Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 623

Reformat results as: short short into frame detailed detailed into frame

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
doi	https://doi.org/10.52842/conf.acadia.2016.140
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	ascaad2016_038
id	ascaad2016_038
authors	Rabboh, Emad H.; Ali A. Elmansory
year	2016
title	Utilizing CAAD in the Design Studio to Consolidate with Professional Practices - Pedagogical approach
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 367-374
summary	Utilization of computer-aided architectural design CAAD in architectural design studio has its problems. Recently, CAAD has been over used within education, , and applied, presumably, more efficiently in professional contexts.. Noticeably, time available for the application of CAAD in architectural firms outweights that of academy. Consequently, it has to be utilized effectively and efficiently in the design studio. The current study proposes and discusses techniques to expand and consolidate CAAD utilization in the design studio by analysing stages of work of design professionals, as well as the utilization of CAAD in architectural firms, in the first phase. The second phase looks at the stages of work in the design studio academically. Later, we conduct a survey and categorization of the Egyptian schools of architecture, to identify the mechanisms of their CAAD applications. We aim to improve the synergies between academia and professional practice and, in this respect, we hold a comparison between the professional context and the academic context with emphasis on the pedagogical aspects of architecture in design studio. The third part makes proposals to bridge the gap between the professional practices in the applications of CAAD and academic practices via enhancement of architectural technology-based learning milieu. The proposed techniques are applied and examined in the design studio. They aim to establish the parallelism between academic objectives and professional and technological objectives.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ascaad2016_015
id	ascaad2016_015
authors	Sosa, Marco; Lina Ahmad
year	2016
title	Integration of Digital Tools and Fabrication Methods for Learning CAAD - Innovative pedagogy methods applied in a design college in Abu Dhabi
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 125-134
summary	The interior design curriculum at the College of Arts & Creative Enterprises (CACE), Zayed University in Abu Dhabi, offers two CAAD courses; the first is concurrent with first-year Interior Design studio; the second is a year later. The objectives of the first is equip students with the tools needed to represent and communicate their designs, while the second looks in-depth into the process of documentations. This paper will focus on presenting our pedagogical approach in the first CAAD course, as well as tracing students implementation, knowledge utilization and how it is carried over into their main interior design studio. It will also shed light into CAAD influence on expanding student technical and material knowledge through direct space survey and documentation. The paper aims at presenting and reflecting upon a dynamic devised adaptable pedagogical method that identifies two student categories; those who learn how to ‘practice design’ (majority), and those who unfold the realm of ‘being a designer’ (minority). It is the latter few that continue their path, emerge into various international settings, and have a major influence on their local communities.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	ecaade2017_256
id	ecaade2017_256
authors	Symeonidou, Ioanna
year	2017
title	Reinventing Design-Build projects with the use of digital media for design and construction - A survey of 120 educational pavilions
doi	https://doi.org/10.52842/conf.ecaade.2017.1.231
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 231-240
summary	During the last decade the hype for digitally fabricated educational pavilions has become very popular among architecture schools. A survey with the aim to catalogue and classify educational pavilions revealed more than 120 cases of digitally fabricated pavilions within the last decade. The analysis of the sample of 120 Design-Build projects built during the period 2006-2016 revealed, apart from obvious similarities and differences, the prevailing trends relating to the materials and the technology used for the design, manufacturing and assembly. From the processing of the gathered data a set of typologies emerge, which relate both to morphological characteristics as well as to the design process. The paper concludes by discussing the advantages and critical points of this educational practice and the learning outcomes for both students and educators.
keywords	Design-Build; Digital fabrication; architectural education; CAD / CAM; pavilions
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ascaad2016_049
id	ascaad2016_049
authors	Abdelsabour, Inas; Heba Farouk
year	2016
title	Impact of Using Structural Models on Form Finding - Incorporating Practical Structural Knowledge into Design Studio
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 483-492
summary	Physical Models as an architectural design tool, had major effect on architecture learning process. In structural form finding, it helped in improving visual design thinking to track form creation processes during form finding design stage. The aim is to study the impact of using physical models for second year architecture students in design studios learning. By analyzing and comparing students’ performance and progress; to clarify the effect of using physical models as a tool for designing progression, followed by analytical study on the students' structural models, in order to investigate the influence of models on their design educational progress. Research achieved that there were three basic phases the students pass through during form finding process when used manual physical models that improve the students' design capability.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ascaad2016_059
id	ascaad2016_059
authors	Admed, Mohammad H.K.
year	2016
title	Towards Developing BIM Curriculum in Higher Education in Egypt
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 589-598
summary	The paper surveys and discusses the current state of teaching BIM in departments of architecture in Egypt. It also connects it to the increasing professional market demand for technologically qualified architects. In specific, the paper explores the reasons behind the fact that the local BIM curriculum is lagging behind its international counterpart. It also explores the need to utilise BIM software capabilities. A further comparative survey is carried out between local case studies and international cases through identifying several stages of BIM implementation in both teaching and design. The advantages and disadvantages of the current method of teaching are explored in an effort to improve performance of BIM curriculum.
series	ASCAAD
email
last changed	2017/05/25 13:34

_id	sigradi2016_448
id	sigradi2016_448
authors	Afsari, Kereshmeh; Eastman, Charles M.; Shelden, Dennis R.
year	2016
title	Data Transmission Opportunities for Collaborative Cloud-Based Building Information Modeling
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.907-913
summary	Collaboration within Building Information Modeling process is mainly based on file transfer while BIM data being exchanged in either vendor specific file formats or neutral format using Industry Foundation Classes (IFC). However, since the Web enables Cloud-based BIM services, it provides an opportunity to exchange data via Web transfer services. Therefore, the main objective of this paper is to investigate what features of Cloud interoperability can assist a network-based BIM data transmission for a collaborative work flow in the Architecture, Construction, and Engineering (AEC) industry. This study indicates that Cloud-BIM interoperability needs to deploy major components such as APIs, data transfer protocols, data formats, and standardization to redefine BIM data flow in the Cloud and to reshape the collaboration process.
keywords	BIM; Cloud Computing; Data Transmission; Interoperability; IFC
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ascaad2016_035
id	ascaad2016_035
authors	Al-Matarneh, Rana; Ihsan Fethi
year	2016
title	Assessing the Impact of CAD Tools on Architectural Design Quality - A case study of graduation projects in Jordan
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 331-350
summary	The current concept of architectural design education in most schools of architecture in Jordan is a blend between manual pen drafting and digital approaches. However, the disconnection between these two methods has resulted in the students' failure to transfer skills learnt through traditional methods to the digital method of CAD. The objective of this study is twofold: to first compare students’ attitudes toward using both methods and to then assess the impact of CAD use on the quality of architectural design. An open-ended questionnaire was designed to measure variables related to students’ preferences toward CAD and traditional methods. The quality of sixty graduation projects at three Jordanian universities was investigated. The results appear to support the assumption that CAD tools are used largely as visual means and thereby cause a marked decline in design quality. These findings call for a reconsideration of the status quo and a rethinking of perhaps the entire architectural educational model.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ascaad2016_047
id	ascaad2016_047
authors	Algeciras-Rodríguez, José
year	2016
title	Trained Architectonics
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 461-468
summary	The research presented here tests the capacity of artificial-neural-network (ANN) based multi-agent systems to be implemented in architectural design processes. Artificial Intelligence algorithms allow for a new approach to design, taking advantage of its generic functioning to produce meaningful outcomes. Experimentation within this project is based on Self-Organizing Maps (SOMs) and takes advantage of its behavior in topology to produce architectural geometry. SOMs as full stochastic processes involve randomness, uncertainty and unpredictability as key features to deal with during the design process. Following this behavior, SOMs are used to transmit information, which, instead of being copied, is reproduced after a learning (training) process. Pre-existent architectural objects are taken as learning models as they have been considered masterpieces. In this context, by defining the SOM input set, masterpieces become measurement elements and can be used to set a distance to the new element position in a comparatistic space. The characteristics of masterpieces get embedded within the code and are transmitted to 3D objects. SOM produced objects from a population with shared characteristics where the masterpiece position is its probabilistic center point.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ecaade2021_203
id	ecaade2021_203
authors	Arora, Hardik, Bielski, Jessica, Eisenstadt, Viktor, Langenhan, Christoph, Ziegler, Christoph, Althoff, Klaus-Dieter and Dengel, Andreas
year	2021
title	Consistency Checker - An automatic constraint-based evaluator for housing spatial configurations
doi	https://doi.org/10.52842/conf.ecaade.2021.2.351
source	Stojakovic, V and Tepavcevic, B (eds.), Towards a new, configurable architecture - Proceedings of the 39th eCAADe Conference - Volume 2, University of Novi Sad, Novi Sad, Serbia, 8-10 September 2021, pp. 351-358
summary	The gradual rise of artificial intelligence (AI) and its increasing visibility among many research disciplines affected Computer-Aided Architectural Design (CAAD). Architectural deep learning (DL) approaches are being developed and published on a regular basis, such as retrieval (Sharma et al. 2017) or design style manipulation (Newton 2019; Silvestre et al. 2016). However, there seems to be no method to evaluate highly constrained spatial configurations for specific architectural domains (such as housing or office buildings) based on basic architectural principles and everyday practices. This paper introduces an automatic constraint-based consistency checker to evaluate the coherency of semantic spatial configurations of housing construction using a small set of design principles to evaluate our DL approaches. The consistency checker informs about the overall performance of a spatial configuration followed by whether it is open/closed and the constraints it didn't satisfy. This paper deals with the relation of spaces processed as mathematically formalized graphs contrary to existing model checking software like Solibri.
keywords	model checking, building information modeling, deep learning, data quality
series	eCAADe
email
last changed	2022/06/07 07:54

_id	caadria2016_013
id	caadria2016_013
authors	Aschwanden, Gideon D.P.A.
year	2016
title	Neighbourhood detection with analytical tools
doi	https://doi.org/10.52842/conf.caadria.2016.013
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 13-22
summary	The increasing population size of cities makes the urban fabric ever more complex and more disintegrated into smaller areas, called neighbourhoods. This project applies methods from geoscience and software engineering to the process of identification of those neighbourhoods. Neighbourhoods, by nature, are defined by connec- tivity, centrality and similarity. Transport and geospatial datasets are used to detect the characteristics of places. An unsupervised learning algorithm is then applied to sort places according to their characteris- tics and detect areas with similar make up: the neighbourhood. The at- tributes can be static like land use or space syntax attributes as well as dynamic like transportation patterns over the course of a day. An un- supervised learning algorithm called Self Organizing Map is applied to project this high dimensional space constituting of places and their attributes to a two dimensional space where proximity is similarity and patterns can be detected – the neighbourhoods. To summarize, the proposed approach yields interesting insights into the structure of the urban fabric generated by human movement, interactions and the built environment. The approach represents a quantitative approach to ur- ban analysis. It reveals that the city is not a polychotomy of neigh- bourhoods but that neighbourhoods overlap and don’t have a sharp edge.
keywords	Data analytics; urban; learning algorithms; neighbourhood delineation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2016_420
id	sigradi2016_420
authors	Bastian, Andrea Verri
year	2016
title	Fotogrametría Esférica: Uma Técnica de baixo custo para documentaç?o Arquitetônica [Spherical Photogrammetry: a low-cost technique for architectural documentation]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.180-187
summary	This paper reports the use of spherical photogrammetry used for the survey and documentation of buildings and developed at the Universit? Politecnica delle Marche, Ancona, Italy, the engineer and professor Gabriele Fangi. The paper presents and discusses the concepts and processes involved in this technique, as well as its use to obtain the main facade of the refund drawing the Church of St. Dominic, pointing its main advantages (such as low-cost technique) and disadvantages, as well as the results obtained when compared to traditional techniques photogrammetric.
keywords	Heritage documentation; Digital Photogrammetry; Spherical Photogrammetry; Image based techniques for digital documentation
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia16_362
id	acadia16_362
authors	Beesley, Philip; Ilgun, Zeliha, Asya; Bouron, Giselle; Kadish, David; Prosser, Jordan; Gorbet, Rob; Kulic, Dana; Nicholas, Paul; Zwierzycki, Mateusz
year	2016
title	Hybrid Sentient Canopy: An implementation and visualization of proprioreceptive curiosity-based machine learning
doi	https://doi.org/10.52842/conf.acadia.2016.362
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 362-371
summary	This paper describes the development of a sentient canopy that interacts with human visitors by using its own internal motivation. Modular curiosity-based machine learning behaviour is supported by a highly distributed system of microprocessor hardware integrated within interlinked cellular arrays of sound, light, kinetic actuators and proprioreceptive sensors in a resilient physical scaffolding system. The curiosity-based system involves exploration by employing an expert system composed of archives of information from preceding behaviours, calculating potential behaviours together with locations and applications, executing behaviour and comparing result to prediction. Prototype architectural structures entitled Sentient Canopy and Sentient Chamber developed during 2015 and 2016 were developed to support this interactive behaviour, integrating new communications protocols and firmware, and a hybrid proprioreceptive system that configured new electronics with sound, light, and motion sensing capable of internal machine sensing and externally- oriented sensing for human interaction. Proprioreception was implemented by producing custom electronics serving photoresistors, pitch-sensing microphones, and accelerometers for motion and position, coupled to sound, light and motion-based actuators and additional infrared sensors designed for sensing of human gestures. This configuration provided the machine system with the ability to calculate and detect real-time behaviour and to compare this to models of behaviour predicted within scripted routines. Testbeds located at the Living Architecture Systems Group/Philip Beesley Architect Inc. (LASG/PBAI, Waterloo/Toronto), Centre for Information Technology (CITA, Copenhagen) National Academy of Sciences (NAS) in Washington DC are illustrated.
keywords	intedisciplinary/collaborative design, intelligent environments, artificial intelligence, sensate systems
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

_id	ecaade2016_079
id	ecaade2016_079
authors	Cheng, Chi-Li and Hou, June-Hao
year	2016
title	Biomimetic Robotic Construction Process - An approach for adapting mass irregular-shaped natural materials
doi	https://doi.org/10.52842/conf.ecaade.2016.1.133
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 133-142
summary	Beaver dams are formed by two main processes. One is that beavers select proper woods for constructing. The other one is that streams aggregate those woods to be assembled. Using this approach to construction structure is suitable for natural environment. In this paper, we attempt to develop a construction process which is suitable for all-terrain construction robot in the future. This construction process is inspired by beavers' construction behavior in nature. Beavers select proper sticks to make the structure stable. We predict that particular properties of sticks contribute gravity-driven assembly of wood structure. Thus, we implement the system with machine learning to find proper properties of sticks to improve selection mechanism of construction process. During this construction process, 3D scanner on robotic arm scans and recognizes sticks on terrain, and then robot will select proper sticks and place them. After placement, the system will scan and record the results for learning mechanism.
wos	WOS:000402063700015
keywords	Biomimetic Design; Machine Learning; Natural Material; Point Cloud Analysis; Robotic Fabrication
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2017_155
id	caadria2017_155
authors	Cichocka, Judyta Maria, Browne, Will Neil and Rodriguez, Edgar
year	2017
title	Optimization in the Architectural Practice - An International Survey
doi	https://doi.org/10.52842/conf.caadria.2017.387
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 387-396
summary	For several years great effort has been devoted to the study of Architectural Design Optimization (ADO). However, although in the recent years ADO has attracted much attention from academia, optimization methods and tools have had a limited influence on the architectural profession. The aim of the study is to reveal users' expectations from the optimization tools and define limitations preventing wide-spread adaptation of the optimization solvers in the architectural practice. The paper presents the results of the survey "Optimization in the architectural practice" conducted between December 2015 and February 2016 on 165 architectural trainees and practising architects from 34 countries. The results show that there is a need for an interactive multi-objective optimization tool, as 78% respondents declared that a multi-objective optimization is more necessary in their practice than a single objective one and 91% of them acknowledged the need for choice of promising solutions during optimization process. Finally, it has been found that daylight, structure and geometry are three top factors which architects are interested in optimizing.
keywords	Architectural Design Optimization; Optimizaiton Techniques; Generic Solvers; Multi-criteria Decision Making
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ascaad2016_027
id	ascaad2016_027
authors	Cocho-Bermejo, Ana
year	2016
title	Time in Adaptable Architecture - Deployable emergency intelligent membrane
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 249-258
summary	The term "Parametricism" widespread mainly by Patrick Schumacher (Schumacher, 2008) is worthy of study. Developing the concept of Human Oriented Parametric Architecture, the need of implementing time as the lost parameter in current adaptive design techniques will be discussed. Morphogenetic processes ideas will be discussed through the principle of an adaptable membrane as a case study. A model implementing a unique Arduino[i] on the façade will control its patterns performance through an Artificial Neural Network that will understand the kind of scenario the building is in, activating a Genetic Algorithm that will optimize the insulation performance of the ETFE pillows. The system will work with a global behavior for façade pattern performance and with a local one for each pillow, giving the option of individual sun-shading control. Machine learning implementation will give the façade the possibility to learn from the efficacy of its decisions through time, eliminating the need of a general on-off behavior.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	sigradi2016_805
id	sigradi2016_805
authors	Cormack, Jordan; Sweet, Kevin S.
year	2016
title	Parametrically Fabricated Joints: Creating a Digital Workflow
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.412-417
summary	Timber joinery for furniture and architectural purpose has always been identified as a skill or craft. The craft is the demonstration of hand machined skill and precision which is passed down or developed through the iteration of creation and refined reflection. Using digital fabrication techniques provides new, typically unexplored ways of creating and designing joints. It is as if these limitations which bind the ratio of complexity and use are stretched. This means that these joints, from a technical standpoint, can be more advanced than historically hand-made joints as digital machines are not bound by the limitations of the human. The research investigated in this paper explores the ability to create sets of joints in a parametric environment that will be produced with CNC machines, thus redefining the idea of the joint through contemporary tools of creation and fabrication. The research also aims to provide a seamless, digital workflow from the flexible, parametric creation of the joint to the final physical fabrication of it. Traditional joints, more simple in shape and assembly, were first digitally created to ease the educational challenges of learning a computational workflow that entailed the creation and fabrication of geometrically programmed joints. Following the programming and manufacturing of these traditional joints, more advanced and complex joints were created as the understanding of the capabilities of the software and CNC machines developed. The more complex and varied joints were taken from a CAD virtual environment and tested on a 3-axis CNC machine and 3D printer. The transformation from the virtual environment to the physical highlighted areas that required further research and testing. The programmed joint was then refined using the feedback from the digital to physical process creating a more robust joint that was informed by reality.
keywords	Joinery; digital fabrication; parametric; scripting; machining
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia16_116
id	acadia16_116
authors	Davis, Daniel
year	2016
title	Evaluating Buildings with Computation and Machine Learning
doi	https://doi.org/10.52842/conf.acadia.2016.116
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 116-123
summary	Although computers have significantly impacted the way we design buildings, they have yet to meaningfully impact the way we evaluate buildings. In this paper we detail two case studies where computation and machine learning were used to analyze data produced by building inhabitants. We find that a building’s ‘data exhaust’ provides a rich source of information for longitudinally analyzing people’s architectural preferences. We argue that computation-driven evaluation could supplement traditional post occupancy evaluations.
keywords	spatial analytics, machine learning, post occupancy evaluation
series	ACADIA
type	paper
email
last changed	2022/06/07 07:55

_id	ecaade2016_095
id	ecaade2016_095
authors	Doumpioti, Christina
year	2016
title	Material Agency and Physical Boundaries
doi	https://doi.org/10.52842/conf.ecaade.2016.1.521
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 521-528
summary	The research builds on the relationship between matter and energy and the idea of boundaries as sentient interfaces capable of affecting our bodily experience and perception of space due to their inherent physical attributes. Two key issues addressed are firstly, the revisiting of the architectural boundary as a thermodynamic zone and secondly, the identification of material behaviour in relation to energy stimuli. It is argued that the transient behaviour of materials can offer an instrumental reconsideration on how architecture establishes spatial articulation through boundaries and this is demonstrated through a design-led project.
wos	WOS:000402063700057
keywords	thermal field; responsive materials; passively active materials; heat transfer; thermodynamic; matter and energy
series	eCAADe
email
last changed	2022/06/07 07:55

_id	caadria2016_693
id	caadria2016_693
authors	Fernando, Ruwan; Karine Dupre and Henry Skates
year	2016
title	Tangible User Interfaces for Teaching Building Physics: Towards continuous designing in education
doi	https://doi.org/10.52842/conf.caadria.2016.693
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 693-702
summary	This paper follows our evaluation and research into designing tangible physical media for the purposes of teaching building physics to undergraduate architecture students. These media interfaces make use of a virtual environment to promote an understanding of the cycles, which govern architectural and urban projects (for example solar studies, the flow of heat, air and water). This project aims to create an ecology of devices which can be used by students to self-direct themselves and harbour critical making in their research methods (with the explicit intent of dissolving the barrier between design and research). The basic premise of this research, is that in light of growing student numbers, more students lacking confidence in numeracy skills as well as the desire to have self-directed or group-directed learning, tangible media has a promising role to play. There are several reasons for this optimism. The first is that a better sense of intuition is gained from an interactive model over reading notes from a lecture or textbook. The second is that tangible media engages in other modes of learning, being valuable to students who have an aptitude for kinesthetic and spatial learning over text-dominant learning.
keywords	Pedagogy; tangible user interfaces; augmented reality; internet of things; designing for teaching
series	CAADRIA
email
last changed	2022/06/07 07:50

For more results click below: