Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 624

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2021_151
id	ascaad2021_151
authors	Allam, Samar; Soha El Gohary, Maha El Gohary
year	2021
title	Surface Shape Grammar Morphology to Optimize Daylighting in Mixed-Use Building Skin
source	Abdelmohsen, S, El-Khouly, T, Mallasi, Z and Bennadji, A (eds.), Architecture in the Age of Disruptive Technologies: Transformations and Challenges [9th ASCAAD Conference Proceedings ISBN 978-1-907349-20-1] Cairo (Egypt) [Virtual Conference] 2-4 March 2021, pp. 479-492
summary	Building Performance simulation is escalating towards design optimization worldwide utilizing computational and advanced tools. Egypt has its plan and agenda to adopt new technologies to mitigate energy consumption through various sectors. Energy consumption includes electricity, crude oil, it encompasses renewable and non-renewable energy consumption. Egypt Electricity (EE) consumption by sector percentages is residential (47%), industrial (25%) and commercial (12%), with the remainder used by government, agriculture, public lighting and public utilities (4%). Electricity building consumption has many divisions includes HVAC systems, lighting, Computers and Electronics and others. Lighting share of electricity consumption can vary from 11 to 15 percent in mixed buildings as in our case study which definitely less that the amount used for HVAC loads. This research aims at utilizing shape morphogenesis on facades using geometric shape grammar to enhance daylighting while blocking longwave radiations causing heat stress. Mixed-use building operates in daytime more than night which emphasizes the objective of this study. Results evaluation is referenced to LEED v4.1 and ASHRAE 90.1-2016 window-to-wall ratio calibration and massive wall description. Geometric morphogenesis relies on three main parameters; Pattern (Geometry Shape Grammar: R1, R2, and R3), a reference surface to map from, and a target surface to map to which is the south-western façade of the case study. Enhancing Geo-morph rule is to guarantee flexibility due to the rotation of sun path annually with different azimuth and altitude angles and follow LEED V4.1 enhancements of opaque wall percent for building envelope.
series	ASCAAD
email
last changed	2021/08/09 13:13

_id	ascaad2016_027
id	ascaad2016_027
authors	Cocho-Bermejo, Ana
year	2016
title	Time in Adaptable Architecture - Deployable emergency intelligent membrane
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 249-258
summary	The term "Parametricism" widespread mainly by Patrick Schumacher (Schumacher, 2008) is worthy of study. Developing the concept of Human Oriented Parametric Architecture, the need of implementing time as the lost parameter in current adaptive design techniques will be discussed. Morphogenetic processes ideas will be discussed through the principle of an adaptable membrane as a case study. A model implementing a unique Arduino[i] on the façade will control its patterns performance through an Artificial Neural Network that will understand the kind of scenario the building is in, activating a Genetic Algorithm that will optimize the insulation performance of the ETFE pillows. The system will work with a global behavior for façade pattern performance and with a local one for each pillow, giving the option of individual sun-shading control. Machine learning implementation will give the façade the possibility to learn from the efficacy of its decisions through time, eliminating the need of a general on-off behavior.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	caadria2016_219
id	caadria2016_219
authors	Latifi, Mehrnoush; Daniel Prohasky, Jane Burry, Rafael Moya, Jesse Mccarty and Simon Watkins
year	2016
title	Breathing skins for wind modulation through morphology
doi	https://doi.org/10.52842/conf.caadria.2016.219
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 219-228
summary	This study aims to investigate the design power to manipu- late the behaviour and characteristics of air through geometrical ma- nipulation of building skins. The simple cubic cells in the global sys- tem of a porous screen were manipulated to investigate the impacts of screen’s morphology on the air movement pattern within and around it. The results we discovered from the evaluation of several screen systems revealed trends in response to the careful manipulation of ef- fective shape parameters within a designed matrix of variations as a Matrix of Possible Effective Typologies (MPET). In this research, the main principles of framing the initial matrix were based on: a) Creat- ing pressure differences across the screens as a result of surface intru- sion and extrusion compositions. b) Changing the nature of the airflow (velocity and turbulence variation) with geometrical manipulations of the inlet and outlet of the screens’ components. Experimental and nu- merical studies were undertaken in parallel including the use of a wind tunnel with very smooth flow with precision wind sensors and the numerical studies by Computational Fluid Dynamics. The aim of this paper is to present part of the empirical investigations to demonstrate the power of geometry in shaping the air patterns, altering pressure and velocity through geometrical modification of porous surfaces for future applications.
keywords	Porous screens; microturbulance; facade component; microclimate; parametric CFD
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ijac201614309
id	ijac201614309
authors	Yu, Rongrong and John S Gero
year	2016
title	An empirical basis for the use of design patterns by architects in parametric design
source	International Journal of Architectural Computing vol. 14 - no. 3, 289-302
summary	This article presents the results from exploring the impact of using a parametric design tool on designers’ behavior in terms of using design patterns in the early conceptual development stage of designing. It is based on an empirical cognitive study in which eight architectural designers were asked to complete two architectural design tasks with similar complexity, respectively, in a parametric design environment and a geometric modeling environment. The protocol analysis method was employed to study the designers’ behavior. In order to explore the development of design patterns in the empirical data, Markov model analysis is utilized. Through Markov models analysis of the parametric design environment and geometric modeling environment results, it was found that there are some significantly different design patterns being used when designing in a parametric design environment compared to designing in a geometric modeling environment. The article articulates these differences and draws conclusions from these results.
keywords	Design patterns, parametric design, protocol analysis
series	journal
last changed	2016/10/05 08:21

_id	ecaade2016_210
id	ecaade2016_210
authors	Abdelmohsen, Sherif, Massoud, Passaint and Elshafei, Ahmed
year	2016
title	Using Tensegrity and Folding to Generate Soft Responsive Architectural Skins
doi	https://doi.org/10.52842/conf.ecaade.2016.1.529
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 529-536
wos	WOS:000402063700058
summary	This paper describes the process of designing a prototype for a soft responsive system for a kinetic building facade. The prototype uses lightweight materials and mechanisms to generate a building facade skin that is both soft (less dependent on hard mechanical systems) and responsive (dynamically and simultaneously adapting to spatial and environmental conditions). By combining concepts stemming from both tensegrity structures and folding mechanisms, we develop a prototype that changes dynamically to produce varying facade patterns and perforations based on sensor-network data and feedback. We use radiation sensors and shape memory alloys to control the prototype mechanism and allow for the required parametric adaptation. Based on the data from the radiation sensors, the lengths of the shape memory alloys are altered using electric wires and are parametrically linked to the input data. The transformation in the resulting overall surface is directly linked to the desired levels of daylighting and solar exposure. We conclude with directions for future research, including full scale testing, advanced simulation, and multi-objective optimization.
keywords	Soft responsive systems; tensegrity; folding; kinetic facades
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2016_032
id	ascaad2016_032
authors	Alhadidi, Suleiman; Justin Mclean, Luchlan Sharah, Isabel Chia, Roger Sam
year	2016
title	Multiflight - Creating Interactive Stairs through Positive Technology
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 295-308
summary	This paper details a pedagogical project which calls for an improved design performance of the existing built environment through the use of smart technology and data-driven design. The project is an investigation into ways in which to improve the performance of a ‘pre-selected university building’ through the use of a media facade that allows for interactive experiences. Existing problems of the selected building have been identified through observation and research using a rich picture and agile approach. An underutilised staircase was selected as the focus site for a series of computational design and interactive design studies. The brief of this mini-research project aims to encourage more people to use the stairs and create a memorable experience with a technological approach through the application of a site specific interactive media installation. The project is an interactive staircase which utilises LED strips and generative sound. The project features a series of light boxes which are connected to the existing staircase balustrade. Arduino, passive infra-red sensors, and other motion detection sensors were used to allow for light and generative sound interaction with users using visual scripting tools and a generative design platform. Sensing technology was used as a real-time data-gathering device during the site analysis phase as well as an input device for the designed prototype to allow the testing of the data-driven design. This paper details the study and resultant interactive prototypes. It also discusses the exploration of performance based design ideas into design workflows and the integration of sensing tools into the design process. It concludes by identifying possible implications on using the Internet of Things concepts to facilitate the design of interactive architecture.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	caadria2016_343
id	caadria2016_343
authors	Asriana, Nova and Aswin Indraprastha
year	2016
title	Making Sense of Agent-based Simulation: Developing Design Strategy for Pedestrian-centric Urban Space
doi	https://doi.org/10.52842/conf.caadria.2016.343
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 343-352
summary	This study investigates the relationships of field observa- tion, multi-agent simulation and space-syntax theory in spatial config- uration for developing design strategy for a case study, a tourist hub area in Musi Riverside, Palembang. Having such potential advantage and to tackle existing social and urban issues, our study developed a design approach based on multi-agent simulation enhanced by space syntax theory. The goal of this study is a deep understanding of multi agent simulation through mechanism of validation using field obser- vation and by taking into account the existing urban features. The purpose is to develop design strategy of pedestrian-centric urban space to be functioned as a tourist hub based on computational modelling. Following the paths result of pedestrian flow by multi-agents simula- tion, we elaborated the analysis of facility programming by means of Space Syntax theory. It shows the ranking of facility programs based on their relative connectivity and integration. By merging this result, it assembles programs and their circulation spaces by means of compu- tational simulation. Experimenting in both fields show a novel ap- proach for pedestrian-centric design in urban scale, particularly since behavioural models rarely used in early stage of design process. It shows that multi-agent simulation should be coupled with field obser- vation.
keywords	Multi-agents simulation; network analysis; Space Syntax theory; design strategy; urban space
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2016_805
id	sigradi2016_805
authors	Cormack, Jordan; Sweet, Kevin S.
year	2016
title	Parametrically Fabricated Joints: Creating a Digital Workflow
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.412-417
summary	Timber joinery for furniture and architectural purpose has always been identified as a skill or craft. The craft is the demonstration of hand machined skill and precision which is passed down or developed through the iteration of creation and refined reflection. Using digital fabrication techniques provides new, typically unexplored ways of creating and designing joints. It is as if these limitations which bind the ratio of complexity and use are stretched. This means that these joints, from a technical standpoint, can be more advanced than historically hand-made joints as digital machines are not bound by the limitations of the human. The research investigated in this paper explores the ability to create sets of joints in a parametric environment that will be produced with CNC machines, thus redefining the idea of the joint through contemporary tools of creation and fabrication. The research also aims to provide a seamless, digital workflow from the flexible, parametric creation of the joint to the final physical fabrication of it. Traditional joints, more simple in shape and assembly, were first digitally created to ease the educational challenges of learning a computational workflow that entailed the creation and fabrication of geometrically programmed joints. Following the programming and manufacturing of these traditional joints, more advanced and complex joints were created as the understanding of the capabilities of the software and CNC machines developed. The more complex and varied joints were taken from a CAD virtual environment and tested on a 3-axis CNC machine and 3D printer. The transformation from the virtual environment to the physical highlighted areas that required further research and testing. The programmed joint was then refined using the feedback from the digital to physical process creating a more robust joint that was informed by reality.
keywords	Joinery; digital fabrication; parametric; scripting; machining
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2016_415
id	caadria2016_415
authors	Crolla, Kristof and Adam Fingrut
year	2016
title	Protocol of Error: The design and construction of a bending-active gridshell from natural bamboo
doi	https://doi.org/10.52842/conf.caadria.2016.415
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 415-424
summary	This paper advocates alternative methods to overcome the impossibility of realising ‘perfect’ digital designs. It discusses Hong Kong’s 2015 ‘ZCB Bamboo Pavilion’ as a methodological case study for the design and construction of architecture from unprocessed natu- ral bamboo. The paper critically evaluates protocols set up to deal with errors resulting from precise digital design systems merging with inconsistent natural resources and onsite craftsmanship. The paper starts with the geometric and tectonic description of the project, illus- trating a complex and restrictive construction context. Bamboo’s unique growth pattern, structural build-up and suitability as a bending- active material are discussed and Cantonese bamboo scaffolding craftsmanship is addressed as a starting point for the project. The pa- per covers protocols, construction drawings and assembly methods developed to allow for the incorporation and of large building toler- ances and dimensional variation of bamboo. The final as-built 3d scanned structure is compared with the original digital model. The pa- per concludes by discussing the necessity of computational architec- tural design to proactively operate within a field of real-world inde- terminacy, to focus on the development of protocols that deal with imperfections, and to redirect design from the virtual world towards the latent opportunities of the physical.
keywords	Bamboo; bending-active gridshells; physics simulation; form-finding; indeterminacy
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	sigradi2018_1483
id	sigradi2018_1483
authors	Dias Maciel, Sérgio; de Amorim, Arivaldo Leão; de Souza Checcucci, Érica; Bomfim Santos, Kyane
year	2018
title	The creative process in architectural design on a digital environment: an experience with beginner students
source	SIGraDi 2018 [Proceedings of the 22nd Conference of the Iberoamerican Society of Digital Graphics - ISSN: 2318-6968] Brazil, São Carlos 7 - 9 November 2018, pp. 1010-1016
summary	This article presents some results in the architectural design course, which were obtained by under graduate students in two experimental class organized at Federal University of Bahia in 2016 and 2017 years. The class Studio I, with incoming students (2016) and Integrated Digital Studio, with beginners and sophomore students (2017), were planned to have their activities developed in a digital environment, using geometric modeling as the main resource for the architectural design. The results obtained show maturity and autonomy of the students related to architectural designing and the use of digital resources.
keywords	Architectural design; Architectural design teaching; Geometric Modeling; CAAD
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ascaad2016_056
id	ascaad2016_056
authors	Dutt, Florina; Subhajit Das
year	2016
title	Geospatial Tool Evaluating Job Location Mismatch, Based on Available Workforce and Transit Options - Evaluating property location in a city using large-scale datasets
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 557-566
summary	The paper addresses the issue of spatial mismatch of jobs and the accessibility to job locations based on different age, income and industry group. Taking Atlanta as a case study, we developed a geospatial analysis tool enabling developers, the city planning bureau and the residents to identify potential sites of redevelopment with better economic development opportunities. It also aids to find potential location to live with respect to user’s choices for transit options, walkability, job location and proximity to chosen land use. We built our model on a block level in the city, imparting them a score, visualizing the data as a heat map. The metrics to compute the score included proximity to job, proximity to worker’s residence, transit availability, walkability and number of landmark elements near the site. We worked with Longitudinal Employer-Household Dynamics (LEHD) Data along with residence area characteristics (RAC) and work place area characteristic (WAC) data sets, where the total number of data-points was over 3 million. It was challenging for us to optimize computation such that the prototype performs statistical analysis and updates visualization in real time. The research further is prototyped as a web application leveraging Leaflet’s Open Street Maps API and D3 visualization plugin. The research showed that there is a high degree of spatial mismatch between home and job locations with very few jobs with driving distance within 5 -10 miles with limited transit options in Atlanta. Further, it showed that low-earning workers need to travel significantly larger distance for work compared to higher class.
series	ASCAAD
email
last changed	2017/05/25 13:34

_id	sigradi2016_779
id	sigradi2016_779
authors	Granero, Adriana Edith; Paganini, Ana Livia; Hölzel, Gabriel
year	2016
title	Creación asistida por tecnología [Assisted creation by technology]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.285-289
summary	This research explores the integration and use of applications, digital devices and social networks for the creation of architectural design. We propose a teaching model for teaching morphological architectural representation with different models but integrated. On the study will show the sequence of activities linked to the different models and work on them. For activity using social networks of all kinds, the implementation of 3D printing peripherals, the use of own design uses three significant companies are encouraged: Autodesk, Graphisoft & Mc. Neel.
keywords	Natural education, interaction, educational innovation, Gamefulness, architectural education, higher education
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2016_243
id	ecaade2016_243
authors	Gül, Leman Figen and Hal?c?, Süheyla Müge
year	2016
title	Collaborative Design with Mobile Augmented Reality
doi	https://doi.org/10.52842/conf.ecaade.2016.1.493
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 493-500
wos	WOS:000402063700054
summary	In early design process, designers employ several media for externalizations of their design ideas which facilitate decision making, discussion and evaluation. Especially models are the most common representation tools and are used generally to understand and make spatial reasoning on the design ideas. Besides the traditional methods, today, the technological developments bring new ways for collaboration and design in 3D; the mobile augmented reality (MAR) technology is one of them. MAR is augmented reality technology which is provided by mobile devices. This study focuses on the early design process of collaborative designers' communication when they are working with the MAR technology. We developed a MAR environment for designers, and conducted an experiment to understand the key elements of the interaction of the designers with the interface. The communication and interaction of the designers are analyzed using the protocol analysis method. The results show that the MAR technology supports the co-design activities encouraging the designers to manipulate the created artefact. The results of the study would be indicative for future studies.
keywords	collaborative design; mobile augmented reality; protocol analysis
series	eCAADe
email
last changed	2022/06/07 07:50

_id	ascaad2016_010
id	ascaad2016_010
authors	Harnomo Fajar I.; Aswin Indraprastha
year	2016
title	Computational Weaving Grammar of Traditional Woven Pattern
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 75-84
summary	Weaving technique is one of the indigenous craftsmanship practices that are common in most of ethnic groups in Indonesia. Generally, it uses thin strips of organic material such as bamboo or rattan to make plane of surface that further can be developed into daily utensils or as a traditional architectural building components such as partition wall and floor. The research of weaving grammar as a system and process had been introduced and explored using Shape Grammar theory and principles. Having the potential implementation and to preserve the traditional weaving method, the grammar can be explored as a method of exploration in architectural design by extending the computation method based on the visual embedding of its pattern languages. The aim of the study is to discover the geometrical configuration underlied traditional weaving grammar by reconfiguring and elaborating procedures and further develop generative method using computational approach. We focused on the exploration of single and dual patterns of biaxial types of West Java woven pattern by using shape grammar principles. The result shows computational method is constructed by several rules which are defined as generative procedure. The result advised that traditional woven pattern has similarity according to its ruled-based system of generative algorithm.
series	ASCAAD
email
last changed	2017/05/25 13:13

_id	caadria2024_186
id	caadria2024_186
authors	Huang, Jingfei and Tu, Han
year	2024
title	Inconsistent Affective Reaction: Sentiment of Perception and Opinion in Urban Environments
doi	https://doi.org/10.52842/conf.caadria.2024.2.395
source	Nicole Gardner, Christiane M. Herr, Likai Wang, Hirano Toshiki, Sumbul Ahmad Khan (eds.), ACCELERATED DESIGN - Proceedings of the 29th CAADRIA Conference, Singapore, 20-26 April 2024, Volume 2, pp. 395–404
summary	The ascension of social media platforms has transformed our understanding of urban environments, giving rise to nuanced variations in sentiment reaction embedded within human perception and opinion, and challenging existing multidimensional sentiment analysis approaches in urban studies. This study presents novel methodologies for identifying and elucidating sentiment inconsistency, constructing a dataset encompassing 140,750 Baidu and Tencent Street view images to measure perceptions, and 984,024 Weibo social media text posts to measure opinions. A reaction index is developed, integrating object detection and natural language processing techniques to classify sentiment in Beijing Second Ring for 2016 and 2022. Classified sentiment reaction is analysed and visualized using regression analysis, image segmentation, and word frequency based on land-use distribution to discern underlying factors. The perception affective reaction trend map reveals a shift toward more evenly distributed positive sentiment, while the opinion affective reaction trend map shows more extreme changes. Our mismatch map indicates significant disparities between the sentiments of human perception and opinion of urban areas over the years. Changes in sentiment reactions have significant relationships with elements such as dense buildings and pedestrian presence. Our inconsistent maps present perception and opinion sentiments before and after the pandemic and offer potential explanations and directions for environmental management, in formulating strategies for urban renewal.
keywords	Urban Sentiment, Affective Reaction, Social Media, Machine Learning, Urban Data, Image Segmentation.
series	CAADRIA
email
last changed	2024/11/17 22:05

_id	acadia16_130
id	acadia16_130
authors	Koschitz, Duks; Ramagosa, Bernat; Rosenbaum, Eric
year	2016
title	Beetle Blocks: A New Visual Language for Designers and Makers
doi	https://doi.org/10.52842/conf.acadia.2016.130
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 130-139
summary	We are introducing a new teaching tool to show designers, architects, and artists procedural ways of constructing objects and space. Computational algorithms have been used in design for quite some time, but not all tools are very accessible to novice programmers, especially undergraduate students. ‘Beetle Blocks’ (beetleblocks.com) is a software environment that combines an easy-to-use graphical programming language with a generative model for 3D space, drawing on ‘turtle geometry,’ a geometry paradigm introduced by Abelson and Disessa, that uses a relative as opposed to an absolute coordinate system. With Beetle Blocks, designers are able to learn computational concepts and use them for their designs with more ease, as individual computational steps are made visually explicit. The beetle, the relative coordinate system, follows instructions as it moves about in 3D space. Anecdotal evidence from studio teaching in undergraduate programs shows that despite the early introduction of digital media and tools, architecture students still struggle with learning formal languages today. Beetle Blocks can significantly simplify the teaching of complex geometric ideas and we explain how this can be achieved via several examples. The blocks-based programming language can also be used to teach fundamental concepts of manufacturing and digital fabrication and we elucidate in this paper which possibilities are conducive for 2D and 3D designs. This project was previously implemented in other languages such as Flash, Processing and Scratch, but is now developed on top of Berkeley’s ‘Snap!’
keywords	generative design, design pedagogy, digital fabrication, tool-building, pedagogical tools
series	ACADIA
type	paper
email
last changed	2022/06/07 07:51

_id	ijac201614306
id	ijac201614306
authors	Kuan-Ying, Wu and Hou June-Hao
year	2016
title	Spark Wall: Control responsive environment by human behaviour
source	International Journal of Architectural Computing vol. 14 - no. 3, 255-262
summary	Responsive environment uses human–computer interface to improve how humans experience their surroundings. Many research aimed at different kinds of interactive environment modules with new digital tectonics or computation components. However, those new environments sometimes could be manipulated by components which are less user-friendly and complex than traditional counterparts. In this article, we implemented a real responsive interface – the Spark Wall system, which use 160 actuator modules as our responsive feedback interface and depth camera as sensing input. We built up multi-modal interface for different operating purposes allowing the user to control responsive environment with their behaviour. The user could change his or her body posture to change the pattern of the wall and moreover define touch-input area on any surface. From the user’s perspective, a responsive environment should be a simple system with understandable control modes. A responsive artefact should also be able to dynamically correspond to different methods of operation according to the user’s intentions.
keywords	Responsive environment, human–computer interface, surface computing, multi-modal interface, depth sensing
series	journal
last changed	2016/10/05 08:21

_id	ecaade2016_136
id	ecaade2016_136
authors	Kwiecinski, Krystian, Santos, Filipe, Almeida, Ana de, Taborda, Bruno and Eloy, Sara
year	2016
title	Wood Mass-Customized Housing - A dual computer implementation design strategy
doi	https://doi.org/10.52842/conf.ecaade.2016.2.349
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 349-358
wos	WOS:000402064400034
summary	This paper reports our current research on automatic generation of houses layouts according to future inhabitant's requirements. For that generation we propose the use of a design method based on shape grammars that encodes light wood frame construction guidelines. Two different implementations for the design system are presently under development. One based on shape grammars supplemented with procedural knowledge and another using a genetic algorithm. Both implementations allow the generation of house layouts that fulfill both the user requirements and the design language.
keywords	shape grammar; genetic algorithm; computer implementation
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2016_455
id	sigradi2016_455
authors	Martinez, Andressa Carmo Pena; Santos, Denise Mônaco dos; Souza, Douglas Lopes de; Castriotto, Caio Magalh?es
year	2016
title	O estudo das operaç?es formais no processo de projeto do arquiteto Peter Eisenman [The study of formal tools in Peter Eisenman's design process]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.715-719
summary	This paper presents part of the research on the study of formal operations in Peter Eisenman's design process. The initial hypothesis is the possibility of translating the architect's design process and his formal tools, into a shape grammar, in selected works. In this sense, the research aims to simulate these formal tools through digital models, analyze the variations in the Diagram of Interiority and Exteriority phases; understand the design process using Rhinoceros software and its interaction with grasshopper, in search of the decoding and interpretation of a system of rules implicit in the architect's design process.
keywords	Diagrams; Design Process; Formal tools; Shape Grammars; Peter Eisenman
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2016_809
id	caadria2016_809
authors	Nakapan, Walaiporn
year	2016
title	Using the SAMR Model to transform mobile learning in a History of Art and Architecture Classroom
doi	https://doi.org/10.52842/conf.caadria.2016.809
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 809-818
summary	This paper presents the progress of a pilot classroom, which uses mobile devices to enhance instructor-student classroom interac- tions and students’ learning of the History of Art and Architecture. The main objective of this research was to find a way of improving classroom activities, for the coming year, by making the best possible use of technology to enable students to learn more successfully and improve their understanding of the lesson content. In this paper, class- room activities during 2014 and 2015 are analysed using the SAMR Model coupled with Bloom’s revised taxonomy and the EdTech Quin- tet Model. In addition, a plan for the redesign and improvement of ac- tivities in 2016 is proposed, the effectiveness of the SAMR model at improving in class activities is discussed and a perspective on how to develop the classroom using the “SAMR ladder” is included. The re- sults show that in 2015, 25% of the students in the class achieved an A grade, and less than 5% were graded F compared to 26% in 2012.
keywords	Design education; mobile-based learning; History of Art and Architecture; SAMR model
series	CAADRIA
email
last changed	2022/06/07 07:59

For more results click below: