Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 518

Reformat results as: short short into frame detailed detailed into frame

_id	acadia15_371
id	acadia15_371
authors	Hatefnia, Navid; Ghobad, Marjan
year	2015
title	Computing Outdoor Comfort Based on CBE Thermal Comfort Calculation for Ashrae-55
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 371-480
doi	https://doi.org/10.52842/conf.acadia.2015.371
summary	Environmental analysis as part of the initial design process, affords precise consideration of the bioclimatic human conditions within the environmental local context. The daily growth in inter alia knowledge of effective parameters in environmental conditions, quality weather data, human thermo-physiology studies – all contribute to improving the potential for achieving a relatively accurate analyses of environmental conditions by overlaying and computing all the climatic and thermo-physiological data. This paper describes a digital method for examining different points in the same context by computing all the input data available to understand the corresponding human comfort condition levels, thus leading to better decision-making at early design stages. Information about the site, climate, human thermo-physiology and behavioral aspects among others are collected where each data parameter is matched and analyzed to the context of every node on the model through a series of specific computational algorithms. Thereafter, the data from the nodes are statistically cleaned, classified and integrated based on the CBE thermal comfort calculation for ASHRAE-55. The results obtained using this method, can be tailored according to the desired outcomes. The proposed method identifies effective factors for human comfort condition improvement for different points on the context. It also provides a means to priorities specific parameters so that they can be manipulated for optimal digital design solutions, ie. Aligned to the desired conditions in the specific parts of the site with the aim of optimize outdoor space usage.
keywords	Micro-Climate, Outdoor Comfort, Urban Design, Environmental Aspects, Bio-Climatic Conditions
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:49

_id	cf2015_205
id	cf2015_205
authors	Oliveira, Eduardo; Kirley, Michael; Kvan, Tom; Karakiewicz, Justyna and Vaz, Carlos
year	2015
title	Distributed and heterogeneous data analysis for smart urban planning
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 205.
summary	Over the past decade, ‘smart’ cities have capitalized on new technologies and insights to transform their systems, operations and services. The rationale behind the use of these technologies is that an evidence-based, analytical approach to decision-making will lead to more robust and sustainable outcomes. However, harvesting high-quality data from the dense network of sensors embedded in the urban infrastructure, and combining this data with social network data, poses many challenges. In this paper, we investigate the use of an intelligent middleware – Device Nimbus – to support data capture and analysis techniques to inform urban planning and design. We report results from a ‘Living Campus’ experiment at the University of Melbourne, Australia focused on a public learning space case study. Local perspectives, collected via crowdsourcing, are combined with distributed and heterogeneous environmental sensor data. Our analysis shows that Device Nimbus’ data integration and intelligent modules provide high-quality support for decision-making and planning.
keywords	smart city, smart campus, middleware, data fusion, urban design, urban planning.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	ecaade2015_114
id	ecaade2015_114
authors	Roggema, Rob and Nikolay, Popov
year	2015
title	Swarm Planning: Development of Generative Spatial Planning Tool for Resilient Cities
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 519-527
doi	https://doi.org/10.52842/conf.ecaade.2015.1.519
wos	WOS:000372317300056
summary	In dealing with unexpected impacts of climate change current spatial planning tools are irresponsive and inflexible. The outcomes of applications of these tools are very limited in number, producing static plans that if implemented are very vulnerable to climate hazards. Therefore, an innovative generative tool has been developed to support spatial planning which results in designs that are responsive and adjustable to unexpected, simulated changes. The development of the generative tool is informed by swarm planning theory, and by contemporary generative approaches in urban design and planning. The generative tool is modeled as an Agent-Based System and utilizes versions of the canonical flocking algorithm. The agents are abstract cubical units of space that represent building envelopes. The agents exist and work within an environment that represents a site in terms of topography, land value, and available/buildable land. The agents receive information from the environment and act upon this information. The unexpected climate impact is a simulated flood, which affects both the environment and the agents. The outputs of the tool are generated 'bottom-up' in order to study emergent spatial configurations, as massings of building units.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=205afb0c-7107-11e5-9c2a-17072d6ddcaa
last changed	2022/06/07 07:56

_id	caadria2015_168
id	caadria2015_168
authors	Tong, Ziyu
year	2015
title	A Genetic Algorithm Approach to Optimizing the Distribution of Buildings in Urban Green Space
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 147-156
doi	https://doi.org/10.52842/conf.caadria.2015.147
summary	Certain buildings are required in urban green space according to the Chinese regulations, and their area depends on the type and area of the green space. The scale of the single building or the disperse extent of the building group dramatically influences the local ecological environment and landscape. However, it is lack of effective methods to evaluate the distribution of buildings, and it is hard to plan and manage the buildings in the green space. According to the description of distribution features of geographic objects in geostatistics, this study presents the Index of Distribution (IOD) to describe the distribution pattern of buildings in the green space. Yuhuatai Park and Qingliangshan Park of Nanjing are chosen as cases to verify the effectiveness of IOD. Based on the genetic algorithm, the paper also presents a generating model, which can generate the plan of the buildings corresponding with the specific IOD. The model is effective to respond with the flexibility of location of the building. The results of the model can be used as the valuable reference to the planning of buildings in the green space.
keywords	Genetic algorithm; index of distribution; green space.
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	cf2015_135
id	cf2015_135
authors	Cuperschmid, Ana Regina M.; Ruschel, Regina C. and Monteiro, Ana Maria R. de G.
year	2015
title	Augmented Reality: Recognition of Multiple Models Simultaneously
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 135-154.
summary	The problem at hand is to ensure that the perception by means of Augmented Reality (AR) is hence reliable and opinions resulting from a Participatory Design (PD) mediated by this technology could be incorporated into the design solution. This paper presents the evaluation of multiple 3D models recognition in AR, with or without an auxiliary projection. Leisure area designs involve urban equipment of various dimensions that are visualized simultaneously. Therefore, it was necessary to verify if the participants were capable of recognizing them and which would be the best way to visualize: exclusively with the iPad screen or with the iPad associated with an external projection – to verify whether the visualization using an external projection would amplify the visualization area. The results obtained in the evaluation were used to improve the AR application and also, to develop guidelines for the AR use in a PD.
keywords	Augmented Reality, Recognition, User Experience Evaluation.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	cf2015_325
id	cf2015_325
authors	Lo, Tian Tian; Schnabel, Marc Aurel and Gao, Yan
year	2015
title	ModRule: A user-centric mass housing design platform
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 325.
summary	This paper presents a novel platform, ModRule, designed and developed to promote and facilitate collaboration between architects and future occupants during the design stage of mass housing buildings. Architects set the design-framework and parameters of the system, which allows the users to set their space requirements, budgets, etc., and define their desired way of living. The system utilizes gamification methodologies as a reference to promote incentives and user-friendliness for the layperson who has little or no architectural background. This enhanced integration of a both bottom-up approach (user-centric/player) with a top-down approach (architect-centric/game-maker) will greatly influence how architects design high rise living. By bridging the gap between the architect and the user, this development aims to instill a greater sense of belonging to people, as well as providing architects with a better understanding of how to give people more control over their living spaces. The paper also presents an evaluation of a design process that employed ModRule.
keywords	Mass housing, collaborative design, participatory system.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	sigradi2015_12.297
id	sigradi2015_12.297
authors	Parra-Agudelo, Leonardo; Choi, Jaz Hee-Jeong
year	2015
title	Identifying Opportunity Spaces for Design Research in South America: Working with Grassroots and Community Groups
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 724-730.
summary	As design research continues to gain momentum in South America, design researchers and practitioners in the region have begun to consider how to the field may address regionally-specific issues, including on-going political struggles. By bringing approaches such as Participatory Design and Adversarial Design that consider political aspects of design, local researchers have explored various forms that these two approaches could take that are tailored to the needs and values of different communities across the region. This paper focuses on identifying opportunities for developing design research projects in community-based and grassroots-oriented contexts. The paper presents the findings of our study about the understanding and experience of design researchers and experts who have been working closely with community groups and grassroots organisations in South America. Five themes emerged, highlighting opportunities and challenges related to positioning contemporary design research in the region, integration of adversarial perspectives into design processes, leveraging local obstacles through creativity, and the potential of building capacity within community groups and grassroots organisations for sustainability and autonomy.
keywords	Design Research, South America, Interaction Design, Urban Informatics, Grassroots Communities
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	eaea2015_t3_paper03
id	eaea2015_t3_paper03
authors	Agajew, Maria
year	2015
title	The Prestige and the Money – the Main Goal and the Main Tool in Planning of the City Image in the 21st Century?
source	ENVISIONING ARCHITECTURE: IMAGE, PERCEPTION AND COMMUNICATION OF HERITAGE [ISBN 978-83-7283-681-6],Lodz University of Technology, 23-26 September 2015, pp.299-308
summary	This paper discusses the process of changing in the historical town – Baku in Azerbaijan in comparison to the achievements of European urban planners and architects (for example in: Paris, Vienna, Dublin). In Baku the fast and unlimited development and many investments in the public spaces have caused a lot of transformation not always to the better vision of the image of the city. At the same time, the development in some European cities is proceeding in other ways, preserving existing historical built environment.
keywords	image of the city; revitalization; development
series	EAEA
email
last changed	2016/04/22 11:52

_id	caadria2015_237
id	caadria2015_237
authors	Bazalo, Frano. and Tane J. Moleta
year	2015
title	Responsive Algorithms
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 209-218
doi	https://doi.org/10.52842/conf.caadria.2015.209
summary	An algorithm is a process of addressing a problem in a finite number of steps. In the context of architectural design, algorithmic thinking means taking on an interpretive role to understand the results in relation to design criteria, knowing how to modify the code to explore new options, and speculating on further design potentials. The application of algorithms within architecture often addresses the developed design stages, primarily to optimise structure, test environmental performance or to resolve complex construction. This research aims to explore algorithmic tools with a focus on early stage design. This design stage is often developed using traditional processes and is where algorithmic applications have been less successfully executed. The objectives are to algorithmically explore the areas of space planning, programme layout, form finding and form optimisation within early stage architectural design. Through the combination of a range of diverse algorithms, this research has an ultimate aim of integrating a computational workflow into practice at the early design stage.
keywords	Computational design, Early stage design
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2015_268
id	cf2015_268
authors	Benedetto, Henrique; Kipper, Fabrício A.;Marques, Vinícius and Bruscato, Underléa M.
year	2015
title	Development of Parklets by using parametric modeling
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 268-278.
summary	The lack of urban planning has made the recreation areas increasingly smaller in the cities. Parks and squares gradually gave way to streets and avenues to try to accommodate the growing number of cars and motorcycles. An alternative that tries to balance recreation areas and urban roads was found in the city of San Francisco (USA). Parklets are temporary extensions of urban sidewalks that occupy a few parking spaces. This article aims to demonstrate the potential of parametric modeling in the development of parklets. Thus, anthropometric studies, amount of parking spaces and types of benches were used as input parameters. Rhinoceros and grasshopper programs were used for modeling, while 3D Studio Max was used for rendering. With this study it was possible to verify that when the project is parameterized the processes of creation and modification became faster, reducing design and implementation time.
keywords	Grasshopper algorithm editor, Parametric model, Parklets.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	sigradi2015_11.166
id	sigradi2015_11.166
authors	Calixto, Victor; Celani, Gabriela
year	2015
title	A literature review for space planning optimization using an evolutionary algorithm approach: 1992-2014
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 662-671.
summary	Space planning in architecture is a field of research in which the process of arranging a set of space elements is the main concern. This paper presents a survey of 31 papers among applications and reviews of space planning method using evolutionary algorithms. The objective of this work was to organize, classify and discuss about twenty-two years of SP based on an evolutionary approach to orient future research in the field.
keywords	Space Planning, Evolutionary algorithms, Generative System
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2015_124
id	cf2015_124
authors	de Souza, Douglas Lopes; Martinez, Andressa Carmo Pena and Santos, Denise de Mônaco
year	2015
title	The Potential Use of Laser Scanner in Urban Contexts
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 124-134.
summary	3D laser scanner is an instrument that employs LiDAR technology to map out objects in space by means of remote detection. In Architecture, digital mapping through 3D laser scanning mainly aims at creating digital surface models based on instant recordings of still objects, whereas lived spaces such as squares, streets, and urban surroundings presuppose the presence of people on the move. This paper presents some preliminary results of an investigation on the use of 3D laser scanning in urban contexts. It seeks to examine experimental data on moving people obtained in point clouds and discuss their operationalization possibilities and limitations. The main goal of this investigation is to assess the potential of this technology for use as a research tool and in city-scale design processes.
keywords	3D laser scanning technology, motion modeling, geometrical modeling, computational tools, urban survey.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	sigradi2015_2.137
id	sigradi2015_2.137
authors	Hernández, Silvia Patricia; Verón, María José; Mengo, Gabriela; Figueroa, María Elena; Rezk, Alejandra; Lanzone, Luciana; Landerberg, Raquel; Verón, María José; Prigioni, Eugenia
year	2015
title	Microarchitecture urban inmotic. Design proposal of useful inmotics and parametrics spaces of interaction with space and environment
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 40-45.
summary	The evaluation of possibilities, ways and technologies used for the application of domotics in our country, Argentina, was continued. This design proposal evolved from the one of 2014. It was considered technologies and design improvements as for micro-architecture, inmotics, sustainability and parametric design, implementing them into an useful design for a specific urban interstitial space. The function answers to a sociologic requirement study of function and interactivity endorsed by polls. This project aims to be build, as it follows the laws that regulate this city.
keywords	Microarchitecture, Inmotics, Parametrics, Sustainable, Interaction
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	ecaade2015_164
id	ecaade2015_164
authors	Jang, Sun-Young and Sung-AhKim
year	2015
title	SMART ALLEY: A Platform for Sharing Experience in a Community Space Augmented by Urban Media
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 529-538
doi	https://doi.org/10.52842/conf.ecaade.2015.1.529
wos	WOS:000372317300057
summary	This research proposed an urban platform designed to facilitate the sharing of community experience in the spatial context of traditional 'alley'. 'Smart Alley' refers to a smart space in which various urban media, supported with IoT technologies, interplays so that the creation and consumption of media content leads to vivid social interactions in this specific urban space. The proposed urban platform is driven by the Content Management System (CMS). An urban ontology works as a logic model of the CMS. This paper focused on the conceptualization and design of both CMS and ontology modules within the smart alley framework. Outcomes from the 'Smart Alley Workshop' are presented, which was conducted to develop smart services to utilize the smart alley platform.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=46747512-70d9-11e5-8c55-3fd06eb60931
last changed	2022/06/07 07:52

_id	acadia15_451
id	acadia15_451
authors	Jyoti, Aurgho
year	2015
title	High Rise Morphologies: Architectural Form Finding in a Performative Design Search Space of Dense Urban Contexts
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 451-467
doi	https://doi.org/10.52842/conf.acadia.2015.451
summary	A routine is a fixed program, a sequence of actions regularly followed. And the concept can be adapted at different levels in the understanding of the dynamics of cities. Today's built environments are in fact increasingly characterized by series of iterations daily performed by infrastructures, networks, buildings, and people ? as part of a well-structured pattern of components. In this sense, the city becomes a system that not only creates routine, but also pushes its urban mechanisms, its architectural spaces, and its human interactions towards performance, efficiency and the 'standard.' A-priori and top-down implementations of new technologies emphasize routine-based built environments, leaving almost no room for the (extra)ordinary. But how can the spaces, infrastructures, and places that define the social experience of tangible environments not incorporate elements of inherent spontaneity, informality, and even error that let us break routine patterns?
keywords	Architectural Form Finding, Optimisation, Performative Design Environment, Urban Daylight, Solar Irradiation, Direct Sunlight, Point Cloud, Voxelised Colonies
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:52

_id	cf2017_111
id	cf2017_111
authors	Kepczynska-Walczak, Anetta; Pietrzak, Anna
year	2017
title	An Experimental Methodology for Urban Morphology Analysis
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, p. 111.
summary	The paper presents results of a research conducted in 2015 and 2016 at Lodz University of Technology. It proposes a purpose and context fit approach towards the automation of urban data generation based on GIS tools and New Urbanism typologies. First, background studies of methods applied in urban morphology analysis are revealed. Form-Based Code planning, and subsequently Transect-Based Code are taken into account. Then, selected examples from literature are described and discussed. Finally, the research study is presented and the outcomes compared with more traditional methodology.
keywords	GIS, Urban morphology, Spatial analysis, Decision support systems, Urban design, Data analytics, Modelling and simulation
series	CAAD Futures
email
last changed	2017/12/01 14:37

_id	sigradi2017_095
id	sigradi2017_095
authors	Kirschner, Ursula
year	2017
title	A Hermeneutic Interpretation of Concepts in a Cooperative Multicultural Working Project [A Hermeneutic Interpretation of Concepts in a Cooperative Multicultural Working Project]
source	SIGraDi 2017 [Proceedings of the 21th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-227-439-5] Chile, Concepción 22 - 24 November 2017, pp.659-665
summary	What are frontier zones in contemporary urban cities? This research project was developed in cooperation with an interdisciplinary group of researchers and students from Brazil and Germany and launched with an International Summer School in São Paulo in 2015. Its aim was to explore and invent urban spaces using the method of documentary film making as a medium to provide new insights and readings of the contemporary city. In Germany we analyzed these film productions by examining the main topics of the frontier zones in São Paulo. The method of documentary film making was once again chosen for the hermeneutic interpretation.
keywords	Perception of space; documentary film making; hermeneutic analysis
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	cf2015_484
id	cf2015_484
authors	Liao, Kai; Vries, Bauke de; Kong, Jun and Zhang, Kang
year	2015
title	Pattern, cognition and spatial information processing: Representations of the spatial layout of architectural design with spatial-semantic analytics
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 484.
summary	In this paper, we review and extend the idea of Alexander’s “pattern language”, especially from the viewpoints of complexity theories, information systems, and human-computer interaction, to explore spatial cognition-based design representations for “intelligent and adaptive/interactive environment” in architecture and urban planning. We propose a theoretic framework of design patterns “with spatial information processing”, and attempt to incorporate state-of-the-art computational methods of information visualization/visual analytics into the conventional CAAD approaches. Focused on the spatial-semantic analytics, together with abstract syntactic pattern representation, by using “spatial-semantic aware” graph grammar formalization, i.e., Spatial Graph Grammars (SGG), the relevant models, algorithms and tool are proposed. We testify our theoretic framework and computational tool VEGGIE (a Visual Environment of Graph Grammar Induction Engineering) by using actual architectural design works (spatial layout exemplars of a small office building and the three house projects by Frank Lloyd Wright) as study cases, so as to demonstrate our proposed approach for practical applications. The results are discussed and further research is suggested.
keywords	Pattern language, complex adaptive systems, spatial cognition, design representations, spatial information processing, Artificial Intelligence, visual language, Spatial Graph Grammars (SGG), spatial-semantic analytics.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	sigradi2015_11.142
id	sigradi2015_11.142
authors	Lima, Fernando; Paraízo, Rodrigo Cury; Kos, Jose Ripper
year	2015
title	Generative approaches in urban planning: optimization experiments for Transit Oriented Development principles
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 649-656.
summary	This article focuses on the use of computational tools to provide dynamic assessment and optimized arrangements while planning and discussing interventions in urban areas. The objective is to address the use of algorithmic systems for evaluating and generating urban morphologies guided by Transit Oriented Development (TOD) principles. TOD is an urban development model that considers geometric and measurable parameters for designing sustainable cities. It advocates the creation of compact mixed-use neighborhoods within walking distance to a variety of transportation options and amenities, seeking to result on optimized infrastructure provision and energy efficient low-carbon districts. This paper presents algorithmic experiments for proposing a rapid-transit district, by the optimization of its urban morphology and services’ location, providing an accurate and efficient TOD principles-oriented modelling.
keywords	Generative design, Transit Oriented Development, Optimization
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	eaea2015_t1_paper05
id	eaea2015_t1_paper05
authors	Lobo de Carvalho, Jose Maria; Heitor, Teresa
year	2015
title	The Adaptive Reuse of the Arco do Cego ancient Car-Barn Structure in Lisbon
source	ENVISIONING ARCHITECTURE: IMAGE, PERCEPTION AND COMMUNICATION OF HERITAGE [ISBN 978-83-7283-681-6],Lodz University of Technology, 23-26 September 2015, pp.61-70
summary	This paper presents the example of the reconversion of an important tram station from the origins of electricity in Portugal that was still in use until the late 1990’s but became redundant since then. Its significant urban presence and the importance of preserving the memory of the old trams that were still in use some years ago in Lisbon, led to an innovative solution, combining public value and heritage protection. In 2011, the Lisbon City Council agreed to give the building and its site for university use, namely to be transformed into a student’s facility, as a study, leisure, recreational and cultural space of the IST, open 24h a day. This new university building, located just one block away from the traditional IST compound, was called IST Learning Center and extended the notion of campus outside its walls and into the city’s urban fabric.
keywords	reconversion; university; tram
series	EAEA
email
last changed	2016/04/22 11:52

For more results click below: