Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 624

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2016_203
id	ecaade2016_203
authors	Michalatos, Panagiotis and Payne, Andrew
year	2016
title	Monolith: The Biomedical Paradigm and the Inner Complexity of Hierarchical Material Design
doi	https://doi.org/10.52842/conf.ecaade.2016.1.445
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 445-454
wos	WOS:000402063700049
summary	This paper discusses our ongoing research into hierarchical volumetric modeling and the external forces which are motivating a shift from the traditional boundary representation (also known as BREP) that has thus far dominated design software toward a more flexible voxel-based representation capable of describing complex variable material distributions. We present Monolith; a volumetric modelling application which explores hybrid forms of digital representations and new design workflows that extend a designer's ability to describe the material properties of a 3d model at the mesoscopic and even microscopic scales. We discuss the inherent complexities in volumetric modelling and describe the design opportunities which heretofore were unavailable using existing techniques.
keywords	hierarchical materials; multi-material 3d printing; voxels
series	eCAADe
email
last changed	2022/06/07 07:58

_id	caadria2016_797
id	caadria2016_797
authors	Agusti?-Juan, Isolda and Guillaume Habert
year	2016
title	An environmental perspective on digital fabrication in architecture and construction
doi	https://doi.org/10.52842/conf.caadria.2016.797
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 797-806
summary	Digital fabrication processes and technologies are becom- ing an essential part of the modern product manufacturing. As the use of 3D printing grows, potential applications into large scale processes are emerging. The combined methods of computational design and robotic fabrication have demonstrated potential to expand architectur- al design. However, factors such as material use, energy demands, du- rability, GHG emissions and waste production must be recognized as the priorities over the entire life of any architectural project. Given the recent developments at architecture scale, this study aims to investi- gate the environmental consequences and opportunities of digital fab- rication in construction. This paper presents two case studies of classic building elements digitally fabricated. In each case study, the projects were assessed according to the Life Cycle Assessment (LCA) frame- work and compared with conventional construction with similar func- tion. The analysis highlighted the importance of material-efficient de- sign to achieve high environmental benefits in digitally fabricated architecture. The knowledge established in this research should be di- rected to the development of guidelines that help designers to make more sustainable choices in the implementation of digital fabrication in architecture and construction.
keywords	Digital fabrication; LCA; sustainability; environment
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	caadria2016_549
id	caadria2016_549
authors	Fischer, Thomas and Christiane M. Herr
year	2016
title	Parametric Customisation of A 3D Concrete Printed Pavilion
doi	https://doi.org/10.52842/conf.caadria.2016.549
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 549-558
summary	Advances in 3D printing technology have reached architectural scales with 3D concrete printing, a digitally controlled fabrication process in which fibre-reinforced concrete is deposited layer-by-layer to fabricate building elements. In this paper we present a brief overview of key concrete 3D printing related research development efforts, followed by a report on a research project into the parametric online customisation and fabrication of small 3D concrete printed pavilions. The research project is set in, and addresses possibilities and constraints of, the developing local Chinese construction context.
keywords	3D concrete printing; parametric design; digital fabrication; online customisation; China
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	caadria2016_589
id	caadria2016_589
authors	Grigoriadis, Kostas
year	2016
title	Translating Digital to Physical Gradients
doi	https://doi.org/10.52842/conf.caadria.2016.589
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 589-598
summary	As the practice of using notations to translate from two to three-dimensions is becoming superseded by the direct relaying of building information digitally, the separation between designing and building is diminishing. A key aspect in lessening further this divi- sion, is heterogeneous materiality that supersedes component thinking and effectively tectonics. Being an embodiment of the redundancies of tectonic assembly, a curtain wall detail has been redesigned with a heterogeneous and continuous multi-material using CFD. The main research problem following this redesign has been the conversion of material data from the CFD program into a 3D-printable format and in order to achieve a closer linkage between design and building. This has been pursued by initially converting the fused material parameters into fluid weight data and eventually into RGB colour values. The re- sulting configuration was output initially as a multi-colour print and effectively fabricated in a multi-material.
keywords	Multi-materials; CFD; 3D-printing; autography
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	sigradi2016_490
id	sigradi2016_490
authors	Naboni, Roberto; Pezzi, Stefano Sartori
year	2016
title	Embedding auxetic properties in designing active-bending gridshells
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.720-726
summary	Advancements in computational tools are offering designers the possibility to change their relationship with materials. The exploration of auxetic metamaterials, specifically engineered to obtain properties beyond those found in nature, is the promising field examined in this paper. The aim is to define tools and methods in order to design auxetics, and use them to create efficient active-bending structures. By programming their geometry through several parameters, it is possible to finely control curvature and structural resistance. The paper describes an original investigation into the process of programming such structures through the use of combined computational tools.
keywords	Auxetics; Active-Bending; 3D Printing; Computational Design
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	acadia16_332
id	acadia16_332
authors	Retsin, Gilles; Garcia, Manuel Jimenez
year	2016
title	Discrete Computational Methods for Robotic Additive Manufacturing: Combinatorial Toolpaths
doi	https://doi.org/10.52842/conf.acadia.2016.332
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 332-341
summary	The research presented in this paper is part of a larger, emerging body of research into large-scale 3D printing. The research attempts to develop a computational design method specifically for large-scale 3D printing of architecture. Influenced by the concept of Digital Materials, this research is situated within a critical discussion of what fundamentally constitutes a digital object and process. This requires a holistic understanding, taking into account both computational design and fabrication. The intrinsic constraints of the fabrication process are used as opportunities and generative drivers in the design process. The paper argues that a design method specifically for 3D printing should revolve around the question of how to organize toolpaths for the continuous addition or layering of material. Two case-study projects advance discrete methods as efficient ways to compute a continuous printing process. In contrast to continuous models, discrete models allow users to serialize problems and errors in toolpaths. This allows a local optimization of the structure, avoiding the use of global, computationally expensive, problem-solving algorithms. Both projects make use of a voxel-based approach, where a design is generated directly from the combination of thousands of serialized toolpath fragments. The understanding that serially repeated elements can be assembled into highly complex and heterogeneous structures has implications stretching beyond 3D printing. This combinatorial approach for example also becomes highly valuable for construction systems based on modularity and prefabrication.
keywords	prgrammable materials, simulation and design optimization, digital fabrication, big data
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	acadia16_214
id	acadia16_214
authors	Schwartz, Mathew
year	2016
title	Use of a Low-Cost Humanoid for Tiling as a Study in On-Site Fabrication: Techniques and Methods
doi	https://doi.org/10.52842/conf.acadia.2016.214
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 214-223
summary	Since the time architecture and construction began embracing robotics, the pre-fab movement has grown rapidly. As the possibilities for new design and fabrication emerge from creativity and need, the application and use of new robotic technologies becomes vital. This movement has been largely focused on the deployment of industrial-type robots used in the (automobile) manufacturing industry for decades, as well as trying to apply these technologies into off-site building construction. Beyond the pre-fab (off-site) conditions, on-site fabrication offers a valuable next step to implement new construction methods and reduce human work-related injuries. The main challenge in introducing on-site robotic fabrication/construction is the difficulty in calibrating robot navigation (localization) in an unstructured and constantly changing environment. Additionally, advances in robotic technology, similar to the revolution of at-home 3D printing, shift the ownership of modes of production from large industrial entities to individuals, allowing for greater levels of design and construction customization. This paper demonstrates a low-cost humanoid robot as highly customizable technology for floor tiling. A novel end-effector design to pick up tiles was developed, along with a localization system that can be applied to a wide variety of robots.
keywords	humanoid robot, digital fabricaiton, sensate systems
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	sigradi2016_510
id	sigradi2016_510
authors	Tapia, Clara
year	2016
title	Análisis comparativo de prendas y estructuras textiles realizadas por impresión 3D [Comparative analysis of the structures of 3D printed clothes and textiles]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.331-336
summary	This work is an analysis about contemporary 3D printed textiles and clothes. The goal is to facilitate the work of those who want to design clothes by giving them an organized and categorized map of this new features. The categorization it is done by typologies focused into identify the minimum unit of the structures and the way that they grow to build the surfaces. As a conclusion this papers includes a discussion about what is digital fabrication good for, and the possibilities of personalized production.
keywords	3D Printing; Textiles Structures; Fashion; Parametric Design; Personalized Fabrication
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	ascaad2016_017
id	ascaad2016_017
authors	Yazici, Sevil; David J. Gerber
year	2016
title	Prototyping Generative Architecture - Experiments on Multi-Agent Systems, Environmental Performance and 3D Printing
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 145-154
summary	Computational design was developed to solve complex problems in architecture and to enable the establishment of systems with complex properties in a holistic manner. With the enhanced capabilities of computational design, there are possibilities to develop integrated approaches to adapt to multi-faceted design problems. Swarm-based multi-agent systems (MAS) are already used as generative bottom-up methods in various design operations, including form-finding and optimization. This study presents a systematic approach, in which multi-agent systems are informed by the environmental performance assessment data where the output is directly linked to the 3D printing process. The intent is to increase efficiency within the design and prototyping process by integrating performance and fabrication into the early stages of the design process. The proposed method has been applied as a case study to a diverse group of students and professionals. The results have proven that applying this systematic approach enabled the designers to achieve highly sophisticated, formal and organizational outputs, with enhanced spatial and geometric qualities.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	acadia16_298
id	acadia16_298
authors	Yu, Lei; Huang, Yijiang; Zhongyuan, Liu; Xiao, Sai; Liu, Ligang; Song, Guoxian; Wang, Yanxin
year	2016
title	Highly Informed Robotic 3D Printed Polygon Mesh: A Nobel Strategy of 3D Spatial Printing
doi	https://doi.org/10.52842/conf.acadia.2016.298
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 298-307
summary	Though robotic 3D printing technology is currently undergoing rapid development, most of the research and experiments are still based on a bottom up layering process. This paper addresses long term research into a robotic 3D printed polygon mesh whose struts are directly built up and joined together as rapidly generated physical wireframes. This paper presents a novel “multi-threaded” robotic extruder, as well as a technical strategy to create a “printable” polygon mesh that is collision-free during robotic operation. Compared to standard 3D printing, architectural applications demand much larger dimensions at human scale, geometrically lower resolution and faster production speed. Taking these features into consideration, 3D printed frameworks have huge potential in the building industry by combining robot arm technology together with FDM 3D printing technology. Currently, this methodology of rapid prototyping could potentially be applied on pre-fabricated building components, especially ones with uniform parabolic features. Owing to the mechanical features of the robot arm, the most crucial challenge of this research is the consistency of non-stop automated control. Here, an algorithm is employed not only to predict and solve problems, but also to optimize for a highly efficient construction process in coordination of the robotic 3D printing system. Since every stroke of the wireframe contains many parameters and calculations in order to reflect its native organization and structure, this robotic 3D printing process requires processing an intensive amount of data in the back stage.
keywords	interdisciplinary design, craft in design computation, digital fabrication
series	ACADIA
type	paper
email
last changed	2022/06/07 07:57

_id	ascaad2016_014
id	ascaad2016_014
authors	Ahmed, Zeeshan Y.; Freek P. Bos, Rob J.M. Wolfs and Theo A.M. Salet
year	2016
title	Design Considerations Due to Scale Effects in 3D Concrete Printing
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 115-124
summary	The effect of scale on different parameters of the 3D printing of concrete is explored through the design and fabrication of a 3D concrete printed pavilion. This study shows a significant gap exists between what can be generated through computer aided design (CAD) and subsequent computer aided manufacturing (generally based on CNC technology). In reality, the 3D concrete printing on the one hand poses manufacturing constraints (e.g. minimum curvature radii) due to material behaviour that is not included in current CAD/CAM software. On the other hand, the process also takes advantage of material behaviour and thus allows the creation of shapes and geometries that, too, can’t be modelled and predicted by CAD/CAM software. Particularly in the 3D printing of concrete, there is not a 1:1 relation between toolpath and printed product, as is the case with CNC milling. Material deposition is dependent on system pressure, robot speed, nozzle section, layer stacking, curvature and more – all of which are scale dependent. This paper will discuss the design and manufacturing decisions based on the effects of scale on the structural design, printed and layered geometry, robot kinematics, material behaviour, assembly joints and logistical problems. Finally, by analysing a case study pavilion, it will be explore how 3D concrete printing structures can be extended and multiplied across scales and functional domains ranging from structural to architectural elements, so that we can understand how to address questions of scale in their design.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	sigradi2016_564
id	sigradi2016_564
authors	Alló, Leticia; Pazmino, Ana Veronica
year	2016
title	Design de Contrabaixo Elétrico e Aplicaç?o da Prototipagem 3D [Electric Bass Design and Application of 3D Prototyping]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.986-990
summary	The objective of this study is to show the development of a bass with the application of rapid prototyping and manufacturing process. During the development of the product was used Solid Works software to model instrument, which was subsequently embodied in a 3D printer. The article presents the iterative development that involves: test, analyze and improve the prototypes. As a result the article presents a bass model with some requirements such as innovation, customization, acoustics and ergonomics
keywords	Prototyping; Contrabass; 3D printing.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2016_673
id	sigradi2016_673
authors	Baquero, Pablo; Calixto, Victor; Orciuoli, Affonso; Vincent, Charles
year	2016
title	Simulation and prototyping benefits on digital fabrication [Teaching experience on previous workshops]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.981-985
summary	This paper explains how parametric methods are informed by simulation and prototyping, methods that were deployed during some series of digital fabrication workshops, their evolution and specifically with the objective of fabricating using combination of materials and CNC techniques, such as, 3d printing, laser cutting and milling machine. Teaching these workshops were the results of simulating and prototyping with students from the Biodigital Master (ESARQ UIC 2016) and a workshop done during Sigradi (Florianopolis 2015).
keywords	Teaching, 3D printing, Milling, Patterns, Collaboration, Fabrication
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	sigradi2016_724
id	sigradi2016_724
authors	Bomfim, Carlos Alberto Andrade; Lisboa, Bruno Teixeira Wildberger; Matos, Pedro Cesar Correia de
year	2016
title	Gest?o de Obras com BIM – Uma nova era para o setor da Construç?o Civil [Construction Management with BIM – A new era for the Construction sector]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.556-560
summary	The update in the design process associated with a constant search for efficient construction methods, budgets and actual schedules, passes through common terms the planning engineering and constructability, rationalization and integration. This article is based on literature review on the topic and interview with the experience of BIM core of a company in Brazil. BIM involves more than just 3D modeling and is also commonly defined into more dimensions, such as 4D (time), 5D (cost), 6D (the built - operation) and 7D (sustainability). The use of BIM can now be considered a reality that will promote changes to Construction.
keywords	Project Management; Construction Management; Digital Modeling; Design Process; Simulation
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia23_v1_166
id	acadia23_v1_166
authors	Chamorro Martin, Eduardo; Burry, Mark; Marengo, Mathilde
year	2023
title	High-performance Spatial Composite 3D Printing
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 166-171.
summary	This project explores the advantages of employing continuum material topology optimization in a 3D non-standard lattice structure through fiber additive manufacturing processes (Figure 1). Additive manufacturing (AM) has gained rapid adoption in architecture, engineering, and construction (AEC). However, existing optimization techniques often overlook the mechanical anisotropy of AM processes, resulting in suboptimal structural properties, with a focus on layer-by-layer or planar processes. Materials, processes, and techniques considering anisotropy behavior (Kwon et al. 2018) could enhance structural performance (Xie 2022). Research on 3D printing materials with high anisotropy is limited (Eichenhofer et al. 2017), but it holds potential benefits (Liu et al. 2018). Spatial lattices, such as space frames, maximize structural efficiency by enhancing flexural rigidity and load-bearing capacity using minimal material (Woods et al. 2016). From a structural design perspective, specific non-standard lattice geometries offer great potential for reducing material usage, leading to lightweight load-bearing structures (Shelton 2017). The flexibility and freedom of shape inherent to AM offers the possibility to create aggregated continuous truss-like elements with custom topologies.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	acadia20_688
id	acadia20_688
authors	del Campo, Matias; Carlson, Alexandra; Manninger, Sandra
year	2020
title	3D Graph Convolutional Neural Networks in Architecture Design
doi	https://doi.org/10.52842/conf.acadia.2020.1.688
source	ACADIA 2020: Distributed Proximities / Volume I: Technical Papers [Proceedings of the 40th Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 978-0-578-95213-0]. Online and Global. 24-30 October 2020. edited by B. Slocum, V. Ago, S. Doyle, A. Marcus, M. Yablonina, and M. del Campo. 688-696.
summary	The nature of the architectural design process can be described along the lines of the following representational devices: the plan and the model. Plans can be considered one of the oldest methods to represent spatial and aesthetic information in an abstract, 2D space. However, to be used in the design process of 3D architectural solutions, these representations are inherently limited by the loss of rich information that occurs when compressing the three-dimensional world into a two-dimensional representation. During the first Digital Turn (Carpo 2013), the sheer amount and availability of models increased dramatically, as it became viable to create vast amounts of model variations to explore project alternatives among a much larger range of different physical and creative dimensions. 3D models show how the design object appears in real life, and can include a wider array of object information that is more easily understandable by nonexperts, as exemplified in techniques such as building information modeling and parametric modeling. Therefore, the ground condition of this paper considers that the inherent nature of architectural design and sensibility lies in the negotiation of 3D space coupled with the organization of voids and spatial components resulting in spatial sequences based on programmatic relationships, resulting in an assemblage (DeLanda 2016). These conditions constitute objects representing a material culture (the built environment) embedded in a symbolic and aesthetic culture (DeLanda 2016) that is created by the designer and captures their sensibilities.
series	ACADIA
type	paper
email
last changed	2023/10/22 12:06

_id	ecaade2016_191
id	ecaade2016_191
authors	Di Mascio, Danilo, Chiuini, Michele, Fillwalk, John and Pauwels, Pieter
year	2016
title	3D Digital Reconstructions of Lost Buildings - A first critical framing
doi	https://doi.org/10.52842/conf.ecaade.2016.2.511
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 511-520
wos	WOS:000402064400051
summary	This paper presents a first critical framing of 3D digital reconstructions of lost buildings, hence focusing on reconstructions using 3D models. This critical framing is constituted by reflections on definitions, concepts, methodologies and digital technologies. Much experimentation in the digital reconstruction of lost buildings has produced valuable results during the last twenty years, but the variety of methods, software types, and purposes should be reorganized into clear operational protocols to allow sharing of information and collaboration across disciplines. We have therefore investigated the diverse approaches towards digital reconstructions of lost buildings and found that digital reconstructions are not typically aimed at simple visualizations: they are often further developed in virtual environments, information systems and tools for simulations and analysis. In this sense they are not products but instruments for further research and/or heritage conservation. Counter the large number of theoretical positions, methods and tools specific to different disciplines, such as architecture and archaeology, we can find the almost total absence of a comprehensive critical assessment. This paper, which is part of a larger project, intends to open and articulate a debate on how to define, analyze and critically systematize the methodologies for the digital reconstruction of lost buildings.
keywords	Digital reconstruction; lost buildings; 3d modelling; information systems; virtual environments.
series	eCAADe
type	normal paper
email
more	admin
last changed	2022/06/07 07:55

_id	ijac201614201
id	ijac201614201
authors	Dorta, Toma?s; Gokce Kinayoglu and Michael Hoffmann
year	2016
title	Hyve-3D and the 3D Cursor: Architectural co-design with freedom in Virtual Reality
source	International Journal of Architectural Computing vol. 14 - no. 2, 87-102
summary	Hybrid Virtual Environment 3D (Hyve-3D) is a system that allows architectural co-design inside Virtual Reality by a new model of interaction through a 3D cursor. It augments the concept of the cursor to better interact with three- dimensional virtual spaces, rethinking it as a drawing/control plane and viewpoints inside the virtual world. Handheld tablets intuitively manipulate 3D cursors. Users can simultaneously access their individual complementary views on the tablets as personal windows into the shared immersive display. They can concurrently sketch in three dimensions, transform, and manipulate three-dimensional objects using the tablets as tangible props and collectively navigate the scene using the tablet as a 3D trackpad. The system implementation and co-design assessments of different settings are presented.
keywords	Co-design, virtual reality, human-computer interaction, 3D cursor and 3D sketching
series	journal
last changed	2016/06/13 08:34

_id	acadia16_394
id	acadia16_394
authors	Eisinger, Daniel; Putt, Steven
year	2016
title	Formeta 3D: Posthuman Participant Historian
doi	https://doi.org/10.52842/conf.acadia.2016.394
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 394-401
summary	Formeta:3D is a project that engages the posthuman through the development of a machine that translates inputs from its surroundings into physical form in real-time. By responding to interaction with the inhabitants of its environs and incorporating the detected activity in the inflections of the produced form, it has an impact on the activity in the space, resulting in a recursive feedback loop that incorporates the digital, the physical, and the experiential. This paper presents the development of this project in detail, providing a methodology and toolchain for implementing real-time interaction with additive physical form derived from digital inputs and examining the results of an interactive installation set up to test the implementation.
keywords	tool streams, digital fabrication, human-computer interaction, sensate systems
series	ACADIA
type	paper
email
last changed	2022/06/07 07:55

For more results click below: