Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 619

Reformat results as: short short into frame detailed detailed into frame

_id	acadia18_404
id	acadia18_404
authors	Clifford, Brandon; McGee, Wes
year	2018
title	Cyclopean Cannibalism. A method for recycling rubble
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 404-413
doi	https://doi.org/10.52842/conf.acadia.2018.404
summary	Each year, the United States discards 375 million tons of concrete construction debris to landfills (U.S. EPA 2016), but this is a new paradigm. Past civilizations cannibalized their constructions to produce new architectures (Hopkins 2005). This paper interrogates one cannibalistic methodology from the past known as cyclopean masonry in order to translate this valuable method into a contemporary digital procedure. The work contextualizes the techniques of this method and situates them into procedural recipes which can be applied in contemporary construction. A full-scale prototype is produced utilizing the described method; demolition debris is gathered, scanned, and processed through an algorithmic workflow. Each rubble unit is then minimally carved by a robotic arm and set to compose a new architecture from discarded rubble debris. The prototype merges ancient construction thinking with digital design and fabrication methodologies. It poses material cannibalism as a means of combating excessive construction waste generation.
keywords	full paper, cyclopean, algorithmic, robotic fabrication, stone, shape grammars, computation
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	ecaade2021_203
id	ecaade2021_203
authors	Arora, Hardik, Bielski, Jessica, Eisenstadt, Viktor, Langenhan, Christoph, Ziegler, Christoph, Althoff, Klaus-Dieter and Dengel, Andreas
year	2021
title	Consistency Checker - An automatic constraint-based evaluator for housing spatial configurations
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 351-358
doi	https://doi.org/10.52842/conf.ecaade.2021.2.351
summary	The gradual rise of artificial intelligence (AI) and its increasing visibility among many research disciplines affected Computer-Aided Architectural Design (CAAD). Architectural deep learning (DL) approaches are being developed and published on a regular basis, such as retrieval (Sharma et al. 2017) or design style manipulation (Newton 2019; Silvestre et al. 2016). However, there seems to be no method to evaluate highly constrained spatial configurations for specific architectural domains (such as housing or office buildings) based on basic architectural principles and everyday practices. This paper introduces an automatic constraint-based consistency checker to evaluate the coherency of semantic spatial configurations of housing construction using a small set of design principles to evaluate our DL approaches. The consistency checker informs about the overall performance of a spatial configuration followed by whether it is open/closed and the constraints it didn't satisfy. This paper deals with the relation of spaces processed as mathematically formalized graphs contrary to existing model checking software like Solibri.
keywords	model checking, building information modeling, deep learning, data quality
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2016_055
id	ascaad2016_055
authors	Barbouche, Rached
year	2016
title	Modeling Decorative Forms and Design Knowledge
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 547-556
summary	Form analysis in architecture is a method to increase knowledge of human made objects, by observation and description. Modeling attempts to identify characteristics carried by these objects and the rules of their production. Two approaches are relevant here. The first concerns the analysis and modeling of an object corpus (decors worn by windows), belonging to colonial architecture of Tunis from the late 19th to early 20th century and the second deals from a GIS, storing and mapping the forms variation, taken on the analyzed objects. The set allows developing tools for decision support, used not only in the description of a corpus, but also ultimately to lead to the architectural and stylistic classification of the city buildings.
series	ASCAAD
email
last changed	2017/05/25 13:34

_id	acadia16_154
id	acadia16_154
authors	Brugnaro, Giulio; Baharlou, Ehsan; Vasey, Lauren; Menges, Achim
year	2016
title	Robotic Softness: An Adaptive Robotic Fabrication Process for Woven Structures
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 154-163
doi	https://doi.org/10.52842/conf.acadia.2016.154
summary	This paper investigates the potential of behavioral construction strategies for architectural production through the design and robotic fabrication of three-dimensional woven structures inspired by the behavioral fabrication logic used by the weaverbird during the construction of its nest. Initial research development led to the design of an adaptive robotic fabrication framework composed of an online agent-based system, a custom weaving end-effector and a coordinated sensing strategy utilizing 3D scanning.The outcome of the behavioral weaving process could not be predetermined a priori in a digital model, but rather emerged out of the negotiation among design intentions, fabrication constraints, performance criteria, material behaviors and specific site conditions. The key components of the system and their role in the fabrication process are presented both theoretically and technically, while the project serves as a case study of a robotic production method envisioned as a soft system: a flexible and adaptable framework in which the moment of design unfolds simultaneously with fabrication, informed by a constant flow of sensory information.
keywords	soft systems, agent-based systems, robotic fabrication, sensate systems
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	caadria2016_125
id	caadria2016_125
authors	Chen, I-Chih and June-Hao Hou
year	2016
title	Design with bamboo bend: Bridging natural material and computational design
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 125-133
doi	https://doi.org/10.52842/conf.caadria.2016.125
summary	Bamboo is a high potential alternative solution for substi- tuting industrial material with its natural characteristics, economical and environmental aspects. However, one of the biggest challenges for natural materials to be used in computational designed is the control- lability due to its unevenness nature. The other gap is the lack of ma- terial parameters that might be bridged by analysing data acquired from conventional tests. This research studied the raw bamboo strip and its natural forming from bending, by using sampling points and curvature reconstruction. The parametric models of bamboo strips were then constructed to represent its material behaviours for form prediction, material selection, and simulation in parametric design. It also serves as an assistive method for material selection when crafting with bamboo bend.
keywords	Bamboo; bending; material computation; digital crafting
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ecaade2023_138
id	ecaade2023_138
authors	Crolla, Kristof and Wong, Nichol
year	2023
title	Catenary Wooden Roof Structures: Precedent knowledge for future algorithmic design and construction optimisation
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 611–620
doi	https://doi.org/10.52842/conf.ecaade.2023.1.611
summary	The timber industry is expanding, including construction wood product applications such as glue-laminated wood products (R. Sikkema et al., 2023). To boost further utilisation of engineered wood products in architecture, further development and optimisation of related tectonic systems is required. Integration of digital design technologies in this endeavour presents opportunities for a more performative and spatially diverse architecture production, even in construction contexts typified by limited means and/or resources. This paper reports on historic precedent case study research that informs an ongoing larger study focussing on novel algorithmic methods for the design and production of lightweight, large-span, catenary glulam roof structures. Given their structural operation in full tension, catenary-based roof structures substantially reduce material needs when compared with those relying on straight beams (Wong and Crolla, 2019). Yet, the manufacture of their non-standard geometries typically requires costly bespoke hardware setups, having resulted in recent projects trending away from the more spatially engaging geometric experiments of the second half of the 20th century. The study hypothesis that the evolutionary design optimisation of this tectonic system has the potential to re-open and expand its practically available design solution space. This paper covers the review of a range of built projects employing catenary glulam roof system, starting from seminal historic precedents like the Festival Hall for the Swiss National Exhibition EXPO 1964 (A. Lozeron, Swiss, 1964) and the Wilkhahn Pavilions (Frei Otto, Germany, 1987), to contemporary examples, including the Grandview Heights Aquatic Centre (HCMA Architecture + Design, Canada, 2016). It analysis their structural concept, geometric and spatial complexity, fabrication and assembly protocols, applied construction detailing solutions, and more, with as aim to identify methods, tools, techniques, and construction details that can be taken forward in future research aimed at minimising construction complexity. Findings from this precedent study form the basis for the evolutionary-algorithmic design and construction method development that is part of the larger study. By expanding the tectonic system’s practically applicable architecture design solution space and facilitating architects’ access to a low-tech producible, spatially versatile, lightweight, eco-friendly, wooden roof structure typology, this study contributes to environmentally sustainable building.
keywords	Precedent Studies, Light-weight architecture, Timber shell, Catenary, Algorithmic Optimisation, Glue-laminated timber
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2016_102
id	ecaade2016_102
authors	Decker, Martina, Hahn, George and Harris, Libertad M.
year	2016
title	Bio-Enabled Façade Systems - Managing Complexity of Life through Emergent Technologies
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 603-612
doi	https://doi.org/10.52842/conf.ecaade.2016.1.603
wos	WOS:000402063700065
summary	The abundance of vertical surfaces in urban environments and their use for green installations have been of great interest in the architectural community. This paper discusses how vertical gardens and urban farming can be spurred on and enabled by two emerging fields of investigation: Material Science and the Internet of Things (IoT). This paper discusses how two emerging strategies, smart materials and novel sensing and actuation systems linked to the IoT, can facilitate the creation of a stable environment or zone along architectural facades for the creation of new ecosystems. Furthermore, this paper will contemplate future trajectories for the integration of living matter into buildings and propose an open source database that will facilitate the exchange of collected data and knowledge to spur on further developments.
keywords	Microalgae; Nanotechnology; Internet of Things; Bio-Enabled Design; Microcontrollers, Sensors
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia16_488
id	acadia16_488
authors	Derme, Tiziano; Mitterberger, Daniela; Di Tanna, Umberto
year	2016
title	Growth Based Fabrication Techniques for Bacterial Cellulose: Three-Dimensional Grown Membranes and Scaffolding Design for Biological Polymers
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 488-495
doi	https://doi.org/10.52842/conf.acadia.2016.488
summary	Self-assembling manufacturing for natural polymers is still in its infancy, despite the urgent need for alternatives to fuel-based products. Non-fuel based products, specifically bio-polymers, possess exceptional mechanical properties and biodegradability. Bacterial cellulose has proven to be a remarkably versatile bio-polymer, gaining attention in a wide variety of applied scientific applications such as electronics, biomedical devices, and tissue-engineering. In order to introduce bacterial cellulose as a building material, it is important to develop bio-fabrication methodologies linked to material-informed computational modeling and material science. This paper emphasizes the development of three-dimensionally grown bacterial cellulose (BC) membranes for large-scale applications, and introduces new manufacturing technologies that combine the fields of bio-materials science, digital fabrication, and material-informed computational modeling. This paper demonstrates a novel method for bacterial cellulose bio-synthesis as well as in-situ self-assembly fabrication and scaffolding techniques that are able to control three-dimensional shapes and material behavior of BC. Furthermore, it clarifies the factors affecting the bio-synthetic pathway of bacterial cellulose—such as bacteria, environmental conditions, nutrients, and growth medium—by altering the mechanical properties, tensile strength, and thickness of bacterial cellulose. The transformation of the bio-synthesis of bacterial cellulose into BC-based bio-composite leads to the creation of new materials with additional functionality and properties. Potential applications range from small architectural components to large structures, thus linking formation and materialization, and achieving a material with specified ranges and gradient conditions, such as hydrophobic or hydrophilic capacity, graded mechanical properties over time, material responsiveness, and biodegradability.
keywords	programmable materials, material agency, biomimetics and biological design
series	ACADIA
type	paper
email
last changed	2022/06/07 07:55

_id	ecaade2016_114
id	ecaade2016_114
authors	Erdine, Elif and Kallegias, Alexandros
year	2016
title	Calculated Matter - Algorithmic Form-Finding and Robotic Mold-Making
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 163-168
doi	https://doi.org/10.52842/conf.ecaade.2016.1.163
wos	WOS:000402063700018
summary	The paper addresses a specific method for the production of custom-made, differentiated moulds for the realization of a complex, doubly-curved wall element during an international three-week architectural programme, Architectural Association (AA) Summer DLAB. The research objectives focus on linking geometry, structure, and robotic fabrication within the material agency of concrete. Computational workflow comprises the integration of structural analysis tools and real-time form-finding methods in order to inform global geometry and structural performance simultaneously. The ability to exchange information between various simulation, modelling, analysis, and fabrication software in a seamless fashion is one of the key areas where the creation of complex form meets with the simplicity of exchanging information throughout various platforms. The paper links the notions of complexity and simplicity throughout the design and fabrication processes. The aim to create a complex geometrical configuration within the simplicity of a single material system, concrete, presents itself as an opportunity for further discussion and development.
keywords	robotic fabrication; custom form-work; generative design; structural analysis; concrete
series	eCAADe
email
last changed	2022/06/07 07:55

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	ascaad2016_050
id	ascaad2016_050
authors	Gharbi, Asma; Ferdaws Belcadhi and Abdelkader Ben Saci
year	2016
title	Morphological Taxonomy As a Methodological Tool of Form Manipulation
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 493-502
summary	The paper presents taxonomy as a methodological tool which serves to better understand the architectural morphose (act of giving shape), and its contribution to form manipulation, produced through a morpho-digital combination. The interest is to exploit digital processes to decipher an underlying architectural grammar. It is thus a matter of releasing the morphological knowledge in conformations (observed forms’ system). This orientation stipulates that the produced shape results from a system of morphose which we can formalize and understand by the identification of the structural attributes and the organizational logic, as well as the inherent morphological laws of generation. We stipulate that the interest of our morpho-digital method is the characterization and the development of a constructive morphological model governed by internal relations. Thus, a collection of dwelling buildings is characterized by both the morphology decomposition and the morphometric study. Based on the questions about the form produced, the method promotes a creative situation in the field of architectural design.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	acadia23_v3_39
id	acadia23_v3_39
authors	Goti, Kyriaki; A. Scelsa, Jonathan; Rossi, Natalia; Wang, Wei; Palaci, Arthur
year	2023
title	Bric(k)olage: Spoliated Masonry C+D Waste
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 3: Proceedings of the 43rd Annual Conference for the Association for Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9891764-1-0]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 24-32.
summary	The 2016 US Environmental Protection Agency reported that 23.1 million tons of broken pieces of concrete waste are annually discarded from new construction sites (EPA -2) and in example states in the north american context only 6.6% of C&D concrete is recycled; the rest is thrown out in landfills as it is labeled “contaminated or too hard to process on a large scale.” (CT DOE 25) Relatively little investigation has occurred in how this material could reappear in the architectural project that might honor its intrinsic broken quality as a part of its materiality within a life-cycle of continual usage. This project speaks towards a problematic Habit of the Anthropocene in how we construct buildings placing intrinsic cultural value on new parts over the broken and old due to economic efficiencies.
series	ACADIA
type	field note
email
last changed	2024/04/17 13:59

_id	ascaad2016_042
id	ascaad2016_042
authors	Goud, Srushti
year	2016
title	Parametrizing Indian Karnata-Dravida Temple Using Geometry
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 409-420
summary	The Karnata-Dravida temple tradition flourished and evolved for 700 years. The evolution of the typology was demonstrated through the structure. However, as the Shastras or ancient texts proclaim, the underlying principles of geometry remain unchanged. Geometry and the unchanging principles of construction made the architects experiment with form, material and ornamentation. Geometry does not only mean shapes or two dimensional diagrams but it is a rule to amalgamate all the elements to form a dynamic form of a temple. The paper validates the use of geometry through an evolving sequence of Karnata-Dravida temples with the help of an analytical model created using the grasshopper software. The components of the model are based on the geometric rule (the basis for parametrizing) and parameters of the algorithm – plan forms, organizational compositions, vimana or superstructure composition – which result in a geometry. Even though building science is an old tradition, the use of computational procedures reveals the predictable nature of temples in the Dravidian clan and enables the analysis of existing temples, development of new possibilities or evolution of interpreted forms. Hence, enriching the existing understandings of previous scholarships in the field of temple architecture with an entirely new system of interpretation. In the age of technology where analytics plays a crucial role in almost all sectors, ancient temple architecture in India unfortunately falls behind when it comes to computational methods of restoration or reconstruction. This research questions the applicability of computational technology as a facilitator in preserving or reconstructing existing temples while maintaining its creative liberty.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ascaad2016_026
id	ascaad2016_026
authors	Hand, Jon
year	2016
title	Implications of Including Fully Participating Furniture and Fittings in Numerical Simulation Models
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 237-246
summary	Many simulation teams create models of empty buildings, e.g. without furnishings and fittings. Such virtual worlds lack many of the thermal and visual artefacts by which we make thermal and visual judgements and some numerical tools only abstractly treat the physics of furnishing and fittings. This paper explores what happens if sunlight actually falls on desks and chairs and filing cabinets rather than the floor as well as what happens if interior artefacts were treated with the same rigour as facades by the simulation engine and are available for use in visual assessments. Typically increasing model resolution is a tedious process and added detail if included, may not be fully utilised. To explore removing such barriers, a data store of pre-defined entities, which include provenance, visual form, explicit thermophysical composition, light distributions and mass flow attributes has been introduced in ESP-r. ESP-r facilities for calculating view-factors and insolation distributions have been updated to include this extended data model. Issues related to creating and managing such entities is discussed and the impacts of their use is quantified.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	ascaad2016_010
id	ascaad2016_010
authors	Harnomo Fajar I.; Aswin Indraprastha
year	2016
title	Computational Weaving Grammar of Traditional Woven Pattern
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 75-84
summary	Weaving technique is one of the indigenous craftsmanship practices that are common in most of ethnic groups in Indonesia. Generally, it uses thin strips of organic material such as bamboo or rattan to make plane of surface that further can be developed into daily utensils or as a traditional architectural building components such as partition wall and floor. The research of weaving grammar as a system and process had been introduced and explored using Shape Grammar theory and principles. Having the potential implementation and to preserve the traditional weaving method, the grammar can be explored as a method of exploration in architectural design by extending the computation method based on the visual embedding of its pattern languages. The aim of the study is to discover the geometrical configuration underlied traditional weaving grammar by reconfiguring and elaborating procedures and further develop generative method using computational approach. We focused on the exploration of single and dual patterns of biaxial types of West Java woven pattern by using shape grammar principles. The result shows computational method is constructed by several rules which are defined as generative procedure. The result advised that traditional woven pattern has similarity according to its ruled-based system of generative algorithm.
series	ASCAAD
email
last changed	2017/05/25 13:13

_id	acadia16_318
id	acadia16_318
authors	Huang, Alvin
year	2016
title	From Bones to Bricks: Design the 3D Printed Durotaxis Chair and La Burbuja Lamp
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 318-325
doi	https://doi.org/10.52842/conf.acadia.2016.318
summary	Drawing inspiration from the variable density structures of bones and the self-supported cantilvers of corbelled brick arches, the Durotaxis Chair and the La Burbuja lamp explore a material-based design process by responding to the challenge of designing a 3D print, rather than 3D printing a design. As such, the fabrication method and materiality of 3D printing define the generative design constraints that inform the geometry of each. Both projects are seen as experiments in the design of 3D printed three-dimensional space packing structures that have been designed specifically for the machines by which they are manufactured. The geometry of each project has been carefully calibrated to capitalize on a selection of specific design opportunities enabled by the capabilities and constraints of additive manufacturing. The Durotaxis Chair is a half-scale prototype of a fully 3D printed multi-material rocking chair that is defined by a densely packed, variable density three-dimensional wire mesh that gradates in size, scale, density, color, and rigidity. Inspired by the variable density structure of bones, the design utilizes principal stress analysis, asymptotic stability, and ergonomics to drive the logics of the various gradient conditions. The La Burbuja Lamp is a full scale prototype for a zero-waste fully 3D printed pendant lamp. The geometric articulation of the project is defined by a cellular 3D space packing structure that is constrained to the angles of repose and back-spans required to produce un-supported 3D printing.
keywords	parametic design, digital fabrication, structural analysis, additive manufacturing, 3d printing
series	ACADIA
type	paper
email
last changed	2022/06/07 07:50

_id	ecaade2016_037
id	ecaade2016_037
authors	Khabazi, Zubin and Budig, Michael
year	2016
title	Adaptive Fabrication - Cellular Concrete Casting Using Digital Moulds
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 83-92
doi	https://doi.org/10.52842/conf.ecaade.2016.1.083
wos	WOS:000402063700010
summary	Computational design and digital fabrication have expanded the use of digital manufacturing machineries for the realization of architecture, yet they have their own limitations of material use. These limitations caused some materials like cement, plaster and clay become marginal in this new digital context, despite their vast use in the building industry. In this context, this paper will present a research, focusing on the use of concrete through the development of a custom-designed device, which is an adjustable digital mould. This digital mould has been designed specifically for a project called Procrystalline Wall and has been 'adapted' to the conditions of its agenda in terms of size, shape, typology, and even technical matters. However, this adaptability means that the device is not aimed to work for any other project and remain exclusive to this particular design only. This paper will further discuss the validity and obstacles of the presented method in a more global context.
keywords	Concrete Fabrication; Digital Casting; Digital Adjustable Mould; Cellular Concrete Casting; Cellular Solid Morphologies
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2016_223
id	ecaade2016_223
authors	Khallaf, Mohamed and Jupp, Julie
year	2016
title	Designing for Urban Microclimates: Towards A Generative Performance-based Approach to Wind Flow Optimization
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 95-106
doi	https://doi.org/10.52842/conf.ecaade.2016.2.095
wos	WOS:000402064400009
summary	This paper presents the foundations of a multidisciplinary design optimisation method that addresses the problem of competing wind flow profiles within urban microclimates. The simultaneous integration of architectural and urban design parameters and their aerodynamic constraints are investigated. Differences in the height of tall buildings, which define the urban canopy layer are accounted for. The formulation that supports the simulation of aerodynamic forces at the architectural and urban scales includes multidisciplinary parameter specification of 2D and 3D building geometry, spatial morphology, spatial topology, wind flow settings, and wind flow compliance. The MDO framework and its development are discussed relative to their generative performance-based capacity and innovative approach to multidisciplinary wind flow optimization
keywords	Urban microclimate; Multidisciplinary design optimisation; Generative performance-based design; Systems level perspective
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2016_157
id	ecaade2016_157
authors	Kulcke, Matthias and Lorenz, Wolfgang E.
year	2016
title	Utilizing Gradient Analysis within Interactive Genetic Algorithms
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 359-364
doi	https://doi.org/10.52842/conf.ecaade.2016.2.359
wos	WOS:000402064400035
summary	The paper describes and discusses the possible integration of gradient analysis, as a method and tool for architects and designers to analyze the degree of proportion-complexity of a design, into the process of designing an object utilizing interactive genetic algorithms (IGA). A VBA implementation for AutoCAD has been developed by the authors, enabling to test the usability of genetic algorithms (GA) for minimizing the angle-redundancy and length-redundancy quotient. The gradient analysis itself has been developed on the basic assumption that the complexity of an objects appearance is reduced by redundancy, which can be measured focussing on different levels of comparison; among others e. g. variety of material, colour-combinations and proportion. The latter comes under scrutiny if the method of gradient analysis is applied.
keywords	Gradient Analysis; Interactive Genetic Algorithm; Design Complexity; Redundancy; Spatial Analysis; Form and Geometry; Proportion
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2017_144
id	ecaade2017_144
authors	Lange, Christian J.
year	2017
title	Elements \| robotic interventions II
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 671-678
doi	https://doi.org/10.52842/conf.ecaade.2017.1.671
summary	Reviewing the current research trends in robotic fabrication around the world, the trajectory promises new opportunities for innovation in Architecture and the possible redefinition of the role of the Architect in the industry itself. New entrepreneurial, innovative start-ups are popping up everywhere challenging the traditional model of the architect. However, it also poses new questions and challenges in the education of the architect today. What are the appropriate pedagogical methods to instill enthusiasm for new technologies, materials, and craft? How do we avoid the pure application of pre-set tools, such as the use of the laser cutter has become, which in many schools around the world has caused problems rather than solving problems? How do we teach students to invent their tools especially in a society that doesn't have a strong background in the making? The primary focus of this paper is on how architectural CAAD/ CAM education through the use of robotic fabrication can enhance student's understanding, passion and knowledge of materiality, technology, and craftsmanship. The paper is based on the pedagogical set-up and method of an M. Arch I studio that was taught by the author in fall 2016 with the focus on robotic fabrication, materiality, traditional timber construction systems, tool design and digital and physical craftsmanship.
keywords	CAAD Education, Digital Technology, Craftsmanship, Material Studies, Tool Design, Parametric Modeling, Robotic Fabrication
series	eCAADe
email
last changed	2022/06/07 07:52

For more results click below: