Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 623

Reformat results as: short short into frame detailed detailed into frame

_id	ecaade2016_028
id	ecaade2016_028
authors	Asanowicz, Aleksander
year	2016
title	Digital Architectural Composition - 30 years of experience and experimentation
doi	https://doi.org/10.52842/conf.ecaade.2016.1.195
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 195-203
summary	In this paper the evolution of architectural composition teaching will be presented and discussed. The main point of these deliberations is to consider how digital methods and technologies have influenced the teaching methods and the understanding of compositional rules/principles by students. Another important factor which will be analysed, is the difficulties faced by teachers in the evaluation of students' work. The paper is divided into four parts, each of which concerns different approaches to architectural composition teaching. In the first part the historical background of architectural composition teaching is presented. In the second part traditional teaching methods is described, the third concerns teaching of digital architectural composition, and the fourth - digital architectural composition in virtual space. At the end of each section, the advantages and disadvantages of the discussed methods are presented. These disadvantages were a stimulus for changes in the teaching process, which was enabled thanks to the development of digital technologies (software and hardware) during the last 20 years. The last part of the paper will be devoted to the presentation of potential directions of development of architectural composition teaching methods.Please write your abstract here by clicking this paragraph.
wos	WOS:000402063700022
keywords	Architectural Composition; digital modelling; Virtual Reality
series	eCAADe
email
last changed	2022/06/07 07:54

_id	architectural_intelligence2023_11
id	architectural_intelligence2023_11
authors	Hua Chai & Philip F. Yuan
year	2023
title	Hybrid intelligence
doi	https://doi.org/https://doi.org/10.1007/s44223-023-00029-w
source	Architectural Intelligence Journal
summary	Alongside shifts in the technological landscape, the origin of creativity in architectural design has been consistently evolving. According to French philosopher Bernard Stiegler, the architectural design process is never individualistic but rather shaped by the complex interaction between human creativity and what he terms the “pre-individual milieu”, the synthesis of various factors such as cultural heritage, technological innovation (Stiegler, 2016). Over the last three decades, the emergence of digital technologies such as the Internet of Things, virtual reality, and artificial intelligence has significantly enhanced the dynamism and diversity of human–machine communication. With the advancement of digital technologies in the field of architecture, artificial intelligence, machine intelligence, and material intelligence are increasingly integrated into the creative process. In the form of hybrid intelligence, this shift expands the scope of architectural creativity and creative agency beyond the mere intelligent landscape of the human mind. As suggested by architectural theorist Antoine Picon, “another possibility is to consider the pairing of man and machine as a new composite subject……This proposition is suggested by various contemporary reflections on computer technologies and their anthropological dimension” (Picon, 2011).
series	Architectural Intelligence
email
last changed	2025/01/09 15:00

_id	ecaade2016_190
id	ecaade2016_190
authors	Siala, Aida, , Najla Allani, Halin, Gilles and , Mohamed Bouattour
year	2016
title	Toward Space Oriented BIM Practices
doi	https://doi.org/10.52842/conf.ecaade.2016.2.653
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 653-662
summary	When performing design tasks, architects think in terms of space, and act on physical elements. They often use various representation means to shape and to communicate the complex aspects of space. Architectural representation is often driven by visual perception whilst current BIM practices seem to be based on semantics associated with scheduling building items (element, position, quantity, etc.). The reduction of architectural sensitive approaches to merely technical ones, reveals only quantitative and restrictive information that does not reflect the architect's multi-sensorial experience. This paper examines some recent model proposals which include descriptions of architectural space concept, and tries to suggest a possible synthesis of this work. It focuses on cooperative practices necessary to unveil the sensitive dimension of the architectural design, and presents a state of existing BIM tools based on relevant tasks used in these practices in order to acquire more knowledge about the concepts which ensure a cooperative work taking into account the sensitive spatial aspects.
wos	WOS:000402064400066
keywords	Cooperative design; Architectural space; BIM; Qualitative property; Topology
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ijac201614206
id	ijac201614206
authors	Yanagawa, Kane
year	2016
title	ReIndustrializing Architecture
source	International Journal of Architectural Computing vol. 14 - no. 2, 158-166
summary	After decades of improving the efficiency and economy of our existing building ecology, instruments of the Third Industrial Revolution are redefining the practice of architecture, both internally and externally. This article focuses on the employment of the Constrained Design Hysteresis methodology as a mediating strategy, in which computational tools for content creation and fabrication can merge in post-industrial societies to effectively reindustrialize the fields of architectural design manufacturing and building. Such reformation of the accepted norms of architectural building practice do not represent a regression of the profession to a pre-industrial mode of building craftsmanship, but an evolution into one that directly addresses various shortcomings of global industrialization, ranging from restrictions imposed by mass production to the creation of social class disparity. In this context, the application of computational tools and processes can both empower and liberate design individuals through the restructuring of the existing industrial manufacturing ecosystems.
keywords	Digital fabrication, design automation, third industrial revolution, constrained design hysteresis, social reform
series	journal
last changed	2016/06/13 08:34

_id	ecaade2016_025
id	ecaade2016_025
authors	Roman, Miro
year	2016
title	Abstract Object in the World of Data - A Play of Books - Symbolicity of Information as Potential for Architectural Articulation
doi	https://doi.org/10.52842/conf.ecaade.2016.2.287
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 287-296
summary	We are beyond representation; our abstract objects are symbolic; figures, fugues, faces, masks, atoms, elements, characters, avatars, indexes. It is about infusing, narrating, doping, context, information and masterful articulations. Concepts become spectrums; they live like the memory or traces of things that have been; they are not documents - they are animate. In this context interest of this paper is to see how can an image of book in the world of data be different than Kevin Lynch's systemic image of the city (Lynch 1960). Lynch has abstracted from the physical city. He is representing cities on the level of text, grammars and structures. What if one takes his exercise seriously and starts to play with text on the level on information, data, lists and indexes? What is an image of a book, its character, mood, how many faces does it have? This is a going to be a drama.
wos	WOS:000402064400028
keywords	information; text; image; abstract object; generic
series	eCAADe
email
last changed	2022/06/07 07:56

_id	acadia23_v1_220
id	acadia23_v1_220
authors	Ruan, Daniel; Adel, Arash
year	2023
title	Robotic Fabrication of Nail Laminated Timber: A Case Study Exhibition
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 220-225.
summary	Previous research projects (Adel, Agustynowicz, and Wehrle 2021; Adel Ahmadian 2020; Craney and Adel 2020; Adel et al. 2018; Apolinarska et al. 2016; Helm et al. 2017; Willmann et al. 2015; Oesterle 2009) have explored the use of comprehensive digital design-to-fabrication workflows for the construction of nonstandard timber structures employing robotic assembly technologies. More recently, the Robotically Fabricated Structure (RFS), a bespoke outdoor timber pavilion, demonstrated the potential for highly articulated timber architecture using short timber elements and human-robot collaborative assembly (HRCA) (Adel 2022). In the developed HRCA process, a human operator and a human fabricator work alongside industrial robotic arms in a shared working environment, enabling collaborative fabrication approaches. Building upon this research, we present an exploration adapting HRCA to nail-laminated timber (NLT) fabrication, demonstrated through a case study exhibition (Figures 1 and 2).
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	ecaade2017_007
id	ecaade2017_007
authors	Wurzer, Gabriel, Lorenz, Wolfgang E., Cerovsek, Tomo and Martens, Bob
year	2017
title	Contrasting Publications in Design and Scientific Research
doi	https://doi.org/10.52842/conf.ecaade.2017.1.385
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 385-394
summary	This paper explores the differences between 'design' and 'science' papers published at eCAADe conferences through use of automatic classification. The latter is conducted using a set of differentiating criteria (e.g. number of figures determines a paper to be either 'design' or 'science') which are calibrated with the help of a manual selection of papers from eCAADe 2015 as ground truth. Results show that we predict 83% of the papers correctly; experiments using data from eCAADe 2014 until eCAADe 2016 furthermore show the stability of our results. However, we are not so much after the development this automatic classification but rather want to characterize the two research cultures of design and science. This is achieved by taking a close look at the differentiating criteria, which can inform tools such as ProceeDings over possible future directions and adaptation needs.
keywords	Differentiation; Design; Science; ProceeDings; CumInCAD
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ascaad2016_049
id	ascaad2016_049
authors	Abdelsabour, Inas; Heba Farouk
year	2016
title	Impact of Using Structural Models on Form Finding - Incorporating Practical Structural Knowledge into Design Studio
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 483-492
summary	Physical Models as an architectural design tool, had major effect on architecture learning process. In structural form finding, it helped in improving visual design thinking to track form creation processes during form finding design stage. The aim is to study the impact of using physical models for second year architecture students in design studios learning. By analyzing and comparing students’ performance and progress; to clarify the effect of using physical models as a tool for designing progression, followed by analytical study on the students' structural models, in order to investigate the influence of models on their design educational progress. Research achieved that there were three basic phases the students pass through during form finding process when used manual physical models that improve the students' design capability.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ascaad2016_001
id	ascaad2016_001
authors	Al-Attili, Aghlab; Anastasia Karandinou and Ben Daley
year	2016
title	Parametricism vs Materialism - Evolution of digital technologies for development
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, 597 p.
summary	We build on previous technological developments in CAAD by looking into parametric design exploration and the development of the concept of parametricism. We use the phenomenological backdrop to account for our physical experiences and encounters as well as our mental ones; both evident in the link between parametric design as a process and an outcome. In specific, we previously examined two particular metaphors. The first metaphor addressed aspects of virtual environments that resemble our physical world; In other words, computer model as physical model and digital world as material world. In this volume, we extend the exploration into aspects of virtual environments and their resemblance to physical environments by looking at ‘performance’ aspects: the way in which environments are sensed, measured, tracked and visualised. Moreover, we reflect on matters and materiality in both virtual and physical space philosophically, theoretically, practically and reflectively. The second metaphor looked into the modes and means of interaction between our bodies and such virtual environment. Here we extend the investigation to look at the ways in which measures of environmental performance influence human interaction in real environments. The exploration takes us further to look into the area of design fabrication of the built environment, and methods in which developed processes meet environmental performance requirements, and the innovative outcomes that lead to disruptive technologies getting introduced into design and we revisit parametric design under this focus area.
series	ASCAAD
type	normal paper
email
last changed	2024/02/13 14:28

_id	ascaad2016_052
id	ascaad2016_052
authors	Al-Badry, Sally; Cesar Cheng, Sebastian Lundberg and Georgios Berdos
year	2016
title	Living on the Edge - Reinventing the amphibiotic habitat of the Mesopotamian Marshlands
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 513-526
summary	The Mesopotamian Marshlands form one of the first landscapes where people started to transform and manipulate the natural environment in order to sustain human habitation. For thousands of years, people have transformed natural ecosystems into agricultural fields, residential clusters and other agglomerated environments to sustain long-term settlement. In this way, the development of human society has been intricately linked to the extraction, processing and consumption of natural resources. The Mesopotamian Marshlands, located in one of the hottest and most arid areas on the planet, formed a unique wetlands ecosystem, which apart from millions of people, sustained a very high number of wildlife and endemic species. Several historical, political, social and climatic changes, which densely occurred during the past century, completely destroyed the unique civilisation of the area, made all the wild flora and fauna disappear and forced hundreds of thousands of people to migrate. During the last decade, many efforts have been made to restore the marshlands. However, these efforts are lacking a comprehensive design strategy, coherent goals and deep understanding of the complex current geopolitical situation, making the restoration process an extremely difficult task. This work aims at providing strategies for recovering the Mesopotamian Marshlands, organising productive functions in order to sustain the local population and design a new inhabitation model, using advanced computational tools while taking into account the extreme climatic conditions and several unique cultural aspects. Part of the aim of this work is to advance the use of computation and explore the opportunities that digital tools afford in helping find solutions to complex design problems where various design variables need to be coordinated to satisfy the design goals. Today, advanced computation enables designers to use population consumption demands, ecological processes and environmental inputs as design parameters to develop more robust and resilient regional planning strategies. This work has the double aim of first, presenting a framework for re-inhabiting the Marshlands of Mesopotamia. Second, the work suggests a design methodology based on computer-aided design for developing and organising productive functions and patterns of human occupation in wetland environments.
series	ASCAAD
email
last changed	2017/05/25 13:34

_id	caadria2016_631
id	caadria2016_631
authors	Alambeigi, Pantea; Sipei Zhao, Jane Burry and Xiaojun Qiu
year	2016
title	Complex human auditory perception and simulated sound performance prediction
doi	https://doi.org/10.52842/conf.caadria.2016.631
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 631-640
summary	This paper reports an investigation into the degree of con- sistency between three different methods of sound performance evalu- ation through studying the performance of a built project as a case study. The non-controlled office environment with natural human speech as a source was selected for the subjective experiment and ODEON room acoustics modelling software was applied for digital simulation. The results indicate that although each participant may in- terpret and perceive sound in a particular way, the simulation can pre- dict this complexity to some extent to help architects in designing acoustically better spaces. Also the results imply that architects can make valid comparative evaluations of their designs in an architectur- ally intuitive way, using architectural language. The research acknowledges that complicated engineering approaches to subjective analysis and to controlling the test environment and participants is dif- ficult for architects to comprehend and implement.
keywords	Human sound perception; acoustic simulation; experiment and measurement
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2016_046
id	ascaad2016_046
authors	Albarakat, Reem; Gehan Selim
year	2016
title	Radicalism vs. Consistency - The Cyber Influence on Individuals’ Non-Routine Uses in the Heritage Public Spaces of Cairo
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 451-460
summary	Since the emergence of the concept of user-generated content websites – Web 2.0, Internet communications have developed as a powerful personal and social phenomenon. Many Internet applications have become partially or entirely related to the concept of social network; and cyberspace has become a space about ‘us’ not ‘where’ we are. This paper investigates the theoretical grounds of the effect of cyber experience on changing the individuals’ uses of the public spaces, and sustaining this change through maintaining the ties and reciprocal influence between actions in physical and cyber spaces. It aims at examining the impact of cyber territories on the perception, definition and effectiveness of personal space within different circumstances; and its role in changing the uses of spaces where people used to act habitually. The personal space, here, will be represented as the core of both: change and consistency – the space of bridging the reciprocal effect of cyber and physical counterparts, which is transformed through the experience of physical events mediated into the cyberspace. The paper is part of a study which looks at the case of Tahrir Square during the Egyptian political movement in 2011. We will compare the activists’ actions and practices in the Square during different events of non-routine use of the square and its surroundings. The case study will show the level of consistency in the features of the produced personal space within different waves of the revolutionary actions for all that different circumstances, motivations and results.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ascaad2016_032
id	ascaad2016_032
authors	Alhadidi, Suleiman; Justin Mclean, Luchlan Sharah, Isabel Chia, Roger Sam
year	2016
title	Multiflight - Creating Interactive Stairs through Positive Technology
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 295-308
summary	This paper details a pedagogical project which calls for an improved design performance of the existing built environment through the use of smart technology and data-driven design. The project is an investigation into ways in which to improve the performance of a ‘pre-selected university building’ through the use of a media facade that allows for interactive experiences. Existing problems of the selected building have been identified through observation and research using a rich picture and agile approach. An underutilised staircase was selected as the focus site for a series of computational design and interactive design studies. The brief of this mini-research project aims to encourage more people to use the stairs and create a memorable experience with a technological approach through the application of a site specific interactive media installation. The project is an interactive staircase which utilises LED strips and generative sound. The project features a series of light boxes which are connected to the existing staircase balustrade. Arduino, passive infra-red sensors, and other motion detection sensors were used to allow for light and generative sound interaction with users using visual scripting tools and a generative design platform. Sensing technology was used as a real-time data-gathering device during the site analysis phase as well as an input device for the designed prototype to allow the testing of the data-driven design. This paper details the study and resultant interactive prototypes. It also discusses the exploration of performance based design ideas into design workflows and the integration of sensing tools into the design process. It concludes by identifying possible implications on using the Internet of Things concepts to facilitate the design of interactive architecture.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ascaad2016_008
id	ascaad2016_008
authors	Armstrong, Logan; Guy Gardner and Christina James
year	2016
title	Evolutionary Solar Architecture - Generative Solar Design Through Soft Forms and Rigid Logics
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 55-64
summary	This paper describes the development of a workflow for the production of a net zero off-grid research cabin. The workflow deploys a number of affiliated parametric software packages as a form finding tool for the exterior envelope of this structure, with a focus on passive solar design as a generative formal driver. The design was required to incorporate the spatial and programmatic needs of the users in a compact, barrier free, net zero building. Simultaneously, the research question asked the designers to harness the potential of digital design in the consideration of future fabrication techniques, in order to optimize the building’s performance and the speed and quality of assembly once the project moves into construction. Parameters considered include solar exposure, external surface area, cost, fabrication, functionality, and aesthetic criteria. This project was developed by a multidisciplinary team of graduate students at the University of Calgary.
series	ASCAAD
email
last changed	2017/05/25 13:13

_id	caadria2016_013
id	caadria2016_013
authors	Aschwanden, Gideon D.P.A.
year	2016
title	Neighbourhood detection with analytical tools
doi	https://doi.org/10.52842/conf.caadria.2016.013
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 13-22
summary	The increasing population size of cities makes the urban fabric ever more complex and more disintegrated into smaller areas, called neighbourhoods. This project applies methods from geoscience and software engineering to the process of identification of those neighbourhoods. Neighbourhoods, by nature, are defined by connec- tivity, centrality and similarity. Transport and geospatial datasets are used to detect the characteristics of places. An unsupervised learning algorithm is then applied to sort places according to their characteris- tics and detect areas with similar make up: the neighbourhood. The at- tributes can be static like land use or space syntax attributes as well as dynamic like transportation patterns over the course of a day. An un- supervised learning algorithm called Self Organizing Map is applied to project this high dimensional space constituting of places and their attributes to a two dimensional space where proximity is similarity and patterns can be detected – the neighbourhoods. To summarize, the proposed approach yields interesting insights into the structure of the urban fabric generated by human movement, interactions and the built environment. The approach represents a quantitative approach to ur- ban analysis. It reveals that the city is not a polychotomy of neigh- bourhoods but that neighbourhoods overlap and don’t have a sharp edge.
keywords	Data analytics; urban; learning algorithms; neighbourhood delineation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	caadria2016_343
id	caadria2016_343
authors	Asriana, Nova and Aswin Indraprastha
year	2016
title	Making Sense of Agent-based Simulation: Developing Design Strategy for Pedestrian-centric Urban Space
doi	https://doi.org/10.52842/conf.caadria.2016.343
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 343-352
summary	This study investigates the relationships of field observa- tion, multi-agent simulation and space-syntax theory in spatial config- uration for developing design strategy for a case study, a tourist hub area in Musi Riverside, Palembang. Having such potential advantage and to tackle existing social and urban issues, our study developed a design approach based on multi-agent simulation enhanced by space syntax theory. The goal of this study is a deep understanding of multi agent simulation through mechanism of validation using field obser- vation and by taking into account the existing urban features. The purpose is to develop design strategy of pedestrian-centric urban space to be functioned as a tourist hub based on computational modelling. Following the paths result of pedestrian flow by multi-agents simula- tion, we elaborated the analysis of facility programming by means of Space Syntax theory. It shows the ranking of facility programs based on their relative connectivity and integration. By merging this result, it assembles programs and their circulation spaces by means of compu- tational simulation. Experimenting in both fields show a novel ap- proach for pedestrian-centric design in urban scale, particularly since behavioural models rarely used in early stage of design process. It shows that multi-agent simulation should be coupled with field obser- vation.
keywords	Multi-agents simulation; network analysis; Space Syntax theory; design strategy; urban space
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2016_023
id	ascaad2016_023
authors	Ayoub, Mohammed
year	2016
title	Associative Parametric Urbanism - A computational approach to parameterization of conceptual design phase
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 207-216
summary	Urban planning projects usually comprise a complex set of objectives that needs to be addressed by developing a number of proposals. This requires a lot of repetitive steps resulting in fewer and slowly-developed design alternatives. To address the limitations of the existing system, this research introduces the merge of associative parametric design tools with the conceptual design phase of urban planning process to propose a Parameterized Conceptual Design Phase. The developed Associative Algorithm within the proposed phase represents a computational approach that translates a site’s settings into local attractors to define urban fabric, and provide the designer with variations for optimal solutions. The Informal Settlement of Ezbet El Matar, Alexandria, is selected as the case study of this approach.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	caadria2016_641
id	caadria2016_641
authors	Baerlecken, D.; K. Wright, J. Reitz, N. Mueller and B. Heiermann
year	2016
title	Performative Agency of Materials: Matter agency of vernacular African pattern systems
doi	https://doi.org/10.52842/conf.caadria.2016.641
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 641-650
summary	This paper investigates an agency of materials through a design methodology that follows Martin Heidegger’s process of “Entbergen” or “unconcealing” as a non-instrumentalist understanding of tools and materials. This investigation takes place through the de- sign of a children’s theatre in South Africa where material innovation for architectural components is needed. The research studies vernacu- lar African patterns and their inherent behaviour when transferred to materials. The transference of pattern systems to architectural proto- types is discussed alongside the discussion of their technical and ar- chitectural performance criteria. Following Heidegger’s theory of “Entbergen” (“unconcealing”) the paper will demonstrate how making in this methodology becomes an “unconcealing”, which includes both digital and analogue means, linking the four causalities - causa mate- rialis, causa formalis, causa finalis, and causa efficiens – through the agency of material within an integrated process between all four caus- es. Making becomes a process in which form is generated through in- terventions within fields of forces and currents of materials, taking cause and agency into account, and standing in opposition to methods that are defined by a premeditated notion of an ideal outcome.
keywords	African patterns, making, design build, design methodology
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	sigradi2016_449
id	sigradi2016_449
authors	Barnuevo, Thales; Sordi, Lucas De; Silva, Leandro; Silva, Neander Furtado; Aviani, Francisco Leite
year	2016
title	Componente Responsivo para Fachadas: Analise e Validaç?o [Responsive component for Facades: analysis and validation]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.754-760
summary	The following text reports to the development of a climatic responsive component for facades programmed to respond to the movement of the sun as a way to reduce solar gain and glare into the interior ambient with the aim to reduce building’s need for energy. This research is part of a methodology of tests to verify the relevance to develop, in the future, a real scale model into the Brazilian context.
keywords	Ative facade; Responsive; Adaptive; Control
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia16_432
id	acadia16_432
authors	Beaman, Michael Leighton
year	2016
title	Landscapes After The Bifurcation of Nature: Models for Speculative Landformations
doi	https://doi.org/10.52842/conf.acadia.2016.432
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 432-439
summary	Landformations have not historically been the purview of design production or intervention. Whether it is the spatial extensions in which they emerge, the temporal extensions in which they operate, the complexities of their generative and sustaining processes, or a cultural and institutional deference to a notion of natural processes, designers as individuals or design as a discipline has not treated landformation as an area of design inquiry. But the inability to grasp nature fully has not stopped geological-scale manipulation by humans. In fact, anthropogenic activity is responsible for the re-formation of more of the Earth’s surface than all other agents combined. And yet as designers we often disregard this transformation as a design problem, precisely because it eludes the artifices of information visualization employed by designers. This paper examines ongoing research into the generation of speculative landformations through an analysis of underlying geological and anthropogenic processes as the quantitative basis for creating generative computational models (figure 1). The Speculative Landformations Project posits human geological-scale activity as a design problem by expanding the operability and agency of environmental design practice through hybrid human/digital computations.
keywords	design decision-making, simulation and design optimization, responsive urban and landscape systems, big data
series	ACADIA
type	paper
email
last changed	2022/06/07 07:54

For more results click below: