Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 456

Reformat results as: short short into frame detailed detailed into frame

_id	cf2015_211
id	cf2015_211
authors	Hu, Yongheng
year	2015
title	The Computation Turn in Structural Performance Based Architecture Design
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 211-225.
summary	It is necessary for an architect to engage closely with structural design, to interpret their design idea thoroughly, and it requires carefully collaboration between architect and engineer. The structural performance based design is not only to obey structure principle but to explore different possibilities of engineer and architectural innovation. Architects could apply this method in the earlier stage of design, and it could provide the efficient solution for structure, create a new spatial experience and further improve the construction quality in the later phase of development. In comparison to structural performance-based design in history, the computational technology has made it possible for architects to implement further the structural knowledge in more dynamic and sophisticated environment. This paper will discuss the history development and current transformation of this method. Three research project will explain the current experimental design process and back the idea of this method.
keywords	Performance Based Architecture design, Computational Design, Structural Optimization
series	CAAD Futures
type	normal paper
email
last changed	2015/07/28 20:41

_id	cf2015_326
id	cf2015_326
authors	Borges, Marina and Fakury, Ricardo H.
year	2015
title	Structural design based on performance applied to development of a lattice wind tower
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 326.
summary	This paper studies the process of parametric and algorithmic design, integrating structural analysis and design for the generation of complex geometric structures. This methodology is based on the Performative Model, where the shape is generated using performance criteria. In the approach, the development of complex structures is only possible by reversing the process of thinking to generate the form with established parameters for geometry, material and loading aspects. Thus, the structural engineer no longer only participates in the evaluation phase but also appears in the early stages, creating a process of exploration and production of common knowledge among architects and engineers. To research performance-based design, the development of a conceptual lattice for a wind tower is proposed. Thus, a system is made to generate geometries using Rhinoceros software, the Grasshopper plugin, and the VB programming language, integrated with stress analysis through the Scan & Solve plugin.
keywords	Structural Design, Parametric and Algorithm Architecture, Structural Analysis, Performative Model, Lattice Wind Tower.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	cf2015_324
id	cf2015_324
authors	Gerber, David Jason; Pantazis, Evangelos and Marcolino, Leandro Soriano
year	2015
title	Design Agency: Prototyping Multi-Agent Systems in Architecture
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 324.
summary	This paper presents research on the prototyping of multi-agent systems for architectural design. It proposes a design exploration methodology at the intersection of architecture, engineering, and computer science. The motivation of the work includes exploring bottom up generative methods coupled with optimizing performance criteria including for geometric complexity and objective functions for environmental, structural and fabrication parameters. The paper presents the development of a research framework and initial experiments to provide design solutions, which simultaneously satisfy complexly coupled and often contradicting objectives. The prototypical experiments and initial algorithms are described through a set of different design cases and agents within this framework; for the generation of façade panels for light control; for emergent design of shell structures; for actual construction of reciprocal frames; and for robotic fabrication. Initial results include multi-agent derived efficiencies for environmental and fabrication criteria and discussion of future steps for inclusion of human and structural factors.
keywords	Generative Design, Parametric Design, Multi-Agent Systems, Digital Fabrication, Form Finding, Reciprocal Frames.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	cf2015_370
id	cf2015_370
authors	Kang, Julian; Campagnol, Gabriela;Caffey, Stephen and Clayton, Mark
year	2015
title	4D Construction Simulation Model of MASP
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 370-379.
summary	Building Information Modeling (BIM) is an effective tool students can use to learn how building components work together to secure necessary structural stability in the course of construction. In Summer 2014, students enrolled in the BIM class at Texas A&M University created a 4-dimensional construction simulation model of the Museu de Arte de São Paulo (MASP) to understand how the entire building is sustained by two huge concrete beams connected with four external columns. For this class project, students analyzed the building system while creating a 3-dimensional model of the museum. They also came up with a construction sequence that would best maintain structural integrity of the building in the course of construction, and then produced a short animation video explaining the MASP construction process. This paper presents how the MASP project helped students learn a unique building system and its construction sequence.
keywords	BIM, 4D Construction Simulation, MASP
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	caadria2015_030
id	caadria2015_030
authors	Daas, Mahesh and Andrew Wit
year	2015
title	Pedagogy of Architectural Robotics
doi	https://doi.org/10.52842/conf.caadria.2015.003
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 3-12
summary	As computation and robotics become more prevalent in all aspects of architecture, their impact on education assumes greater importance. The paper presents the outcomes of a collaborative undergraduate architectural design studio that investigates the realms of architectural robotics and computation by stepping into the fecund intersections between multiple disciplines. The pedagogical prototype, Unsolicited: An Inconvenient Studio, broadly focused on the topics of robotics and responsive architectures. The notion of robotics was interpreted to include a range of robotic technologies and their formal manifestations in the form of biomorphic, mechanomorphic, polymorphic, and amorphic robots, and interactive architecture. Taught using a recently developed framework that focuses on self-organizing systems and the creation of innovative technology-driven design entrepreneurs rather than merely on the creation of designed artefacts, students found themselves not only innovating with new digital technologies but also bridging architecture, urbanism and computer science. The paper describes the pedagogy, processes, and outcomes of the studio.
keywords	Robotics; interactive architecture; pedagogy; innovation; studio.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	cf2015_205
id	cf2015_205
authors	Oliveira, Eduardo; Kirley, Michael; Kvan, Tom; Karakiewicz, Justyna and Vaz, Carlos
year	2015
title	Distributed and heterogeneous data analysis for smart urban planning
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 205.
summary	Over the past decade, ‘smart’ cities have capitalized on new technologies and insights to transform their systems, operations and services. The rationale behind the use of these technologies is that an evidence-based, analytical approach to decision-making will lead to more robust and sustainable outcomes. However, harvesting high-quality data from the dense network of sensors embedded in the urban infrastructure, and combining this data with social network data, poses many challenges. In this paper, we investigate the use of an intelligent middleware – Device Nimbus – to support data capture and analysis techniques to inform urban planning and design. We report results from a ‘Living Campus’ experiment at the University of Melbourne, Australia focused on a public learning space case study. Local perspectives, collected via crowdsourcing, are combined with distributed and heterogeneous environmental sensor data. Our analysis shows that Device Nimbus’ data integration and intelligent modules provide high-quality support for decision-making and planning.
keywords	smart city, smart campus, middleware, data fusion, urban design, urban planning.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	acadia15_251
id	acadia15_251
authors	Pedro Sousa, José; Veiga, Germano; Moreira, A. Paulo
year	2015
title	Robotic Fabrication with Cork: Emerging Opportunities in Architecture and Building Construction
doi	https://doi.org/10.52842/conf.acadia.2015.251
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 251-260
summary	In the last two decades, CAD/CAM technologies have opened new conceptual and material opportunities in architecture. By combining computational design and digital fabrication technologies, architects have embraced a higher level of geometric complexity and variability in their solutions. Such non-standard possibilities were expanded with the recent introduction of robotic technologies in the discipline, which have allowed moving beyond the fabrication of building components to reach the construction of building parts. As a result of this digital condition, traditional materials have known innovative applications in architecture. In this context, this paper presents cork, which is a natural and recyclable material. By describing its unique set of properties and features, it argues about its relevance for the building construction in the present times. With this underlying motivation, this paper defines the current state of the research in architecture on the use of robotic fabrication with cork. It does so by describing and illustrating a set of different experiments conducted by the authors in their academic institutions. The results unveil a set of innovative applications of cork in building construction, and, at the same time, contribute to show how robotic technologies can be used to rethink and update traditional and old materials in architecture.
keywords	Building Construction, Cork, CAD/CAM, Robotic Fabrication, Design Customization
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	ecaade2015_185
id	ecaade2015_185
authors	Vamvakidis, Simos
year	2015
title	Gradient Transparency: Marine Animals As a Source of Inspiration. - Exploring Material Bio-Mimicry through the Latest 3D Printing Technology in Architectural surfaces
doi	https://doi.org/10.52842/conf.ecaade.2015.2.325
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 325-330
summary	Digital fabrication technologies are changing rapidly the way we design, as any other tool would affect the way we produce space. Multi layered 3D printing is already allowing architects, designers and engineers to experiment with new design processes and new ways of production. At the same time, little research has being done in the way gradient transparency (through multiple layered surfaces) can affect the design process through computation; a field that deserves further investigation. The focus of this paper is to explore bio-inspired material finding design processes while combining biology, architecture and material science. We explore performance driven design possibilities through a study of marine animals -and specifically cephalopods- where opacity between skin layers is controlled through color pigments - while black pigments are called melanophores - which is often used as a type of camouflage. We propose a computation model that follows the logic of gradient transparency through pigments to fit complex “host surfaces”. We define a “host” surface as a basic geometry on which the pigments are computed. This study provides the methodology for the design of biomimetic surfaces with gradient transparency, using controlled and computated sub geometries analogous to the melanophores pigments. We finally propose Pigment Skin, a computational design model as an example to materialize this study.
wos	WOS:000372316000038
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=c9365fd6-6fe6-11e5-9146-eff39522c429
last changed	2022/06/07 07:57

_id	cf2015_484
id	cf2015_484
authors	Liao, Kai; Vries, Bauke de; Kong, Jun and Zhang, Kang
year	2015
title	Pattern, cognition and spatial information processing: Representations of the spatial layout of architectural design with spatial-semantic analytics
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 484.
summary	In this paper, we review and extend the idea of Alexander’s “pattern language”, especially from the viewpoints of complexity theories, information systems, and human-computer interaction, to explore spatial cognition-based design representations for “intelligent and adaptive/interactive environment” in architecture and urban planning. We propose a theoretic framework of design patterns “with spatial information processing”, and attempt to incorporate state-of-the-art computational methods of information visualization/visual analytics into the conventional CAAD approaches. Focused on the spatial-semantic analytics, together with abstract syntactic pattern representation, by using “spatial-semantic aware” graph grammar formalization, i.e., Spatial Graph Grammars (SGG), the relevant models, algorithms and tool are proposed. We testify our theoretic framework and computational tool VEGGIE (a Visual Environment of Graph Grammar Induction Engineering) by using actual architectural design works (spatial layout exemplars of a small office building and the three house projects by Frank Lloyd Wright) as study cases, so as to demonstrate our proposed approach for practical applications. The results are discussed and further research is suggested.
keywords	Pattern language, complex adaptive systems, spatial cognition, design representations, spatial information processing, Artificial Intelligence, visual language, Spatial Graph Grammars (SGG), spatial-semantic analytics.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	cf2015_061
id	cf2015_061
authors	van Stralen, Mateus de Sousa and Cezarino, Cristiano
year	2015
title	Woka: Towards a dialogical design of future cities
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 61-76.
summary	This paper presents an experiment on an open source construction system named Woka, which allows anyone to design and produce dwellings using standard CNC techniques. Woka was developed as a dialogical design process that empowers self-builders to act in a more autonomous way, expanding the traditional role of design practice and the way buildings are created. The advent and popularization of new design and fabrication processes have encouraged a flux of new theories and project strategies based on computing, each with its promise of changing the architectural practice. Some of these resulted in intellectually seductive; visually provocative and complex shaped architectures, generating a new formal repertoire, but doesn’t indicate a paradigm shift in the process of production of architectural space, still based on authorship. Woka challenges this traditional process proposing dialogue as a design approach, shifting the focus from the object to intersubjectivity, amplifying the potential for novelty to arise.
keywords	Parametric design, digital fabrication, dialogical design, autonomous building
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	acadia19_168
id	acadia19_168
authors	Adilenidou, Yota; Ahmed, Zeeshan Yunus; Freek, Bos; Colletti, Marjan
year	2019
title	Unprintable Forms
doi	https://doi.org/10.52842/conf.acadia.2019.168
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp.168-177
summary	This paper presents a 3D Concrete Printing (3DCP) experiment at the full scale of virtualarchitectural bodies developed through a computational technique based on the use of Cellular Automata (CA). The theoretical concept behind this technique is the decoding of errors in form generation and the invention of a process that would recreate the errors as a response to optimization (Adilenidou 2015). The generative design process established a family of structural and formal elements whose proliferation is guided through sets of differential grids (multi-grids) leading to the build-up of large span structures and edifices, for example, a cathedral. This tooling system is capable of producing, with specific inputs, a large number of outcomes in different scales. However, the resulting virtual surfaces could be considered as "unprintable" either due to their need of extra support or due to the presence of many cavities in the surface topology. The above characteristics could be categorized as errors, malfunctions, or undesired details in the geometry of a form that would need to be eliminated to prepare it for printing. This research project attempts to transform these "fabrication imprecisions" through new 3DCP techniques into factors of robustness of the resulting structure. The process includes the elimination of the detail / "errors" of the surface and their later reinsertion as structural folds that would strengthen the assembly. Through this process, the tangible outputs achieved fulfill design and functional requirements without compromising their structural integrity due to the manufacturing constraints.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2015_279
id	ecaade2015_279
authors	Baquero, Pablo, Giannopoulou, Effimia and Cavazos, Jaime
year	2015
title	Strategies for Metallic Vault Structures - Aluminium Composite Panels Used as Structural Elements
doi	https://doi.org/10.52842/conf.ecaade.2015.2.169
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 169-176
summary	This article explains parametric, fabrication and teaching strategies used during a workshop for constructing a full scale, self supporting, vault metal structure realized with parametric manufacturing methods. The key aim is to construct a small size, easy assembled and transportable pavilion, while focusing on new design and construction methods of a façade system in which the structure, joint and skin will integrate functions in a unifying structural system. For the investigation, we explore materials commonly used in façade industry, such as aluminum profiles and aluminium composite panels (ACP).
wos	WOS:000372316000021
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2015_247
id	ecaade2015_247
authors	Garcia, Manuel Jimenez and Retsin, Gilles
year	2015
title	Design Methods for Large Scale Printing
doi	https://doi.org/10.52842/conf.ecaade.2015.2.331
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 331-339
summary	With an exponential increase in the possibilities of computation and computer-controlled fabrication, high density information is becoming a reality in digital design and architecture. However, construction methods and industrial fabrication processes have not yet been reshaped to accommodate the recent changes in those disciplines. Although it is possible to build up complex simulations with millions of particles, the simulation is often disconnected from the actual fabrication process. Our research proposes a bridge between both stages, where one drives the other, producing a smooth transition from design to production. A particle in the digital domain becomes a drop of material in the construction method.The architect's medium of expression has become much more than a representational tool in the last century, and more recently it has evolved even beyond a series of rules to drive from design to production. The design system is the instruction itself; embedding structure, material and tectonics and gets delivered to the very end of the construction chain, where it gets materialised. The research showcased in this paper investigates tectonic systems associated with large scale 3D printing and additive manufacturing methods, inheriting both material properties and fabrication constraints at all stages from design to production. Computational models and custom design software packages are designed and developed as strategies to organise material in space in response to specific structural and logistical input.Although the research has developed a wide spectrum of 3D printing methods, this paper focuses only on two of the most recent projects, where different material and computational logics were investigated. The first, titled Filamentrics, intends to develop free-form space frames, overcoming their homogeneity by introducing robotic plastic extrusion. Through the use of custom made extruders a vast range of high resolution prototypes were developed, evolving the design process towards the fabrication of precise structures that can be materialised using additive manufacturing but without the use of a layered 3D printing method. Instead, material limitations were studied and embedded in custom algorithms that allow depositing material in the air for internal connectivity. The final result is a 3x2x2.5m structure that demonstrates the viability of this construction method for being implemented in more industrial scenarios.While Filamentrics is reshaping the way we could design and build light weight structures, the second project Microstrata aims to establish new construction methods for compression based materials. A layering 3D printing method combines both the deposition of the binder and the distribution of an interconnected network of capillaries. These capillaries are organised following structural principles, configuring a series of channels which are left empty within the mass. In a second stage aluminium is cast in this hollow space to build a continuous tension reinforcement.
wos	WOS:000372316000039
series	eCAADe
type	normal paper
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=07a6d8e0-6fe7-11e5-9994-cb14cd908012
last changed	2022/06/07 07:51

_id	caadria2015_033
id	caadria2015_033
authors	Hadilou, Arman
year	2015
title	Phototropism of Tensile Façade System through Material Agency
doi	https://doi.org/10.52842/conf.caadria.2015.127
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 127-136
summary	This paper researches material agencies, mechanical systems and façade designs that are able to respond to environmental changes through local interactions, inspired by biological systems. These are based on a model of distributed intelligence founded on plants and animal collectives, from which intelligent behavior emerges through simple local associations. Biological collective systems integrate material form and responsiveness and have the potential to inform new architectural and engineering strategies. The design approach of this research is based on a data-driven methodology spanning from design inception to simulation and physical modeling. Data-driven models, common in the fields of natural science, offer a method to generate and test a multiplicity of responsive solutions. The driving concepts are three types of evolutionary adaptation: flexibility, acclimation, and learning. The proposed façade system is a responsive textile shading structure which uses integrated actuators that moderate their local environments through simple interactions with their immediate neighbors. Computational techniques coupled to material logics create an integral design framework leading to heterogeneous environmental and structural conditions, producing local responses to environmental stimuli and ultimately effective performance of the whole system.
keywords	Responsive facade; phototropism; material intelligence.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	eaea2015_t2_paper07
id	eaea2015_t2_paper07
authors	Januszkiewicz, Krystyna; Paszkowska, Natalia E.
year	2015
title	Towards the new Baroque Within the Historic Context of a City
source	ENVISIONING ARCHITECTURE: IMAGE, PERCEPTION AND COMMUNICATION OF HERITAGE [ISBN 978-83-7283-681-6],Lodz University of Technology, 23-26 September 2015, pp.186-198
summary	A new approach to design - Curvilinear forms designed in synthetic digital space - indicates the direction of a new turn in architecture, interest in its structural and environmental aspect. The presented case studies show how curvilinear forms of such architecture coexist with the historic context and how they inscribe in to the existing urban fabric with a complex historical substance. Following the Zeitgeist, the new architecture reconfigures the expression, reception and materiality, as well as uses the context to validate its existence. The features of this new architecture may be referred to the achievements of the Baroque and considered in a wider context of historical changes in the urban fabric.
keywords	heritage perception; curvilinear architecture; digital Baroque
series	EAEA
email
last changed	2016/04/22 11:52

_id	cf2015_463
id	cf2015_463
authors	Leblanc, François
year	2015
title	Super-details: Integrated patterns from 3D printing processes to performance-based design
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 463.
summary	Performance-based architecture has predominately been influenced by computational advances in simulating complex organizations. The advent of 3D printing, however, has introduced a new approach to generate complex forms, which is redirecting focus from shape-centric design to material design, namely, innovative structures and properties generated by the process itself. This article investigated the multiscale approach potential to design using extrusion-based 3D printing techniques that offer novel geometric organizations that conform to desired performance. It was found that 3D printed toolpaths adapted to extrusion-based systems render an anisotropic behavior to the architectural object that is best optimized by designing tessellated surfaces as the primary structural shape from which small-scale periodic surfaces can be embedded within a larger geometric system.
keywords	3D printing, multiscale design, extrusion-based systems, porous material, topology, CAD integration.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	ecaade2015_206
id	ecaade2015_206
authors	Luyten, Laurens
year	2015
title	CAAD and Conceptual Design Collaboration between Architects and Structural Engineers
doi	https://doi.org/10.52842/conf.ecaade.2015.2.215
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 215-224
summary	Architectural design benefits from a design collaboration between architect and engineers that starts early in the design process. This paper presents a proposal for a new structural language developed to support an early design collaboration between architect and structural engineer. This language expresses the essential characteristics of the conceptual design of the structural engineer, and requires a limited amount of structural engineering knowledge for the architect to comprehend. The language is evaluated in different case studies with architecture and interior architecture students: they show the students' appreciation as it is found easy to learn and use, and a helpful tool in conceptual design collaboration with a structural engineer. Although the language is developed for manual 3D sketching, the paper briefly indicates its potentials for digital 3D representations and more intelligent CAAD like Multi-Agent System (MAS).
wos	WOS:000372316000026
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=3d3e3cd0-6fe9-11e5-a486-00190f04dc4c
last changed	2022/06/07 07:51

_id	cf2015_447
id	cf2015_447
authors	Meyer, J.; Duchanois, G. and Bignon, J.C.
year	2015
title	Analysis and validation of the digital chain relating to architectural design process: Achievement of a folded structure composed of wood panels
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 447-459.
summary	The research presented in this paper revolves around the experimental development of the morpho-structural potential of folded architectural structures made of wood. The aims are to develop an innovative system for timber used in sustainable construction and to increase the inventory of wood architectural tectonics. First, this article provides a characterization of the digital chain associated to the development of non-standard folded structures consisting of wood panels. The purpose is to study the architectural design process from parametric modeling (through CNC machining) and assembly operations to production by way of a full-scale experimental pavilion. Secondly, a number of analytical experiments have been performed towards the completion of the pavilion, in order to validate the design process.
keywords	Architecture, folded structure, robotic fabrication, computational design, parametric modeling, wood panels
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	caadria2015_064
id	caadria2015_064
authors	Meyer, J.; G. Duchanois, J-C. Bignon and A. Bouali
year	2015
title	Computer Design and Digital Manufacturing of Folded Architectural Structures Composed of Wood Panels
doi	https://doi.org/10.52842/conf.caadria.2015.641
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 641-650
summary	The research presented in this paper revolves around the experimental development of the morpho-structural potential of folded architectural structures made of wood. The aims are to develop an innovative system for timber used in sustainable construction and to increase the inventory of wood architectural tectonics. Laminated timber panels associated with "digital production line" approach have opened up new perspectives for the building industry in creating prefabricated wooden structures. This article provides a characterization of the digital chain associated to the development of non-standard folded structures which consist of wood panels by way of a full-scale experimental pavilion. The purpose is the study of architectural design process from parametric modeling (through CNC machining) and assembly operations to production. Towards the completion of the pavilion, a number of analytical experiments have been performed.
keywords	Architecture, folded structure, robotic fabrication, computational design, parametric modeling, wood panels.
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ascaad2016_004
id	ascaad2016_004
authors	Peteinarelis, Alexandros; Socrates Yiannoudes
year	2016
title	Algorithmic Thinking in Design and Construction - Working with parametric models
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 19-28
summary	This paper examines the parametric model in algorithmic design processes, using the outcome of an educational digital design and fabrication course as a case study. In its long history, algorithmic design as a form-finding method, allowed designers to manage complex non-standard associative geometries, suggesting a shift from the digital representation of form, to its systematic representation into a parametric model through code. Rather than a style or a tool, the parametric model is best defined in mathematical terms; in practice it incorporates the organizational logic of the form and the topological associations of its parts, so that a change in its constitutive parameters will invoke a concerted update of the entire model, and, iteratively, formal and structural variations. In a series of design experiments that took place at the School of Architecture of the Technical University of Crete in the spring of 2015, we used parametric models represented into visual code, from the initial conceptual stage to fabrication. From the experience and outcome of this course, we deduced that, compared to other digital formation methods, parametric models allow the designer to constantly interact with the model through the code, producing discreet variations without losing control of the design intentions, by “searching” into a wide range (albeit finite) of virtual results. This suggested a shift in culturally embedded patterns of modernist design thinking.
series	ASCAAD
email
last changed	2017/05/25 13:13

For more results click below: