Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 494

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2016_673
id	sigradi2016_673
authors	Baquero, Pablo; Calixto, Victor; Orciuoli, Affonso; Vincent, Charles
year	2016
title	Simulation and prototyping benefits on digital fabrication [Teaching experience on previous workshops]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.981-985
summary	This paper explains how parametric methods are informed by simulation and prototyping, methods that were deployed during some series of digital fabrication workshops, their evolution and specifically with the objective of fabricating using combination of materials and CNC techniques, such as, 3d printing, laser cutting and milling machine. Teaching these workshops were the results of simulating and prototyping with students from the Biodigital Master (ESARQ UIC 2016) and a workshop done during Sigradi (Florianopolis 2015).
keywords	Teaching, 3D printing, Milling, Patterns, Collaboration, Fabrication
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2015_sp_8.78
id	sigradi2015_sp_8.78
authors	Bernal, Alberto Nope; Alvarado, Rodrigo García; Flores, Javier Guarachi; Carvajal, Ricardo Arellano
year	2015
title	Analysis of active solar parameters in health
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 792-796.
summary	This work was developed based on the register of health servicesin the municipality of Concepción Chile, selecting three establishments as models of concentrated consume. Technical morphological and location characteristics of each facility were analyzed in order to identify the volumetric relation, the influence of shadows and solar potential roofs and facades, linking with the future implementation of materials and technologies that present thermal and /or photovoltaic properties. The computer implementation of parameterization and simulation applied to the morphology of each facility analyzed the active parameters that affecting solar gain, stating a relationship between volume, solar collection, and the percentage of energy demand covered.
keywords	Solar Energy, Parametric Design, Active Parameters, Health Facilities, Chile
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2015_3.111
id	sigradi2015_3.111
authors	Brand?o, Filipe; Paio, Alexandra; Sousa, José Pedro; Rato, Vasco
year	2015
title	Cork Re-Wall. Computational Methods of Automatic Generation and Digital Fabrication of Cork Partition Walls for Building Renovation
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 86-93.
summary	Developments in computational design methods and their integration with digital fabrication processes are ushering a customized fabrication paradigm. This paradigm is particularly suited to renovation of old buildings built with traditional construction techniques, a diversified corpus in which interventions are surgical and unique, and where partition walls play the central role. Insulation Cork Board and OSB, natural and renewable materials, can have an important role in a material system that responds to this context. Cork re-Wall is a parametrically modelled construction system and a file-to-factory digital process to generate high quality custom solutions to respond to diverse renovation design challenges.
keywords	Cork, Wood Frame, Digital Fabrication, Renovation, Parametric Design
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2015_005
id	cf2015_005
authors	Celani, Gabriela; Sperling, David M. and Franco, Juarez M. S. (eds.)
year	2015
title	Preface
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 5-13.
summary	Since 1985 the Computer-Aided Architectural Design Futures Foundation has fostered high level discussions about the search for excellence in the built environment through the use of new technologies with an exploratory and critical perspective. In 2015, the 16th CAAD Futures Conference was held, for the first time, in South America, in the lively megalopolis of Sao Paulo, Brazil. In order to establish a connection to local issues, the theme of the conference was "The next city". The city of Sao Paulo was torn down and almost completely rebuilt twice, from the mid 1800s to the mid 1900s, evolving from a city built in rammed-earth to a city built in bricks and then from a city built in bricks to a city built in concrete. In the 21st century, with the widespread use of digital technologies both in the design and production of buildings, cities are changing even faster, in terms of layout, materials, shapes, textures, production methods and, above all, in terms of the information that is now embedded in built systems.Among the 200 abstracts received in the first phase, 64 were selected for presentation in the conference and publication in the Electronic Proceedings, either as long or short papers, after 3 tough evaluation stages. Each paper was reviewed by at least three different experts from an international committee of more than 80 highly experienced researchers. The authors come from 23 different countries. Among all papers, 10 come from Latin-American institutions, which have been usually under-represented in CAAD Futures. The 33 highest rated long papers are also being published in a printed book by Springer. For this reason, only their abstracts were included in this Electronic Proceedings, at the end of each chapter.The papers in this book have been organized under the following topics: (1) modeling, analyzing and simulating the city, (2) sustainability and performance of the built environment, (3) automated and parametric design, (4) building information modeling (BIM), (5) fabrication and materiality, and (6) shape studies. The first topic includes papers describing different uses of computation applied to the study of the urban environment. The second one represents one of the most important current issues in the study and design of the built environment. The third topic, automated and parametric design, is an established field of research that is finally becoming more available to practitioners. Fabrication has been a hot topic in CAAD conferences, and is becoming ever more popular. This new way of making design and buildings will soon start affecting the way cities look like. Finally, shape studies are an established and respected field in design computing that is traditionally discussed in CAAD conferences.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	caadria2017_031
id	caadria2017_031
authors	Crolla, Kristof, Williams, Nicholas, Muehlbauer, Manuel and Burry, Jane
year	2017
title	SmartNodes Pavilion - Towards Custom-optimized Nodes Applications in Construction
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 467-476
doi	https://doi.org/10.52842/conf.caadria.2017.467
summary	Recent developments in Additive Manufacturing are creating possibilities to make not only rapid prototypes, but directly manufactured customised components. This paper investigates the potential for combining standard building materials with customised nodes that are individually optimised in response to local load conditions in non-standard, irregular, or doubly curved frame structures. This research iteration uses as a vehicle for investigation the SmartNodes Pavilion, a temporary structure with 3D printed nodes built for the 2015 Bi-City Biennale of Urbanism/Architecture in Hong Kong. The pavilion is the most recent staged output of the SmartNodes Project. It builds on the findings in earlier iterations by introducing topologically constrained node forms that marry the principals of the evolved optimised node shape with topological constraints imposed to meet the printing challenges. The 4m high canopy scale prototype structure in this early design research iteration represents the node forms using plastic Fused Deposition Modelling (FDM).
keywords	Digital Fabrication; Additive Manufacturing; File to Factory; Design Optimisation; 3D printing for construction
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2015_247
id	ecaade2015_247
authors	Garcia, Manuel Jimenez and Retsin, Gilles
year	2015
title	Design Methods for Large Scale Printing
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 331-339
doi	https://doi.org/10.52842/conf.ecaade.2015.2.331
wos	WOS:000372316000039
summary	With an exponential increase in the possibilities of computation and computer-controlled fabrication, high density information is becoming a reality in digital design and architecture. However, construction methods and industrial fabrication processes have not yet been reshaped to accommodate the recent changes in those disciplines. Although it is possible to build up complex simulations with millions of particles, the simulation is often disconnected from the actual fabrication process. Our research proposes a bridge between both stages, where one drives the other, producing a smooth transition from design to production. A particle in the digital domain becomes a drop of material in the construction method.The architect's medium of expression has become much more than a representational tool in the last century, and more recently it has evolved even beyond a series of rules to drive from design to production. The design system is the instruction itself; embedding structure, material and tectonics and gets delivered to the very end of the construction chain, where it gets materialised. The research showcased in this paper investigates tectonic systems associated with large scale 3D printing and additive manufacturing methods, inheriting both material properties and fabrication constraints at all stages from design to production. Computational models and custom design software packages are designed and developed as strategies to organise material in space in response to specific structural and logistical input.Although the research has developed a wide spectrum of 3D printing methods, this paper focuses only on two of the most recent projects, where different material and computational logics were investigated. The first, titled Filamentrics, intends to develop free-form space frames, overcoming their homogeneity by introducing robotic plastic extrusion. Through the use of custom made extruders a vast range of high resolution prototypes were developed, evolving the design process towards the fabrication of precise structures that can be materialised using additive manufacturing but without the use of a layered 3D printing method. Instead, material limitations were studied and embedded in custom algorithms that allow depositing material in the air for internal connectivity. The final result is a 3x2x2.5m structure that demonstrates the viability of this construction method for being implemented in more industrial scenarios.While Filamentrics is reshaping the way we could design and build light weight structures, the second project Microstrata aims to establish new construction methods for compression based materials. A layering 3D printing method combines both the deposition of the binder and the distribution of an interconnected network of capillaries. These capillaries are organised following structural principles, configuring a series of channels which are left empty within the mass. In a second stage aluminium is cast in this hollow space to build a continuous tension reinforcement.
series	eCAADe
type	normal paper
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=07a6d8e0-6fe7-11e5-9994-cb14cd908012
last changed	2022/06/07 07:51

_id	sigradi2015_10.307
id	sigradi2015_10.307
authors	Herrera, Pablo C.
year	2015
title	Mathematics and computation: Using visual programming to develop didactic materials in a learning environment
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 581-588.
summary	We analyse the problem of creating didactic material for teaching and evaluating mathematics in the first year of a School of Architecture. By using visual programming, science professor used codes (formulae) to represent in a software their proposals, instead of drawing them themselves. Through this experience we create a database of codes with computational solutions that allows faculty to modify, reuse, visualise and print in the same platform that she students will use while developing their designs. In this way we aim to maximise the link between mathematics and design as fundamental base for the control of complex shapes.
keywords	Visual Programming, Mathematics Education, Architectural Education, Latin America, 3D Printing
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	ecaade2015_265
id	ecaade2015_265
authors	Hosey, Shannon; Beorkrem, Christopher, Damiano, Ashley, Lopez, Rafael and McCall, Marlena
year	2015
title	Digital Design for Disassembly
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 371-382
doi	https://doi.org/10.52842/conf.ecaade.2015.2.371
wos	WOS:000372316000043
summary	The construction and building sector is now widely known to be one of the biggest energy consumers, carbon emitters, and creators of waste. Some architectural agendas for sustainability focus on energy efficiency of buildings that minimize their energy intake during their lifetime - through the use of more efficient mechanical systems or more insulative wall systems. One issue with these sustainability models is that they often ignore the hierarchy of energy within architectural design. The focus on the efficiency is but one aspect or system of the building assembly, when compared to the effectiveness of the whole, which often leads to ad-hoc ecology and results in the all too familiar “law of unintended consequences” (Merton, 1936). As soon as adhesive is used to connect two materials, a piece of trash is created. If designers treat material as energy, and want to use energy responsibly, they can prolong the lifetime of building material by designing for disassembly. By changing the nature of the physical relationship between materials, buildings can be reconfigured and repurposed all the while keeping materials out of a landfill. The use of smart joinery to create building assemblies which can be disassembled, has a milieu of new possibilities created through the use of digital manufacturing equipment. These tools afford designers and manufacturers the ability to create individual joints of a variety of types, which perform as well or better than conventional systems. The concept of design for disassembly is a recognizable goal of industrial design and manufacturing, but for Architecture it remains a novel approach. A classic example is Kieran Timberlake's Loblolly House, which employed material assemblies “that are detailed for on-site assembly as well as future disassembly and redeployment” (Flat, Inc, 2008). The use of nearly ubiquitous digital manufacturing tools helps designers create highly functional, precise and effective methods of connection which afford a building to be taken apart and reused or reassembled into alternative configurations or for alternative uses. This paper will survey alternative energy strategies made available through joinery using digital manufacturing and design methods, and will evaluate these strategies in their ability to create diassemblable materials which therefore use less energy - or minimize the entropy of energy over the life-cycle of the material.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=4075520a-6fe7-11e5-bcc8-f7d564ea25ed
last changed	2022/06/07 07:50

_id	acadia15_81
id	acadia15_81
authors	Hussein, Ahmed
year	2015
title	Sandworks / Sand Tectonic Prototype
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 81-94
doi	https://doi.org/10.52842/conf.acadia.2015.081
summary	This paper outlines a material based research that proposes a time-based architecture that extends Frei Otto’s research of sand formations using sand’s natural angle of repose. The tectonic system focuses on developing compressive structures of sand for hot climate desert areas through a zero-waste formative process whose architecture reorganizes materials naturally available on the site. Formations are hardened as a surface through the phase changing properties of a saline solution which crystallizes when cooled, bonding with the sand. The proportion of insulation material defines the building life span redistributes the materials back into its environment at the end of its cycle. The materiality and spatial qualities of the project are based on the conical and constant angle surfaces generated through the gravitational process of sand formation. Between the digital opportunities of sand formation and its physical possibilities, this paper outlines the analogue-digital methods of sand computation through a comprehensive study in four main sections; material system, material computation, design system and robotic fabrication.
keywords	Material computation, analogues digital methods, Sand, Digital design and robotic fabrication, ecological tectonic system
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	ascaad2010_097
id	ascaad2010_097
authors	Kenzari, Bechir
year	2010
title	Generative Design and the Reduction of Presence
source	CAAD - Cities - Sustainability [5th International Conference Proceedings of the Arab Society for Computer Aided Architectural Design (ASCAAD 2010 / ISBN 978-1-907349-02-7], Fez (Morocco), 19-21 October 2010, pp. 97-106
summary	Digital design/fabrication is slowly emancipating architectural design from its traditional static/representational role and endowing it instead with a new, generative function. In opposition to the classical isomorphism between drawings and buildings, wherein the second stand as translations of the first, the digital design/fabrication scenario does not strictly fall within a semiotic frame as much as within a quasi biological context, reminiscent of the Aristotelian notion of entelechy. For the digital data does not represent the building as much it actively works to become the building itself. Only upon sending a given file to a machine does the building begin to materialize as an empirical reality, And eventually a habitable space as we empirically know it. And until the digital data actualizes itself, the building qua building is no more than one single, potential possibility among many others. This new universe of digital design/fabrication does not only cause buildings to be produced as quick, precise, multiply-generated objects but also reduces their presence as original entities. Like cars and fashion items, built structures will soon be manufactured as routinely-consumed items that would look original only through the subtle mechanisms of flexibility: frequent alteration of prototype design (Style 2010, Style 2015..) and “perpetual profiling” (mine, yours, hers,..). The generic will necessarily take over the circumstantial. But this truth will be veiled since “customized prototypes” will be produced or altered to individual or personal specifications. This implies that certain “myths” have to be generated to speed up consumption, to stimulate excessive use and to lock people into a continuous system which can generate consumption through a vocabulary of interchangeable, layered and repeatable functions. Samples of “next season’s buildings” will be displayed and disseminated to enforce this strategy of stimulating and channeling desire. A degree of manipulation is involved, and the consumer is flattered into believing that his or her own free assessment of and choice between the options on offer will lead him or her to select the product the advertiser is seeking to sell. From the standpoint of the architect as a maker, the rising upsurge of digital design and fabrication could leave us mourning the loss of what has been a personal stomping ground, namely the intensity of the directly lived experiences of design and building. The direct, sensuous contact with drawings, models and materials is now being lost to a (digital) realm whose attributes refer to physical reality only remotely. Unlike (analogue) drawings and buildings, digital manipulations and prototypes do not exercise themselves in a real space, and are not subjected in the most rigorous way to spatial information. They denote in this sense a loss of immediacy and a withering of corporal thought. This flexible production of space and the consequent loss of immediate experience from the part of the designer will be analyzed within a theoretical framework underpinned mainly by the works of Walter Benjamin. Samples of digitally-produced objects will be used to illustrate this argument.
series	ASCAAD
email
last changed	2011/03/01 07:36

_id	sigradi2015_10.250
id	sigradi2015_10.250
authors	Linardi, Ana Beatriz; Ramos, Fernando da Silva; Garotti, Flavio Valverde; Damiani, Vitor
year	2015
title	3D printing as support for arts education for the visually impaired
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 564-568.
summary	This article discusses some methodologies in art education in schools and educational activities in museums. It focuses on accessibility and in the visually impaired rights to access and improve the experiences and repertoire in artistic languages, recognizing the use of new technologies in the field of digital manufacturing as valuable resources for the production of teaching materials with the use of cheaper and accessible technology, which expands the access to cultural institutions and education. Considering that most of the museums art works are not to be touched, 3D printing reproductions in durable low cost plastic present as an alternative for tactile experience. In addition, the photogrammetric 3D scanning process and digital editing allow for the creation of isolated parts and materials originated from the art piece, broadening the pedagogical possibilities of art educators. The production of didactic material for arts teaching, with the use of 3D printed copies (edited or not) originated from 3D scans, may help revealing a more subtle and sophisticated aspect of artistic narrative to the public and the visually impaired.
keywords	Education, Art, 3D Scan, 3D Printing
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ecaade2015_302
id	ecaade2015_302
authors	Martins, Pedro Filipe; Campos, Paulo Fonsecade, Nunes, Sandra and Sousa, Jose Pedro
year	2015
title	Expanding the Material Possibilities of Lightweight Prefabrication in Concrete Through Robotic Hot-Wire Cutting - Form, Texture and Composition
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 341-351
doi	https://doi.org/10.52842/conf.ecaade.2015.2.341
wos	WOS:000372316000040
summary	In recent years, digital fabrication technologies have enabled renewed explorations into traditional materials, with innovative results. This paper focuses on concrete and on the potentials of a specific technology: robotic hot-wire cutting for the production of expanded polystyrene (EPS) formwork. Academia and industry have explored this process recently but the number of works built with this technology is reduced and the general concrete prefabrication industry has been slow to adopt it. In this context, this paper analyzes the use of EPS in the production of concrete formwork by reviewing its application in contemporary examples. In order to develop a clear assessment of the possibilities of expanding prefabrication in concrete using robotic hot-wire cutting, this paper also documents a set of practical experiments developed in the laboratory, addressing three material challenges: form; texture and composition. This research involved the design, formwork production and casting of concrete elements to explore the limits and characterize the process of robotic hot-wire fabrication in the context of concrete prefabrication. By recognizing the different approaches present in contemporary examples and in the explored practical experiments, we point out the advantages and limitations of using hot-wire cutting, and develop the reasons behind its limited application in practice.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=b9eb5cf6-6fe7-11e5-a012-0f427063eef2
last changed	2022/06/07 07:59

_id	ecaade2015_228
id	ecaade2015_228
authors	Matcha, Heike
year	2015
title	Parametrized Systems: Conceiving of Buildings as Assemblies of Varied Parts
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 143-148
doi	https://doi.org/10.52842/conf.ecaade.2015.2.143
wos	WOS:000372316000018
summary	We describe and discuss a design and research project that together with students explores the new possibilities current design tools and manufacturing processes give architects to design systems for building components that transcend the limits of fordist serial mass production in favour of post-fordist individualized mass production, most importantly the supersession of a few equal building components for many similar ones. Contrary to many projects with similar content and intent, ours starts not with the digital tools but with production techniques and materials. Constant physical materialization plays the main role, digital tools assist.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=7972f824-6e8d-11e5-b2e1-0b3359ba614e
last changed	2022/06/07 07:59

_id	ijac201513205
id	ijac201513205
authors	Nahmad Vazquez, Alicia and Wassim Jabi
year	2015
title	A Collaborative Approach to Digital Fabrication:A Case Study for the Design and Production of Concrete ‘Pop-up’ Structures
source	International Journal of Architectural Computing vol. 13 - no. 2, 195-216
summary	The research presented in this paper utilizes industrial robotic arms and new material technologies to model and explore a prototypical workflow for on-site robotic collaboration based on feedback loops. This workflow will ultimately allow for the construction of customized, free-form, on-site concrete structures without the need for complex formwork. The paper starts with an explanation of the relevance of collaborative robotics through history in the industry and in architecture. An argument is put forward for the need to move towards the development of collaborative processes based on feedback loops amongst the designer, the robot and the material, where they all inform each other continuously. This kind of process, with different degrees of autonomy and agency for each actor, is necessary for on-site deployment of robots. A test scenario is described using an innovative material named concrete canvas that exhibits hybrid soft fabric and rigid thin-shell tectonics. This research project illustrates the benefits of integrating information-embedded materials, masscustomization and feedback loops. Geometry scanning, parametric perforation pattern control, computational analysis and simulation, and robotic fabrication were integrated within a digital fabrication deployment scenario. The paper concludes with a detailed report of research findings and an outline for future work.
series	journal
last changed	2019/05/24 09:55

_id	acadia15_251
id	acadia15_251
authors	Pedro Sousa, José; Veiga, Germano; Moreira, A. Paulo
year	2015
title	Robotic Fabrication with Cork: Emerging Opportunities in Architecture and Building Construction
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 251-260
doi	https://doi.org/10.52842/conf.acadia.2015.251
summary	In the last two decades, CAD/CAM technologies have opened new conceptual and material opportunities in architecture. By combining computational design and digital fabrication technologies, architects have embraced a higher level of geometric complexity and variability in their solutions. Such non-standard possibilities were expanded with the recent introduction of robotic technologies in the discipline, which have allowed moving beyond the fabrication of building components to reach the construction of building parts. As a result of this digital condition, traditional materials have known innovative applications in architecture. In this context, this paper presents cork, which is a natural and recyclable material. By describing its unique set of properties and features, it argues about its relevance for the building construction in the present times. With this underlying motivation, this paper defines the current state of the research in architecture on the use of robotic fabrication with cork. It does so by describing and illustrating a set of different experiments conducted by the authors in their academic institutions. The results unveil a set of innovative applications of cork in building construction, and, at the same time, contribute to show how robotic technologies can be used to rethink and update traditional and old materials in architecture.
keywords	Building Construction, Cork, CAD/CAM, Robotic Fabrication, Design Customization
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	sigradi2015_3.201
id	sigradi2015_3.201
authors	Sperling, David M.; Vandier, Inácio; Scheeren, Rodrigo
year	2015
title	Feeling the space: design with tactile models
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 108-112.
summary	The article presents the pedagogical experience of the elective course “Feel the space: design with tactile models” held at the Institute of Architecture and Urbanism of USP / S?o Carlos in 2014. From the critique of the primacy of seeing, the experimental activity proposed a housing design process with a visually impaired person, using models, plants and tactile maps. Were investigated and compared the free use of materials and processes with the use of digital fabrication - MDF plates manufactured with a laser cutting machine. As a result, it is presented the tactile representation system developed in the activity.
keywords	Design, Perception, Representation, Tactile Models, Digital Fabrication
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	sigradi2015_10.56
id	sigradi2015_10.56
authors	Stumpp, Monika Maria; Buffon, Patrícia; Costa, Julia Zecchin; Manica, Carlo Rossano; Brasil, Rodrigo Rosa de Assis
year	2015
title	The digital graphic representation for the presentation of architectural projects: A look at the production of young Brazilian architects
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 502-505.
summary	This article aims to contribute to the understanding of how computer graphics tools and conventional graphic techniques are articulated in the representation of architectural projects and how such techniques are being used for the dissemination of architectural projects for society. It presents a case study of a research, which aims to build by sampling a framework that reflects the contemporary graphical representation practices in architectural projects in Brazil. It features a study involving the analysis of graphic materials published in the website of an architectural office (Metro). It investigates whether there is association between the computational tools with conventional graphic techniques in disseminating their work
keywords	Architectural Representation, Architectural Design, Contemporary
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	acadia15_69
id	acadia15_69
authors	Wilcox, Glenn; Trandafirescu, Anca
year	2015
title	C-Lith: Carbon Fiber Architectural Units
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 69-79
doi	https://doi.org/10.52842/conf.acadia.2015.069
summary	C-LITH is the reconsideration of the architectural building unit through the exploration of new composite techniques and materials. Our project develops individual compo- nents that exploit the strength, lightness, and variability possible with carbon ber laments when paired with computation, digital fabrication, and hand assembly. Traditionally, architectural units made of brick or concrete are small and multiple, heavy, dif cult to vary, and are much better in compression than tension. Using carbon ber laments to create variable units allows for larger individual units that can vary in both shape and structural performance as needed. Our units, developed through winding pre-preg carbon ber tow around disposable molds, bene t structurally from the quasi-isotropic properties that are developed through the winding patterns. The specific structural capacities of the units remain to be understood through further testing and analysis, which falls outside the scope of this current research. At this junction, structural capacities have been determined empirically, i.e. will it stand? Most importantly, as a formal study, our units address the use of carbon ber at the scale of architectural production. A majority of the effort involved in materializing C-LITH was the development of a two-fold prototypical manufacturing process that produces the components and assembly. For this we invented a method to quickly and cheaply construct variable cardboard molds that could withstand the wound casting and baking steps, but could also be easily weakened through water immersion to be removed. For the assembly we developed a rigid dummy-jig system to hold the joint plates in position with a high level of precision but could also incrementally absorb the adjustment errors unavoidable in hand assembly systems. Using a simple pin connection the resultant structures can be easily disassembled for transportation and reassembly elsewhere.
keywords	Carbon Fiber Composite, Variability, Fabrication, Computation, Coding, Molds, Jigging, Assembly
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:57

_id	acadia15_431
id	acadia15_431
authors	Winn; Kelly
year	2015
title	Transient Thermal Exchange and Developmental Form for Tactile Surfaces
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 431-441
doi	https://doi.org/10.52842/conf.acadia.2015.431
summary	The idea of an emergent or generative form based on repeating rules of development borrowed from the field of developmental biology has provided fertile ground for inspiration for architectural theory and computational design. With simple constraints developed iteratively, complex geometry and form generation can be distilled down to a list of developmental rules or functions in order to deterministically generate form. The ideas and illustrations of naturalists on organic form and developmental biology leading back to the turn of the 20th c., such as the work of D'arcy Wentworth Thompson and Ernst Haeckel, have inspired architects from Louis Sullivan all the way to contemporary generative design. This study revisits this design tradition of biomimetic geometries based on deterministic rules for the iterative development of forms based on biological analogs and models for growth. A series of semi-regular compound patterns were developed using parametric modeling and iterative rules. These geometries were then applied to surface topologies as a decorative tactile embellishment resulting in complex thermodynamic conditions. A series of physical prototypes where then developed with different high-relief patterns and pattern densities. Positive prototype geometries were then produced using stereolithography for casting plaster molds for the production molding of finished ceramic pieces for thermal analysis using digital thermography. By studying the performance of these complex geometries as physical prototypes under controlled experimentation, high-relief surfaces and the resulting thermodynamic conditions can be understood not just qualitative experience, but also quantitatively through measured performance metrics and innovative tools for analytical analysis.
keywords	Tactile surfaces, developmental biology, biomimicry, l-systems, ceramic materials, heat transfer, thermography, ergonomics
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:57

_id	caadria2024_477
id	caadria2024_477
authors	Akbaylar Hayreter, Ipek, Gulec Ozer, Derya and As Cemrek, Handan
year	2024
title	Enhancing Cultural Heritage Digitalization and Visitor Engagement Through LiDAR Scanning and Gamification
source	Nicole Gardner, Christiane M. Herr, Likai Wang, Hirano Toshiki, Sumbul Ahmad Khan (eds.), ACCELERATED DESIGN - Proceedings of the 29th CAADRIA Conference, Singapore, 20-26 April 2024, Volume 2, pp. 283–292
doi	https://doi.org/10.52842/conf.caadria.2024.2.283
summary	Cultural heritage assets are valuable, providing important information about humanity's past and conveying it to the future. Unfortunately, conventional documentation is insufficient to preserve them for the next generations. Furthermore, increasing visitor interaction with these assets and raising awareness has been one of the challenges in this field. In this paper, we will examine how mobile LiDAR (Laser Detection and Ranging) technology can be used to precisely scan and document historical sites and how it can be combined with gamification elements to provide visitors with better experiences. It is also important that the texture taken in mobile laser scanning can be used to better visualize 3D mesh models of the scanned objects, so the fastest application that produces 3D models is selected. The study area is Syedra Ancient City in Alanya / Turkey, where the research and excavation process has continued since 2015 and the restoration projects started in 2023. Future work includes the creation of experiences to provide a basis for gamification and revitalizing the story of the heritage for the visitors through digital storytelling and AR (Augmented Reality). Preserving historical sites while providing visitors with a more in-depth, vivid and enjoyable experience are important facts for enhancing cultural heritage and passing it on to future generations.
keywords	Cultural Heritage, Digitalization, LiDAR, Mobile Laser Scanning, Digital Storytelling, Augmented Reality, Gamification
series	CAADRIA
email
last changed	2024/11/17 22:05

For more results click below: