Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 622

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2016_631
id	caadria2016_631
authors	Alambeigi, Pantea; Sipei Zhao, Jane Burry and Xiaojun Qiu
year	2016
title	Complex human auditory perception and simulated sound performance prediction
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 631-640
doi	https://doi.org/10.52842/conf.caadria.2016.631
summary	This paper reports an investigation into the degree of con- sistency between three different methods of sound performance evalu- ation through studying the performance of a built project as a case study. The non-controlled office environment with natural human speech as a source was selected for the subjective experiment and ODEON room acoustics modelling software was applied for digital simulation. The results indicate that although each participant may in- terpret and perceive sound in a particular way, the simulation can pre- dict this complexity to some extent to help architects in designing acoustically better spaces. Also the results imply that architects can make valid comparative evaluations of their designs in an architectur- ally intuitive way, using architectural language. The research acknowledges that complicated engineering approaches to subjective analysis and to controlling the test environment and participants is dif- ficult for architects to comprehend and implement.
keywords	Human sound perception; acoustic simulation; experiment and measurement
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2016_032
id	ascaad2016_032
authors	Alhadidi, Suleiman; Justin Mclean, Luchlan Sharah, Isabel Chia, Roger Sam
year	2016
title	Multiflight - Creating Interactive Stairs through Positive Technology
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 295-308
summary	This paper details a pedagogical project which calls for an improved design performance of the existing built environment through the use of smart technology and data-driven design. The project is an investigation into ways in which to improve the performance of a ‘pre-selected university building’ through the use of a media facade that allows for interactive experiences. Existing problems of the selected building have been identified through observation and research using a rich picture and agile approach. An underutilised staircase was selected as the focus site for a series of computational design and interactive design studies. The brief of this mini-research project aims to encourage more people to use the stairs and create a memorable experience with a technological approach through the application of a site specific interactive media installation. The project is an interactive staircase which utilises LED strips and generative sound. The project features a series of light boxes which are connected to the existing staircase balustrade. Arduino, passive infra-red sensors, and other motion detection sensors were used to allow for light and generative sound interaction with users using visual scripting tools and a generative design platform. Sensing technology was used as a real-time data-gathering device during the site analysis phase as well as an input device for the designed prototype to allow the testing of the data-driven design. This paper details the study and resultant interactive prototypes. It also discusses the exploration of performance based design ideas into design workflows and the integration of sensing tools into the design process. It concludes by identifying possible implications on using the Internet of Things concepts to facilitate the design of interactive architecture.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	caadria2016_641
id	caadria2016_641
authors	Baerlecken, D.; K. Wright, J. Reitz, N. Mueller and B. Heiermann
year	2016
title	Performative Agency of Materials: Matter agency of vernacular African pattern systems
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 641-650
doi	https://doi.org/10.52842/conf.caadria.2016.641
summary	This paper investigates an agency of materials through a design methodology that follows Martin Heidegger’s process of “Entbergen” or “unconcealing” as a non-instrumentalist understanding of tools and materials. This investigation takes place through the de- sign of a children’s theatre in South Africa where material innovation for architectural components is needed. The research studies vernacu- lar African patterns and their inherent behaviour when transferred to materials. The transference of pattern systems to architectural proto- types is discussed alongside the discussion of their technical and ar- chitectural performance criteria. Following Heidegger’s theory of “Entbergen” (“unconcealing”) the paper will demonstrate how making in this methodology becomes an “unconcealing”, which includes both digital and analogue means, linking the four causalities - causa mate- rialis, causa formalis, causa finalis, and causa efficiens – through the agency of material within an integrated process between all four caus- es. Making becomes a process in which form is generated through in- terventions within fields of forces and currents of materials, taking cause and agency into account, and standing in opposition to methods that are defined by a premeditated notion of an ideal outcome.
keywords	African patterns, making, design build, design methodology
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2016_259
id	caadria2016_259
authors	Chen, Jia-Yih and Shao-Chu Huang
year	2016
title	Adaptive Building Facade Optimisation: An integrated Green-BIM approach
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 259-268
doi	https://doi.org/10.52842/conf.caadria.2016.259
summary	This study focused on the optimal design of adaptive build- ing fac?ade for achieving better energy performance. Iterative fac?ade components design are studied between virtual and physical models with integrated tools of BIM, parametric design and sensor devices. The main objectives of this study are: (1) exploring systematic design process via the analysis of adaptive components in responsive fac?ade design; (2) developing compliance checking system for green building regulations; (3) developing optimization system for adaptive fac?ade design process. This paper demonstrated the integration of various digital design methods and concluded with the energy modelling re- sults of a demo project unit for various fac?ade component designs.
keywords	Building fac?ade design; energy performance; design optimization; parametric design; BIM
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ascaad2016_009
id	ascaad2016_009
authors	Elbasdi, Gulay; Sema Alaçam
year	2016
title	An Investigation on Growth Behaviour of Mycelium in a Fabric Formwork
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 65-74
summary	Most progress in designing mycelium-based material to date has been made by using petri dish and 3d printed geometries. In this study, reshaping capabilities of mycelium-based materials using fabric formwork is being discussed. This ongoing study is the result of a series of experiments about mycelium-based material that aims to investigate its potentials as free- form geometry. In this paper, we aim to make a comparison between initial and end shapes by implementing digital and analogue tools based on mycelium-based fabric formwork experiment. The physical experiment setup consists of different initial geometry alternatives and the deformation will be observed and measured numerically by time-based recording on top and section views. With the help of digital tools, experiments will be documented as a process of formation. We aim to discuss the potential of the usage of mycelium as a binding agent in free form geometry since mycelium acts as natural self-assembling glue. By doing so, structural potentials of the material, which is strengthened by mycelium hyphae, were examined. This study aims to contribute to the design research studies and scientific knowledge together to integrate living systems into the material design as encouraging collaborative interdisciplinary research, thereby positioning designer as a decision-maker from the very beginning of material design process.
series	ASCAAD
email
last changed	2017/05/25 13:13

_id	caadria2016_663
id	caadria2016_663
authors	Hosokawa, Masahiro; Tomohiro Fukuda, Nobuyoshi Yabuki, Takashi Michikawa and Ali Motamedi
year	2016
title	Integrating CFD and VR for indoor thermal environment design feedback
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 663-672
doi	https://doi.org/10.52842/conf.caadria.2016.663
summary	In the context of environmental consideration and im- provement of living standards, design of high performance buildings that are both comfortable and energy saving is important. Simulation tools (such as CFD) enables analysing and visualizing environmental factors (such as temperature and airflow) based on the design proper- ties and can be used to improve the building design for better perfor- mance. However, these tools have limitations in providing interactivi- ty with users for creating multiple CFD visualization results to be used for analysing design options. This research presents an integrated de- sign tool which consists of CFD and VR technologies. The proposed system visualizes CFD results in a VR environment together with ar- chitectural design. Additionally, it enables configuring CFD parame- ters within the VR environment and allows repeatedly executing simu- lation and visualizing updated results. The proposed system enables visualizing information in relationship with the actual architectural design, space configuration and thermal environment, and provides ef- ficient design feedbacks.
keywords	Interdisciplinary computational design; design feedback; indoor thermal environment; Computational Fluid Dynamics (CFD); Virtual Reality (VR)
series	CAADRIA
email
last changed	2022/06/07 07:50

_id	sigradi2016_801
id	sigradi2016_801
authors	Matson, Carrie Wendt; Sweet, Kevin
year	2016
title	Simplified for Resilience: A parametric investigation into a bespoke joint system for bamboo
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.405-411
summary	Research reveals that most of the structural failures in a natural disaster are related to improper construction assembly methodologies related to human errors. This paper aims to reduce human errors in the building process by taking advantage of computational tools, and using a renewable building material. The research investigates the creation of a novel structural system for bamboo that is able to be repaired, replaced, altered, and easily assembled to restore any damaged building structure. Bamboo is an organic product with diameters that are irregular and unpredictable. The inconsistency in this natural product requires an adaptable construction methodology that responds to its organic nature. A customised joint system is created using parametric software that quickly adapts to the irregularity of the bamboo and are then fabricated using additive printing techniques. The parametric software gives unlimited control of the joint system based on the programmed relationships between the differentiations of each unique bamboo connection. Fabricating each unique joint gives a secure connection at each intersection facilitating an adaptable architecture, whilst reducing construction waste. This paper introduces the groundwork for the implementation of “on-site” manufacturing of a framework joint system. The manufacturing utilises the power and performance of a parametric platform with the technology of bespoke three-dimensionally printed joints – a flexible system that can respond to organic materials and natural external conditions
keywords	Parametric design; Three-dimensional printing; Bamboo construction
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2016_042
id	ecaade2016_042
authors	Narangerel, Amartuvshin, Lee, Ji-Hyun and Stouffs, Rudi
year	2016
title	Daylighting Based Parametric Design Exploration of 3D Facade Patterns
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 379-388
doi	https://doi.org/10.52842/conf.ecaade.2016.2.379
wos	WOS:000402064400037
summary	A building façade plays an important role of reducing artificial lighting by introducing natural light into the interior space. A majority of research and current technology heavily focuses on the optimization of window properties such as the size, location, and glazing with the consideration of external shading device as well as the building wall in order to obtain appropriate natural lit space. In the present work, we propose a 3-dimensional approach that can explore the trade-offs between two objectives, daylight performance and electricity generation, by means of paramedic modeling and multi-objective optimization algorithm. The case study was simulated under the environmental setting of the geographical location of Incheon, Korea without any urban context. Using the proposed methods, 50 pareto-front optimal solutions were derived and investigated based on the achieved daylighting and generated electricity.
keywords	Parametric design; façade design; daylight performance; building-integrated photovoltaics; multi-objective optimization
series	eCAADe
email
last changed	2022/06/07 07:58

_id	acadia16_98
id	acadia16_98
authors	Smith, Shane Ida; Lasch, Chris
year	2016
title	Machine Learning Integration for Adaptive Building Envelopes: An Experimental Framework for Intelligent Adaptive Control
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 98-105
doi	https://doi.org/10.52842/conf.acadia.2016.098
summary	This paper describes the development of an Intelligent Adaptive Control (IAC) framework that uses machine learning to integrate responsive passive conditioning at the envelope into a building’s comprehensive conventional environmental control system. Initial results show that by leveraging adaptive computational control to orchestrate the building’s mechanical and passive systems together, there exists a demonstrably greater potential to maximize energy efficiency than can be gained by focusing on either system individually, while the addition of more passive conditioning strategies significantly increase human comfort, health and wellness building-wide. Implicitly, this project suggests that, given the development and ever increasing adoption of building automation systems, a significant new site for computational design in architecture is expanding within the post-occupancy operation of a building, in contrast to architects’ traditional focus on the building’s initial design. Through the development of an experimental framework that includes physical material testing linked to computational simulation, this project begins to describe a set of tools and procedures by which architects might better conceptualize, visualize, and experiment with the design of adaptive building envelopes. This process allows designers to ultimately engage in the opportunities presented by active systems that govern the daily interactions between a building, its inhabitants, and their environment long after construction is completed. Adaptive material assemblies at the envelope are given special attention since it is here that a building’s performance and urban expression are most closely intertwined.
keywords	model predictive control, reinforcement learning, energy performance, adaptive envelope, sensate systems
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	ascaad2016_001
id	ascaad2016_001
authors	Al-Attili, Aghlab; Anastasia Karandinou and Ben Daley
year	2016
title	Parametricism vs Materialism - Evolution of digital technologies for development
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, 597 p.
summary	We build on previous technological developments in CAAD by looking into parametric design exploration and the development of the concept of parametricism. We use the phenomenological backdrop to account for our physical experiences and encounters as well as our mental ones; both evident in the link between parametric design as a process and an outcome. In specific, we previously examined two particular metaphors. The first metaphor addressed aspects of virtual environments that resemble our physical world; In other words, computer model as physical model and digital world as material world. In this volume, we extend the exploration into aspects of virtual environments and their resemblance to physical environments by looking at ‘performance’ aspects: the way in which environments are sensed, measured, tracked and visualised. Moreover, we reflect on matters and materiality in both virtual and physical space philosophically, theoretically, practically and reflectively. The second metaphor looked into the modes and means of interaction between our bodies and such virtual environment. Here we extend the investigation to look at the ways in which measures of environmental performance influence human interaction in real environments. The exploration takes us further to look into the area of design fabrication of the built environment, and methods in which developed processes meet environmental performance requirements, and the innovative outcomes that lead to disruptive technologies getting introduced into design and we revisit parametric design under this focus area.
series	ASCAAD
type	normal paper
email
last changed	2024/02/13 14:28

_id	acadia16_450
id	acadia16_450
authors	Estevez, Alberto T.
year	2016
title	Towards Genetic Posthuman Frontiers in Architecture & Design
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 450-459
doi	https://doi.org/10.52842/conf.acadia.2016.450
summary	This paper includes a brief history about the beginning of the practical application of real genetics to architecture and design. Genetics introduces a privileged point-of-view for both biology and the digital realm, and these two are the main characters (the protagonists) in our posthuman society. With all of its positive and negative aspects, the study of genetics is becoming the cornerstone of our posthuman future precisely because it is at the intersection of both fields, nature and computation, and because it is a science that can command both of them from within—one practically and the other one theoretically. Meanwhile, through genetics and biodigital architecture and design, we are searching at the frontiers of knowledge for planetary benefit. In order to enlighten us about these issues, the hero image (Figure 1) has been created within the framework of scanning electron microscope (SEM) research on the genesic level, where masses of cells organize themselves into primigenic structures. Microscope study was carried out at the same time as the aforementioned genetic research in order to find structures and to learn typologies that could be of interest for architecture, here illustrated as an alternative landscape of the future. Behind this hero image is the laboratory’s first effort to begin the real application of genetics to architecture, thereby fighti hti ng for the sustainability of our entire planet and a better world
keywords	performance in design, material agency, biomimetics and biological design, embedded responsiveness
series	ACADIA
type	paper
email
last changed	2022/06/07 07:52

_id	ecaade2016_224
id	ecaade2016_224
authors	Gerber, David and Pantazis, Evangelos
year	2016
title	Design Exploring Complexity in Architectural Shells - Interactive form finding of reciprocal frames through a multi-agent system
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 455-464
doi	https://doi.org/10.52842/conf.ecaade.2016.1.455
wos	WOS:000402063700050
summary	This paper presents an integrated workflow for interactive design of shell structures, which couples structural and environmental analysis through a multi-agent systems (MAS) for design. The work lies at the intersection of architecture, engineering and computer science research, incorporating generative design with analytical techniques. A brief review on architectural shell structures and the structural logic of reciprocal frames is described. Through the morphological study of reciprocal frames locally we seek to inform the behavior of a MAS, which integrates form-finding techniques, with daylight factor analysis (DFA) and finite element analysis (FEA) on a global configuration. An experimental design is developed in order to explore the solution space of large span free form shells with varying topologies and boundary conditions, as well as identify the relationships between local design parameters of the reciprocal frames (i.e. number of elements, profile) and the analyses (i.e. stress distribution, solar radiation) for enabling the generation of different global design alternatives. The research improves upon design decision-making latency and certainty through harnessing geometric complexity and structural form finding for early stage design. Additionally, the research improves upon design outcomes by establishing a feedback loop between design generation, analysis and performance.
keywords	Generative design; computational design; multi-agent systems; shell structures; reciprocal frames; form finding; parametric design
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia16_12
id	acadia16_12
authors	Gerber, David Jason; Pantazis, Evangelos
year	2016
title	A Multi-Agent System for Facade Design: A design methodology for Design Exploration, Analysis and Simulated Robotic Fabrication
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 12-23
doi	https://doi.org/10.52842/conf.acadia.2016.012
summary	For contemporary design practices, there still remains a disconnect between design tools used for early stage design exploration and performance analysis, and those used for fabrication and construction of complex tectonic architectural systems. The research brings forward downstream fabrication constraints into the up-stream design exploration and design decision making. This paper addresses the issues of developing an integrated digital design work-flow and details a research framework for the incorporation of environmental performance into a robotic fabrication for early stage design exploration and generation of intricate and complex alternative façade designs. The method allows the user to import a design surface, define design parameters, set a number of environmental performance objectives, and then simulate and select a robotic construction strategy. Based on these inputs, design alternatives are generated and evaluated in terms of their performance criteria in consideration of their robotically simulated constructability. In order to validate the proposed framework, an experimental case study of office building façade designs that are generatively created from a multi-agent system for design methodology is design explored and evaluated. Initial results define a heuristic function for improving simulated robotic constructability and illustrate the functionality of our prototype. Project limitations and future research steps are then discussed.
keywords	generative design, multi-objective design optimization, robotic fabrication, simulation, design performance, design decision making
series	ACADIA
type	paper
email
last changed	2022/06/07 07:51

_id	ecaade2016_099
id	ecaade2016_099
authors	Guerritore, Camilla and Duarte, José Pinto
year	2016
title	Manifold Façades - A grammar-based approach for the adaptation of office buildings into housing
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 189-198
doi	https://doi.org/10.52842/conf.ecaade.2016.2.189
wos	WOS:000402064400018
summary	This article focuses on the use of shape grammars in rehabilitation processes to transform existing, obsolete building stocks into required building types. It is described how a grammar-based transformation methodology can lead to the development of a design tool that enables the exploration of preliminary design solutions and the evaluation of their impact in terms of massing, functional programme and, eventually, cost and energetic behaviour. The goal is to assess the capacity of an existing building to be adapted to a different use. The article is focused on the transformation grammar. In particular, it is investigated the transformation of "office building types" into "residential building types", aiming at defining a quicker and more informed decision-making process. Future work will be concerned with evaluating the performance of the solutions generated by the grammar.
keywords	Rehabilitation; office buildings; adaptive reuse; addition strategy; shape grammars
series	eCAADe
email
last changed	2022/06/07 07:51

_id	ascaad2016_016
id	ascaad2016_016
authors	Hadia, Hatem A.; Soofia T. E. Ozkan
year	2016
title	Modelling in Architecture - physical or virtual?
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 135-144
summary	The use of models is one of the oldest media for creating, communicating and representing ideas throughout the ages. An investigation into the nature and characteristics of two modelling techniques in architectural design, i.e. physical and digital modeling, was conducted in the educational and professional domains in two countries. The aim of this study was to establish: (a) the degree of tangibility in model making as opposed to conventional and computational design approach; and (b) the iconic limitation of both types of modelling in design. To this end a survey was carried out among practising architects and students of architecture to establish their preferences and practices with respect to physical and virtual modelling. Some face-to-face interviews were conducted and an online questionnaire was distributed to both the aspiring and established architects. Data gathered through the questionnaire survey, interviews and photographs of the modelling process was analysed to come to tangible conclusions. Hence, this paper presents an insight into the merits and demerits of both the physical and virtual modeling techniques as seen through the eyes of professional and training architects.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	ecaade2016_241
id	ecaade2016_241
authors	Janssen, Patrick, Stouffs, Rudi, Mohanty, Akshata, Tan, Elvira and Li, Ruize
year	2016
title	Parametric Modelling with GIS
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 59-68
doi	https://doi.org/10.52842/conf.ecaade.2016.2.059
wos	WOS:000402064400005
summary	Existing urban planning and design systems and workflows do not effectively support a fast iterative design process capable of generating and evaluating large-scale urban models. One of the key issues is the lack of flexibility in workflows to support iterative design generation and performance analyses, and easily integrate into design and planning processes. We present and demonstrate a parametric modelling system, Möbius, that can easily be linked to Geographic Information Systems for creating modular workflows, provides a novel approach for visual programming that integrates associative and imperative programming styles, uses a rich topological data structure that allows custom data attributes to be added to geometric entities at any topological level, and is fully web-based. The demonstration consists of five main stages that alternate between QGIS and Möbius, generating and analysing an urban model reflecting on site conditions and using a library of parametric urban typologies, and uses as a case study an urban design studio project in which the students sketched a set of rules that defined site coverage and building heights based on the proximity to various elements in the design.
keywords	generative design; urban planning; Geographic Information Systems; parametric modelling
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2016_271
id	caadria2016_271
authors	Khoo, Chin Koi and Flora Salim
year	2016
title	Painterface: An integrated responsive architectural interface
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 271-280
doi	https://doi.org/10.52842/conf.caadria.2016.271
summary	Interface design is one of the main research areas in human- computer interaction (HCI). In computer science, many HCI research- ers and designers explore novel interface designs with cutting-edge technology, but few investigate alternative interfaces for existing built environments, especially in the area of architecture. In this paper, we investigate alternative interface designs for existing architectural ele- ments—such as walls, floors, and ceilings—that can be created with off-the-shelf materials. Instead of merely serving as discrete sensing and display devices integrated to an existing building’s surface, these liquid and thin materials act as interventions that can be ‘painted’ on a surface, transforming it into an architectural interface. This interface, Painterface, is a responsive material intervention that serves as an an- alogue, wall-type media interface that senses and responds to people’s actions. Painterface is equipped with three sensing and responsive ca- pacities: touch, sound, and light. While the interface’s touch capacity performs tactile sensing, its sound-production and illumination capaci- ties emit notes and light respectively. The outcomes of this research suggest the possibility of a simple, inexpensive, replaceable, and even disposable interface that could serve as an architectural intervention applicable to existing building surfaces.
keywords	Human-computer interaction; integrated interface; sensing and responsive architectural interface
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	caadria2016_621
id	caadria2016_621
authors	Lee, Ji Ho and Ji-Hyun Lee
year	2016
title	Cultural Difference in Colour Usages for Building Exteriors Focusing on Theme Park Buildings
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 621-630
doi	https://doi.org/10.52842/conf.caadria.2016.621
summary	The notion of globalisation has become widely spread in various fields, and accordingly, it is increasingly more important to take account of indigenous culture characteristics in each field. An as- pect of achieving globalisation, globalization with local consideration, is to consider the difference of colour usage between distinct cultures. This study suggests an approach to investigate the colour difference between eastern and western cultures with the case analysis of build- ing fac?ade colours in Disneyland Paris and Tokyo Disneyland. We an- alysed cultural colour usage characteristics and derived tendencies for both Paris and Tokyo Disneyland building fac?ade colours. To do this, we use image based k-means clustering algorithm and CIELAB colour space distances to explore colour characteristics. Our analysis indi- cates an overall colour usage tendency that Paris uses more green and bluish colours and Tokyo uses more red and yellowish colours for building fac?ades, based on CIELAB colour space values. The major motivation of this paper was to reflect the atmosphere and the mood of the space that can be easily felt but not readily expressible into a cultural colour palette. Eventually, by finding the characteristics of perceived colours, we hope to create a colour recommendation system for different cultures based on cultural clues.
keywords	Culture; colour usage; colour clustering; building fac?ade; computational approach
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ascaad2016_025
id	ascaad2016_025
authors	Mohamadin, Mahmoud F.; Ahmed A. Abouaiana and Hala H. Wagih
year	2016
title	Parametric Islamic Geometric Pattern for Efficient Daylight and Energy Performance - Façade retrofit of educational space in hot arid climate
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 227-236
summary	The purpose of this paper is to reach an optimal Islamic geometric pattern (IGP) shading screen design in terms of daylight and energy performance in an existing educational design studio (EDS) using generative design and simulation techniques. The study was carried out in a hot arid climate, in a typical EDS in 6th October University, located in Cairo, Egypt, and the study focused on the north-east oriented façade. Grasshopper for Rhino was utilized to generate the IGP parametric variations. Diva-For-Rhino which performs daylight analysis using Radiance / DAYSIM, and Design Builder which performs thermal load simulations using EnergyPlus were utilized in simulation. The results of the study achieved the required daylight levels with significant reduction of energy consumption levels of cooling load. This shows the affordance of the parametric IGP shading screens in façade treatment for achieving both efficient daylight and energy performance in educational design studio in hot arid climates.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	ecaade2016_075
id	ecaade2016_075
authors	Noel, Vernelle A. A.
year	2016
title	Crafting as Inquiry into Computation - Exploring wire-bending in traditional practice and design education
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 311-320
doi	https://doi.org/10.52842/conf.ecaade.2016.1.311
wos	WOS:000402063700035
summary	In an effort to sustain and revitalize the dying craft of wire-bending, I present the development of three novel approaches: Digital Crafting, Computational Crafting, and Crafting Fabrication. Computation and digital technology were integrated with traditional wire-bending principles to design and fabricate artifacts. In this work, I present three artifacts resulting from these novel approaches, and analyze how these methods may be used in design education and practice. Our findings benefit the practice because it offers opportunities for teaching computational and traditional skills to older and younger generations through wire-bending.
keywords	wire-bending; Bailey-Derek Grammar; craft; computational design; fabrication
series	eCAADe
email
last changed	2022/06/07 07:58

For more results click below: