Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 26

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2016_003
id	ascaad2016_003
authors	Al-Jokhadar, Amer; Wassim Jabi
year	2016
title	Humanising the Computational Design Process - Integrating Parametric Models with Qualitative Dimensions
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 9-18
summary	Parametric design is a computational-based approach used for understanding the logic and the language embedded in the design process algorithmically and mathematically. Currently, the main focus of computational models, such as shape grammar and space syntax, is primarily limited to formal and spatial requirements of the design problem. Yet, qualitative factors, such as social, cultural and contextual aspects, are also important dimensions in solving architectural design problems. In this paper, an overview of the advantages and implications of the current methods is presented. It also puts forward a ‘structured analytical system’ that combines the formal and geometric properties of the design, with descriptions that reflect the spatial, social and environmental patterns. This syntactic-discursive model is applied for encoding vernacular courtyard houses in the hot-arid regions of the Middle East and North Africa, and utilising the potentials of these cases in reflecting the lifestyle and the cultural values of the society, such as privacy, human-spatial behaviour, the social life inside the house, the hierarchy of spaces, the segregation and seclusion of family members from visitors and the orientation of spaces. The output of this analytical phase prepares the groundwork for the development of socio-spatial grammar for contemporary tall residential buildings that gives the designer the ability to reveal logical spatial topologies based on socio-environmental restrictions, and to produce alternatives that have an identity while also respecting the context, place and needs of users.
series	ASCAAD
email
last changed	2017/05/25 13:13

_id	ecaade2023_138
id	ecaade2023_138
authors	Crolla, Kristof and Wong, Nichol
year	2023
title	Catenary Wooden Roof Structures: Precedent knowledge for future algorithmic design and construction optimisation
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 611–620
doi	https://doi.org/10.52842/conf.ecaade.2023.1.611
summary	The timber industry is expanding, including construction wood product applications such as glue-laminated wood products (R. Sikkema et al., 2023). To boost further utilisation of engineered wood products in architecture, further development and optimisation of related tectonic systems is required. Integration of digital design technologies in this endeavour presents opportunities for a more performative and spatially diverse architecture production, even in construction contexts typified by limited means and/or resources. This paper reports on historic precedent case study research that informs an ongoing larger study focussing on novel algorithmic methods for the design and production of lightweight, large-span, catenary glulam roof structures. Given their structural operation in full tension, catenary-based roof structures substantially reduce material needs when compared with those relying on straight beams (Wong and Crolla, 2019). Yet, the manufacture of their non-standard geometries typically requires costly bespoke hardware setups, having resulted in recent projects trending away from the more spatially engaging geometric experiments of the second half of the 20th century. The study hypothesis that the evolutionary design optimisation of this tectonic system has the potential to re-open and expand its practically available design solution space. This paper covers the review of a range of built projects employing catenary glulam roof system, starting from seminal historic precedents like the Festival Hall for the Swiss National Exhibition EXPO 1964 (A. Lozeron, Swiss, 1964) and the Wilkhahn Pavilions (Frei Otto, Germany, 1987), to contemporary examples, including the Grandview Heights Aquatic Centre (HCMA Architecture + Design, Canada, 2016). It analysis their structural concept, geometric and spatial complexity, fabrication and assembly protocols, applied construction detailing solutions, and more, with as aim to identify methods, tools, techniques, and construction details that can be taken forward in future research aimed at minimising construction complexity. Findings from this precedent study form the basis for the evolutionary-algorithmic design and construction method development that is part of the larger study. By expanding the tectonic system’s practically applicable architecture design solution space and facilitating architects’ access to a low-tech producible, spatially versatile, lightweight, eco-friendly, wooden roof structure typology, this study contributes to environmentally sustainable building.
keywords	Precedent Studies, Light-weight architecture, Timber shell, Catenary, Algorithmic Optimisation, Glue-laminated timber
series	eCAADe
email
last changed	2023/12/10 10:49

_id	caadria2020_354
id	caadria2020_354
authors	Tomarchio, Ludovica, He, Peijun, Herthogs, Pieter and Tuncer, Bige
year	2020
title	Cultural-Smart City: Establishing New Data-informed Practices to Plan Culture in Cities
source	D. Holzer, W. Nakapan, A. Globa, I. Koh (eds.), RE: Anthropocene, Design in the Age of Humans - Proceedings of the 25th CAADRIA Conference - Volume 2, Chulalongkorn University, Bangkok, Thailand, 5-6 August 2020, pp. 81-90
doi	https://doi.org/10.52842/conf.caadria.2020.2.081
summary	The idea of the Creative City has encouraged planners to develop cultural policies to support creative economies, city branding, urban identity and urban quality. On the other side, the concept of Smart City introduced the possibility to create, collect and analyse data to inform decisions on cities. The two city agendas overlap in different ways, creating a Smart cultural city nexus, that propose similar goals and mixed methodologies, like the possibility to inform planning processes with big data-based technologies. In line with this direction, we introduced conceptual and methodological tools: the first tool is the definition of Hybrid Art Spaces, the second tool is the Singapore Art Maps (SAM), which uses social media data to locate art venues in cities (Tomarchio et al. 2016); the third tool is the Social Media Art Model, which establishes a relationship between social media production and art venues features. While these tools have already shown interesting analytics outcomes (Tomarchio et al. 2016), it is important to validate their utility among practitioners and to set protocols of practices. This paper presents results from semi-structured interviews and a focus group, as a first step towards assessing the usefulness of our three tools for cultural planning practice.
keywords	social media; art; cultural planning; urban planning
series	CAADRIA
email
last changed	2022/06/07 07:58

_id	ascaad2016_048
id	ascaad2016_048
authors	Al Shiekh, Bassam
year	2016
title	Arabic Calligraphy and Parametric Architecture - Translation from a calligraphic force to an architectural form
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 469-482
summary	This paper describes an on-going research that unites two distinct and seemingly unrelated interests. One is Arabic calligraphy and the other is parametric architecture. The effort is to integrate these interests and, in doing so, balance cultural issues with technological ones, traditional with contemporary and spiritual with material. Moreover, this paper is inspired by Arabic calligraphy and its influence on Zaha Hadid’s designs; it is invigorated by parametric systems and their capacity as a source of architectural forms. This paper will observe the rising importance of computation technologies to architecture, which has always been a form of negotiation between ‘function and fiction’ and ‘force and form’. The paper proposes a Parametric Calligraphic Machine that simultaneously produces, connects and separates calligraphic surfaces, calligraphic images and calligraphic reality. Therefore, the goal is to examine this hypothesis in order to produce a set of techniques, tools and methods that inform the three-dimensional design process of Arabic calligraphy’s contemporary possibilities by addressing a process description rather than a state description of creating calligraphic images and calligraphic surfaces. The theoretical approach highlights issues pertaining to calligraphy, spatiality, translation, generative systems, parametric design, visual structure, force and form.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ascaad2016_001
id	ascaad2016_001
authors	Al-Attili, Aghlab; Anastasia Karandinou and Ben Daley
year	2016
title	Parametricism vs Materialism - Evolution of digital technologies for development
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, 597 p.
summary	We build on previous technological developments in CAAD by looking into parametric design exploration and the development of the concept of parametricism. We use the phenomenological backdrop to account for our physical experiences and encounters as well as our mental ones; both evident in the link between parametric design as a process and an outcome. In specific, we previously examined two particular metaphors. The first metaphor addressed aspects of virtual environments that resemble our physical world; In other words, computer model as physical model and digital world as material world. In this volume, we extend the exploration into aspects of virtual environments and their resemblance to physical environments by looking at ‘performance’ aspects: the way in which environments are sensed, measured, tracked and visualised. Moreover, we reflect on matters and materiality in both virtual and physical space philosophically, theoretically, practically and reflectively. The second metaphor looked into the modes and means of interaction between our bodies and such virtual environment. Here we extend the investigation to look at the ways in which measures of environmental performance influence human interaction in real environments. The exploration takes us further to look into the area of design fabrication of the built environment, and methods in which developed processes meet environmental performance requirements, and the innovative outcomes that lead to disruptive technologies getting introduced into design and we revisit parametric design under this focus area.
series	ASCAAD
type	normal paper
email
last changed	2024/02/13 14:28

_id	ascaad2016_052
id	ascaad2016_052
authors	Al-Badry, Sally; Cesar Cheng, Sebastian Lundberg and Georgios Berdos
year	2016
title	Living on the Edge - Reinventing the amphibiotic habitat of the Mesopotamian Marshlands
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 513-526
summary	The Mesopotamian Marshlands form one of the first landscapes where people started to transform and manipulate the natural environment in order to sustain human habitation. For thousands of years, people have transformed natural ecosystems into agricultural fields, residential clusters and other agglomerated environments to sustain long-term settlement. In this way, the development of human society has been intricately linked to the extraction, processing and consumption of natural resources. The Mesopotamian Marshlands, located in one of the hottest and most arid areas on the planet, formed a unique wetlands ecosystem, which apart from millions of people, sustained a very high number of wildlife and endemic species. Several historical, political, social and climatic changes, which densely occurred during the past century, completely destroyed the unique civilisation of the area, made all the wild flora and fauna disappear and forced hundreds of thousands of people to migrate. During the last decade, many efforts have been made to restore the marshlands. However, these efforts are lacking a comprehensive design strategy, coherent goals and deep understanding of the complex current geopolitical situation, making the restoration process an extremely difficult task. This work aims at providing strategies for recovering the Mesopotamian Marshlands, organising productive functions in order to sustain the local population and design a new inhabitation model, using advanced computational tools while taking into account the extreme climatic conditions and several unique cultural aspects. Part of the aim of this work is to advance the use of computation and explore the opportunities that digital tools afford in helping find solutions to complex design problems where various design variables need to be coordinated to satisfy the design goals. Today, advanced computation enables designers to use population consumption demands, ecological processes and environmental inputs as design parameters to develop more robust and resilient regional planning strategies. This work has the double aim of first, presenting a framework for re-inhabiting the Marshlands of Mesopotamia. Second, the work suggests a design methodology based on computer-aided design for developing and organising productive functions and patterns of human occupation in wetland environments.
series	ASCAAD
email
last changed	2017/05/25 13:34

_id	ascaad2016_035
id	ascaad2016_035
authors	Al-Matarneh, Rana; Ihsan Fethi
year	2016
title	Assessing the Impact of CAD Tools on Architectural Design Quality - A case study of graduation projects in Jordan
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 331-350
summary	The current concept of architectural design education in most schools of architecture in Jordan is a blend between manual pen drafting and digital approaches. However, the disconnection between these two methods has resulted in the students' failure to transfer skills learnt through traditional methods to the digital method of CAD. The objective of this study is twofold: to first compare students’ attitudes toward using both methods and to then assess the impact of CAD use on the quality of architectural design. An open-ended questionnaire was designed to measure variables related to students’ preferences toward CAD and traditional methods. The quality of sixty graduation projects at three Jordanian universities was investigated. The results appear to support the assumption that CAD tools are used largely as visual means and thereby cause a marked decline in design quality. These findings call for a reconsideration of the status quo and a rethinking of perhaps the entire architectural educational model.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ecaade2016_063
id	ecaade2016_063
authors	Al-Qattan, Emad, Galanter, Philip and Yan, Wei
year	2016
title	Developing a Tangible User Interface for Parametric and BIM Applications Using Physical Computing Systems.
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 621-630
doi	https://doi.org/10.52842/conf.ecaade.2016.2.621
wos	WOS:000402064400063
summary	This paper discusses the development of an interactive and a responsive Tangible User-Interface (TUI) for parametric and Building Information Modeling (BIM) applications. The prototypes presented in this paper utilizes physical computing systems to establish a flexible and intuitive method to engage digital design processes.The prototypes are hybrid UIs that consist of a digital modeling tool and an artifact. The artifact consists of a control system (sensors, actuators, and microcontrollers) and physical objects (architectural elements). The link between both environments associates physical objects with their digital design information to assist users in the digital design process. The integration of physical computing systems will enable the objects to physically respond to analog input and provide real-time feedback to users. The research aims to foster tangible computing methods to extend the capabilities of digital design tools. The prototypes demonstrate a method that allows architects to simultaneously interact with complex architectural systems digitally and physically.
keywords	Physical Computing; Parametric Design; BIM; Tangible UI
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2021_203
id	ecaade2021_203
authors	Arora, Hardik, Bielski, Jessica, Eisenstadt, Viktor, Langenhan, Christoph, Ziegler, Christoph, Althoff, Klaus-Dieter and Dengel, Andreas
year	2021
title	Consistency Checker - An automatic constraint-based evaluator for housing spatial configurations
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 351-358
doi	https://doi.org/10.52842/conf.ecaade.2021.2.351
summary	The gradual rise of artificial intelligence (AI) and its increasing visibility among many research disciplines affected Computer-Aided Architectural Design (CAAD). Architectural deep learning (DL) approaches are being developed and published on a regular basis, such as retrieval (Sharma et al. 2017) or design style manipulation (Newton 2019; Silvestre et al. 2016). However, there seems to be no method to evaluate highly constrained spatial configurations for specific architectural domains (such as housing or office buildings) based on basic architectural principles and everyday practices. This paper introduces an automatic constraint-based consistency checker to evaluate the coherency of semantic spatial configurations of housing construction using a small set of design principles to evaluate our DL approaches. The consistency checker informs about the overall performance of a spatial configuration followed by whether it is open/closed and the constraints it didn't satisfy. This paper deals with the relation of spaces processed as mathematically formalized graphs contrary to existing model checking software like Solibri.
keywords	model checking, building information modeling, deep learning, data quality
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia23_v1_166
id	acadia23_v1_166
authors	Chamorro Martin, Eduardo; Burry, Mark; Marengo, Mathilde
year	2023
title	High-performance Spatial Composite 3D Printing
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 166-171.
summary	This project explores the advantages of employing continuum material topology optimization in a 3D non-standard lattice structure through fiber additive manufacturing processes (Figure 1). Additive manufacturing (AM) has gained rapid adoption in architecture, engineering, and construction (AEC). However, existing optimization techniques often overlook the mechanical anisotropy of AM processes, resulting in suboptimal structural properties, with a focus on layer-by-layer or planar processes. Materials, processes, and techniques considering anisotropy behavior (Kwon et al. 2018) could enhance structural performance (Xie 2022). Research on 3D printing materials with high anisotropy is limited (Eichenhofer et al. 2017), but it holds potential benefits (Liu et al. 2018). Spatial lattices, such as space frames, maximize structural efficiency by enhancing flexural rigidity and load-bearing capacity using minimal material (Woods et al. 2016). From a structural design perspective, specific non-standard lattice geometries offer great potential for reducing material usage, leading to lightweight load-bearing structures (Shelton 2017). The flexibility and freedom of shape inherent to AM offers the possibility to create aggregated continuous truss-like elements with custom topologies.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	caadria2016_861
id	caadria2016_861
authors	Gero, John S.; Jennifer Shields and Rongrong Yu
year	2016
title	How veridical are different modalities of digital representation? - The effect of presentation modality on physiological response
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 861-870
doi	https://doi.org/10.52842/conf.caadria.2016.861
summary	This paper presents the methodology and results of a pilot study comparing the eye movements of architecture students when looking at different modalities of digital spatial representation. The two participant groups consisted of third and fourth year undergradu- ate architecture students from the University of North Carolina at Charlotte, USA and from Harbin Institute of Technology, Harbin, China. The two modalities studied were a computer-generated line drawn perspective and a digitized photograph of the same architectur- al space. The results of this study show that student designers’ physio- logical response varies with different representation modalities.
keywords	Eye movement: spatial representation; modalities of spatial representation; designers’ physiological response
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	sigradi2016_621
id	sigradi2016_621
authors	Gomes, Maria Cecília Rocha Couto; Santos, Ana Paula Baltazar dos; Arruda, Guilherme Ferreira de; Cabral Filho , José dos Santos; Silva, Luís Henrique Marques de Oliveira; Diniz, Luiza Encarnaç?o; Lima, Mariana Julia Souza Barbosa; Stralen, Mateus de Sousa van
year	2016
title	Parametrizaç?o para além do processo de projeto: experimentando aberturas para interaç?o [Parametrization beyond the design process: trying out openness for interaction]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.790-794
summary	This paper discusses the use of parametrization and digital fabrication in architecture proposing a shift from increasing the architect’s control over the final product (determinist paradigm), towards increasing users' interaction. It presents the design process of an experimental interactive object intended to meet the former discussion and test the limits and difficulties that might arise during the process. Such an object was developed by Lagear (UFMG), as a response to the exhibition Homo Faber: Digital Fabrication in Latin America, CAAD FUTURES 2015.
keywords	Interactive object; Parametrization; Digital Fabrication; Representation; Interaction
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2016_170
id	ecaade2016_170
authors	Hysa, Desantila and Özkar, Mine
year	2016
title	Computation in Early Design Education as Investment in Attitudes
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 357-366
doi	https://doi.org/10.52842/conf.ecaade.2016.1.357
wos	WOS:000402063700040
summary	While education programs are generally defined in terms of learning outcomes known as knowledge, skills and attitudes, it is not always obvious how attitudes are to be gained. This study focuses on the formation of attitudes of accountability and sharing of knowledge in computational approaches to basic design education. We posit that computational thinking, even without computers, is supportive of both the reflective practice and the learning of such values in design education. We report on comparatively observed collaborative design processes of first year architecture students who externalized their thought processes through visual rules. While a reflection-in-action stage helps in learning the know-how, a second reflection on reflection-in-action deepens the understanding and initiates habits for how to think and act within and beyond the design domain, leading to attitude formation.
keywords	design computation; attitudes; visual rules; learning outcomes; foundation design studios
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ecaade2018_p02
id	ecaade2018_p02
authors	Kepczynska-Walczak, Anetta and Martens, Bob
year	2018
title	Digital Heritage - Special Panel Session
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 39-44
doi	https://doi.org/10.52842/conf.ecaade.2018.1.039
summary	According to eCAADe's mission, the exchange and collaboration within the area of computer aided architectural design education and research, while respecting the pedagogical approaches in the different schools and countries, can be regarded as a core activity. The current session follows up on the first Contextualised Digital Heritage Workshop (CDHW) held on the occasion of eCAADe 2016 in Oulu (D. di Mascio et.al.) This event was thought to represent the first of a series of future contextualized digital heritage workshops and hence, the name Oulu interchangeable with the name of any other city or place. The second CDHW took place in the framework of CAADRIA 2017 in Suzhou (D. di Mascio & M.A. Schnabel) and focussed on sharing and dissemination of heritage information and personal experiences, such as narratives.The primary objective for the 2018 digital heritage session is to engage participants in an active discussion, not the longer format presentation of prepared positions. The round table itself is limited to short opening statements so as to ensure time is allowed for viewpoints to be exchanged and for the conference attendees to join in on the issues discussed. The panel will review past practices with the potential for guiding future direction.
keywords	Digital technology; Built heritage; Virtual archeology
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2016_249
id	caadria2016_249
authors	Kuma, Taichi
year	2016
title	Iterative design process between physical modelling and computational simulation for pre-tensioned grid shell structure
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 249-258
doi	https://doi.org/10.52842/conf.caadria.2016.249
summary	Grid shell structures are widely used in many types of buildings. In this paper the author proposes a new grid shell structure, which is pre-tensioned by stretchable membrane. Through iterative process between physical modelling and computational simulation, one pavilion is finally presented as a demonstration of the architectur- al performance of this structure.
keywords	Material computation; form finding; pavilion; grid shell; active bending
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2016_651
id	caadria2016_651
authors	Loh, Paul; Jane. Burry and Malte Wagenfeld
year	2016
title	Workmanship of Risk: continuous designing in digital fabrication
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 651-660
doi	https://doi.org/10.52842/conf.caadria.2016.651
summary	Research projects exploring the realm of digital fabrication have shifted in recent years from developing novel techniques and outcomes to the development of tools that are part of the design pro- cess. The alignment of material systems with digital fabrication tech- nology and tooling processes have led to new terminology such as ‘digital craft’ and ‘digital making’; both terms imply a relationship be- tween craft and digital design and fabrication. Also implied is an inti- mate relationship between material production, digital tools and CNC fabrication techniques; critical ingredients in contemporary design processes. David Pye’s concept of ‘the workmanship of risk’ is used extensively in current discourse as a means to qualify digital fabrica- tion as craft production. This reading of digital fabrication as craft is limited because the word craft is used as an analogy to draw parallels between craft production and digital fabrication. There is a gap in the knowledge of what contemporary craft practice can bring to digital fabrication as a discourse or more precisely, the mechanism that al- lows digital fabrication projects to be read as a form of craft practice. This paper suggests that craft practice is rooted in the relationship be- tween material, tools and technique as an intricate workflow within a project; quantifying risk is just a means to assess this relationship. The workflow however can be considered as autopoietic in nature; it is both self-referential and self-making at the same time as continuously designing.
keywords	Digital craft; digital fabrication; systems theory
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
doi	https://doi.org/10.52842/conf.acadia.2016.140
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	caadria2016_157
id	caadria2016_157
authors	Patrick Janssen, Ruize Li and Akshata Mohanty
year	2016
title	Mobius: A Parametric Modeller for the Web
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 157-166
doi	https://doi.org/10.52842/conf.caadria.2016.157
summary	For complex parametric modelling tasks, systems that use textual programming languages (TPLs) currently have clear ad- vantages over visual programming languages (VPLs) systems. Their support for a rich variety of programming mechanisms means that the complexity of the program can remain commensurate with the com- plexity of the modelling task. A prototype parametric modelling sys- tem called Mo?bius is presented that aims to overcome the limitations of existing VPL systems. The proposed system integrates associative and imperative programming styles and supports iterative looping and higher order functions. In order to demonstrate the versatility of the Mo?bius, a modelling task is presented that requires the model to be modified.
keywords	Parametric procedural modelling; generative design; visu- al programming; human-computer interaction
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	acadia23_v1_220
id	acadia23_v1_220
authors	Ruan, Daniel; Adel, Arash
year	2023
title	Robotic Fabrication of Nail Laminated Timber: A Case Study Exhibition
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 220-225.
summary	Previous research projects (Adel, Agustynowicz, and Wehrle 2021; Adel Ahmadian 2020; Craney and Adel 2020; Adel et al. 2018; Apolinarska et al. 2016; Helm et al. 2017; Willmann et al. 2015; Oesterle 2009) have explored the use of comprehensive digital design-to-fabrication workflows for the construction of nonstandard timber structures employing robotic assembly technologies. More recently, the Robotically Fabricated Structure (RFS), a bespoke outdoor timber pavilion, demonstrated the potential for highly articulated timber architecture using short timber elements and human-robot collaborative assembly (HRCA) (Adel 2022). In the developed HRCA process, a human operator and a human fabricator work alongside industrial robotic arms in a shared working environment, enabling collaborative fabrication approaches. Building upon this research, we present an exploration adapting HRCA to nail-laminated timber (NLT) fabrication, demonstrated through a case study exhibition (Figures 1 and 2).
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	ecaade2024_361
id	ecaade2024_361
authors	Sochùrková, Petra; Devyatkina, Svetlana; Kordová, Sára; Vaško, Imrich; Tsikoliya, Shota
year	2024
title	Bioreceptive Parameters for Additive Manufacturing of Clay based Composites
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 1, pp. 45–54
doi	https://doi.org/10.52842/conf.ecaade.2024.1.045
summary	Due to climate change and the problematic amount of waste and CO2 emissions in the construction industry, non-human organisms and sustainable solutions are key motivators of the study. This paper focuses on developing a bioreceptive (Guillitte, 1995) composite suitable for additive manufacturing, composed to support growth of various organisms. It investigates key properties which have shown to be beneficial for promoting biological growth, such as water absorption, water permeability, humidity, and surface texture. The study evaluates the effect of two groups of clay-based waste additives, wooden sawdust (Arslan, et al., 2021) and sediment material sourced from local tunnel excavation in Prague. Simultaneously the need for intelligent reintegration and waste use is prevalent. Additive fabrication offers the ability to test a variety of composites and (re-)integrate them into the manufacturing processes. Current approach explores how to design artificial environments/skins for greenery and small life with the potential to improve both diversity and survivability while maintaining a better climate in its immediate surroundings. Bioreceptive design has the potential to improve the quality of the urban environment and bring new aesthetic influences into it (Cruz and Beckett 2016, p. 51-64).
keywords	Digital Design, Material Research, Bioreceptive Design, Robotic Fabrication, Additive Manufacturing, Experimental Pastes, Bio compatibility, Waste Materials, Clay Composites
series	eCAADe
email
last changed	2024/11/17 22:05

For more results click below: