Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 591

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2015_59
id	ecaade2015_59
authors	Österlund, Toni and Pihlajaniemi, Henrika
year	2015
title	VirtuAUL - A Design Framework for Adaptive Lighting
doi	https://doi.org/10.52842/conf.ecaade.2015.1.201
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 201-210
summary	The rapid development of lighting technology and the integration of information technology into our everyday environments, have opened up new possibilities for the creative and sustainable design of adaptive lighting. For the design, control and real-world implementation of adaptive lighting, we present a novel design framework called VirtuAUL. The framework consists of computational methods and tools that allow for the lighting designer to design adaptive lighting processes, that generate lighting patterns based on sensor stimuli, without the need for programming. The control and design methodology is based on the deployment of network-based agents: designer controls and guides flows of agents in a virtually defined network, where lights and sensors act as the network nodes. The VirtuAUL designer software allows for the designer to graphically define the adaptive processes that generate the lighting patterns by modifying the network nodes, topology, link directionalities, agent parameters and other design elements.
wos	WOS:000372317300021
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=862a93b4-702d-11e5-a471-537a93f22d37
last changed	2022/06/07 07:57

_id	ecaade2015_18
id	ecaade2015_18
authors	Agkathidis, Asterios
year	2015
title	Generative Design Methods - Implementing Computational Techniques in Undergraduate Architectural Education
doi	https://doi.org/10.52842/conf.ecaade.2015.2.047
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 47-55
summary	In continuation to the Deceptive Landscape Installation research project (Agkathidis, Kocatürk 2014), this paper investigates the implementation of generative design techniques in undergraduate architectural design education. After reviewing the main definitions of generative design synoptically, we have assessed the application of a modified generative method on a final year, undergraduate design studio, in order to evaluate its potential and its suitability within the framework of a research led design studio, leading to an RIBA accredited Part I degree. Our research findings based on analysis of the design outputs, student performance, external examiners reports as well as student course evaluation surveys indicate a positive outcome on the studio's design approach, as well as its suitability for an undergraduate design studio. They initiate a flourishing debate about accomplishments and failures of a design methodology, which still remains alien to many undergraduate curricula.
wos	WOS:000372316000007
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=e6f673d4-6e8e-11e5-be22-93874392c2e4
last changed	2022/06/07 07:54

_id	cf2015_326
id	cf2015_326
authors	Borges, Marina and Fakury, Ricardo H.
year	2015
title	Structural design based on performance applied to development of a lattice wind tower
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 326.
summary	This paper studies the process of parametric and algorithmic design, integrating structural analysis and design for the generation of complex geometric structures. This methodology is based on the Performative Model, where the shape is generated using performance criteria. In the approach, the development of complex structures is only possible by reversing the process of thinking to generate the form with established parameters for geometry, material and loading aspects. Thus, the structural engineer no longer only participates in the evaluation phase but also appears in the early stages, creating a process of exploration and production of common knowledge among architects and engineers. To research performance-based design, the development of a conceptual lattice for a wind tower is proposed. Thus, a system is made to generate geometries using Rhinoceros software, the Grasshopper plugin, and the VB programming language, integrated with stress analysis through the Scan & Solve plugin.
keywords	Structural Design, Parametric and Algorithm Architecture, Structural Analysis, Performative Model, Lattice Wind Tower.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	caadria2015_067
id	caadria2015_067
authors	Choi, Jungsik; Minchan Kim and Inhan Kim
year	2015
title	A Methodology of Mapping Interface for Energy Performance Assessment Based on Open BIM
doi	https://doi.org/10.52842/conf.caadria.2015.417
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 417-426
summary	Early design phase energy modelling is used to provide the design team with feedback about the impact of various building configurations. For better energy-conscious and sustainable building design and operation, the construction of BIM data interoperability for energy performance assessment in the early design phase is important. The purpose of this study is to suggest a development of BIM data interoperability for energy performance assessment based on BIM. To archive this, the authors have investigated advantages of BIM-based energy performance assessment through comparison with traditional energy performance assessment; and suggest requirements for development of Open BIM environment such as BIM data creation and BIM data application. In addition, the authors also suggested on BIM data interoperability system and developed mapping interface.
keywords	Building Information Modelling (BIM); Energy Performance Assessment (EPA); Data Interoperability; Energy Property; Industry Foundation Classes (IFC).
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2015_233
id	ecaade2015_233
authors	Garcia, Sara and Barros, Mário
year	2015
title	A Grammar-Based System for Chair Design - From Generic to Specific Shape Grammars
doi	https://doi.org/10.52842/conf.ecaade.2015.1.427
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 427-436
summary	A shape grammar-based computational system for chair design is presented. The paper focuses on the development of a methodology for modelling the definition stage of the design process. It is achieved by incorporating a specific grammar into a generic grammar to assist the designer in the convergence activities during the definition stage. Both grammars and their respective implementations were previously developed by different authors. The purpose is to enable the generation of a generic design solution that encompasses characteristics of a specific style, thus permitting subsequent exploration in the development stage.
wos	WOS:000372317300046
series	eCAADe
email
last changed	2022/06/07 07:50

_id	cf2015_324
id	cf2015_324
authors	Gerber, David Jason; Pantazis, Evangelos and Marcolino, Leandro Soriano
year	2015
title	Design Agency: Prototyping Multi-Agent Systems in Architecture
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 324.
summary	This paper presents research on the prototyping of multi-agent systems for architectural design. It proposes a design exploration methodology at the intersection of architecture, engineering, and computer science. The motivation of the work includes exploring bottom up generative methods coupled with optimizing performance criteria including for geometric complexity and objective functions for environmental, structural and fabrication parameters. The paper presents the development of a research framework and initial experiments to provide design solutions, which simultaneously satisfy complexly coupled and often contradicting objectives. The prototypical experiments and initial algorithms are described through a set of different design cases and agents within this framework; for the generation of façade panels for light control; for emergent design of shell structures; for actual construction of reciprocal frames; and for robotic fabrication. Initial results include multi-agent derived efficiencies for environmental and fabrication criteria and discussion of future steps for inclusion of human and structural factors.
keywords	Generative Design, Parametric Design, Multi-Agent Systems, Digital Fabrication, Form Finding, Reciprocal Frames.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	caadria2015_033
id	caadria2015_033
authors	Hadilou, Arman
year	2015
title	Phototropism of Tensile Façade System through Material Agency
doi	https://doi.org/10.52842/conf.caadria.2015.127
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 127-136
summary	This paper researches material agencies, mechanical systems and façade designs that are able to respond to environmental changes through local interactions, inspired by biological systems. These are based on a model of distributed intelligence founded on plants and animal collectives, from which intelligent behavior emerges through simple local associations. Biological collective systems integrate material form and responsiveness and have the potential to inform new architectural and engineering strategies. The design approach of this research is based on a data-driven methodology spanning from design inception to simulation and physical modeling. Data-driven models, common in the fields of natural science, offer a method to generate and test a multiplicity of responsive solutions. The driving concepts are three types of evolutionary adaptation: flexibility, acclimation, and learning. The proposed façade system is a responsive textile shading structure which uses integrated actuators that moderate their local environments through simple interactions with their immediate neighbors. Computational techniques coupled to material logics create an integral design framework leading to heterogeneous environmental and structural conditions, producing local responses to environmental stimuli and ultimately effective performance of the whole system.
keywords	Responsive facade; phototropism; material intelligence.
series	CAADRIA
email
last changed	2022/06/07 07:49

_id	ecaade2015_158
id	ecaade2015_158
authors	Kim, Do-Young; Jang, DoJin and author), Sung-AhKim
year	2015
title	A Symbiotic Interaction of Virtual and Physical Models in Designing Smart Building Envelope
doi	https://doi.org/10.52842/conf.ecaade.2015.2.633
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 633-642
summary	The building needs to be designed to minimize its environmental footprint and to be sufficiently adaptive to changing indoor and outdoor environmental conditions. The smart building envelope is an interactive system which is adaptive to environmental conditions by transforming its shape and functions. This is a kind of machine, not like a traditional building component, which should be based on integrated engineering design methods in addition to the exploration of formal aesthetics. As artistic genius or technical skill alone cannot not fully support the design of such a novel product, the design needs to be systemized by introducing a product development method such as prototyping in other industries. Prototyping needs to be integrated in school environment, even if it requires fundamental reconfiguration of current computer-based design studios. This paper aims at proposing a teaching methodology for educating the prototyping-based design of smart building envelope system in digital design studio. This methodology allows novice designers to operate interactions between virtual-physical models. And sketches are used to share ideas to other collaborators such as programming, mechanical operations without technical knowledge. The interactions between virtual-physical models and sketches contribute to not only complement virtual models and physical models, but also achieve high-performance of smart building envelope practically.
wos	WOS:000372316000070
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=215b1984-6e90-11e5-9ee8-00190f04dc4c
last changed	2022/06/07 07:52

_id	ecaade2015_202
id	ecaade2015_202
authors	Kim, Hyoungsub; Asl, Mohammad Rahmani and Yan, Wei
year	2015
title	Parametric BIM-based Energy Simulation for Buildings with Complex Kinetic Façades
doi	https://doi.org/10.52842/conf.ecaade.2015.1.657
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 657-664
summary	This paper aims to investigate a new methodology for analysing energy performance of buildings with complex kinetic façades. In this research, the flexible movements of individual kinetic façades in a building is determined by the façades' opening ratios and the sun path. The platform development is conducted through a visual programing environment in BIM, and the process is presented with a case study. Finally, the building's energy performance is compared with a building having static façades using whole building energy analysis tool.
wos	WOS:000372317300071
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=2e70ba2e-7021-11e5-9015-00190f04dc4c
last changed	2022/06/07 07:52

_id	ecaade2015_84
id	ecaade2015_84
authors	Kontovourkis, Odysseas and Tryfonos, George
year	2015
title	Robotic Fabrication of Tensile Mesh Structures and Real Time Response - The Development and Simulation of a Custom-Made End Effector Tool
doi	https://doi.org/10.52842/conf.ecaade.2015.2.389
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 389-398
summary	This paper presents an ongoing research, aiming to introduce a fabrication procedure for the development of tensile mesh systems. The purpose of this methodology is to be implemented in real time, based on a feedback loop logic cyclically iterated between robotic machine control and elastic material behaviour. Our purpose is to extend the capacity of robotically driven mechanisms to the fabrication of complex tensile structures and at the same time, reduce the defects that might occur due to the deformation of the elastic material. In this paper, emphasis is given to the development of a custom-made end effector tool, which is responsible to add elastic threads and create connections in the form of nodes. Based on additive fabrication logic, this process suggests the real time development of physical prototypes through the increasing smoothness of mesh structures.
wos	WOS:000372316000045
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ecaade2015_172
id	ecaade2015_172
authors	Mark, Earl and Zita Ultmann
year	2015
title	Environmental Footprint Design Tool - Exchanging GIS and CAD Data in Real Time
doi	https://doi.org/10.52842/conf.ecaade.2015.1.217
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 217-223
summary	The pairing of CAD and GIS data creates an opportunity to connect an architectural design process more immediately with its environmental constraints. Yet the GIS data may be too overwhelmingly complex to be fully used in CAD without computer-assisted methods of highlighting relevant information. This paper reports on the implementation of an integrated environment for three-dimensional design geometrical modeling and obtaining environmental impact feedback. The project focused on enhancements to the data exchange and on the development of a related set of tools. While the technologies of CAD and GIS may rely on separate representational models,in combination they can provide a more complete view of the built and natural environment. The challenge in integration is that of bridging analytical methods and database formats used in the two technologies. Our approach is rooted in part in constraint based design methods well established in CAD (e.g., Sketchpad, Generative Components, CATIA). Within such CAD systems geometrical transformations may be intentionally constrained to help enforce some previously made design decisions. Although this current implementation modestly relates to geometrical constraints, the use of probabilistic risk values is more central to its methodology.
wos	WOS:000372317300023
series	eCAADe
email
last changed	2022/06/07 07:59

_id	sigradi2015_8.239
id	sigradi2015_8.239
authors	Nisenbaum, Marcio; Kós, José Ripper
year	2015
title	The study of Urban Acoustics through Digital Processes: New approaches to developing a Methodology
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 378-383.
summary	This paper aims to discuss different possibilities and methodologies within the field of urban acoustics and the use of digital tools. As an attempt to integrate quantitative methods, such as sound mapping and noise control, with qualitative approaches, such as the soundscape studies, new strategies based on performance oriented design will be addressed. The notion of sonic effect as an important tool for integrating different perspectives will hence be discussed as a possible instrument for structuring generative design experiments. A theoretical framework and a possible design workflow are further drawn to possibly articulate future studies.
keywords	Soundscape, Noise Mapping, Sonic Effect, Acoustics, Computational Design
series	SIGRADI
email
last changed	2016/03/10 09:56

_id	ecaade2015_256
id	ecaade2015_256
authors	Sachs, Hans
year	2015
title	Design=Production - Material and Process Driven Design and Production
doi	https://doi.org/10.52842/conf.ecaade.2015.2.269
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 269-276
summary	With the comprehensive integration of software-based tools in actual processes of design development and fabrication, the boundaries between design and production become increasingly blurred. The methodology of the process of creation changes: the design development phase reaches up to the last produced model in a product series, in the same time the serial production cycle already starts with the first prototype.The aim of this research project is to explore and show the re-strengthening link between form, function, material and fabrication particularly driven by raising prominence of digital tools for design and production. Hereby the focus is on two points: the implementation of user data/input in the light of 'Open Innovation' as driver of form and function on one hand and the crafing inspired aproach of a comprehensive integration of material properties, behaviour tradional techniques of processing into the the design process.
wos	WOS:000372316000032
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=417116d4-6fe3-11e5-a9c3-f324760e4be6
last changed	2022/06/07 07:56

_id	ecaade2015_286
id	ecaade2015_286
authors	Safarova, Bara; Ledesma, Edna, Luhan, Gregory, Caffey, Stephen and Giusti, Cecilia
year	2015
title	Learning from Collaborative Integration:The Hackathon as Design Charrette
doi	https://doi.org/10.52842/conf.ecaade.2015.2.233
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 233-240
summary	This paper examines the application of innovative and interdisciplinary collaboration methods that emerged from the rapidly developing field of information technology and its intersection within the realm of design and architecture. These events, also referred to as hackathons, have risen in popularity in recent years (Artiles & Wallace, 2013) and stem from a design response for the increasing demand for accelerated design decisions within the field of architecture. This paper examines the potential of hackathons as a platform for rapid development of design ideas into prototypes within a time constraint of 24 hours. The paper explores the hackathon as a robust foundational element for pedagogical approaches rooted in interdisciplinary collaboration. Using a case-study research methodology, this paper probes the framework of the event, the outcomes, and the lessons learned. As this paper demonstrates, the hackathon required participants to identify and explore shifting territories through interdisciplinary teamwork to arrive at innovative solutions. In this setting, the format of the hackathon serves as a vibrant territory that enables a concrete theoretical contribution to design pedagogy, CAAD education, and collaborative professional practice.
wos	WOS:000372316000028
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=499d55fa-6e91-11e5-ae6e-00190f04dc4c
last changed	2022/06/07 07:56

_id	ecaade2015_38
id	ecaade2015_38
authors	Stavrakantonaki, Marina
year	2015
title	A Framework for Input Data Processing During Building Energy Model Calibration. A Case Study
doi	https://doi.org/10.52842/conf.ecaade.2015.1.625
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 625-634
summary	Key parameter of a reasoning process supporting real time performance is the use of active heuristics that facilitate the achievement of goals in a timely manner (Dodiawala et al. 1989). A real time approach should incorporate speed, timeliness and adaptation during the execution of tasks. Speed and efficient knowledge processing are addressed for the solution of complex building engineering problems, such as the calibration of Building Energy Models (BEM) to the actual performance data. During retrofit projects, calibrated BEM models aid the design process, and provide a solid base for performative assessments. Despite the demand for building performance evaluations, BEM calibration remains a work-intensive task (Lam et al. 2014). This study proposes a time efficient framework for BEM calibration input data management based on the methodology of a blackboard artificial intelligence knowledge processing system. The resulting model was used for sequential data mining for the energy assessment during the renovation of a commercial building.
wos	WOS:000372317300068
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=e440bdd6-7021-11e5-bdb0-00190f04dc4c
last changed	2022/06/07 07:56

_id	sigradi2015_10.7
id	sigradi2015_10.7
authors	Alves, Gilfranco; Trujillo, Juliana
year	2015
title	Cybersemiotic Design: a methodological purpose for digital design teaching
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 488-492.
summary	The paper aims to relate a specific aspect of the proposed methodology for digital design, presented on the PhD research called Cibersemiótica e Processos de Projeto: Metodologia em Revis?o, developed at the University of S?o Paulo (USP), with the didactic experience conducted at the subject Representaç?o e Criaç?o Digital 2, developed at the Architecture and Urbanism Course of the Federal University of Campo Grande (UFMS), Brazil. The paper’s theoretical foundation is based on the cybersemiotic work produced by the Danish philosopher S?ren Brier, which unifies two important conceptual frameworks: the Charles Sanders Peirce’s Semiotics, and the Second Order Cybernetics proposed by Heinz von Foerster.
keywords	Education, Design Processes, Parametric Design, Cybersemiotics
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia15_161
id	acadia15_161
authors	Baharlou, Ehsan; Menges, Achim
year	2015
title	Toward a Behavioral Design System: An Agent-Based Approach for Polygonal Surfaces Structures
doi	https://doi.org/10.52842/conf.acadia.2015.161
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 161-172
summary	The following research investigates the development of an agent-based design method as an integrative design tool for polygonal surface structures. The aim of this research is to develop a computational tool that self-organizes the emergence of polygonal surface structures from interaction between its constitutive lattices. This research focuses on the ethological level of morphogenesis that is relevant to the animal or insect societies, whereby agents mediate the material organizations with environmental aspects. Meanwhile, behavior-based approaches are investigated as a bottom-up system to develop a computational framework in which the lower-level features constantly interact. The lower-level features such as material properties (e.g., geometric descriptions) are abstracted into building blocks or agents to construct the agent’s morphology. The abstracted principles, which define the agent’s morphology, are aggregated into a generative tool to explore the emergent complexities. This exploration coupled with the generative constraint mechanisms steers the collective agents system toward the cloud of solutions; hence, the collective behaviors of agents constitute the polygonal surface structures. This polygonal system is a bottom up approach of developing the complex surface that emerges through topological and topographical interaction between cells and their surrounding environment. Subsequently, the integrative system is developed through agent-based parametric modelling, in which the knowledge-based system as a top-down approach is substituted with the agent system together with its morphological features and significant behaviors.
keywords	Agent-Based System, Behavioral-Based System, Polygonal Surface Structures, Self-Organization and Emergence
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2015_103
id	ecaade2015_103
authors	Choi, Joshua
year	2015
title	Democratic Play - Crowd-Sourcing through Digital Games for Architectural Design
doi	https://doi.org/10.52842/conf.ecaade.2015.2.187
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 187-197
summary	This thesis presents a system that uses games. It allows people to participate in the process of designing an architectural space. The site for the design project of this experimental methodology is a courtyard on MIT campus.The games are initially prepared by the architect through sampling various objects, materials, lighting, and figures from different media such as photogrammetric models around the building site and other relevant 3D modeling/animation contents. The goal of this design system is to collage those components into a final architectural form through a democratic process.The games are distributed to students, faculty and staff who will be the users of the space being designed. Through playing these games, they provide preference about the architectural program and various design decisions regarding formal composition, details, and finishes. This crowd-sourcing occurs both implicitly and explicitly while the game is being played, and the collected feed-back informs the architect about design development.This thesis questions the role of the architects in a democratic process of design: Are we the designer of the space, or creator of a system that controls the design process?.
wos	WOS:000372316000023
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia19_360
id	acadia19_360
authors	Dackiw, Jean-Nicolas Alois; Foltman, Andrzej; Garivani, Soroush; Kaseman, Keith; Sollazzo, Aldo
year	2019
title	Cyber-physical UAV Navigation and Operation
doi	https://doi.org/10.52842/conf.acadia.2019.360
source	ACADIA 19:UBIQUITY AND AUTONOMY [Proceedings of the 39th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-59179-7] (The University of Texas at Austin School of Architecture, Austin, Texas 21-26 October, 2019) pp. 360-367
summary	The purpose of this paper is to present a work in progress pertaining to drone pose estimation and flight calibration. This paper intends to underline the increasing importance of determining alternative path planning instruments through accurate localization for Unmanned Aerial Vehicles (UAVs) with the purpose of achieving complex flight operations for the emerging applications of autonomous robotics in surveying, design, fabrication, and on-site operations. This research is based on the implementation of novel technologies such as Augmented Reality (AR), Robot Operating System (ROS), and computational approaches to define a drone calibration methodology, leveraging existing methods for drone path planning. Drones are equipped with measurement systems to provide geo-location and time information such as onboard Global Positioning System (GPS) sensors, and Inertial Measurement Units (IMU). As stated in previous research, to increase navigation capabilities, measurements and data processing algorithms have a critical role (Daponte et al. 2015). The outcome of this work in progress showcases valuable results in calculating and assessing accurate positioning for UAVs, and developing data exchanges in transmission, reception, and tracking.
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:56

_id	ecaade2015_37
id	ecaade2015_37
authors	Forster, Julia; Fritz, Sara, Schleicher, Johannes and Rab, Nikolaus
year	2015
title	Developer Tools for Smart Approaches to Responsible-Minded Planning Strategies
doi	https://doi.org/10.52842/conf.ecaade.2015.1.545
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 545-551
summary	The city of Vienna follows a long-term initiative to become a Smart City. Within 2050 it aims to reduce 80% of the CO2 emissions (in comparison to 1990) and looks forward to generate ways for a sustainable energy production. (Smart City Framework Strategy 2014) Reaching this targets requires a complex planning process which involves interdisciplinary stakeholders and decision makers. An interactive multi-dimensional environment, comprising spatial objects and data models, is a helpful tool during these planning processes. This paper proposes a suitable path for the development of a structural framework for such an environment. The benefits of such an environment are shown in detail, based on an application of the economic solar heat potential in Vienna.
wos	WOS:000372317300059
series	eCAADe
email
last changed	2022/06/07 07:51

For more results click below: