Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 590

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2015_130
id	ecaade2015_130
authors	Asl, Mohammad Rahmani; Stoupine, Alexander, Zarrinmehr, Saied and Yan, Wei
year	2015
title	Optimo: A BIM-based Multi-Objective Optimization Tool Utilizing Visual Programming for High Performance Building Design
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 673-682
doi	https://doi.org/10.52842/conf.ecaade.2015.1.673
wos	WOS:000372317300073
summary	Within the architecture, engineering, and construction (AEC) industry, the application of multidisciplinary optimization methods has been shown to reach significant improvements in building performance compared to conventional design methods. As a result, the use of multidisciplinary optimization in the process of design is growing and becoming a common method that provides desired performance feedback for decision making. However, there is a lack of BIM-based multidisciplinary optimization tools that use the rich information stored in Building Information Models (BIM) to help designers explore design alternatives across multiple competing design criteria. In this paper we introduce Optimo, an open-source visual programming-based Multi-Objective Optimization (MOO) tool, which is developed to parametrically interact with Autodesk Revit for BIM-based optimization. The paper details the development process of Optimo and also provides the initial validation of its results using optimization test functions. Finally, strengths, limitations, current adoption by academia and industry, and future improvements of Optimo for building performance optimization are discussed.
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia15_371
id	acadia15_371
authors	Hatefnia, Navid; Ghobad, Marjan
year	2015
title	Computing Outdoor Comfort Based on CBE Thermal Comfort Calculation for Ashrae-55
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 371-480
doi	https://doi.org/10.52842/conf.acadia.2015.371
summary	Environmental analysis as part of the initial design process, affords precise consideration of the bioclimatic human conditions within the environmental local context. The daily growth in inter alia knowledge of effective parameters in environmental conditions, quality weather data, human thermo-physiology studies – all contribute to improving the potential for achieving a relatively accurate analyses of environmental conditions by overlaying and computing all the climatic and thermo-physiological data. This paper describes a digital method for examining different points in the same context by computing all the input data available to understand the corresponding human comfort condition levels, thus leading to better decision-making at early design stages. Information about the site, climate, human thermo-physiology and behavioral aspects among others are collected where each data parameter is matched and analyzed to the context of every node on the model through a series of specific computational algorithms. Thereafter, the data from the nodes are statistically cleaned, classified and integrated based on the CBE thermal comfort calculation for ASHRAE-55. The results obtained using this method, can be tailored according to the desired outcomes. The proposed method identifies effective factors for human comfort condition improvement for different points on the context. It also provides a means to priorities specific parameters so that they can be manipulated for optimal digital design solutions, ie. Aligned to the desired conditions in the specific parts of the site with the aim of optimize outdoor space usage.
keywords	Micro-Climate, Outdoor Comfort, Urban Design, Environmental Aspects, Bio-Climatic Conditions
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:49

_id	sigradi2023_416
id	sigradi2023_416
authors	Machado Fagundes, Cristian Vinicius, Miotto Bruscato, Léia, Paiva Ponzio, Angelica and Chornobai, Sara Regiane
year	2023
title	Parametric environment for internalization and classification of models generated by the Shap-E tool
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 1689–1698
summary	Computing has been increasingly employed in design environments, primarily to perform calculations and logical decisions faster than humans could, enabling tasks that would be impossible or too time-consuming to execute manually. Various studies highlight the use of digital tools and technologies in diverse methods, such as parametric modeling and evolutionary algorithms, for exploring and optimizing alternatives in architecture, design, and engineering (Martino, 2015; Fagundes, 2019). Currently, there is a growing emergence of intelligent models that increasingly integrate computers into the design process. Demonstrating great potential for initial ideation, artificial intelligence (AI) models like Shap-E (Nichol et al., 2023) by OpenAI stand out. Although this model falls short of state-of-the-art sample quality, it is among the most efficient orders of magnitude for generating three-dimensional models through AI interfaces, offering practical balance for certain use cases. Thus, aiming to explore this gap, the presented study proposes an innovative design agency framework by employing Shap-E connected with parametric modeling in the design process. The generation tool has shown promising results; through generations of synthetic views conditioned by text captions, its final output is a mesh. However, due to the lack of topological information in models generated by Shap-E, we propose to fill this gap by transferring data to a parametric three-dimensional surface modeling environment. Consequently, this interaction's use aims to enable the transformation of the mesh into quantifiable surfaces, subject to collection and optimization of dimensional data of objects. Moreover, this work seeks to enable the creation of artificial databases through formal categorization of parameterized outputs using the K-means algorithm. For this purpose, the study methodologically orients itself in a four-step exploratory experimental process: (1) creation of models generated by Shap-E in a pressing manner; (2) use of parametric modeling to internalize models into the Grasshopper environment; (3) generation of optimized alternatives using the evolutionary algorithm (Biomorpher); (4) and classification of models using the K-means algorithm. Thus, the presented study proposes, through an environment of internalization and classification of models generated by the Shap-E tool, to contribute to the construction of a new design agency methodology in the decision-making process of design. So far, this research has resulted in the generation and classification of a diverse set of three-dimensional shapes. These shapes are grouped for potential applications in machine learning, in addition to providing insights for the refinement and detailed exploration of forms.
keywords	Shap-E, Parametric Design, Evolutionary Algorithm, Synthetic Database, Artificial Intelligence
series	SIGraDi
email
last changed	2024/03/08 14:09

_id	cf2015_279
id	cf2015_279
authors	Abdelmohsen, Sherif M. and Massoud, Passaint M.
year	2015
title	Making Sense of those Batteries and Wires: Parametric Design between Emergence and Autonomy
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 279-296.
summary	This paper reports on the process and outcomes of a digital design studio that integrates parametric design and generative systems in architectural and urban design projects. It explores the interrelationship between the emergence of innovative formal representations using parametric design systems on the one hand, and design autonomy; more specifically the conscious process of generating and developing an architectural concept, on the other. Groups of undergraduate students working on an architectural project are asked to identify a specific conceptual parti that addresses an aspect of architectural quality, define strategies that satisfy those aspects, and computational methodologies to implement those strategies, such as rule-based systems, self-organization systems, and genetic algorithms. The paper describes the educational approach and studio outcomes, discusses implications for CAAD education and curricula, and addresses issues to be considered for parametric and generative software development.
keywords	Parametric modeling, generative design, emergence, autonomy, design exploration, CAAD curriculum.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	ecaade2024_35
id	ecaade2024_35
authors	Agkathidis, Asterios; Song, Yang; Symeonidou, Ioanna
year	2024
title	AI-Assisted Design: Utilising artificial intelligence as a generative form-finding tool in architectural design studio teaching
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 2, pp. 619–628
doi	https://doi.org/10.52842/conf.ecaade.2024.2.619
summary	Artificial Intelligence (AI) tools are currently making a dynamic appearance in the architectural realm. Social media are being bombarded by word-to-image/image-to-image generated illustrations of fictive buildings generated by tools such as ‘Midjourney’, ‘DALL-E’, ‘Stable Diffusion’ and others. Architects appear to be fascinated by the rapidly generated and inspiring ‘designs’ while others criticise them as superficial and formalistic. In continuation to previous research on Generative Design, (Agkathidis, 2015), this paper aims to investigate whether there is an appropriate way to integrate these new technologies as a generative tool in the educational architectural design process. To answer this question, we developed a design workflow consisting of four phases and tested it for two semesters in an architectural design studio in parallel to other studio units using conventional design methods but working on the same site. The studio outputs were evaluated by guest critics, moderators and external examiners. Furthermore, the design framework was evaluated by the students through an anonymous survey. Our findings highlight the advantages and challenges of the utilisation of AI image synthesis tools in the educational design process of an architectural design approach.
keywords	AI, GAI, Generative Design, Design Education
series	eCAADe
email
last changed	2024/11/17 22:05

_id	caadria2015_226
id	caadria2015_226
authors	Bidgoli, Ardavan and Daniel Cardoso-Llach
year	2015
title	Towards A Motion Grammar for Robotic Stereotomy
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 723-732
doi	https://doi.org/10.52842/conf.caadria.2015.723
summary	This paper presents progress towards the definition of a motion grammar for robotic stereotomy. It describes a vocabulary of motions able to generate complex forms by cutting, slicing, and/or carving 3-D blocks of material using a robotic arm and a custom made cutting tool. While shape grammars usually deal with graphical descriptions of designs, a motion grammar seeks to address the 3-D harmonic movements of machine, tool, and material substrate choreographically, suggesting motion as a generative vehicle of exploration in both designing and making. Several models and prototypes are presented and discussed.
keywords	Generative Fabrication; Robots in Architecture; Hot Wire cutting; Shape Grammars; Stereotomy; Computational Making.
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ecaade2015_303
id	ecaade2015_303
authors	Coroado, Luís; Pedro, Tiago, D'Alpuim, Jorge, Eloy, Sara and Dias, MiguelSales
year	2015
title	VIARMODES: Visualization and Interaction in Immersive Virtual Reality for Architectural Design Process
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 125-134
doi	https://doi.org/10.52842/conf.ecaade.2015.1.125
wos	WOS:000372317300014
summary	The complexity of today´s architecture solutions brings the need to integrate, in the design process, digital tools for creation, visualization, representation and evaluation of design solutions. This paper proposes the adoption of a new Virtual Reality (VR) tool, referred to as VIARmodes, to support the architectural design process with an improved communication across different specialities, towards the facilitation of the project decision process. This tool allows a complete visualization of the design, specifically useful during the detailed design phase, including the architecture design and of other engineering specialities, progressively and interactively adapting the project visualization to the information needed for each discipline. With a set of 3 different visualization modes simulated in real scale within a Virtual Environment (VE), and adopting natural human-computer interaction by using speech, the system allows a team of architect and engineers, to visualize and interact with the proposed design during a collaborative design brief. We carried a usability evaluation study with 12 architects. The study showed that the tool was perceived to be effective and its use efficient during the design process, especially during the detailed design phase.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=4129cbae-70c8-11e5-be63-27454208986c
last changed	2022/06/07 07:56

_id	cf2015_484
id	cf2015_484
authors	Liao, Kai; Vries, Bauke de; Kong, Jun and Zhang, Kang
year	2015
title	Pattern, cognition and spatial information processing: Representations of the spatial layout of architectural design with spatial-semantic analytics
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 484.
summary	In this paper, we review and extend the idea of Alexander’s “pattern language”, especially from the viewpoints of complexity theories, information systems, and human-computer interaction, to explore spatial cognition-based design representations for “intelligent and adaptive/interactive environment” in architecture and urban planning. We propose a theoretic framework of design patterns “with spatial information processing”, and attempt to incorporate state-of-the-art computational methods of information visualization/visual analytics into the conventional CAAD approaches. Focused on the spatial-semantic analytics, together with abstract syntactic pattern representation, by using “spatial-semantic aware” graph grammar formalization, i.e., Spatial Graph Grammars (SGG), the relevant models, algorithms and tool are proposed. We testify our theoretic framework and computational tool VEGGIE (a Visual Environment of Graph Grammar Induction Engineering) by using actual architectural design works (spatial layout exemplars of a small office building and the three house projects by Frank Lloyd Wright) as study cases, so as to demonstrate our proposed approach for practical applications. The results are discussed and further research is suggested.
keywords	Pattern language, complex adaptive systems, spatial cognition, design representations, spatial information processing, Artificial Intelligence, visual language, Spatial Graph Grammars (SGG), spatial-semantic analytics.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	sigradi2015_3.385
id	sigradi2015_3.385
authors	Ryberg, Maria Candelária; Storchi, Maurício; Pupo, Regiane; Medeiros, Ivan de
year	2015
title	Digital fabrication as design process tool: connecting design and architecture
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 153-160.
summary	This paper describes a design experience about the insertion of Digital Fabrication, during design process, aiming the study and evaluation how this process can enrich, in a reciprocal way, the interdisciplinarity between Design and Architecture. Using a specific activity of an urban intervention, this article aims to elucidate that the permeability between areas as architecture and Design can bring innovative solutions and clarity during the process, besides the knowledge of different concepts.
keywords	Digital Fabrication, Human Centered Design, Design Process
series	SIGRADI
email
last changed	2016/03/10 09:59

_id	sigradi2021_18
id	sigradi2021_18
authors	Verniz, Debora and Duarte, José P
year	2021
title	Assessing Santa Marta: Using Evaluation Tools to Inform Parametric Urban Design
source	Gomez, P and Braida, F (eds.), Designing Possibilities - Proceedings of the XXV International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2021), Online, 8 - 12 November 2021, pp. 749–758
summary	Lack of affordable housing is a worldwide problem. Rapid urbanization, rural exodus, and poor governance policies have contributed to the problem and, in response, low-income populations resort to self-construction. The result are informal settlements located predominantly in marginalized urban areas (United Nations, 2015) that develop with neither urban infrastructure nor compliance with building and planning codes (Lall et al., 2006; Patel et al., 2018; United Nations Human Settlements Programme, 2012) and, consequently, offer a poor-quality built environment. The goal of this paper is to methodologically identify physical aspects of such built environments that could be improved. We evaluate a case study, the Santa Marta favela in Brazil, using a holistic housing-quality assessment tool and local building and planning codes as reference. Our results identify the physical characteristics with lower quality standards in the case study and demonstrate the efficacy of the methodology introduced for this purpose.
keywords	housing quality assessment, building codes, informal settlements, parametric urban design, Santa Marta favela.
series	SIGraDi
email
last changed	2022/05/23 12:11

_id	caadria2018_016
id	caadria2018_016
authors	Zahedi, Ata and Petzold, Frank
year	2018
title	Utilization of Simulation Tools in Early Design Phases Through Adaptive Detailing Strategies
source	T. Fukuda, W. Huang, P. Janssen, K. Crolla, S. Alhadidi (eds.), Learning, Adapting and Prototyping - Proceedings of the 23rd CAADRIA Conference - Volume 2, Tsinghua University, Beijing, China, 17-19 May 2018, pp. 11-20
doi	https://doi.org/10.52842/conf.caadria.2018.2.011
summary	Decisions taken at early stages of building design have a significant effect on the planning steps for the entire lifetime of the project as well as the performance of the building throughout its lifecycle (MacLeamy 2004). Building Information Modelling (BIM) could bring forward and enhance the planning and decision-making processes by enabling the direct reuse of data hold by the model for diverse analysis and simulation tasks (Borrmann et al. 2015). The architect today besides a couple of simplified simulation tools almost exclusively uses his know-how for evaluating and comparing design variants in the early stages of design. This paper focuses on finding new ways to facilitate the use of analytical and simulation tools during the important early phases of conceptual building design, where the models are partially incomplete. The necessary enrichment and proper detailing of the design model could be achieved by means of dialogue-based interaction concepts with analytical and simulation tools through adaptive detailing strategies. This concept is explained using an example scenario for design process. A generic description of the aimed dialog-based interface to various simulation tools will also be discussed in this paper using an example scenario.
keywords	BIM; Early Design Stages; Adaptive Detailing ; Communication Protocols; Design Variants
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	caadria2017_155
id	caadria2017_155
authors	Cichocka, Judyta Maria, Browne, Will Neil and Rodriguez, Edgar
year	2017
title	Optimization in the Architectural Practice - An International Survey
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 387-396
doi	https://doi.org/10.52842/conf.caadria.2017.387
summary	For several years great effort has been devoted to the study of Architectural Design Optimization (ADO). However, although in the recent years ADO has attracted much attention from academia, optimization methods and tools have had a limited influence on the architectural profession. The aim of the study is to reveal users' expectations from the optimization tools and define limitations preventing wide-spread adaptation of the optimization solvers in the architectural practice. The paper presents the results of the survey "Optimization in the architectural practice" conducted between December 2015 and February 2016 on 165 architectural trainees and practising architects from 34 countries. The results show that there is a need for an interactive multi-objective optimization tool, as 78% respondents declared that a multi-objective optimization is more necessary in their practice than a single objective one and 91% of them acknowledged the need for choice of promising solutions during optimization process. Finally, it has been found that daylight, structure and geometry are three top factors which architects are interested in optimizing.
keywords	Architectural Design Optimization; Optimizaiton Techniques; Generic Solvers; Multi-criteria Decision Making
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2015_12.19
id	sigradi2015_12.19
authors	Hanns, Daniela Kutschat
year	2015
title	Networked and Digitally Based Actions for Citizen-centered Design: Transparency Hacker, a Case Study
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 694-701.
summary	Transpar?ncia Hacker (Transparency Hacker or THacker), a community that promotes a variety of online and offline actions designed to open up public data resources to citizens and to encourage citizens participation in civil rights and law-making. In this paper THacker acts as a case study of projects focused on social innovation within the context of eGovernment, open data and transparency.
keywords	Civic Participation, Transpar?ncia Hacker, Open Data, eGovernment
series	SIGRADI
email
last changed	2016/03/10 09:53

_id	caadria2015_188
id	caadria2015_188
authors	Krakhofer, Stefan and Martin Kaftan
year	2015
title	Augmented Reality Design Decision Support Engine for the Early Building Design Stage
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 231-240
doi	https://doi.org/10.52842/conf.caadria.2015.231
summary	Augmented reality has come a long way and experienced a paradigm shift in 1999 when the ARToolKit was released as open source. The nature of interaction between the physical world and the virtual-world has changed forever. Fortunately for the AECO industry, the transition from traditional Computer Aided Design to virtual building design phrased as Building Information Modeling has created a tremendous potential to adopt Augmented Reality. The presented research is situated in the early design stage of project inception and focuses on supporting informed collective decision-making, characterized by a dynamic back and forth analytical process generating large amounts of data. Facilitation aspects, such as data-collection, storage and access to enable comparability and evaluation are crucial for collective decision-making. The current research has addressed these aspects by means of data accessibility, visualization and presentation. At the core of the project is a custom developed Augmented Reality framework that enables data interaction within the design model. In order to serve as a collaborative decision support engine, the framework also allows multiple models and their datasets to be displayed and exercised simultaneously. The paper demonstrates in the case study the successful application of the AR tool during collaborative design decision meetings.
keywords	Augmented Reality; Design Decision Support; Data Visualization.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	caadria2015_015
id	caadria2015_015
authors	Melenbrink, Nathan and Nathan King
year	2015
title	Fulldome Interfacing
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 221-230
doi	https://doi.org/10.52842/conf.caadria.2015.221
summary	The ability to communicate design intent to potential users, clients, and communities is fundamental to the process of architectural design. Conventionally, this need is addressed through phased submissions of drawings, renderings, animations, and physical models—all with the intention of representing space and its constituent elements. Recent technological advancements however—including tools like those produced by OculusTM—have begun to present new opportunities for spatial representation through the use of simulated 3D environments that are both convenient for the design team and readily accepted by clients and end users. While immersive technologies do present novel representational opportunities, current workflows position the potential at the conclusion of the design process, not as part of it. The project presented here moves beyond mere representation and positions simulated 3D environments within the design process itself. To this end, an integrated real-time computational workflow that enables the use of simulated spatial experience as an iterative design tool was developed in order to create the illusion of being in a space while it is being designed and allowing experientially informed decision making. The Fulldome Interface creates a collaborative immersive environment that utilizes a novel computational design workflow (linking the parametric GrasshopperTM for RhinocerosTM design environment to the Unity3DTM gaming engine) that responds in real-time through dome-based stereoscopic projection that can be experienced by multiple occupants simultaneously.
keywords	Immersive; fulldome; real-time; interface; parametric design
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ecaade2015_122
id	ecaade2015_122
authors	Agirbas, Asli
year	2015
title	The Use of Digital Fabrication as a Sketching Tool in the Architectural Design Process - A Case Study
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 319-324
doi	https://doi.org/10.52842/conf.ecaade.2015.2.319
wos	WOS:000372316000037
summary	Computer-aided manufacturing (CAM) technologies including computer numerically controlled (CNC) milling, laser cutting and 3D printing are becoming cheaper and globally more accessible. Accordingly, many design professionals, academics and students have been able to experience the benefits and challenges of using digital fabrication in their designs. The use of digital fabrication in the education of architecture students has become normal in many schools of architecture, and there is a growing demand for computer-aided manufacturing (CAM) logic and fabrication knowledge in student learning. Clearly, architecture students are acquiring material base-thinking, time management, production methods and various software skills through this digital fabrication. However, it appears to be the case that architecture students use digital fabrication mainly in the final stage of their design or in their finishing work. In this study, computer-aided manufacturing (CAM) technologies have been used as a sketch tool rather than simply for fabricating a final product in the architectural design process and the advantages of this educational practice are demonstrated.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=79005d78-6fe6-11e5-b555-13a7f78815dc
last changed	2022/06/07 07:54

_id	acadia17_102
id	acadia17_102
authors	Aparicio, German
year	2017
title	Data-Insight-Driven Project Delivery: Approach to Accelerated Project Delivery Using Data Analytics, Data Mining and Data Visualization
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 102-109
doi	https://doi.org/10.52842/conf.acadia.2017.102
summary	Today, 98% of megaprojects face cost overruns or delays. The average cost increase is 80% and the average slippage is 20 months behind schedule (McKinsey 2015). It is becoming increasingly challenging to efficiently support the scale, complexity and ambition of these projects. Simultaneously, project data is being captured at growing rates. We continue to capture more data on a project than ever before. Total data captured back in 2009 in the construction industry reached over 51 petabytes, or 51 million gigabytes (Mckinsey 2016). It is becoming increasingly necessary to develop new ways to leverage our project data to better manage the complexity on our projects and allow the many stakeholders to make better more informed decisions. This paper focuses on utilizing advances in data mining, data analytics and data visualization as means to extract project information from massive datasets in a timely fashion to assist in making key informed decisions for project delivery. As part of this paper, we present an innovative new use of these technologies as applied to a large-scale infrastructural megaproject, to deliver a set of over 4,000 construction documents in a six-month period that has the potential to dramatically transform our industry and the way we deliver projects in the future. This paper describes a framework used to measure production performance as part of any project’s set of project controls for accelerated project delivery.
keywords	design methods; information processing; data mining; big data; data visualization
series	ACADIA
email
last changed	2022/06/07 07:55

_id	sigradi2015_sp_3.85
id	sigradi2015_sp_3.85
authors	Balzani, Renan do Nascimento; Silva, Neander Furtado
year	2015
title	The Problem of self-censorship in architectural students and the low cost tree-dimensional printers
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 767-770.
summary	Self-censorship can be observed in architectural students. Due to drawing and development methods of design representation, some students do not create the design they dream about. Believing that you do not have the ability or the technique to represent the ideas on paper or using physical models can cause the self-censorship in the students. The production of physical models is very important for the design thinking and for architectural student’s experience. The tree-dimensional printers can help as a tool to print complex volumetric models or detailed models allowing students to create freely.
keywords	Rapid Prototyping, 3D Printing, Design Theory, Architecture, Self-censorship
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	cf2015_268
id	cf2015_268
authors	Benedetto, Henrique; Kipper, Fabrício A.;Marques, Vinícius and Bruscato, Underléa M.
year	2015
title	Development of Parklets by using parametric modeling
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 268-278.
summary	The lack of urban planning has made the recreation areas increasingly smaller in the cities. Parks and squares gradually gave way to streets and avenues to try to accommodate the growing number of cars and motorcycles. An alternative that tries to balance recreation areas and urban roads was found in the city of San Francisco (USA). Parklets are temporary extensions of urban sidewalks that occupy a few parking spaces. This article aims to demonstrate the potential of parametric modeling in the development of parklets. Thus, anthropometric studies, amount of parking spaces and types of benches were used as input parameters. Rhinoceros and grasshopper programs were used for modeling, while 3D Studio Max was used for rendering. With this study it was possible to verify that when the project is parameterized the processes of creation and modification became faster, reducing design and implementation time.
keywords	Grasshopper algorithm editor, Parametric model, Parklets.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	sigradi2015_sp_10.16
id	sigradi2015_sp_10.16
authors	Bertoldi, Cristiane Aun; Hanns, Daniela Kutschat
year	2015
title	Using Photographs of Physical Models to Visualize Design Opportunities and Problems
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 810-814.
summary	This paper looks at photographic documentation as a resource for detecting errors, identifying possible design principles and providing guidance for the development of student projects in the course AUP2418 – Three Dimensional Models of the undergraduate curriculum at the Faculty of Architecture and Urban Studies at USP in S?o Paulo, Brazil. This article deals with teaching industrial design models and describes the methodological basis adopted. It also offers examples and analyzes the construction and use of models in order to demonstrate the relevance of photographic documentation during the design process.
keywords	Physical Models, Design, Photography, Teaching, FAUUSP
series	SIGRADI
email
last changed	2016/03/10 09:47

For more results click below: