Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 621

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2016_441
id	sigradi2016_441
authors	Flor?ncio, Eduardo Quintella; Ferreira Segundo, Dilson Batista; Quintella, Ivvy Pedrosa Cavalcante Pessôa
year	2016
title	O futuro do processo construtivo? A impress?o 3d em concreto e seu impacto na concepç?o e produç?o da arquitetura [The future of constructive process? The 3d concrete printing and its impact on architectural conception and production]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.305-309
summary	This article aims to discuss the 3D concrete printing technology for use in construction, which promises to generate economic gains and benefits for the environment. It also search for a potential impact of this technology over the current architecture design and construction methods, assessing its viability opposite the context of the research and practical construction in Brazil. From the partial results of the analysis, listed out to potential and difficulties related to the implementation of this technology.
keywords	3D concrete printing; automated construction; digital fabrication
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ascaad2016_014
id	ascaad2016_014
authors	Ahmed, Zeeshan Y.; Freek P. Bos, Rob J.M. Wolfs and Theo A.M. Salet
year	2016
title	Design Considerations Due to Scale Effects in 3D Concrete Printing
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 115-124
summary	The effect of scale on different parameters of the 3D printing of concrete is explored through the design and fabrication of a 3D concrete printed pavilion. This study shows a significant gap exists between what can be generated through computer aided design (CAD) and subsequent computer aided manufacturing (generally based on CNC technology). In reality, the 3D concrete printing on the one hand poses manufacturing constraints (e.g. minimum curvature radii) due to material behaviour that is not included in current CAD/CAM software. On the other hand, the process also takes advantage of material behaviour and thus allows the creation of shapes and geometries that, too, can’t be modelled and predicted by CAD/CAM software. Particularly in the 3D printing of concrete, there is not a 1:1 relation between toolpath and printed product, as is the case with CNC milling. Material deposition is dependent on system pressure, robot speed, nozzle section, layer stacking, curvature and more – all of which are scale dependent. This paper will discuss the design and manufacturing decisions based on the effects of scale on the structural design, printed and layered geometry, robot kinematics, material behaviour, assembly joints and logistical problems. Finally, by analysing a case study pavilion, it will be explore how 3D concrete printing structures can be extended and multiplied across scales and functional domains ranging from structural to architectural elements, so that we can understand how to address questions of scale in their design.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	ecaade2018_165
id	ecaade2018_165
authors	Fisher-Gewirtzman, Dafna and Bruchim, Elad
year	2018
title	Considering Variant Movement Velocities on the 3D Dynamic Visibility Analysis (DVA) - Simulating the perception of urban users: pedestrians, cyclists and car drivers.
doi	https://doi.org/10.52842/conf.ecaade.2018.2.569
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 2, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 569-576
summary	The objective of this research project is to simulate and evaluate the effect of movement velocity and cognitive abilities on the visual perception of three groups of urban users: pedestrians, cyclists and car drivers.The simulation and analysis is based on the 3D Dynamic Visual Analysis (DVA) (Fisher-Gewirtzman, 2017). This visibility analysis model was developed in the Rhinoceros and Grasshopper software environments and is based on the conceptual model presented in Fisher-Gewirtzman (2016): a 3D Line of Sight (LOS) visibility analysis, taking into account the integrated effect of the 3D geometry of the environment and the variant elements of the view (such as the sky, trees and vegetation, buildings and building types, roads, water etc.). In this paper, the current advancement of the existing model considers the visual perception of human users employing three types of movement in the urban environment--pedestrians, cyclists and drivers--is explored.We expect this research project to exemplify the contribution of such a quantification and evaluation model to evaluating existing urban structures, and for supporting future human perception-based urban design processes.
keywords	visibility analysis and simulation; predicting perception of space; movement in the urban environment; pedestrians; cyclists; car drivers
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2016_730
id	sigradi2016_730
authors	Silva, Adriane Borda Almeida da; Silveira, Diego Sacco; Medina, Alex; Vecchia, Luisa Félix Dalla
year	2016
title	Pontos (de vista) sobre o patrimônio: entre o escaneamento e a fotogrametria [Points (of view) about architectural heritage: between scanning and photogrammetry]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.651-656
summary	This paper shows the result of a partnership between architects, cartographer and civil engineers, masters and undergraduate students, researchers focused on digital representation technologies applied to architecture, to perform three-dimensional scanning of entire buildings, internally and externally. The study is directed to exploring different types of representation which can be obtained from a point cloud to attribute accessibility to information regarding architectural heritage: the cloud itself, as an accurate record of the current state, form and appearance of the scanned objects; direct visualization in virtual tours; the acquisition of architectural documentation; the representation of appropriate models for 3D printing.
keywords	Representation; architectural heritage; point cloud; scanning; photogrammetry
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	ecaade2016_085
id	ecaade2016_085
authors	Okuda, Shinya and Zhenyi, Lin
year	2016
title	Groove Light - Adding Physical Reality to Virtual Projections Using 3D-printed Lanterns
doi	https://doi.org/10.52842/conf.ecaade.2016.1.113
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 113-120
summary	How might 21st-century computational technologies enhance lighting functionality in architecture? The Groove Light provokes relationships between light and shadow, adding a new dimension to future lighting. A series of distinctive and complex 3D-printed lanterns, which cast identical patterns of geometric shadows, creates the optical illusion that they are floating above a continuous, geometric carpet of shadows. The authors tested this concept in three steps: 1. 3D printability, 2. a lighting test and 3. interactivity. The paper also reports the effectiveness of a selective and custom support strategy for printing overhanging geometries with fused deposition modelling (FDM) 3D printers and further highlights differences between the computational models and physical prototypes in the quest for 'point' light sources.
wos	WOS:000402063700013
keywords	Digital Physicality; 3D Printing; Self-supporting Geometry; Stereographic Projection; Projection Mapping
series	eCAADe
email
last changed	2022/06/07 08:00

_id	caadria2016_703
id	caadria2016_703
authors	Ding, Yakui; Tomohiro Fukuda, Nobuyoshi Yabuki, Takashi Michikawa and Ali Motamedi
year	2016
title	Automatic Measurement System of Visible Greenery Ratio Using Augmented Reality
doi	https://doi.org/10.52842/conf.caadria.2016.703
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 703-712
summary	Greening has been promoted to improve the living condi- tions in urban environments. Quantification of greenery is an im- portant issue to identify the criteria for stakeholders in the process of greening. This research focuses on the quantification of visible green- ery ratio which is defined as the amount of greenery in the field of vi- sion. Some measurement methods of visible greenery ratio have been already proposed. However, the quantification process is usually time consuming and prone to human errors due to manual operations by us- ing an image processing software. Therefore, in this research, the au- thors developed an automated measurement system based on image processing technology for the efficient visible greenery ratio meas- urement. In the verification experiment, the proposed method achieved similar results for extracted pixels of green areas as the tradi- tional manual method, with decreased calculation time. Furthermore, in addition to measuring the current ratio of greenery, this system can visualize possible future changes in visible greenery by adding plant- ing (landscape) design models in an Augmented Reality (AR) envi- ronment. Using the proposed method, an ideal greening environment can be designed and evaluated by end-users, more intuitively. The de- veloped design system is expected to eventually result in increasing the amount of greenery in the urban environment.
keywords	Visible greenery ratio; image processing; automatic measurement tool; augmented reality
series	CAADRIA
email
last changed	2022/06/07 07:55

_id	ascaad2016_019
id	ascaad2016_019
authors	Ibrahim, Magdy M.
year	2016
title	3D Printed Architecture - A new practical frontier in construction methods
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 169-178
summary	It is important to discuss and compare the rationale behind the success of the additive manufacturing technology in particular industries and at a particular scale versus full-scale building construction. The comparison should include structural qualities of the possible used materials, the cost effectiveness of the process, the time factor and its value in the construction process, the mass customization potential of the technology and its effect on building forms. The current state of technology in architecture, despite huge potential, has not produced new architectural forms.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	ecaade2018_p02
id	ecaade2018_p02
authors	Kepczynska-Walczak, Anetta and Martens, Bob
year	2018
title	Digital Heritage - Special Panel Session
doi	https://doi.org/10.52842/conf.ecaade.2018.1.039
source	Kepczynska-Walczak, A, Bialkowski, S (eds.), Computing for a better tomorrow - Proceedings of the 36th eCAADe Conference - Volume 1, Lodz University of Technology, Lodz, Poland, 19-21 September 2018, pp. 39-44
summary	According to eCAADe's mission, the exchange and collaboration within the area of computer aided architectural design education and research, while respecting the pedagogical approaches in the different schools and countries, can be regarded as a core activity. The current session follows up on the first Contextualised Digital Heritage Workshop (CDHW) held on the occasion of eCAADe 2016 in Oulu (D. di Mascio et.al.) This event was thought to represent the first of a series of future contextualized digital heritage workshops and hence, the name Oulu interchangeable with the name of any other city or place. The second CDHW took place in the framework of CAADRIA 2017 in Suzhou (D. di Mascio & M.A. Schnabel) and focussed on sharing and dissemination of heritage information and personal experiences, such as narratives.The primary objective for the 2018 digital heritage session is to engage participants in an active discussion, not the longer format presentation of prepared positions. The round table itself is limited to short opening statements so as to ensure time is allowed for viewpoints to be exchanged and for the conference attendees to join in on the issues discussed. The panel will review past practices with the potential for guiding future direction.
keywords	Digital technology; Built heritage; Virtual archeology
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2016_ws-afuture
id	ecaade2016_ws-afuture
authors	Kim, Jaehwan, Schwartz, Mathew and Zarzycki, Andrzej
year	2016
title	The Wave of Autonomous Mobility:Architecture Facilitating Indoor Autonomous Navigation
doi	https://doi.org/10.52842/conf.ecaade.2016.1.053
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 53-58
summary	When considering architectural and urban responses to autonomous mobility, it becomes evident that the future strategies will have to include a significant transformation to the built environment, particularly the ways it operates and interacts with inhabitants. Designers will not only need to rethink formal and functional arrangements but also, and perhaps primarily, consider the environment--buildings and cities--as active and equal actors with adaptive and autonomous behaviors similarly to those people or self-driving cars manifest. This paper discusses initial planning and design strategies for the integration of autonomous vehicles and other forms of autonomous mobility into the built environment. Specifically, it looks into necessary steps required to develop infrastructure to a level of autonomy that can facilitate a next generation of wayfinding and mobility. A growing research area into smaller personal mobility vehicles that would revolutionize elderly and disabled mobility brings to the light the major technical challenges present in current building infrastructure.
wos	WOS:000402063700004
keywords	Autonomous Vehicle; Navigation; Localization; Smart Buildings; Smart Infrastructure
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ijac201614103
id	ijac201614103
authors	Savov, Anton; Oliver Tessmann and Stig Anton Nielsen
year	2016
title	Sensitive Assembly: Gamifying the design and assembly of fac?ade wall prototypes
source	International Journal of Architectural Computing vol. 14 - no. 1, 30-48
summary	The article describes a method for gamifying the design and assembly of computationally integrated structures built out of discrete identical blocks. As a case study, the interactive installation Sensitive Assembly was designed and built at the Digital Design Unit (Prof. Dr Oliver Tessmann) at the Technische Universita?t of Darmstadt and exhibited during the digital art festival NODE 2015 in Frankfurt in 2015. Sensitive Assembly invites people to play a Jenga-like game: starting from a solid wall, players are asked to remove and replace the installation’s building blocks to create windows to a nurturing light while challenging its stability. A computational system that senses the current state of the wall guides the physical interaction and predicts an approaching collapse or a new light beam breaking through. The installation extends the notion of real-time feedback from the digital into the physical and uses machine-learning techniques to predict future structural behaviour.
keywords	Gamification, prediction, feedback, interaction, assembly
series	journal
last changed	2016/06/13 08:34

_id	ecaade2024_361
id	ecaade2024_361
authors	Sochùrková, Petra; Devyatkina, Svetlana; Kordová, Sára; Vaško, Imrich; Tsikoliya, Shota
year	2024
title	Bioreceptive Parameters for Additive Manufacturing of Clay based Composites
doi	https://doi.org/10.52842/conf.ecaade.2024.1.045
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 1, pp. 45–54
summary	Due to climate change and the problematic amount of waste and CO2 emissions in the construction industry, non-human organisms and sustainable solutions are key motivators of the study. This paper focuses on developing a bioreceptive (Guillitte, 1995) composite suitable for additive manufacturing, composed to support growth of various organisms. It investigates key properties which have shown to be beneficial for promoting biological growth, such as water absorption, water permeability, humidity, and surface texture. The study evaluates the effect of two groups of clay-based waste additives, wooden sawdust (Arslan, et al., 2021) and sediment material sourced from local tunnel excavation in Prague. Simultaneously the need for intelligent reintegration and waste use is prevalent. Additive fabrication offers the ability to test a variety of composites and (re-)integrate them into the manufacturing processes. Current approach explores how to design artificial environments/skins for greenery and small life with the potential to improve both diversity and survivability while maintaining a better climate in its immediate surroundings. Bioreceptive design has the potential to improve the quality of the urban environment and bring new aesthetic influences into it (Cruz and Beckett 2016, p. 51-64).
keywords	Digital Design, Material Research, Bioreceptive Design, Robotic Fabrication, Additive Manufacturing, Experimental Pastes, Bio compatibility, Waste Materials, Clay Composites
series	eCAADe
email
last changed	2024/11/17 22:05

_id	caadria2016_735
id	caadria2016_735
authors	Sousa, Jose Pedro; Pedro Martins and Pedro De Azambuja Varela
year	2016
title	The CorkCrete Arch Project: The digital design and robotic fabrication of a novel building system made out of cork and glass-fibre reinforced concrete
doi	https://doi.org/10.52842/conf.caadria.2016.735
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 735-744
summary	The CorkCrete arch is a 1:1 scale construction aiming at testing the use of robotic fabrication technologies in the production of a novel building system made out of two different materials – cork and concrete (GRC). The combination of these materials is promising since it merges the sustainable and performative properties of first with the structural efficiency of the second one. The result is a materi- al system suited for customized prefabrication and easy on-site instal- lation. The current paper describes the design and fabrication process of the arch, which employed a single parametric design environment to bridge design and fabrication, and an innovative sequence of differ- ent robotic processes. The success of this experience invites the team to continue this research into the future construction of larger scale applications.
keywords	Cork; concrete; computational design; digital fabrication; robotics
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	ecaade2016_147
id	ecaade2016_147
authors	Tamke, Martin, Zwierzycki, Mateusz, Evers, Henrik Leander, Ochmann, Sebastian, Vock, Richard and Wessel, Raoul
year	2016
title	Tracking Changes in Buildings over Time - Fully Automated Reconstruction and Difference Detection of 3d Scan and BIM files
doi	https://doi.org/10.52842/conf.ecaade.2016.2.643
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 643-651
summary	Architectural and Engineering Communities are interested in the detection of differences between different representations of the same building. These can be the differences between the design and the as-built-state of a building, or the detection of changes that occur over time and that are documented by consecutive 3D scans. Current approaches for the detection of differences between 3D scans and 3D building models are however laborious and work only on the level of a building element. We demonstrate a novel highly automated workflow to detect differences between representations of the same building. We discuss the underlying tools and methods and the ways to communicate deviations and differences in an appropriate manner and evaluate our approach with a rich set of real world datasets.
wos	WOS:000402064400065
keywords	3d scan; BIM; Machine learning; Point Clouds; Big Data
series	eCAADe
email
last changed	2022/06/07 07:56

_id	ijac201614405
id	ijac201614405
authors	Thompson, Emine Mine
year	2016
title	What makes a city ‘smart’?
source	International Journal of Architectural Computing vol. 14 - no. 4, 358-371
summary	Taking advantage of information and communications technology tools and techniques for city administration, whether it is for urban planning activities, for transport solutions or many other purposes, is not a new concept. However, in order for a city to be classified as ‘smart’, a synthesis of intelligence that transcends mere utilisation is essential. This article analyses the increasing use of information and communications technology and sensing technologies in cities by examining this new way of city governing from a critical perspective. Existing projects and initiatives were investigated to find out how, and to what extent, these tools are being employed by cities. The advantages and the current shortcomings of smart city are also discussed in order to understand the viability of using these tools.
keywords	Smart city, future cities, real-time data, citizen engagement, city dashboards
series	journal
email
last changed	2016/12/09 10:52

_id	ascaad2016_058
id	ascaad2016_058
authors	Assassi, Abdelhalim; Djemaa Benmechirah and Rachida Samai
year	2016
title	Visibility Map - Exploratory study of urban planning for future city design
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 579-588
summary	Through space we can read the acts and the daily activities of human being and, we can also understand different interactions within any social unit. This paper explain how specially the space type can interpret why the human being derives to a negative behavior like "Crime". So, in this study we adopt the visibility approach which is developed by the laboratory of space syntax (UCL), and which makes a sense for the link between the space design and its use and its positive or negative social consequences in the future. Then, the purpose of this paper is to present the importance of the use of visibility map which can also be an outlook approach for detecting potential hot-spots in urban planning designs specially of new cities, for avoiding the negative using of urban spaces like "Crime" in the future. The case of study is the new city of Ali Mendjeli (Constantine - Algeria), the capital of the East of Algeria known by a very fast demographic and urban growth. After analyzing a central urban neighborhood of this city using Depthmap, we found thirty-four hot-spots which can be appropriate spaces for the exercise of crime in the future, and we found that this point was downplayed in the urban planning designs before the realization of Ali Mendjeli new city.
series	ASCAAD
email
last changed	2017/05/25 13:34

_id	ecaade2016_073
id	ecaade2016_073
authors	Borhani, Alireza and Kalantar, Negar
year	2016
title	Material Active Geometry - Constituting Programmable Materials for Responsive Building Skins
doi	https://doi.org/10.52842/conf.ecaade.2016.1.639
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 639-648
summary	This paper is part of a body of research developing an exploratory dialogue between the built form and the environment, via experimentation with performative geometry and material. Here, geometry is considered a design material with the specific capacity to contribute to the performative aspects and kinetic capabilities of building skins.This work opens with a review of emerging opportunities for architects to design materials. It then discusses the concept of Material Active Geometry (MAG) as a means of designing new properties for existing materials. This is followed by a discussion of MAG principles that inform the concepts of flexibility and rigidity in a 3D-printed textile called Flexible Textile Structure (FTS). This research characterizes two FTS types and discusses their potential to be employed in building skins; it also considers combinatory approaches to computational models and physical prototyping. The work concludes with a discussion of the advantages of using FTS, and provides a trajectory for future research in the field of responsive materials and systems.
wos	WOS:000402063700069
keywords	Programmable Material; Material Active Geometry; Flexible Textile Structures; Responsive Building Skins; Flexible yet Rigid
series	eCAADe
email
last changed	2022/06/07 07:54

_id	acadia23_v1_166
id	acadia23_v1_166
authors	Chamorro Martin, Eduardo; Burry, Mark; Marengo, Mathilde
year	2023
title	High-performance Spatial Composite 3D Printing
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 166-171.
summary	This project explores the advantages of employing continuum material topology optimization in a 3D non-standard lattice structure through fiber additive manufacturing processes (Figure 1). Additive manufacturing (AM) has gained rapid adoption in architecture, engineering, and construction (AEC). However, existing optimization techniques often overlook the mechanical anisotropy of AM processes, resulting in suboptimal structural properties, with a focus on layer-by-layer or planar processes. Materials, processes, and techniques considering anisotropy behavior (Kwon et al. 2018) could enhance structural performance (Xie 2022). Research on 3D printing materials with high anisotropy is limited (Eichenhofer et al. 2017), but it holds potential benefits (Liu et al. 2018). Spatial lattices, such as space frames, maximize structural efficiency by enhancing flexural rigidity and load-bearing capacity using minimal material (Woods et al. 2016). From a structural design perspective, specific non-standard lattice geometries offer great potential for reducing material usage, leading to lightweight load-bearing structures (Shelton 2017). The flexibility and freedom of shape inherent to AM offers the possibility to create aggregated continuous truss-like elements with custom topologies.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	ecaade2016_079
id	ecaade2016_079
authors	Cheng, Chi-Li and Hou, June-Hao
year	2016
title	Biomimetic Robotic Construction Process - An approach for adapting mass irregular-shaped natural materials
doi	https://doi.org/10.52842/conf.ecaade.2016.1.133
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 133-142
summary	Beaver dams are formed by two main processes. One is that beavers select proper woods for constructing. The other one is that streams aggregate those woods to be assembled. Using this approach to construction structure is suitable for natural environment. In this paper, we attempt to develop a construction process which is suitable for all-terrain construction robot in the future. This construction process is inspired by beavers' construction behavior in nature. Beavers select proper sticks to make the structure stable. We predict that particular properties of sticks contribute gravity-driven assembly of wood structure. Thus, we implement the system with machine learning to find proper properties of sticks to improve selection mechanism of construction process. During this construction process, 3D scanner on robotic arm scans and recognizes sticks on terrain, and then robot will select proper sticks and place them. After placement, the system will scan and record the results for learning mechanism.
wos	WOS:000402063700015
keywords	Biomimetic Design; Machine Learning; Natural Material; Point Cloud Analysis; Robotic Fabrication
series	eCAADe
email
last changed	2022/06/07 07:55

_id	ecaade2016_164
id	ecaade2016_164
authors	Dobiesz, Sebastian and Grajper, Anna
year	2016
title	Animating the Static. Case Study of The Project "Urbanimals" - Enhancing play in the cities through an augmented and interactive environment
doi	https://doi.org/10.52842/conf.ecaade.2016.1.691
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 691-700
summary	This article delineates the process of developing the project "Urbanimals" - an interactive installation designed and realised in Bristol, UK, in 2015. As the case study research, it draws attention to the difficulties in designing interactive structures in urban spaces - from an architects' idea to a construction stage. There are four areas that are being investigated: (1) Modelling interactions, (2) Negotiating locations and logistics, (3) Developing hardware and (4) Performing the on-site observations. The project draws from the idea of Smart City (SC) as the concept of the urban environment with a certain level of responsiveness through implementing a technology-driven matter that expands city offer perceivable, but gentle and not hindering way. It highlights the possible applications of projection technology and the utilisation of the 3D modelling software which provides complex tools for creating animations, movements and interactions with future users. The article gives clues how to design more engaging interactions and how to deal with implementing them in public realm.
wos	WOS:000402063700074
keywords	Smart Cities; Interactive Architecture; public realm; art installations
series	eCAADe
email
last changed	2022/06/07 07:55

For more results click below: