Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 591

Reformat results as: short short into frame detailed detailed into frame

_id	acadia15_371
id	acadia15_371
authors	Hatefnia, Navid; Ghobad, Marjan
year	2015
title	Computing Outdoor Comfort Based on CBE Thermal Comfort Calculation for Ashrae-55
doi	https://doi.org/10.52842/conf.acadia.2015.371
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 371-480
summary	Environmental analysis as part of the initial design process, affords precise consideration of the bioclimatic human conditions within the environmental local context. The daily growth in inter alia knowledge of effective parameters in environmental conditions, quality weather data, human thermo-physiology studies – all contribute to improving the potential for achieving a relatively accurate analyses of environmental conditions by overlaying and computing all the climatic and thermo-physiological data. This paper describes a digital method for examining different points in the same context by computing all the input data available to understand the corresponding human comfort condition levels, thus leading to better decision-making at early design stages. Information about the site, climate, human thermo-physiology and behavioral aspects among others are collected where each data parameter is matched and analyzed to the context of every node on the model through a series of specific computational algorithms. Thereafter, the data from the nodes are statistically cleaned, classified and integrated based on the CBE thermal comfort calculation for ASHRAE-55. The results obtained using this method, can be tailored according to the desired outcomes. The proposed method identifies effective factors for human comfort condition improvement for different points on the context. It also provides a means to priorities specific parameters so that they can be manipulated for optimal digital design solutions, ie. Aligned to the desired conditions in the specific parts of the site with the aim of optimize outdoor space usage.
keywords	Micro-Climate, Outdoor Comfort, Urban Design, Environmental Aspects, Bio-Climatic Conditions
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:49

_id	cf2015_268
id	cf2015_268
authors	Benedetto, Henrique; Kipper, Fabrício A.;Marques, Vinícius and Bruscato, Underléa M.
year	2015
title	Development of Parklets by using parametric modeling
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 268-278.
summary	The lack of urban planning has made the recreation areas increasingly smaller in the cities. Parks and squares gradually gave way to streets and avenues to try to accommodate the growing number of cars and motorcycles. An alternative that tries to balance recreation areas and urban roads was found in the city of San Francisco (USA). Parklets are temporary extensions of urban sidewalks that occupy a few parking spaces. This article aims to demonstrate the potential of parametric modeling in the development of parklets. Thus, anthropometric studies, amount of parking spaces and types of benches were used as input parameters. Rhinoceros and grasshopper programs were used for modeling, while 3D Studio Max was used for rendering. With this study it was possible to verify that when the project is parameterized the processes of creation and modification became faster, reducing design and implementation time.
keywords	Grasshopper algorithm editor, Parametric model, Parklets.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	ecaade2015_194
id	ecaade2015_194
authors	Kaushik, Vignesh and Janssen, Patrick
year	2015
title	Urban Windflow:Investigating the use of animation software for simulating windflow around buildings
doi	https://doi.org/10.52842/conf.ecaade.2015.1.225
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 225-234
summary	The animation and visual effects industry is producing advanced software capable of generating realistic behaviours faster than ever by using algorithms that approximate the physics of the real world. There is an opportunity to utilize these software to support performance-based conceptual design for complex simulations such as Computational Fluid Dynamics (CFD). This paper investigates a method of performing windflow simulation using an animation software that implements an Eulerian based smoke solver. These simulations run orders of magnitude faster than the similar simulations in dedicated high-end CFD applications. The paper compares the animated simulation results to a benchmark case with measured wind-tunnel data. The results indicate that at certain points in the animation, the accuracy is very high. However, the challenge lies in predicting best frame at which to stop the animation. The paper ends with a discussion of how this challenge might be tackled.
wos	WOS:000372317300024
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=c02da8d0-702d-11e5-ba25-7396141e161c
last changed	2022/06/07 07:52

_id	ecaade2015_285
id	ecaade2015_285
authors	Lopes, João V.; Paio, Alexandra, Beirão, José N., Pinho, Eliana Manuel and Nunes, Luís
year	2015
title	Multidimensional Analysis of Public Open Spaces - Urban Morphology, Parametric Modelling and Data Mining
doi	https://doi.org/10.52842/conf.ecaade.2015.1.351
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 351-360
summary	Public open spaces (parks, squares and other gathering places) can only be grasped from a simultaneous view of their attributes. In an ongoing Phd research project we propose to overcome the limitations of traditional-descriptive urban morphology methods in dealing with this simultaneity derived from their many shapes, functions, uses and relations within the urban structure. After developing the relations between formal attributes and intangible spatial properties, their identity and proximity may be disclosed by multivariate statistical analysis and data mining techniques. We outline a multidimensional method for the synchronic analysis and classification of the public open spaces departing from a research corpus of 126 Portuguese urban squares, whose analysis is intended to interactively (re)define it. The work done so far is presented, which comprises: (i) firming the concepts, criteria and attributes to extract; (ii) survey on theories, methods and spatial analysis tools and shortcomings identification; (iii) adaptation and/or creation of new methods and tools; (iv) creation of databases from CAD and GIS environments; (v) research on multivariate analysis, data mining and data visualization techniques.
wos	WOS:000372317300038
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=975efcfa-7029-11e5-a1a9-9786dd4d89a9
last changed	2022/06/07 07:59

_id	ecaade2015_64
id	ecaade2015_64
authors	Nourian, Pirouz; Rezvani, Samaneh, Sariyildiz, Sevil and Hoeven, Franklinvander
year	2015
title	CONFIGURBANIST - Urban Configuration Analysis for Walking and Cycling via Easiest Paths
doi	https://doi.org/10.52842/conf.ecaade.2015.1.553
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 553-564
summary	In a quest for promoting sustainable modes of mobility, we have revisited how feasible and suitable is it for people to walk or cycle to their destinations in a neighbourhood. We propose a few accessibility measures based on an 'Easiest Path' algorithm that provides also actual temporal distance between locations. This algorithm finds paths that are as short, flat and straightforward as possible. Considering several 'points of interest', the methods can answer such questions as “do I have a 5 minutes 'easy' walking/cycling access to all/any of these points?” or, “which is the preferred point of interest with 'easy' walking cycling access?” We redefine catchment zones using Fuzzy logics and allow for mapping 'closeness' considering preferences such as 'how far' people are willing to go on foot/bike for reaching a particular destination. The accessibility measures are implemented in the toolkit CONFIGURBANIST to provide real-time analysis of urban networks for design and planning.
wos	WOS:000372317300060
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=b1dffea2-70d9-11e5-8e0c-0377ddcc509c
last changed	2022/06/07 08:00

_id	caadria2015_170
id	caadria2015_170
authors	Chen, Yu Chen and Chao-Ming Wang
year	2015
title	The Research of Human-Computer Interaction by Combining Affective Computing into Chinese Calligraphy Art
doi	https://doi.org/10.52842/conf.caadria.2015.055
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 55-64
summary	Calligraphy is one of the important cultures in Chinese world. The rich strokes, structures and forms make the Chinese calligraphy an art. As the writing script is closely correlated to the emotions of the writer, a lot of scholars explore the correlation between the Chinese calligraphy lines and affect from the perspectives of psychology and art. In this study, it introduces the affective-computing technology and combines the digital media from the perspective of Chinese calligraphy and emotions, to develop an interactive calligraphy-art device. It re-interprets the Chinese calligraphy art with the digital tool and installs the pulse sensor and pressure sensor in the Chinese pen brush, so as to detect the user’s pulse and writing power. Moreover, it converts the physiological signals into affect and provides visual feedback in real time, which includes the changes and motions of the Chinese calligraphy lines. The study proposes contacting the traditional Chinese calligraphy with a new human-computer interaction mode. With the visual feedback effect during the interaction, it allows the user to know the close correlation between the Chinese calligraphy and the emotions. Through the work, the Chinese calligraphy art can be carried forward.
keywords	Chinese Calligraphy Art; Human-Computer Interaction; Affective Computing.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	cf2015_279
id	cf2015_279
authors	Abdelmohsen, Sherif M. and Massoud, Passaint M.
year	2015
title	Making Sense of those Batteries and Wires: Parametric Design between Emergence and Autonomy
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 279-296.
summary	This paper reports on the process and outcomes of a digital design studio that integrates parametric design and generative systems in architectural and urban design projects. It explores the interrelationship between the emergence of innovative formal representations using parametric design systems on the one hand, and design autonomy; more specifically the conscious process of generating and developing an architectural concept, on the other. Groups of undergraduate students working on an architectural project are asked to identify a specific conceptual parti that addresses an aspect of architectural quality, define strategies that satisfy those aspects, and computational methodologies to implement those strategies, such as rule-based systems, self-organization systems, and genetic algorithms. The paper describes the educational approach and studio outcomes, discusses implications for CAAD education and curricula, and addresses issues to be considered for parametric and generative software development.
keywords	Parametric modeling, generative design, emergence, autonomy, design exploration, CAAD curriculum.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	eaea2015_t3_paper03
id	eaea2015_t3_paper03
authors	Agajew, Maria
year	2015
title	The Prestige and the Money – the Main Goal and the Main Tool in Planning of the City Image in the 21st Century?
source	ENVISIONING ARCHITECTURE: IMAGE, PERCEPTION AND COMMUNICATION OF HERITAGE [ISBN 978-83-7283-681-6],Lodz University of Technology, 23-26 September 2015, pp.299-308
summary	This paper discusses the process of changing in the historical town – Baku in Azerbaijan in comparison to the achievements of European urban planners and architects (for example in: Paris, Vienna, Dublin). In Baku the fast and unlimited development and many investments in the public spaces have caused a lot of transformation not always to the better vision of the image of the city. At the same time, the development in some European cities is proceeding in other ways, preserving existing historical built environment.
keywords	image of the city; revitalization; development
series	EAEA
email
last changed	2016/04/22 11:52

_id	sigradi2015_2.162
id	sigradi2015_2.162
authors	Almeida, Fernando; Andrade, Max
year	2015
title	GIS as a catalyst tool for Smart Cities
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 46-50.
summary	Every building has its individual and measurable role on resources consumption, waste generation and neighborhood impact within a city, and tracking this behavior is an essential task for establishing a sustainable path into a Smart City model. This paper preliminarily investigates how GIS can contribute in creating an integrated and dynamic system built to attend public utilities and urban management offices for parameters at various scales.
keywords	GIS, Smart Cities, Urban Infrastructure, Public Services, Urban Management
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2015_485
id	cf2015_485
authors	Anaf, Márcia and Harris, Ana Lúcia Nogueira de Camargo
year	2015
title	The geometry of Chuck Hoberman as the basis for the development of dynamic experimental structures
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 485.
summary	The cognitive-theoretical foundation referring to teach drawing as a way of thinking, as well as the construction of the environment by means of drawing using transforming geometries and the formal and para-formal computational process, creating unusual geometries through generative design processes and methodologies, can be seen as some of the main possibilities in exploring dynamic experimental structures for an Adaptive Architecture. This article presents the development of a model for articulated facades, inspired by Hoberman´s Tessellates, and his Adaptive Building Initiative (ABI) project to develop facades models that respond in real time to environmental changes. In addition, we describe an experiment based on the retractable structures, inspired by Hoberman´s work and experimentations. Solutions for responsive facades can offer more flexible architectural solutions providing better use of natural light and contributing to saving energy. Using Rhinoceros and the Grasshopper for modeling and test the responsiveness, the parametric model was created to simulate geometric panels of hexagonal grids that would open and close in reaction to translational motion effects, regulating the amount of light that reaches the building.
keywords	Parametric architecture, Hoberman´s Tessellates, Adaptive Building Initiative (ABI), Articulated Facades, Complex Geometries, Retractable structures, Retractable polyhedra.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	sigradi2015_9.347
id	sigradi2015_9.347
authors	Andrade, Eduardo; Orellana, Nicolas; Mesa, Javiera; Felmer, Patricio
year	2015
title	Spatial Configuration and Sociaty. Comparison between the street market Tristan Matta and Tirso de Molina Market
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 481-485.
summary	This research aims to clarify how certain visual and accessibility patterns, in buildings and urban environments, are related to social activities that take place in them. The study, based on the theory of space syntax (Hillier & Hanson 1984; Hillier, 1996), seeks to recognize patterns of behavior, both individual and aggregate. The case studies are Tirso de Molina Market and the free street market Tristan Matta, both in Santiago de Chile.
keywords	pace Syntax, Visibilidad, Accesibilidad, Conectividad, Comportamiento
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	eaea2015_t2_paper02
id	eaea2015_t2_paper02
authors	Astuti, Erika Yuni
year	2015
title	Local Perception of a Conservation Heritage Area, a Case Study of the Darmo Residential Area, Surabaya, Indonesia
source	ENVISIONING ARCHITECTURE: IMAGE, PERCEPTION AND COMMUNICATION OF HERITAGE [ISBN 978-83-7283-681-6],Lodz University of Technology, 23-26 September 2015, pp.132-141
summary	This paper has argued that interdisciplinary approach is necessary to get better understanding of the problem within a built heritage area. It is found that inhabitants perceived the mixed heritage architecture as their own, an appreciation also expressed toward perception values of building: uniqueness, aesthetic and age. The research has also shown that inhabitants in the Darmo residential area - Surabaya, Indonesia perceived that their area are worth to be conserve due to the function such as the city amenities and attribute of the shady environment. Taken together, these results suggest that a better understanding of inhabitant’s awareness will contribute to the successful conservation program.
keywords	urban heritage; historic residential area; inhabitant’s perception of heritage values
series	EAEA
email
last changed	2016/04/22 11:52

_id	sigradi2015_3.370
id	sigradi2015_3.370
authors	Bem, Gabriel Moraes de; Pupo, Regiane Trevisan
year	2015
title	Printing the environment for visually impaired users: a systematic review
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 148-152.
summary	This paper presents the results of a systematic review of 13 databases that aimed to identify which rapid prototyping techniques (RP) have been applied to development of tactile maps and tactile models. For this purpose were adopted the key words tactile map; tactile model; tactile scale model; additive manufacturing; digital fabrication; and rapid prototyping. Only 11 results deal with the PR in the manufacture of the devices. As a result of four cases reviewed, there are benefits from psychological and learning fields and also technical such as the resolution of the elements, its legibility and quality control in manufacturing.
keywords	Visually Impaired User, Mobility, Way finding, Digital Prototyping
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2015_sp_10.16
id	sigradi2015_sp_10.16
authors	Bertoldi, Cristiane Aun; Hanns, Daniela Kutschat
year	2015
title	Using Photographs of Physical Models to Visualize Design Opportunities and Problems
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 810-814.
summary	This paper looks at photographic documentation as a resource for detecting errors, identifying possible design principles and providing guidance for the development of student projects in the course AUP2418 – Three Dimensional Models of the undergraduate curriculum at the Faculty of Architecture and Urban Studies at USP in S?o Paulo, Brazil. This article deals with teaching industrial design models and describes the methodological basis adopted. It also offers examples and analyzes the construction and use of models in order to demonstrate the relevance of photographic documentation during the design process.
keywords	Physical Models, Design, Photography, Teaching, FAUUSP
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2015_8.27
id	sigradi2015_8.27
authors	Boas, Naylor Vilas
year	2015
title	Digital Urban Simulators: Representation and Interaction with the History of the Cities
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 308-316.
summary	This work aims to expose the methodological process of the construction of a digital urban simulator called “SIMRio”, that is being developed at the Laboratory of Digital Representation and Urban Analysis. Constructed with the technology of videogames, through the use of its engines applied to digital 3d models of central area of Rio de Janeiro, the research has the objective to develop interactive systems where one could virtually visit, in real time, not only the spaces of the city, but also different times of its history, walking between them as if were in a digital time machine.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	eaea2015_t3_paper05
id	eaea2015_t3_paper05
authors	Bussiere, Simon M.
year	2015
title	Global Perspectives on Critical Practice: Envisioning Heritage in New Landscapes
source	ENVISIONING ARCHITECTURE: IMAGE, PERCEPTION AND COMMUNICATION OF HERITAGE [ISBN 978-83-7283-681-6],Lodz University of Technology, 23-26 September 2015, pp.319-328
summary	This paper discusses current design and communication imaging techniques in a comparative analysis between three contemporary projects - the first, a new hotel concept in Sardinia, Italy, the second, an urban park in Mumbai, India, and the third, a new housing community in La Prusia, Nicaragua. Starting with an overview discussion problematizing the roots and current state of envisioning heritage, the paper first questions the common oversimplification of envisioning heritage as a strictly aesthetic or stylistic act. Next the paper explores the complex interplay between the design communication methods in each of the three case study projects, situating each in a critical global context. From there, the paper concludes with an expanded discussion of imaging as it relates to design thinking and communication through an examination of the techniques that were employed to graphically communicate each individual project.
keywords	design; communication; heritage
series	EAEA
email
last changed	2016/04/22 11:52

_id	cf2015_005
id	cf2015_005
authors	Celani, Gabriela; Sperling, David M. and Franco, Juarez M. S. (eds.)
year	2015
title	Preface
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 5-13.
summary	Since 1985 the Computer-Aided Architectural Design Futures Foundation has fostered high level discussions about the search for excellence in the built environment through the use of new technologies with an exploratory and critical perspective. In 2015, the 16th CAAD Futures Conference was held, for the first time, in South America, in the lively megalopolis of Sao Paulo, Brazil. In order to establish a connection to local issues, the theme of the conference was "The next city". The city of Sao Paulo was torn down and almost completely rebuilt twice, from the mid 1800s to the mid 1900s, evolving from a city built in rammed-earth to a city built in bricks and then from a city built in bricks to a city built in concrete. In the 21st century, with the widespread use of digital technologies both in the design and production of buildings, cities are changing even faster, in terms of layout, materials, shapes, textures, production methods and, above all, in terms of the information that is now embedded in built systems.Among the 200 abstracts received in the first phase, 64 were selected for presentation in the conference and publication in the Electronic Proceedings, either as long or short papers, after 3 tough evaluation stages. Each paper was reviewed by at least three different experts from an international committee of more than 80 highly experienced researchers. The authors come from 23 different countries. Among all papers, 10 come from Latin-American institutions, which have been usually under-represented in CAAD Futures. The 33 highest rated long papers are also being published in a printed book by Springer. For this reason, only their abstracts were included in this Electronic Proceedings, at the end of each chapter.The papers in this book have been organized under the following topics: (1) modeling, analyzing and simulating the city, (2) sustainability and performance of the built environment, (3) automated and parametric design, (4) building information modeling (BIM), (5) fabrication and materiality, and (6) shape studies. The first topic includes papers describing different uses of computation applied to the study of the urban environment. The second one represents one of the most important current issues in the study and design of the built environment. The third topic, automated and parametric design, is an established field of research that is finally becoming more available to practitioners. Fabrication has been a hot topic in CAAD conferences, and is becoming ever more popular. This new way of making design and buildings will soon start affecting the way cities look like. Finally, shape studies are an established and respected field in design computing that is traditionally discussed in CAAD conferences.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	caadria2015_220
id	caadria2015_220
authors	Cheng, Nancy Y.; Mehrnoush Latifi Khorasgani, Nicholas Williams, Daniel Prohasky and Jane Burry
year	2015
title	Understanding Light in Building Skin Design
doi	https://doi.org/10.52842/conf.caadria.2015.323
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 323-332
summary	This paper describes a design approach for discerning solar gain and assigning appropriate external shading devices. The approach includes a macro analysis locating where and when the building receives direct sunlight and locating desired interior daylighting; along with a micro analysis of how folded sun-shading motifs filter or block direct sunlight. The approach uses a collaborative analytical workflow with feedback from virtual and physical simulations informing design explorations. This iterative, reciprocating process is illustrated by student efforts to design shading structures for a building based on incident solar radiation. Designers begin with cutting and folding paper study models, then lasercut 2D tessellation patterns to create sculptural shading screens to be examined with a heliodon. Physical daylighting modeling reveals aesthetic opportunities to develop with parametric design. Motifs are then digitally modeled and analysed for shading effectiveness. Analysing the solar radiation of simple motifs helps beginners learn the software for subsequent urban situations. The efficacy of these simulations is discussed along with ways that the results could be interpreted to initiate design decisions for a building skin.
keywords	Solar simulation; collaborative design; folding surfaces; physical and digital simulation.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	cf2015_090
id	cf2015_090
authors	Cordeiro, Artur Vasconcelos and Beiguelman, Giselle
year	2015
title	Smart city and Internet of Things: possible changes in the public space
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 90-98.
summary	This work aims to investigate the concept of smart city within the Internet of Things (IoT), and analyses possible transformations of urban space in areas of surveillance and control. As already seen regularly in the media, surveillance and control of data on the internet is a problem that affects personal freedom. If similar surveillance system is applied in the Internet of Things, where people, objects and environments are interconnected, exchanging a huge volume of data, the problem substantially increases due the possibility of more control over various aspects of people's lives. The purpose of this paper is to do a critical reflection about the consequences of the smart city regarding the public space and privacy of the inhabitants.
keywords	smart city, internet of things, public space, privacy
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	cf2015_135
id	cf2015_135
authors	Cuperschmid, Ana Regina M.; Ruschel, Regina C. and Monteiro, Ana Maria R. de G.
year	2015
title	Augmented Reality: Recognition of Multiple Models Simultaneously
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 135-154.
summary	The problem at hand is to ensure that the perception by means of Augmented Reality (AR) is hence reliable and opinions resulting from a Participatory Design (PD) mediated by this technology could be incorporated into the design solution. This paper presents the evaluation of multiple 3D models recognition in AR, with or without an auxiliary projection. Leisure area designs involve urban equipment of various dimensions that are visualized simultaneously. Therefore, it was necessary to verify if the participants were capable of recognizing them and which would be the best way to visualize: exclusively with the iPad screen or with the iPad associated with an external projection – to verify whether the visualization using an external projection would amplify the visualization area. The results obtained in the evaluation were used to improve the AR application and also, to develop guidelines for the AR use in a PD.
keywords	Augmented Reality, Recognition, User Experience Evaluation.
series	CAAD Futures
email
last changed	2015/06/29 07:55

For more results click below: