Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 589

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2015_92
id	ecaade2015_92
authors	Daher, Elie; Kubicki, Sylvain and Halin, Gilles
year	2015
title	A Parametric Process for Shelters and Refugees’ Camps Design
doi	https://doi.org/10.52842/conf.ecaade.2015.2.541
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 541-548
summary	Many situations related to natural environment and human activities increase the risk related to housing and create a demand for rapid post-disaster solutions. The solutions implemented by both the non-governmental organizations (NGOs) and the local and national organizations should fulfill the requirements of the temporarily displaced populations. However post-disaster design faces many challenges in its process making the response always more complex. At the same time, computer-based design is a growing approach in both architectural practice and research. The research described in this paper aims to help in finding solutions to design issues by addressing the potential of computer-based architectural design support. It is applied to shelter and camp development and takes into account physical, contextual and climatic parameters. The outcome is a design process for shelter and camp, which has been validated by a parametric prototype experiment in a case study. This should support humanitarian teams and contribute to enhancing the quality of design as well as to reducing the time required for the design and construction processes.
wos	WOS:000372316000061
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=02a874e6-6e90-11e5-8511-3bb4258a8962
last changed	2022/06/07 07:56

_id	acadia23_v3_71
id	acadia23_v3_71
authors	Vassigh, Shahin; Bogosian, Biayna
year	2023
title	Envisioning an Open Knowledge Network (OKN) for AEC Roboticists
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 3: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-1-0]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 24-32.
summary	The construction industry faces numerous challenges related to productivity, sustainability, and meeting global demands (Hatoum and Nassereddine 2020; Carra et al. 2018; Barbosa, Woetzel, and Mischke 2017; Bock 2015; Linner 2013). In response, the automation of design and construction has emerged as a promising solution. In the past three decades, researchers and innovators in the Architecture, Engineering, and Construction (AEC) fields have made significant strides in automating various aspects of building construction, utilizing computational design and robotic fabrication processes (Dubor et al. 2019). However, synthesizing innovation in automation encounters several obstacles. First, there is a lack of an established venue for information sharing, making it difficult to build upon the knowledge of peers. First, the absence of a well-established platform for information sharing hinders the ability to effectively capitalize on the knowledge of peers. Consequently, much of the research remains isolated, impeding the rapid dissemination of knowledge within the field (Mahbub 2015). Second, the absence of a standardized and unified process for automating design and construction leads to the individual development of standards, workflows, and terminologies. This lack of standardization presents a significant obstacle to research and learning within the field. Lastly, insufficient training materials hinder the acquisition of skills necessary to effectively utilize automation. Traditional in-person robotics training is resource-intensive, expensive, and designed for specific platforms (Peterson et al. 2021; Thomas 2013).
series	ACADIA
type	field note
email
last changed	2024/04/17 13:59

_id	caadria2015_010
id	caadria2015_010
authors	Gámez, Oscar; Jean-Claude Bignon and Gilles Duchanois
year	2015
title	Assisted Construction of Non-Standard Wooden Walls and Envelope Structures by Parametric Modeling
doi	https://doi.org/10.52842/conf.caadria.2015.653
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 653-662
summary	The non-standard approach, widely discussed in the past years as Architecture progressively uses alternative design methods different from the Euclidean paradigm, has allowed architects to transform the way architecture is conceived and materialized. Such evolution uses computer-aided design along with automation in production to originate the environment for the aided architectural conception field in which we present a method, in its early development stage, intended to create non-standard walls and envelopes based on cellular patterns using wood as base material. We present the results obtained from modeling and building two full-scale prototypes of non-standard wooden walls.
keywords	Non-standard walls; parametric modeling; CNC fabrication; cellular structures; wood construction.
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	cf2015_331
id	cf2015_331
authors	Brodeschi, Michal; Pilosof, Nirit Putievsky and Kalay, Yehuda E.
year	2015
title	The definition of semantic of spaces in virtual built environments oriented to BIM implementation
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 331-346.
summary	The BIM today can be a provider of inputs to performance analysis of different phenomena such as thermal comfort, energy consumption or winds. All these assessments are fundamental to the post occupation of the building. The attainment of approximate information of how the future building would behave under these conditions will reduce the waste of materials and energy resources. The same idea is used for evaluating the users occupation. Through simulation of human behavior is possible to evaluate which design elements can be improved. In complex structures such as hospital buildings or airports is quite complex for architects to determine optimal design solutions based on the tools available nowadays. These due to the fact users are not contemplated in the model. Part of the data used for the simulation can be derived from the BIM model. The three-dimensional model provides parametric information, however are not semantically enriched. They provide parameters to elements but not the connection between them, not the relationship. It means that during a simulation Virtual Users can recognize the elements represented in BIM models, but not what they mean, due to the lack of semantics. At the same time the built environment may assume different functions depending on the physical configuration or activities that are performed on it. The status of the space may reveal differences and these changes occur constantly and are dynamic. In an initial state, a room can be noisy and a moment later, quiet. This can determine what type of activities the space can support according to each change in status. In this study we demonstrate how the spaces can express different semantic information according to the activity performed on it. The aim of this paper is to simulate the activities carried out in the building and how they can generate different semantics to spaces according to the use given to it. Then we analyze the conditions to the implementation of this knowledge in the BIM model.
keywords	BIM, Virtual Sensitive Environments, Building Use Simulation, Semantics.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	acadia23_v1_220
id	acadia23_v1_220
authors	Ruan, Daniel; Adel, Arash
year	2023
title	Robotic Fabrication of Nail Laminated Timber: A Case Study Exhibition
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 220-225.
summary	Previous research projects (Adel, Agustynowicz, and Wehrle 2021; Adel Ahmadian 2020; Craney and Adel 2020; Adel et al. 2018; Apolinarska et al. 2016; Helm et al. 2017; Willmann et al. 2015; Oesterle 2009) have explored the use of comprehensive digital design-to-fabrication workflows for the construction of nonstandard timber structures employing robotic assembly technologies. More recently, the Robotically Fabricated Structure (RFS), a bespoke outdoor timber pavilion, demonstrated the potential for highly articulated timber architecture using short timber elements and human-robot collaborative assembly (HRCA) (Adel 2022). In the developed HRCA process, a human operator and a human fabricator work alongside industrial robotic arms in a shared working environment, enabling collaborative fabrication approaches. Building upon this research, we present an exploration adapting HRCA to nail-laminated timber (NLT) fabrication, demonstrated through a case study exhibition (Figures 1 and 2).
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	sigradi2015_sp_8.6
id	sigradi2015_sp_8.6
authors	Teixeira, Rafaela; Lopes, Jo?o V.; Paio, Alexandra; Guerreiro, Rosália
year	2015
title	Parametric modelling of walls: visual permeability to urbanity
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 786-791.
summary	Visually impermeable boundaries growth of residential multifamily buildings in Boa Viagem (Recife-BR) increases urban environment of buildings that ignore streets and pedestrians. Minimizing it, without disturbing the private use, this work consists in modelled walls defined by cobogós (typical hollow elements of the region), manipulated to guarantee some privacy and visual permeability at the same time. With Space Syntax tools and support, part of the neighborhood is analyzed both in its actual configuration, and after the post-supposed interventions. Analysis supported the design work decisions, making increase of visual range in public spaces possible, as a way of stimulate the urbanity.
keywords	Visual Permeability, Urbanity, Parametric Modelling, Space Syntax, Cobogó
series	SIGRADI
email
last changed	2016/03/10 10:01

_id	caadria2015_090
id	caadria2015_090
authors	Altabtabai, Jawad and Wei Yan
year	2015
title	A User Interface for Parametric Architectural Design Reviews
doi	https://doi.org/10.52842/conf.caadria.2015.065
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 65-74
summary	Architectural form and performance are affected by the designer's graphical representation methods. Parametric CAD systems, as design and representation tools, have become ubiquitous in architectural practice and education. Literature in the area of parametric design reviews is scarce and focused within building inspection and construction coordination domains. Additionally, platforms marketed as design review tools lack basic functionality for conducting comprehensive, parametric, and performance-based reviews. We have developed a user interface prototype where geometric and non-geometric information of a Building Information Model were translated into an interactive gaming environment. The interface allows simultaneous occupation and simulation of spatial geometry, enabling the user to engage with object parameters, as well as, performance-based, perspectival, diagrammatic, and orthographic representations for total spatial and performance comprehension.
keywords	Design cognition; Virtual/augmented reality and interactive environments; Human-computer interaction.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cf2015_485
id	cf2015_485
authors	Anaf, Márcia and Harris, Ana Lúcia Nogueira de Camargo
year	2015
title	The geometry of Chuck Hoberman as the basis for the development of dynamic experimental structures
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 485.
summary	The cognitive-theoretical foundation referring to teach drawing as a way of thinking, as well as the construction of the environment by means of drawing using transforming geometries and the formal and para-formal computational process, creating unusual geometries through generative design processes and methodologies, can be seen as some of the main possibilities in exploring dynamic experimental structures for an Adaptive Architecture. This article presents the development of a model for articulated facades, inspired by Hoberman´s Tessellates, and his Adaptive Building Initiative (ABI) project to develop facades models that respond in real time to environmental changes. In addition, we describe an experiment based on the retractable structures, inspired by Hoberman´s work and experimentations. Solutions for responsive facades can offer more flexible architectural solutions providing better use of natural light and contributing to saving energy. Using Rhinoceros and the Grasshopper for modeling and test the responsiveness, the parametric model was created to simulate geometric panels of hexagonal grids that would open and close in reaction to translational motion effects, regulating the amount of light that reaches the building.
keywords	Parametric architecture, Hoberman´s Tessellates, Adaptive Building Initiative (ABI), Articulated Facades, Complex Geometries, Retractable structures, Retractable polyhedra.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	ecaade2015_279
id	ecaade2015_279
authors	Baquero, Pablo, Giannopoulou, Effimia and Cavazos, Jaime
year	2015
title	Strategies for Metallic Vault Structures - Aluminium Composite Panels Used as Structural Elements
doi	https://doi.org/10.52842/conf.ecaade.2015.2.169
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 169-176
summary	This article explains parametric, fabrication and teaching strategies used during a workshop for constructing a full scale, self supporting, vault metal structure realized with parametric manufacturing methods. The key aim is to construct a small size, easy assembled and transportable pavilion, while focusing on new design and construction methods of a façade system in which the structure, joint and skin will integrate functions in a unifying structural system. For the investigation, we explore materials commonly used in façade industry, such as aluminum profiles and aluminium composite panels (ACP).
wos	WOS:000372316000021
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2015_3.111
id	sigradi2015_3.111
authors	Brand?o, Filipe; Paio, Alexandra; Sousa, José Pedro; Rato, Vasco
year	2015
title	Cork Re-Wall. Computational Methods of Automatic Generation and Digital Fabrication of Cork Partition Walls for Building Renovation
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 86-93.
summary	Developments in computational design methods and their integration with digital fabrication processes are ushering a customized fabrication paradigm. This paradigm is particularly suited to renovation of old buildings built with traditional construction techniques, a diversified corpus in which interventions are surgical and unique, and where partition walls play the central role. Insulation Cork Board and OSB, natural and renewable materials, can have an important role in a material system that responds to this context. Cork re-Wall is a parametrically modelled construction system and a file-to-factory digital process to generate high quality custom solutions to respond to diverse renovation design challenges.
keywords	Cork, Wood Frame, Digital Fabrication, Renovation, Parametric Design
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2015_317
id	ecaade2015_317
authors	Cavieres, Andres and Gentry, Russell
year	2015
title	Masonry Regions: A New Approach for the Representation of Masonry Walls in BIM Applications
doi	https://doi.org/10.52842/conf.ecaade.2015.1.585
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 585-595
summary	The article describes the theoretical approach for the development of computational representations of masonry walls based on the concept of regions. A masonry region is intended to support the description of various levels of detail pertaining to a masonry wall assembly, capturing the evolution and complexity of design information from early conceptual stages down to construction and operation. Since different wall types are characterized by a different set of domain-specific requirements, a special emphasis is put on a flexible strategy for classification of different types of view-dependent masonry regions. This classification will provide the foundation upon which masonry specific parametric modeling and rule-checking applications can be elaborated in the future. It will also provide the basis for the definition of model views necessary for particular data queries and exchanges between design stakeholders. The article introduces the concept of regions, and discusses its implications and future steps.
wos	WOS:000372317300063
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2015_185
id	caadria2015_185
authors	De Oliveira, Maria João and Vasco Moreira Rato
year	2015
title	From Morphogenetic Data to Performative Behaviour
doi	https://doi.org/10.52842/conf.caadria.2015.765
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 765-774
summary	This paper presents part of CORK’EWS, a research work developed within the framework of the Digital Architecture Advanced Program 2012/13 at ISCTE-IUL. The main goal of this investigation was to develop a parametric, customizable and adaptive wall system designed for environmental performance. Moreover, the system is based on standard industrial products: expanded cork blocks produced by Amorim Insulation industries. CAD/CAM resources were the essential tools of the research process, where fundamental and practical knowledge is integrated to understand the microstructure morphological properties of the raw material – cork – and its derivate – natural expanded cork. These properties were upscale and adapted to create a wall with an optimized solar control environmental performance. The result is a digitally fabricated prototype of a new customizable industrial product, adaptable to specific environmental conditions and installation setups being therefore easily commercialized. From microstructural morphology to macroscale construction, the research explores new application possibilities through morphogenesis and opens new possible markets for these customizable products.
keywords	Morphogenesis; performance; shading systems; cork.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	cf2015_328
id	cf2015_328
authors	Gamez, Oscar; Bignon, Jean-Claude and Duchanois, Gilles
year	2015
title	Assisted construction of non-standard wooden walls and envelope structures by parametric modeling
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 328.
summary	We introduce a parametric modeling method in the field of computer-aided architectural conception, which aims to produce non-standard wooden walls and envelopes with CNC machinery. This method explores the application of polygonal cellular structures (as patterns) on facade and envelope interventions for new and old projects. We innovate by bringing the 3D production environment complexity into the conception model to improve the production of manifold woodworking items by CNC (Computer Numerical Control) 3D fabrication. A recent experimentation, tests the entire workflow from parametric modeling to production of two full-scale prototypes. The results prove the range of inputs offered by the method to be functional, though it needs various improvements in order to optimize parametric modeling and digital fabrication procedures. Future research will focus on treating a wider range of joints via parametric modeling and deal with joint creation regardless wall deformation to expand the morphological approach of non-standard wooden walls design.
keywords	Non-standard walls, Computer-aided architectural design, Wood construction, Parametric modeling, CNC fabrication, Mass customization.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	cf2015_324
id	cf2015_324
authors	Gerber, David Jason; Pantazis, Evangelos and Marcolino, Leandro Soriano
year	2015
title	Design Agency: Prototyping Multi-Agent Systems in Architecture
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 324.
summary	This paper presents research on the prototyping of multi-agent systems for architectural design. It proposes a design exploration methodology at the intersection of architecture, engineering, and computer science. The motivation of the work includes exploring bottom up generative methods coupled with optimizing performance criteria including for geometric complexity and objective functions for environmental, structural and fabrication parameters. The paper presents the development of a research framework and initial experiments to provide design solutions, which simultaneously satisfy complexly coupled and often contradicting objectives. The prototypical experiments and initial algorithms are described through a set of different design cases and agents within this framework; for the generation of façade panels for light control; for emergent design of shell structures; for actual construction of reciprocal frames; and for robotic fabrication. Initial results include multi-agent derived efficiencies for environmental and fabrication criteria and discussion of future steps for inclusion of human and structural factors.
keywords	Generative Design, Parametric Design, Multi-Agent Systems, Digital Fabrication, Form Finding, Reciprocal Frames.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	caadria2016_787
id	caadria2016_787
authors	Knapp, Chris; Jonathan Nelson, Andrew Kudless and Sascha Bohnenberger
year	2016
title	Lightweight material prototypes using dense bundled systems to emulate an ambient environment
doi	https://doi.org/10.52842/conf.caadria.2016.787
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 787-796
summary	This paper describes and reflects upon a computational de- sign and digital fabrication research project that was developed and implemented over 2014-2015, with subsequent development continu- ing for applications at present. The aim of the research was to develop methods of modelling, analysis, and fabrication that facilitate integra- tive approaches to architectural design and construction. In this con- text, the development of material prototypes, digital simulations, and parametric frameworks were pursued in parallel in order to inform and reform successive iterations throughout the process, leading to a re- fined workflow for engineering, production, and speculation upon fu- ture directions of the work.
keywords	Digital fabrication; biomimicry; ambient environments; grasshopper; computational design
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	cf2015_347
id	cf2015_347
authors	Krakhofer, Stefan
year	2015
title	Closing the Loop: From Analysis to Transformation within BIM
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 347-357.
summary	The shift from traditional CAD to BIM has created a significant potential to embed optimization processes in many stages of the design. The presented research is situated in the early design stage of inception and concept, focusing on analysis-driven-form-finding during the integrated design approach within a BIM environment. A custom analysis framework, has been developed and linked to a visual programming environment that allows the exchange of data with the parametric components of a BIM environment. The developed workflow and sequential split of functionalities enables a shared design environment for multiple experts and the design-team. The environment is intended to close the loop from analysis to parametric modeling in order to generate and evaluate building designs against performance criteria, with the aim to expedite the design decision process. The prototype has been presented to participants of the Deep-Space Cluster at SmartGeometry 2014.
keywords	Algorithmic Design, Parametric Design, Parametric Analysis, Building Information Modeling, Design Automation.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	sigradi2015_8.77
id	sigradi2015_8.77
authors	López, Juan Camilo Isaza; Alvarado, Rodrigo García; Siade, Iván Cartes
year	2015
title	Integrated modeling of residential complexes with high hydric performance
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 328-335.
summary	One of the most important natural resources for the urban sustainability is water. For this reason, the incorporation of appropriate strategies to manage water resources from buildings and urban planning is necessary. In this work a series of parametric criteria are defined, with which by using design software it proposed generating optimal forms in certain scenarios for high hydric performance in urban residential complexes. The examples developed demonstrates strong influences of dwelling density by the construction block and permeable outdoor surfaces, as well as local infrastructure for water recovering.
keywords	Parametric Modeling, Hydric Performance, Water Use, Sustainable Neighborhoods
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2023_416
id	sigradi2023_416
authors	Machado Fagundes, Cristian Vinicius, Miotto Bruscato, Léia, Paiva Ponzio, Angelica and Chornobai, Sara Regiane
year	2023
title	Parametric environment for internalization and classification of models generated by the Shap-E tool
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1689–1698
summary	Computing has been increasingly employed in design environments, primarily to perform calculations and logical decisions faster than humans could, enabling tasks that would be impossible or too time-consuming to execute manually. Various studies highlight the use of digital tools and technologies in diverse methods, such as parametric modeling and evolutionary algorithms, for exploring and optimizing alternatives in architecture, design, and engineering (Martino, 2015; Fagundes, 2019). Currently, there is a growing emergence of intelligent models that increasingly integrate computers into the design process. Demonstrating great potential for initial ideation, artificial intelligence (AI) models like Shap-E (Nichol et al., 2023) by OpenAI stand out. Although this model falls short of state-of-the-art sample quality, it is among the most efficient orders of magnitude for generating three-dimensional models through AI interfaces, offering practical balance for certain use cases. Thus, aiming to explore this gap, the presented study proposes an innovative design agency framework by employing Shap-E connected with parametric modeling in the design process. The generation tool has shown promising results; through generations of synthetic views conditioned by text captions, its final output is a mesh. However, due to the lack of topological information in models generated by Shap-E, we propose to fill this gap by transferring data to a parametric three-dimensional surface modeling environment. Consequently, this interaction's use aims to enable the transformation of the mesh into quantifiable surfaces, subject to collection and optimization of dimensional data of objects. Moreover, this work seeks to enable the creation of artificial databases through formal categorization of parameterized outputs using the K-means algorithm. For this purpose, the study methodologically orients itself in a four-step exploratory experimental process: (1) creation of models generated by Shap-E in a pressing manner; (2) use of parametric modeling to internalize models into the Grasshopper environment; (3) generation of optimized alternatives using the evolutionary algorithm (Biomorpher); (4) and classification of models using the K-means algorithm. Thus, the presented study proposes, through an environment of internalization and classification of models generated by the Shap-E tool, to contribute to the construction of a new design agency methodology in the decision-making process of design. So far, this research has resulted in the generation and classification of a diverse set of three-dimensional shapes. These shapes are grouped for potential applications in machine learning, in addition to providing insights for the refinement and detailed exploration of forms.
keywords	Shap-E, Parametric Design, Evolutionary Algorithm, Synthetic Database, Artificial Intelligence
series	SIGraDi
email
last changed	2024/03/08 14:09

_id	ecaade2015_109
id	ecaade2015_109
authors	Markusiewicz, Jacek, Strzala, Marcin and Koszewski, Krzysztof
year	2015
title	Modular Light Cloud. Design, Programming and Making - Towards the Integration of Creative Actions
doi	https://doi.org/10.52842/conf.ecaade.2015.2.091
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 91-101
summary	Modular Light Cloud is an installation that is conceived to explore the boundaries of architecture and art. Its interactivity is a metaphor of mutual influences that derive from activities performed in space - associated with motion, sound and light.It is an experimental project focused on the integration of architectural elements, structure, information technology, performing arts, electronics and digital fabrication in architectural education.The project was completed in a two-week student workshop in collaboration with a contemporary dance artist. The students were taught the basics of parametric design, programming of electronic components and digital fabrication during tutorial classes. The making process combined three stages of development: design, construction and programming of interaction.The final form consists of two irregular spatial trusses made of aluminum profiles connected with 3d printed nodes. The profiles are equipped with LED strips and electronic components: light sensors, sound and communication between them. These systems control the intensity of light emitted by the diodes based on the inputs.The result is a working prototype presented as interactive installation featuring contemporary dance artist. It was displayed at art festivals and other events.
wos	WOS:000372316000012
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=e17b2300-6f83-11e5-836f-4becdc2939a0
last changed	2022/06/07 07:59

_id	cf2015_447
id	cf2015_447
authors	Meyer, J.; Duchanois, G. and Bignon, J.C.
year	2015
title	Analysis and validation of the digital chain relating to architectural design process: Achievement of a folded structure composed of wood panels
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 447-459.
summary	The research presented in this paper revolves around the experimental development of the morpho-structural potential of folded architectural structures made of wood. The aims are to develop an innovative system for timber used in sustainable construction and to increase the inventory of wood architectural tectonics. First, this article provides a characterization of the digital chain associated to the development of non-standard folded structures consisting of wood panels. The purpose is to study the architectural design process from parametric modeling (through CNC machining) and assembly operations to production by way of a full-scale experimental pavilion. Secondly, a number of analytical experiments have been performed towards the completion of the pavilion, in order to validate the design process.
keywords	Architecture, folded structure, robotic fabrication, computational design, parametric modeling, wood panels
series	CAAD Futures
email
last changed	2015/06/29 07:55

For more results click below: