Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 623

Reformat results as: short short into frame detailed detailed into frame

_id	acadia18_404
id	acadia18_404
authors	Clifford, Brandon; McGee, Wes
year	2018
title	Cyclopean Cannibalism. A method for recycling rubble
doi	https://doi.org/10.52842/conf.acadia.2018.404
source	ACADIA // 2018: Recalibration. On imprecisionand infidelity. [Proceedings of the 38th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-17729-7] Mexico City, Mexico 18-20 October, 2018, pp. 404-413
summary	Each year, the United States discards 375 million tons of concrete construction debris to landfills (U.S. EPA 2016), but this is a new paradigm. Past civilizations cannibalized their constructions to produce new architectures (Hopkins 2005). This paper interrogates one cannibalistic methodology from the past known as cyclopean masonry in order to translate this valuable method into a contemporary digital procedure. The work contextualizes the techniques of this method and situates them into procedural recipes which can be applied in contemporary construction. A full-scale prototype is produced utilizing the described method; demolition debris is gathered, scanned, and processed through an algorithmic workflow. Each rubble unit is then minimally carved by a robotic arm and set to compose a new architecture from discarded rubble debris. The prototype merges ancient construction thinking with digital design and fabrication methodologies. It poses material cannibalism as a means of combating excessive construction waste generation.
keywords	full paper, cyclopean, algorithmic, robotic fabrication, stone, shape grammars, computation
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	ecaade2016_013
id	ecaade2016_013
authors	Lorenz, Wolfgang E. and Wurzer, Gabriel
year	2016
title	Flying Bricks - Algorithmic Design Studio
doi	https://doi.org/10.52842/conf.ecaade.2016.1.205
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 205-212
summary	The design studio 'Flying Bricks' was held during the summer semester 2015. Its main objective was to redesign an existing building with the use of facing bricks algorithmically, utilizing algorithmic thinking and programming as a means for form generation. The purpose of having students express their designs in terms of code was to emphasize problem thinking over solution generation, which has several advantages but also disadvantages which we would like to share in this paper. Furthermore, we would like to show how our implementation process worked, so that others can leverage that for their own algorithmic design courses.
wos	WOS:000402063700023
keywords	NetLogo; Digital Design; Bricks; Education
series	eCAADe
email
last changed	2022/06/07 07:59

_id	sigradi2016_450
id	sigradi2016_450
authors	Araujo, André L.; Celani, Gabriela
year	2016
title	Exploring Weaire-Phelan through Cellular Automata: A proposal for a structural variance-producing engine
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.710-714
summary	Complex forms and structures have always been highly valued in architecture, even much before the development of computers. Many architects and engineers have strived to develop structures that look very complex but at the same time are relatively simple to understand, calculate and build. A good example of this approach is the Beijing National Aquatics Centre design for the 2008 Olympic Games, also known as the Water Cube. This paper presents a proposal for a structural variance-producing engine using cellular automata (CA) techniques to produce complex structures based on Weaire-Phelan geometry. In other words, this research evaluates how generative and parametric design can be integrated with structural performance in order to enhance design flexibility and control in different stages of the design process. The method we propose was built in three groups of procedures: 1) we developed a method to generate several fits for the two Weaire-Phelan polyhedrons using CA computation techniques; 2) through the finite elements method, we codify the structural analysis outcomes to use them as inputs for the CA algorithm; 3) evaluation: we propose a framework to compare how the final outcomes deviate for the good solutions in terms of structural performance and rationalization of components. We are interested in knowing how the combination of the procedures could contribute to produce complex structures that are at the same time certain rational. The system developed allows the structural analysis of structured automatically generated by a generative system. However, some efficient solutions from the structural performance point of view do not necessarily represent a rational solution from the feasibility aspects.
keywords	Structural design; Complex structures; Bottom-up design approach
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2016_187
id	caadria2016_187
authors	Cruz, Camilo; Justyna Karakiewicz and Michael Kirley
year	2016
title	Towards the implementation of a composite Cellular Automata model for the exploration of design space
doi	https://doi.org/10.52842/conf.caadria.2016.187
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 187-196
summary	In this paper, we introduce a novel composite Cellular Au- tomata (CA) model to explore the space of design for human envi- ronments. Consisting of multiple, regularly spaced, interleaved 1D CA, our model provides a mechanism to evolve flexible spatial units, where the ‘cells’ are not defined as programmatic elements but as ‘form-making’ elements. The efficacy of this approach is evaluated via a standard methodology, typically used in the study of complex adaptive systems. We systematically examine the dynamics of a series of instances of the composite CA by varying initial conditions and transition rules. A measure of entropy is used to validate emergent patterns. Subsequently, we investigate whether the composite CA is capable of generating aggregate spatial units to match specific spatial configurations, using a well-known example as a benchmark. This phase allows us to bring an understanding of the results into the con- text of architectural design.
keywords	Cellular automata; generative design; design space
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2016_777
id	caadria2016_777
authors	Aditra, Rakhmat F. and Andry Widyowijatnoko
year	2016
title	Combination of mass customisation and conventional construction: A case study of geodesic bamboo dome
doi	https://doi.org/10.52842/conf.caadria.2016.777
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 777-786
summary	With the development of advance fabrication, several digi- tal fabrication approaches have been developed. These approaches en- able better form exploration than the conventional manufacturing pro- cess. But, the built examples mostly rely on advance machinery which was not familiar or available in developed country where construction workers are still abundant. Meanwhile, much knowledge gathers in the field practice. This research is aimed to explore an alternative con- struction workflow and method with the combination of mass custom- ization and conventional construction method and to propose the structure system that emphasized this alternative workflow and meth- od. Lattice structure was proposed. The conventional construction method was used in the struts production and mass customization method, laser cutting, and was used for connection production. The algorithmic process was used mainly for data mining, details design, and component production. The backtracking was needed to be pre- dicted and addressed previously. Considerations that will be needed to be tested by further example are on the transition from the digital pro- cess to the manual process. Next research could be for analysing the other engineering aspect for this prototype and suggesting other struc- tural system with more optimal combination of conventional construc- tion and mass customization.
keywords	Mass customisation; algorithmic design; digital fabrication; geodesic dome; lattice structure
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2016_829
id	caadria2016_829
authors	Austin, Matthew and Wajdy Qattan
year	2016
title	I’m a visual thinker: rethinking algorithmic education for architectural design
doi	https://doi.org/10.52842/conf.caadria.2016.829
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 829-838
summary	The representational and visual aspects of architectural de- sign education cause certain pedagogical stresses in student’s capaci- ties to learn how to code, and this paper will serve as a critique of the current state of algorithmic pedagogy in architectural education. The paper will suggest that algorithmic curriculum should not frame code as ‘a design tool’, but as something to be designed in its own right; the writing of the code is the ‘design brief’ itself and not something addi- tional to an architectural design brief. The paper will argue for an ar- chitecture-less educational environment that focuses on computational competencies such as logic, loops and lists along with building a strong analytical basis for students’ understanding of programming and digital geometries.
keywords	Pedagogy; algorithmic; programming; education
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2016_198
id	ecaade2016_198
authors	Caetano, In?s and Leit?o, António
year	2016
title	DrAFT: an Algorithmic Framework for Facade Design
doi	https://doi.org/10.52842/conf.ecaade.2016.1.465
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 465-474
summary	Architecture has always followed the times and their innovations and, currently, an architecture based on digital technologies has been emerging and has increasingly explored architectural facades. In this paper we use DrAFT, a computational framework for the generation and exploration of facade designs, to explore a set of different examples of building skins. DrAFT includes a classification of facades that helps in the identification of algorithms that best suits each design intent. After combining the algorithms provided by this framework, the designer can more easily explore the solution space of the intended design.
wos	WOS:000402063700051
keywords	Generative design; facade design; DrAFT framework; Rosetta
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2023_138
id	ecaade2023_138
authors	Crolla, Kristof and Wong, Nichol
year	2023
title	Catenary Wooden Roof Structures: Precedent knowledge for future algorithmic design and construction optimisation
doi	https://doi.org/10.52842/conf.ecaade.2023.1.611
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 611–620
summary	The timber industry is expanding, including construction wood product applications such as glue-laminated wood products (R. Sikkema et al., 2023). To boost further utilisation of engineered wood products in architecture, further development and optimisation of related tectonic systems is required. Integration of digital design technologies in this endeavour presents opportunities for a more performative and spatially diverse architecture production, even in construction contexts typified by limited means and/or resources. This paper reports on historic precedent case study research that informs an ongoing larger study focussing on novel algorithmic methods for the design and production of lightweight, large-span, catenary glulam roof structures. Given their structural operation in full tension, catenary-based roof structures substantially reduce material needs when compared with those relying on straight beams (Wong and Crolla, 2019). Yet, the manufacture of their non-standard geometries typically requires costly bespoke hardware setups, having resulted in recent projects trending away from the more spatially engaging geometric experiments of the second half of the 20th century. The study hypothesis that the evolutionary design optimisation of this tectonic system has the potential to re-open and expand its practically available design solution space. This paper covers the review of a range of built projects employing catenary glulam roof system, starting from seminal historic precedents like the Festival Hall for the Swiss National Exhibition EXPO 1964 (A. Lozeron, Swiss, 1964) and the Wilkhahn Pavilions (Frei Otto, Germany, 1987), to contemporary examples, including the Grandview Heights Aquatic Centre (HCMA Architecture + Design, Canada, 2016). It analysis their structural concept, geometric and spatial complexity, fabrication and assembly protocols, applied construction detailing solutions, and more, with as aim to identify methods, tools, techniques, and construction details that can be taken forward in future research aimed at minimising construction complexity. Findings from this precedent study form the basis for the evolutionary-algorithmic design and construction method development that is part of the larger study. By expanding the tectonic system’s practically applicable architecture design solution space and facilitating architects’ access to a low-tech producible, spatially versatile, lightweight, eco-friendly, wooden roof structure typology, this study contributes to environmentally sustainable building.
keywords	Precedent Studies, Light-weight architecture, Timber shell, Catenary, Algorithmic Optimisation, Glue-laminated timber
series	eCAADe
email
last changed	2023/12/10 10:49

_id	sigradi2016_417
id	sigradi2016_417
authors	Digiandomenico, Dyego; Landim, Gabriele; Fischer, Henrique
year	2016
title	Trançado: recursos computacionais aplicados no processo de projeto de mobiliário urbano permanente [Trançado: computational design thinking applied to a permanent urban furniture project]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.20-25
summary	This paper presents and discusses the research, design and construction of the urban furniture "Trançado", permanently located at Largo da Batata, a public space in S?o Paulo, Brazil. The project was accomplished using computational design processes as parametric modeling and digital fabrication of prototypes. Stakeholders from different areas were involved: professionals, organizations and citizens. The article contributes discussing and describing the technical features. Above all, it produces inputs for reflection and progress of the application of computational design in architecture.
keywords	Urban furniture; computational design; parametric modeling; algorithmic architecture; collaborative processes
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2016_114
id	ecaade2016_114
authors	Erdine, Elif and Kallegias, Alexandros
year	2016
title	Calculated Matter - Algorithmic Form-Finding and Robotic Mold-Making
doi	https://doi.org/10.52842/conf.ecaade.2016.1.163
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 163-168
summary	The paper addresses a specific method for the production of custom-made, differentiated moulds for the realization of a complex, doubly-curved wall element during an international three-week architectural programme, Architectural Association (AA) Summer DLAB. The research objectives focus on linking geometry, structure, and robotic fabrication within the material agency of concrete. Computational workflow comprises the integration of structural analysis tools and real-time form-finding methods in order to inform global geometry and structural performance simultaneously. The ability to exchange information between various simulation, modelling, analysis, and fabrication software in a seamless fashion is one of the key areas where the creation of complex form meets with the simplicity of exchanging information throughout various platforms. The paper links the notions of complexity and simplicity throughout the design and fabrication processes. The aim to create a complex geometrical configuration within the simplicity of a single material system, concrete, presents itself as an opportunity for further discussion and development.
wos	WOS:000402063700018
keywords	robotic fabrication; custom form-work; generative design; structural analysis; concrete
series	eCAADe
email
last changed	2022/06/07 07:55

_id	acadia23_v1_34
id	acadia23_v1_34
authors	Gascon Alvarez, Eduardo; Curth, Alexander (Sandy); Feickert, Kiley; Martinez Schulte, Dinorah; Mueller, Caitlin; Ismail, Mohamed
year	2023
title	Algorithmic Design for Low-Carbon, Low-Cost Housing Construction in Mexico
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 34-38.
summary	Mexico is one of the most urbanized countries in the Global South, and simultaneously faces a rapidly increasing population and a deluge of inadequate housing (URBANET 2019). In 2016, it was estimated that 40 percent of all private residences in Mexico were considered inadequate by UN-Habitat (UN-Habitat 2018). As informal housing constitutes over half of all Mexican housing construction, the most vulnerable groups of the population are particularly impacted. Therefore, there is a serious need to innovate in the area of low-cost building construction for housing in Mexico. This research explores how shape-optimized concrete and earth construction could help provide adequate housing without jeopardizing the country’s commitment to sustainability.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	caadria2016_085
id	caadria2016_085
authors	Ji, Guohua
year	2016
title	Digital Generation of Chinese Ice-Ray Lattice Designs
doi	https://doi.org/10.52842/conf.caadria.2016.085
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 85-94
summary	Being a rich source of geometric forms, Chinese lattice de- signs have interested some scholars. With shape grammar and algo- rithmic approaches, the generation of Chinese lattice designs has been achieved except for that of irregular interdependently structured ice- ray designs. This paper introduced an algorithmic approach to solve the problem. The algorithm includes crack-track presetting, crack- track cutting, crack correcting, and bad shape disposing, realized by programming with Grasshopper VB script component.
keywords	Ice-ray; algorithm; designs; generation
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ascaad2016_006
id	ascaad2016_006
authors	Kyriakidis, Periklis
year	2016
title	Algorithmic Clustering of Spatial Entities - Clustering of 64 single rooms using the Self-Organizing Map algorithm
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 39-44
summary	Grouping spatial entities according to any kind of parameters has always been important both for practical and for theoretical purposes in architecture. For a long time, classification according to traditional reference systems was considered the only method to fulfil this purpose. However, in recent years, information technology has led to the hybridization and spread of design outputs, challenging the limits of applicability of these traditional reference systems and making it meaningless to refer to classification. This paper suggests the method of clustering spatial entities using user-defined reference systems. The method is demonstrated with a case study where 64 single rooms are clustered according to user-defined parameters with the use of the Self-Organizing Map. This method gives the power to the user to define and determine reference systems for the clustering of architectural projects according to their needs.
series	ASCAAD
email
last changed	2017/05/25 13:13

_id	ijac201614204
id	ijac201614204
authors	Lima, Fernando T; Jose R Kos and Rodrigo C Paraizo
year	2016
title	Algorithmic approach toward Transit-Oriented Development neighborhoods: (Para)metric tools for evaluating and proposing rapid transit-based districts
source	International Journal of Architectural Computing vol. 14 - no. 2, 131-146
summary	This article focuses on the use of computational tools to provide dynamic assessment and optimized arrangements while planning and discussing interventions in urban areas. The objective is to address the use of algorithmic systems for generating and evaluating urban morphologies guided by Transit-Oriented Development principles. Transit- Oriented Development is an urban development model that considers geometric and measurable parameters for designing sustainable cities. It advocates compact mixed-use neighborhoods within walking distance to a variety of transportation options and amenities, seeking to result in optimized infrastructure provision and energy-efficient low- carbon districts. This article presents algorithmic experiments for the optimization of a rapid transit district, through its urban morphology and services’ location, providing an accurate Transit-Oriented Development modeling. The main findings of this study highlight that the combination of Transit-Oriented Development and algorithmic–parametric tools has the potential to significantly contribute to a process of responsible planning and, ultimately, to mitigate global warming.
keywords	Transit Oriented Development, Optimization, Computational design, Urban planning
series	journal
last changed	2016/06/13 08:34

_id	acadia16_78
id	acadia16_78
authors	Parker, Matthew; Taron, Joshua M.
year	2016
title	Form-Making in SIFT Imaged Environments
doi	https://doi.org/10.52842/conf.acadia.2016.078
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 78-87
summary	Within the contemporary condition, turbulence that confronts architecture is no longer unpredictable weather patterns or wild beasts, but the unintended forces of a constantly connected digital infrastructure that demands constant attention. If, as Mark Wigley puts it, “architecture is always constructed in and against a storm” it is time for architecture to reevaluate its ability to separate us from a new storm-one that situates technology, global connectivity, human, non-human and composite users, and algorithmic architecture itself as new weather systems. Toward this end, this paper explores architecture’s ability to mediate and produce algorithmic turbulence generated through image-based sensing of the built environment. Through a close reading of Le Corbusier’s Urbanisme, we argue that for much of the 20th and the early part of the 21st century, cities have been designed to produce diagrams of smooth and homogenous flows. However, distributed personal technologies produce virtual layers that unevenly map onto the city, resulting in turbulent forces that computational platforms aim to conceal behind a visual narrative of accuracy, cohesion, anticipation, and order. By focusing on SIFT algorithms and their ability to extract n-dimensional vectors from two-dimensional images, this research explores computational workflows that mobilize turbulence towards the production of indeterminate form. These forms demarcate a new kind of challenge for both architecture and the city, whereby a cultural appetite to deploy algorithms that produce a smooth and seamless image of the world comes hand in hand with the turbulent and disruptive autonomy of those very same algorithms. By revisiting Urbanisme, a new set of architectural objectives are established that contextualize SIFTS within an urban agenda.
keywords	complex morphology, sift algorithms, architectural representation, sensate systems
series	ACADIA
type	paper
email
last changed	2022/06/07 07:59

_id	ascaad2016_004
id	ascaad2016_004
authors	Peteinarelis, Alexandros; Socrates Yiannoudes
year	2016
title	Algorithmic Thinking in Design and Construction - Working with parametric models
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 19-28
summary	This paper examines the parametric model in algorithmic design processes, using the outcome of an educational digital design and fabrication course as a case study. In its long history, algorithmic design as a form-finding method, allowed designers to manage complex non-standard associative geometries, suggesting a shift from the digital representation of form, to its systematic representation into a parametric model through code. Rather than a style or a tool, the parametric model is best defined in mathematical terms; in practice it incorporates the organizational logic of the form and the topological associations of its parts, so that a change in its constitutive parameters will invoke a concerted update of the entire model, and, iteratively, formal and structural variations. In a series of design experiments that took place at the School of Architecture of the Technical University of Crete in the spring of 2015, we used parametric models represented into visual code, from the initial conceptual stage to fabrication. From the experience and outcome of this course, we deduced that, compared to other digital formation methods, parametric models allow the designer to constantly interact with the model through the code, producing discreet variations without losing control of the design intentions, by “searching” into a wide range (albeit finite) of virtual results. This suggested a shift in culturally embedded patterns of modernist design thinking.
series	ASCAAD
email
last changed	2017/05/25 13:13

_id	sigradi2016_483
id	sigradi2016_483
authors	Quintella, Ivvy Pedrosa Cavalcante Pessôa; Flor?ncio, Eduardo Quintella; Ferreira, Ítalo Cintra
year	2016
title	Making pavilions: Os pavilh?es temporários no contexto das faculdades de arquitetura e urbanismo [Making pavilions: The temporary pavilions in the context of schools of architecture and urbanism]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.318-325
summary	This paper aims to highlight the educational potential of the association between the architectural typology of temporary pavilions and digital fabrication process for architecture and urban planning courses. The pavilion theme is being increasingly exploited in various universities in the world, in order to work new paradigms of computational algorithmic architecture and new construction process, through digital fabrication labs. In this sense, these exercises can become a privileged and highly effective learning tool, due the impact of the integrated experience between creating (design), construction (to build) and experience (to appropriate the spaces).
keywords	Temporary pavilions; Digital manufacturing; Rapid prototyping; Construction; Architecture education
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	acadia16_44
id	acadia16_44
authors	Sanchez, Jose
year	2016
title	Combinatorial design: Non-parametric computational design strategies
doi	https://doi.org/10.52842/conf.acadia.2016.044
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 44-53
summary	This paper outlines a framework and conceptualization of combinatorial design. Combinatorial design is a term coined to describe non-parametric design strategies that focus on the permutation, combination and patterning of discrete units. These design strategies differ substantially from parametric design strategies as they do not operate under continuous numerical evaluations, intervals or ratios but rather finite discrete sets. The conceptualization of this term and the differences with other design strategies are portrayed by the work done in the last 3 years of research at University of Southern California under the Polyomino agenda. The work, conducted together with students, has studied the use of discrete sets and combinatorial strategies within virtual reality environments to allow for an enhanced decision making process, one in which human intuition is coupled to algorithmic intelligence. The work of the research unit has been sponsored and tested by the company Stratays for ongoing research on crowd-sourced design.
keywords	non-parametric computational design strategies, permutations, combinatorics, building systems, game design, crowdsourcing, computation
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	caadria2016_579
id	caadria2016_579
authors	Tan, Rachel and Stylianos Dritsas
year	2016
title	Clay Robotics: Tool making and sculpting of clay with a six-axis robot
doi	https://doi.org/10.52842/conf.caadria.2016.579
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 579-588
summary	The objective of the project is to design a reproducible clay sculpting process with an industrial robotic arm using parametric con- trol to directly translate mesh geometry from Computer Aided Design (CAD) environment into a lump of clay. This is accomplished through an algorithmic design process developed in Grasshopper using the C# programming language. The design process is enabled by our robotics modelling and simulation library which provides tools for kinematics modelling, motion planning, visual simulation and networked com- munication with the robotic system. Our process generates robot joint axis angle instructions through inverse kinematics which results into linear tool paths realised in physical space. Unlike common subtrac- tive processes such as Computer Numeric Control (CNC) milling where solid material is often pulverised during machining operations, our process employs a carving technique to remove material by dis- placement and deposition due to the soft and self-adhesive nature of the clay material. Optimisation of self-cleaning paths are implemented and integrated into the sculpting process to increase pathing efficiency and end product quality. This paper documents the process developed, the obstacles faced in motion planning of the robotic system and dis- cusses the potential for creative applications in digital fabrication us- ing advanced machines that in certain terms exceed human capability yet in others are unable to reach the quality of handmade works of art.
keywords	Design computation; digital fabrication; architectural robotics
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ascaad2016_011
id	ascaad2016_011
authors	Alani, Mostafa W.
year	2016
title	Morphological Code of Historical Geometric Patterns - The Digital Age of Islamic Architecture
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 85-94
summary	This study intervenes in the long-standing paradigm that considers compositional analysis as the key to researching the Islamic Geometric Patterns (IGP). The research argues that the compositional analysis of the geometry is not solely sufficient to investigate the design characteristics of the IGP, and the better way of achieving this emerges through a consideration of the design formalism.
series	ASCAAD
email
last changed	2017/05/25 13:13

For more results click below: