Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 585

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2021_151
id	ascaad2021_151
authors	Allam, Samar; Soha El Gohary, Maha El Gohary
year	2021
title	Surface Shape Grammar Morphology to Optimize Daylighting in Mixed-Use Building Skin
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 479-492
summary	Building Performance simulation is escalating towards design optimization worldwide utilizing computational and advanced tools. Egypt has its plan and agenda to adopt new technologies to mitigate energy consumption through various sectors. Energy consumption includes electricity, crude oil, it encompasses renewable and non-renewable energy consumption. Egypt Electricity (EE) consumption by sector percentages is residential (47%), industrial (25%) and commercial (12%), with the remainder used by government, agriculture, public lighting and public utilities (4%). Electricity building consumption has many divisions includes HVAC systems, lighting, Computers and Electronics and others. Lighting share of electricity consumption can vary from 11 to 15 percent in mixed buildings as in our case study which definitely less that the amount used for HVAC loads. This research aims at utilizing shape morphogenesis on facades using geometric shape grammar to enhance daylighting while blocking longwave radiations causing heat stress. Mixed-use building operates in daytime more than night which emphasizes the objective of this study. Results evaluation is referenced to LEED v4.1 and ASHRAE 90.1-2016 window-to-wall ratio calibration and massive wall description. Geometric morphogenesis relies on three main parameters; Pattern (Geometry Shape Grammar: R1, R2, and R3), a reference surface to map from, and a target surface to map to which is the south-western façade of the case study. Enhancing Geo-morph rule is to guarantee flexibility due to the rotation of sun path annually with different azimuth and altitude angles and follow LEED V4.1 enhancements of opaque wall percent for building envelope.
series	ASCAAD
email
last changed	2021/08/09 13:13

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	caadria2019_626
id	caadria2019_626
authors	Hahm, Soomeen, Maciel, Abel, Sumitiomo, Eri and Lopez Rodriguez, Alvaro
year	2019
title	FlowMorph - Exploring the human-material interaction in digitally augmented craftsmanship
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 553-562
doi	https://doi.org/10.52842/conf.caadria.2019.1.553
summary	It has been proposed that, after the internet age, we are now entering a new era of the '/Augmented Age/' (King, 2016). Physician Michio Kaku imagined the future of architects will be relying heavily on Augmented Reality technology (Kaku, 2015). Augmented reality technology is not a new technology and has been evolving rapidly. In the last three years, the technology has been applied in mainstream consumer devices (Coppens, 2017). This opened up possibilities in every aspect of our daily lives and it is expected that this will have a great impact on every field of consumer's technology in near future, including design and fabrication. What is the future of design and making? What kind of new digital fabrication paradigm will emerge from inevitable technological development? What kind of impact will this have on the built environment and industry? FlowMorph is a research project developed in the Bartlett School of Architecture, B-Pro AD with the collaboration of the authors and students as a 12 month MArch programme, we developed a unique design project trying to answer these questions which will be introduced in this paper.
keywords	Augmented Reality, Mixed Reality, Virtual Reality, Design Augmentation, Digital Fabrication, Cognition models, Conceptual Designing, Design Process, Design by Making, Generative Design, Computational Design, Human-Machine Collaboration, Human-Computer Collaboration, Human intuition in digital fabrication
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ecaade2016_129
id	ecaade2016_129
authors	Pak, Burak and Aydemir, Zeynep
year	2016
title	Understanding the Verbal Concepts Appropriated by the Students in the Architectural Design Studio
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 387-394
doi	https://doi.org/10.52842/conf.ecaade.2016.1.387
wos	WOS:000402063700043
summary	The main aim of this study is to gain a better understanding of the role of verbal concepts in the architectural design processes of the students in a studio context. To serve this purpose, we carried out a 15-week studio in an urban architectural masters design studio at KU Leuven Faculty of Architecture. We observed the use of verbal concepts in time during this studio and analyzed the design processes of the students based on their self-report logs on the studio web platform. Based on these, we conducted a statistic analysis and a network mapping study. We found that early concepts provide a starting point for developing fully-fledged specialized design ideas. Furthermore, a higher number of links between concepts indicated their importance during the process. In addition, the data collection and research methods proved to be reliable for mapping the design process of the students as well as revealing the evolution of the ideas in the studio.
keywords	Design Studio; Concepts; Crowdsourcing; Web Platform; Self-reporting; Design Research
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ijac201614101
id	ijac201614101
authors	Webb, Alexander
year	2016
title	Accepting the robotic other: Why real dolls and spambots suggest a near-future shift in architecture’s architecture
source	International Journal of Architectural Computing vol. 14 - no. 1, 6-15
summary	With weak Artificial Intelligence in the pockets of the majority of American adults, a societal introduction of a strong Artificial Intelligence or sentience seems close. Although the “intelligence” of our phones’ intelligence can be laughably brittle, the learning capacity demonstrated by the Internet of Things suggests more robust intelligence is on the way, and some would say it has already arrived. Several private technology firms have asserted that a robust Artificial Intelligence already exists and thought leaders within computation are lining up to ensure that it is not evil. Regardless of the morality of Artificial Intelligence, if our charge as architects is to design occupiable space, then we need to consider post-anthropocentric ecologies as well as how to adapt our design strategies to reflect inclusion of other species. This article describes two linked lines of thought, a meditation on the pending societal inclusion of the robotic other and why that robotic sentience may arrive from an unexpected origin and can reshape how we conceive of architecture itself.
keywords	Artificial Intelligence, Emergent Design, Robots, Digital Communication, Network Models
series	journal
last changed	2016/06/13 08:34

_id	caadria2023_312
id	caadria2023_312
authors	Wu, Fangning
year	2023
title	Assessing Spatial Accessibility to Public Facilities for Vulnerable People towards 15-Minute City in Hong Kong
source	Immanuel Koh, Dagmar Reinhardt, Mohammed Makki, Mona Khakhar, Nic Bao (eds.), HUMAN-CENTRIC - Proceedings of the 28th CAADRIA Conference, Ahmedabad, 18-24 March 2023, pp. 535–544
doi	https://doi.org/10.52842/conf.caadria.2023.1.535
summary	Due to the COVID-19 pandemic, people started to rely more on their communities and attach great importance to the accessibility of public facilities at a hyperlocal level. The 15-Minute City concept, first put forth by Carlos Moreno in 2016, gradually gained popularity worldwide during the age of pandemics. This human-centric concept aims to build complete neighbourhoods that meet the daily needs of residents within 15 minutes by using non-motorized transport. However, few studies focus on vulnerable groups such as children and the elderly for the assessment of 15-Minute City. Therefore, this paper provides an assessment framework for spatial accessibility to public facilities for vulnerable people from the perspective of 15-Minute City. It is measured in three aspects: spatial distribution characteristics, service population ratio and number of facilities through the comparison between Sham Shui Po and Tin Shui Wai in Hong Kong. The result shows that the accessibility to public facilities needed in daily life for children in Sham Shui Po and Tin Shui Wai is relatively reasonable, while the accessibility for the elderly needs to be improved. The research can provide references for evaluating and optimizing spatial planning to promote health and well-being in Hong Kong and other cities.
keywords	15-Minute City, Vulnerable people, Spatial accessibility, Network analysis, Human-centric, New town
series	CAADRIA
email
last changed	2023/06/15 23:14

_id	acadia16_54
id	acadia16_54
authors	Andreen, David; Jenning, Petra; Napp, Nils; Petersen, Kirstin
year	2016
title	Emergent Structures Assembled by Large Swarms of Simple Robots
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 54-61
doi	https://doi.org/10.52842/conf.acadia.2016.054
summary	Traditional architecture relies on construction processes that require careful planning and strictly defined outcomes at every stage; yet in nature, millions of relatively simple social insects collectively build large complex nests without any global coordination or blueprint. Here, we present a testbed designed to explore how emergent structures can be assembled using swarms of active robots manipulating passive building blocks in two dimensions. The robot swarm is based on the toy “bristlebot”; a simple vibrating motor mounted on top of bristles to propel the body forward. Since shape largely determines the details of physical interactions, the robot behavior is altered by carefully designing its geometry instead of uploading a digital program. Through this mechanical programming, we plan to investigate how to tune emergent structural properties such as the size and temporal stability of assemblies. Alongside a physical testbed with 200 robots, this work involves comprehensive simulation and analysis tools. This simple, reliable platform will help provide better insight on how to coordinate large swarms of robots to construct functional structures.
keywords	emergent structures, mechanical intelligence, swarm robotics
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ecaade2016_017
id	ecaade2016_017
authors	Androutsopoulou, Eirini
year	2016
title	Autopoietic Features of the Urban Body's Elements - Similarity studies on network elements' attributes
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 71-78
doi	https://doi.org/10.52842/conf.ecaade.2016.2.071
wos	WOS:000402064400006
summary	The methodology presented in this paper is grounded on the analysis and relational relocation of attributes of the urban body, deriving from the reconstruction of the urban body as a network configuration. In contrast to the hierarchical constructions, network constructions allow for multiple connections between elements, therefore being closer to the complexity of the associative forces found in the structure of the urban body.Similarity function is applied in an attempt to restructure those attributes of the urban body which emerge from the position of each element (node) in relation to other elements of the network and not from the Cartesian topology. Being able to represent material elements as nodes, counter-bodies deriving from autopoietic -network functions emerge, allowing for an inquiry in what concerns the autopoietic features of the urban body in general, focusing on the application of autopoietic functions which generate the urban body parts and components and on the multiplicity of elements' structure, in terms of association of crowds of elements and sets of attributes' values, aiming at the redefinition of proximity as similarity and of remoteness as difference.
keywords	Similarity; Autopoiesis; urban body; Attributes; network; complex systems
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2016_073
id	ecaade2016_073
authors	Borhani, Alireza and Kalantar, Negar
year	2016
title	Material Active Geometry - Constituting Programmable Materials for Responsive Building Skins
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 639-648
doi	https://doi.org/10.52842/conf.ecaade.2016.1.639
wos	WOS:000402063700069
summary	This paper is part of a body of research developing an exploratory dialogue between the built form and the environment, via experimentation with performative geometry and material. Here, geometry is considered a design material with the specific capacity to contribute to the performative aspects and kinetic capabilities of building skins.This work opens with a review of emerging opportunities for architects to design materials. It then discusses the concept of Material Active Geometry (MAG) as a means of designing new properties for existing materials. This is followed by a discussion of MAG principles that inform the concepts of flexibility and rigidity in a 3D-printed textile called Flexible Textile Structure (FTS). This research characterizes two FTS types and discusses their potential to be employed in building skins; it also considers combinatory approaches to computational models and physical prototyping. The work concludes with a discussion of the advantages of using FTS, and provides a trajectory for future research in the field of responsive materials and systems.
keywords	Programmable Material; Material Active Geometry; Flexible Textile Structures; Responsive Building Skins; Flexible yet Rigid
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2017_134
id	ecaade2017_134
authors	Del Signore, Marcella
year	2017
title	pneuSENSE - Transcoding social ecologies
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 2, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 537-544
doi	https://doi.org/10.52842/conf.ecaade.2017.2.537
summary	Cities are continuously produced through entropic processes that mediate between complex networked systems and the immediacy urban life. Emergent media technologies inform new relationships between information and matter, code and space to redefine new urban ecosystems. Modes of perceiving, experiencing and inhabiting cities are radically changing along with a radical transformation of the tools that we use to design. Cities as complex and systemic organisms require approaches that engage new multi-scalar strategies to connect the physical layer with the system of networked ecologies. This paper aims at investigating emerging and novel forms of reading and producing urban spaces reimagining the physical city through intelligent and mediated processes. Through data agency and responsive urban processes, the design methodology explored the materialization of a temporary pneumatic structure and membrane that tested material performance through fabrication and sensing practices through the pneuSENSE project developed in July 2016 in New York at the Brooklyn Navy Yard during the 'HyperCities' IaaC- Institute for Advanced Architecture of Catalonia - Global Summer School.
keywords	responsive urban processes; data agency ; reciprocity between micro (body) and macro (environment); dynamics of social ecologies; mapped-environment
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia16_352
id	acadia16_352
authors	Farahi, Behnaz
year	2016
title	Caress of the Gaze: A Gaze Actuated 3D Printed Body Architecture
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 352-361
doi	https://doi.org/10.52842/conf.acadia.2016.352
summary	This paper describes the design process behind Caress of the Gaze, a project that represents a new approach to the design of a gaze-actuated, 3D printed body architecture—as a form of proto-architectural study—providing a framework for an interactive dynamic design. The design process engages with three main issues. Firstly, it aims to look at form or geometry as a means of controlling material behavior by exploring the tectonic properties of multi-material 3D printing technologies. Secondly, it addresses novel actuation systems by using Shape Memory Alloy (SMA) in order to achieve life-like behavior. Thirdly, it explores the possibility of engaging with interactive systems by investigating how our clothing could interact with other people as a primary interface, using vision-based eye-gaze tracking technologies. In so doing, this paper describes a radically alternative approach not only to the production of garments but also to the ways we interact with the world around us. Therefore, the paper addresses the emerging field of shape-changing 3D printed structures and interactive systems that bridge the worlds of robotics, architecture, technology, and design.
keywords	eye-gaze tracking, interactive design, 3d printing, smart material, programmable matter, embedded responsiveness
series	ACADIA
type	paper
email
last changed	2022/06/07 07:55

_id	ecaade2016_002
id	ecaade2016_002
authors	Ferreira, Maria da Piedade, Kretzer, Andreas, Duarte, José Pinto, Stricker, Didier, Schenkenberger, Benjamin, Weber, Markus and Toyama, Takumi
year	2016
title	De Humani Corporis Fabrica - Fabricating Emotions through Architecture
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 501-507
doi	https://doi.org/10.52842/conf.ecaade.2016.1.501
wos	WOS:000402063700055
summary	This paper describes an experiment that took place as the last day of the elective course "De Humani Corporis Fabrica - Fabricating Emotions through Architecture". The goal of the Experiment was to evaluate the emotional experience of 1:1 scale architectural settings. The Experiment was part of the research for a PhD thesis which describes the relationship between architecture and the body since Vitruvius until the current theories of embodiment. The referred to thesis proposes the incorporation of the corporeal practices of performance art in the teaching of Architecture and combines these with the use of emotion measurement methodologies in order to evaluate the experience of architectural space and design objects during the design process. Psycho-physiological changes in the body's sensory perception during the performances were evaluated through the combined use of biometric technology (e-health platform), a Presence Questionnaire and a SAM chart. The course was attended by 4 students who participated as subjects in the Experiment. The Experiment had the technical support of the DFKI - Deutsches Forschungszentrum für Künstliche Intelligenz, which provided the machinery necessary to collect the biometric data during the Experiment and the knowledge needed to process them.
keywords	Corporeal Architecture; Performance Art; Emotion Measurement; Pedagogy
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2016_507
id	sigradi2016_507
authors	Goldemberg, Eric
year	2016
title	Arquitectura Sónica de Pulsación digital: Dise?o interdisciplinar paramétrico y fabricación digital aplicada a instrumentos musicales e instalaciones sonoras []
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.58-64
summary	This paper proposes to demonstrate the capacity of parametric design and digital fabrication as catalysts for new sensorial experiences, in the context of an approach to the field of experimental design of body architectures. Projects thate architecture and music by means of technological innovations offer new possibilities for artistic productions therefore a new model of inter-disciplinar integration is proposed through this investigation. Through the analysis of this kind of work, new fields of design can be teased out and proposed as manifestations of the expanded field of architecture.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2016_733
id	sigradi2016_733
authors	Guedes, Thiago Matheus Costa; Acosta, Daniel Albernaz; Borda, Adriane; Ferreira, Cristiano Correa; Peronti, Gabriela Gonzalez; Brum, Valentina Toaldo
year	2016
title	Antropoplástico: Desdobramentos em arte a partir do desenho paramétrico e da fabricaç?o digital [Antropoplástico: Developments in art from the parametric design and digital fabrication]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.567-571
summary	The present article represents a series of contextual works started through the collection of a stone. The process occurred during an artistic residency in Argentine Patagonia. This procedural event shows interest in investigating situations of geometrization and scale between body, object and landscape. Resulting of these works from the residency experience I present a research which focuses on an artistic view between the fields of art and architecture.
keywords	Geometrization of landscape; body scale; resonant place; art-architecture
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia16_72
id	acadia16_72
authors	Harrison, Paul
year	2016
title	What Bricks Want: Machine Learning and Iterative Ruin
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 72-77
doi	https://doi.org/10.52842/conf.acadia.2016.072
summary	Ruin has a bad name. Despite the obvious complications, failure provides a rich opportunity—how better to understand a building’s physicality than to watch it collapse? This paper offers a novel method to exploit failure through physical simulation and iterative machine learning. Using technology traditionally relegated to special effects, we can now understand collapse on a granular level: since modern-day physics engines track object-object collisions, they enable a close reading of the spatial preferences that underpin ruin. In the case of bricks, that preference is relatively simple—to fall. By idealizing bricks as rigid bodies, one can understand the effects of gravitational force on each individual brick in a masonry structure. These structures are sometimes able to ‘settle,’ resulting in a stable equilibrium state; in many cases, it means that they will simply collapse. Analyzing ruin in this way is informative, to be sure, but it proves most useful when applied in series. The evolutionary solver described in this paper closely monitors the performance of constituent bricks and ensures that the most successful structures are emulated by later generations. The tool consists of two parts: a user interface for design and the solver itself. Once the architect produces a potential design, the solver performs an evolutionary optimization; after a few hundred iterations, the end result is a structurally sound version of the unstable original. It is hoped that this hybrid of top-down and bottom-up design strategies offers an architecture that is ultimately strengthened by its contingencies.
keywords	rigid body analysis, machine learning, multi-agent structural optimization, sensate systems
series	ACADIA
type	paper
email
last changed	2022/06/07 07:49

_id	ijac201614306
id	ijac201614306
authors	Kuan-Ying, Wu and Hou June-Hao
year	2016
title	Spark Wall: Control responsive environment by human behaviour
source	International Journal of Architectural Computing vol. 14 - no. 3, 255-262
summary	Responsive environment uses human–computer interface to improve how humans experience their surroundings. Many research aimed at different kinds of interactive environment modules with new digital tectonics or computation components. However, those new environments sometimes could be manipulated by components which are less user-friendly and complex than traditional counterparts. In this article, we implemented a real responsive interface – the Spark Wall system, which use 160 actuator modules as our responsive feedback interface and depth camera as sensing input. We built up multi-modal interface for different operating purposes allowing the user to control responsive environment with their behaviour. The user could change his or her body posture to change the pattern of the wall and moreover define touch-input area on any surface. From the user’s perspective, a responsive environment should be a simple system with understandable control modes. A responsive artefact should also be able to dynamically correspond to different methods of operation according to the user’s intentions.
keywords	Responsive environment, human–computer interface, surface computing, multi-modal interface, depth sensing
series	journal
last changed	2016/10/05 08:21

_id	ijac201614407
id	ijac201614407
authors	Miltiadis, Constantinos
year	2016
title	Project anywhere: An interface for virtual architecture
source	International Journal of Architectural Computing vol. 14 - no. 4, 386-397
summary	Virtual and augmented realities open a new world of great potential for spatial research and experimentation by allowing new forms of unbuilt sensible architectural space. This article starts with a sketch of the current context in virtual reality and continues by outlining the development and structure of the research ‘project Anywhere’. The project is an easily deployable, wireless, multi-user, augmented reality app system that offers full body immersion through body, head and hands tracking. It can host multiple concurrent users, able to move freely in the virtual space, by moving in the real and also perform actions through a gesture interface to affect their shared environment. In conclusion, we describe the inherent properties of such a space, which we propose as a novel spatio-temporal medium for architecture that suggests an enriched notion of space for exploration and experimentation, through an example of a potential application.
keywords	Virtual reality, augmented reality, interactive environments, virtual space
series	journal
email
last changed	2016/12/09 10:52

_id	ecaade2016_108
id	ecaade2016_108
authors	Papadopoulou, Athina
year	2016
title	Objects-to-sense-with - Computational Tools for Embodied Spatial Learning
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 367-376
doi	https://doi.org/10.52842/conf.ecaade.2016.1.367
wos	WOS:000402063700041
summary	This paper proposes objects-to-sense-with as tools that provide sensory-based learning of space and expand spatial knowledge beyond merely the formal and visual aspects currently dominant in design discourse. To reintroduce sensory-based learning methods in architecture education, this paper first revisits the sensory pedagogies formulated in the early 20th century, reviews precedents in the arts that utilize body-centered sensing technologies, and reframes previous discussions on the pedagogical role of technologies as tools for thinking. Finally, this paper describes the development of a wearable tool with embedded sensors created by the author and describes how the results are visualized. The developed tool, which is used to record sensory data in-situ by the user and allows for a body-centered representation of space, serves as an example of an object-to-sense-with that can be used to achieve a sensory-based and body-centered understanding of architecture.
keywords	architecture education; design tools; sensor technologies; embodied perception
series	eCAADe
email
last changed	2022/06/07 08:00

_id	acadia16_402
id	acadia16_402
authors	Pinochet, Diego
year	2016
title	Antithetical Colloquy: From operation to interaction in digital fabrication
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 402-411
doi	https://doi.org/10.52842/conf.acadia.2016.402
summary	This paper, introduces a cybernetic approach to digital design and fabrication by embracing aspects of embodied interaction, behavior and communication between designers and machines. To do so, it proposes the use of body gestures, digital/tangible interfaces and Artificial Intelligence to create a more reciprocal way of making. The goal is to present a model of designing and making as a ‘conversation’ instead a mere dialog from creator to executor of a predefined plan to represent an idea. In other words, this paper proposes a platform for interaction between two antithetical worlds—one binary/deterministic and the other perceptual/ambiguous—by focusing in the exploratory aspects of design and embracing aspects of improvisation, ambiguity, imprecision and discovery in the development of an idea.
keywords	compuatational making, computational design, interactive fabrication, digital fabrication
series	ACADIA
type	paper
email
last changed	2022/06/07 08:00

_id	caadria2016_281
id	caadria2016_281
authors	Pinochet, Diego
year	2016
title	Making - Gestures: Continuous design through real time Human Machine interaction
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 281-290
doi	https://doi.org/10.52842/conf.caadria.2016.281
summary	Design is “something that we do” that is related to our unique human condition as creative individuals, so as “making” is related to how we manifest and impress that uniqueness into our surrounding environment. As designers, the way we impress our ideas into the material world is tightly connected to a ‘continuous creative performance’ and with concepts often missing in digital design and fabrication techniques –yet present in analog processes - such as ambiguity, improvisation and imprecision. In this paper, a model of human-machine interaction is proposed, that seeks to transcend the ‘hylomorphic’ model imperative in today’s digital architectural design practice to a more performative and reciprocal form of computational making. By using body gestures and imbuing fabrication machines with behaviour, the research seeks to embrace the concept of ‘performance and error’ as promoters of creativity and cognition about the things we create, installing human as the bond of the interrelations between designing and making.
keywords	Human machine interaction; computational making; machine learning; digital design and fabrication
series	CAADRIA
email
last changed	2022/06/07 08:00

For more results click below: