Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 591

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2015_ws-robowood
id	ecaade2015_ws-robowood
authors	Hornung, Philipp; Johannes Braumann, Reinhold Krobath, Sigrid Brell-Cokcan and Georg Glaeser
year	2015
title	Robotic Woodcraft: Creating Tools for Digital Design and Fabrication
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 33-36
doi	https://doi.org/10.52842/conf.ecaade.2015.2.033
wos	WOS:000372316000004
summary	Robotic Woodcraft is a transdisciplinary, arts-based investigation into robotic arms at the University for Applied Arts Vienna. Bringing together the craftsmen of the Department for Wood Technology, the geometers of the Department for Arts and Technology, the young industrial design office Lucy.D and the roboticists of the Association for Robots in Architecture, the research project explores new approaches on how to couple high-tech robotic arms with high-end wood fabrication. In the eCAADe workshop, participants are introduced to KUKA\|prc (parametric robot control, Braumann and Brell-Cokcan, 2011) and shown approaches on how to create their own digital fabrication tools for customized fabrication processes involving wood.
keywords	Robotic woodcraft; Arts-based research; Robotic fabrication; Visual programming; Parametric robot control
series	eCAADe
last changed	2022/06/07 07:50

_id	cf2015_242
id	cf2015_242
authors	Vanz, Elena and Karakiewicz, Justyna
year	2015
title	Pedestrian as generator: Implementing a stand-alone piezo power generating device in the urban context
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 242.
summary	During the past decade the implementation of energy harvesting sensor technology, at micro scale, has occurred due to the rapid growth of low-powered device usage, such as mobile phones, laptops, and the development of LED lights significantly increasing in efficiency. Studies have demonstrated that the ability of this technology to harvest energy from the human body, such as footfalls, can be used in the generation of electricity. Piezoelectric sensor technology has been investigated for this purpose, due to its significant advancement in the efficiency and its application in a variety of designs. This research investigates how pedestrians can become generators of their own service, through the use of piezoelectric sensor technology, in the form of safety lighting. Proposed urban design scenarios explore the opportunity implementing a piezo power-generating device along high traffic pedestrians pathways in the City of Melbourne (Australia), evaluating real time and storage options, considering harvesting the energy during the day and using it at night time when needed.
keywords	Piezoelectric sensor technology, micro-scale distributed generation, public space.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	acadia15_323
id	acadia15_323
authors	Diniz, Nancy
year	2015
title	The Anatomy of a Prototype: Situating the Prototype and Prototyping on Design Conceptual Thinking
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 323-332
doi	https://doi.org/10.52842/conf.acadia.2015.323
summary	The role of prototypes is well established in the field of Design. There is however lack of knowledge about the fundamental nature of prototypes, there are different types of prototypes and they are sometimes difficult to define, for example: from low- versus high-fidelity prototypes, centered on evaluation or as support of design exploration. There have also been efforts to provide new ways of thinking about the activity of using prototypes, such as experience prototyping and paper prototyping. This paper aims at reflecting on efforts to provide a discourse for reflecting or understanding fundamental characteristics of prototypes in design and specifically the role of prototyping in design education.
keywords	Design process, design pedagogy, conceptual thinking through prototyping, physical computing
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:55

_id	caadria2015_246
id	caadria2015_246
authors	Fok, Wendy W.
year	2015
title	Delineating Crowd Sourced Ownership in the Digital Age for the Built Environment
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 43-52
doi	https://doi.org/10.52842/conf.caadria.2015.043
summary	Time Magazine, had named the “Person of the Year” to “YOU” (the crowd) in 2006 , due to the infinite potentials of the thousands and millions of ‘yous’ who control the media and financing within the new digital democracy. These same citizens of digital innovation create the new platforms—seen in the early beta developments of Kickstarter, Twitter, Wikipedia, and Facebook—and contribute to the manipulation of international exchange of information and power, creating value propositions beyond the traditional product complexity of the market. Peer exchange and crowd organizational strategy will be used to innovate the built environment, and it is pertinent for “digital” property and “real” property to recognize and benefit from this emergence. Professional codes of conduct, economic values, and legal regulations have become a means to an end of the designing of digital and physical property, as digital barriers lift much of the necessary pre-cautions that is required to govern collaboration. This body of research explores the qualifying factors of open innovation identity between the creators and the consumers, the state of design ethics and ownership uncertainties pertaining to the combinatory methods and mechanisms that employ these technologies.
keywords	Open Innovation; Crowd source; Authorship; Ownership; Digital Media; Digital Property; Physical Property.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	sigradi2015_13.181
id	sigradi2015_13.181
authors	Kato, Lucas; Braga, Rodrigo; Pazmino, Ana Veronica
year	2015
title	Educational kit for teaching robotics
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 738-745.
summary	The paper presents the kit of a robotic manipulator arm for teaching purposes, as a way to popularize robotics in space science and technology UFSC / Joinville, seeking to reach the public high school, technical and higher. As a result, the paper presents a robotic arm kit of low complexity with four degrees of freedom anthropomorphic type materialized via 3D printer, besides having similar functions to the arms used in industries such as teach function and a proposal to implement rectilinear movements, developed from handlers robot kinematics concepts.
keywords	Robotic Arm, Robotic, Education
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	ecaade2015_22
id	ecaade2015_22
authors	Keles, Hacer Yalim
year	2015
title	Embedding Parts in Sketches Using a Parallel Evolutionary Approach
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 269-276
doi	https://doi.org/10.52842/conf.ecaade.2015.1.269
wos	WOS:000372317300029
summary	Detection of emergent shapes in sketches requires extensive exploration of the design space. Automating this process with computational methods enables locating various alternatives sequentially or all at once simultaneously via high computational power. This not only helps efficient design space exploration but also provides a systematic way for keeping track of the design process. However, it is a challenge to define a generic computational method which optimizes the design space searches in time and space. The approaches that are based on optimization may suffer from time efficiency and local minima problems. These problems are substantially solved in this work by performing comprehensive parallel searches in the design space with a genetic algorithm. Advantage of this approach is that the local minima problem is reduced significantly without increasing the execution times.
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2015_169
id	ecaade2015_169
authors	Nakama, Yuki; Onishi, Yasunobu and Iki, Kazuhisa
year	2015
title	Development of Building Information Management System with Data Collecting Functions based on IoT Technology
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 647-655
doi	https://doi.org/10.52842/conf.ecaade.2015.1.647
wos	WOS:000372317300070
summary	Facility management is aimed at energy saving, increasing the lifespan of buildings, enhancing the satisfaction of facility users and reducing running costs. To that end, it is important to grasp the conditions of the building in detail, and to analyze them one by one in order to execute building operation and maintenance strategically. However, conventional CAFM is insufficient. Therefore, we developed a system (called Building Information Management System) to utilize BIM data made on a Web site. We used groupware to support the system and an information platform that enables continuous management of a great variety of maintenance information. In addition, we developed a system to input information of building operation and maintenance using a mobile device on the site of checking and patrolling so as to reduce the burden of inputting information. A sensor network is used to acquire building operation and maintenance information to enhance building operation and maintenance. We also developed a system to automatically input sensing information into the building information for Building Information Management System, and to connect it with a 3D model. It has therefore become easier to collect the large amount of information necessary for strategic building operation and maintenance.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=0d63b958-7021-11e5-a1ec-00190f04dc4c
last changed	2022/06/07 07:59

_id	caadria2015_012
id	caadria2015_012
authors	Nakama, Yuki; Yasunobu Onishi and Kazuhisa Iki
year	2015
title	Development of Building Information Management System Using BIM toward Strategic Building Operation and Maintenance
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 397-406
doi	https://doi.org/10.52842/conf.caadria.2015.397
summary	Facility management is aimed at energy saving, increasing the lifespan of buildings, enhancing the satisfaction of facility users and reducing running costs. To that end, it is important to grasp the conditions of the building in detail, and to analyze them one by one in order to execute building operation and maintenance strategically. However, conventional CAFM is insufficient. Therefore, we developed a system (called Building Information Management System) to utilize BIM data made in BIM-CAD on a Web site. We used groupware to support the system and an information platform that enables flexible management of a great variety of maintenance information. In addition, we developed an environmental measurement module and built a structure to sensor information automatically by using a development system. For quality maintenance, detailed information of building operation and maintenance is both from human input and sensors. The proposed method analysis of a building and provides the foundation for strategic control of maintenance.
keywords	BIM, FM, Groupware, Web application, Sensor
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	sigradi2015_6.183
id	sigradi2015_6.183
authors	Pazmino, Ana Veronica; Braga, Rodrigo
year	2015
title	Analysis tool for smart and interactive products
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 214-222.
summary	This paper aims to demystify the term of interaction and intelligence to be applied with appropriate conceptual basis. Currently there are a lot of innovative products called interactive or intelligent, when in fact nothing but responsive products and low interaction. This paper presents the theoretical foundations of interaction levels and smart design (related to artificial intelligence), then it shows the deconstruction and analysis of interactive products through specific criteria. The result item is a tool for analyzing interactive and intelligent products.
keywords	Interaction Design, Smart Design, Innovation
series	SIGRADI
email
last changed	2016/03/10 09:57

_id	caadria2015_142
id	caadria2015_142
authors	Stavric, Milena Albert Wiltsche and Thomas Bogensperger
year	2015
title	Generative Design for Folded Timber Structures
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 673-682
doi	https://doi.org/10.52842/conf.caadria.2015.673
summary	Folding structures belong to the group of lightweight structural systems, which often consist of polygonal elements like triangles or quadrangles. Folding structures whose construction is made out of cross-laminated timber (CLT) panels represent an innovative step in the timber industry, which has many advantages. CLT panels can be used simultaneously as supporting elements and as finishing building envelopes. There are many prefabrication possibilities, high efficient material consumption, low production and assembly costs, and it has environmental advantages over conventional materials used for folding structure like concrete, metal or glass. CLT folding structures are not sufficiently explored. One of the reasons may lie in the fact of limited design possibilities, which includes the specificity of CLT capacity. Another reason is maybe the inability to use standard wooden connectors to transfer the forces along the thin linear edges where the panels are supported. The aim of this paper is to present design possibilities through parametric modelling using the characteristics of CLT. Using the example of a wooden theatre stage we will present results of our research.
keywords	Parametric modelling; folding structures; cross-laminated timber.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2015_090
id	caadria2015_090
authors	Altabtabai, Jawad and Wei Yan
year	2015
title	A User Interface for Parametric Architectural Design Reviews
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 65-74
doi	https://doi.org/10.52842/conf.caadria.2015.065
summary	Architectural form and performance are affected by the designer's graphical representation methods. Parametric CAD systems, as design and representation tools, have become ubiquitous in architectural practice and education. Literature in the area of parametric design reviews is scarce and focused within building inspection and construction coordination domains. Additionally, platforms marketed as design review tools lack basic functionality for conducting comprehensive, parametric, and performance-based reviews. We have developed a user interface prototype where geometric and non-geometric information of a Building Information Model were translated into an interactive gaming environment. The interface allows simultaneous occupation and simulation of spatial geometry, enabling the user to engage with object parameters, as well as, performance-based, perspectival, diagrammatic, and orthographic representations for total spatial and performance comprehension.
keywords	Design cognition; Virtual/augmented reality and interactive environments; Human-computer interaction.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2015_10.74
id	sigradi2015_10.74
authors	Angulo, Antonieta; Velasco, Guillermo Vásquez de
year	2015
title	Virtual Sketching: Instructional Low Resolution Virtual Reality Simulations
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 506-513.
summary	This research paper describes the implementation of virtual reality immersive simulation studios in academia, facilitated by the use of the “Virtual Sketching Method” (VSM). The VSM allows the basic expression of architectural forms and the perceptual experience of interior and exterior spaces. It fosters simulations based on render-less (low resolution) visualization in contrast to other simulation workflows based on render-more (high resolution) visualization techniques. It bridges between different types of media and supports iterative cycles of formulation, prototyping, and assessment. The paper reports on students’ learning outcomes and their qualitative correlation with the VSM usability and effectiveness in design learning.
keywords	Virtual Reality, Immersive Simulation, Spatial Design, Virtual Sketching, Design Instruction
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia15_123
id	acadia15_123
authors	Askarinejad, Ali; Chaaraoui, Rizkallah
year	2015
title	Spatial Nets: the Computational and Material Study of Reticular Geometries
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 123-135
doi	https://doi.org/10.52842/conf.acadia.2015.123
summary	Reticular systems are in many aspects a distinct taxonomy of volumetric geometries. In comparison with the conventional embodiment of a ‘volume’ that encapsulates a certain quantity of space with a shell reticular geometries emerge from the accumulation of micro elements to define a gradient of space. Observed in biological systems, such structures result from their material properties and formation processes as well as often ‘simple’ axioms that produce complex results. In micro or macro levels, from forest tree canopies to plant cell walls these porous volumes are not shaped to have a singular ‘solution’ for a purpose; they provide the fundamental geometric characteristics of a ‘line cloud’ that is simultaneously flexible in response to its environment, porous to other systems (light, air, liquids) and less susceptible to critical damage. The porosity of such systems and their volumetric depth also result in kinetic spatial qualities in a 4D architectural space. Built upon a ‘weaving’ organization and the high performance material properties of carbon fiber composite, this research focuses on a formal grammar that initiates the complex system of a reticular volume. A finite ‘lexical’ axiom is consisted of the basic characters of H, M and L responding to the anchor points on the highest, medium and lower levels of the extruding loom. The genome thus produces a string of data that in the second phase of programming are assigned to 624 points on the loom. The code aims to distribute the nodes across the flat line cloud and organize the sequence for the purpose of overlapping the tensioned strings. The virtually infinite results are then assessed through an evolutionary solver for confining an array of favorable results that can be then selected from by the designer. This research focuses on an approximate control over the fundamental geometric characteristics of a reticular system such as node density and directionality. The proposal frames the favorable result of the weave to be three-dimensional and volumetric – avoiding distinctly linear or surface formations.
keywords	Reticular Geometries, Weaving, Line Clouds, Three-dimensional Form-finding, Carbon fiber, Prepreg composite, Volumetric loom, Fiberous Materials, Weaving fabrication, Formal Language, Lexical design, Evolutionary solver
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	ecaade2015_130
id	ecaade2015_130
authors	Asl, Mohammad Rahmani; Stoupine, Alexander, Zarrinmehr, Saied and Yan, Wei
year	2015
title	Optimo: A BIM-based Multi-Objective Optimization Tool Utilizing Visual Programming for High Performance Building Design
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 673-682
doi	https://doi.org/10.52842/conf.ecaade.2015.1.673
wos	WOS:000372317300073
summary	Within the architecture, engineering, and construction (AEC) industry, the application of multidisciplinary optimization methods has been shown to reach significant improvements in building performance compared to conventional design methods. As a result, the use of multidisciplinary optimization in the process of design is growing and becoming a common method that provides desired performance feedback for decision making. However, there is a lack of BIM-based multidisciplinary optimization tools that use the rich information stored in Building Information Models (BIM) to help designers explore design alternatives across multiple competing design criteria. In this paper we introduce Optimo, an open-source visual programming-based Multi-Objective Optimization (MOO) tool, which is developed to parametrically interact with Autodesk Revit for BIM-based optimization. The paper details the development process of Optimo and also provides the initial validation of its results using optimization test functions. Finally, strengths, limitations, current adoption by academia and industry, and future improvements of Optimo for building performance optimization are discussed.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2015_126
id	caadria2015_126
authors	Aydin, Serdar and Marc Aurel Schnabel
year	2015
title	Fusing Conflicts Within Digital Heritage Through the Ambivalence of Gaming
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 839-848
doi	https://doi.org/10.52842/conf.caadria.2015.839
summary	Digital Heritage is amphibian by spanning between unreal-real (digital) and real-real (actual) environments. Or its amphiboly derives from a fact that relies not on contrasting realities but a hub from which an oscillation occurs between the real and the actual. Inferring to Baudrillard’s criticism of contemporary art, this paper presents these disparities and ambivalent conditions found in digital heritage by examining a full-dome media-art application called Look-Up. Touching upon the authenticity issue in cultural heritage, a design research project, Augmenting Kashgar, is then introduced on the basis of the claim that a design manner can fuse conflicts within Digital Heritage. Developed within the special context of Kashgar, China’s westernmost city, the methodology of the project that follows a Research through Design (RtD) approach is provided. Making use of the architectural features of Kashgar, designing a digital game as a counter-strategy to existing cultural heritage programmes is discussed with references to Baudrillard’s perspective on video games and gamers.
keywords	Digital Heritage; Research through Design; game design; Augmenting Kashgar Project; Baudriallard.
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2015_sp_3.85
id	sigradi2015_sp_3.85
authors	Balzani, Renan do Nascimento; Silva, Neander Furtado
year	2015
title	The Problem of self-censorship in architectural students and the low cost tree-dimensional printers
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 767-770.
summary	Self-censorship can be observed in architectural students. Due to drawing and development methods of design representation, some students do not create the design they dream about. Believing that you do not have the ability or the technique to represent the ideas on paper or using physical models can cause the self-censorship in the students. The production of physical models is very important for the design thinking and for architectural student’s experience. The tree-dimensional printers can help as a tool to print complex volumetric models or detailed models allowing students to create freely.
keywords	Rapid Prototyping, 3D Printing, Design Theory, Architecture, Self-censorship
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2015_3.394
id	sigradi2015_3.394
authors	Bastiani, Jamile De; Pupo, Regiane T.
year	2015
title	Materialize to inform and educate
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 161-166.
summary	The protection and preservation of historical heritage are important tasks for all walks of life because rebuilding the exclusionary social memory, symbolically representing the nation’s identity. From this reflection, the problem arises of how to make the people appreciate the historic buildings. The Region of Medium High Uruguay, will serve as pilot study on a method of applying to the enhancement of national heritage by the population that is through the materialization of form. It is with the help of computer modeling combined with digital prototyping that seeks to find effective alternatives that use new technologies in the upgrading of historic buildings, a form of knowledge, integration and collaboration. In many areas of knowledge, consciousness makes the human being is connected to the world through all the senses. And touch, as experimentation and understanding of space it inhabits, may be the most overlooked sense in recent informatization times. In this research, the new realization techniques used to attempt to leverage awareness and understanding of a heritage, for a population hitherto alien to the cultural and historical values of a local architecture.
keywords	Materialize, Inform, Aware, Appreciation
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia16_362
id	acadia16_362
authors	Beesley, Philip; Ilgun, Zeliha, Asya; Bouron, Giselle; Kadish, David; Prosser, Jordan; Gorbet, Rob; Kulic, Dana; Nicholas, Paul; Zwierzycki, Mateusz
year	2016
title	Hybrid Sentient Canopy: An implementation and visualization of proprioreceptive curiosity-based machine learning
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 362-371
doi	https://doi.org/10.52842/conf.acadia.2016.362
summary	This paper describes the development of a sentient canopy that interacts with human visitors by using its own internal motivation. Modular curiosity-based machine learning behaviour is supported by a highly distributed system of microprocessor hardware integrated within interlinked cellular arrays of sound, light, kinetic actuators and proprioreceptive sensors in a resilient physical scaffolding system. The curiosity-based system involves exploration by employing an expert system composed of archives of information from preceding behaviours, calculating potential behaviours together with locations and applications, executing behaviour and comparing result to prediction. Prototype architectural structures entitled Sentient Canopy and Sentient Chamber developed during 2015 and 2016 were developed to support this interactive behaviour, integrating new communications protocols and firmware, and a hybrid proprioreceptive system that configured new electronics with sound, light, and motion sensing capable of internal machine sensing and externally- oriented sensing for human interaction. Proprioreception was implemented by producing custom electronics serving photoresistors, pitch-sensing microphones, and accelerometers for motion and position, coupled to sound, light and motion-based actuators and additional infrared sensors designed for sensing of human gestures. This configuration provided the machine system with the ability to calculate and detect real-time behaviour and to compare this to models of behaviour predicted within scripted routines. Testbeds located at the Living Architecture Systems Group/Philip Beesley Architect Inc. (LASG/PBAI, Waterloo/Toronto), Centre for Information Technology (CITA, Copenhagen) National Academy of Sciences (NAS) in Washington DC are illustrated.
keywords	intedisciplinary/collaborative design, intelligent environments, artificial intelligence, sensate systems
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	sigradi2015_3.111
id	sigradi2015_3.111
authors	Brand?o, Filipe; Paio, Alexandra; Sousa, José Pedro; Rato, Vasco
year	2015
title	Cork Re-Wall. Computational Methods of Automatic Generation and Digital Fabrication of Cork Partition Walls for Building Renovation
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 86-93.
summary	Developments in computational design methods and their integration with digital fabrication processes are ushering a customized fabrication paradigm. This paradigm is particularly suited to renovation of old buildings built with traditional construction techniques, a diversified corpus in which interventions are surgical and unique, and where partition walls play the central role. Insulation Cork Board and OSB, natural and renewable materials, can have an important role in a material system that responds to this context. Cork re-Wall is a parametrically modelled construction system and a file-to-factory digital process to generate high quality custom solutions to respond to diverse renovation design challenges.
keywords	Cork, Wood Frame, Digital Fabrication, Renovation, Parametric Design
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2015_323
id	cf2015_323
authors	Celani, Gabriela; Sedrez, Maycon; Lenz, Daniel and Macedo, Alessandra
year	2015
title	The future of the architect’s employment: To which extent can architectural design be computerised?
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 323.
summary	This paper was motivated by Frey and Osborne’s [1] work about the probability of different occupations being computerised in the near future, titled “The Future of Employment”. In their study, the architect’s profession had a very low probability of being automated, which does not do justice to the past fifty years of research in the field of architectural design automation. After reviewing some concepts in economics and labor, and identifying three categories of tasks in regards to automation, we propose a new estimate, by looking independently at 30 architectural tasks. We also took into account the reported advances in the automation of these tasks through scientific research. We conclude that there is presently a change in skill requirements for architects, suggesting that we have to rethink architectural education, so architects will not need to compete against the computer in the near future.
keywords	Computerisation, design automation, architectural profession, architectural education.
series	CAAD Futures
email
last changed	2015/06/29 07:55

For more results click below: