Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 590

Reformat results as: short short into frame detailed detailed into frame

_id	acadia15_263
id	acadia15_263
authors	Ahlquist, Sean
year	2015
title	Social Sensory Architectures: Articulating Textile Hybrid Structures for Multi-Sensory Responsiveness and Collaborative Play
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 263-273
doi	https://doi.org/10.52842/conf.acadia.2015.263
summary	This paper describes the development of the StretchPLAY prototype as a part of the Social Sensory Surfaces research project, focusing on the design of tactile and responsive environments for children with Autism Spectrum Disorder (ASD). The project is directed specifically at issues with sensory processing, the inability of the nervous system to filter sensory input in order to indicate an appropriate response. This can be referred to as a “traffic jam” of sensory data where the intensity of such unfiltered information leads to an over-intensified sensory experience, and ultimately a dis-regulated state. To create a sensory regulating environments, a tactile structure is developed integrating physical, visual and auditory feedback. The structure is defined as a textile hybrid system integrating a seamless knitted textile to form a continuous topologically complex surface. Advancements in the fabrication of the boundary structure, of glass-fiber reinforced rods, enable the form to be more robustly structured than previous examples of textile hybrid or tent-like structures. The tensioned textile is activated as a tangible interface where sensing of touch and pressure on the surface triggers ranges of visual and auditory response. A specific child, a five-year old girl with ASD, is studied in order to tailor the technologies as a response to her sensory challenges. This project is a collaboration with students, researchers and faculty in the fields of architecture, computer science, information (human-computer interaction), music and civil engineering, along with practitioners in the field of ASD-based therapies.
keywords	Textile Hybrid, Knitting, Sensory Environment, Tangible Interface, Responsive systems and environments
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia15_483
id	acadia15_483
authors	Llaguno Munitxa, Maider; Bogosian, Biayna
year	2015
title	Sensing Urban Microclimates
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 483-496
doi	https://doi.org/10.52842/conf.acadia.2015.483
summary	Drawing from on-going theoretical and experimental research, this paper ultimately presents a conceptual framework that would promote the development of research and design strategies for post-smart cities.
keywords	GIS, data-visualization, microclimate, sensing, air-quality, urban-design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	ecaade2015_169
id	ecaade2015_169
authors	Nakama, Yuki; Onishi, Yasunobu and Iki, Kazuhisa
year	2015
title	Development of Building Information Management System with Data Collecting Functions based on IoT Technology
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 647-655
doi	https://doi.org/10.52842/conf.ecaade.2015.1.647
wos	WOS:000372317300070
summary	Facility management is aimed at energy saving, increasing the lifespan of buildings, enhancing the satisfaction of facility users and reducing running costs. To that end, it is important to grasp the conditions of the building in detail, and to analyze them one by one in order to execute building operation and maintenance strategically. However, conventional CAFM is insufficient. Therefore, we developed a system (called Building Information Management System) to utilize BIM data made on a Web site. We used groupware to support the system and an information platform that enables continuous management of a great variety of maintenance information. In addition, we developed a system to input information of building operation and maintenance using a mobile device on the site of checking and patrolling so as to reduce the burden of inputting information. A sensor network is used to acquire building operation and maintenance information to enhance building operation and maintenance. We also developed a system to automatically input sensing information into the building information for Building Information Management System, and to connect it with a 3D model. It has therefore become easier to collect the large amount of information necessary for strategic building operation and maintenance.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=0d63b958-7021-11e5-a1ec-00190f04dc4c
last changed	2022/06/07 07:59

_id	acadia15_173
id	acadia15_173
authors	Erdine, Elif
year	2015
title	Generative Processes in Tower Design: Simultaneous Integration of Tower Subsystems Through Biomimetic Analogies
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 173-184
doi	https://doi.org/10.52842/conf.acadia.2015.173
summary	The research presented in the paper formulates part of the methodological approach of a recently completed PhD thesis. The principle aim of the thesis is to achieve simultaneous integration of tower subsystems which can coherently adapt to their internal and external context during the initial phases of the design process. In this framework, the tower subsystems are grouped as the structural system, floor system, vertical circulation system, facade system, and environmental system. The paper focuses on the implementation of the specific biomimetic analogies towards the integration of tower subsystems through computationally generated dynamic systems. The biomimetic analogies are the mechanical and organizational properties of branched constructions, the mechanical properties of the bamboo stem, and the micro-structure of the porcupine quill/ hedgehog spine. Each biomimetic analogy is described in relation to the design domain. Methods of employing the mathematical and geometrical principles of the biomimetic analogies during design explorations are elaborated. Outcomes of the design output are outlined and discussed with a concentration on achieving tower subsystem integration, differentiation, and co-adaptation properties.
keywords	Tower, integration, biomimetics, minimal detours, bamboo stem, porcupine quill, hedgehog spine, generative
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	ecaade2015_298
id	ecaade2015_298
authors	Vannini, Virgínia Czarnobay and Turcienicz, Benamy
year	2015
title	Thermal Performance Associated with Materials in Early Stages of the Design Process
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 325-331
doi	https://doi.org/10.52842/conf.ecaade.2015.1.325
wos	WOS:000372317300035
summary	This work is part of a research on decision-making processes in architecture involving computer programs in the early stages of designing the building envelope. The research involves two steps: (1) intuitive processes analysis during the handling of the building envelope components - floor, roof, walls, windows, solar protection elements - and (2) generative processes analysis of building envelopes supported by performance models. This article is the first step, analyzing four housing prototypes, designed and built for the Solar Decathlon competition. First, the building envelope elements and thermal characteristics of these prototypes were modeled; then different materials that make up the envelope were tested, aimed at assessing thermal performance against the modifications proposed in six different scenarios. The results showed that it is possible to obtain intuitive solutions that equalize temperature changes in the early stages of design with computing environments even without the use of detailed data on the characteristics of buildings, features of the later stages of the project.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=a47c739a-702e-11e5-923c-bfb1b0817050
last changed	2022/06/07 07:58

_id	cf2015_155
id	cf2015_155
authors	Williams, Mani; Burry, Jane and Rao, Asha
year	2015
title	Understanding face to face interactions in a collaborative setting: Methods and Applications
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 155-174.
summary	Extensive studies have shown that face-to-face interactions are a critical component in a work environment. It is an effective communication method that builds trust between team members and creates social ties between colleagues to ease future collaboration. In this paper we present our interaction analysis system that utilized an indoor tracking system to provide insights on the spatial usage and interaction dynamics in collaborative spaces. This gives space layout designers and managers quick feedback on the performance of the space and its occupancies and allows interventions and evaluations to be conducted to fine-tune the space layout or organization structure to achieve optimal performance. We demonstrate our system with data collected from a recent international design workshop.
keywords	Face-to-face collaboration, indoor tracking, social interaction analysis, team management, workspace design.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	caadria2015_013
id	caadria2015_013
authors	Wu, Chengde and Mark J. Clayton
year	2015
title	Visualizing Climate Data as a 3D Climate Torus
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 273-281
doi	https://doi.org/10.52842/conf.caadria.2015.273
summary	In this research, a system is developed to visualize climate data as a 3D geometry, a climate torus. The system extracts time, dry bulb temperature, relative humidity, and wind speed information. Four points are created on a psychrometric chart using maximum temperature, minimum temperature, maximum humidity, and minimum humidity of a day. A closed curve passing these four points is drawn as a profile curve. 365 profile curves are generated for each day of the year. These curves are rotated along the vertical axis of the psychrometric chart, each at the incremental angle of 365/360, so that these curves rotate full 360 degrees to represent one year period. The system then generates a climate torus by lofting all the curves. Wind speed information is coded on the climate torus as holes. The diameter of the holes denotes wind speed. The climate torus is 3D printed after giving a minimum thickness to the surface. This process was assigned to sophomore architecture students. They showed great interest and gained better understanding of climate responsive design through the task. The climate torus has the future potential of coding more climate elements into it, e.g. solar radiation as colour, precipitation as texture, etc.
keywords	Climate data visualization; Climate torus; 3D printing
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ecaade2015_138
id	ecaade2015_138
authors	Achten, Henri
year	2015
title	Closing the Loop for Interactive Architecture - Internet of Things, Cloud Computing, and Wearables
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 623-632
doi	https://doi.org/10.52842/conf.ecaade.2015.2.623
wos	WOS:000372316000069
summary	Interactive architecture occurs in buildings when part of the building engages in exchange of information with the user, in such a way that the interactive system adjusts it's assumptions about the user's needs and desires. Acquiring the user's needs and desires is no trivial task. Currently there are no techniques that will reliably make such assertions. Building a system that unobtrusively monitors the inhabitant seems to be a tall order, and making the system ask the user all the time is very distracting for the user. An alternative option has become available however: personal wearables are increasingly monitoring the user. Therefore it suffices that the interactive system of the building gets in touch with those wearables, rather than duplicating the sensing function of the wearables. The enabling technology for wearables is Internet of Things, which connects physical objects (smart objects) on a virtual level, and Cloud Computing, which provides a scalable storage environment for wearables and smart objects. In this paper we outline the implications of the convergence of these three technologies in the light of interactive architecture.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=fdd9e706-6e8f-11e5-b1d4-00190f04dc4c
last changed	2022/06/07 07:54

_id	acadia16_362
id	acadia16_362
authors	Beesley, Philip; Ilgun, Zeliha, Asya; Bouron, Giselle; Kadish, David; Prosser, Jordan; Gorbet, Rob; Kulic, Dana; Nicholas, Paul; Zwierzycki, Mateusz
year	2016
title	Hybrid Sentient Canopy: An implementation and visualization of proprioreceptive curiosity-based machine learning
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 362-371
doi	https://doi.org/10.52842/conf.acadia.2016.362
summary	This paper describes the development of a sentient canopy that interacts with human visitors by using its own internal motivation. Modular curiosity-based machine learning behaviour is supported by a highly distributed system of microprocessor hardware integrated within interlinked cellular arrays of sound, light, kinetic actuators and proprioreceptive sensors in a resilient physical scaffolding system. The curiosity-based system involves exploration by employing an expert system composed of archives of information from preceding behaviours, calculating potential behaviours together with locations and applications, executing behaviour and comparing result to prediction. Prototype architectural structures entitled Sentient Canopy and Sentient Chamber developed during 2015 and 2016 were developed to support this interactive behaviour, integrating new communications protocols and firmware, and a hybrid proprioreceptive system that configured new electronics with sound, light, and motion sensing capable of internal machine sensing and externally- oriented sensing for human interaction. Proprioreception was implemented by producing custom electronics serving photoresistors, pitch-sensing microphones, and accelerometers for motion and position, coupled to sound, light and motion-based actuators and additional infrared sensors designed for sensing of human gestures. This configuration provided the machine system with the ability to calculate and detect real-time behaviour and to compare this to models of behaviour predicted within scripted routines. Testbeds located at the Living Architecture Systems Group/Philip Beesley Architect Inc. (LASG/PBAI, Waterloo/Toronto), Centre for Information Technology (CITA, Copenhagen) National Academy of Sciences (NAS) in Washington DC are illustrated.
keywords	intedisciplinary/collaborative design, intelligent environments, artificial intelligence, sensate systems
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	cf2015_175
id	cf2015_175
authors	Sauda, Eric; Beorkrem, Chris; Souvenir, Richard; Lanclos, Donna and Spurlock Scott
year	2015
title	Intelligent Architectural Settings Using a Computer Vision Based Visual Analytic Interface
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 175-189.
summary	This paper presents a framework to enable the understanding and designing of interactive architectural settings. We present our work in interactive public displays in the lobbies of university building, demonstrating both the design and evaluative dimensions. We identify the need for a method to understand meaningful behavior in architectural settings. We then present a unique approach combining computer vision and ethnography in a visual analytic interface using the SENSING Toolkit, a computer vision framework for collecting and storing long-term, large-scale human motion, and VALSE (Visual Analytics for Large-Scale Ethnography) an interactive, visual analytic interface called designed to allow domain experts to query and understand the data. Finally, we propose a new concept of media rich spaces that we call intelligent architectural settings.
keywords	Smart buildings, computer vision, ethnography, visual analytics.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	sigradi2015_10.309
id	sigradi2015_10.309
authors	Vaz, Carlos Eduardo Verzola; Karakiewicz, Justyna Anna; Kvan, Thomas
year	2015
title	Learning in the living campus - remotely sensing activities correlated to learning in outdoor spaces
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 589-595.
summary	This paper presents preliminary results of a research that seeks to develop an algorithmic model to represent how campus users interact with one another, as well with the surrounding environment, in order to comprehend the dynamics of activities that can be correlated to learning in open spaces and thus develop design guidance for such spaces. The hypothesis is that learning activities in outdoor spaces is also responsible to contribute to the life of the academic purpose of the campus, and that this can then inform design decisions for such spaces to better support outdoor informal learning. During the research, video recording and interviews were used to collect data and identify patterns of behavior in three research sites in the University of Melbourne.
keywords	Open Spaces, Learning, Remote Sensing, Computer Vision
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	caadria2015_122
id	caadria2015_122
authors	Wu, Kuan-Ying and June-Hao Hou
year	2015
title	Spark Wall
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 75-83
doi	https://doi.org/10.52842/conf.caadria.2015.075
summary	Responsive environment uses human computer interface (HCI) to improve how human experience their surrounding. Many research aimed at different kind of interactive environment modules with new digital tectonics or computation components. However, those new environments are sometimes could be manipulated by components which are less use-friendly and complex than traditional counterparts. In this paper, we implemented a real responsive interface – the Spark wall system, which use 160 actuator modules as our responsive feedback interface and depth camera as sensing input. We built up multi-modal interface for different operating purposes allowing user control responsive environment with their human behavior. User could change their body posture to change the pattern of the wall and moreover define touch-input area on any surface. For the user’s perspective, a responsive environment should be simply and understandable control. A responsive artifact should also be able to dynamically correspond to different methods of operation according to the user's intentions.
keywords	Responsive environment; human computer interface; surface computing; multi-modal interface; depth sensing.
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ecaade2024_35
id	ecaade2024_35
authors	Agkathidis, Asterios; Song, Yang; Symeonidou, Ioanna
year	2024
title	AI-Assisted Design: Utilising artificial intelligence as a generative form-finding tool in architectural design studio teaching
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 2, pp. 619–628
doi	https://doi.org/10.52842/conf.ecaade.2024.2.619
summary	Artificial Intelligence (AI) tools are currently making a dynamic appearance in the architectural realm. Social media are being bombarded by word-to-image/image-to-image generated illustrations of fictive buildings generated by tools such as ‘Midjourney’, ‘DALL-E’, ‘Stable Diffusion’ and others. Architects appear to be fascinated by the rapidly generated and inspiring ‘designs’ while others criticise them as superficial and formalistic. In continuation to previous research on Generative Design, (Agkathidis, 2015), this paper aims to investigate whether there is an appropriate way to integrate these new technologies as a generative tool in the educational architectural design process. To answer this question, we developed a design workflow consisting of four phases and tested it for two semesters in an architectural design studio in parallel to other studio units using conventional design methods but working on the same site. The studio outputs were evaluated by guest critics, moderators and external examiners. Furthermore, the design framework was evaluated by the students through an anonymous survey. Our findings highlight the advantages and challenges of the utilisation of AI image synthesis tools in the educational design process of an architectural design approach.
keywords	AI, GAI, Generative Design, Design Education
series	eCAADe
email
last changed	2024/11/17 22:05

_id	sigradi2015_10.177
id	sigradi2015_10.177
authors	Angelo, Alex Garcia Smith; Manna, Ilaria La; Hernandez, Oscar; Valdiviezo, Marlon; Lastras, Alejandra Díaz de León; Salazar, Oscar Ivan Campo; Montezuma, Vanessa; Zubieta, Marco
year	2015
title	Fab Lab and Multiculturalism in Latin America: The Fab Lat Kids case and the project “Emosilla”
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 551-557.
summary	This paper expresses a lecture of the experience of an investigation carried by a group of Latin American Fab Labs dedicated to the promotion of the use of modeling, digital fabrication, and network communication as tools of educational and social development of children in latin culture. This study is based on online workshop typologies with a methodological perspective that included local technological adaptations, data gathering, and exchange of knowledge on the fab lab network.
keywords	Design, Digital Manufacturing, Society, Technology Learning, Collaborative Network
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia17_102
id	acadia17_102
authors	Aparicio, German
year	2017
title	Data-Insight-Driven Project Delivery: Approach to Accelerated Project Delivery Using Data Analytics, Data Mining and Data Visualization
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 102-109
doi	https://doi.org/10.52842/conf.acadia.2017.102
summary	Today, 98% of megaprojects face cost overruns or delays. The average cost increase is 80% and the average slippage is 20 months behind schedule (McKinsey 2015). It is becoming increasingly challenging to efficiently support the scale, complexity and ambition of these projects. Simultaneously, project data is being captured at growing rates. We continue to capture more data on a project than ever before. Total data captured back in 2009 in the construction industry reached over 51 petabytes, or 51 million gigabytes (Mckinsey 2016). It is becoming increasingly necessary to develop new ways to leverage our project data to better manage the complexity on our projects and allow the many stakeholders to make better more informed decisions. This paper focuses on utilizing advances in data mining, data analytics and data visualization as means to extract project information from massive datasets in a timely fashion to assist in making key informed decisions for project delivery. As part of this paper, we present an innovative new use of these technologies as applied to a large-scale infrastructural megaproject, to deliver a set of over 4,000 construction documents in a six-month period that has the potential to dramatically transform our industry and the way we deliver projects in the future. This paper describes a framework used to measure production performance as part of any project’s set of project controls for accelerated project delivery.
keywords	design methods; information processing; data mining; big data; data visualization
series	ACADIA
email
last changed	2022/06/07 07:55

_id	acadia15_357
id	acadia15_357
authors	Ashour, Yassin; Kolarevic, Branko
year	2015
title	Heuristic Optimization in Design
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 357-369
doi	https://doi.org/10.52842/conf.acadia.2015.357
summary	This paper presents a workflow called the ‘heuristic optimization workflow’ that integrates Octopus, a Multi-Objective Optimization (MOO) engine with Grasshopper3D, a parametric modeling tool, and multiple simulation software. It describes a process that enables the designer to integrate disparate domains via Octopus and complete a feedback loop with the developed interactive, real-time visualization tools. A retrospective design of the Bow Tower in Calgary is used as a test case to study the impact of the developed workflow and tools, as well as the impact of MOO on the performance of the solutions. The overall workflow makes MOO based results more accessible to designers and encourages a more interactive ‘heuristic’ exploration of various geometric and topological trajectories. The workflow also reduces design decision uncertainty and design cycle latency through the incorporation of a feedback loop between geometric models and their associated quantitative data. It is through the juxtaposition of extreme performing solutions that serendipity is created and the potential for better multiple performing solutions is increased.es responsive systems, which focus on the implementation of multi-objective adaptive design prototypes from sensored environments. The intention of the work is to investigate multi-objective criteria both as a material system and as a processing system by creating prototypes with structural integrity, where the thermal energy flow through the prototype, to be understood as a membrane, can be controlled and the visual transparency altered. The work shows performance based feedback systems and physical prototype models driven by information streaming, screening, and application.
keywords	Multi-Objective Optimization, Generative Design, Performance-Based Design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	acadia15_123
id	acadia15_123
authors	Askarinejad, Ali; Chaaraoui, Rizkallah
year	2015
title	Spatial Nets: the Computational and Material Study of Reticular Geometries
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 123-135
doi	https://doi.org/10.52842/conf.acadia.2015.123
summary	Reticular systems are in many aspects a distinct taxonomy of volumetric geometries. In comparison with the conventional embodiment of a ‘volume’ that encapsulates a certain quantity of space with a shell reticular geometries emerge from the accumulation of micro elements to define a gradient of space. Observed in biological systems, such structures result from their material properties and formation processes as well as often ‘simple’ axioms that produce complex results. In micro or macro levels, from forest tree canopies to plant cell walls these porous volumes are not shaped to have a singular ‘solution’ for a purpose; they provide the fundamental geometric characteristics of a ‘line cloud’ that is simultaneously flexible in response to its environment, porous to other systems (light, air, liquids) and less susceptible to critical damage. The porosity of such systems and their volumetric depth also result in kinetic spatial qualities in a 4D architectural space. Built upon a ‘weaving’ organization and the high performance material properties of carbon fiber composite, this research focuses on a formal grammar that initiates the complex system of a reticular volume. A finite ‘lexical’ axiom is consisted of the basic characters of H, M and L responding to the anchor points on the highest, medium and lower levels of the extruding loom. The genome thus produces a string of data that in the second phase of programming are assigned to 624 points on the loom. The code aims to distribute the nodes across the flat line cloud and organize the sequence for the purpose of overlapping the tensioned strings. The virtually infinite results are then assessed through an evolutionary solver for confining an array of favorable results that can be then selected from by the designer. This research focuses on an approximate control over the fundamental geometric characteristics of a reticular system such as node density and directionality. The proposal frames the favorable result of the weave to be three-dimensional and volumetric – avoiding distinctly linear or surface formations.
keywords	Reticular Geometries, Weaving, Line Clouds, Three-dimensional Form-finding, Carbon fiber, Prepreg composite, Volumetric loom, Fiberous Materials, Weaving fabrication, Formal Language, Lexical design, Evolutionary solver
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	sigradi2015_8.192
id	sigradi2015_8.192
authors	Braida, Frederico; Rosa, Ashiley Adelaide; Silva, Izabela Ferreira; Homem, Diogo Machado; Jardim, Artur da Silva
year	2015
title	The exploration of the projetual world of the building blocks through the interactive digital game Minecraft
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 371-377.
summary	This article proposes a reflection on the possibilities of using games that explore architectural design world of building blocks applied to the universe of Architecture and Urbanism design, both from a literature search and through empirical data collected from a workshop coordinated by the Research Group of Languages and Expressions of Architecture, Urbanism and Design. The objective is to highlight the possibilities and limitations of using the projetual world of building blocks as an academic material for Architecture and Urbanism, especially after the experience of the interactive game Minecraft based on the Grammar Shape.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2015_100
id	ecaade2015_100
authors	Braumann, Johannes and Brell-Cokcan, Sigrid
year	2015
title	Adaptive Robot Control - New Parametric Workflows Directly from Design to KUKA Robots
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 243-250
doi	https://doi.org/10.52842/conf.ecaade.2015.2.243
wos	WOS:000372316000029
summary	In the past years the creative industry has made great advancements in the area of robotics. Accessible robot simulation and control environments based on visual programming systems such as Grasshopper and Dynamo now allow even novice users to quickly and intuitively explore the potential of robotic fabrication, while expert users can use their programming knowledge to create complex, parametric robotic programs. The great advantage of using visual programming for robot control lies in the quick iterations that allow the user to change both geometry and toolpaths as well as machinic parameters and then simulate the results within a single environment. However, at the end of such an iterative optimization process the data is condensed into a robot control data file, which is then copied over to the robot and thus loses its parametric relationship with the code that generated it. In this research we present a newly developed system that allows a dynamic link between the robot and the controlling PC for parametrically adjusting robotic toolpaths and collecting feedback data from the robot itself - enabling entirely new approaches towards robotic fabrication by even more closely linking design and fabrication.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=9d9da7bc-70ef-11e5-b2fd-efbb508168fd
last changed	2022/06/07 07:54

_id	cf2015_331
id	cf2015_331
authors	Brodeschi, Michal; Pilosof, Nirit Putievsky and Kalay, Yehuda E.
year	2015
title	The definition of semantic of spaces in virtual built environments oriented to BIM implementation
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 331-346.
summary	The BIM today can be a provider of inputs to performance analysis of different phenomena such as thermal comfort, energy consumption or winds. All these assessments are fundamental to the post occupation of the building. The attainment of approximate information of how the future building would behave under these conditions will reduce the waste of materials and energy resources. The same idea is used for evaluating the users occupation. Through simulation of human behavior is possible to evaluate which design elements can be improved. In complex structures such as hospital buildings or airports is quite complex for architects to determine optimal design solutions based on the tools available nowadays. These due to the fact users are not contemplated in the model. Part of the data used for the simulation can be derived from the BIM model. The three-dimensional model provides parametric information, however are not semantically enriched. They provide parameters to elements but not the connection between them, not the relationship. It means that during a simulation Virtual Users can recognize the elements represented in BIM models, but not what they mean, due to the lack of semantics. At the same time the built environment may assume different functions depending on the physical configuration or activities that are performed on it. The status of the space may reveal differences and these changes occur constantly and are dynamic. In an initial state, a room can be noisy and a moment later, quiet. This can determine what type of activities the space can support according to each change in status. In this study we demonstrate how the spaces can express different semantic information according to the activity performed on it. The aim of this paper is to simulate the activities carried out in the building and how they can generate different semantics to spaces according to the use given to it. Then we analyze the conditions to the implementation of this knowledge in the BIM model.
keywords	BIM, Virtual Sensitive Environments, Building Use Simulation, Semantics.
series	CAAD Futures
email
last changed	2015/06/29 07:55

For more results click below: