Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 591

Reformat results as: short short into frame detailed detailed into frame

_id	cf2015_247
id	cf2015_247
authors	Demir, Gozdenur
year	2015
title	Analysis of Space Layout Using Attraction Force Model and Quadratic Assignment Problem
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 247-267.
summary	This paper researches the usefulness of computerized space layout programs in an actual problem of space layout of more than 50 design units of unequal sizes. This was tested with two existing space layout optimization methods, Quadratic Assignment Problem (QAP) and Attraction Force Model (AFM) as well as a satisficing method, intuitive approach. Necessary inputs for the evaluation processes, the evaluation processes and the resulting space layouts were analyzed for each approach by one designer. Their performance in the design process was criticized on subjects like preparation of inputs, situations related with multiple trials, evaluation of the resulting space layouts based on given inputs and what those space layouts represented. Generating alternatives is an advantage of computerized space layout approaches so that conditioning on the resulting space layouts decreases in the process but more research has to be done for their practicality in terms of input preparation, evaluation and transfer of outputs. Possible improvements were suggested to increase their usefulness in the professional field.
keywords	computerized space layout approaches, quadratic assignment problem, equilibrium method, intuitive approach
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	sigradi2015_13.316
id	sigradi2015_13.316
authors	Ariza, Inés; Gazit, Merav
year	2015
title	On-site Robotic Assembly of Double-curved Self-supporting Structures
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 746-753.
summary	Robotic assembly of architectural structures has been an area of research for a few decades. Yet, current methods impose a large number of constraints on the geometry of those structures. In this paper we introduce a method for robotic assembly that enables the construction of double curved self-supporting structures. Latest research challenges have focused on the assembly of sophisticated brick structures and on sensor feedback systems for handling accuracy. We propose an alternative strategy to tackle tolerance handling in complex structures that rely on geometry. The intelligence of the system lies in two main aspects: a subdivision technique that incorporates the robot’s constraints as well as the structural equilibrium of the structure during each step of assembly, in order to omit the use of scaffolding; and a match between geometric information and the robot’s movements in a robot programming environment. As a proof of concept, we fabricated a portion of a full-scale double-curved structure. The structure was assembled without scaffolding by a portable KUKA KR10 on a randomly picked site. This project aims to demonstrate an easy and simple method for robotic assembly that enables the realization of digitally generated complex geometries as concrete complex structures.
keywords	Robotic Assembly, Self-supporting Structure, On-site Assembly, Double Curvature, Construction Tolerances
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia15_123
id	acadia15_123
authors	Askarinejad, Ali; Chaaraoui, Rizkallah
year	2015
title	Spatial Nets: the Computational and Material Study of Reticular Geometries
doi	https://doi.org/10.52842/conf.acadia.2015.123
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 123-135
summary	Reticular systems are in many aspects a distinct taxonomy of volumetric geometries. In comparison with the conventional embodiment of a ‘volume’ that encapsulates a certain quantity of space with a shell reticular geometries emerge from the accumulation of micro elements to define a gradient of space. Observed in biological systems, such structures result from their material properties and formation processes as well as often ‘simple’ axioms that produce complex results. In micro or macro levels, from forest tree canopies to plant cell walls these porous volumes are not shaped to have a singular ‘solution’ for a purpose; they provide the fundamental geometric characteristics of a ‘line cloud’ that is simultaneously flexible in response to its environment, porous to other systems (light, air, liquids) and less susceptible to critical damage. The porosity of such systems and their volumetric depth also result in kinetic spatial qualities in a 4D architectural space. Built upon a ‘weaving’ organization and the high performance material properties of carbon fiber composite, this research focuses on a formal grammar that initiates the complex system of a reticular volume. A finite ‘lexical’ axiom is consisted of the basic characters of H, M and L responding to the anchor points on the highest, medium and lower levels of the extruding loom. The genome thus produces a string of data that in the second phase of programming are assigned to 624 points on the loom. The code aims to distribute the nodes across the flat line cloud and organize the sequence for the purpose of overlapping the tensioned strings. The virtually infinite results are then assessed through an evolutionary solver for confining an array of favorable results that can be then selected from by the designer. This research focuses on an approximate control over the fundamental geometric characteristics of a reticular system such as node density and directionality. The proposal frames the favorable result of the weave to be three-dimensional and volumetric – avoiding distinctly linear or surface formations.
keywords	Reticular Geometries, Weaving, Line Clouds, Three-dimensional Form-finding, Carbon fiber, Prepreg composite, Volumetric loom, Fiberous Materials, Weaving fabrication, Formal Language, Lexical design, Evolutionary solver
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2015_247
id	ecaade2015_247
authors	Garcia, Manuel Jimenez and Retsin, Gilles
year	2015
title	Design Methods for Large Scale Printing
doi	https://doi.org/10.52842/conf.ecaade.2015.2.331
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 331-339
wos	WOS:000372316000039
summary	With an exponential increase in the possibilities of computation and computer-controlled fabrication, high density information is becoming a reality in digital design and architecture. However, construction methods and industrial fabrication processes have not yet been reshaped to accommodate the recent changes in those disciplines. Although it is possible to build up complex simulations with millions of particles, the simulation is often disconnected from the actual fabrication process. Our research proposes a bridge between both stages, where one drives the other, producing a smooth transition from design to production. A particle in the digital domain becomes a drop of material in the construction method.The architect's medium of expression has become much more than a representational tool in the last century, and more recently it has evolved even beyond a series of rules to drive from design to production. The design system is the instruction itself; embedding structure, material and tectonics and gets delivered to the very end of the construction chain, where it gets materialised. The research showcased in this paper investigates tectonic systems associated with large scale 3D printing and additive manufacturing methods, inheriting both material properties and fabrication constraints at all stages from design to production. Computational models and custom design software packages are designed and developed as strategies to organise material in space in response to specific structural and logistical input.Although the research has developed a wide spectrum of 3D printing methods, this paper focuses only on two of the most recent projects, where different material and computational logics were investigated. The first, titled Filamentrics, intends to develop free-form space frames, overcoming their homogeneity by introducing robotic plastic extrusion. Through the use of custom made extruders a vast range of high resolution prototypes were developed, evolving the design process towards the fabrication of precise structures that can be materialised using additive manufacturing but without the use of a layered 3D printing method. Instead, material limitations were studied and embedded in custom algorithms that allow depositing material in the air for internal connectivity. The final result is a 3x2x2.5m structure that demonstrates the viability of this construction method for being implemented in more industrial scenarios.While Filamentrics is reshaping the way we could design and build light weight structures, the second project Microstrata aims to establish new construction methods for compression based materials. A layering 3D printing method combines both the deposition of the binder and the distribution of an interconnected network of capillaries. These capillaries are organised following structural principles, configuring a series of channels which are left empty within the mass. In a second stage aluminium is cast in this hollow space to build a continuous tension reinforcement.
series	eCAADe
type	normal paper
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=07a6d8e0-6fe7-11e5-9994-cb14cd908012
last changed	2022/06/07 07:51

_id	cf2015_324
id	cf2015_324
authors	Gerber, David Jason; Pantazis, Evangelos and Marcolino, Leandro Soriano
year	2015
title	Design Agency: Prototyping Multi-Agent Systems in Architecture
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 324.
summary	This paper presents research on the prototyping of multi-agent systems for architectural design. It proposes a design exploration methodology at the intersection of architecture, engineering, and computer science. The motivation of the work includes exploring bottom up generative methods coupled with optimizing performance criteria including for geometric complexity and objective functions for environmental, structural and fabrication parameters. The paper presents the development of a research framework and initial experiments to provide design solutions, which simultaneously satisfy complexly coupled and often contradicting objectives. The prototypical experiments and initial algorithms are described through a set of different design cases and agents within this framework; for the generation of façade panels for light control; for emergent design of shell structures; for actual construction of reciprocal frames; and for robotic fabrication. Initial results include multi-agent derived efficiencies for environmental and fabrication criteria and discussion of future steps for inclusion of human and structural factors.
keywords	Generative Design, Parametric Design, Multi-Agent Systems, Digital Fabrication, Form Finding, Reciprocal Frames.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	acadia15_137
id	acadia15_137
authors	Ireland, Tim
year	2015
title	A Cell-Inspired Model of Configuration
doi	https://doi.org/10.52842/conf.acadia.2015.137
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 137-148
summary	This paper presents a bottom-up approach to organising architectural-space, which offers a fresh outlook on the automatic generation of architectural layouts. Artificial creatures, modelled on Eukaryotic cells, are used as components with which to generate configurations articulating patterns of habitation. These components represent discrete activities. Activity is perceived to be the basic building block of spatial configuration in architecture. Attributes, pertaining to input and outputs, establish activities as occurring in chains of action; affected by that which has preceded and affecting that which is to transpire. Being artificial creatures these activity-components have the capacity to interact with their environment and each other, and self-organise to form aggregations. The model demonstrates an ecological approach to designing in a manner that unites computational design with biological and semiotic theory. The theoretical basis of the model is first outlined, and then the computer model is presented and described.
keywords	Agents, Artificial Life, Configuration, Spatial Organisation, Behaviour of Organisms, Activity Diagrams
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	ijac201513103
id	ijac201513103
authors	Kobayashi, Yuki; Naoki Katoh, Tomohiro Okano, Atsushi Takizawa
year	2015
title	An Inductive Construction of Rigid Panel-Hinge Graphs and Their Applications to Form Design
source	International Journal of Architectural Computing vol. 13 - no. 1, 45–64
summary	A panel-hinge framework is a structure composed of rigid panels connected by hinges. It was recently proved that at a generic position, the rigidity of panel-hinge frameworks can be predicted by examining a certain combinatorial property of the underlying graph. In this study, we apply such combinatorial characteristics to create design forms. When considering the application of design forms, we must also take into account non-generic cases. In this paper we develop two new approaches; the first one that the method inductively generates non-generic rigid panel-hinge frameworks consisting of orthogonal panels and the second one that inductively generates non-generic rigid panel-hinge frameworks based on fractal geometry coupled with space-filling convex polyhedron as a construction unit. We will give examples of forms created by the proposed method in order to demonstrate the applicability of the proposed methods to design forms.
series	journal
last changed	2019/05/24 09:55

_id	caadria2015_065
id	caadria2015_065
authors	Matsubayashi, Michio; and Shun Watanabe
year	2015
title	Generating Schematic Diagrams of MEP Systems from 3D Building Information Models for Use in Conservation
doi	https://doi.org/10.52842/conf.caadria.2015.293
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 293-302
summary	In this paper, we propose a method of generating schematic diagrams from 3D models of mechanical, electrical and plumbing (MEP) systems in order to represent this information in a more traditional, user-friendly format. It can be difficult to grasp the relationships between various MEP elements in building information models (BIM) because they are represented in a visually complex, three-dimensional manner. On the other hand, the relationships between building elements can be easily understood when using traditional schematic diagrams. First, sets of connected elements are extracted from a 3D model of MEP elements using their connection properties. Next, various elements of these systems are identified as nodes and their connections are represented as edges. Finally, these systems are displayed as a schematic diagram using element attribute information.
keywords	BIM; Schematic Diagram; Attribute Information; Graph; Existing Buildings.
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ecaade2015_297
id	ecaade2015_297
authors	Park, James and Economou, Athanassios
year	2015
title	The Dirksen Variations - Towards a Generative Description of Mies's Courthouse Language
doi	https://doi.org/10.52842/conf.ecaade.2015.1.453
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 453-462
wos	WOS:000372317300049
summary	A generative description of Mies van der Rohe's courthouse language is presented in the form of a shape grammar. The grounding of the work is based on a set of 135 sketches produced by the office of Mies during the design process of the Everett McKinley Dirksen United States Courthouse in Chicago, and documented in the Mies van der Rohe Archive at the Museum of Modern Art. The work here postulates a set of 39 unique courthouse designs all showcasing distinct variations of the courtroom type in the Miesian language and re-casts them in two-dimensional diagrams to make their differences and similarities transparent. A series of spatial relations between five types of spaces are extracted, including courtrooms, circulation networks, vertical cores, office spaces, and support spaces, and are deployed to specify the shape rules of the grammar. A set of conventions to specify how the two-dimensional diagrams represent three-dimensional models is briefly outlined to prepare the ground for the implementation of the grammar in a three-dimensional shape grammar interpreter.
series	eCAADe
email
last changed	2022/06/07 08:00

_id	acadia15_417
id	acadia15_417
authors	van der Heijden, Ramon; Levelle, Evan; Riese, Martin
year	2015
title	Parametric Building Information Generation for Design and Construction
doi	https://doi.org/10.52842/conf.acadia.2015.417
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 417-429
summary	Thermal Form, is architecture that does work. Or, it is the application of energy as information to architectural geometry, with the express purpose of using the resistance of structure against an opposing thermodynamic force, in order to manipulate and direct flows that exist in both the interior and along the exterior of a building. By examining the relationship between surface configuration, surface area and type of energy transfer occurring - with a focus on the mechanism of transfer - thermal form strategies can be used to further optimize existing building typologies and environmental control system strategies, or, perform a more radical detouring of the atmosphere of a building.
keywords	Parametric, modeling, building ,information, generation, construction, fabrication
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	acadia15_381
id	acadia15_381
authors	Jabi, Wassim
year	2015
title	The Potential of Non-Manifold Topology in the Early Design Stages
doi	https://doi.org/10.52842/conf.acadia.2015.381
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 381-493
summary	The importance of decisions made during the early design stages has prompted researchers to advocate the use of building performance simulation (BPS) during that stage. This paper investigates non-manifold topology (NTM) as a novel approach to 3D modelling that has the potential to be highly compatible with the early design stages and with the input requirements for BPS. The proposed approach avoids the process of simplifying polyhedral models produced by Building Information Modelling (BIM) software to conduct BPS. In particular, NTM allows for a clear segmentation of a building, unambiguous space boundaries, and perfectly matched surfaces and glazing subsurfaces. The NTM approach was tested through a software prototype that integrates 3D modelling software and an energy simulation engine.
keywords	Early design stage, Non-manifold topology, Building performance simulation
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:50

_id	ecaade2015_324
id	ecaade2015_324
authors	Abdelmohsen, Sherif and Massoud, Passaint
year	2015
title	Integrating Responsive and Kinetic Systems in the Design Studio: A Pedagogical Framework
doi	https://doi.org/10.52842/conf.ecaade.2015.2.071
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 71-80
wos	WOS:000372316000010
summary	Responsive architecture is one of the growing areas of computational design that is not getting adequate attention in CAAD curricula. A pedagogical approach to designing responsive systems requires more than the typical knowledge, tools or skill sets in architectural design studios. This paper presents a framework for integrating responsive and kinetic systems in the architectural design studio. The framework builds on findings of two design studios conducted at The American University in Cairo, Egypt. In both studios, students were asked to design elements of responsive architecture that work towards the development of their projects. The paper demonstrates the process and outcomes of both studios. It then demonstrates how concepts of integrated project delivery are incorporated to propose a framework that engages students in designing, fabricating and operating responsive systems in different phases of the design process. A discussion follows regarding dynamics of design studio in light of the proposed framework.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=7e59e026-6e8f-11e5-9e59-876225eebea0
last changed	2022/06/07 07:54

_id	cf2015_279
id	cf2015_279
authors	Abdelmohsen, Sherif M. and Massoud, Passaint M.
year	2015
title	Making Sense of those Batteries and Wires: Parametric Design between Emergence and Autonomy
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 279-296.
summary	This paper reports on the process and outcomes of a digital design studio that integrates parametric design and generative systems in architectural and urban design projects. It explores the interrelationship between the emergence of innovative formal representations using parametric design systems on the one hand, and design autonomy; more specifically the conscious process of generating and developing an architectural concept, on the other. Groups of undergraduate students working on an architectural project are asked to identify a specific conceptual parti that addresses an aspect of architectural quality, define strategies that satisfy those aspects, and computational methodologies to implement those strategies, such as rule-based systems, self-organization systems, and genetic algorithms. The paper describes the educational approach and studio outcomes, discusses implications for CAAD education and curricula, and addresses issues to be considered for parametric and generative software development.
keywords	Parametric modeling, generative design, emergence, autonomy, design exploration, CAAD curriculum.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	ecaade2015_138
id	ecaade2015_138
authors	Achten, Henri
year	2015
title	Closing the Loop for Interactive Architecture - Internet of Things, Cloud Computing, and Wearables
doi	https://doi.org/10.52842/conf.ecaade.2015.2.623
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 623-632
wos	WOS:000372316000069
summary	Interactive architecture occurs in buildings when part of the building engages in exchange of information with the user, in such a way that the interactive system adjusts it's assumptions about the user's needs and desires. Acquiring the user's needs and desires is no trivial task. Currently there are no techniques that will reliably make such assertions. Building a system that unobtrusively monitors the inhabitant seems to be a tall order, and making the system ask the user all the time is very distracting for the user. An alternative option has become available however: personal wearables are increasingly monitoring the user. Therefore it suffices that the interactive system of the building gets in touch with those wearables, rather than duplicating the sensing function of the wearables. The enabling technology for wearables is Internet of Things, which connects physical objects (smart objects) on a virtual level, and Cloud Computing, which provides a scalable storage environment for wearables and smart objects. In this paper we outline the implications of the convergence of these three technologies in the light of interactive architecture.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=fdd9e706-6e8f-11e5-b1d4-00190f04dc4c
last changed	2022/06/07 07:54

_id	acadia21_530
id	acadia21_530
authors	Adel, Arash; Augustynowicz, Edyta; Wehrle, Thomas
year	2021
title	Robotic Timber Construction
doi	https://doi.org/10.52842/conf.acadia.2021.530
source	ACADIA 2021: Realignments: Toward Critical Computation [Proceedings of the 41st Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-986-08056-7]. Online and Global. 3-6 November 2021. edited by S. Parascho, J. Scott, and K. Dörfler. 530-537.
summary	Several research projects (Gramazio et al. 2014; Willmann et al. 2015; Helm et al. 2017; Adel et al. 2018; Adel Ahmadian 2020) have investigated the use of automated assembly technologies (e.g., industrial robotic arms) for the fabrication of nonstandard timber structures. Building on these projects, we present a novel and transferable process for the robotic fabrication of bespoke timber subassemblies made of off-the-shelf standard timber elements. A nonstandard timber structure (Figure 2), consisting of four bespoke subassemblies: three vertical supports and a Zollinger (Allen 1999) roof structure, acts as the case study for the research and validates the feasibility of the proposed process.
series	ACADIA
type	project
email
last changed	2023/10/22 12:06

_id	ecaade2015_280
id	ecaade2015_280
authors	Adilenidou, Yota
year	2015
title	Error as Optimization - Using Cellular Automata Systems to Introduce Bias in Aggregation Models through Multigrids
doi	https://doi.org/10.52842/conf.ecaade.2015.2.601
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 601-610
wos	WOS:000372316000067
summary	This paper is focusing on the idea of error as the origin of difference in form but also as the path and the necessity for optimization. It describes the use of Cellular Automata (CA) for a series of structural and formal elements, whose proliferation is guided through sets of differential grids (multigrids) and leads to the buildup of big span structures and edifices as, for example, a cathedral. Starting from the error as the main idea/tool for optimization, taxonomies of morphological errors occur and at a next step, they are informed with contextual elements to produce an architectural system. A toolbox is composed that can be implemented in different scales and environmental parameters, providing variation, optimization, complexity and detail density. Different sets of experiments were created starting from linear structural elements and continuing to space dividers and larger surface components.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=5cf73be0-6e8f-11e5-b7a4-1b188b87ef84
last changed	2022/06/07 07:54

_id	acadia19_168
id	acadia19_168
authors	Adilenidou, Yota; Ahmed, Zeeshan Yunus; Freek, Bos; Colletti, Marjan
year	2019
title	Unprintable Forms
doi	https://doi.org/10.52842/conf.acadia.2019.168
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp.168-177
summary	This paper presents a 3D Concrete Printing (3DCP) experiment at the full scale of virtualarchitectural bodies developed through a computational technique based on the use of Cellular Automata (CA). The theoretical concept behind this technique is the decoding of errors in form generation and the invention of a process that would recreate the errors as a response to optimization (Adilenidou 2015). The generative design process established a family of structural and formal elements whose proliferation is guided through sets of differential grids (multi-grids) leading to the build-up of large span structures and edifices, for example, a cathedral. This tooling system is capable of producing, with specific inputs, a large number of outcomes in different scales. However, the resulting virtual surfaces could be considered as "unprintable" either due to their need of extra support or due to the presence of many cavities in the surface topology. The above characteristics could be categorized as errors, malfunctions, or undesired details in the geometry of a form that would need to be eliminated to prepare it for printing. This research project attempts to transform these "fabrication imprecisions" through new 3DCP techniques into factors of robustness of the resulting structure. The process includes the elimination of the detail / "errors" of the surface and their later reinsertion as structural folds that would strengthen the assembly. Through this process, the tangible outputs achieved fulfill design and functional requirements without compromising their structural integrity due to the manufacturing constraints.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2015_18
id	ecaade2015_18
authors	Agkathidis, Asterios
year	2015
title	Generative Design Methods - Implementing Computational Techniques in Undergraduate Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.2015.2.047
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 47-55
wos	WOS:000372316000007
summary	In continuation to the Deceptive Landscape Installation research project (Agkathidis, Kocatürk 2014), this paper investigates the implementation of generative design techniques in undergraduate architectural design education. After reviewing the main definitions of generative design synoptically, we have assessed the application of a modified generative method on a final year, undergraduate design studio, in order to evaluate its potential and its suitability within the framework of a research led design studio, leading to an RIBA accredited Part I degree. Our research findings based on analysis of the design outputs, student performance, external examiners reports as well as student course evaluation surveys indicate a positive outcome on the studio's design approach, as well as its suitability for an undergraduate design studio. They initiate a flourishing debate about accomplishments and failures of a design methodology, which still remains alien to many undergraduate curricula.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=e6f673d4-6e8e-11e5-be22-93874392c2e4
last changed	2022/06/07 07:54

_id	ecaade2024_35
id	ecaade2024_35
authors	Agkathidis, Asterios; Song, Yang; Symeonidou, Ioanna
year	2024
title	AI-Assisted Design: Utilising artificial intelligence as a generative form-finding tool in architectural design studio teaching
doi	https://doi.org/10.52842/conf.ecaade.2024.2.619
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 2, pp. 619–628
summary	Artificial Intelligence (AI) tools are currently making a dynamic appearance in the architectural realm. Social media are being bombarded by word-to-image/image-to-image generated illustrations of fictive buildings generated by tools such as ‘Midjourney’, ‘DALL-E’, ‘Stable Diffusion’ and others. Architects appear to be fascinated by the rapidly generated and inspiring ‘designs’ while others criticise them as superficial and formalistic. In continuation to previous research on Generative Design, (Agkathidis, 2015), this paper aims to investigate whether there is an appropriate way to integrate these new technologies as a generative tool in the educational architectural design process. To answer this question, we developed a design workflow consisting of four phases and tested it for two semesters in an architectural design studio in parallel to other studio units using conventional design methods but working on the same site. The studio outputs were evaluated by guest critics, moderators and external examiners. Furthermore, the design framework was evaluated by the students through an anonymous survey. Our findings highlight the advantages and challenges of the utilisation of AI image synthesis tools in the educational design process of an architectural design approach.
keywords	AI, GAI, Generative Design, Design Education
series	eCAADe
email
last changed	2024/11/17 22:05

_id	ecaade2015_278
id	ecaade2015_278
authors	Aguiar, Rita and Gonçalves, Afonso
year	2015
title	Programming for Architecture: The Students’ Point of View
doi	https://doi.org/10.52842/conf.ecaade.2015.2.159
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 159-168
wos	WOS:000372316000020
summary	The following paper presents a reflection on computational design education in Architecture schools. For approaching this subject, the specific case of the Programming for Architecture course taught at Instituto Superior Técnico - Universty of Lisbon is presented and analyzed through the students' point of view. The aim of the course is to focus on representation methods through programming, introducing the fundamentals of computational approach to architectural design. We will explain and discuss the subject teaching methods, the structure of the course and the school environment. Also we will express the students' opinion regarding the class organization, the contents of the program and the usefulness of programming, as well as suggestions for an improved strategy for teaching computational methods to Architecture students.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=833a3bb0-6f78-11e5-9635-174d5ee09923
last changed	2022/06/07 07:54

For more results click below: