Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 591

Reformat results as: short short into frame detailed detailed into frame

_id	acadia15_357
id	acadia15_357
authors	Ashour, Yassin; Kolarevic, Branko
year	2015
title	Heuristic Optimization in Design
doi	https://doi.org/10.52842/conf.acadia.2015.357
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 357-369
summary	This paper presents a workflow called the ‘heuristic optimization workflow’ that integrates Octopus, a Multi-Objective Optimization (MOO) engine with Grasshopper3D, a parametric modeling tool, and multiple simulation software. It describes a process that enables the designer to integrate disparate domains via Octopus and complete a feedback loop with the developed interactive, real-time visualization tools. A retrospective design of the Bow Tower in Calgary is used as a test case to study the impact of the developed workflow and tools, as well as the impact of MOO on the performance of the solutions. The overall workflow makes MOO based results more accessible to designers and encourages a more interactive ‘heuristic’ exploration of various geometric and topological trajectories. The workflow also reduces design decision uncertainty and design cycle latency through the incorporation of a feedback loop between geometric models and their associated quantitative data. It is through the juxtaposition of extreme performing solutions that serendipity is created and the potential for better multiple performing solutions is increased.es responsive systems, which focus on the implementation of multi-objective adaptive design prototypes from sensored environments. The intention of the work is to investigate multi-objective criteria both as a material system and as a processing system by creating prototypes with structural integrity, where the thermal energy flow through the prototype, to be understood as a membrane, can be controlled and the visual transparency altered. The work shows performance based feedback systems and physical prototype models driven by information streaming, screening, and application.
keywords	Multi-Objective Optimization, Generative Design, Performance-Based Design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2015_8.328
id	sigradi2015_8.328
authors	Mueller, Volker
year	2015
title	Learning about Parametric Model Behavior through Multi-Objective Optimization
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 405-413.
summary	This paper reports about a design process as a case study illustrating different levels of learning that seem required for successful computational design. The learning process occurred during a two-day workshop about parametric design with integrated analysis and multi-objective optimization. First, the design team needs to understand the behavior of the model in order to validate that the model behaves in a way that actually conforms with the project goals; second, the design team needs to learn about potential trade- offs between different project goals, and thus understand the decisions that need to be made, or the additional problems that need to be solved in order to arrive at a better design solution.
keywords	Simulation and Modeling, Generative Systems, Parametric Design Multi-objective Optimization, Computational Design Learning
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ecaade2015_307
id	ecaade2015_307
authors	Kallegias, Alexandros and Erdine, Elif
year	2015
title	Design by Nature: Concrete Infiltrations
doi	https://doi.org/10.52842/conf.ecaade.2015.2.513
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 513-520
wos	WOS:000372316000058
summary	The paper aims to address methods of realizing computationally generated self-organizing systems on a one-to-one scale with the employment of a singular material system. The case study described in this paper is the outcome of an investigation which has explored earth scaffolding, fabric form-work, and concrete materiality during an international three-week architecture workshop. Real-time generative form-finding methods based on branching and bundling systems in nature have been developed and simulated in an open-source programming environment. The outcome of the simulation stage has been analyzed structurally via Finite Element Analysis (FEA), results of which have served as inputs for the fine-tuning of the simulation. Final three-dimensional geometry has been fabricated by employing fabric, essentially forming the fabric form-work. Fabric form-work is then laid on top of the earth scaffolding, followed by the process of concrete casting. From a pedagogical point of view, the research focuses on the integration of digital design techniques between various design/architecture/analysis platforms combined with basic and advanced techniques of construction within a limited time frame.abstract here by clicking this paragraph.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2015_10.177
id	sigradi2015_10.177
authors	Angelo, Alex Garcia Smith; Manna, Ilaria La; Hernandez, Oscar; Valdiviezo, Marlon; Lastras, Alejandra Díaz de León; Salazar, Oscar Ivan Campo; Montezuma, Vanessa; Zubieta, Marco
year	2015
title	Fab Lab and Multiculturalism in Latin America: The Fab Lat Kids case and the project “Emosilla”
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 551-557.
summary	This paper expresses a lecture of the experience of an investigation carried by a group of Latin American Fab Labs dedicated to the promotion of the use of modeling, digital fabrication, and network communication as tools of educational and social development of children in latin culture. This study is based on online workshop typologies with a methodological perspective that included local technological adaptations, data gathering, and exchange of knowledge on the fab lab network.
keywords	Design, Digital Manufacturing, Society, Technology Learning, Collaborative Network
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia15_195
id	acadia15_195
authors	Belesky, Philip; Monacella, Rosalea; Burry, Mark; Burry, Jane
year	2015
title	A Field in Flux: Exploring the Application of Computational Design Techniques to Landscape Architectural Design Problems
doi	https://doi.org/10.52842/conf.acadia.2015.195
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 195-202
summary	Landscape architectural design problems are under-served by the current canon of computational design techniques. More investigations into modeling landscape phenomena would improve the capabilities of designers working in this field. This paper introduces some of the problems specific to the intersection of computational design and landscape architecture through a case study in generating planting plans using parametric techniques. This illustrates issues of temporality, complexity, and dynamism that distinguish land form from built form alongside the opportunities and challenges found in adapting computation to the design of natural systems.
keywords	Landscape modeling, ecological modeling, landscape architecture, systems design, environmental simulation
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2015_81
id	ecaade2015_81
authors	Hudson, Roland; Schaefer, Gavin, Kroeker, Richard, Forest, Neil and Burnay, Diogo
year	2015
title	Subdivision Surface Modeling to Foster Responsive Design Solutions in an Integrated Multi-disciplinary Team
doi	https://doi.org/10.52842/conf.ecaade.2015.1.403
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 403-413
wos	WOS:000372317300044
summary	This paper documents an architectural project developed using subdivision surface modelling. Subdivision surfaces are not new, and the tools are readily available in many 3d modelling applications. Despite their age and availability and recognised benefits they are rarely applied in architectural projects furthermore there is paucity of published case studies that demonstrate these tools in action. The second contribution to the field that this paper offers is in recognising the way in which subdivision surfaces can provide a new form of collaboration. Our core team consisted of architect, artist and 3d modeller and the project was inspired by a ceramic sculpture with unusual geometry. Subdivision surface modelling enabled a unique form of design exploration, feedback and communication between people with diverse skills. This case study therefore offers both insight into applied use of subdivision modelling and further depth into the way it enables interdisciplinary collaboration.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=d57fa2ac-7022-11e5-b34f-83875df41ff7
last changed	2022/06/07 07:50

_id	caadria2015_188
id	caadria2015_188
authors	Krakhofer, Stefan and Martin Kaftan
year	2015
title	Augmented Reality Design Decision Support Engine for the Early Building Design Stage
doi	https://doi.org/10.52842/conf.caadria.2015.231
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 231-240
summary	Augmented reality has come a long way and experienced a paradigm shift in 1999 when the ARToolKit was released as open source. The nature of interaction between the physical world and the virtual-world has changed forever. Fortunately for the AECO industry, the transition from traditional Computer Aided Design to virtual building design phrased as Building Information Modeling has created a tremendous potential to adopt Augmented Reality. The presented research is situated in the early design stage of project inception and focuses on supporting informed collective decision-making, characterized by a dynamic back and forth analytical process generating large amounts of data. Facilitation aspects, such as data-collection, storage and access to enable comparability and evaluation are crucial for collective decision-making. The current research has addressed these aspects by means of data accessibility, visualization and presentation. At the core of the project is a custom developed Augmented Reality framework that enables data interaction within the design model. In order to serve as a collaborative decision support engine, the framework also allows multiple models and their datasets to be displayed and exercised simultaneously. The paper demonstrates in the case study the successful application of the AR tool during collaborative design decision meetings.
keywords	Augmented Reality; Design Decision Support; Data Visualization.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	acadia15_431
id	acadia15_431
authors	Winn; Kelly
year	2015
title	Transient Thermal Exchange and Developmental Form for Tactile Surfaces
doi	https://doi.org/10.52842/conf.acadia.2015.431
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 431-441
summary	The idea of an emergent or generative form based on repeating rules of development borrowed from the field of developmental biology has provided fertile ground for inspiration for architectural theory and computational design. With simple constraints developed iteratively, complex geometry and form generation can be distilled down to a list of developmental rules or functions in order to deterministically generate form. The ideas and illustrations of naturalists on organic form and developmental biology leading back to the turn of the 20th c., such as the work of D'arcy Wentworth Thompson and Ernst Haeckel, have inspired architects from Louis Sullivan all the way to contemporary generative design. This study revisits this design tradition of biomimetic geometries based on deterministic rules for the iterative development of forms based on biological analogs and models for growth. A series of semi-regular compound patterns were developed using parametric modeling and iterative rules. These geometries were then applied to surface topologies as a decorative tactile embellishment resulting in complex thermodynamic conditions. A series of physical prototypes where then developed with different high-relief patterns and pattern densities. Positive prototype geometries were then produced using stereolithography for casting plaster molds for the production molding of finished ceramic pieces for thermal analysis using digital thermography. By studying the performance of these complex geometries as physical prototypes under controlled experimentation, high-relief surfaces and the resulting thermodynamic conditions can be understood not just qualitative experience, but also quantitatively through measured performance metrics and innovative tools for analytical analysis.
keywords	Tactile surfaces, developmental biology, biomimicry, l-systems, ceramic materials, heat transfer, thermography, ergonomics
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:57

_id	caadria2015_124
id	caadria2015_124
authors	Çavu_o_lu, Ömer H.
year	2015
title	Building Information Modeling Tools: Opportunities for Early Stages of Architectural Design
doi	https://doi.org/10.52842/conf.caadria.2015.427
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 427-436
summary	Numerous researchers point out that in the early stages of architectural design many significant decisions are taken to directly affect functional qualities, performance of the building, aesthetics, and relationships of the building with the natural environment and climate, even if there is no certain and valid information to create satisfactory design solutions. This paper particularly focuses on the early stages of architectural design and searches for the opportunities provided by Building Information Modeling (BIM) tools, in terms of the concept of performance analysis and form seeking. The study also includes case study implementations which visualize the early processes of architectural design with benefits of BIM under different conditions to evaluate its opportunities during these design processes. A few case studies have been implemented to reveal how new BIM tools can help designers in these stages. As a result of the implementations, it has been understood that BIM is a powerful early stages of architectural design tool; not for designing, but for supporting design.
keywords	Building Information Modeling; computational design analysis; performance evaluation in the early design stages.
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	caadria2015_139
id	caadria2015_139
authors	Herr, Christiane M. and Ryan C. Ford
year	2015
title	Adapting Cellular Automata as Architectural Design Tools
doi	https://doi.org/10.52842/conf.caadria.2015.169
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 169-178
summary	In this paper we examine the adaptations cellular automata (CA) are typically subjected to when they are applied to architectural designing. We argue that, despite a number of earlier studies that portrayed CA as generic generative design tools, the transition from generic CA to specific design tools is not yet well understood. To describe this transition, we first examine this aspect in a number of previous studies relating CA to architectural design. In a following detailed analysis of an applied design case study, we trace similarities between findings made in the literature review to findings made in the case study and extend them with additional observations. We conclude with a summary of challenges and opportunities met by architectural designers employing and developing CA for design purposes.
keywords	Cellular automata; generative design; design research; design tools.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	acadia15_407
id	acadia15_407
authors	Kim, Dongil; Lee, Seojoo
year	2015
title	A Systemized Aggregation with Generative Growth Mechanism in Solar Environment
doi	https://doi.org/10.52842/conf.acadia.2015.407
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 407-415
summary	The paper demonstrates a work-in-progress research on an agent-based aggregation model for architectural applications with a system of assembly based on environmental data acted as a driver for a growth mechanism. Even though the generative design and algorithms have been widely employed in the field of art and architecture, such applications tend to stay in morphological explorations. This paper examines an aggregation model based on Diffusion Limited Aggregation system incorporating solar environment analysis for global perspective of aggregation, the geometry research for lattice systems, and morphological principles of unit module in agent scale. The later part of this research paper demonstrates the potential of a design process through the “Constructed Cloud” case study, including site-specific applications and the implementation of the systematized rule set.
keywords	Aggregation, Generative Algorithm, Diffusion Limited Aggregation, Responsive Growth Mechanism, Solar Environment, Responsive System / Algorithm, Adaptable Architecture, Data Analysis, Systemized Architecture, Truncated Octahedron, Sun Oriented Aggregation
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	sigradi2015_11.165
id	sigradi2015_11.165
authors	Ligler, Heather; Economou, Thanos
year	2015
title	Lost in Translation: Towards an Automated Description of John Portman’s Domestic Architecture
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 657-661.
summary	The prevalent mode of shape grammar output is a two-dimensional drawing grammar. For architectural applications, these two- dimensional shape rules can hold a variety of interpretations in three-dimensional space. This work translates an existing grammar from a manual two-dimensional drawing grammar to an automated three-dimensional building grammar to explore the challenges and opportunities that this translation suggests in the larger context of shape computation. The case study considered here is a grammar interpreting John Portman’s architectural language as defined by the house Portman identifies as emblematic of his design principles, his 1964 personal residence Entelechy I.
keywords	Shape Grammars, Shape Grammar Implementations, Formal Composition, Generative Systems
series	SIGRADI
email
last changed	2016/03/10 09:54

_id	acadia15_297
id	acadia15_297
authors	Vasey, Lauren; Baharlou, Ehsan; Dörstelmann, Moritz; Koslowski; Marshall Prado, Valentin; Schieber, Gundula; Menges, Achim; Knippers, Jan
year	2015
title	Behavioral Design and Adaptive Robotic Fabrication of a Fiber Composite Compression Shell with Pneumatic Formwork
doi	https://doi.org/10.52842/conf.acadia.2015.297
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 297-309
summary	This paper presents the production and development of an adaptive robotically fabricated ber composite compression shell with pneumatic formwork as a case study for investigating a generative behavioral design model and an adaptive, online mode of production. The project builds off of previous research at the University of Stuttgart on lightweight ber composite structures which attempts to reduce the necessary formwork for fabrication while simultaneously incorporating structural, material and fabrication logics into an integrative computational design tool. This paper discusses the design development and fabrication work ow of the project, as well a set of strategies which were developed for online robotic programming in response to live sensor data.
keywords	Behavioral Fabrication, Behavioral Robotics, Agent Based Computation, Online Control, Biomimetics, Pneumatics, Signal Processing, Fibre Based Composites
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	cf2015_279
id	cf2015_279
authors	Abdelmohsen, Sherif M. and Massoud, Passaint M.
year	2015
title	Making Sense of those Batteries and Wires: Parametric Design between Emergence and Autonomy
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 279-296.
summary	This paper reports on the process and outcomes of a digital design studio that integrates parametric design and generative systems in architectural and urban design projects. It explores the interrelationship between the emergence of innovative formal representations using parametric design systems on the one hand, and design autonomy; more specifically the conscious process of generating and developing an architectural concept, on the other. Groups of undergraduate students working on an architectural project are asked to identify a specific conceptual parti that addresses an aspect of architectural quality, define strategies that satisfy those aspects, and computational methodologies to implement those strategies, such as rule-based systems, self-organization systems, and genetic algorithms. The paper describes the educational approach and studio outcomes, discusses implications for CAAD education and curricula, and addresses issues to be considered for parametric and generative software development.
keywords	Parametric modeling, generative design, emergence, autonomy, design exploration, CAAD curriculum.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	cf2015_485
id	cf2015_485
authors	Anaf, Márcia and Harris, Ana Lúcia Nogueira de Camargo
year	2015
title	The geometry of Chuck Hoberman as the basis for the development of dynamic experimental structures
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 485.
summary	The cognitive-theoretical foundation referring to teach drawing as a way of thinking, as well as the construction of the environment by means of drawing using transforming geometries and the formal and para-formal computational process, creating unusual geometries through generative design processes and methodologies, can be seen as some of the main possibilities in exploring dynamic experimental structures for an Adaptive Architecture. This article presents the development of a model for articulated facades, inspired by Hoberman´s Tessellates, and his Adaptive Building Initiative (ABI) project to develop facades models that respond in real time to environmental changes. In addition, we describe an experiment based on the retractable structures, inspired by Hoberman´s work and experimentations. Solutions for responsive facades can offer more flexible architectural solutions providing better use of natural light and contributing to saving energy. Using Rhinoceros and the Grasshopper for modeling and test the responsiveness, the parametric model was created to simulate geometric panels of hexagonal grids that would open and close in reaction to translational motion effects, regulating the amount of light that reaches the building.
keywords	Parametric architecture, Hoberman´s Tessellates, Adaptive Building Initiative (ABI), Articulated Facades, Complex Geometries, Retractable structures, Retractable polyhedra.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	cf2015_268
id	cf2015_268
authors	Benedetto, Henrique; Kipper, Fabrício A.;Marques, Vinícius and Bruscato, Underléa M.
year	2015
title	Development of Parklets by using parametric modeling
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 268-278.
summary	The lack of urban planning has made the recreation areas increasingly smaller in the cities. Parks and squares gradually gave way to streets and avenues to try to accommodate the growing number of cars and motorcycles. An alternative that tries to balance recreation areas and urban roads was found in the city of San Francisco (USA). Parklets are temporary extensions of urban sidewalks that occupy a few parking spaces. This article aims to demonstrate the potential of parametric modeling in the development of parklets. Thus, anthropometric studies, amount of parking spaces and types of benches were used as input parameters. Rhinoceros and grasshopper programs were used for modeling, while 3D Studio Max was used for rendering. With this study it was possible to verify that when the project is parameterized the processes of creation and modification became faster, reducing design and implementation time.
keywords	Grasshopper algorithm editor, Parametric model, Parklets.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	ecaade2015_170
id	ecaade2015_170
authors	Cavusoglu, Ömer Halil
year	2015
title	The Position of BIM Tools in Conceptual Design Phase: Parametric Design and Energy Modeling Capabilities
doi	https://doi.org/10.52842/conf.ecaade.2015.1.607
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 607-612
wos	WOS:000372317300065
summary	Numerous researchers point out that, in the early stages of architectural design, many significant decisions are taken to directly affect functional qualities, the performance of the building, aesthetics, and the relationship of the building with the natural environment and climate, even if there is no certain and valid information to create and obtain adequate design.In this paper, I particularly focus on the early stages of architectural design and search for the opportunities provided by Building Information Modeling (BIM) tools, towards the concept of performance analysis and parametric form seeking. Study also includes case study implementations which visualize the early processes of architectural design with benefits of BIM under different conditions to evaluate its opportunities during these design processes.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	cf2015_005
id	cf2015_005
authors	Celani, Gabriela; Sperling, David M. and Franco, Juarez M. S. (eds.)
year	2015
title	Preface
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 5-13.
summary	Since 1985 the Computer-Aided Architectural Design Futures Foundation has fostered high level discussions about the search for excellence in the built environment through the use of new technologies with an exploratory and critical perspective. In 2015, the 16th CAAD Futures Conference was held, for the first time, in South America, in the lively megalopolis of Sao Paulo, Brazil. In order to establish a connection to local issues, the theme of the conference was "The next city". The city of Sao Paulo was torn down and almost completely rebuilt twice, from the mid 1800s to the mid 1900s, evolving from a city built in rammed-earth to a city built in bricks and then from a city built in bricks to a city built in concrete. In the 21st century, with the widespread use of digital technologies both in the design and production of buildings, cities are changing even faster, in terms of layout, materials, shapes, textures, production methods and, above all, in terms of the information that is now embedded in built systems.Among the 200 abstracts received in the first phase, 64 were selected for presentation in the conference and publication in the Electronic Proceedings, either as long or short papers, after 3 tough evaluation stages. Each paper was reviewed by at least three different experts from an international committee of more than 80 highly experienced researchers. The authors come from 23 different countries. Among all papers, 10 come from Latin-American institutions, which have been usually under-represented in CAAD Futures. The 33 highest rated long papers are also being published in a printed book by Springer. For this reason, only their abstracts were included in this Electronic Proceedings, at the end of each chapter.The papers in this book have been organized under the following topics: (1) modeling, analyzing and simulating the city, (2) sustainability and performance of the built environment, (3) automated and parametric design, (4) building information modeling (BIM), (5) fabrication and materiality, and (6) shape studies. The first topic includes papers describing different uses of computation applied to the study of the urban environment. The second one represents one of the most important current issues in the study and design of the built environment. The third topic, automated and parametric design, is an established field of research that is finally becoming more available to practitioners. Fabrication has been a hot topic in CAAD conferences, and is becoming ever more popular. This new way of making design and buildings will soon start affecting the way cities look like. Finally, shape studies are an established and respected field in design computing that is traditionally discussed in CAAD conferences.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	caadria2015_220
id	caadria2015_220
authors	Cheng, Nancy Y.; Mehrnoush Latifi Khorasgani, Nicholas Williams, Daniel Prohasky and Jane Burry
year	2015
title	Understanding Light in Building Skin Design
doi	https://doi.org/10.52842/conf.caadria.2015.323
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 323-332
summary	This paper describes a design approach for discerning solar gain and assigning appropriate external shading devices. The approach includes a macro analysis locating where and when the building receives direct sunlight and locating desired interior daylighting; along with a micro analysis of how folded sun-shading motifs filter or block direct sunlight. The approach uses a collaborative analytical workflow with feedback from virtual and physical simulations informing design explorations. This iterative, reciprocating process is illustrated by student efforts to design shading structures for a building based on incident solar radiation. Designers begin with cutting and folding paper study models, then lasercut 2D tessellation patterns to create sculptural shading screens to be examined with a heliodon. Physical daylighting modeling reveals aesthetic opportunities to develop with parametric design. Motifs are then digitally modeled and analysed for shading effectiveness. Analysing the solar radiation of simple motifs helps beginners learn the software for subsequent urban situations. The efficacy of these simulations is discussed along with ways that the results could be interpreted to initiate design decisions for a building skin.
keywords	Solar simulation; collaborative design; folding surfaces; physical and digital simulation.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2015_118
id	ecaade2015_118
authors	Ferreira, Bruno and Leitão, António
year	2015
title	Generative Design for Building Information Modeling
doi	https://doi.org/10.52842/conf.ecaade.2015.1.635
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 635-644
wos	WOS:000372317300069
summary	Generative Design (GD) is a programming-based approach for Architecture that is becoming increasingly popular amongst architects. However, most Generative Design approaches were thought for traditional Computer Aided Design (CAD) tools and are not adequate for the Building Information Modeling (BIM) paradigm. This paper proposes a solution that extends GD to be used with BIM applications while preserving and taking advantage of its ideas. The solution will be evaluated by developing a connection between Revit, a well-known BIM tool, and Rosetta, a programming environment for GD, and by implementing the necessary programming language features that allows GD to be used in the context of BIM tool.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=cba54e6e-7025-11e5-81ea-00190f04dc4c
last changed	2022/06/07 07:50

For more results click below: