Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 618

Reformat results as: short short into frame detailed detailed into frame

_id	acadia16_318
id	acadia16_318
authors	Huang, Alvin
year	2016
title	From Bones to Bricks: Design the 3D Printed Durotaxis Chair and La Burbuja Lamp
doi	https://doi.org/10.52842/conf.acadia.2016.318
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 318-325
summary	Drawing inspiration from the variable density structures of bones and the self-supported cantilvers of corbelled brick arches, the Durotaxis Chair and the La Burbuja lamp explore a material-based design process by responding to the challenge of designing a 3D print, rather than 3D printing a design. As such, the fabrication method and materiality of 3D printing define the generative design constraints that inform the geometry of each. Both projects are seen as experiments in the design of 3D printed three-dimensional space packing structures that have been designed specifically for the machines by which they are manufactured. The geometry of each project has been carefully calibrated to capitalize on a selection of specific design opportunities enabled by the capabilities and constraints of additive manufacturing. The Durotaxis Chair is a half-scale prototype of a fully 3D printed multi-material rocking chair that is defined by a densely packed, variable density three-dimensional wire mesh that gradates in size, scale, density, color, and rigidity. Inspired by the variable density structure of bones, the design utilizes principal stress analysis, asymptotic stability, and ergonomics to drive the logics of the various gradient conditions. The La Burbuja Lamp is a full scale prototype for a zero-waste fully 3D printed pendant lamp. The geometric articulation of the project is defined by a cellular 3D space packing structure that is constrained to the angles of repose and back-spans required to produce un-supported 3D printing.
keywords	parametic design, digital fabrication, structural analysis, additive manufacturing, 3d printing
series	ACADIA
type	paper
email
last changed	2022/06/07 07:50

_id	acadia16_332
id	acadia16_332
authors	Retsin, Gilles; Garcia, Manuel Jimenez
year	2016
title	Discrete Computational Methods for Robotic Additive Manufacturing: Combinatorial Toolpaths
doi	https://doi.org/10.52842/conf.acadia.2016.332
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 332-341
summary	The research presented in this paper is part of a larger, emerging body of research into large-scale 3D printing. The research attempts to develop a computational design method specifically for large-scale 3D printing of architecture. Influenced by the concept of Digital Materials, this research is situated within a critical discussion of what fundamentally constitutes a digital object and process. This requires a holistic understanding, taking into account both computational design and fabrication. The intrinsic constraints of the fabrication process are used as opportunities and generative drivers in the design process. The paper argues that a design method specifically for 3D printing should revolve around the question of how to organize toolpaths for the continuous addition or layering of material. Two case-study projects advance discrete methods as efficient ways to compute a continuous printing process. In contrast to continuous models, discrete models allow users to serialize problems and errors in toolpaths. This allows a local optimization of the structure, avoiding the use of global, computationally expensive, problem-solving algorithms. Both projects make use of a voxel-based approach, where a design is generated directly from the combination of thousands of serialized toolpath fragments. The understanding that serially repeated elements can be assembled into highly complex and heterogeneous structures has implications stretching beyond 3D printing. This combinatorial approach for example also becomes highly valuable for construction systems based on modularity and prefabrication.
keywords	prgrammable materials, simulation and design optimization, digital fabrication, big data
series	ACADIA
type	paper
email
last changed	2022/06/07 07:56

_id	ascaad2016_014
id	ascaad2016_014
authors	Ahmed, Zeeshan Y.; Freek P. Bos, Rob J.M. Wolfs and Theo A.M. Salet
year	2016
title	Design Considerations Due to Scale Effects in 3D Concrete Printing
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 115-124
summary	The effect of scale on different parameters of the 3D printing of concrete is explored through the design and fabrication of a 3D concrete printed pavilion. This study shows a significant gap exists between what can be generated through computer aided design (CAD) and subsequent computer aided manufacturing (generally based on CNC technology). In reality, the 3D concrete printing on the one hand poses manufacturing constraints (e.g. minimum curvature radii) due to material behaviour that is not included in current CAD/CAM software. On the other hand, the process also takes advantage of material behaviour and thus allows the creation of shapes and geometries that, too, can’t be modelled and predicted by CAD/CAM software. Particularly in the 3D printing of concrete, there is not a 1:1 relation between toolpath and printed product, as is the case with CNC milling. Material deposition is dependent on system pressure, robot speed, nozzle section, layer stacking, curvature and more – all of which are scale dependent. This paper will discuss the design and manufacturing decisions based on the effects of scale on the structural design, printed and layered geometry, robot kinematics, material behaviour, assembly joints and logistical problems. Finally, by analysing a case study pavilion, it will be explore how 3D concrete printing structures can be extended and multiplied across scales and functional domains ranging from structural to architectural elements, so that we can understand how to address questions of scale in their design.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	sigradi2016_771
id	sigradi2016_771
authors	Raspall, Felix; Ba?ón, Carlos
year	2016
title	vMESH : How to print Architecture?
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.394-398
summary	The use of 3D printing in architectural research, education and practice has been almost exclusively destined to produce physical representations – models— of designed building. Recent advances in Additive Manufacturing (AM) have exponentially increased the mechanical properties of 3D printed parts, opening new opportunities for this technology to be directly applied to functional architectural components at an increasingly larger scale. Thus, this paper examines the design, structural and aesthetic implications, as well as the feasibility of advanced 3D printing technologies in the production of functional architectural components through the design and prototyping of a customized, non-regular spatial frame system.
keywords	Metal 3D Printing, Volumetric Mesh, Digital Fabrication, Parametric Design, Spatial Frames
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	caadria2016_745
id	caadria2016_745
authors	Suzuki E., Seiichi
year	2016
title	Extruded Architectures: Grading weight-to-strength ratio of cement based materials through extrusion techniques
doi	https://doi.org/10.52842/conf.caadria.2016.745
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 745-754
summary	In recent years, a growing research agenda on the subject of additive manufacturing for architectural design has been established on the basis of jetting and extrusion technology. While jetting pro- vides enough flexibility to print multiple digital materials in a single run, extrusion has proven to be the most viable technique for large- scale and on-site manufacturing. Because major contributions of both research lines cannot be combined due to technological differences, special attention has been devoted towards the development of print- ing strategies that could approximate similar material flexibility of jet- ting by means of extrusion techniques. In this context, this paper pre- sents a computational design methodology for architectural components that enables grading weight-strength ratio of cement based materials through extrusion. Built upon the integration of mod- elling, analysis and fabrication, such methodology allows to optimize material distribution and geometric definition on the basis of physical and fabrication constraints. A case study is presented for describing the design processes of a circular column and the fabrication of a sec- tion it.
keywords	Additive manufacturing; cement based materials; computational design
series	CAADRIA
email
last changed	2022/06/07 07:56

_id	caadria2016_777
id	caadria2016_777
authors	Aditra, Rakhmat F. and Andry Widyowijatnoko
year	2016
title	Combination of mass customisation and conventional construction: A case study of geodesic bamboo dome
doi	https://doi.org/10.52842/conf.caadria.2016.777
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 777-786
summary	With the development of advance fabrication, several digi- tal fabrication approaches have been developed. These approaches en- able better form exploration than the conventional manufacturing pro- cess. But, the built examples mostly rely on advance machinery which was not familiar or available in developed country where construction workers are still abundant. Meanwhile, much knowledge gathers in the field practice. This research is aimed to explore an alternative con- struction workflow and method with the combination of mass custom- ization and conventional construction method and to propose the structure system that emphasized this alternative workflow and meth- od. Lattice structure was proposed. The conventional construction method was used in the struts production and mass customization method, laser cutting, and was used for connection production. The algorithmic process was used mainly for data mining, details design, and component production. The backtracking was needed to be pre- dicted and addressed previously. Considerations that will be needed to be tested by further example are on the transition from the digital pro- cess to the manual process. Next research could be for analysing the other engineering aspect for this prototype and suggesting other struc- tural system with more optimal combination of conventional construc- tion and mass customization.
keywords	Mass customisation; algorithmic design; digital fabrication; geodesic dome; lattice structure
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	acadia23_v1_166
id	acadia23_v1_166
authors	Chamorro Martin, Eduardo; Burry, Mark; Marengo, Mathilde
year	2023
title	High-performance Spatial Composite 3D Printing
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 166-171.
summary	This project explores the advantages of employing continuum material topology optimization in a 3D non-standard lattice structure through fiber additive manufacturing processes (Figure 1). Additive manufacturing (AM) has gained rapid adoption in architecture, engineering, and construction (AEC). However, existing optimization techniques often overlook the mechanical anisotropy of AM processes, resulting in suboptimal structural properties, with a focus on layer-by-layer or planar processes. Materials, processes, and techniques considering anisotropy behavior (Kwon et al. 2018) could enhance structural performance (Xie 2022). Research on 3D printing materials with high anisotropy is limited (Eichenhofer et al. 2017), but it holds potential benefits (Liu et al. 2018). Spatial lattices, such as space frames, maximize structural efficiency by enhancing flexural rigidity and load-bearing capacity using minimal material (Woods et al. 2016). From a structural design perspective, specific non-standard lattice geometries offer great potential for reducing material usage, leading to lightweight load-bearing structures (Shelton 2017). The flexibility and freedom of shape inherent to AM offers the possibility to create aggregated continuous truss-like elements with custom topologies.
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	acadia23_v1_122
id	acadia23_v1_122
authors	Crawford, Assia
year	2023
title	Mycelium Making: An exploration in Growing Modular Interiors
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 122-127.
summary	The project was developed as part of an MArch Architecture design studio that looked at emerging bio-degradable living materials in the form of mycelium bio-composites as a way of manufacturing temporary structures. The project introduced students to laboratory methods for material development and bio-material cultivation. Students were asked to consider the implications of designing with a material that has agency and needs. The studio explored what it means to “make kin” (Haraway 2016) on a planet that has reached a tipping point. It approached the topic from the assumption that the breakdown of existing economic models and resource scarcity offers potent ground for new forms of space making to emerge. The studio looked to nature’s ability to respond to environmental stimuli and design constraints. Students harnessed advances in our scientific understanding to cultivate an architectural language that captures the transient and unstable nature of this new family of biomaterials
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	ijac201614403
id	ijac201614403
authors	Kontovourkis, Odysseas and George Tryfonos
year	2016
title	Design optimization and robotic fabrication of tensile mesh structures: The development and simulation of a custom-made end-effector tool
source	International Journal of Architectural Computing vol. 14 - no. 4, 333-348
summary	This article presents an ongoing research, aiming to introduce a fabrication procedure for the development of tensile mesh systems. The purpose of current methodology is to establish an integrated approach that combines digital form- finding and robotic manufacturing processes by extracting data and information derived through elastic material behavior for physical implementation. This aspires to extend the capacity of robotically driven mechanisms to the fabrication of complex tensile structures and, at the same time, to reduce the defects that might occur due to the deformation of the elastic material. In this article, emphasis is given to the development of a custom-made end-effector tool, which is responsible to add elastic threads and create connections in the form of nodes. Based on additive fabrication logic, this process suggests the development of physical prototypes through a design optimization and tool-path verification.
keywords	Robotic fabrication, tensile mesh structures, real-time response, end-effector tool, multi-objective gentic algorithms, structure optimization, form-finding
series	journal
email
last changed	2016/12/09 10:52

_id	ecaade2017_144
id	ecaade2017_144
authors	Lange, Christian J.
year	2017
title	Elements \| robotic interventions II
doi	https://doi.org/10.52842/conf.ecaade.2017.1.671
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 671-678
summary	Reviewing the current research trends in robotic fabrication around the world, the trajectory promises new opportunities for innovation in Architecture and the possible redefinition of the role of the Architect in the industry itself. New entrepreneurial, innovative start-ups are popping up everywhere challenging the traditional model of the architect. However, it also poses new questions and challenges in the education of the architect today. What are the appropriate pedagogical methods to instill enthusiasm for new technologies, materials, and craft? How do we avoid the pure application of pre-set tools, such as the use of the laser cutter has become, which in many schools around the world has caused problems rather than solving problems? How do we teach students to invent their tools especially in a society that doesn't have a strong background in the making? The primary focus of this paper is on how architectural CAAD/ CAM education through the use of robotic fabrication can enhance student's understanding, passion and knowledge of materiality, technology, and craftsmanship. The paper is based on the pedagogical set-up and method of an M. Arch I studio that was taught by the author in fall 2016 with the focus on robotic fabrication, materiality, traditional timber construction systems, tool design and digital and physical craftsmanship.
keywords	CAAD Education, Digital Technology, Craftsmanship, Material Studies, Tool Design, Parametric Modeling, Robotic Fabrication
series	eCAADe
email
last changed	2022/06/07 07:52

_id	sigradi2016_801
id	sigradi2016_801
authors	Matson, Carrie Wendt; Sweet, Kevin
year	2016
title	Simplified for Resilience: A parametric investigation into a bespoke joint system for bamboo
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.405-411
summary	Research reveals that most of the structural failures in a natural disaster are related to improper construction assembly methodologies related to human errors. This paper aims to reduce human errors in the building process by taking advantage of computational tools, and using a renewable building material. The research investigates the creation of a novel structural system for bamboo that is able to be repaired, replaced, altered, and easily assembled to restore any damaged building structure. Bamboo is an organic product with diameters that are irregular and unpredictable. The inconsistency in this natural product requires an adaptable construction methodology that responds to its organic nature. A customised joint system is created using parametric software that quickly adapts to the irregularity of the bamboo and are then fabricated using additive printing techniques. The parametric software gives unlimited control of the joint system based on the programmed relationships between the differentiations of each unique bamboo connection. Fabricating each unique joint gives a secure connection at each intersection facilitating an adaptable architecture, whilst reducing construction waste. This paper introduces the groundwork for the implementation of “on-site” manufacturing of a framework joint system. The manufacturing utilises the power and performance of a parametric platform with the technology of bespoke three-dimensionally printed joints – a flexible system that can respond to organic materials and natural external conditions
keywords	Parametric design; Three-dimensional printing; Bamboo construction
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2016_113
id	ecaade2016_113
authors	Poinet, Paul, Baharlou, Ehsan, Schwinn, Tobias and Menges, Achim
year	2016
title	Adaptive Pneumatic Shell Structures - Feedback-driven robotic stiffening of inflated extensible membranes and further rigidification for architectural applications
doi	https://doi.org/10.52842/conf.ecaade.2016.1.549
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 549-558
summary	The paper presents the development of a design framework that aims to reduce the complexity of designing and fabricating free-form inflatables structures, which often results in the generation of very complex geometries. In previous research the form-finding potential of actuated and constrained inflatable membranes has already been investigated however without a focus on fabrication (Otto 1979). Consequently, in established design-to-fabrication approaches, complex geometry is typically post-rationalized into smaller parts and are finally fabricated through methods, which need to take into account cutting pattern strategies and material constraints. The design framework developed and presented in this paper aims to transform a complex design process (that always requires further post-rationalization) into a more integrated one that simultaneously unfolds in a physical and digital environment - hence the term cyber-physical (Menges 2015). At a full scale, a flexible material (extensible membrane, e.g. latex) is actuated through inflation and modulated through additive stiffening processes, before being completely rigidified with glass fibers and working as a thin-shell under compression.
wos	WOS:000402063700060
keywords	pneumatic systems; robotic fabrication; feedback strategy; cyber-physical; scanning processes
series	eCAADe
email
last changed	2022/06/07 08:00

_id	ecaade2024_361
id	ecaade2024_361
authors	Sochùrková, Petra; Devyatkina, Svetlana; Kordová, Sára; Vaško, Imrich; Tsikoliya, Shota
year	2024
title	Bioreceptive Parameters for Additive Manufacturing of Clay based Composites
doi	https://doi.org/10.52842/conf.ecaade.2024.1.045
source	Kontovourkis, O, Phocas, MC and Wurzer, G (eds.), Data-Driven Intelligence - Proceedings of the 42nd Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2024), Nicosia, 11-13 September 2024, Volume 1, pp. 45–54
summary	Due to climate change and the problematic amount of waste and CO2 emissions in the construction industry, non-human organisms and sustainable solutions are key motivators of the study. This paper focuses on developing a bioreceptive (Guillitte, 1995) composite suitable for additive manufacturing, composed to support growth of various organisms. It investigates key properties which have shown to be beneficial for promoting biological growth, such as water absorption, water permeability, humidity, and surface texture. The study evaluates the effect of two groups of clay-based waste additives, wooden sawdust (Arslan, et al., 2021) and sediment material sourced from local tunnel excavation in Prague. Simultaneously the need for intelligent reintegration and waste use is prevalent. Additive fabrication offers the ability to test a variety of composites and (re-)integrate them into the manufacturing processes. Current approach explores how to design artificial environments/skins for greenery and small life with the potential to improve both diversity and survivability while maintaining a better climate in its immediate surroundings. Bioreceptive design has the potential to improve the quality of the urban environment and bring new aesthetic influences into it (Cruz and Beckett 2016, p. 51-64).
keywords	Digital Design, Material Research, Bioreceptive Design, Robotic Fabrication, Additive Manufacturing, Experimental Pastes, Bio compatibility, Waste Materials, Clay Composites
series	eCAADe
email
last changed	2024/11/17 22:05

_id	ecaade2017_256
id	ecaade2017_256
authors	Symeonidou, Ioanna
year	2017
title	Reinventing Design-Build projects with the use of digital media for design and construction - A survey of 120 educational pavilions
doi	https://doi.org/10.52842/conf.ecaade.2017.1.231
source	Fioravanti, A, Cursi, S, Elahmar, S, Gargaro, S, Loffreda, G, Novembri, G, Trento, A (eds.), ShoCK! - Sharing Computational Knowledge! - Proceedings of the 35th eCAADe Conference - Volume 1, Sapienza University of Rome, Rome, Italy, 20-22 September 2017, pp. 231-240
summary	During the last decade the hype for digitally fabricated educational pavilions has become very popular among architecture schools. A survey with the aim to catalogue and classify educational pavilions revealed more than 120 cases of digitally fabricated pavilions within the last decade. The analysis of the sample of 120 Design-Build projects built during the period 2006-2016 revealed, apart from obvious similarities and differences, the prevailing trends relating to the materials and the technology used for the design, manufacturing and assembly. From the processing of the gathered data a set of typologies emerge, which relate both to morphological characteristics as well as to the design process. The paper concludes by discussing the advantages and critical points of this educational practice and the learning outcomes for both students and educators.
keywords	Design-Build; Digital fabrication; architectural education; CAD / CAM; pavilions
series	eCAADe
email
last changed	2022/06/07 07:56

_id	caadria2016_569
id	caadria2016_569
authors	Williams, Nicholas and Dharman Gersch
year	2016
title	Developing the Termite Plug-In: Abstracting operations to link 5-axis CNC routers with para-metric CAAD tools
doi	https://doi.org/10.52842/conf.caadria.2016.569
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 569-578
summary	Since the turn of the millennium, architects and designers have used greater access to Computer Aided Manufacturing (CAM) machines to explore links between design and fabrication. This trend is recently manifested in plug-ins for CAD software packages, which enable designers to program industrial robots and additive manufac- turing machines. However, amongst the array of contemporary tools, few connect CAD packages to commercial 5-axis routers and, as a re- sult, designers are forced to use complex CAM software to operate these machines with limited exploration of the interface with design. This paper reports on the development of a CAD plug-in for driving such routers and targeted at designers. It discusses key aspects in the conception of the software libraries for an alpha release of the tool, a plug-in for McNeel Grasshopper named Termite. Primary considera- tions for the development team include the areas and extent of flexi- bility offered in order to enable non-expert users of such machines to use them to in an effective and efficient manner. Key elements of the tools are discussed, including the definition of machining tools, the creation of generic toolpaths and the subsequent writing machine-code files. A set of example pieces are presented to demonstrate the pro- posed approach for flank-milling, patterning and connecting timber components at a furniture scale. These are compared to plug-ins for industrial robot with similar technical knowledge and experience amongst the target audience.
keywords	Digital fabrication; parametric design; architectural proto-types; digital material
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	ecaade2016_043
id	ecaade2016_043
authors	Wit, Andrew and Kim, Simon
year	2016
title	rolyPOLY - A Hybrid Prototype for Digital Techniques and Analog Craft in Architecture
doi	https://doi.org/10.52842/conf.ecaade.2016.1.631
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 631-638
summary	The rapid emergence of computational design tools, advanced material systems and robotic fabrication within the disciplines of architecture and construction has granted designers immense freedom in form and assembly, while retaining pronounced control over output quality throughout the entirety of the design and fabrication process. Simultaneously, the complexity inherent within these tools and processes can lead to a loss of craft though the production of methodologies, forms and artifacts left with extremely recognizable residues from tooling processes utilized during their production. This paper investigates the fecund intersection of digital technologies and handcraft through core-less carbon fiber reinforced polymer (CFRP) winding as a means of creating a new typology of digital craft blurring the line between human and machine. Through the lens of an innovative wound CFRP shelter rolyPOLY completed during the winter of 2015, this paper will show the exigencies and affordances between the realms of digital and analog methodologies of CFRP winding on large-scale structures.
wos	WOS:000402063700068
keywords	additive manufacturing; composites; form finding; craft; analog / digital
series	eCAADe
email
last changed	2022/06/07 07:57

_id	caadria2016_033
id	caadria2016_033
authors	Zhang, Yingyi and Marc Aurel Schnabel
year	2016
title	Form-Based Code in Parametric Modelling for Continuous Urban Design
doi	https://doi.org/10.52842/conf.caadria.2016.033
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 33-42
summary	This paper analyses parametric modelling in connection with the Form-based Code (FBC) methodology to support continuous design in an urban scale. FBC is an approach to optimize conventional zoning regulations and has been implemented by a number of cities. Akin to a utopian urban design solution, we argue that the FBC is cru- cial to develop main objectives, characteristics, trends and impacts in a design process systematically and logically. Zoning emphasizes ex- cessively on land use and intensity control, however, FBC promotes to (re-)create and predict urban-rural environments through controlling forms. FBC is developing and offers opportunities for flexible coding processes, adjustment of density and seamless public participation. Parametric modelling, being rule based, is a significant step towards a continuous urban design creating a mechanism for FBC. This paper presents a framework to connect parametric modelling with FBC pro- cesses, and how parametric modelling methodologies allow the form- based coding processes to be more impeccable hence being more ap- propriate in the process of continuous design flow.
keywords	Form-based code; continuous urban design; parametric modelling; utopian design solution
series	CAADRIA
email
last changed	2022/06/07 07:57

_id	caadria2016_797
id	caadria2016_797
authors	Agusti?-Juan, Isolda and Guillaume Habert
year	2016
title	An environmental perspective on digital fabrication in architecture and construction
doi	https://doi.org/10.52842/conf.caadria.2016.797
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 797-806
summary	Digital fabrication processes and technologies are becom- ing an essential part of the modern product manufacturing. As the use of 3D printing grows, potential applications into large scale processes are emerging. The combined methods of computational design and robotic fabrication have demonstrated potential to expand architectur- al design. However, factors such as material use, energy demands, du- rability, GHG emissions and waste production must be recognized as the priorities over the entire life of any architectural project. Given the recent developments at architecture scale, this study aims to investi- gate the environmental consequences and opportunities of digital fab- rication in construction. This paper presents two case studies of classic building elements digitally fabricated. In each case study, the projects were assessed according to the Life Cycle Assessment (LCA) frame- work and compared with conventional construction with similar func- tion. The analysis highlighted the importance of material-efficient de- sign to achieve high environmental benefits in digitally fabricated architecture. The knowledge established in this research should be di- rected to the development of guidelines that help designers to make more sustainable choices in the implementation of digital fabrication in architecture and construction.
keywords	Digital fabrication; LCA; sustainability; environment
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ascaad2016_052
id	ascaad2016_052
authors	Al-Badry, Sally; Cesar Cheng, Sebastian Lundberg and Georgios Berdos
year	2016
title	Living on the Edge - Reinventing the amphibiotic habitat of the Mesopotamian Marshlands
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 513-526
summary	The Mesopotamian Marshlands form one of the first landscapes where people started to transform and manipulate the natural environment in order to sustain human habitation. For thousands of years, people have transformed natural ecosystems into agricultural fields, residential clusters and other agglomerated environments to sustain long-term settlement. In this way, the development of human society has been intricately linked to the extraction, processing and consumption of natural resources. The Mesopotamian Marshlands, located in one of the hottest and most arid areas on the planet, formed a unique wetlands ecosystem, which apart from millions of people, sustained a very high number of wildlife and endemic species. Several historical, political, social and climatic changes, which densely occurred during the past century, completely destroyed the unique civilisation of the area, made all the wild flora and fauna disappear and forced hundreds of thousands of people to migrate. During the last decade, many efforts have been made to restore the marshlands. However, these efforts are lacking a comprehensive design strategy, coherent goals and deep understanding of the complex current geopolitical situation, making the restoration process an extremely difficult task. This work aims at providing strategies for recovering the Mesopotamian Marshlands, organising productive functions in order to sustain the local population and design a new inhabitation model, using advanced computational tools while taking into account the extreme climatic conditions and several unique cultural aspects. Part of the aim of this work is to advance the use of computation and explore the opportunities that digital tools afford in helping find solutions to complex design problems where various design variables need to be coordinated to satisfy the design goals. Today, advanced computation enables designers to use population consumption demands, ecological processes and environmental inputs as design parameters to develop more robust and resilient regional planning strategies. This work has the double aim of first, presenting a framework for re-inhabiting the Marshlands of Mesopotamia. Second, the work suggests a design methodology based on computer-aided design for developing and organising productive functions and patterns of human occupation in wetland environments.
series	ASCAAD
email
last changed	2017/05/25 13:34

For more results click below: