Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 589

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2015_92
id	ecaade2015_92
authors	Daher, Elie; Kubicki, Sylvain and Halin, Gilles
year	2015
title	A Parametric Process for Shelters and Refugees’ Camps Design
doi	https://doi.org/10.52842/conf.ecaade.2015.2.541
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 541-548
summary	Many situations related to natural environment and human activities increase the risk related to housing and create a demand for rapid post-disaster solutions. The solutions implemented by both the non-governmental organizations (NGOs) and the local and national organizations should fulfill the requirements of the temporarily displaced populations. However post-disaster design faces many challenges in its process making the response always more complex. At the same time, computer-based design is a growing approach in both architectural practice and research. The research described in this paper aims to help in finding solutions to design issues by addressing the potential of computer-based architectural design support. It is applied to shelter and camp development and takes into account physical, contextual and climatic parameters. The outcome is a design process for shelter and camp, which has been validated by a parametric prototype experiment in a case study. This should support humanitarian teams and contribute to enhancing the quality of design as well as to reducing the time required for the design and construction processes.
wos	WOS:000372316000061
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=02a874e6-6e90-11e5-8511-3bb4258a8962
last changed	2022/06/07 07:56

_id	acadia19_168
id	acadia19_168
authors	Adilenidou, Yota; Ahmed, Zeeshan Yunus; Freek, Bos; Colletti, Marjan
year	2019
title	Unprintable Forms
doi	https://doi.org/10.52842/conf.acadia.2019.168
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp.168-177
summary	This paper presents a 3D Concrete Printing (3DCP) experiment at the full scale of virtualarchitectural bodies developed through a computational technique based on the use of Cellular Automata (CA). The theoretical concept behind this technique is the decoding of errors in form generation and the invention of a process that would recreate the errors as a response to optimization (Adilenidou 2015). The generative design process established a family of structural and formal elements whose proliferation is guided through sets of differential grids (multi-grids) leading to the build-up of large span structures and edifices, for example, a cathedral. This tooling system is capable of producing, with specific inputs, a large number of outcomes in different scales. However, the resulting virtual surfaces could be considered as "unprintable" either due to their need of extra support or due to the presence of many cavities in the surface topology. The above characteristics could be categorized as errors, malfunctions, or undesired details in the geometry of a form that would need to be eliminated to prepare it for printing. This research project attempts to transform these "fabrication imprecisions" through new 3DCP techniques into factors of robustness of the resulting structure. The process includes the elimination of the detail / "errors" of the surface and their later reinsertion as structural folds that would strengthen the assembly. Through this process, the tangible outputs achieved fulfill design and functional requirements without compromising their structural integrity due to the manufacturing constraints.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia15_263
id	acadia15_263
authors	Ahlquist, Sean
year	2015
title	Social Sensory Architectures: Articulating Textile Hybrid Structures for Multi-Sensory Responsiveness and Collaborative Play
doi	https://doi.org/10.52842/conf.acadia.2015.263
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 263-273
summary	This paper describes the development of the StretchPLAY prototype as a part of the Social Sensory Surfaces research project, focusing on the design of tactile and responsive environments for children with Autism Spectrum Disorder (ASD). The project is directed specifically at issues with sensory processing, the inability of the nervous system to filter sensory input in order to indicate an appropriate response. This can be referred to as a “traffic jam” of sensory data where the intensity of such unfiltered information leads to an over-intensified sensory experience, and ultimately a dis-regulated state. To create a sensory regulating environments, a tactile structure is developed integrating physical, visual and auditory feedback. The structure is defined as a textile hybrid system integrating a seamless knitted textile to form a continuous topologically complex surface. Advancements in the fabrication of the boundary structure, of glass-fiber reinforced rods, enable the form to be more robustly structured than previous examples of textile hybrid or tent-like structures. The tensioned textile is activated as a tangible interface where sensing of touch and pressure on the surface triggers ranges of visual and auditory response. A specific child, a five-year old girl with ASD, is studied in order to tailor the technologies as a response to her sensory challenges. This project is a collaboration with students, researchers and faculty in the fields of architecture, computer science, information (human-computer interaction), music and civil engineering, along with practitioners in the field of ASD-based therapies.
keywords	Textile Hybrid, Knitting, Sensory Environment, Tangible Interface, Responsive systems and environments
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia15_123
id	acadia15_123
authors	Askarinejad, Ali; Chaaraoui, Rizkallah
year	2015
title	Spatial Nets: the Computational and Material Study of Reticular Geometries
doi	https://doi.org/10.52842/conf.acadia.2015.123
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 123-135
summary	Reticular systems are in many aspects a distinct taxonomy of volumetric geometries. In comparison with the conventional embodiment of a ‘volume’ that encapsulates a certain quantity of space with a shell reticular geometries emerge from the accumulation of micro elements to define a gradient of space. Observed in biological systems, such structures result from their material properties and formation processes as well as often ‘simple’ axioms that produce complex results. In micro or macro levels, from forest tree canopies to plant cell walls these porous volumes are not shaped to have a singular ‘solution’ for a purpose; they provide the fundamental geometric characteristics of a ‘line cloud’ that is simultaneously flexible in response to its environment, porous to other systems (light, air, liquids) and less susceptible to critical damage. The porosity of such systems and their volumetric depth also result in kinetic spatial qualities in a 4D architectural space. Built upon a ‘weaving’ organization and the high performance material properties of carbon fiber composite, this research focuses on a formal grammar that initiates the complex system of a reticular volume. A finite ‘lexical’ axiom is consisted of the basic characters of H, M and L responding to the anchor points on the highest, medium and lower levels of the extruding loom. The genome thus produces a string of data that in the second phase of programming are assigned to 624 points on the loom. The code aims to distribute the nodes across the flat line cloud and organize the sequence for the purpose of overlapping the tensioned strings. The virtually infinite results are then assessed through an evolutionary solver for confining an array of favorable results that can be then selected from by the designer. This research focuses on an approximate control over the fundamental geometric characteristics of a reticular system such as node density and directionality. The proposal frames the favorable result of the weave to be three-dimensional and volumetric – avoiding distinctly linear or surface formations.
keywords	Reticular Geometries, Weaving, Line Clouds, Three-dimensional Form-finding, Carbon fiber, Prepreg composite, Volumetric loom, Fiberous Materials, Weaving fabrication, Formal Language, Lexical design, Evolutionary solver
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2017_031
id	caadria2017_031
authors	Crolla, Kristof, Williams, Nicholas, Muehlbauer, Manuel and Burry, Jane
year	2017
title	SmartNodes Pavilion - Towards Custom-optimized Nodes Applications in Construction
doi	https://doi.org/10.52842/conf.caadria.2017.467
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 467-476
summary	Recent developments in Additive Manufacturing are creating possibilities to make not only rapid prototypes, but directly manufactured customised components. This paper investigates the potential for combining standard building materials with customised nodes that are individually optimised in response to local load conditions in non-standard, irregular, or doubly curved frame structures. This research iteration uses as a vehicle for investigation the SmartNodes Pavilion, a temporary structure with 3D printed nodes built for the 2015 Bi-City Biennale of Urbanism/Architecture in Hong Kong. The pavilion is the most recent staged output of the SmartNodes Project. It builds on the findings in earlier iterations by introducing topologically constrained node forms that marry the principals of the evolved optimised node shape with topological constraints imposed to meet the printing challenges. The 4m high canopy scale prototype structure in this early design research iteration represents the node forms using plastic Fused Deposition Modelling (FDM).
keywords	Digital Fabrication; Additive Manufacturing; File to Factory; Design Optimisation; 3D printing for construction
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	acadia23_v3_19
id	acadia23_v3_19
authors	Dickey, Rachel
year	2023
title	Material Interfaces
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 3: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-1-0]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 24-32.
summary	Based on our current daily rate, 85,410 hours is the average amount of time that an adult in the United States will spend on their phone in a lifetime (Howarth 2023). This is time spent texting, tweeting, emailing, snapping, chatting, posting, and interacting with an interface which each of us carry in our pocket. Kelly Dobson explains, “We psychologically view the cell phone as an extension of our bodies, which is why when you accidentally forget it or leave it behind you feel you have lost apart of yourself” (2013). In reality, this device is just one of many technologies which affect our relationship with our bodies and the physical world. Additionally, Zoom meetings, social media networks, on-line shopping, and delivery robots, all increasingly detach our bodies and our senses from our everyday experiences and interactions. In response to digital culture, Liam Young writes, “Perhaps the day will come when we turn off our target ads, navigational prompts, Tinder match notifications, and status updates to find a world stripped bare, where nothing is left but scaffolds and screens” (2015). Make no mistake; the collection of projects shared in these field notes is intended to be a counterpoint to such a prophesied future. However, the intent is not to try to compete with technology, but rather, to consider the built environment itself as an interface, encouraging interaction through feedback and responsivity directly related to human factors, finding ways to re-engage the body through design.
series	ACADIA
type	field note
email
last changed	2024/04/17 13:59

_id	ecaade2015_61
id	ecaade2015_61
authors	Foged, Isak Worre and Pasold, Anke
year	2015
title	Development of a Method and Model for Programming Material Behaviour in a Responsive Envelope
doi	https://doi.org/10.52842/conf.ecaade.2015.2.449
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 449-458
summary	The research presents an architectural method and model that organise material composites into weather-powered response building envelopes. The work is done through a set of simulation strategies including simulation of thermal sensation, simulation of material behaviours of a developed dynamic architectural envelope based on bi-material deflection and simulation of a design process based on evolutionary computation. The work finds that the proposed method and model can create dynamic expressive and environment-oriented functional building envelopes. The approach allow time-based articulation and making of architectures that respond to the thermal environment, thereby creating a basis for developing buildings that are intimately linked to dynamic environmental and human occupancy patterns.
wos	WOS:000372316000051
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=e70e19e4-70d7-11e5-9c6a-d7a061db2d21
last changed	2022/06/07 07:51

_id	ecaade2015_247
id	ecaade2015_247
authors	Garcia, Manuel Jimenez and Retsin, Gilles
year	2015
title	Design Methods for Large Scale Printing
doi	https://doi.org/10.52842/conf.ecaade.2015.2.331
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 331-339
summary	With an exponential increase in the possibilities of computation and computer-controlled fabrication, high density information is becoming a reality in digital design and architecture. However, construction methods and industrial fabrication processes have not yet been reshaped to accommodate the recent changes in those disciplines. Although it is possible to build up complex simulations with millions of particles, the simulation is often disconnected from the actual fabrication process. Our research proposes a bridge between both stages, where one drives the other, producing a smooth transition from design to production. A particle in the digital domain becomes a drop of material in the construction method.The architect's medium of expression has become much more than a representational tool in the last century, and more recently it has evolved even beyond a series of rules to drive from design to production. The design system is the instruction itself; embedding structure, material and tectonics and gets delivered to the very end of the construction chain, where it gets materialised. The research showcased in this paper investigates tectonic systems associated with large scale 3D printing and additive manufacturing methods, inheriting both material properties and fabrication constraints at all stages from design to production. Computational models and custom design software packages are designed and developed as strategies to organise material in space in response to specific structural and logistical input.Although the research has developed a wide spectrum of 3D printing methods, this paper focuses only on two of the most recent projects, where different material and computational logics were investigated. The first, titled Filamentrics, intends to develop free-form space frames, overcoming their homogeneity by introducing robotic plastic extrusion. Through the use of custom made extruders a vast range of high resolution prototypes were developed, evolving the design process towards the fabrication of precise structures that can be materialised using additive manufacturing but without the use of a layered 3D printing method. Instead, material limitations were studied and embedded in custom algorithms that allow depositing material in the air for internal connectivity. The final result is a 3x2x2.5m structure that demonstrates the viability of this construction method for being implemented in more industrial scenarios.While Filamentrics is reshaping the way we could design and build light weight structures, the second project Microstrata aims to establish new construction methods for compression based materials. A layering 3D printing method combines both the deposition of the binder and the distribution of an interconnected network of capillaries. These capillaries are organised following structural principles, configuring a series of channels which are left empty within the mass. In a second stage aluminium is cast in this hollow space to build a continuous tension reinforcement.
wos	WOS:000372316000039
series	eCAADe
type	normal paper
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=07a6d8e0-6fe7-11e5-9994-cb14cd908012
last changed	2022/06/07 07:51

_id	sigradi2015_11.136
id	sigradi2015_11.136
authors	Gomes, Ana Catarina Costa; Paio, Alexandra
year	2015
title	Generative Solutions: Adaptation and Flexibilization in Housing as a Qualified Social Response
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 642-648.
summary	Housing for all is back on the international agenda. The economic crisis forces researchers and architects to rethink the concept of living and adopt more flexible housing design strategies as an alternative to typologies that impose rules of coexistence and do not reflect the social dynamics of a community. The introduction of rules-based housing design strategies allows the implementation of more dynamic processes. This ongoing research is a reflection on the potential of digital tools to develop spatial and formal parameters based on analysis of flexible housing models. This paper presents the initial phase of the research.
keywords	Adaptive and Evolutionary Housing, Social Dynamics, Digital Tools
series	SIGRADI
email
last changed	2016/03/10 09:52

_id	sigradi2016_621
id	sigradi2016_621
authors	Gomes, Maria Cecília Rocha Couto; Santos, Ana Paula Baltazar dos; Arruda, Guilherme Ferreira de; Cabral Filho , José dos Santos; Silva, Luís Henrique Marques de Oliveira; Diniz, Luiza Encarnaç?o; Lima, Mariana Julia Souza Barbosa; Stralen, Mateus de Sousa van
year	2016
title	Parametrizaç?o para além do processo de projeto: experimentando aberturas para interaç?o [Parametrization beyond the design process: trying out openness for interaction]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.790-794
summary	This paper discusses the use of parametrization and digital fabrication in architecture proposing a shift from increasing the architect’s control over the final product (determinist paradigm), towards increasing users' interaction. It presents the design process of an experimental interactive object intended to meet the former discussion and test the limits and difficulties that might arise during the process. Such an object was developed by Lagear (UFMG), as a response to the exhibition Homo Faber: Digital Fabrication in Latin America, CAAD FUTURES 2015.
keywords	Interactive object; Parametrization; Digital Fabrication; Representation; Interaction
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2015_327
id	ecaade2015_327
authors	Hansen, Kai and McLeish, Thomas
year	2015
title	Designing Real Time Sense and Response Environments through UX Research
doi	https://doi.org/10.52842/conf.ecaade.2015.2.651
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 651-658
summary	Ubiquitous computing systems are changing the way retail environments are being designed. With increasing frequency, User Experience (UX) designers leveraging ubiquitous computing systems that observe and respond to user behaviors are assuming roles once held exclusively by architects. As these systems continue to spread, space designers will need to embrace UX research and design methods. We will discuss how ubiquitous computing is leveraged in our research, and our position on how these systems are impacting the design of retail environments, illustrated by several examples of UX research projects informing the design of retail environments.
wos	WOS:000372316000072
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=b0f3e516-6e91-11e5-800a-00190f04dc4c
last changed	2022/06/07 07:50

_id	caadria2015_054
id	caadria2015_054
authors	Joseph, Daniel; Alan Kim, Andrew Butler and M. Hank Haeusler
year	2015
title	Optimisation for Sport Stadium Designs
doi	https://doi.org/10.52842/conf.caadria.2015.573
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 573-582
summary	Applying computational optimisation tools for sport stadium designs has become common practice. However, optimizations often occur only on a macro level (analysing stadium as a whole) and not on a micro level (a view from each seat). Consequently, items on a micro level with design details like guardrails can be overlooked, leading to financial losses for operators. Hence, the research argues that every seat is encouraged to have a clear field of view to avoid financial complications. In order to address this problem the research team developed and evaluated a script that allowed importing an existing design into Rhino. Firstly, the script evaluates the view of each seat via a colour coded response system. Secondly, the designer can select the respective seat, and view the sightline from the occupant’s sightline to various spots on the field to analyse where the obstruction is occurring. This ‘binocular view’ enables the designer to evaluate blind spots from each seat prior to project completion. As the script allows the designer to automate the micro level analysis, the research arguably provides a significant improvement for stadium design by comparing the time used for a design optimisation in a conventional method with the automated one.
keywords	Stadium design; Design optimisation; Design analysis; Customised software development; Grasshopper scripting.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2015_84
id	ecaade2015_84
authors	Kontovourkis, Odysseas and Tryfonos, George
year	2015
title	Robotic Fabrication of Tensile Mesh Structures and Real Time Response - The Development and Simulation of a Custom-Made End Effector Tool
doi	https://doi.org/10.52842/conf.ecaade.2015.2.389
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 389-398
summary	This paper presents an ongoing research, aiming to introduce a fabrication procedure for the development of tensile mesh systems. The purpose of this methodology is to be implemented in real time, based on a feedback loop logic cyclically iterated between robotic machine control and elastic material behaviour. Our purpose is to extend the capacity of robotically driven mechanisms to the fabrication of complex tensile structures and at the same time, reduce the defects that might occur due to the deformation of the elastic material. In this paper, emphasis is given to the development of a custom-made end effector tool, which is responsible to add elastic threads and create connections in the form of nodes. Based on additive fabrication logic, this process suggests the real time development of physical prototypes through the increasing smoothness of mesh structures.
wos	WOS:000372316000045
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2015_139
id	ecaade2015_139
authors	Krietemeyer, Bess and Rogler, Kurt
year	2015
title	Real-Time Multi-Zone Building Performance Impacts of Occupant Interaction with Dynamic Façade Systems
doi	https://doi.org/10.52842/conf.ecaade.2015.2.669
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 669-678
summary	Recent developments in responsive electroactive materials are increasing the rate at which next-generation façade technologies can respond to environmental conditions, building energy demands, and the actions of building occupants. Simulating the real-time performance of dynamic façade systems is critical for understanding the impacts that occupant response will have on whole-building energy performance and architectural design. This paper describes a method for real-time analysis of the multi-zone building performance impacts of occupant interaction with a dynamic façade system, the Electroactive Dynamic Display System (EDDS). The objective is to optimize EDDS implementation and define system limitations, incorporate EDDS as a dynamic factor in multi-zone building energy analyses, and provide real-time feedback of building performance data based on environmental conditions and occupant interactions. Preliminary results of parametric simulation methods demonstrate the ability of dynamic façade systems to consider real-time occupant interaction in the analysis of daylighting and thermal performance of buildings.
wos	WOS:000372316000074
series	eCAADe
email
last changed	2022/06/07 07:51

_id	cf2015_239
id	cf2015_239
authors	Maia, Sara Costa and Meyboom, AnnaLisa
year	2015
title	Interrogating interactive and responsive architecture: The quest of a technological solution looking for an architectural problem
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 239.
summary	Interactive Architecture and Responsive Architecture are provocative fields of investigation and have potentially disruptive and far reaching effects for architecture. However it can be argued that these fields haven’t been developed as a direct response to previously identified architectural demands. Instead, they have risen as consequence of new technology availability, with ad hoc discussions in the context of the built environment. In order to test this hypothesis, 229 publications were examined and narrowed down to 77 papers and 41 design projects, which were systematically analyzed. The primary objective of this investigation is to understand Interactive Architecture’s development with regard to justification. This understanding provides us with the basis to speculate on the possibly expanding introduction of extraneous technological solutions to the discipline of architecture. The research findings indicate a mismatch between theoretical discourse and projects being developed in those fields. They also describe the current state of Interactive Architecture research.
keywords	Interactive Architecture, Responsive Architecture, Literature Analysis, Design Projects Analysis.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	acadia15_343
id	acadia15_343
authors	Roudavski, Stanislav
year	2015
title	Sketching with Robots
doi	https://doi.org/10.52842/conf.acadia.2015.343
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 343-355
summary	Today, human activities constitute the primary environmental impact on the planet. In this context, commitments to sustainability, or minimization of damage, prove insufficient. To develop regenerative, futuring capabilities, architectural design needs to extend beyond the form and function of things and engage with the management of complex systems. Such systems involve multiple types of dynamic phenomena – biotic and abiotic, technical and cultural – and can be understood as living. Engagement with such living systems implies manipulation of pervasive and unceasing change, irrespective of whether it is accepted by design stakeholders or actively managed towards homeostatic or homeorhetic conditions. On one hand, such manipulation of continuity requires holistic and persistent design involvements that are beyond natural capabilities of human designers. On the other hand, practical, political or creative implications of reliance on automated systems capable of tackling such tasks is as yet underexplored. In response to this challenge, this paper considers an experimental approach that utilised methods of critical making and speculative designing to explore potentials of autonomous architecture. This approach combined 1) knowledge of animal architecture that served as a lens for rethinking human construction and as a source of alternative design approaches; 2) practices of creative computing that supported speculative applications of data-driven and performance-oriented design; and 3) techniques of robotics and mechatronics that produced working prototypes of autonomous devices that served as props for critical thinking about alternative futures.
keywords	Intelligent robots, animal architecture, synthetic ecology
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	ecaade2015_286
id	ecaade2015_286
authors	Safarova, Bara; Ledesma, Edna, Luhan, Gregory, Caffey, Stephen and Giusti, Cecilia
year	2015
title	Learning from Collaborative Integration:The Hackathon as Design Charrette
doi	https://doi.org/10.52842/conf.ecaade.2015.2.233
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 233-240
summary	This paper examines the application of innovative and interdisciplinary collaboration methods that emerged from the rapidly developing field of information technology and its intersection within the realm of design and architecture. These events, also referred to as hackathons, have risen in popularity in recent years (Artiles & Wallace, 2013) and stem from a design response for the increasing demand for accelerated design decisions within the field of architecture. This paper examines the potential of hackathons as a platform for rapid development of design ideas into prototypes within a time constraint of 24 hours. The paper explores the hackathon as a robust foundational element for pedagogical approaches rooted in interdisciplinary collaboration. Using a case-study research methodology, this paper probes the framework of the event, the outcomes, and the lessons learned. As this paper demonstrates, the hackathon required participants to identify and explore shifting territories through interdisciplinary teamwork to arrive at innovative solutions. In this setting, the format of the hackathon serves as a vibrant territory that enables a concrete theoretical contribution to design pedagogy, CAAD education, and collaborative professional practice.
wos	WOS:000372316000028
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=499d55fa-6e91-11e5-ae6e-00190f04dc4c
last changed	2022/06/07 07:56

_id	caadria2015_002
id	caadria2015_002
authors	Tomasowa, Riva
year	2015
title	BIM Design Collaboration Report
doi	https://doi.org/10.52842/conf.caadria.2015.387
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 387-395
summary	The discourse to mould Building Information Modelling (BIM) into the early architecture education has been escalated in many scholar papers and discussions. Scenarios are made to obtain optimum educational deliverance. However, the response from students’ perspective to the outlined subject has not been reviewed in terms of their competences, especially in Indonesian higher education where architectural computing education is relatively new. After BIM is delivered in two semesters span in the early stage at Bina Nusantara University, Faculty of Engineering, Architecture Department, survey is conducted to depict their understanding. This article is the feedback report, which shows that the students were self-convinced to the potential of BIM and its future. In achieving that particular level, the combination of various delivery methods is the utmost strategy to accompany the design studio with BIM.
keywords	BIM; collaboration; role-play; education
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	acadia15_297
id	acadia15_297
authors	Vasey, Lauren; Baharlou, Ehsan; Dörstelmann, Moritz; Koslowski; Marshall Prado, Valentin; Schieber, Gundula; Menges, Achim; Knippers, Jan
year	2015
title	Behavioral Design and Adaptive Robotic Fabrication of a Fiber Composite Compression Shell with Pneumatic Formwork
doi	https://doi.org/10.52842/conf.acadia.2015.297
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 297-309
summary	This paper presents the production and development of an adaptive robotically fabricated ber composite compression shell with pneumatic formwork as a case study for investigating a generative behavioral design model and an adaptive, online mode of production. The project builds off of previous research at the University of Stuttgart on lightweight ber composite structures which attempts to reduce the necessary formwork for fabrication while simultaneously incorporating structural, material and fabrication logics into an integrative computational design tool. This paper discusses the design development and fabrication work ow of the project, as well a set of strategies which were developed for online robotic programming in response to live sensor data.
keywords	Behavioral Fabrication, Behavioral Robotics, Agent Based Computation, Online Control, Biomimetics, Pneumatics, Signal Processing, Fibre Based Composites
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:58

_id	acadia23_v3_71
id	acadia23_v3_71
authors	Vassigh, Shahin; Bogosian, Biayna
year	2023
title	Envisioning an Open Knowledge Network (OKN) for AEC Roboticists
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 3: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-1-0]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 24-32.
summary	The construction industry faces numerous challenges related to productivity, sustainability, and meeting global demands (Hatoum and Nassereddine 2020; Carra et al. 2018; Barbosa, Woetzel, and Mischke 2017; Bock 2015; Linner 2013). In response, the automation of design and construction has emerged as a promising solution. In the past three decades, researchers and innovators in the Architecture, Engineering, and Construction (AEC) fields have made significant strides in automating various aspects of building construction, utilizing computational design and robotic fabrication processes (Dubor et al. 2019). However, synthesizing innovation in automation encounters several obstacles. First, there is a lack of an established venue for information sharing, making it difficult to build upon the knowledge of peers. First, the absence of a well-established platform for information sharing hinders the ability to effectively capitalize on the knowledge of peers. Consequently, much of the research remains isolated, impeding the rapid dissemination of knowledge within the field (Mahbub 2015). Second, the absence of a standardized and unified process for automating design and construction leads to the individual development of standards, workflows, and terminologies. This lack of standardization presents a significant obstacle to research and learning within the field. Lastly, insufficient training materials hinder the acquisition of skills necessary to effectively utilize automation. Traditional in-person robotics training is resource-intensive, expensive, and designed for specific platforms (Peterson et al. 2021; Thomas 2013).
series	ACADIA
type	field note
email
last changed	2024/04/17 13:59

For more results click below: