Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 111

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2017_031
id	caadria2017_031
authors	Crolla, Kristof, Williams, Nicholas, Muehlbauer, Manuel and Burry, Jane
year	2017
title	SmartNodes Pavilion - Towards Custom-optimized Nodes Applications in Construction
doi	https://doi.org/10.52842/conf.caadria.2017.467
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 467-476
summary	Recent developments in Additive Manufacturing are creating possibilities to make not only rapid prototypes, but directly manufactured customised components. This paper investigates the potential for combining standard building materials with customised nodes that are individually optimised in response to local load conditions in non-standard, irregular, or doubly curved frame structures. This research iteration uses as a vehicle for investigation the SmartNodes Pavilion, a temporary structure with 3D printed nodes built for the 2015 Bi-City Biennale of Urbanism/Architecture in Hong Kong. The pavilion is the most recent staged output of the SmartNodes Project. It builds on the findings in earlier iterations by introducing topologically constrained node forms that marry the principals of the evolved optimised node shape with topological constraints imposed to meet the printing challenges. The 4m high canopy scale prototype structure in this early design research iteration represents the node forms using plastic Fused Deposition Modelling (FDM).
keywords	Digital Fabrication; Additive Manufacturing; File to Factory; Design Optimisation; 3D printing for construction
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2015_9.330
id	sigradi2015_9.330
authors	Andrade, Max; Assis, Jonas; Brochardt, Mikael
year	2015
title	The Portable Viewers Use as Increase Factor in Productivity of Civil Construction
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 473-480.
summary	The potential of Building Information Modeling (BIM) as booster of productivity in construction can be better explorer using solutions of information visualization in digital environment, using tablets and smartphones. The maintenance of the project in digital environment at the construction site has several advantages over the use of printed designs, enabling improvements in the flow, quality and quantity of information in the enforcement phase. In BIM, this solution is further efficient, exploiting its wealth of information. This article examines portable visualization tools concerning resources and suitability for use in construction sites, forming a comparative and suggestive overview of these applications.
keywords	BIM, Visualization, Information, Application, Productivity
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2015_317
id	ecaade2015_317
authors	Cavieres, Andres and Gentry, Russell
year	2015
title	Masonry Regions: A New Approach for the Representation of Masonry Walls in BIM Applications
doi	https://doi.org/10.52842/conf.ecaade.2015.1.585
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 585-595
summary	The article describes the theoretical approach for the development of computational representations of masonry walls based on the concept of regions. A masonry region is intended to support the description of various levels of detail pertaining to a masonry wall assembly, capturing the evolution and complexity of design information from early conceptual stages down to construction and operation. Since different wall types are characterized by a different set of domain-specific requirements, a special emphasis is put on a flexible strategy for classification of different types of view-dependent masonry regions. This classification will provide the foundation upon which masonry specific parametric modeling and rule-checking applications can be elaborated in the future. It will also provide the basis for the definition of model views necessary for particular data queries and exchanges between design stakeholders. The article introduces the concept of regions, and discusses its implications and future steps.
wos	WOS:000372317300063
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2015_91
id	ecaade2015_91
authors	Correia, Hugo and Leitão, António
year	2015
title	Extending Processing to CAD applications
doi	https://doi.org/10.52842/conf.ecaade.2015.1.159
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 159-167
summary	The Processing language was created to teach programming to the design, architecture, and electronic arts communities. Despite its success, Processing has limited applicability in the architectural realm, as no CAD (Computer-Aided Design) or BIM (Building Information Modeling) application supports Processing. As a result, architects that have learnt Processing are unable to use the language in the context of modern, script-based, architectural work. This work joins Processing with the world of CAD or BIM applications, creating a solution that allows architects to prototype new designs using Processing and generate results in a CAD or BIM application. To achieve this, we developed an implementation of Processing for the Rosetta programming environment, allowing Processing scripts to generate 2D and 3D models in a variety of CAD or BIM applications, such as AutoCAD, Rhinoceros3D, SketchUp, and Revit.
wos	WOS:000372317300017
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=1c251750-70c8-11e5-9996-33e39ead7b04
last changed	2022/06/07 07:56

_id	ecaade2015_118
id	ecaade2015_118
authors	Ferreira, Bruno and Leitão, António
year	2015
title	Generative Design for Building Information Modeling
doi	https://doi.org/10.52842/conf.ecaade.2015.1.635
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 635-644
summary	Generative Design (GD) is a programming-based approach for Architecture that is becoming increasingly popular amongst architects. However, most Generative Design approaches were thought for traditional Computer Aided Design (CAD) tools and are not adequate for the Building Information Modeling (BIM) paradigm. This paper proposes a solution that extends GD to be used with BIM applications while preserving and taking advantage of its ideas. The solution will be evaluated by developing a connection between Revit, a well-known BIM tool, and Rosetta, a programming environment for GD, and by implementing the necessary programming language features that allows GD to be used in the context of BIM tool.
wos	WOS:000372317300069
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=cba54e6e-7025-11e5-81ea-00190f04dc4c
last changed	2022/06/07 07:50

_id	sigradi2020_392
id	sigradi2020_392
authors	Fialho, Beatriz Campos; Codinhoto, Ricardo; Fabricio, Márcio Minto
year	2020
title	BIM and IoT for the AEC Industry: A systematic literature mapping
source	SIGraDi 2020 [Proceedings of the 24th Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Online Conference 18 - 20 November 2020, pp. 392-399
summary	The AEC industry has been facing a digital transformation for improving services involved in buildings lifecycle, fostered by two disruptive technologies: Building Information Modelling (BIM) and Internet of Things (IoT). However, the literature lacks discussions regarding applications and challenges of BIM and IoT systems in the AEC. This Systematic Literature Mapping addresses this gap through search, analysis, and classification of 75 journal article abstracts published between 2015 and 2019. An increase of articles over the period is observed, predominantly with technical and processual solutions for Construction and Operation and Maintenance. The interoperability of data is a key challenge to organizations.
keywords	Building Information Modelling, Internet of Things, Integration, Network, Smart Cities
series	SIGraDi
email
last changed	2021/07/16 11:49

_id	ecaade2018_243
id	ecaade2018_243
authors	Gardner, Nicole
year	2018
title	Architecture-Human-Machine (re)configurations - Examining computational design in practice
doi	https://doi.org/10.52842/conf.ecaade.2018.2.139
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 139-148
summary	This paper outlines a research project that explores the participation in, and perception of, advanced technologies in architectural professional practice through a sociotechnical lens and presents empirical research findings from an online survey distributed to employees in five large-scale architectural practices in Sydney, Australia. This argues that while the computational design paradigm might be well accepted, understood, and documented in academic research contexts, the extent and ways that computational design thinking and methods are put-into-practice has to date been less explored. In engineering and construction, technology adoption studies since the mid 1990s have measured information technology (IT) use (Howard et al. 1998; Samuelson and Björk 2013). In architecture, research has also focused on quantifying IT use (Cichocka 2017), as well as the examination of specific practices such as building information modelling (BIM) (Cardoso Llach 2017; Herr and Fischer 2017; Son et al. 2015). With the notable exceptions of Daniel Cardoso Llach (2015; 2017) and Yanni Loukissas (2012), few scholars have explored advanced technologies in architectural practice from a sociotechnical perspective. This paper argues that a sociotechnical lens can net valuable insights into advanced technology engagement to inform pedagogical approaches in architectural education as well as strategies for continuing professional development.
keywords	Computational design; Sociotechnical system; Technology adoption
series	eCAADe
email
last changed	2022/06/07 07:51

_id	cf2015_381
id	cf2015_381
authors	Menegotto, José Luis
year	2015
title	A framework for speech-oriented CAD and BIM systems
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 381.
summary	This article discusses the development of a Speech Oriented Graphics Interface embedded in CAD and BIM software. The aim is to provide the means to work with complex 3D BIM models with minimal touch operations. We can cite the growing need for tools and user interfaces to assist designers in handling complex models, minimizing the risk of producing changes accidentally. In this area, the integration of a graphical database in BIM applications can be seen as an advantage over traditional CAD applications. However, we can note a difficulty in this integration, due to the need to maintain the constant levels of mental concentration required in order to effectively manage a larger inter-connected graphical database. Specifically in this area, voice interfaces can help by avoiding the need of "touch" to work with the 3D models, looking for improving its robustness and consistency. In addition, SR is used in order to reduce cognitive stress among the users, trying eliminating the need to memorize and remember commands, names and locations in GUI interfaces.
keywords	Accessibility, Text to Speech, Speech Recognition, CAD-BIM.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	caadria2015_203
id	caadria2015_203
authors	Nakapan, Walaiporn
year	2015
title	Challenge of Teaching BIM in the First Year of University
doi	https://doi.org/10.52842/conf.caadria.2015.509
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 509-518
summary	This paper presents an experience about BIM curriculum from Faculty of Architecture, Rangsit University, which has been implemented since 2010. Our approach is to introduce BIM into the first year architectural design curriculum both as a tool and as a new way to practice design. The objective of this paper is to identify problems encountered from the class and typical misconceptions about BIM curriculum based on our experience. Problems encountered are 1) The need to boost students’ attention, 2) The lack of acceptability criteria of the students’ design flaws, 3) The lack of BIM Guideline to be used in the curriculum, and 4) The need to grow the BIM thinking in other advanced studios. Typical misconceptions identified are 1) BIM is just another design tool 2) Traditional design process can be used in a BIM design studio, and 3) BIM limits creativity. Finally, we propose how to improve the curriculum and compare the BIM design process to traditional design process.
keywords	BIM; Curriculum; Education.
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	caadria2018_016
id	caadria2018_016
authors	Zahedi, Ata and Petzold, Frank
year	2018
title	Utilization of Simulation Tools in Early Design Phases Through Adaptive Detailing Strategies
doi	https://doi.org/10.52842/conf.caadria.2018.2.011
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 11-20
summary	Decisions taken at early stages of building design have a significant effect on the planning steps for the entire lifetime of the project as well as the performance of the building throughout its lifecycle (MacLeamy 2004). Building Information Modelling (BIM) could bring forward and enhance the planning and decision-making processes by enabling the direct reuse of data hold by the model for diverse analysis and simulation tasks (Borrmann et al. 2015). The architect today besides a couple of simplified simulation tools almost exclusively uses his know-how for evaluating and comparing design variants in the early stages of design. This paper focuses on finding new ways to facilitate the use of analytical and simulation tools during the important early phases of conceptual building design, where the models are partially incomplete. The necessary enrichment and proper detailing of the design model could be achieved by means of dialogue-based interaction concepts with analytical and simulation tools through adaptive detailing strategies. This concept is explained using an example scenario for design process. A generic description of the aimed dialog-based interface to various simulation tools will also be discussed in this paper using an example scenario.
keywords	BIM; Early Design Stages; Adaptive Detailing ; Communication Protocols; Design Variants
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	acadia19_360
id	acadia19_360
authors	Dackiw, Jean-Nicolas Alois; Foltman, Andrzej; Garivani, Soroush; Kaseman, Keith; Sollazzo, Aldo
year	2019
title	Cyber-physical UAV Navigation and Operation
doi	https://doi.org/10.52842/conf.acadia.2019.360
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 360-367
summary	The purpose of this paper is to present a work in progress pertaining to drone pose estimation and flight calibration. This paper intends to underline the increasing importance of determining alternative path planning instruments through accurate localization for Unmanned Aerial Vehicles (UAVs) with the purpose of achieving complex flight operations for the emerging applications of autonomous robotics in surveying, design, fabrication, and on-site operations. This research is based on the implementation of novel technologies such as Augmented Reality (AR), Robot Operating System (ROS), and computational approaches to define a drone calibration methodology, leveraging existing methods for drone path planning. Drones are equipped with measurement systems to provide geo-location and time information such as onboard Global Positioning System (GPS) sensors, and Inertial Measurement Units (IMU). As stated in previous research, to increase navigation capabilities, measurements and data processing algorithms have a critical role (Daponte et al. 2015). The outcome of this work in progress showcases valuable results in calculating and assessing accurate positioning for UAVs, and developing data exchanges in transmission, reception, and tracking.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	sigradi2023_416
id	sigradi2023_416
authors	Machado Fagundes, Cristian Vinicius, Miotto Bruscato, Léia, Paiva Ponzio, Angelica and Chornobai, Sara Regiane
year	2023
title	Parametric environment for internalization and classification of models generated by the Shap-E tool
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1689–1698
summary	Computing has been increasingly employed in design environments, primarily to perform calculations and logical decisions faster than humans could, enabling tasks that would be impossible or too time-consuming to execute manually. Various studies highlight the use of digital tools and technologies in diverse methods, such as parametric modeling and evolutionary algorithms, for exploring and optimizing alternatives in architecture, design, and engineering (Martino, 2015; Fagundes, 2019). Currently, there is a growing emergence of intelligent models that increasingly integrate computers into the design process. Demonstrating great potential for initial ideation, artificial intelligence (AI) models like Shap-E (Nichol et al., 2023) by OpenAI stand out. Although this model falls short of state-of-the-art sample quality, it is among the most efficient orders of magnitude for generating three-dimensional models through AI interfaces, offering practical balance for certain use cases. Thus, aiming to explore this gap, the presented study proposes an innovative design agency framework by employing Shap-E connected with parametric modeling in the design process. The generation tool has shown promising results; through generations of synthetic views conditioned by text captions, its final output is a mesh. However, due to the lack of topological information in models generated by Shap-E, we propose to fill this gap by transferring data to a parametric three-dimensional surface modeling environment. Consequently, this interaction's use aims to enable the transformation of the mesh into quantifiable surfaces, subject to collection and optimization of dimensional data of objects. Moreover, this work seeks to enable the creation of artificial databases through formal categorization of parameterized outputs using the K-means algorithm. For this purpose, the study methodologically orients itself in a four-step exploratory experimental process: (1) creation of models generated by Shap-E in a pressing manner; (2) use of parametric modeling to internalize models into the Grasshopper environment; (3) generation of optimized alternatives using the evolutionary algorithm (Biomorpher); (4) and classification of models using the K-means algorithm. Thus, the presented study proposes, through an environment of internalization and classification of models generated by the Shap-E tool, to contribute to the construction of a new design agency methodology in the decision-making process of design. So far, this research has resulted in the generation and classification of a diverse set of three-dimensional shapes. These shapes are grouped for potential applications in machine learning, in addition to providing insights for the refinement and detailed exploration of forms.
keywords	Shap-E, Parametric Design, Evolutionary Algorithm, Synthetic Database, Artificial Intelligence
series	SIGraDi
email
last changed	2024/03/08 14:09

_id	ecaade2015_247
id	ecaade2015_247
authors	Garcia, Manuel Jimenez and Retsin, Gilles
year	2015
title	Design Methods for Large Scale Printing
doi	https://doi.org/10.52842/conf.ecaade.2015.2.331
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 331-339
summary	With an exponential increase in the possibilities of computation and computer-controlled fabrication, high density information is becoming a reality in digital design and architecture. However, construction methods and industrial fabrication processes have not yet been reshaped to accommodate the recent changes in those disciplines. Although it is possible to build up complex simulations with millions of particles, the simulation is often disconnected from the actual fabrication process. Our research proposes a bridge between both stages, where one drives the other, producing a smooth transition from design to production. A particle in the digital domain becomes a drop of material in the construction method.The architect's medium of expression has become much more than a representational tool in the last century, and more recently it has evolved even beyond a series of rules to drive from design to production. The design system is the instruction itself; embedding structure, material and tectonics and gets delivered to the very end of the construction chain, where it gets materialised. The research showcased in this paper investigates tectonic systems associated with large scale 3D printing and additive manufacturing methods, inheriting both material properties and fabrication constraints at all stages from design to production. Computational models and custom design software packages are designed and developed as strategies to organise material in space in response to specific structural and logistical input.Although the research has developed a wide spectrum of 3D printing methods, this paper focuses only on two of the most recent projects, where different material and computational logics were investigated. The first, titled Filamentrics, intends to develop free-form space frames, overcoming their homogeneity by introducing robotic plastic extrusion. Through the use of custom made extruders a vast range of high resolution prototypes were developed, evolving the design process towards the fabrication of precise structures that can be materialised using additive manufacturing but without the use of a layered 3D printing method. Instead, material limitations were studied and embedded in custom algorithms that allow depositing material in the air for internal connectivity. The final result is a 3x2x2.5m structure that demonstrates the viability of this construction method for being implemented in more industrial scenarios.While Filamentrics is reshaping the way we could design and build light weight structures, the second project Microstrata aims to establish new construction methods for compression based materials. A layering 3D printing method combines both the deposition of the binder and the distribution of an interconnected network of capillaries. These capillaries are organised following structural principles, configuring a series of channels which are left empty within the mass. In a second stage aluminium is cast in this hollow space to build a continuous tension reinforcement.
wos	WOS:000372316000039
series	eCAADe
type	normal paper
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=07a6d8e0-6fe7-11e5-9994-cb14cd908012
last changed	2022/06/07 07:51

_id	ecaade2015_285
id	ecaade2015_285
authors	Lopes, João V.; Paio, Alexandra, Beirão, José N., Pinho, Eliana Manuel and Nunes, Luís
year	2015
title	Multidimensional Analysis of Public Open Spaces - Urban Morphology, Parametric Modelling and Data Mining
doi	https://doi.org/10.52842/conf.ecaade.2015.1.351
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 351-360
summary	Public open spaces (parks, squares and other gathering places) can only be grasped from a simultaneous view of their attributes. In an ongoing Phd research project we propose to overcome the limitations of traditional-descriptive urban morphology methods in dealing with this simultaneity derived from their many shapes, functions, uses and relations within the urban structure. After developing the relations between formal attributes and intangible spatial properties, their identity and proximity may be disclosed by multivariate statistical analysis and data mining techniques. We outline a multidimensional method for the synchronic analysis and classification of the public open spaces departing from a research corpus of 126 Portuguese urban squares, whose analysis is intended to interactively (re)define it. The work done so far is presented, which comprises: (i) firming the concepts, criteria and attributes to extract; (ii) survey on theories, methods and spatial analysis tools and shortcomings identification; (iii) adaptation and/or creation of new methods and tools; (iv) creation of databases from CAD and GIS environments; (v) research on multivariate analysis, data mining and data visualization techniques.
wos	WOS:000372317300038
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=975efcfa-7029-11e5-a1a9-9786dd4d89a9
last changed	2022/06/07 07:59

_id	sigradi2015_8.81
id	sigradi2015_8.81
authors	Alvarado, Rodrigo García; Lobos, Danny; Nope, Alberto; Tinapp, Frank
year	2015
title	BIM + UAV Assessment of Roofs’ Solar Potential
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 336-340.
summary	This paper describes a novel method for determining the capacity to generate solar energy integrated into the roofs of buildings by aerial survey using UAVs and BIM models for sizing the covering surfaces and integration of solar panels. Various digital procedures are enchained like planning of trajectories, image processing, geometric reconstitution, simulation of solar radiation and calculation of energy generation to promote on-site installation of clean energy sources in existing buildings, to ensure a more sustainable habitat.
keywords	BIM, UAV, Solar Energy, Sustainable Building
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2015_130
id	ecaade2015_130
authors	Asl, Mohammad Rahmani; Stoupine, Alexander, Zarrinmehr, Saied and Yan, Wei
year	2015
title	Optimo: A BIM-based Multi-Objective Optimization Tool Utilizing Visual Programming for High Performance Building Design
doi	https://doi.org/10.52842/conf.ecaade.2015.1.673
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 673-682
summary	Within the architecture, engineering, and construction (AEC) industry, the application of multidisciplinary optimization methods has been shown to reach significant improvements in building performance compared to conventional design methods. As a result, the use of multidisciplinary optimization in the process of design is growing and becoming a common method that provides desired performance feedback for decision making. However, there is a lack of BIM-based multidisciplinary optimization tools that use the rich information stored in Building Information Models (BIM) to help designers explore design alternatives across multiple competing design criteria. In this paper we introduce Optimo, an open-source visual programming-based Multi-Objective Optimization (MOO) tool, which is developed to parametrically interact with Autodesk Revit for BIM-based optimization. The paper details the development process of Optimo and also provides the initial validation of its results using optimization test functions. Finally, strengths, limitations, current adoption by academia and industry, and future improvements of Optimo for building performance optimization are discussed.
wos	WOS:000372317300073
series	eCAADe
email
last changed	2022/06/07 07:54

_id	cf2015_380
id	cf2015_380
authors	Barekati, Ehsan; Clayton, Mark J. and Yan, Wei
year	2015
title	A BIM-compatible schema for architectural programming information
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 380.
summary	Architectural programming, although a key part of AECFM processes, has not been well integrated into Building Information Modeling (BIM). Having access to architectural programming information throughout the lifecycle of a building can add value to design evaluation, facility management, renovation and extension. There is not currently a comprehensive and standard data model to store architectural programming information. Our research is producing a universal format for an architectural program of requirements (UFPOR) that can connect the architectural programming information to the IFC BIM schema. The result is a data model for architectural programming that is inherently interoperable with BIM standard schema. A graphical user interface facilitates data creation and manipulation. The schema and effectiveness of the bridging fields has been tested by entering the content of three two different architectural programming documents into the UFPOR database.
keywords	BIM, Architectural Programming, Data Modelling, Interoperability, IFC.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	ecaade2015_116
id	ecaade2015_116
authors	Bieg, Kory
year	2015
title	SUPRAFICIAL: Building (an) Information Network
doi	https://doi.org/10.52842/conf.ecaade.2015.1.277
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 277-284
summary	This paper explores the potential of using multiple software programs to generate an adaptable, cross-platform Building Information Network to unlock new territories of form-making and design. By using multiple software packages to overcome the limitations imposed by current BIM (Building Information Model) programs and mono-scalar design approaches, we can design a buildings form, envelope, and materiality through an adaptable, parametric design process that uses the best features of each software program, allows non-computational input to inform form, and takes advantage of a designer's unique self-expression.
wos	WOS:000372317300030
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=40efae5a-702e-11e5-83aa-771f3575946f
last changed	2022/06/07 07:52

_id	cf2015_331
id	cf2015_331
authors	Brodeschi, Michal; Pilosof, Nirit Putievsky and Kalay, Yehuda E.
year	2015
title	The definition of semantic of spaces in virtual built environments oriented to BIM implementation
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 331-346.
summary	The BIM today can be a provider of inputs to performance analysis of different phenomena such as thermal comfort, energy consumption or winds. All these assessments are fundamental to the post occupation of the building. The attainment of approximate information of how the future building would behave under these conditions will reduce the waste of materials and energy resources. The same idea is used for evaluating the users occupation. Through simulation of human behavior is possible to evaluate which design elements can be improved. In complex structures such as hospital buildings or airports is quite complex for architects to determine optimal design solutions based on the tools available nowadays. These due to the fact users are not contemplated in the model. Part of the data used for the simulation can be derived from the BIM model. The three-dimensional model provides parametric information, however are not semantically enriched. They provide parameters to elements but not the connection between them, not the relationship. It means that during a simulation Virtual Users can recognize the elements represented in BIM models, but not what they mean, due to the lack of semantics. At the same time the built environment may assume different functions depending on the physical configuration or activities that are performed on it. The status of the space may reveal differences and these changes occur constantly and are dynamic. In an initial state, a room can be noisy and a moment later, quiet. This can determine what type of activities the space can support according to each change in status. In this study we demonstrate how the spaces can express different semantic information according to the activity performed on it. The aim of this paper is to simulate the activities carried out in the building and how they can generate different semantics to spaces according to the use given to it. Then we analyze the conditions to the implementation of this knowledge in the BIM model.
keywords	BIM, Virtual Sensitive Environments, Building Use Simulation, Semantics.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	ecaade2015_170
id	ecaade2015_170
authors	Cavusoglu, Ömer Halil
year	2015
title	The Position of BIM Tools in Conceptual Design Phase: Parametric Design and Energy Modeling Capabilities
doi	https://doi.org/10.52842/conf.ecaade.2015.1.607
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 607-612
summary	Numerous researchers point out that, in the early stages of architectural design, many significant decisions are taken to directly affect functional qualities, the performance of the building, aesthetics, and the relationship of the building with the natural environment and climate, even if there is no certain and valid information to create and obtain adequate design.In this paper, I particularly focus on the early stages of architectural design and search for the opportunities provided by Building Information Modeling (BIM) tools, towards the concept of performance analysis and parametric form seeking. Study also includes case study implementations which visualize the early processes of architectural design with benefits of BIM under different conditions to evaluate its opportunities during these design processes.
wos	WOS:000372317300065
series	eCAADe
email
last changed	2022/06/07 07:55

For more results click below: