Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 589

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2015_241
id	ecaade2015_241
authors	Herneoja, Aulikki; Pihlajaniemi, Henrika, Österlund, Toni, Luusua, Anna and Markkanen, Piia
year	2015
title	Remarks on Transdisciplinarity as Basis for Conducting Research by Design Teamwork in Real World Context through Two Case Studies of Algorithm Aided Lighting Design
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 61-70
doi	https://doi.org/10.52842/conf.ecaade.2015.2.061
wos	WOS:000372316000009
summary	The definition of Research by Design (RD) as a research methodology is not yet well established. RD takes its position not only as a research method next to the 'traditional' sciences but also in relation to the creative design practice, where transdicsiplinarity is in essential role. Rather than defining architecture being transdisciplinary in itself, we see beneficial to conduct research together with various disciplines concerning the complexity of the life-world. Also in this interdisciplinary research group we are willing to hold on the designerly way of knowledge production. Of our practical experience working in an interdisciplinary research group shared values, research project management together with participation with evaluative aims were the most challenging aspects. At its best, attempt for genuine transcdisciplinarity was beneficial and rewarding, though sometimes challenging. We would like to target the discussion how we architects, as researchers identify in an interdisciplinary research group conducting transdisciplinary research.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=33cc5b92-6e8f-11e5-b6d3-1f476c2fddef
last changed	2022/06/07 07:49

_id	ecaade2015_27
id	ecaade2015_27
authors	Asanowicz, Aleksander
year	2015
title	Museum 2.0 - Implementation of 3D Digital Tools
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 709-715
doi	https://doi.org/10.52842/conf.ecaade.2015.1.709
wos	WOS:000372317300077
summary	The aim of this work is to try to set out how new technologies can influence the perception of a museum exposition. The problem which will be analysed is how to adapt an exhibition to the needs of visually impaired people. The problem will be considered on the basis of the case studies which were the part of an agreement between the Army museum in Bialystok and our Faculty. In traditional museums the main principle is the prohibition of touching exhibits.The project goal was to help blind people understand the features of the environment around them through the sense of touch. The novelty of this work is the study of how new digital technologies may improve the perception for the visually impaired.In the paper the method of 3D scanning, modelling and 3D printing will be presented. In conclusion the encountered problems and plans for further action will be discussed.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=8e079058-702a-11e5-8ac3-d3d5c9e6f5fe
last changed	2022/06/07 07:54

_id	sigradi2015_3.394
id	sigradi2015_3.394
authors	Bastiani, Jamile De; Pupo, Regiane T.
year	2015
title	Materialize to inform and educate
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 161-166.
summary	The protection and preservation of historical heritage are important tasks for all walks of life because rebuilding the exclusionary social memory, symbolically representing the nation’s identity. From this reflection, the problem arises of how to make the people appreciate the historic buildings. The Region of Medium High Uruguay, will serve as pilot study on a method of applying to the enhancement of national heritage by the population that is through the materialization of form. It is with the help of computer modeling combined with digital prototyping that seeks to find effective alternatives that use new technologies in the upgrading of historic buildings, a form of knowledge, integration and collaboration. In many areas of knowledge, consciousness makes the human being is connected to the world through all the senses. And touch, as experimentation and understanding of space it inhabits, may be the most overlooked sense in recent informatization times. In this research, the new realization techniques used to attempt to leverage awareness and understanding of a heritage, for a population hitherto alien to the cultural and historical values of a local architecture.
keywords	Materialize, Inform, Aware, Appreciation
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia23_v3_19
id	acadia23_v3_19
authors	Dickey, Rachel
year	2023
title	Material Interfaces
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 3: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-1-0]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 24-32.
summary	Based on our current daily rate, 85,410 hours is the average amount of time that an adult in the United States will spend on their phone in a lifetime (Howarth 2023). This is time spent texting, tweeting, emailing, snapping, chatting, posting, and interacting with an interface which each of us carry in our pocket. Kelly Dobson explains, “We psychologically view the cell phone as an extension of our bodies, which is why when you accidentally forget it or leave it behind you feel you have lost apart of yourself” (2013). In reality, this device is just one of many technologies which affect our relationship with our bodies and the physical world. Additionally, Zoom meetings, social media networks, on-line shopping, and delivery robots, all increasingly detach our bodies and our senses from our everyday experiences and interactions. In response to digital culture, Liam Young writes, “Perhaps the day will come when we turn off our target ads, navigational prompts, Tinder match notifications, and status updates to find a world stripped bare, where nothing is left but scaffolds and screens” (2015). Make no mistake; the collection of projects shared in these field notes is intended to be a counterpoint to such a prophesied future. However, the intent is not to try to compete with technology, but rather, to consider the built environment itself as an interface, encouraging interaction through feedback and responsivity directly related to human factors, finding ways to re-engage the body through design.
series	ACADIA
type	field note
email
last changed	2024/04/17 13:59

_id	cf2015_112
id	cf2015_112
authors	Globa, Anastasia; Moloney, Jules and Donn, Michael
year	2015
title	Urban Codes: Abstraction and Case-Based Approaches to Algorithmic Design and Implications for the Design of Contemporary Cities
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 112-123.
summary	This paper reports on a comparative study that evaluates two approaches to support the learning and use of algorithmic design in architecture, and extrapolates from this to consider applications for the algorithmic design of cities. The study explored two methods to reduce the barriers of using programming and potentially improve design performance. The first is the reuse of abstract algorithmic ‘patterns’. The second approach is the reuse of algorithmic solutions from specific design cases (case-based design). Reflecting on this research we outline how our findings discussed in relation to alternate thinking on the use of pattern, might inform a hybrid approach to the algorithmic design of cities.
keywords	Case-Based, Design Patterns, algorithmic design, Urban Design
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	sigradi2015_10.377
id	sigradi2015_10.377
authors	Lima, Pedro Gabriel de Sousa; Sousa, Débora de Oliveira; Romcy, Neliza Maria e Silva
year	2015
title	Epistemological basis to a contemporary approach for design teaching. The digital media, the reflective professional and the paradigm shift
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 602-608.
summary	We now live on the digital era. Technological innovations don’t stop to come to light, and our society little by little become more permeable and sensible to the present-day. The architect who refuses to just repeat architecture styles enters in a avant-garde position and gives intellectual impulses towards finding through your work a original proposal that will answer in fact the demands of a society that is correlate with your present-time. How to teach him to deal with the novel situations of the digital era and the paradigms to be used as basis and how should be the new pedagogical structure?
keywords	Digital Media, Parametric Architecture, Design Teaching, Digital Fabrication, Re ection-in-action
series	SIGRADI
email
last changed	2016/03/10 09:55

_id	sigradi2023_416
id	sigradi2023_416
authors	Machado Fagundes, Cristian Vinicius, Miotto Bruscato, Léia, Paiva Ponzio, Angelica and Chornobai, Sara Regiane
year	2023
title	Parametric environment for internalization and classification of models generated by the Shap-E tool
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1689–1698
summary	Computing has been increasingly employed in design environments, primarily to perform calculations and logical decisions faster than humans could, enabling tasks that would be impossible or too time-consuming to execute manually. Various studies highlight the use of digital tools and technologies in diverse methods, such as parametric modeling and evolutionary algorithms, for exploring and optimizing alternatives in architecture, design, and engineering (Martino, 2015; Fagundes, 2019). Currently, there is a growing emergence of intelligent models that increasingly integrate computers into the design process. Demonstrating great potential for initial ideation, artificial intelligence (AI) models like Shap-E (Nichol et al., 2023) by OpenAI stand out. Although this model falls short of state-of-the-art sample quality, it is among the most efficient orders of magnitude for generating three-dimensional models through AI interfaces, offering practical balance for certain use cases. Thus, aiming to explore this gap, the presented study proposes an innovative design agency framework by employing Shap-E connected with parametric modeling in the design process. The generation tool has shown promising results; through generations of synthetic views conditioned by text captions, its final output is a mesh. However, due to the lack of topological information in models generated by Shap-E, we propose to fill this gap by transferring data to a parametric three-dimensional surface modeling environment. Consequently, this interaction's use aims to enable the transformation of the mesh into quantifiable surfaces, subject to collection and optimization of dimensional data of objects. Moreover, this work seeks to enable the creation of artificial databases through formal categorization of parameterized outputs using the K-means algorithm. For this purpose, the study methodologically orients itself in a four-step exploratory experimental process: (1) creation of models generated by Shap-E in a pressing manner; (2) use of parametric modeling to internalize models into the Grasshopper environment; (3) generation of optimized alternatives using the evolutionary algorithm (Biomorpher); (4) and classification of models using the K-means algorithm. Thus, the presented study proposes, through an environment of internalization and classification of models generated by the Shap-E tool, to contribute to the construction of a new design agency methodology in the decision-making process of design. So far, this research has resulted in the generation and classification of a diverse set of three-dimensional shapes. These shapes are grouped for potential applications in machine learning, in addition to providing insights for the refinement and detailed exploration of forms.
keywords	Shap-E, Parametric Design, Evolutionary Algorithm, Synthetic Database, Artificial Intelligence
series	SIGraDi
email
last changed	2024/03/08 14:09

_id	acadia15_243
id	acadia15_243
authors	McKay, Mike
year	2015
title	Relative Positioning
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 243-250
doi	https://doi.org/10.52842/conf.acadia.2015.243
summary	How we understand the world is directly affected by our position in it. Constellations are simply the result of cognitive alignments related to our location in the universe, the horizon simply based on proximity and time. Relative Positioning explores the power of position in architecture: specifically, how Anamorphic projection and perspectival techniques can generate space and challenge our understanding of its form. Architectural illusion and perspectival deceptions have been investigated since antiquity in order to alter the perception of a given space, primarily used in an illusionary or optical manner. However, Anamorphic projection offers the potential to create dynamic spatial experiences that go well beyond simple projections or images/shapes simply painted onto a surface. Within Relative Positioning, architectural form exists in 3-dimensions (real, physical) but is perceived via procession and emergent perceptions based on choreographed alignments and foci—making it possible for a duality of visual perception to occur. Much like the diagonal movement through Villa Savoye or the space created by Matta-Clark’s cut, views and alignments add value, create perceptual shifts. One no longer views the architectural form as a whole, but as a collection of cinematic moments, fragments, serial form: a tension of object-qualities that elicits spatial ambiguity that puts pressure on the ‘real’ and opens up a world of wonder and excitement. This is a new form of collage.
keywords	Anamorphosis, perspective, perception
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:59

_id	ecaade2015_64
id	ecaade2015_64
authors	Nourian, Pirouz; Rezvani, Samaneh, Sariyildiz, Sevil and Hoeven, Franklinvander
year	2015
title	CONFIGURBANIST - Urban Configuration Analysis for Walking and Cycling via Easiest Paths
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 553-564
doi	https://doi.org/10.52842/conf.ecaade.2015.1.553
wos	WOS:000372317300060
summary	In a quest for promoting sustainable modes of mobility, we have revisited how feasible and suitable is it for people to walk or cycle to their destinations in a neighbourhood. We propose a few accessibility measures based on an 'Easiest Path' algorithm that provides also actual temporal distance between locations. This algorithm finds paths that are as short, flat and straightforward as possible. Considering several 'points of interest', the methods can answer such questions as “do I have a 5 minutes 'easy' walking/cycling access to all/any of these points?” or, “which is the preferred point of interest with 'easy' walking cycling access?” We redefine catchment zones using Fuzzy logics and allow for mapping 'closeness' considering preferences such as 'how far' people are willing to go on foot/bike for reaching a particular destination. The accessibility measures are implemented in the toolkit CONFIGURBANIST to provide real-time analysis of urban networks for design and planning.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=b1dffea2-70d9-11e5-8e0c-0377ddcc509c
last changed	2022/06/07 08:00

_id	ecaade2015_ws-collab
id	ecaade2015_ws-collab
authors	Novakova, Katerina; Henri Achten
year	2015
title	ColLab Sketch: Multi-Platform Collaborative Sketching on the Internet
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 37-38
doi	https://doi.org/10.52842/conf.ecaade.2015.2.037
wos	WOS:000372316000005
summary	Being overwhelmed by computing technologies, we are forwarding more and more of our skills into area of "thinking by head". Our designing capabilities are turning into capabilities of "how to work with very intelligent technology". The processes of human brain, nevertheless, are different to the processes in computer. Designers are said to think by hand. As architects we are looking for final forms that not only fulfil the technical requirements, but are beautiful as well. Therefore sketching is one of the skills that belongs to an architect in order to design and particularly to work in a team. The workshop will accordingly focus on sketching on electronic devices in comparison with sketching on paper. Is it actually possible to switch to tablets when sketching? If yes, which application is the best to use? In order to find that out, there will be a test of three applications: ColLab Sketch, Queeky and FlockDraw. The participants will be sketching on-line and helping to find the best way of communication by sketch. By drawing they will become a part of the research, their work will be post-produced and exhibited at the welcome dinner.
keywords	Sketching; Internet-based Collaboration; Digital vs. Physical
series	eCAADe
last changed	2022/06/07 08:00

_id	cf2015_205
id	cf2015_205
authors	Oliveira, Eduardo; Kirley, Michael; Kvan, Tom; Karakiewicz, Justyna and Vaz, Carlos
year	2015
title	Distributed and heterogeneous data analysis for smart urban planning
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 205.
summary	Over the past decade, ‘smart’ cities have capitalized on new technologies and insights to transform their systems, operations and services. The rationale behind the use of these technologies is that an evidence-based, analytical approach to decision-making will lead to more robust and sustainable outcomes. However, harvesting high-quality data from the dense network of sensors embedded in the urban infrastructure, and combining this data with social network data, poses many challenges. In this paper, we investigate the use of an intelligent middleware – Device Nimbus – to support data capture and analysis techniques to inform urban planning and design. We report results from a ‘Living Campus’ experiment at the University of Melbourne, Australia focused on a public learning space case study. Local perspectives, collected via crowdsourcing, are combined with distributed and heterogeneous environmental sensor data. Our analysis shows that Device Nimbus’ data integration and intelligent modules provide high-quality support for decision-making and planning.
keywords	smart city, smart campus, middleware, data fusion, urban design, urban planning.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	ijac202321410
id	ijac202321410
authors	Rihani, Nemeh
year	2023
title	Interactive immersive experience: Digital technologies for reconstruction and experiencing temple of Bel using crowdsourced images and 3D photogrammetric processes
source	International Journal of Architectural Computing 2023, Vol. 21 - no. 4, 730-756
summary	This paper investigates the potential of dense multi-image 3D photogrammetric reconstruction of destroyed cultural heritage monuments by employing public domain imagery for heritage site visitors. This work focuses on the digital reconstruction of the Temple of Bel, one of the heritage monuments in Palmyra, Syria, which was demolished in the summer of 2015 due to armed conflict. This temple is believed to be one of the most significant religious structures of the first century AD in the Middle East and North Africa (MENA) region with its unique design and condition before destruction actions. The process is carried out using solely one source of images; the freely available visitors’ images collected from the social media platforms and web search engines. This paper presents a digital 3D reconstruction workflow for the collected images using an advanced photogrammetry pipeline and dense image matching software. The virtually reconstructed outputs will be managed and implemented efficiently in Unity3D to create an entire 3D virtual interactive environment for the deconstructed temple to be visualised and experienced using the new Oculus Quest VR headset. The virtual Palmyra’s visitor will be offered an enhanced walk-through off-site interactive, immersive experience compared to the real-world one, which is non-existing and unobtainable at the site in the current time.
keywords	Cultural heritage, crowdsourced images, 3D photogrammetric reconstruction, digital heritage, virtual heritage, immersive technologies, Palmyra
series	journal
last changed	2024/04/17 14:30

_id	sigradi2015_11.8
id	sigradi2015_11.8
authors	Wallace, Mint Penpisuth; Schnabel, Marc Aurel
year	2015
title	Biomorphic Transportation Frameworks for Cities of the Future. Exploring new design framework for transportations
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 626-630.
summary	Development in the study of city expansion, through biomorphic generation, could potentially assist in the design of a transportation system that will accommodate expansion whilst contributing to an ecologically balanced growth. This paper focuses on a section of a design framework which looks at how generative systems can be implemented in an architectural design of a transportation network that will respond to the site’s projected future growth. This paper suggests that by integrating biomorphic generative systems into the design process we can generate designs that respond to the surrounding context and urban growth.
keywords	Biomorphic Algorithm, Generative Design, Processing, Urban Growth
series	SIGRADI
email
last changed	2016/03/10 10:02

_id	ecaade2015_284
id	ecaade2015_284
authors	Wit, Andrew and Daas, Mahesh
year	2015
title	Memos from an Inconvenient Studio - Unsolicited Projects for Responsive Architectures
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 177-184
doi	https://doi.org/10.52842/conf.ecaade.2015.2.177
wos	WOS:000372316000022
summary	Computation, robotics and intelligent building/fabrication systems are finding themselves ever more prevalent within both practice and education. The assimilation of these new tools and methodologies within the pedagogy of architectural education continues to gain greater importance as we perceive their rapid evolution and integration within surrounding emergent fields. Through the model of an Inconvenient Studio, this paper examines the intersection between interdisciplinary collaboration, architectural robotics and computation as a means of gaining a broader understanding of how the architectural learning environment can be transformed into a self-organizing system for emergent solutions. The pedagogical prototype for an Inconvenient Studio was broadly focused on the topics of architectural robotics and responsive architectures interpreted through a range of robotic technologies and their manifestations such as biomorphic, mechanomorphic, polymorphic and amorphic robotics. Through a set of three “Memos” (Self-Organization, Autonomy, Sentience), this paper will describe how students created innovative technology-driven think tanks that produced design entrepreneurs.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=e2614828-6e8c-11e5-90d3-5363f2e5743b
last changed	2022/06/07 07:57

_id	caadria2018_016
id	caadria2018_016
authors	Zahedi, Ata and Petzold, Frank
year	2018
title	Utilization of Simulation Tools in Early Design Phases Through Adaptive Detailing Strategies
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 11-20
doi	https://doi.org/10.52842/conf.caadria.2018.2.011
summary	Decisions taken at early stages of building design have a significant effect on the planning steps for the entire lifetime of the project as well as the performance of the building throughout its lifecycle (MacLeamy 2004). Building Information Modelling (BIM) could bring forward and enhance the planning and decision-making processes by enabling the direct reuse of data hold by the model for diverse analysis and simulation tasks (Borrmann et al. 2015). The architect today besides a couple of simplified simulation tools almost exclusively uses his know-how for evaluating and comparing design variants in the early stages of design. This paper focuses on finding new ways to facilitate the use of analytical and simulation tools during the important early phases of conceptual building design, where the models are partially incomplete. The necessary enrichment and proper detailing of the design model could be achieved by means of dialogue-based interaction concepts with analytical and simulation tools through adaptive detailing strategies. This concept is explained using an example scenario for design process. A generic description of the aimed dialog-based interface to various simulation tools will also be discussed in this paper using an example scenario.
keywords	BIM; Early Design Stages; Adaptive Detailing ; Communication Protocols; Design Variants
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	caadria2024_477
id	caadria2024_477
authors	Akbaylar Hayreter, Ipek, Gulec Ozer, Derya and As Cemrek, Handan
year	2024
title	Enhancing Cultural Heritage Digitalization and Visitor Engagement Through LiDAR Scanning and Gamification
source	Nicole Gardner, Christiane M. Herr, Likai Wang, Hirano Toshiki, Sumbul Ahmad Khan (eds.), ACCELERATED DESIGN - Proceedings of the 29th CAADRIA Conference, Singapore, 20-26 April 2024, Volume 2, pp. 283–292
doi	https://doi.org/10.52842/conf.caadria.2024.2.283
summary	Cultural heritage assets are valuable, providing important information about humanity's past and conveying it to the future. Unfortunately, conventional documentation is insufficient to preserve them for the next generations. Furthermore, increasing visitor interaction with these assets and raising awareness has been one of the challenges in this field. In this paper, we will examine how mobile LiDAR (Laser Detection and Ranging) technology can be used to precisely scan and document historical sites and how it can be combined with gamification elements to provide visitors with better experiences. It is also important that the texture taken in mobile laser scanning can be used to better visualize 3D mesh models of the scanned objects, so the fastest application that produces 3D models is selected. The study area is Syedra Ancient City in Alanya / Turkey, where the research and excavation process has continued since 2015 and the restoration projects started in 2023. Future work includes the creation of experiences to provide a basis for gamification and revitalizing the story of the heritage for the visitors through digital storytelling and AR (Augmented Reality). Preserving historical sites while providing visitors with a more in-depth, vivid and enjoyable experience are important facts for enhancing cultural heritage and passing it on to future generations.
keywords	Cultural Heritage, Digitalization, LiDAR, Mobile Laser Scanning, Digital Storytelling, Augmented Reality, Gamification
series	CAADRIA
email
last changed	2024/11/17 22:05

_id	cf2015_240
id	cf2015_240
authors	Aksoy, Yazgi Badem; Çagdas, Gülen and Balaban, Özgün
year	2015
title	A model for sustainable site layout design of social housing with Pareto Genetic Algorithm: SSPM
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 240.
summary	Nowadays as the aim to reduce the environmental impact of buildings becomes more apparent, a new architectural design approach is gaining momentum called sustainable architectural design. Sustainable architectural design process includes some regulations itself, which requires calculations, comparisons and consists of several possible conflicting objectives that need to be considered together. A successful green building design can be performed by the creation of alternative designs generated according to all the sustainability parameters and local regulations in conceptual design stage. As there are conflicting criteria's according to LEED and BREAM sustainable site parameters, local regulations and local climate conditions, an efficient decision support system can be developed by the help of Pareto based non-dominated genetic algorithm (NSGA-II) which is used for several possibly conflicting objectives that need to be considered together. In this paper, a model which aims to produce site layout alternatives according to sustainability criteria for cooperative apartment house complexes, will be mentioned.
keywords	Sustainable Site Layout Design, Multi Objective Genetic Algorithm, LEED-BREEAM.
series	CAAD Futures
type	normal paper
email
last changed	2015/06/29 09:30

_id	ecaade2015_246
id	ecaade2015_246
authors	Andraos, Sebastian
year	2015
title	DMR: A Semantic Robotic Control Language
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 261-268
doi	https://doi.org/10.52842/conf.ecaade.2015.2.261
wos	WOS:000372316000031
summary	DMR is a semantic robot-control language that attempts to change our relationship with machines and create true human-robot collaboration through intuitive interfacing. To this end, DMR is demonstrated in the DMR Interface, an Android app, which accepts semantic vocal commands as well as containing a GUI for feedback and verification. This app is combined with a robot-mounted 3D camera to enable robotic interaction with the surroundings or compensate for unpredictable environments. This combination of tools gives users access to adaptive automation whereby a robot is no longer given explicit instructions but instead is given a job to do and will adapt its movements to execute this regardless of any slight changes to the goal or environment. The major advantages of this system come in the vagueness of the instructions given and a constant feedback of task accomplishment, approaching the manner in which we subconsciously control our bodies or would guide another person to achieve a goal.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=1d9c3f50-6fe2-11e5-8742-0b2879594625
last changed	2022/06/07 07:54

_id	sigradi2016_673
id	sigradi2016_673
authors	Baquero, Pablo; Calixto, Victor; Orciuoli, Affonso; Vincent, Charles
year	2016
title	Simulation and prototyping benefits on digital fabrication [Teaching experience on previous workshops]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.981-985
summary	This paper explains how parametric methods are informed by simulation and prototyping, methods that were deployed during some series of digital fabrication workshops, their evolution and specifically with the objective of fabricating using combination of materials and CNC techniques, such as, 3d printing, laser cutting and milling machine. Teaching these workshops were the results of simulating and prototyping with students from the Biodigital Master (ESARQ UIC 2016) and a workshop done during Sigradi (Florianopolis 2015).
keywords	Teaching, 3D printing, Milling, Patterns, Collaboration, Fabrication
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2015_237
id	caadria2015_237
authors	Bazalo, Frano. and Tane J. Moleta
year	2015
title	Responsive Algorithms
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 209-218
doi	https://doi.org/10.52842/conf.caadria.2015.209
summary	An algorithm is a process of addressing a problem in a finite number of steps. In the context of architectural design, algorithmic thinking means taking on an interpretive role to understand the results in relation to design criteria, knowing how to modify the code to explore new options, and speculating on further design potentials. The application of algorithms within architecture often addresses the developed design stages, primarily to optimise structure, test environmental performance or to resolve complex construction. This research aims to explore algorithmic tools with a focus on early stage design. This design stage is often developed using traditional processes and is where algorithmic applications have been less successfully executed. The objectives are to algorithmically explore the areas of space planning, programme layout, form finding and form optimisation within early stage architectural design. Through the combination of a range of diverse algorithms, this research has an ultimate aim of integrating a computational workflow into practice at the early design stage.
keywords	Computational design, Early stage design
series	CAADRIA
email
last changed	2022/06/07 07:54

For more results click below: