Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 624

Reformat results as: short short into frame detailed detailed into frame

_id	caadria2016_631
id	caadria2016_631
authors	Alambeigi, Pantea; Sipei Zhao, Jane Burry and Xiaojun Qiu
year	2016
title	Complex human auditory perception and simulated sound performance prediction
doi	https://doi.org/10.52842/conf.caadria.2016.631
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 631-640
summary	This paper reports an investigation into the degree of con- sistency between three different methods of sound performance evalu- ation through studying the performance of a built project as a case study. The non-controlled office environment with natural human speech as a source was selected for the subjective experiment and ODEON room acoustics modelling software was applied for digital simulation. The results indicate that although each participant may in- terpret and perceive sound in a particular way, the simulation can pre- dict this complexity to some extent to help architects in designing acoustically better spaces. Also the results imply that architects can make valid comparative evaluations of their designs in an architectur- ally intuitive way, using architectural language. The research acknowledges that complicated engineering approaches to subjective analysis and to controlling the test environment and participants is dif- ficult for architects to comprehend and implement.
keywords	Human sound perception; acoustic simulation; experiment and measurement
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2016_025
id	ascaad2016_025
authors	Mohamadin, Mahmoud F.; Ahmed A. Abouaiana and Hala H. Wagih
year	2016
title	Parametric Islamic Geometric Pattern for Efficient Daylight and Energy Performance - Façade retrofit of educational space in hot arid climate
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 227-236
summary	The purpose of this paper is to reach an optimal Islamic geometric pattern (IGP) shading screen design in terms of daylight and energy performance in an existing educational design studio (EDS) using generative design and simulation techniques. The study was carried out in a hot arid climate, in a typical EDS in 6th October University, located in Cairo, Egypt, and the study focused on the north-east oriented façade. Grasshopper for Rhino was utilized to generate the IGP parametric variations. Diva-For-Rhino which performs daylight analysis using Radiance / DAYSIM, and Design Builder which performs thermal load simulations using EnergyPlus were utilized in simulation. The results of the study achieved the required daylight levels with significant reduction of energy consumption levels of cooling load. This shows the affordance of the parametric IGP shading screens in façade treatment for achieving both efficient daylight and energy performance in educational design studio in hot arid climates.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	ascaad2022_033
id	ascaad2022_033
authors	Rohani, Nima; Kim, Ikhwan
year	2022
title	Urban Design Analysis of New York City's Virtual Model: The Case of Tom Clancy's The Division
source	Hybrid Spaces of the Metaverse - Architecture in the Age of the Metaverse: Opportunities and Potentials [10th ASCAAD Conference Proceedings] Debbieh (Lebanon) [Virtual Conference] 12-13 October 2022, pp. 188-201
summary	People have started spending time with digital tools and virtual worlds to escape reality's horrors. However, designed spaces are more than the players' needs, especially those digital games that their stories involve urban environments. This inefficiency causes spending futile efforts both in time and cost for the digital games' productions; The urban environments in these digital games are replicas of real-world cities. Some companies use some techniques for downgrading replicas. Therefore, this study aims to uncover the used techniques for designing Tom Clancy's The Division (2016). By using reverse engineering methodology and qualitative comparative analysis, the in-game map compared with the real-world map. Based on the results, the used techniques allowed the designers to scale down the game environment to be 2.5 times smaller than the actual city. Rather, verisimilitude is achieved by combining sufficiently accurate elements to give the impression of complete accuracy. By implementing the results of this research, designers can develop smaller replicas to be perceived as more extensive.
series	ASCAAD
email
last changed	2024/02/16 13:24

_id	ascaad2016_035
id	ascaad2016_035
authors	Al-Matarneh, Rana; Ihsan Fethi
year	2016
title	Assessing the Impact of CAD Tools on Architectural Design Quality - A case study of graduation projects in Jordan
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 331-350
summary	The current concept of architectural design education in most schools of architecture in Jordan is a blend between manual pen drafting and digital approaches. However, the disconnection between these two methods has resulted in the students' failure to transfer skills learnt through traditional methods to the digital method of CAD. The objective of this study is twofold: to first compare students’ attitudes toward using both methods and to then assess the impact of CAD use on the quality of architectural design. An open-ended questionnaire was designed to measure variables related to students’ preferences toward CAD and traditional methods. The quality of sixty graduation projects at three Jordanian universities was investigated. The results appear to support the assumption that CAD tools are used largely as visual means and thereby cause a marked decline in design quality. These findings call for a reconsideration of the status quo and a rethinking of perhaps the entire architectural educational model.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ascaad2016_043
id	ascaad2016_043
authors	Alacam, Sema; Orkan. Z. Güzelci
year	2016
title	Computational Interpretations of 2D Muqarnas Projections in 3D Form Finding
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 421-430
summary	In the scope of this study, we developed an algorithm to generate new 3D geometry (interpretation) of a given or generated planar projection of a muqarnas in a digital 3D modelling software (Rhinoceros), its visual scripting environment (VSE) Grasshopper and also the Python programming language. Differing from traditional methods, asymmetrical form alternatives are examined. In other words, 2D projections of muqarnas were only used as an initial geometrical pattern for generative form finding explorations. This study can be considered an attempt to explore new relations, rules and vocabulary through algorithmic form finding experiments derived from 2D muqarnas projections.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ascaad2016_032
id	ascaad2016_032
authors	Alhadidi, Suleiman; Justin Mclean, Luchlan Sharah, Isabel Chia, Roger Sam
year	2016
title	Multiflight - Creating Interactive Stairs through Positive Technology
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 295-308
summary	This paper details a pedagogical project which calls for an improved design performance of the existing built environment through the use of smart technology and data-driven design. The project is an investigation into ways in which to improve the performance of a ‘pre-selected university building’ through the use of a media facade that allows for interactive experiences. Existing problems of the selected building have been identified through observation and research using a rich picture and agile approach. An underutilised staircase was selected as the focus site for a series of computational design and interactive design studies. The brief of this mini-research project aims to encourage more people to use the stairs and create a memorable experience with a technological approach through the application of a site specific interactive media installation. The project is an interactive staircase which utilises LED strips and generative sound. The project features a series of light boxes which are connected to the existing staircase balustrade. Arduino, passive infra-red sensors, and other motion detection sensors were used to allow for light and generative sound interaction with users using visual scripting tools and a generative design platform. Sensing technology was used as a real-time data-gathering device during the site analysis phase as well as an input device for the designed prototype to allow the testing of the data-driven design. This paper details the study and resultant interactive prototypes. It also discusses the exploration of performance based design ideas into design workflows and the integration of sensing tools into the design process. It concludes by identifying possible implications on using the Internet of Things concepts to facilitate the design of interactive architecture.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	caadria2016_259
id	caadria2016_259
authors	Chen, Jia-Yih and Shao-Chu Huang
year	2016
title	Adaptive Building Facade Optimisation: An integrated Green-BIM approach
doi	https://doi.org/10.52842/conf.caadria.2016.259
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 259-268
summary	This study focused on the optimal design of adaptive build- ing fac?ade for achieving better energy performance. Iterative fac?ade components design are studied between virtual and physical models with integrated tools of BIM, parametric design and sensor devices. The main objectives of this study are: (1) exploring systematic design process via the analysis of adaptive components in responsive fac?ade design; (2) developing compliance checking system for green building regulations; (3) developing optimization system for adaptive fac?ade design process. This paper demonstrated the integration of various digital design methods and concluded with the energy modelling re- sults of a demo project unit for various fac?ade component designs.
keywords	Building fac?ade design; energy performance; design optimization; parametric design; BIM
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	caadria2017_155
id	caadria2017_155
authors	Cichocka, Judyta Maria, Browne, Will Neil and Rodriguez, Edgar
year	2017
title	Optimization in the Architectural Practice - An International Survey
doi	https://doi.org/10.52842/conf.caadria.2017.387
source	P. Janssen, P. Loh, A. Raonic, M. A. Schnabel (eds.), Protocols, Flows, and Glitches - Proceedings of the 22nd CAADRIA Conference, Xi'an Jiaotong-Liverpool University, Suzhou, China, 5-8 April 2017, pp. 387-396
summary	For several years great effort has been devoted to the study of Architectural Design Optimization (ADO). However, although in the recent years ADO has attracted much attention from academia, optimization methods and tools have had a limited influence on the architectural profession. The aim of the study is to reveal users' expectations from the optimization tools and define limitations preventing wide-spread adaptation of the optimization solvers in the architectural practice. The paper presents the results of the survey "Optimization in the architectural practice" conducted between December 2015 and February 2016 on 165 architectural trainees and practising architects from 34 countries. The results show that there is a need for an interactive multi-objective optimization tool, as 78% respondents declared that a multi-objective optimization is more necessary in their practice than a single objective one and 91% of them acknowledged the need for choice of promising solutions during optimization process. Finally, it has been found that daylight, structure and geometry are three top factors which architects are interested in optimizing.
keywords	Architectural Design Optimization; Optimizaiton Techniques; Generic Solvers; Multi-criteria Decision Making
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2016_415
id	caadria2016_415
authors	Crolla, Kristof and Adam Fingrut
year	2016
title	Protocol of Error: The design and construction of a bending-active gridshell from natural bamboo
doi	https://doi.org/10.52842/conf.caadria.2016.415
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 415-424
summary	This paper advocates alternative methods to overcome the impossibility of realising ‘perfect’ digital designs. It discusses Hong Kong’s 2015 ‘ZCB Bamboo Pavilion’ as a methodological case study for the design and construction of architecture from unprocessed natu- ral bamboo. The paper critically evaluates protocols set up to deal with errors resulting from precise digital design systems merging with inconsistent natural resources and onsite craftsmanship. The paper starts with the geometric and tectonic description of the project, illus- trating a complex and restrictive construction context. Bamboo’s unique growth pattern, structural build-up and suitability as a bending- active material are discussed and Cantonese bamboo scaffolding craftsmanship is addressed as a starting point for the project. The pa- per covers protocols, construction drawings and assembly methods developed to allow for the incorporation and of large building toler- ances and dimensional variation of bamboo. The final as-built 3d scanned structure is compared with the original digital model. The pa- per concludes by discussing the necessity of computational architec- tural design to proactively operate within a field of real-world inde- terminacy, to focus on the development of protocols that deal with imperfections, and to redirect design from the virtual world towards the latent opportunities of the physical.
keywords	Bamboo; bending-active gridshells; physics simulation; form-finding; indeterminacy
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2023_138
id	ecaade2023_138
authors	Crolla, Kristof and Wong, Nichol
year	2023
title	Catenary Wooden Roof Structures: Precedent knowledge for future algorithmic design and construction optimisation
doi	https://doi.org/10.52842/conf.ecaade.2023.1.611
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 611–620
summary	The timber industry is expanding, including construction wood product applications such as glue-laminated wood products (R. Sikkema et al., 2023). To boost further utilisation of engineered wood products in architecture, further development and optimisation of related tectonic systems is required. Integration of digital design technologies in this endeavour presents opportunities for a more performative and spatially diverse architecture production, even in construction contexts typified by limited means and/or resources. This paper reports on historic precedent case study research that informs an ongoing larger study focussing on novel algorithmic methods for the design and production of lightweight, large-span, catenary glulam roof structures. Given their structural operation in full tension, catenary-based roof structures substantially reduce material needs when compared with those relying on straight beams (Wong and Crolla, 2019). Yet, the manufacture of their non-standard geometries typically requires costly bespoke hardware setups, having resulted in recent projects trending away from the more spatially engaging geometric experiments of the second half of the 20th century. The study hypothesis that the evolutionary design optimisation of this tectonic system has the potential to re-open and expand its practically available design solution space. This paper covers the review of a range of built projects employing catenary glulam roof system, starting from seminal historic precedents like the Festival Hall for the Swiss National Exhibition EXPO 1964 (A. Lozeron, Swiss, 1964) and the Wilkhahn Pavilions (Frei Otto, Germany, 1987), to contemporary examples, including the Grandview Heights Aquatic Centre (HCMA Architecture + Design, Canada, 2016). It analysis their structural concept, geometric and spatial complexity, fabrication and assembly protocols, applied construction detailing solutions, and more, with as aim to identify methods, tools, techniques, and construction details that can be taken forward in future research aimed at minimising construction complexity. Findings from this precedent study form the basis for the evolutionary-algorithmic design and construction method development that is part of the larger study. By expanding the tectonic system’s practically applicable architecture design solution space and facilitating architects’ access to a low-tech producible, spatially versatile, lightweight, eco-friendly, wooden roof structure typology, this study contributes to environmentally sustainable building.
keywords	Precedent Studies, Light-weight architecture, Timber shell, Catenary, Algorithmic Optimisation, Glue-laminated timber
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2016_243
id	ecaade2016_243
authors	Gül, Leman Figen and Hal?c?, Süheyla Müge
year	2016
title	Collaborative Design with Mobile Augmented Reality
doi	https://doi.org/10.52842/conf.ecaade.2016.1.493
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 493-500
wos	WOS:000402063700054
summary	In early design process, designers employ several media for externalizations of their design ideas which facilitate decision making, discussion and evaluation. Especially models are the most common representation tools and are used generally to understand and make spatial reasoning on the design ideas. Besides the traditional methods, today, the technological developments bring new ways for collaboration and design in 3D; the mobile augmented reality (MAR) technology is one of them. MAR is augmented reality technology which is provided by mobile devices. This study focuses on the early design process of collaborative designers' communication when they are working with the MAR technology. We developed a MAR environment for designers, and conducted an experiment to understand the key elements of the interaction of the designers with the interface. The communication and interaction of the designers are analyzed using the protocol analysis method. The results show that the MAR technology supports the co-design activities encouraging the designers to manipulate the created artefact. The results of the study would be indicative for future studies.
keywords	collaborative design; mobile augmented reality; protocol analysis
series	eCAADe
email
last changed	2022/06/07 07:50

_id	cf2017_111
id	cf2017_111
authors	Kepczynska-Walczak, Anetta; Pietrzak, Anna
year	2017
title	An Experimental Methodology for Urban Morphology Analysis
source	Gülen Çagdas, Mine Özkar, Leman F. Gül and Ethem Gürer (Eds.) Future Trajectories of Computation in Design [17th International Conference, CAAD Futures 2017, Proceedings / ISBN 978-975-561-482-3] Istanbul, Turkey, July 12-14, 2017, p. 111.
summary	The paper presents results of a research conducted in 2015 and 2016 at Lodz University of Technology. It proposes a purpose and context fit approach towards the automation of urban data generation based on GIS tools and New Urbanism typologies. First, background studies of methods applied in urban morphology analysis are revealed. Form-Based Code planning, and subsequently Transect-Based Code are taken into account. Then, selected examples from literature are described and discussed. Finally, the research study is presented and the outcomes compared with more traditional methodology.
keywords	GIS, Urban morphology, Spatial analysis, Decision support systems, Urban design, Data analytics, Modelling and simulation
series	CAAD Futures
email
last changed	2017/12/01 14:37

_id	caadria2016_363
id	caadria2016_363
authors	Lee, Alexander; Suleiman Alhadidi and M. Hank Haeusler
year	2016
title	Developing a Workflow for Daylight Simulation
doi	https://doi.org/10.52842/conf.caadria.2016.363
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 363-372
summary	Daylight simulations are occasionally used as active tools in regards to local governing regulations, which are necessary for providing documentation. Simulation tools have been avoided in the past due to their barriers. Daylight simulation tools are used within documentation design stages as ‘passive tools’, however they do not have a direct impact on the architecture design decisions, as passive tools are used by engineers usually to derive material and glass speci- fications. Recent developments within an online community have pro- vided designers with access to daylight simulation tools within a de- sign platform accessible data can be modified and represented with local governing codes to provide designers with relevant information. The paper aimed to develop an active daylight simulation tool within a design platform. Data is filtered with the Green Star benchmarks to export visual information as well as a voxel matrix instead of 2D lu- minance maps. This paper outlines a workflow of the simulation tool used to evaluate daylight performance of a selected building as a case study in real time. The paper also details potential problems and justi- fied suggestions derived from the analysis for the building to reach the requirements within the Green Star Multi Unit Residential.
keywords	Data-driven design; computation environmental design; daylight simulation; Green Star
series	CAADRIA
email
last changed	2022/06/07 07:52

_id	ascaad2016_028
id	ascaad2016_028
authors	Modesitt, Adam
year	2016
title	Adaptive Collaboration in Project Delivery
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 259-268
summary	Digital workflows in architectural design have upended traditional models of collaboration. As digitally networked tools further permeate the project delivery process, information and knowledge are increasingly distributed seamlessly across decentralized networks. While the seamless flow of information across digital networks can serve to augment traditional hierarchies of production, it can also change fundamentally the process by which architecture is produced, enabling modes of collaboration in which creation and production occur as decentralizing acts. This paper examines current models, methods and theories of decentralized collaboration in digitally networked architectural production, towards the goal of establishing a framework for understanding the meta-controls and standards that structure it. Particular emphasis is given to the emerging process of crowdsourcing, in which design intelligence emerges collectively from a decentralized network of actors and agents. This study serves as the foundation for a proposed model of ‘adaptive collaboration,’ in which an adaptive set of meta-controls and standards change in response to the evolving roles and scopes among individual actors and agents. An experiment in Adaptive Collaboration is described, taking place in a Solar Decathlon project at the New Jersey Institute of Technology.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	ecaade2016_152
id	ecaade2016_152
authors	Mohamed, Basem Eid, Gemme, Frederic and Sprecher, Aaron
year	2016
title	Information and Construction: Advanced Applications of Digital Prototyping in the Housing Industry
doi	https://doi.org/10.52842/conf.ecaade.2016.2.591
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 591-600
wos	WOS:000402064400060
summary	This study elaborates on recent efforts in applying Digital Prototyping strategies to realize a prefabricated construction system that allows for significant flexibility and adaptability in housing design. The rational of the described model is based on combining advanced BIM modeling with structural analysis, towards achieving high accuracy in the design phase, leading to subsequent precision in fabrication and assembly of a specific building system; the BONE Structure. Such an application aims at delivering significant levels of detailing in design and production of the system's components, thus supporting the intention of pre-defined assembly on jobsites, leveraging quality, and reducing waste. The paper represents a phase from a continuous research endeavor that aims at exploring technological enablers for mass customization in the housing realm, based on advanced levels of digitization of the design and production processes.
keywords	Housing; Prefabrication; Digital Prototyping
series	eCAADe
email
last changed	2022/06/07 07:58

_id	ecaade2016_042
id	ecaade2016_042
authors	Narangerel, Amartuvshin, Lee, Ji-Hyun and Stouffs, Rudi
year	2016
title	Daylighting Based Parametric Design Exploration of 3D Facade Patterns
doi	https://doi.org/10.52842/conf.ecaade.2016.2.379
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 379-388
wos	WOS:000402064400037
summary	A building façade plays an important role of reducing artificial lighting by introducing natural light into the interior space. A majority of research and current technology heavily focuses on the optimization of window properties such as the size, location, and glazing with the consideration of external shading device as well as the building wall in order to obtain appropriate natural lit space. In the present work, we propose a 3-dimensional approach that can explore the trade-offs between two objectives, daylight performance and electricity generation, by means of paramedic modeling and multi-objective optimization algorithm. The case study was simulated under the environmental setting of the geographical location of Incheon, Korea without any urban context. Using the proposed methods, 50 pareto-front optimal solutions were derived and investigated based on the achieved daylighting and generated electricity.
keywords	Parametric design; façade design; daylight performance; building-integrated photovoltaics; multi-objective optimization
series	eCAADe
email
last changed	2022/06/07 07:58

_id	acadia16_140
id	acadia16_140
authors	Nejur, Andrei; Steinfeld, Kyle
year	2016
title	Ivy: Bringing a Weighted-Mesh Representations to Bear on Generative Architectural Design Applications
doi	https://doi.org/10.52842/conf.acadia.2016.140
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 140-151
summary	Mesh segmentation has become an important and well-researched topic in computational geometry in recent years (Agathos et al. 2008). As a result, a number of new approaches have been developed that have led to innovations in a diverse set of problems in computer graphics (CG) (Sharmir 2008). Specifically, a range of effective methods for the division of a mesh have recently been proposed, including by K-means (Shlafman et al. 2002), graph cuts (Golovinskiy and Funkhouser 2008; Katz and Tal 2003), hierarchical clustering (Garland et al. 2001; Gelfand and Guibas 2004; Golovinskiy and Funkhouser 2008), primitive fitting (Athene et al. 2004), random walks (Lai et al.), core extraction (Katz et al.) tubular multi-scale analysis (Mortara et al. 2004), spectral clustering (Liu and Zhang 2004), and critical point analysis (Lin et al. 20070, all of which depend upon a weighted graph representation, typically the dual of a given mesh (Sharmir 2008). While these approaches have been proven effective within the narrowly defined domains of application for which they have been developed (Chen 2009), they have not been brought to bear on wider classes of problems in fields outside of CG, specifically on problems relevant to generative architectural design. Given the widespread use of meshes and the utility of segmentation in GAD, by surveying the relevant and recently matured approaches to mesh segmentation in CG that share a common representation of the mesh dual, this paper identifies and takes steps to address a heretofore unrealized transfer of technology that would resolve a missed opportunity for both subject areas. Meshes are often employed by architectural designers for purposes that are distinct from and present a unique set of requirements in relation to similar applications that have enjoyed more focused study in computer science. This paper presents a survey of similar applications, including thin-sheet fabrication (Mitani and Suzuki 2004), rendering optimization (Garland et al. 2001), 3D mesh compression (Taubin et al. 1998), morphin (Shapira et al. 2008) and mesh simplification (Kalvin and Taylor 1996), and distinguish the requirements of these applications from those presented by GAD, including non-refinement in advance of the constraining of mesh geometry to planar-quad faces, and the ability to address a diversity of mesh features that may or may not be preserved. Following this survey of existing approaches and unmet needs, the authors assert that if a generalized framework for working with graph representations of meshes is developed, allowing for the interactive adjustment of edge weights, then the recent developments in mesh segmentation may be better brought to bear on GAD problems. This paper presents work toward the development of just such a framework, implemented as a plug-in for the visual programming environment Grasshopper.
keywords	tool-building, design simulation, fabrication, computation, megalith
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	ecaade2016_154
id	ecaade2016_154
authors	Ozer, Derya Gulec and Nagakura, Takehiko
year	2016
title	Simplifying Architectural Heritage Visualization - AUGMENTEDparion
doi	https://doi.org/10.52842/conf.ecaade.2016.2.521
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 521-528
wos	WOS:000402064400052
summary	Among other historical artifacts, architectural heritage is the most difficult to present in museums. There is a need for a high-tech visualization of cultural heritage since it is important to visualize, share and analyze data for stakeholders such as historians, archaeologists, architects and tourists. This study aims to represent architectural heritage in terms of photogrammetry and AR methods for the Parion Theater, Biga, Turkey, dates back to 1st-2nd century A.D. and has been under excavation since 2005. The study uses MULTIRAMA, a method previously developed by ARC Team (MIT) in 2013, which aims to represent the "unseen" to such users by visualising and documenting via an app. The method supports architectural heritage representation via the processes of, i) documentation, ii) data process and modeling, and iii) presentation. This holistic and low cost approach will focus on the problem of visualizing the digital architectural heritage, and led light to future projects of a historical visualization database throughout Turkey.
keywords	Augmented Reality (AR); Cultural Heritage; Photogrammetry; Parion
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ecaade2016_129
id	ecaade2016_129
authors	Pak, Burak and Aydemir, Zeynep
year	2016
title	Understanding the Verbal Concepts Appropriated by the Students in the Architectural Design Studio
doi	https://doi.org/10.52842/conf.ecaade.2016.1.387
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 387-394
wos	WOS:000402063700043
summary	The main aim of this study is to gain a better understanding of the role of verbal concepts in the architectural design processes of the students in a studio context. To serve this purpose, we carried out a 15-week studio in an urban architectural masters design studio at KU Leuven Faculty of Architecture. We observed the use of verbal concepts in time during this studio and analyzed the design processes of the students based on their self-report logs on the studio web platform. Based on these, we conducted a statistic analysis and a network mapping study. We found that early concepts provide a starting point for developing fully-fledged specialized design ideas. Furthermore, a higher number of links between concepts indicated their importance during the process. In addition, the data collection and research methods proved to be reliable for mapping the design process of the students as well as revealing the evolution of the ideas in the studio.
keywords	Design Studio; Concepts; Crowdsourcing; Web Platform; Self-reporting; Design Research
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ascaad2016_004
id	ascaad2016_004
authors	Peteinarelis, Alexandros; Socrates Yiannoudes
year	2016
title	Algorithmic Thinking in Design and Construction - Working with parametric models
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 19-28
summary	This paper examines the parametric model in algorithmic design processes, using the outcome of an educational digital design and fabrication course as a case study. In its long history, algorithmic design as a form-finding method, allowed designers to manage complex non-standard associative geometries, suggesting a shift from the digital representation of form, to its systematic representation into a parametric model through code. Rather than a style or a tool, the parametric model is best defined in mathematical terms; in practice it incorporates the organizational logic of the form and the topological associations of its parts, so that a change in its constitutive parameters will invoke a concerted update of the entire model, and, iteratively, formal and structural variations. In a series of design experiments that took place at the School of Architecture of the Technical University of Crete in the spring of 2015, we used parametric models represented into visual code, from the initial conceptual stage to fabrication. From the experience and outcome of this course, we deduced that, compared to other digital formation methods, parametric models allow the designer to constantly interact with the model through the code, producing discreet variations without losing control of the design intentions, by “searching” into a wide range (albeit finite) of virtual results. This suggested a shift in culturally embedded patterns of modernist design thinking.
series	ASCAAD
email
last changed	2017/05/25 13:13

For more results click below: