Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 591

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2015_317
id	ecaade2015_317
authors	Cavieres, Andres and Gentry, Russell
year	2015
title	Masonry Regions: A New Approach for the Representation of Masonry Walls in BIM Applications
doi	https://doi.org/10.52842/conf.ecaade.2015.1.585
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 585-595
wos	WOS:000372317300063
summary	The article describes the theoretical approach for the development of computational representations of masonry walls based on the concept of regions. A masonry region is intended to support the description of various levels of detail pertaining to a masonry wall assembly, capturing the evolution and complexity of design information from early conceptual stages down to construction and operation. Since different wall types are characterized by a different set of domain-specific requirements, a special emphasis is put on a flexible strategy for classification of different types of view-dependent masonry regions. This classification will provide the foundation upon which masonry specific parametric modeling and rule-checking applications can be elaborated in the future. It will also provide the basis for the definition of model views necessary for particular data queries and exchanges between design stakeholders. The article introduces the concept of regions, and discusses its implications and future steps.
series	eCAADe
email
last changed	2022/06/07 07:55

_id	cf2015_005
id	cf2015_005
authors	Celani, Gabriela; Sperling, David M. and Franco, Juarez M. S. (eds.)
year	2015
title	Preface
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 5-13.
summary	Since 1985 the Computer-Aided Architectural Design Futures Foundation has fostered high level discussions about the search for excellence in the built environment through the use of new technologies with an exploratory and critical perspective. In 2015, the 16th CAAD Futures Conference was held, for the first time, in South America, in the lively megalopolis of Sao Paulo, Brazil. In order to establish a connection to local issues, the theme of the conference was "The next city". The city of Sao Paulo was torn down and almost completely rebuilt twice, from the mid 1800s to the mid 1900s, evolving from a city built in rammed-earth to a city built in bricks and then from a city built in bricks to a city built in concrete. In the 21st century, with the widespread use of digital technologies both in the design and production of buildings, cities are changing even faster, in terms of layout, materials, shapes, textures, production methods and, above all, in terms of the information that is now embedded in built systems.Among the 200 abstracts received in the first phase, 64 were selected for presentation in the conference and publication in the Electronic Proceedings, either as long or short papers, after 3 tough evaluation stages. Each paper was reviewed by at least three different experts from an international committee of more than 80 highly experienced researchers. The authors come from 23 different countries. Among all papers, 10 come from Latin-American institutions, which have been usually under-represented in CAAD Futures. The 33 highest rated long papers are also being published in a printed book by Springer. For this reason, only their abstracts were included in this Electronic Proceedings, at the end of each chapter.The papers in this book have been organized under the following topics: (1) modeling, analyzing and simulating the city, (2) sustainability and performance of the built environment, (3) automated and parametric design, (4) building information modeling (BIM), (5) fabrication and materiality, and (6) shape studies. The first topic includes papers describing different uses of computation applied to the study of the urban environment. The second one represents one of the most important current issues in the study and design of the built environment. The third topic, automated and parametric design, is an established field of research that is finally becoming more available to practitioners. Fabrication has been a hot topic in CAAD conferences, and is becoming ever more popular. This new way of making design and buildings will soon start affecting the way cities look like. Finally, shape studies are an established and respected field in design computing that is traditionally discussed in CAAD conferences.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	eaea2015_t3_paper08
id	eaea2015_t3_paper08
authors	Fiorino, Donatella Rita; Loddo, Marzia
year	2015
title	Innovative Tools for Knowledge and Management of the Italian Cultural Heritage: SICaR/web and SIGeC/web
source	ENVISIONING ARCHITECTURE: IMAGE, PERCEPTION AND COMMUNICATION OF HERITAGE [ISBN 978-83-7283-681-6],Lodz University of Technology, 23-26 September 2015, pp.348-359
summary	The first step in a valorisation project as well as in a management plan is developing a knowledge scheme. A great amount of data usually remains fragmentary: historical, technical, legal data and diagnostics do not contribute to an integrated and multidisciplinary approach. These sets of problems are particularly pronounced in architectural assets. In order to cope with these needs, the paper illustrates the results of a research dedicated to the identification of strengths and weakness of two important information systems: SIGeC/web and SICaR/web. Both are provided by the Italian Ministry for Cultural Heritage and Tourism (MIBACT). These databases are particularly useful and active tools, to encourage not only the knowledge of Italian heritage, but also their management. Furthermore, it will incline experts from a different background towards unexplored fields and people, who are not expert, in a deeper understanding of the cultural heritage.
keywords	information systems; valorisation; interoperability; defence heritage
series	EAEA
email
last changed	2016/04/22 11:52

_id	cf2015_347
id	cf2015_347
authors	Krakhofer, Stefan
year	2015
title	Closing the Loop: From Analysis to Transformation within BIM
source	The next city - New technologies and the future of the built environment [16th International Conference CAAD Futures 2015. Sao Paulo, July 8-10, 2015. Electronic Proceedings/ ISBN 978-85-85783-53-2] Sao Paulo, Brazil, July 8-10, 2015, pp. 347-357.
summary	The shift from traditional CAD to BIM has created a significant potential to embed optimization processes in many stages of the design. The presented research is situated in the early design stage of inception and concept, focusing on analysis-driven-form-finding during the integrated design approach within a BIM environment. A custom analysis framework, has been developed and linked to a visual programming environment that allows the exchange of data with the parametric components of a BIM environment. The developed workflow and sequential split of functionalities enables a shared design environment for multiple experts and the design-team. The environment is intended to close the loop from analysis to parametric modeling in order to generate and evaluate building designs against performance criteria, with the aim to expedite the design decision process. The prototype has been presented to participants of the Deep-Space Cluster at SmartGeometry 2014.
keywords	Algorithmic Design, Parametric Design, Parametric Analysis, Building Information Modeling, Design Automation.
series	CAAD Futures
email
last changed	2015/06/29 07:55

_id	caadria2015_188
id	caadria2015_188
authors	Krakhofer, Stefan and Martin Kaftan
year	2015
title	Augmented Reality Design Decision Support Engine for the Early Building Design Stage
doi	https://doi.org/10.52842/conf.caadria.2015.231
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 231-240
summary	Augmented reality has come a long way and experienced a paradigm shift in 1999 when the ARToolKit was released as open source. The nature of interaction between the physical world and the virtual-world has changed forever. Fortunately for the AECO industry, the transition from traditional Computer Aided Design to virtual building design phrased as Building Information Modeling has created a tremendous potential to adopt Augmented Reality. The presented research is situated in the early design stage of project inception and focuses on supporting informed collective decision-making, characterized by a dynamic back and forth analytical process generating large amounts of data. Facilitation aspects, such as data-collection, storage and access to enable comparability and evaluation are crucial for collective decision-making. The current research has addressed these aspects by means of data accessibility, visualization and presentation. At the core of the project is a custom developed Augmented Reality framework that enables data interaction within the design model. In order to serve as a collaborative decision support engine, the framework also allows multiple models and their datasets to be displayed and exercised simultaneously. The paper demonstrates in the case study the successful application of the AR tool during collaborative design decision meetings.
keywords	Augmented Reality; Design Decision Support; Data Visualization.
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	caadria2015_065
id	caadria2015_065
authors	Matsubayashi, Michio; and Shun Watanabe
year	2015
title	Generating Schematic Diagrams of MEP Systems from 3D Building Information Models for Use in Conservation
doi	https://doi.org/10.52842/conf.caadria.2015.293
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 293-302
summary	In this paper, we propose a method of generating schematic diagrams from 3D models of mechanical, electrical and plumbing (MEP) systems in order to represent this information in a more traditional, user-friendly format. It can be difficult to grasp the relationships between various MEP elements in building information models (BIM) because they are represented in a visually complex, three-dimensional manner. On the other hand, the relationships between building elements can be easily understood when using traditional schematic diagrams. First, sets of connected elements are extracted from a 3D model of MEP elements using their connection properties. Next, various elements of these systems are identified as nodes and their connections are represented as edges. Finally, these systems are displayed as a schematic diagram using element attribute information.
keywords	BIM; Schematic Diagram; Attribute Information; Graph; Existing Buildings.
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	caadria2015_164
id	caadria2015_164
authors	Mcginley, Tim and Darren Fong
year	2015
title	Designghosts
doi	https://doi.org/10.52842/conf.caadria.2015.365
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 365-374
summary	For architects, a database of typological specific occupant behaviour patterns could help in the design of buildings, through a typological specific insight into the previous use of buildings. In addition, appropriately represented occupant behaviour data in commercial buildings represent an important factor for facilities management (FM) and business information (BI) teams in the assessment the operational performance of the enterprise. Building Information Models (BIM) could provide an appropriate reference for this user data. However the mapping of user behaviour data to the BIM models is unclear. This paper presents a ‘designGhost’ information system to support the mapping of occupant behaviour to BIM models, so that the user data can be represented to the different stakeholders. To test the information system a prototype tool is presented to enable the mapping of the building use (designGhost) data to the building’s spaces in order to support architects in the design stage and to support navigation from an operational (FM/BI) perspective. This paper addressees the challenges of developing such a system and proposes directions for future work.
keywords	Post occupancy evaluation; BIM; visibility graph analysis; designGhost; occupant behaviour; design science; building design and operation.
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	caadria2015_012
id	caadria2015_012
authors	Nakama, Yuki; Yasunobu Onishi and Kazuhisa Iki
year	2015
title	Development of Building Information Management System Using BIM toward Strategic Building Operation and Maintenance
doi	https://doi.org/10.52842/conf.caadria.2015.397
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 397-406
summary	Facility management is aimed at energy saving, increasing the lifespan of buildings, enhancing the satisfaction of facility users and reducing running costs. To that end, it is important to grasp the conditions of the building in detail, and to analyze them one by one in order to execute building operation and maintenance strategically. However, conventional CAFM is insufficient. Therefore, we developed a system (called Building Information Management System) to utilize BIM data made in BIM-CAD on a Web site. We used groupware to support the system and an information platform that enables flexible management of a great variety of maintenance information. In addition, we developed an environmental measurement module and built a structure to sensor information automatically by using a development system. For quality maintenance, detailed information of building operation and maintenance is both from human input and sensors. The proposed method analysis of a building and provides the foundation for strategic control of maintenance.
keywords	BIM, FM, Groupware, Web application, Sensor
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2015_114
id	ecaade2015_114
authors	Roggema, Rob and Nikolay, Popov
year	2015
title	Swarm Planning: Development of Generative Spatial Planning Tool for Resilient Cities
doi	https://doi.org/10.52842/conf.ecaade.2015.1.519
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 1, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 519-527
wos	WOS:000372317300056
summary	In dealing with unexpected impacts of climate change current spatial planning tools are irresponsive and inflexible. The outcomes of applications of these tools are very limited in number, producing static plans that if implemented are very vulnerable to climate hazards. Therefore, an innovative generative tool has been developed to support spatial planning which results in designs that are responsive and adjustable to unexpected, simulated changes. The development of the generative tool is informed by swarm planning theory, and by contemporary generative approaches in urban design and planning. The generative tool is modeled as an Agent-Based System and utilizes versions of the canonical flocking algorithm. The agents are abstract cubical units of space that represent building envelopes. The agents exist and work within an environment that represents a site in terms of topography, land value, and available/buildable land. The agents receive information from the environment and act upon this information. The unexpected climate impact is a simulated flood, which affects both the environment and the agents. The outputs of the tool are generated 'bottom-up' in order to study emergent spatial configurations, as massings of building units.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=205afb0c-7107-11e5-9c2a-17072d6ddcaa
last changed	2022/06/07 07:56

_id	caadria2015_210
id	caadria2015_210
authors	Sweet, Kevin
year	2015
title	Robotic Workflow
doi	https://doi.org/10.52842/conf.caadria.2015.519
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 519-528
summary	While new software interfaces are making the interaction between humans and robots more pedestrian, there is still an extremely complex workflow from the conception of data on the part of humans to the final action of the arm. In order to continue to promote and advance the use of these versatile tools in architecture, pedagogical strategies are needed to better enable users to engage with them quickly and obtain results while minimising frustration. This paper will outline a pedagogical strategy for introducing the multi-layered levels of knowledge and understanding required to operate a 6-axis robotic arm as developed in undergraduate architectural coursework. It will highlight the various learning modules created in order to deliver the necessary information for understanding the complex operational pipeline required to interact with and operate the robotic arm successfully.
keywords	Robots; fabrication; parametric; parametric modelling; simulation.
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	acadia23_v3_19
id	acadia23_v3_19
authors	Dickey, Rachel
year	2023
title	Material Interfaces
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 3: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-1-0]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 24-32.
summary	Based on our current daily rate, 85,410 hours is the average amount of time that an adult in the United States will spend on their phone in a lifetime (Howarth 2023). This is time spent texting, tweeting, emailing, snapping, chatting, posting, and interacting with an interface which each of us carry in our pocket. Kelly Dobson explains, “We psychologically view the cell phone as an extension of our bodies, which is why when you accidentally forget it or leave it behind you feel you have lost apart of yourself” (2013). In reality, this device is just one of many technologies which affect our relationship with our bodies and the physical world. Additionally, Zoom meetings, social media networks, on-line shopping, and delivery robots, all increasingly detach our bodies and our senses from our everyday experiences and interactions. In response to digital culture, Liam Young writes, “Perhaps the day will come when we turn off our target ads, navigational prompts, Tinder match notifications, and status updates to find a world stripped bare, where nothing is left but scaffolds and screens” (2015). Make no mistake; the collection of projects shared in these field notes is intended to be a counterpoint to such a prophesied future. However, the intent is not to try to compete with technology, but rather, to consider the built environment itself as an interface, encouraging interaction through feedback and responsivity directly related to human factors, finding ways to re-engage the body through design.
series	ACADIA
type	field note
email
last changed	2024/04/17 13:59

_id	ecaade2015_269
id	ecaade2015_269
authors	Gago, Ricardo and Romão, Luís
year	2015
title	Geometric Identity of Living Structures Translated to an Architectural Design Process
doi	https://doi.org/10.52842/conf.ecaade.2015.2.591
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 591-600
wos	WOS:000372316000066
summary	Biological life manifests in space through a large diversity of physical structures perfectly bind and identifiable in the environment. This reveals that all share a common generative design process which allows them the same physical identity in all the shapes that generates, The human ecological design process used in architecture is not able yet to reach this design identity neither the spontaneous integration associates to it. Why? Because the geometrical design process used in ecological architecture and living structures are not similar. Thus, this paper proposes, through the identification of some geometrical characteristics from the growth mechanism of living structures, a process of shape generation through shape grammar. With this generation process is possible to generate, only in geometrical terms, a large diversity of architectural models with a common identity, that reveals some geometrical characteristics of spatial integration that living structures share with the surround environment.
series	eCAADe
email
last changed	2022/06/07 07:50

_id	eaea2015_t3_paper02
id	eaea2015_t3_paper02
authors	Acacia, Simonetta; Casanova, Marta
year	2015
title	Recording and Publishing to Ensure Informed Choices for Future Generations
source	ENVISIONING ARCHITECTURE: IMAGE, PERCEPTION AND COMMUNICATION OF HERITAGE [ISBN 978-83-7283-681-6],Lodz University of Technology, 23-26 September 2015, pp.290-298
summary	The paper presents the practical example of an information system applied to the built heritage, in particular to the Albergo dei Poveri, a monumental complex in the city of Genoa. A huge number of data and information have been organized in one database, in order to provide a synthesis of the building, acquainted with its complexity, and at the same time allow an in-depth knowledge; the graphical visualization by means of GIS eases to query the database. The final purpose of this work is to publish the project as a web-GIS that will allow all the interested parts to easily access and consult the wide knowledge and use it to make well-informed decisions about the conservation of built heritage.
keywords	GIS; knowledge; historical building
series	EAEA
email
last changed	2016/04/22 11:52

_id	ecaade2015_138
id	ecaade2015_138
authors	Achten, Henri
year	2015
title	Closing the Loop for Interactive Architecture - Internet of Things, Cloud Computing, and Wearables
doi	https://doi.org/10.52842/conf.ecaade.2015.2.623
source	Martens, B, Wurzer, G, Grasl T, Lorenz, WE and Schaffranek, R (eds.), Real Time - Proceedings of the 33rd eCAADe Conference - Volume 2, Vienna University of Technology, Vienna, Austria, 16-18 September 2015, pp. 623-632
wos	WOS:000372316000069
summary	Interactive architecture occurs in buildings when part of the building engages in exchange of information with the user, in such a way that the interactive system adjusts it's assumptions about the user's needs and desires. Acquiring the user's needs and desires is no trivial task. Currently there are no techniques that will reliably make such assertions. Building a system that unobtrusively monitors the inhabitant seems to be a tall order, and making the system ask the user all the time is very distracting for the user. An alternative option has become available however: personal wearables are increasingly monitoring the user. Therefore it suffices that the interactive system of the building gets in touch with those wearables, rather than duplicating the sensing function of the wearables. The enabling technology for wearables is Internet of Things, which connects physical objects (smart objects) on a virtual level, and Cloud Computing, which provides a scalable storage environment for wearables and smart objects. In this paper we outline the implications of the convergence of these three technologies in the light of interactive architecture.
series	eCAADe
email
more	https://mh-engage.ltcc.tuwien.ac.at/engage/ui/watch.html?id=fdd9e706-6e8f-11e5-b1d4-00190f04dc4c
last changed	2022/06/07 07:54

_id	acadia15_263
id	acadia15_263
authors	Ahlquist, Sean
year	2015
title	Social Sensory Architectures: Articulating Textile Hybrid Structures for Multi-Sensory Responsiveness and Collaborative Play
doi	https://doi.org/10.52842/conf.acadia.2015.263
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 263-273
summary	This paper describes the development of the StretchPLAY prototype as a part of the Social Sensory Surfaces research project, focusing on the design of tactile and responsive environments for children with Autism Spectrum Disorder (ASD). The project is directed specifically at issues with sensory processing, the inability of the nervous system to filter sensory input in order to indicate an appropriate response. This can be referred to as a “traffic jam” of sensory data where the intensity of such unfiltered information leads to an over-intensified sensory experience, and ultimately a dis-regulated state. To create a sensory regulating environments, a tactile structure is developed integrating physical, visual and auditory feedback. The structure is defined as a textile hybrid system integrating a seamless knitted textile to form a continuous topologically complex surface. Advancements in the fabrication of the boundary structure, of glass-fiber reinforced rods, enable the form to be more robustly structured than previous examples of textile hybrid or tent-like structures. The tensioned textile is activated as a tangible interface where sensing of touch and pressure on the surface triggers ranges of visual and auditory response. A specific child, a five-year old girl with ASD, is studied in order to tailor the technologies as a response to her sensory challenges. This project is a collaboration with students, researchers and faculty in the fields of architecture, computer science, information (human-computer interaction), music and civil engineering, along with practitioners in the field of ASD-based therapies.
keywords	Textile Hybrid, Knitting, Sensory Environment, Tangible Interface, Responsive systems and environments
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

_id	caadria2015_202
id	caadria2015_202
authors	Amtsberg, Felix; Felix Raspall and Andreas Trummer
year	2015
title	Digital-Material Feedback in Architectural Design
doi	https://doi.org/10.52842/conf.caadria.2015.631
source	Emerging Experience in Past, Present and Future of Digital Architecture, Proceedings of the 20th International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA 2015) / Daegu 20-22 May 2015, pp. 631-640
summary	This paper studies the architectural potential of the implementation of material feedback using computer vision before and during an automated fabrication process. The combination of an industrial robot and a 3D camera is used expand the typical one-way design and fabrication process (from a digital design to a physical output), to a feedback loop, where specific material information becomes the main trigger of design decisions and fabrication processes. Several projects developed by the authors and tested during a robotic workshop aim to unveil different aspects of material feedback in architectural design, opening a discussion for the benefit and challenges of this new approach to design and fabrication.
keywords	Material feedback; robotic fabrication; computer vision; digital workflow; robotic workshop;
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia17_102
id	acadia17_102
authors	Aparicio, German
year	2017
title	Data-Insight-Driven Project Delivery: Approach to Accelerated Project Delivery Using Data Analytics, Data Mining and Data Visualization
doi	https://doi.org/10.52842/conf.acadia.2017.102
source	ACADIA 2017: DISCIPLINES & DISRUPTION [Proceedings of the 37th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-96506-1] Cambridge, MA 2-4 November, 2017), pp. 102-109
summary	Today, 98% of megaprojects face cost overruns or delays. The average cost increase is 80% and the average slippage is 20 months behind schedule (McKinsey 2015). It is becoming increasingly challenging to efficiently support the scale, complexity and ambition of these projects. Simultaneously, project data is being captured at growing rates. We continue to capture more data on a project than ever before. Total data captured back in 2009 in the construction industry reached over 51 petabytes, or 51 million gigabytes (Mckinsey 2016). It is becoming increasingly necessary to develop new ways to leverage our project data to better manage the complexity on our projects and allow the many stakeholders to make better more informed decisions. This paper focuses on utilizing advances in data mining, data analytics and data visualization as means to extract project information from massive datasets in a timely fashion to assist in making key informed decisions for project delivery. As part of this paper, we present an innovative new use of these technologies as applied to a large-scale infrastructural megaproject, to deliver a set of over 4,000 construction documents in a six-month period that has the potential to dramatically transform our industry and the way we deliver projects in the future. This paper describes a framework used to measure production performance as part of any project’s set of project controls for accelerated project delivery.
keywords	design methods; information processing; data mining; big data; data visualization
series	ACADIA
email
last changed	2022/06/07 07:55

_id	sigradi2015_8.143
id	sigradi2015_8.143
authors	Arcari, Etiene do Amaral; Pereira, Alice Theresinha Cybis; Junior, Roque Costacurta; Mansano, Isadora
year	2015
title	Interoperability: A challenge for the Parameterized Modeling Process of Architectural details and its materialization
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 1 - ISBN: 978-85-8039-135-0] Florianópolis, SC, Brasil 23-27 November 2015, pp. 341-349.
summary	This article describes and analyzes experiments conducted during the development of the master’s work entitled “Parameterized Modeling of Accessibility Design Details: Work Flow In order to have reusability, interoperability and materialization”. Such experiments intended to investigate and verify the potential of interoperability between different architecture software. It was verified the possibility of materialization and reuse of models, where the details worked with a new guise through the context of developing and creating a project in which it was inserted. The difficulties of accessing, sharing and editing data and information were evaluated. The results obtained allowed to identify features and limitations related to the models and their formats.
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	sigradi2015_13.316
id	sigradi2015_13.316
authors	Ariza, Inés; Gazit, Merav
year	2015
title	On-site Robotic Assembly of Double-curved Self-supporting Structures
source	SIGRADI 2015 [Proceedings of the 19th Conference of the Iberoamerican Society of Digital Graphics - vol. 2 - ISBN: 978-85-8039-133-6] Florianópolis, SC, Brasil 23-27 November 2015, pp. 746-753.
summary	Robotic assembly of architectural structures has been an area of research for a few decades. Yet, current methods impose a large number of constraints on the geometry of those structures. In this paper we introduce a method for robotic assembly that enables the construction of double curved self-supporting structures. Latest research challenges have focused on the assembly of sophisticated brick structures and on sensor feedback systems for handling accuracy. We propose an alternative strategy to tackle tolerance handling in complex structures that rely on geometry. The intelligence of the system lies in two main aspects: a subdivision technique that incorporates the robot’s constraints as well as the structural equilibrium of the structure during each step of assembly, in order to omit the use of scaffolding; and a match between geometric information and the robot’s movements in a robot programming environment. As a proof of concept, we fabricated a portion of a full-scale double-curved structure. The structure was assembled without scaffolding by a portable KUKA KR10 on a randomly picked site. This project aims to demonstrate an easy and simple method for robotic assembly that enables the realization of digitally generated complex geometries as concrete complex structures.
keywords	Robotic Assembly, Self-supporting Structure, On-site Assembly, Double Curvature, Construction Tolerances
series	SIGRADI
email
last changed	2016/03/10 09:47

_id	acadia15_357
id	acadia15_357
authors	Ashour, Yassin; Kolarevic, Branko
year	2015
title	Heuristic Optimization in Design
doi	https://doi.org/10.52842/conf.acadia.2015.357
source	ACADIA 2105: Computational Ecologies: Design in the Anthropocene [Proceedings of the 35th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-53726-8] Cincinnati 19-25 October, 2015), pp. 357-369
summary	This paper presents a workflow called the ‘heuristic optimization workflow’ that integrates Octopus, a Multi-Objective Optimization (MOO) engine with Grasshopper3D, a parametric modeling tool, and multiple simulation software. It describes a process that enables the designer to integrate disparate domains via Octopus and complete a feedback loop with the developed interactive, real-time visualization tools. A retrospective design of the Bow Tower in Calgary is used as a test case to study the impact of the developed workflow and tools, as well as the impact of MOO on the performance of the solutions. The overall workflow makes MOO based results more accessible to designers and encourages a more interactive ‘heuristic’ exploration of various geometric and topological trajectories. The workflow also reduces design decision uncertainty and design cycle latency through the incorporation of a feedback loop between geometric models and their associated quantitative data. It is through the juxtaposition of extreme performing solutions that serendipity is created and the potential for better multiple performing solutions is increased.es responsive systems, which focus on the implementation of multi-objective adaptive design prototypes from sensored environments. The intention of the work is to investigate multi-objective criteria both as a material system and as a processing system by creating prototypes with structural integrity, where the thermal energy flow through the prototype, to be understood as a membrane, can be controlled and the visual transparency altered. The work shows performance based feedback systems and physical prototype models driven by information streaming, screening, and application.
keywords	Multi-Objective Optimization, Generative Design, Performance-Based Design
series	ACADIA
type	normal paper
email
last changed	2022/06/07 07:54

For more results click below: