Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 622

Reformat results as: short short into frame detailed detailed into frame

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	ecaade2016_102
id	ecaade2016_102
authors	Decker, Martina, Hahn, George and Harris, Libertad M.
year	2016
title	Bio-Enabled Façade Systems - Managing Complexity of Life through Emergent Technologies
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 603-612
doi	https://doi.org/10.52842/conf.ecaade.2016.1.603
wos	WOS:000402063700065
summary	The abundance of vertical surfaces in urban environments and their use for green installations have been of great interest in the architectural community. This paper discusses how vertical gardens and urban farming can be spurred on and enabled by two emerging fields of investigation: Material Science and the Internet of Things (IoT). This paper discusses how two emerging strategies, smart materials and novel sensing and actuation systems linked to the IoT, can facilitate the creation of a stable environment or zone along architectural facades for the creation of new ecosystems. Furthermore, this paper will contemplate future trajectories for the integration of living matter into buildings and propose an open source database that will facilitate the exchange of collected data and knowledge to spur on further developments.
keywords	Microalgae; Nanotechnology; Internet of Things; Bio-Enabled Design; Microcontrollers, Sensors
series	eCAADe
email
last changed	2022/06/07 07:55

_id	sigradi2016_555
id	sigradi2016_555
authors	Fernández Colombo, Mónica Inés; Bonvecchi, Liliana Telma; Granero, Adriana Edith; Brignone, Mabel Clara
year	2016
title	Aprendizaje Basado en Problemas + Innovación Tecnológica [Problem-based learning + Technological Innovation]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.938-943
summary	Collaboration between government agencies and academia seeks to facilitate a comprehensive approach by city representatives and stakeholders. Internet and social media connectivity may be applied as a self-organization tool. The response of architecture to the public space needs to consider hybrid spaces that combine digital and physical, representations, allowing urban experiences that are enhanced by virtual data imprinted on existing physical information. The study of these aspects may be the purpose of future city projects or become a form of communication of government proposals to the neighbors, beyond the scope of the discipline.
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	caadria2019_626
id	caadria2019_626
authors	Hahm, Soomeen, Maciel, Abel, Sumitiomo, Eri and Lopez Rodriguez, Alvaro
year	2019
title	FlowMorph - Exploring the human-material interaction in digitally augmented craftsmanship
source	M. Haeusler, M. A. Schnabel, T. Fukuda (eds.), Intelligent & Informed - Proceedings of the 24th CAADRIA Conference - Volume 1, Victoria University of Wellington, Wellington, New Zealand, 15-18 April 2019, pp. 553-562
doi	https://doi.org/10.52842/conf.caadria.2019.1.553
summary	It has been proposed that, after the internet age, we are now entering a new era of the '/Augmented Age/' (King, 2016). Physician Michio Kaku imagined the future of architects will be relying heavily on Augmented Reality technology (Kaku, 2015). Augmented reality technology is not a new technology and has been evolving rapidly. In the last three years, the technology has been applied in mainstream consumer devices (Coppens, 2017). This opened up possibilities in every aspect of our daily lives and it is expected that this will have a great impact on every field of consumer's technology in near future, including design and fabrication. What is the future of design and making? What kind of new digital fabrication paradigm will emerge from inevitable technological development? What kind of impact will this have on the built environment and industry? FlowMorph is a research project developed in the Bartlett School of Architecture, B-Pro AD with the collaboration of the authors and students as a 12 month MArch programme, we developed a unique design project trying to answer these questions which will be introduced in this paper.
keywords	Augmented Reality, Mixed Reality, Virtual Reality, Design Augmentation, Digital Fabrication, Cognition models, Conceptual Designing, Design Process, Design by Making, Generative Design, Computational Design, Human-Machine Collaboration, Human-Computer Collaboration, Human intuition in digital fabrication
series	CAADRIA
email
last changed	2022/06/07 07:51

_id	ijac201614101
id	ijac201614101
authors	Webb, Alexander
year	2016
title	Accepting the robotic other: Why real dolls and spambots suggest a near-future shift in architecture’s architecture
source	International Journal of Architectural Computing vol. 14 - no. 1, 6-15
summary	With weak Artificial Intelligence in the pockets of the majority of American adults, a societal introduction of a strong Artificial Intelligence or sentience seems close. Although the “intelligence” of our phones’ intelligence can be laughably brittle, the learning capacity demonstrated by the Internet of Things suggests more robust intelligence is on the way, and some would say it has already arrived. Several private technology firms have asserted that a robust Artificial Intelligence already exists and thought leaders within computation are lining up to ensure that it is not evil. Regardless of the morality of Artificial Intelligence, if our charge as architects is to design occupiable space, then we need to consider post-anthropocentric ecologies as well as how to adapt our design strategies to reflect inclusion of other species. This article describes two linked lines of thought, a meditation on the pending societal inclusion of the robotic other and why that robotic sentience may arrive from an unexpected origin and can reshape how we conceive of architecture itself.
keywords	Artificial Intelligence, Emergent Design, Robots, Digital Communication, Network Models
series	journal
last changed	2016/06/13 08:34

_id	acadia23_v1_166
id	acadia23_v1_166
authors	Chamorro Martin, Eduardo; Burry, Mark; Marengo, Mathilde
year	2023
title	High-performance Spatial Composite 3D Printing
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 166-171.
summary	This project explores the advantages of employing continuum material topology optimization in a 3D non-standard lattice structure through fiber additive manufacturing processes (Figure 1). Additive manufacturing (AM) has gained rapid adoption in architecture, engineering, and construction (AEC). However, existing optimization techniques often overlook the mechanical anisotropy of AM processes, resulting in suboptimal structural properties, with a focus on layer-by-layer or planar processes. Materials, processes, and techniques considering anisotropy behavior (Kwon et al. 2018) could enhance structural performance (Xie 2022). Research on 3D printing materials with high anisotropy is limited (Eichenhofer et al. 2017), but it holds potential benefits (Liu et al. 2018). Spatial lattices, such as space frames, maximize structural efficiency by enhancing flexural rigidity and load-bearing capacity using minimal material (Woods et al. 2016). From a structural design perspective, specific non-standard lattice geometries offer great potential for reducing material usage, leading to lightweight load-bearing structures (Shelton 2017). The flexibility and freedom of shape inherent to AM offers the possibility to create aggregated continuous truss-like elements with custom topologies.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	ijac201614207
id	ijac201614207
authors	Chaszar, Andre and Sam Conrad Joyce
year	2016
title	Generating freedom: Questions of flexibility in digital design and architectural computation
source	International Journal of Architectural Computing vol. 14 - no. 2, 167-181
summary	Generative processes and generative design approaches are topics of continuing interest and debate within the realms of architectural design and related fields. While they are often held up as giving designers the opportunity (the freedom) to explore far greater numbers of options/alternatives than would otherwise be possible, questions also arise regarding the limitations of such approaches on the design spaces explored, in comparison with more conventional, human-centric design processes. This article addresses the controversy with a specific focus on parametric-associative modelling and genetic programming methods of generative design. These represent two established contenders within the pool of procedural design approaches gaining increasingly wide acceptance in architectural computational research, education and practice. The two methods are compared and contrasted to highlight important differences in freedoms and limitations they afford, with respect to each other and to ‘manual’ design. We conclude that these methods may be combined with an appropriate balance of automation and human intervention to obtain ‘optimal’ design freedom, and we suggest steps towards finding that balance.
keywords	Design space exploration, parametric-associative modelling, genetic programming, mixed-initiative methods
series	journal
last changed	2016/06/13 08:34

_id	ijac201614201
id	ijac201614201
authors	Dorta, Toma?s; Gokce Kinayoglu and Michael Hoffmann
year	2016
title	Hyve-3D and the 3D Cursor: Architectural co-design with freedom in Virtual Reality
source	International Journal of Architectural Computing vol. 14 - no. 2, 87-102
summary	Hybrid Virtual Environment 3D (Hyve-3D) is a system that allows architectural co-design inside Virtual Reality by a new model of interaction through a 3D cursor. It augments the concept of the cursor to better interact with three- dimensional virtual spaces, rethinking it as a drawing/control plane and viewpoints inside the virtual world. Handheld tablets intuitively manipulate 3D cursors. Users can simultaneously access their individual complementary views on the tablets as personal windows into the shared immersive display. They can concurrently sketch in three dimensions, transform, and manipulate three-dimensional objects using the tablets as tangible props and collectively navigate the scene using the tablet as a 3D trackpad. The system implementation and co-design assessments of different settings are presented.
keywords	Co-design, virtual reality, human-computer interaction, 3D cursor and 3D sketching
series	journal
last changed	2016/06/13 08:34

_id	ijac201614202
id	ijac201614202
authors	Jutraz, Anja and Julie Le Moine
year	2016
title	Breaking out: New freedoms in urban (re)design work by adding immersive environments
source	International Journal of Architectural Computing vol. 14 - no. 2, 103-118
summary	Nowadays, urban planning and urban design are facing big changes in the use of different digital tools. Reaching out and engaging citizens and other stakeholders in urban design process are significant for good practice. Main problem discussed in this article is the lack of suitable tools/interfaces for instant collaboration between government, profession, and public. Article focuses on immersive environments, as full immersion could offer better notion of different proposals of urban design. As a case study, Immersive Terf is chosen; more exactly, article focuses on new approach and new development of tool Urban Redesign Terf. Deep immersive collaboration on design could free participant’s mind and increase level of freedom in design/planning process. Immersive environments have already been used in building information modeling (BIM) managment, but innovation part, presented here, are technological: significant changes in the software and walk-through big models, which is the base for urban design and urban planning process.
keywords	Urban planning, immersive environments, virtual worlds, digital tools, public participation
series	journal
last changed	2016/06/13 08:34

_id	ijac201614205
id	ijac201614205
authors	Leitao, Anto?nio; Ines Caetano and Hugo Correia
year	2016
title	Processing architecture
source	International Journal of Architectural Computing vol. 14 - no. 2, 147-157
summary	Programming promotes creative freedom but might require considerable effort to learn. The Processing language was created to simplify this learning process. Due to its graphical capabilities, the language has become very popular among the electronic arts and design communities. Unfortunately, this popularity could not be extended to the architecture community, which relies on traditional heavyweight computer-aided design and building information modeling applications that cannot be programmed using Processing. As a result, it becomes difficult for architects to take advantage of Processing. To solve this problem, we propose an implementation of Processing that runs in the context of the most used computer-aided design tools in architecture. Our implementation allows Processing to generate two- or three-dimensional models that are directly usable for architectural work. To this end, we also propose extensions to the language, including three-dimensional modeling primitives that dramatically simplify the effort needed for developing large and complex architectural models with Processing.
keywords	Generative Design, Programming, Processing, Architecture, 3D Modeling
series	journal
last changed	2016/06/13 08:34

_id	ecaade2016_043
id	ecaade2016_043
authors	Wit, Andrew and Kim, Simon
year	2016
title	rolyPOLY - A Hybrid Prototype for Digital Techniques and Analog Craft in Architecture
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 631-638
doi	https://doi.org/10.52842/conf.ecaade.2016.1.631
wos	WOS:000402063700068
summary	The rapid emergence of computational design tools, advanced material systems and robotic fabrication within the disciplines of architecture and construction has granted designers immense freedom in form and assembly, while retaining pronounced control over output quality throughout the entirety of the design and fabrication process. Simultaneously, the complexity inherent within these tools and processes can lead to a loss of craft though the production of methodologies, forms and artifacts left with extremely recognizable residues from tooling processes utilized during their production. This paper investigates the fecund intersection of digital technologies and handcraft through core-less carbon fiber reinforced polymer (CFRP) winding as a means of creating a new typology of digital craft blurring the line between human and machine. Through the lens of an innovative wound CFRP shelter rolyPOLY completed during the winter of 2015, this paper will show the exigencies and affordances between the realms of digital and analog methodologies of CFRP winding on large-scale structures.
keywords	additive manufacturing; composites; form finding; craft; analog / digital
series	eCAADe
email
last changed	2022/06/07 07:57

_id	lasg_whitepapers_2016_fulltext
id	lasg_whitepapers_2016_fulltext
year	2016
title	Living Architecture Systems Group White Papers 2016
source	Living Architecture Systems Group White Papers 2016 [ISBN 978-1-988366-10-4 (EPUB)] Riverside Architectural Press 2016: Toronto, Canada
summary	Living Architecture Systems Group "White Papers 2016" is a dossier produced for the occasion of the Living Architecture Systems Group launch event and symposium hosted on November 4 and 5 at the Sterling Road Studio in Toronto and the University of Waterloo School of Architecture at Cambridge. The "White Papers 2016" presents research contributions from the LASG partners, forming an overview of the partnership and highlighting oppportunities for future collaborations.
keywords	design, dissipative methods, design methods, synthetic cognition, neuroscience, metabolism, STEAM, organicism, field work, responsive systems, space, visualizations, sensors, actuators, signal flows, art and technology, new media art, digital art, emerging technologies, citizen building, bioinspiration, performance, paradigms, artificial nature, virtual design, regenerative design, 4DSOUND, spatial sound, biomanufacturing, eskin, delueze, bees, robotics
last changed	2019/07/29 14:02

_id	ecaade2016_210
id	ecaade2016_210
authors	Abdelmohsen, Sherif, Massoud, Passaint and Elshafei, Ahmed
year	2016
title	Using Tensegrity and Folding to Generate Soft Responsive Architectural Skins
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 529-536
doi	https://doi.org/10.52842/conf.ecaade.2016.1.529
wos	WOS:000402063700058
summary	This paper describes the process of designing a prototype for a soft responsive system for a kinetic building facade. The prototype uses lightweight materials and mechanisms to generate a building facade skin that is both soft (less dependent on hard mechanical systems) and responsive (dynamically and simultaneously adapting to spatial and environmental conditions). By combining concepts stemming from both tensegrity structures and folding mechanisms, we develop a prototype that changes dynamically to produce varying facade patterns and perforations based on sensor-network data and feedback. We use radiation sensors and shape memory alloys to control the prototype mechanism and allow for the required parametric adaptation. Based on the data from the radiation sensors, the lengths of the shape memory alloys are altered using electric wires and are parametrically linked to the input data. The transformation in the resulting overall surface is directly linked to the desired levels of daylighting and solar exposure. We conclude with directions for future research, including full scale testing, advanced simulation, and multi-objective optimization.
keywords	Soft responsive systems; tensegrity; folding; kinetic facades
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ecaade2016_048
id	ecaade2016_048
authors	Abramovic, Vasilija and Achten, Henri
year	2016
title	From Moving Cube to Urban Interactive Structures - A case study
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 661-668
doi	https://doi.org/10.52842/conf.ecaade.2016.1.661
wos	WOS:000402063700071
summary	When thinking about the future vision of a city, having in mind recent development in digital technologies and digital design tools we are inclined to expect new building structures which incorporate this technology to better help us manage the complexity of life, and to simplify our daily lives and tasks. The idea behind this research paper lies in design of such structures, which could be put inside an urban context and engage in creating a built environment that can add more to the quality of life. For us Interactive architecture is architecture that is responsive, flexible, changing, always moving and adapting to the needs of today. The world is becoming more dynamic, society is constantly changing and the new needs it develops need to be accommodated. As a result architecture has to follow. Spaces have to become more adaptive, responsive and nature concerned, while having the ability for metamorphosis, flexibility and interactivity. Taken as a starting point of this idea is a specific module from graduation project in 2014 "The Unexpected city", where it was possible to test out first ideas about interactive and flexible objects in an urban environment.
keywords	Flexible architecture; Interactive architecture; Responsive systems
series	eCAADe
email
last changed	2022/06/07 07:54

_id	lasg_whitepapers_2016_206
id	lasg_whitepapers_2016_206
authors	Alan Macy
year	2016
title	Commentary Regarding Living Architecture Systems
source	Living Architecture Systems Group White Papers 2016 [ISBN 978-1-988366-10-4 (EPUB)] Riverside Architectural Press 2016: Toronto, Canada pp. 206 - 215
summary	Living Architecture Systems Group "White Papers 2016" is a dossier produced for the occasion of the Living Architecture Systems Group launch event and symposium hosted on November 4 and 5 at the Sterling Road Studio in Toronto and the University of Waterloo School of Architecture at Cambridge. The "White Papers 2016" presents research contributions from the LASG partners, forming an overview of the partnership and highlighting oppportunities for future collaborations.
keywords	design, dissipative methods, design methods, synthetic cognition, neuroscience, metabolism, STEAM, organicism, field work, responsive systems, space, visualizations, sensors, actuators, signal flows, art and technology, new media art, digital art, emerging technologies, citizen building, bioinspiration, performance, paradigms, artificial nature, virtual design, regenerative design, 4DSOUND, spatial sound, biomanufacturing, eskin, delueze, bees, robotics
email
last changed	2019/07/29 14:00

_id	ascaad2016_046
id	ascaad2016_046
authors	Albarakat, Reem; Gehan Selim
year	2016
title	Radicalism vs. Consistency - The Cyber Influence on Individuals’ Non-Routine Uses in the Heritage Public Spaces of Cairo
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 451-460
summary	Since the emergence of the concept of user-generated content websites – Web 2.0, Internet communications have developed as a powerful personal and social phenomenon. Many Internet applications have become partially or entirely related to the concept of social network; and cyberspace has become a space about ‘us’ not ‘where’ we are. This paper investigates the theoretical grounds of the effect of cyber experience on changing the individuals’ uses of the public spaces, and sustaining this change through maintaining the ties and reciprocal influence between actions in physical and cyber spaces. It aims at examining the impact of cyber territories on the perception, definition and effectiveness of personal space within different circumstances; and its role in changing the uses of spaces where people used to act habitually. The personal space, here, will be represented as the core of both: change and consistency – the space of bridging the reciprocal effect of cyber and physical counterparts, which is transformed through the experience of physical events mediated into the cyberspace. The paper is part of a study which looks at the case of Tahrir Square during the Egyptian political movement in 2011. We will compare the activists’ actions and practices in the Square during different events of non-routine use of the square and its surroundings. The case study will show the level of consistency in the features of the produced personal space within different waves of the revolutionary actions for all that different circumstances, motivations and results.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	sigradi2016_601
id	sigradi2016_601
authors	Albarracín, Santiago
year	2016
title	Towards a new Datascape
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.113-117
summary	Architecture since always has been working with data, not only within architecture, but also data influenced by the social environment. MVRDV could be one of the architectural offices which make use of this resource; this methodology of design was called Datascapes. Nowadays, with the arise of smartphones and the Internet of Things there is an excess of data, it is of public domain, and the best of all is that data is continually updated. Apps are changing the habits and the ways that their inhabitants use the city. Through the development of different apps, a new way of represent and live the city has been created, taking the advantage of the data that is produced by their inhabitants.
keywords	Datasets; Internet of Thing; Datascapes
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	lasg_whitepapers_2016_314
id	lasg_whitepapers_2016_314
authors	Alexander Webb
year	2016
title	Accepting the Robotic Other: Why Real Dolls and Spambots Suggest a Near-Future Shift in Architecture’s Architecture
source	Living Architecture Systems Group White Papers 2016 [ISBN 978-1-988366-10-4 (EPUB)] Riverside Architectural Press 2016: Toronto, Canada pp. 314 - 329
summary	Living Architecture Systems Group "White Papers 2016" is a dossier produced for the occasion of the Living Architecture Systems Group launch event and symposium hosted on November 4 and 5 at the Sterling Road Studio in Toronto and the University of Waterloo School of Architecture at Cambridge. The "White Papers 2016" presents research contributions from the LASG partners, forming an overview of the partnership and highlighting oppportunities for future collaborations.
keywords	design, dissipative methods, design methods, synthetic cognition, neuroscience, metabolism, STEAM, organicism, field work, responsive systems, space, visualizations, sensors, actuators, signal flows, art and technology, new media art, digital art, emerging technologies, citizen building, bioinspiration, performance, paradigms, artificial nature, virtual design, regenerative design, 4DSOUND, spatial sound, biomanufacturing, eskin, delueze, bees, robotics
email
last changed	2019/07/29 14:02

_id	ascaad2016_032
id	ascaad2016_032
authors	Alhadidi, Suleiman; Justin Mclean, Luchlan Sharah, Isabel Chia, Roger Sam
year	2016
title	Multiflight - Creating Interactive Stairs through Positive Technology
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 295-308
summary	This paper details a pedagogical project which calls for an improved design performance of the existing built environment through the use of smart technology and data-driven design. The project is an investigation into ways in which to improve the performance of a ‘pre-selected university building’ through the use of a media facade that allows for interactive experiences. Existing problems of the selected building have been identified through observation and research using a rich picture and agile approach. An underutilised staircase was selected as the focus site for a series of computational design and interactive design studies. The brief of this mini-research project aims to encourage more people to use the stairs and create a memorable experience with a technological approach through the application of a site specific interactive media installation. The project is an interactive staircase which utilises LED strips and generative sound. The project features a series of light boxes which are connected to the existing staircase balustrade. Arduino, passive infra-red sensors, and other motion detection sensors were used to allow for light and generative sound interaction with users using visual scripting tools and a generative design platform. Sensing technology was used as a real-time data-gathering device during the site analysis phase as well as an input device for the designed prototype to allow the testing of the data-driven design. This paper details the study and resultant interactive prototypes. It also discusses the exploration of performance based design ideas into design workflows and the integration of sensing tools into the design process. It concludes by identifying possible implications on using the Internet of Things concepts to facilitate the design of interactive architecture.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	sigradi2016_440
id	sigradi2016_440
authors	Amorim, Arivaldo Le?o de
year	2016
title	Cidades Inteligentes e City Information Modeling [Smart Cities and City Information Modeling]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.481-488
summary	This paper presents and discusses the relationship between the concepts of Smart Cities and City Information Modeling (CIM). It conveys the notion that these are complementary and not competing concepts, as one might think at first glance. On the other hand, the paper demonstrates the importance of these concepts to overcome the challenges to the cities of the 21st century, from findings contained in official documents published by the United Nations (UN), to analyze the growth of world population and the emergence of new cities to house population groups. Finally, this paper argues that the CIM with an inducing factor for the Smart City is an important resource to help improve the quality of life in cities.
keywords	Smart Cities; City Information Modeling; Sustainability; Cities of the Future; Information Modeling
series	SIGRADI
email
last changed	2021/03/28 19:58

For more results click below: