Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 556

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2015_247
id	ecaade2015_247
authors	Garcia, Manuel Jimenez and Retsin, Gilles
year	2015
title	Design Methods for Large Scale Printing
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 331-339
doi	https://doi.org/10.52842/conf.ecaade.2015.2.331
wos	WOS:000372316000039
summary	With an exponential increase in the possibilities of computation and computer-controlled fabrication, high density information is becoming a reality in digital design and architecture. However, construction methods and industrial fabrication processes have not yet been reshaped to accommodate the recent changes in those disciplines. Although it is possible to build up complex simulations with millions of particles, the simulation is often disconnected from the actual fabrication process. Our research proposes a bridge between both stages, where one drives the other, producing a smooth transition from design to production. A particle in the digital domain becomes a drop of material in the construction method.The architect's medium of expression has become much more than a representational tool in the last century, and more recently it has evolved even beyond a series of rules to drive from design to production. The design system is the instruction itself; embedding structure, material and tectonics and gets delivered to the very end of the construction chain, where it gets materialised. The research showcased in this paper investigates tectonic systems associated with large scale 3D printing and additive manufacturing methods, inheriting both material properties and fabrication constraints at all stages from design to production. Computational models and custom design software packages are designed and developed as strategies to organise material in space in response to specific structural and logistical input.Although the research has developed a wide spectrum of 3D printing methods, this paper focuses only on two of the most recent projects, where different material and computational logics were investigated. The first, titled Filamentrics, intends to develop free-form space frames, overcoming their homogeneity by introducing robotic plastic extrusion. Through the use of custom made extruders a vast range of high resolution prototypes were developed, evolving the design process towards the fabrication of precise structures that can be materialised using additive manufacturing but without the use of a layered 3D printing method. Instead, material limitations were studied and embedded in custom algorithms that allow depositing material in the air for internal connectivity. The final result is a 3x2x2.5m structure that demonstrates the viability of this construction method for being implemented in more industrial scenarios.While Filamentrics is reshaping the way we could design and build light weight structures, the second project Microstrata aims to establish new construction methods for compression based materials. A layering 3D printing method combines both the deposition of the binder and the distribution of an interconnected network of capillaries. These capillaries are organised following structural principles, configuring a series of channels which are left empty within the mass. In a second stage aluminium is cast in this hollow space to build a continuous tension reinforcement.
series	eCAADe
type	normal paper
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=07a6d8e0-6fe7-11e5-9994-cb14cd908012
last changed	2022/06/07 07:51

_id	caadria2015_220
id	caadria2015_220
authors	Cheng, Nancy Y.; Mehrnoush Latifi Khorasgani, Nicholas Williams, Daniel Prohasky and Jane Burry
year	2015
title	Understanding Light in Building Skin Design
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 323-332
doi	https://doi.org/10.52842/conf.caadria.2015.323
summary	This paper describes a design approach for discerning solar gain and assigning appropriate external shading devices. The approach includes a macro analysis locating where and when the building receives direct sunlight and locating desired interior daylighting; along with a micro analysis of how folded sun-shading motifs filter or block direct sunlight. The approach uses a collaborative analytical workflow with feedback from virtual and physical simulations informing design explorations. This iterative, reciprocating process is illustrated by student efforts to design shading structures for a building based on incident solar radiation. Designers begin with cutting and folding paper study models, then lasercut 2D tessellation patterns to create sculptural shading screens to be examined with a heliodon. Physical daylighting modeling reveals aesthetic opportunities to develop with parametric design. Motifs are then digitally modeled and analysed for shading effectiveness. Analysing the solar radiation of simple motifs helps beginners learn the software for subsequent urban situations. The efficacy of these simulations is discussed along with ways that the results could be interpreted to initiate design decisions for a building skin.
keywords	Solar simulation; collaborative design; folding surfaces; physical and digital simulation.
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	cf2015_324
id	cf2015_324
authors	Gerber, David Jason; Pantazis, Evangelos and Marcolino, Leandro Soriano
year	2015
title	Design Agency: Prototyping Multi-Agent Systems in Architecture
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 324.
summary	This paper presents research on the prototyping of multi-agent systems for architectural design. It proposes a design exploration methodology at the intersection of architecture, engineering, and computer science. The motivation of the work includes exploring bottom up generative methods coupled with optimizing performance criteria including for geometric complexity and objective functions for environmental, structural and fabrication parameters. The paper presents the development of a research framework and initial experiments to provide design solutions, which simultaneously satisfy complexly coupled and often contradicting objectives. The prototypical experiments and initial algorithms are described through a set of different design cases and agents within this framework; for the generation of façade panels for light control; for emergent design of shell structures; for actual construction of reciprocal frames; and for robotic fabrication. Initial results include multi-agent derived efficiencies for environmental and fabrication criteria and discussion of future steps for inclusion of human and structural factors.
keywords	Generative Design, Parametric Design, Multi-Agent Systems, Digital Fabrication, Form Finding, Reciprocal Frames.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	ecaade2015_109
id	ecaade2015_109
authors	Markusiewicz, Jacek, Strzala, Marcin and Koszewski, Krzysztof
year	2015
title	Modular Light Cloud. Design, Programming and Making - Towards the Integration of Creative Actions
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 91-101
doi	https://doi.org/10.52842/conf.ecaade.2015.2.091
wos	WOS:000372316000012
summary	Modular Light Cloud is an installation that is conceived to explore the boundaries of architecture and art. Its interactivity is a metaphor of mutual influences that derive from activities performed in space - associated with motion, sound and light.It is an experimental project focused on the integration of architectural elements, structure, information technology, performing arts, electronics and digital fabrication in architectural education.The project was completed in a two-week student workshop in collaboration with a contemporary dance artist. The students were taught the basics of parametric design, programming of electronic components and digital fabrication during tutorial classes. The making process combined three stages of development: design, construction and programming of interaction.The final form consists of two irregular spatial trusses made of aluminum profiles connected with 3d printed nodes. The profiles are equipped with LED strips and electronic components: light sensors, sound and communication between them. These systems control the intensity of light emitted by the diodes based on the inputs.The result is a working prototype presented as interactive installation featuring contemporary dance artist. It was displayed at art festivals and other events.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=e17b2300-6f83-11e5-836f-4becdc2939a0
last changed	2022/06/07 07:59

_id	acadia15_357
id	acadia15_357
authors	Ashour, Yassin; Kolarevic, Branko
year	2015
title	Heuristic Optimization in Design
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 357-369
doi	https://doi.org/10.52842/conf.acadia.2015.357
summary	This paper presents a workflow called the ‘heuristic optimization workflow’ that integrates Octopus, a Multi-Objective Optimization (MOO) engine with Grasshopper3D, a parametric modeling tool, and multiple simulation software. It describes a process that enables the designer to integrate disparate domains via Octopus and complete a feedback loop with the developed interactive, real-time visualization tools. A retrospective design of the Bow Tower in Calgary is used as a test case to study the impact of the developed workflow and tools, as well as the impact of MOO on the performance of the solutions. The overall workflow makes MOO based results more accessible to designers and encourages a more interactive ‘heuristic’ exploration of various geometric and topological trajectories. The workflow also reduces design decision uncertainty and design cycle latency through the incorporation of a feedback loop between geometric models and their associated quantitative data. It is through the juxtaposition of extreme performing solutions that serendipity is created and the potential for better multiple performing solutions is increased.es responsive systems, which focus on the implementation of multi-objective adaptive design prototypes from sensored environments. The intention of the work is to investigate multi-objective criteria both as a material system and as a processing system by creating prototypes with structural integrity, where the thermal energy flow through the prototype, to be understood as a membrane, can be controlled and the visual transparency altered. The work shows performance based feedback systems and physical prototype models driven by information streaming, screening, and application.
keywords	Multi-Objective Optimization, Generative Design, Performance-Based Design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	cf2015_326
id	cf2015_326
authors	Borges, Marina and Fakury, Ricardo H.
year	2015
title	Structural design based on performance applied to development of a lattice wind tower
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 326.
summary	This paper studies the process of parametric and algorithmic design, integrating structural analysis and design for the generation of complex geometric structures. This methodology is based on the Performative Model, where the shape is generated using performance criteria. In the approach, the development of complex structures is only possible by reversing the process of thinking to generate the form with established parameters for geometry, material and loading aspects. Thus, the structural engineer no longer only participates in the evaluation phase but also appears in the early stages, creating a process of exploration and production of common knowledge among architects and engineers. To research performance-based design, the development of a conceptual lattice for a wind tower is proposed. Thus, a system is made to generate geometries using Rhinoceros software, the Grasshopper plugin, and the VB programming language, integrated with stress analysis through the Scan & Solve plugin.
keywords	Structural Design, Parametric and Algorithm Architecture, Structural Analysis, Performative Model, Lattice Wind Tower.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	caadria2015_064
id	caadria2015_064
authors	Meyer, J.; G. Duchanois, J-C. Bignon and A. Bouali
year	2015
title	Computer Design and Digital Manufacturing of Folded Architectural Structures Composed of Wood Panels
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 641-650
doi	https://doi.org/10.52842/conf.caadria.2015.641
summary	The research presented in this paper revolves around the experimental development of the morpho-structural potential of folded architectural structures made of wood. The aims are to develop an innovative system for timber used in sustainable construction and to increase the inventory of wood architectural tectonics. Laminated timber panels associated with "digital production line" approach have opened up new perspectives for the building industry in creating prefabricated wooden structures. This article provides a characterization of the digital chain associated to the development of non-standard folded structures which consist of wood panels by way of a full-scale experimental pavilion. The purpose is the study of architectural design process from parametric modeling (through CNC machining) and assembly operations to production. Towards the completion of the pavilion, a number of analytical experiments have been performed.
keywords	Architecture, folded structure, robotic fabrication, computational design, parametric modeling, wood panels.
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	sigradi2015_3.268
id	sigradi2015_3.268
authors	Naboni, Roberto; Mirante, Lorenzo
year	2015
title	Metamaterial computation and fabrication of auxetic patterns for architecture
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 129-136.
summary	The paper investigates the potential of auxetics in architectural applications by means of computational design and additive manufacturing. This class of metamaterials expresses interesting behaviour related to the unusual characteristics of a negative Poisson’s ratio. Different patterns have been studied through a design workflow based on parametric software and the use of Particle Spring systems to support the form-finding process of bending-active auxetic structures. An advanced understanding of their bending capacity is explored with the use of variable infill patterns informed by structural analysis. Furthermore, principles for the design and fabrication of auxetic gridshells are discussed.
keywords	Auxetics, Computational Design, Form-Finding, Synclastic Shell, 3D-printing
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	cf2015_485
id	cf2015_485
authors	Anaf, Márcia and Harris, Ana Lúcia Nogueira de Camargo
year	2015
title	The geometry of Chuck Hoberman as the basis for the development of dynamic experimental structures
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 485.
summary	The cognitive-theoretical foundation referring to teach drawing as a way of thinking, as well as the construction of the environment by means of drawing using transforming geometries and the formal and para-formal computational process, creating unusual geometries through generative design processes and methodologies, can be seen as some of the main possibilities in exploring dynamic experimental structures for an Adaptive Architecture. This article presents the development of a model for articulated facades, inspired by Hoberman´s Tessellates, and his Adaptive Building Initiative (ABI) project to develop facades models that respond in real time to environmental changes. In addition, we describe an experiment based on the retractable structures, inspired by Hoberman´s work and experimentations. Solutions for responsive facades can offer more flexible architectural solutions providing better use of natural light and contributing to saving energy. Using Rhinoceros and the Grasshopper for modeling and test the responsiveness, the parametric model was created to simulate geometric panels of hexagonal grids that would open and close in reaction to translational motion effects, regulating the amount of light that reaches the building.
keywords	Parametric architecture, Hoberman´s Tessellates, Adaptive Building Initiative (ABI), Articulated Facades, Complex Geometries, Retractable structures, Retractable polyhedra.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	ecaade2015_87
id	ecaade2015_87
authors	Angelova, Desislava; Dierichs, Karola and Menges, Achim
year	2015
title	Graded Light in Aggregate Structures - Modulating the daylight in designed granular systems using online controlled robotic processes
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 399-406
doi	https://doi.org/10.52842/conf.ecaade.2015.2.399
wos	WOS:000372316000046
summary	The research project proposes an online-controlled robotic process that allows for grading light in aggregate structures using photometric analysis. It investigates the potential of designing specific daylight qualities through the behaviour-based robotic fabrication of the aggregate system. Two key methods are developed: the digital fabrication of the structure and a photometric analysis technique which is used as a sensor input for the robotic sensory interface. In its first part, the paper presents a series of photometric experiments on aggregate wall- and dome-structures. In its second part, the focus is laid on robotic manufacturing of these aggregate structures and the interactive fabrication of specific light conditions. To conclude further areas of research into emergent design processes with aggregates are outlined.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=4161e07e-6fe8-11e5-baaf-1fc96b3e1b94
last changed	2022/06/07 07:54

_id	acadia15_47
id	acadia15_47
authors	Chaaraoui, Rizkallah; Askarinejad, Ali
year	2015
title	Anisoptera; Anisopteran Deformation and the Latent Geometric Patterns of Wood Envelopes
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 47-56
doi	https://doi.org/10.52842/conf.acadia.2015.047
summary	Advancements in technologies provide Architects, today, with the means to expose new expressive forms using traditional materials. It is therefore possible to design dynamic actuating systems, where several different expressions, or differentiations inherent in the same material, are able to modify its topology and enhance its properties. Wood, traditionally used in construction, is given static expression during its life cycle, where an alignment, or assembly detail, helps retain its original shape. This research outlines the integration of specific and individual anatomical information of wood during the design process. It aids in utilizing the analyzed biological variability and natural irregularities of wood within a material-based architecture, in view of developing a lightweight, and light-filtering dynamic skin. Additionally, the research helps to explore an understanding of the differentiated material composition of wood as its major capacity, rather than its deficiency. Moreover, it analyzes form, material, and structure, as complex interrelations that are embedded in, and explored through an integral design process that seeks to employ typically disregarded, highly differentiated flat materials, in view of enhancing their latent dimensional deformation potential. The main focus of this research is to explore that latent geometric deformation of emerging patterns based on an array of heterogeneous wood veneers in relation to their Hygroscopic and Anisotropic properties. These properties are expressed through a set of flat skins and Mobius arrangements, articulating complex geometric ranges that reveal additional properties, such as bendability and flexibility.
keywords	Shape-shifting, Geometric patterns, Anisotropic, Hygroscopic, Open systems, Building envelope
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	acadia19_234
id	acadia19_234
authors	Grewal, Neil; Escallon, Miguel; Chaudhary, Abhinav; Hramyka, Alina
year	2019
title	INFRASONIC
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 234-245
doi	https://doi.org/10.52842/conf.acadia.2019.234
summary	In 2015, an earthquake of 7.8 magnitude displaced over 6.6 million people in Kathmandu, Nepal. Three years later, the country continues in its struggle to rebuild its capital. The aim of this study is to investigate a construction system, produced from locally sourced materials, that can aggregate and deploy as self-built, habitable infrastructure. The study focused on the relationship between material resonance, earthquake resistant structures, and fabrication strategies. An agent-based form-finding algorithm was developed using knowledge acquired through physical prototyping of mycelium-based composites to generate earthquake resistant geometries, optimize material usage, and enhance spatial performance. The results show compelling evidence for a construction methodology to design and construct a 3-4 story building that holds a higher degree of resistance to earthquakes. The scope of work contributes to advancements in bioengineering, confirming easy-to-grow, light-weight mycelium-composites as viable structural materials for construction.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:51

_id	sigradi2015_10.377
id	sigradi2015_10.377
authors	Lima, Pedro Gabriel de Sousa; Sousa, Débora de Oliveira; Romcy, Neliza Maria e Silva
year	2015
title	Epistemological basis to a contemporary approach for design teaching. The digital media, the reflective professional and the paradigm shift
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 602-608.
summary	We now live on the digital era. Technological innovations don’t stop to come to light, and our society little by little become more permeable and sensible to the present-day. The architect who refuses to just repeat architecture styles enters in a avant-garde position and gives intellectual impulses towards finding through your work a original proposal that will answer in fact the demands of a society that is correlate with your present-time. How to teach him to deal with the novel situations of the digital era and the paradigms to be used as basis and how should be the new pedagogical structure?
keywords	Digital Media, Parametric Architecture, Design Teaching, Digital Fabrication, Re ection-in-action
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	ecaade2015_256
id	ecaade2015_256
authors	Sachs, Hans
year	2015
title	Design=Production - Material and Process Driven Design and Production
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 269-276
doi	https://doi.org/10.52842/conf.ecaade.2015.2.269
wos	WOS:000372316000032
summary	With the comprehensive integration of software-based tools in actual processes of design development and fabrication, the boundaries between design and production become increasingly blurred. The methodology of the process of creation changes: the design development phase reaches up to the last produced model in a product series, in the same time the serial production cycle already starts with the first prototype.The aim of this research project is to explore and show the re-strengthening link between form, function, material and fabrication particularly driven by raising prominence of digital tools for design and production. Hereby the focus is on two points: the implementation of user data/input in the light of 'Open Innovation' as driver of form and function on one hand and the crafing inspired aproach of a comprehensive integration of material properties, behaviour tradional techniques of processing into the the design process.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=417116d4-6fe3-11e5-a9c3-f324760e4be6
last changed	2022/06/07 07:56

_id	ecaade2015_333
id	ecaade2015_333
authors	Baerlecken, Daniel and Gokmen, Sabri
year	2015
title	Osteotectonics - Trabecular Bone Structures and Their Adaptation for Customized Structural Nodes Using Additive Manufacturing Techniques
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 439-448
doi	https://doi.org/10.52842/conf.ecaade.2015.2.439
wos	WOS:000372316000050
summary	This paper discusses an approach to adapting trabecular bone structures for the design of complex architectural components exemplified through structural nodes. Based on the paradigm shift in additive fabrication, namely the ability to print structural metals, this paper identifies new methods for architectural and structural design that allow to create porous, intricate architectural components. Those components are designed in analogy to bone structures. The paper presents a metaball-based application, programmed in Processing, which allows creating n-legged nodes using parametric gradient maps. The approach aims at reduction of weight and waste, while exploring the novel aesthetic properties of such bio-constructed networks.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=b1066644-70d7-11e5-b019-7f01fe8cb7bc
last changed	2022/06/07 07:54

_id	sigradi2015_11.34
id	sigradi2015_11.34
authors	Bacinoglu, Saadet Zeynep
year	2015
title	From material to material with new abilities. Performative Skin: an unfinished product derived through the organizational logic as developed through research on ‘movement’
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 631-636.
summary	This paper presents the process and products from research on ‘a movement behavior’, transforming the initial surface from one state to other states. The study developed an initial model of material organization inspired by nature: the adaptable exoskeleton of the armadillium vulgare. Through geometric analysis of functional variation in the exoskeleton’s unit shape, and physical model making, the underlying principle is translated into design & production rules. The generative model of ‘an adaptable segmented system’ is constructed through a geometric abstraction of the exoskeleton, achieving diverse functions such as variability in form, volume, porosity, flexibility and strength, through a distribution of ‘material geometry’ with the folding technique. The potentiality of this parametric physical model (based on simple systematicity) is questioned in relation to diverse situations that result in complex surface adaptations. This research shows the formulation of a design intention.
keywords	Digital Craft, Folding, Material Computation, Informed Matter
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2015_279
id	ecaade2015_279
authors	Baquero, Pablo, Giannopoulou, Effimia and Cavazos, Jaime
year	2015
title	Strategies for Metallic Vault Structures - Aluminium Composite Panels Used as Structural Elements
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 169-176
doi	https://doi.org/10.52842/conf.ecaade.2015.2.169
wos	WOS:000372316000021
summary	This article explains parametric, fabrication and teaching strategies used during a workshop for constructing a full scale, self supporting, vault metal structure realized with parametric manufacturing methods. The key aim is to construct a small size, easy assembled and transportable pavilion, while focusing on new design and construction methods of a façade system in which the structure, joint and skin will integrate functions in a unifying structural system. For the investigation, we explore materials commonly used in façade industry, such as aluminum profiles and aluminium composite panels (ACP).
series	eCAADe
email
last changed	2022/06/07 07:54

_id	sigradi2015_3.111
id	sigradi2015_3.111
authors	Brand?o, Filipe; Paio, Alexandra; Sousa, José Pedro; Rato, Vasco
year	2015
title	Cork Re-Wall. Computational Methods of Automatic Generation and Digital Fabrication of Cork Partition Walls for Building Renovation
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 86-93.
summary	Developments in computational design methods and their integration with digital fabrication processes are ushering a customized fabrication paradigm. This paradigm is particularly suited to renovation of old buildings built with traditional construction techniques, a diversified corpus in which interventions are surgical and unique, and where partition walls play the central role. Insulation Cork Board and OSB, natural and renewable materials, can have an important role in a material system that responds to this context. Cork re-Wall is a parametrically modelled construction system and a file-to-factory digital process to generate high quality custom solutions to respond to diverse renovation design challenges.
keywords	Cork, Wood Frame, Digital Fabrication, Renovation, Parametric Design
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	ecaade2015_100
id	ecaade2015_100
authors	Braumann, Johannes and Brell-Cokcan, Sigrid
year	2015
title	Adaptive Robot Control - New Parametric Workflows Directly from Design to KUKA Robots
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 243-250
doi	https://doi.org/10.52842/conf.ecaade.2015.2.243
wos	WOS:000372316000029
summary	In the past years the creative industry has made great advancements in the area of robotics. Accessible robot simulation and control environments based on visual programming systems such as Grasshopper and Dynamo now allow even novice users to quickly and intuitively explore the potential of robotic fabrication, while expert users can use their programming knowledge to create complex, parametric robotic programs. The great advantage of using visual programming for robot control lies in the quick iterations that allow the user to change both geometry and toolpaths as well as machinic parameters and then simulate the results within a single environment. However, at the end of such an iterative optimization process the data is condensed into a robot control data file, which is then copied over to the robot and thus loses its parametric relationship with the code that generated it. In this research we present a newly developed system that allows a dynamic link between the robot and the controlling PC for parametrically adjusting robotic toolpaths and collecting feedback data from the robot itself - enabling entirely new approaches towards robotic fabrication by even more closely linking design and fabrication.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=9d9da7bc-70ef-11e5-b2fd-efbb508168fd
last changed	2022/06/07 07:54

_id	sigradi2015_000
id	sigradi2015_000
authors	Cybis Perreira, Alice T.; Pupo, Regiane T. (Ed.)
year	2015
title	Project Information for Interaction
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0; vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015
summary	The chosen theme "Project Information for interaction" reveals one of the most important ways that technology has offered to improve the design process by integrating information into the elements of digital graphic in a parametric way. This integration allows many design professionals to interact on the same model, enabling simulations, materializations, revisions with data more close to the reality, avoiding errors and wastes. Projects with highest social responsibility can be performed by inserting this new way of designing in education and professional practices. So, this conference is dedicated to give time and space for presentations and discussions of researches and experiences in this area applied to the various fields such as Architecture, Urbanism, Design, Animation, Arts, among others. Looking into another perspective, this issue also brings the concept of Smart Cities, where the provision of information integrated with graphics inserted in the towns components (streets, open areas, buildings and objects), allow more responsible interactions, generating sustainable and collaborative actions among citizens.
series	SIGRADI
email
last changed	2016/03/10 09:50

For more results click below: