved panels were studied. Interim results demonstrate a potential improvement of 50-80% in energy production per building unit resulting from geometric variations per-se. The dependence of energy production by surface geometry was revealed and an optimized method for solar material distribution on the surface was proposed. A parametric digital tool for automatic generation of optimized three-dimensional panels was developed together with a database and material models of the optimized panels system.
keywords	Building Integrated Photovoltaics; digital algorithm; climatic simulations; building envelope
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2015_sp_8.284
id	sigradi2015_sp_8.284
authors	Queiroz, Natália; Dantas, Ney; Nome, Carlos; Vaz, Carlos
year	2015
title	Designing a Building envelope using parametric and algorithmic processes
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 797-801.
summary	This article presents a case study on a vertical building envelope design considering Recife ?s climatic conditions. It consists of the utilization of parametric and algorithmic processes to distribute sun shading devices. The study uses computational tools such as Grasshopper and the DIVA for Grasshopper. The latter is a thermal energy simulation tool that uses the Energy Plus 7.0 and Daysim for calculations. The model uses incident solar radiation simulation on the envelope as basis for distribution of shading devices. The result is a parametric model that automatically responds to urban and climatic characteristics, through simulations integrated to the 3D model.
keywords	Shading Devices, Parameterization, Grasshopper, DIVA
series	SIGRADI
email
last changed	2016/03/10 09:58

_id	ecaade2015_298
id	ecaade2015_298
authors	Vannini, Virgínia Czarnobay and Turcienicz, Benamy
year	2015
title	Thermal Performance Associated with Materials in Early Stages of the Design Process
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 325-331
doi	https://doi.org/10.52842/conf.ecaade.2015.1.325
wos	WOS:000372317300035
summary	This work is part of a research on decision-making processes in architecture involving computer programs in the early stages of designing the building envelope. The research involves two steps: (1) intuitive processes analysis during the handling of the building envelope components - floor, roof, walls, windows, solar protection elements - and (2) generative processes analysis of building envelopes supported by performance models. This article is the first step, analyzing four housing prototypes, designed and built for the Solar Decathlon competition. First, the building envelope elements and thermal characteristics of these prototypes were modeled; then different materials that make up the envelope were tested, aimed at assessing thermal performance against the modifications proposed in six different scenarios. The results showed that it is possible to obtain intuitive solutions that equalize temperature changes in the early stages of design with computing environments even without the use of detailed data on the characteristics of buildings, features of the later stages of the project.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=a47c739a-702e-11e5-923c-bfb1b0817050
last changed	2022/06/07 07:58

_id	ijac201513203
id	ijac201513203
authors	Velikov, Kathy; Geoffrey Thün, Mary O’Malley, and Lars Junghans
year	2015
title	Computational and Physical Modeling for Multi-Cellular Pneumatic Envelope Assemblies
source	International Journal of Architectural Computing vol. 13 - no. 2, 143-169
summary	This article describes recent research on the performative, formal and aesthetic potentials of multicellular pneumatic foil-based envelope systems for lightweight, responsive building skins able to control thermal insulation and air exchange with minimal amounts of energy and mechanical components. The prototype-based research involves the use of principles from biological examples of pneus, which inform the design of physical analogue models at an architectural scale. The process entails physical-computational feedback loops wherein physical performance findings are fed into computational design models for pneumatics and membranes, as well as modified energy models, in order to advance the predictive design capacities of simulation tools in designing such systems. In this process, material agency allies with computational agency to develop novel possibilities for dynamic pneumatic envelopes.
series	journal
last changed	2019/05/24 09:55

_id	acadia15_381
id	acadia15_381
authors	Jabi, Wassim
year	2015
title	The Potential of Non-Manifold Topology in the Early Design Stages
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 381-493
doi	https://doi.org/10.52842/conf.acadia.2015.381
summary	The importance of decisions made during the early design stages has prompted researchers to advocate the use of building performance simulation (BPS) during that stage. This paper investigates non-manifold topology (NTM) as a novel approach to 3D modelling that has the potential to be highly compatible with the early design stages and with the input requirements for BPS. The proposed approach avoids the process of simplifying polyhedral models produced by Building Information Modelling (BIM) software to conduct BPS. In particular, NTM allows for a clear segmentation of a building, unambiguous space boundaries, and perfectly matched surfaces and glazing subsurfaces. The NTM approach was tested through a software prototype that integrates 3D modelling software and an energy simulation engine.
keywords	Early design stage, Non-manifold topology, Building performance simulation
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	ecaade2015_329
id	ecaade2015_329
authors	Kieferle, Joachim and Woessner, Uwe
year	2015
title	BIM Interactive - About combining BIM and Virtual Reality - A Bidirectional Interaction Method for BIM Models in Different Environments
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 69-75
doi	https://doi.org/10.52842/conf.ecaade.2015.1.069
wos	WOS:000372317300008
summary	The basic concept of BIM is a consistent 3D model of buildings containing all main data as base for collaboration for all disciplines. Since BIM-software is normally run on single workstations, the potential for direct collaboration is somehow limited. The focus of our ongoing research is to overcome these restrictions and to provide a platform for development and optimization by combining BIM and Virtual Reality (VR), linking BIM (Revit) with VR (COVISE). Projects as well as data can be visualized in VR and reviewed 1:1 scale even in team meetings. Compared to various existing approaches, our new approach is to have bidirectional data exchange between the systems. Changes in Revit are directly reflected in VR and vice versa, continuously updating the model and its underlying database. We have been able to implement a range of interactions, however it's still a long way to identify further useful interactions and to implement them.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2015_213
id	caadria2015_213
authors	Kornkasem, Sorachai and John B. Black
year	2015
title	CAAD, Cognition & Spatial Thinking Training
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 561-570
doi	https://doi.org/10.52842/conf.caadria.2015.561
summary	The current study explored different spatial training methods and investigated the sequence of processed-based mental simulation that was facilitated by various structures of external spatial representations, including 3D technology in Computer Aided-Architectural Design (CAAD), spatial cues, and/or technical languages. The goal was to better understand how these components fostered planning experiences and affected spatial ability acquisition framed as the formation of spatial mental models, for further developing spatial training environments fundamental to Science, Technology, Engineering, and Mathematics (STEM) education, specifically for architecture education and cognition. Two experiments were conducted using a between-subjects design to examine the effects of spatial training methods on spatial ability performance. Across both studies learners improved in their spatial skills, specifically the learners in the 3D-augmented virtual environments over the 3D-direct physical manipulation conditions. This study is built upon the work in the fields of computer-user interface, visuospatial thinking and human learning.
keywords	Spatial thinking training; cognitive processes; CAAD.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	caadria2015_015
id	caadria2015_015
authors	Melenbrink, Nathan and Nathan King
year	2015
title	Fulldome Interfacing
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 221-230
doi	https://doi.org/10.52842/conf.caadria.2015.221
summary	The ability to communicate design intent to potential users, clients, and communities is fundamental to the process of architectural design. Conventionally, this need is addressed through phased submissions of drawings, renderings, animations, and physical models—all with the intention of representing space and its constituent elements. Recent technological advancements however—including tools like those produced by OculusTM—have begun to present new opportunities for spatial representation through the use of simulated 3D environments that are both convenient for the design team and readily accepted by clients and end users. While immersive technologies do present novel representational opportunities, current workflows position the potential at the conclusion of the design process, not as part of it. The project presented here moves beyond mere representation and positions simulated 3D environments within the design process itself. To this end, an integrated real-time computational workflow that enables the use of simulated spatial experience as an iterative design tool was developed in order to create the illusion of being in a space while it is being designed and allowing experientially informed decision making. The Fulldome Interface creates a collaborative immersive environment that utilizes a novel computational design workflow (linking the parametric GrasshopperTM for RhinocerosTM design environment to the Unity3DTM gaming engine) that responds in real-time through dome-based stereoscopic projection that can be experienced by multiple occupants simultaneously.
keywords	Immersive; fulldome; real-time; interface; parametric design
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	sigradi2015_8.186
id	sigradi2015_8.186
authors	Robles, Rosa Maria Mendoza; Al-Attili, Aghlab
year	2015
title	Virtual Environments as an Experimental Tool for Studies of Surveillance
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 355-362.
summary	Space accepts pervasive technologies as an architectural feature inherent to design. As such, architecture is developing various links to video surveillance, crafting a new use and a new user of space. Consequently, a new type and layer of interaction is taking place in architectural space. We extend the experimental nature of 3D Virtual Environments to encompass our surveillance studies, and explore the Closed Circuit Television (CCTV). This paper contributes to the thinking of the architect positioning herself as the user of space while designing, replacing her as an empowered orchestrator of all the technologies attached to buildings.
keywords	Surveillance, CCTV, 3D Models, Design, Simulation
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	ecaade2015_265
id	ecaade2015_265
authors	Hosey, Shannon; Beorkrem, Christopher, Damiano, Ashley, Lopez, Rafael and McCall, Marlena
year	2015
title	Digital Design for Disassembly
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 371-382
doi	https://doi.org/10.52842/conf.ecaade.2015.2.371
wos	WOS:000372316000043
summary	The construction and building sector is now widely known to be one of the biggest energy consumers, carbon emitters, and creators of waste. Some architectural agendas for sustainability focus on energy efficiency of buildings that minimize their energy intake during their lifetime - through the use of more efficient mechanical systems or more insulative wall systems. One issue with these sustainability models is that they often ignore the hierarchy of energy within architectural design. The focus on the efficiency is but one aspect or system of the building assembly, when compared to the effectiveness of the whole, which often leads to ad-hoc ecology and results in the all too familiar “law of unintended consequences” (Merton, 1936). As soon as adhesive is used to connect two materials, a piece of trash is created. If designers treat material as energy, and want to use energy responsibly, they can prolong the lifetime of building material by designing for disassembly. By changing the nature of the physical relationship between materials, buildings can be reconfigured and repurposed all the while keeping materials out of a landfill. The use of smart joinery to create building assemblies which can be disassembled, has a milieu of new possibilities created through the use of digital manufacturing equipment. These tools afford designers and manufacturers the ability to create individual joints of a variety of types, which perform as well or better than conventional systems. The concept of design for disassembly is a recognizable goal of industrial design and manufacturing, but for Architecture it remains a novel approach. A classic example is Kieran Timberlake's Loblolly House, which employed material assemblies “that are detailed for on-site assembly as well as future disassembly and redeployment” (Flat, Inc, 2008). The use of nearly ubiquitous digital manufacturing tools helps designers create highly functional, precise and effective methods of connection which afford a building to be taken apart and reused or reassembled into alternative configurations or for alternative uses. This paper will survey alternative energy strategies made available through joinery using digital manufacturing and design methods, and will evaluate these strategies in their ability to create diassemblable materials which therefore use less energy - or minimize the entropy of energy over the life-cycle of the material.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=4075520a-6fe7-11e5-bcc8-f7d564ea25ed
last changed	2022/06/07 07:50

_id	acadia15_149
id	acadia15_149
authors	Lagemann, Dennis
year	2015
title	A Model to Space
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 149-159
doi	https://doi.org/10.52842/conf.acadia.2015.149
summary	Architects are used to work with models since the early beginnings of Renaissance. These models were made to conceive spatial objects before they become realized. Nowadays space seems to be outdated: There are information topologies, virtuality, and globalization. Our models are logistical rather than spatial and they become increasingly complicated. They put an emphasis on energy- or cost-efficiency rather than the vividness of a localized place. But as Architects we are supposed to be ‚masters of space’. And somehow it feels like we have lost our domain and degraded ourselves to attaching nice skins on increasingly optimized concrete- or steel-skeletons. In this sense it might be necessary to reconsider our mastership upon the articulation of space. One way to achieve this might be that computation could do more than just deliver increasingly intriguing geometries, instead it might offer us a look at the spaces conceivable but not yet imaginable: computed as information topologies and then rendered back into the geometrical framework of physical space. New media have entered our perception to a degree never imagined by future sciences of the past. So the question arises if space-time can still be considered as a single layer in actuality. As individualization takes command, being special becomes normality. In a quantized society, where many cultures coexist at the same places simultaneously, a new model to space must deal with the superposition of territories.
keywords	Models, Computation, Digitization, Architectural History/Theory, Topology <=> Geometry, Active Space, Inversion, Interlaced Fields, Paradigm Shift
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	sigradi2015_sp_8.78
id	sigradi2015_sp_8.78
authors	Bernal, Alberto Nope; Alvarado, Rodrigo García; Flores, Javier Guarachi; Carvajal, Ricardo Arellano
year	2015
title	Analysis of active solar parameters in health
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 792-796.
summary	This work was developed based on the register of health servicesin the municipality of Concepción Chile, selecting three establishments as models of concentrated consume. Technical morphological and location characteristics of each facility were analyzed in order to identify the volumetric relation, the influence of shadows and solar potential roofs and facades, linking with the future implementation of materials and technologies that present thermal and /or photovoltaic properties. The computer implementation of parameterization and simulation applied to the morphology of each facility analyzed the active parameters that affecting solar gain, stating a relationship between volume, solar collection, and the percentage of energy demand covered.
keywords	Solar Energy, Parametric Design, Active Parameters, Health Facilities, Chile
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2015_83
id	ecaade2015_83
authors	Fukuda, Tomohiro; Mori, Keisuke and Imaizumi, Jun
year	2015
title	Integration of CFD, VR, AR and BIM for Design Feedback in a Design Process - An Experimental Study
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 665-672
doi	https://doi.org/10.52842/conf.ecaade.2015.1.665
wos	WOS:000372317300072
summary	To improve indoor thermal environment, it is necessary to promote a lean design process, so forecasting and consensus building by experiment and numerical calculation from the design stage have become essential. Rapid advances in software and hardware allow feedback to be generated on novel design alternatives, rather than relying on simulation results based on past designs. However, this concept has not been fully verified. Therefore, this study presents an integrated design tool which consists of Computational Fluid Dynamics (CFD), Virtual Reality (VR), Augmented Reality (AR) and Building Information Modeling (BIM). The tool was applied to the problems of an actual housing design project. Both the content of design feedback on design problems revealed through simulations in the project, and the features in the feedback process were discussed.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2015_139
id	ecaade2015_139
authors	Krietemeyer, Bess and Rogler, Kurt
year	2015
title	Real-Time Multi-Zone Building Performance Impacts of Occupant Interaction with Dynamic Façade Systems
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 669-678
doi	https://doi.org/10.52842/conf.ecaade.2015.2.669
wos	WOS:000372316000074
summary	Recent developments in responsive electroactive materials are increasing the rate at which next-generation façade technologies can respond to environmental conditions, building energy demands, and the actions of building occupants. Simulating the real-time performance of dynamic façade systems is critical for understanding the impacts that occupant response will have on whole-building energy performance and architectural design. This paper describes a method for real-time analysis of the multi-zone building performance impacts of occupant interaction with a dynamic façade system, the Electroactive Dynamic Display System (EDDS). The objective is to optimize EDDS implementation and define system limitations, incorporate EDDS as a dynamic factor in multi-zone building energy analyses, and provide real-time feedback of building performance data based on environmental conditions and occupant interactions. Preliminary results of parametric simulation methods demonstrate the ability of dynamic façade systems to consider real-time occupant interaction in the analysis of daylighting and thermal performance of buildings.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia15_395
id	acadia15_395
authors	Tejchman, Filip
year	2015
title	The Cave Is the Campfire: Thermal Forms in Architecture
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 395-405
doi	https://doi.org/10.52842/conf.acadia.2015.395
summary	The thermal categories established by Reyner Banham are useful for identifying historical points at which structure is "liberated" from the task of being the prime controller of the environment, as well as identifying the impact on design culture, which given the freedom to invest structure with a high degree of sculptural plasticity, exaggerated the disconnect between form and thermal performance, resulting in a situation in which form is inherently viewed as incapable of performing work equivalent to mechanical systems.
keywords	Energy, Thermodynamics, Computational Fluid Dynamics, Geometry
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	acadia15_417
id	acadia15_417
authors	van der Heijden, Ramon; Levelle, Evan; Riese, Martin
year	2015
title	Parametric Building Information Generation for Design and Construction
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 417-429
doi	https://doi.org/10.52842/conf.acadia.2015.417
summary	Thermal Form, is architecture that does work. Or, it is the application of energy as information to architectural geometry, with the express purpose of using the resistance of structure against an opposing thermodynamic force, in order to manipulate and direct flows that exist in both the interior and along the exterior of a building. By examining the relationship between surface configuration, surface area and type of energy transfer occurring - with a focus on the mechanism of transfer - thermal form strategies can be used to further optimize existing building typologies and environmental control system strategies, or, perform a more radical detouring of the atmosphere of a building.
keywords	Parametric, modeling, building ,information, generation, construction, fabrication
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	acadia15_431
id	acadia15_431
authors	Winn; Kelly
year	2015
title	Transient Thermal Exchange and Developmental Form for Tactile Surfaces
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 431-441
doi	https://doi.org/10.52842/conf.acadia.2015.431
summary	The idea of an emergent or generative form based on repeating rules of development borrowed from the field of developmental biology has provided fertile ground for inspiration for architectural theory and computational design. With simple constraints developed iteratively, complex geometry and form generation can be distilled down to a list of developmental rules or functions in order to deterministically generate form. The ideas and illustrations of naturalists on organic form and developmental biology leading back to the turn of the 20th c., such as the work of D'arcy Wentworth Thompson and Ernst Haeckel, have inspired architects from Louis Sullivan all the way to contemporary generative design. This study revisits this design tradition of biomimetic geometries based on deterministic rules for the iterative development of forms based on biological analogs and models for growth. A series of semi-regular compound patterns were developed using parametric modeling and iterative rules. These geometries were then applied to surface topologies as a decorative tactile embellishment resulting in complex thermodynamic conditions. A series of physical prototypes where then developed with different high-relief patterns and pattern densities. Positive prototype geometries were then produced using stereolithography for casting plaster molds for the production molding of finished ceramic pieces for thermal analysis using digital thermography. By studying the performance of these complex geometries as physical prototypes under controlled experimentation, high-relief surfaces and the resulting thermodynamic conditions can be understood not just qualitative experience, but also quantitatively through measured performance metrics and innovative tools for analytical analysis.
keywords	Tactile surfaces, developmental biology, biomimicry, l-systems, ceramic materials, heat transfer, thermography, ergonomics
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:57

_id	caadria2024_477
id	caadria2024_477
authors	Akbaylar Hayreter, Ipek, Gulec Ozer, Derya and As Cemrek, Handan
year	2024
title	Enhancing Cultural Heritage Digitalization and Visitor Engagement Through LiDAR Scanning and Gamification
source	Nicole Gardner, Christiane M. Herr, Likai Wang, Hirano Toshiki, Sumbul Ahmad Khan (eds.), ACCELERATED DESIGN - Proceedings of the 29th CAADRIA Conference, Singapore, 20-26 April 2024, Volume 2, pp. 283–292
doi	https://doi.org/10.52842/conf.caadria.2024.2.283
summary	Cultural heritage assets are valuable, providing important information about humanity's past and conveying it to the future. Unfortunately, conventional documentation is insufficient to preserve them for the next generations. Furthermore, increasing visitor interaction with these assets and raising awareness has been one of the challenges in this field. In this paper, we will examine how mobile LiDAR (Laser Detection and Ranging) technology can be used to precisely scan and document historical sites and how it can be combined with gamification elements to provide visitors with better experiences. It is also important that the texture taken in mobile laser scanning can be used to better visualize 3D mesh models of the scanned objects, so the fastest application that produces 3D models is selected. The study area is Syedra Ancient City in Alanya / Turkey, where the research and excavation process has continued since 2015 and the restoration projects started in 2023. Future work includes the creation of experiences to provide a basis for gamification and revitalizing the story of the heritage for the visitors through digital storytelling and AR (Augmented Reality). Preserving historical sites while providing visitors with a more in-depth, vivid and enjoyable experience are important facts for enhancing cultural heritage and passing it on to future generations.
keywords	Cultural Heritage, Digitalization, LiDAR, Mobile Laser Scanning, Digital Storytelling, Augmented Reality, Gamification
series	CAADRIA
email
last changed	2024/11/17 22:05

For more results click below: