Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 505

Reformat results as: short short into frame detailed detailed into frame

_id	sigradi2016_583
id	sigradi2016_583
authors	Chiarella, Mauro; Martini, Sebastián; Giraldi, Sebastián; Góngora, Nicolás; Picco, Camila
year	2016
title	Cultura Maker. Dispositivos, Prótesis Robóticas y Programación Visual en Arquitectura y Dise?o para eficiencia energética [Culture Maker. Devices, Prostheses Robotics and Visual Programming in Architecture and Design for energy efficiency.]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.961-968
summary	The Maker movement is the ability to be small and at the same time world; craftsmanship and innovative; high technology and low cost. The Maker movement is doing for physical products what the open source made by the software. The Maker culture emphasizes collaborative learning and distributed cognition. Its knowledge base repository and channels of exchange of ideas and information are: web sites; social networks; the Hackerspaces and Fab-Labs. Three experiences presented with devices; prostheses robotics and CNC machines, based on logical replacement; adaptation and generation. Its authors are undergraduate and graduate fellows Industrial Design and Architecture.
keywords	Maker culture; Prostheses Robotics; Visual Programming; Energy Efficiency; Adaptive Skin
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ascaad2016_048
id	ascaad2016_048
authors	Al Shiekh, Bassam
year	2016
title	Arabic Calligraphy and Parametric Architecture - Translation from a calligraphic force to an architectural form
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 469-482
summary	This paper describes an on-going research that unites two distinct and seemingly unrelated interests. One is Arabic calligraphy and the other is parametric architecture. The effort is to integrate these interests and, in doing so, balance cultural issues with technological ones, traditional with contemporary and spiritual with material. Moreover, this paper is inspired by Arabic calligraphy and its influence on Zaha Hadid’s designs; it is invigorated by parametric systems and their capacity as a source of architectural forms. This paper will observe the rising importance of computation technologies to architecture, which has always been a form of negotiation between ‘function and fiction’ and ‘force and form’. The paper proposes a Parametric Calligraphic Machine that simultaneously produces, connects and separates calligraphic surfaces, calligraphic images and calligraphic reality. Therefore, the goal is to examine this hypothesis in order to produce a set of techniques, tools and methods that inform the three-dimensional design process of Arabic calligraphy’s contemporary possibilities by addressing a process description rather than a state description of creating calligraphic images and calligraphic surfaces. The theoretical approach highlights issues pertaining to calligraphy, spatiality, translation, generative systems, parametric design, visual structure, force and form.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ascaad2016_035
id	ascaad2016_035
authors	Al-Matarneh, Rana; Ihsan Fethi
year	2016
title	Assessing the Impact of CAD Tools on Architectural Design Quality - A case study of graduation projects in Jordan
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 331-350
summary	The current concept of architectural design education in most schools of architecture in Jordan is a blend between manual pen drafting and digital approaches. However, the disconnection between these two methods has resulted in the students' failure to transfer skills learnt through traditional methods to the digital method of CAD. The objective of this study is twofold: to first compare students’ attitudes toward using both methods and to then assess the impact of CAD use on the quality of architectural design. An open-ended questionnaire was designed to measure variables related to students’ preferences toward CAD and traditional methods. The quality of sixty graduation projects at three Jordanian universities was investigated. The results appear to support the assumption that CAD tools are used largely as visual means and thereby cause a marked decline in design quality. These findings call for a reconsideration of the status quo and a rethinking of perhaps the entire architectural educational model.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	sigradi2023_508
id	sigradi2023_508
authors	Barber, Gabriela and Lafluf, Marcos
year	2023
title	Videomapping laboratory. Systematization of experiences 2016-2022
source	García Amen, F, Goni Fitipaldo, A L and Armagno Gentile, Á (eds.), Accelerated Landscapes - Proceedings of the XXVII International Conference of the Ibero-American Society of Digital Graphics (SIGraDi 2023), Punta del Este, Maldonado, Uruguay, 29 November - 1 December 2023, pp. 843–854
summary	This article synthesizes the result of a systematization and analysis of videomapping carried out in “Laboratorio de Visualización Digital Avanzada” in the period 2014-2022, taking as a source the information collected in the investigation "(Lafluf, 2020), it is updated by integrating new experiences and new interpretations. Likewise, the article aims to provide a structured way to describe and analyze videomapping projects, keeping in mind three axes: context project, mapping project, and mapping event. These categories refer to a strategy developed within the methodological framework of the master's thesis "Videomapping en los proyectos del Laboratorio de Visualización Digital Avanzada de la Facultad de Arquitectura Diseno y Urbanismo (Udelar). Caso de estudio: Videomapping Patrimonio Anglo" (Lafluf, 2020) as well as in other investigations to describe the videomapping. Once this set of videomapping projects has been presented, general considerations are made to analyze the surveyed cases.
keywords	New Media Art, video mapping, New Media, Architecture, Projection Mapping
series	SIGraDi
email
last changed	2024/03/08 14:07

_id	ecaade2023_138
id	ecaade2023_138
authors	Crolla, Kristof and Wong, Nichol
year	2023
title	Catenary Wooden Roof Structures: Precedent knowledge for future algorithmic design and construction optimisation
source	Dokonal, W, Hirschberg, U and Wurzer, G (eds.), Digital Design Reconsidered - Proceedings of the 41st Conference on Education and Research in Computer Aided Architectural Design in Europe (eCAADe 2023) - Volume 1, Graz, 20-22 September 2023, pp. 611–620
doi	https://doi.org/10.52842/conf.ecaade.2023.1.611
summary	The timber industry is expanding, including construction wood product applications such as glue-laminated wood products (R. Sikkema et al., 2023). To boost further utilisation of engineered wood products in architecture, further development and optimisation of related tectonic systems is required. Integration of digital design technologies in this endeavour presents opportunities for a more performative and spatially diverse architecture production, even in construction contexts typified by limited means and/or resources. This paper reports on historic precedent case study research that informs an ongoing larger study focussing on novel algorithmic methods for the design and production of lightweight, large-span, catenary glulam roof structures. Given their structural operation in full tension, catenary-based roof structures substantially reduce material needs when compared with those relying on straight beams (Wong and Crolla, 2019). Yet, the manufacture of their non-standard geometries typically requires costly bespoke hardware setups, having resulted in recent projects trending away from the more spatially engaging geometric experiments of the second half of the 20th century. The study hypothesis that the evolutionary design optimisation of this tectonic system has the potential to re-open and expand its practically available design solution space. This paper covers the review of a range of built projects employing catenary glulam roof system, starting from seminal historic precedents like the Festival Hall for the Swiss National Exhibition EXPO 1964 (A. Lozeron, Swiss, 1964) and the Wilkhahn Pavilions (Frei Otto, Germany, 1987), to contemporary examples, including the Grandview Heights Aquatic Centre (HCMA Architecture + Design, Canada, 2016). It analysis their structural concept, geometric and spatial complexity, fabrication and assembly protocols, applied construction detailing solutions, and more, with as aim to identify methods, tools, techniques, and construction details that can be taken forward in future research aimed at minimising construction complexity. Findings from this precedent study form the basis for the evolutionary-algorithmic design and construction method development that is part of the larger study. By expanding the tectonic system’s practically applicable architecture design solution space and facilitating architects’ access to a low-tech producible, spatially versatile, lightweight, eco-friendly, wooden roof structure typology, this study contributes to environmentally sustainable building.
keywords	Precedent Studies, Light-weight architecture, Timber shell, Catenary, Algorithmic Optimisation, Glue-laminated timber
series	eCAADe
email
last changed	2023/12/10 10:49

_id	ecaade2016_191
id	ecaade2016_191
authors	Di Mascio, Danilo, Chiuini, Michele, Fillwalk, John and Pauwels, Pieter
year	2016
title	3D Digital Reconstructions of Lost Buildings - A first critical framing
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 511-520
doi	https://doi.org/10.52842/conf.ecaade.2016.2.511
wos	WOS:000402064400051
summary	This paper presents a first critical framing of 3D digital reconstructions of lost buildings, hence focusing on reconstructions using 3D models. This critical framing is constituted by reflections on definitions, concepts, methodologies and digital technologies. Much experimentation in the digital reconstruction of lost buildings has produced valuable results during the last twenty years, but the variety of methods, software types, and purposes should be reorganized into clear operational protocols to allow sharing of information and collaboration across disciplines. We have therefore investigated the diverse approaches towards digital reconstructions of lost buildings and found that digital reconstructions are not typically aimed at simple visualizations: they are often further developed in virtual environments, information systems and tools for simulations and analysis. In this sense they are not products but instruments for further research and/or heritage conservation. Counter the large number of theoretical positions, methods and tools specific to different disciplines, such as architecture and archaeology, we can find the almost total absence of a comprehensive critical assessment. This paper, which is part of a larger project, intends to open and articulate a debate on how to define, analyze and critically systematize the methodologies for the digital reconstruction of lost buildings.
keywords	Digital reconstruction; lost buildings; 3d modelling; information systems; virtual environments.
series	eCAADe
type	normal paper
email
more	admin
last changed	2022/06/07 07:55

_id	ecaade2016_ws-dheritage
id	ecaade2016_ws-dheritage
authors	Di Mascio, Danilo, Kepczynska-Walczak, Anetta and , Nicholas Webb
year	2016
title	Contextualized Digital Heritage Workshop - Oulu
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 59-62
doi	https://doi.org/10.52842/conf.ecaade.2016.1.059
wos	WOS:000402063700005
summary	Constructions pertaining to built heritage represent precious material and cultural resources to be studied and preserved for present and future generations. In recent years, this built heritage is increasingly understood, documented, managed, analysed and disseminated through the application of several digital technologies; this trend has created one of the main research areas in architecture, called Digital Heritage. Digital technologies open up alternative and new possibilities in the study of tangible and intangible features of built heritage. This workshop aims to create a space to allow scholars to discuss, share and apply their knowledge in a digital heritage exercise contextualized in Oulu.
keywords	Digital Heritage; Context; Built Heritage; Digital Technologies
series	eCAADe
type	normal paper
email
more	admin
last changed	2022/06/07 07:55

_id	ascaad2016_056
id	ascaad2016_056
authors	Dutt, Florina; Subhajit Das
year	2016
title	Geospatial Tool Evaluating Job Location Mismatch, Based on Available Workforce and Transit Options - Evaluating property location in a city using large-scale datasets
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 557-566
summary	The paper addresses the issue of spatial mismatch of jobs and the accessibility to job locations based on different age, income and industry group. Taking Atlanta as a case study, we developed a geospatial analysis tool enabling developers, the city planning bureau and the residents to identify potential sites of redevelopment with better economic development opportunities. It also aids to find potential location to live with respect to user’s choices for transit options, walkability, job location and proximity to chosen land use. We built our model on a block level in the city, imparting them a score, visualizing the data as a heat map. The metrics to compute the score included proximity to job, proximity to worker’s residence, transit availability, walkability and number of landmark elements near the site. We worked with Longitudinal Employer-Household Dynamics (LEHD) Data along with residence area characteristics (RAC) and work place area characteristic (WAC) data sets, where the total number of data-points was over 3 million. It was challenging for us to optimize computation such that the prototype performs statistical analysis and updates visualization in real time. The research further is prototyped as a web application leveraging Leaflet’s Open Street Maps API and D3 visualization plugin. The research showed that there is a high degree of spatial mismatch between home and job locations with very few jobs with driving distance within 5 -10 miles with limited transit options in Atlanta. Further, it showed that low-earning workers need to travel significantly larger distance for work compared to higher class.
series	ASCAAD
email
last changed	2017/05/25 13:34

_id	cdrf2023_526
id	cdrf2023_526
authors	Eric Peterson, Bhavleen Kaur
year	2023
title	Printing Compound-Curved Sandwich Structures with Robotic Multi-Bias Additive Manufacturing
source	Proceedings of the 2023 DigitalFUTURES The 5st International Conference on Computational Design and Robotic Fabrication (CDRF 2023)
doi	https://doi.org/https://doi.org/10.1007/978-981-99-8405-3_44
summary	A research team at Florida International University Robotics and Digital Fabrication Lab has developed a novel method for 3d-printing curved open grid core sandwich structures using a thermoplastic extruder mounted on a robotic arm. This print-on-print additive manufacturing (AM) method relies on the 3d modeling software Rhinoceros and its parametric software plugin Grasshopper with Kuka-Parametric Robotic Control (Kuka-PRC) to convert NURBS surfaces into multi-bias additive manufacturing (MBAM) toolpaths. While several high-profile projects including the University of Stuttgart ICD/ITKE Research Pavilions 2014–15 and 2016–17, ETH-Digital Building Technologies project Levis Ergon Chair 2018, and 3D printed chair using Robotic Hybrid Manufacturing at Institute of Advanced Architecture of Catalonia (IAAC) 2019, have previously demonstrated the feasibility of 3d printing with either MBAM or sandwich structures, this method for printing Compound-Curved Sandwich Structures with Robotic MBAM combines these methods offering the possibility to significantly reduce the weight of spanning or cantilevered surfaces by incorporating the structural logic of open grid-core sandwiches with MBAM toolpath printing. Often built with fiber reinforced plastics (FRP), sandwich structures are a common solution for thin wall construction of compound curved surfaces that require a high strength-to-weight ratio with applications including aerospace, wind energy, marine, automotive, transportation infrastructure, architecture, furniture, and sports equipment manufacturing. Typical practices for producing sandwich structures are labor intensive, involving a multi-stage process including (1) the design and fabrication of a mould, (2) the application of a surface substrate such as FRP, (3) the manual application of a light-weight grid-core material, and (4) application of a second surface substrate to complete the sandwich. There are several shortcomings to this moulded manufacturing method that affect both the formal outcome and the manufacturing process: moulds are often costly and labor intensive to build, formal geometric freedom is limited by the minimum draft angles required for successful removal from the mould, and customization and refinement of product lines can be limited by the need for moulds. While the most common material for this construction method is FRP, our proof-of-concept experiments relied on low-cost thermoplastic using a specially configured pellet extruder. While the method proved feasible for small representative examples there remain significant challenges to the successful deployment of this manufacturing method at larger scales that can only be addressed with additional research. The digital workflow includes the following steps: (1) Create a 3D digital model of the base surface in Rhino, (2) Generate toolpaths for laminar printing in Grasshopper by converting surfaces into lists of oriented points, (3) Generate the structural grid-core using the same process, (4) Orient the robot to align in the direction of the substructure geometric planes, (5) Print the grid core using MBAM toolpaths, (6) Repeat step 1 and 2 for printing the outer surface with appropriate adjustments to the extruder orientation. During the design and printing process, we encountered several challenges including selecting geometry suitable for testing, extruder orientation, calibration of the hot end and extrusion/movement speeds, and deviation between the computer model and the physical object on the build platen. Physical models varied from their digital counterparts by several millimeters due to material deformation in the extrusion and cooling process. Real-time deviation verification studies will likely improve the workflow in future studies.
series	cdrf
email
last changed	2024/05/29 14:04

_id	sigradi2016_809
id	sigradi2016_809
authors	García Amen, Fernando; Martín Iglesias, Rodrigo; Schieda, Alejandro; Lagomarsino, Federico; Miret, Santiago
year	2016
title	Digital domes that become urban symbionts
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.892-896
summary	Montevideo has a new visitor. In the heritage building of the german architect Karl Trambauer, located in the Old City, a new presence was installed filling the vacuum left by its former collapsed dome, seeking to restore a message, adding a new vision and recovering the lost dialogue between the architecture, the city and its inhabitants. This paper summarizes and explains the experience of the workshop Adaptation 2015, held on September 2015 at the Universidad de la República, Uruguay. Exposing the theoretical framework, design strategies, morphogenetic development, digital manufacturing experimentations, conclusions and open questions from the experience made. We will go through this temporary intervention on Trambauer’s building, being a rare but symbiotic object, with parametric genes, digital and handcrafted manufacture, and also looking for the impact of theory and academic practices in the city.
keywords	Urban intervention – Cities – Heritage – Parametric design – Digital fabrication
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	acadia23_v1_40
id	acadia23_v1_40
authors	Imai, Nate; Conway, Matthew; Lee, Rachel
year	2023
title	The Colors We Share
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 40-47.
summary	The Colors We Share is the winning proposal for a permanent public art installation that will be built in Los Angeles’s Little Tokyo (Figure 1). Selected through a rigorous open Request for Proposals (RFP) process organized by the city, the project honors the community’s rich and multivalent history and celebrates the voices of its next generation. In collaboration with the Little Tokyo Service Center (LTSC), the installation will feature a digital archive and will incorporate imagery gathered through social media to connect with other Nihonmachi (Japanese-descendant) communities across the globe in real time (Densho, n.d.). The vision for the project is two-fold: 1) to construct a vertical gateway that connects with the adjacent neighborhood, and 2) to create a dynamic display that allows community members to see themselves in the structure and connect with other Nihonmachi through locally, nationally, and internationally collected images and colors (Figure 2). In reference to the conference theme, this digital interface draws upon Dana Cuff and Jennifer Wolch’s Urban Humanities framework and creates a physical landmark that parses through an abundance of information to reveal the scarce voices and stories of a minority population (Cuff and Wolch 2016).
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

_id	ecaade2016_215
id	ecaade2016_215
authors	Kouchaki, Mohammad, Mahdavinejad, Mohammadjavad, Zali, Parastoo and Ahmadi, Shahab
year	2016
title	Magnet-based Interactive Kinetic Bricks
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 213-218
doi	https://doi.org/10.52842/conf.ecaade.2016.1.213
wos	WOS:000402063700024
summary	Brick has been used in construction since ancient times and has been respected among other tectonic materials through out the history. Novel technologies recently have opened new horizons in using brick in architectural design. This paper investigates innovative implementation of bricks in kinetic architecture. Kinetic structures usually employ complex and high-cost mechanisms to come into force and their movements might be limited to some conditions. By the use of magnet in digital design, this research examines new methods for performing simple and affordable kinetic structures so as to create interactive relations between architecture and human being. Magnetic energy is applied in two ways to move a roof made of brick which is considered a heavy and masonry material. Consequently, it represents the hidden potentials of magnet as a renewable source of energy.
keywords	kinetic architecture; interactive design; parametric design; Bricklaying; magnet energy
series	eCAADe
email
last changed	2022/06/07 07:51

_id	sigradi2016_602
id	sigradi2016_602
authors	Mattos, Erica Azevedo da Costa e; Silva, Diego Fagundes da
year	2016
title	Módulos Eletrônicos Interativos: Cibernética e Indeterminaç?o para a Exploraç?o e Aprendizagem em Design [Interactive Electronic Modules: Cybernetics and Uncertainties for Exploration and Learning in Design]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.782-789
summary	This paper discusses the ongoing development process of an electronic experimentation and learning open system composed by discrete modular units. Our aim is to create an expandable tool capable of support architecture students with the development of notions about electronic systems, digital interactions and the incorporation of uncertainties in design. The theoretical framework of the research is here presented - discussing design, ethics, Second-Order Cybernetics and knowledge construction theories. Also, precedent work on construction kits are introduced for critical analysis and comparison. We concluded our paper with a possible application in an actual educational setting.
keywords	Design; Second-Order Cybernetics; Learning Processes; Modules; Electronic Building Blocks
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ecaade2016_161
id	ecaade2016_161
authors	Nan, Cristina, Patterson, Charlie and Pedreschi, Remo
year	2016
title	Digital Materialization: Additive and Robotical Manufacturing with Clay and Silicone
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 345-354
doi	https://doi.org/10.52842/conf.ecaade.2016.1.345
wos	WOS:000402063700039
summary	Through the use of algorithmic design methods and an ever growing variety of digital fabrication tools the complexity of process in the architectural discipline seems to be increasing. As this statement might apply to a variety of different areas of computational design and process management, this perceived growing complexity does not have to be viewed as unnecessary complication of design processes, if palpable and justifiable benefits occur. This paper intends to analyse and investigate the potential arising from digital tools of fabrication, specifically robots and 3D printers, and from open source platforms on exploring and managing complexity while enabling both simplicity of process and simplicity of implementation through emerging open source cultures. Building on this assumptions, this paper explores the professional possibilities generated the implementation of robotics as part of the academic curriculum. The theoretical concept of Machinecraft will be introduced and showcased on two research project, both focussing on advanced digital tools, additive manufacturing and machine engineering. Please write your abstract here by clicking this paragraph.
keywords	Additive Manufacturing; 3D Printing; Robotics; Digital Fabrication; Open Source; Architectural Education
series	eCAADe
email
last changed	2022/06/07 07:59

_id	caadria2016_239
id	caadria2016_239
authors	Prohasky, Daniel J.; Rafael Moya Castro, Simon Watkins and Jane Burry
year	2016
title	Design Driven Physical Experimentation: A flexible wind sensing platform for architects
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 239-248
doi	https://doi.org/10.52842/conf.caadria.2016.239
summary	Architectural design in this ‘digital age’ is becoming more embedded within virtual computer aided design environments. This study expands this virtual design environment back into physical realms through the use of microelectronic wind sensing technology. An interactive and flexible wind sensing system (open source minia- ture portable wind tunnel and wind sensors) was evaluated for its abil- ity to simulate and measure the effects of wind. Physical models of four high-rise buildings were constructed to evaluate ground level pe- destrian comfort resulting from the degree of torsional twist in the building form. The model investigation formed a case study for evalu- ating of the low-cost miniature portable wind tunnel and microelec- tronic wind sensing system for comparison with an industrial aeronau- tical wind tunnel and high precision wind sensors.
keywords	Architectural wind tunnel; microelectronic wind sensing; twisted building; wind visualisation
series	CAADRIA
email
last changed	2022/06/07 08:00

_id	sigradi2016_611
id	sigradi2016_611
authors	Reial, Clara; Ribeiro, Clarissa; Nobre, Emanuelle; Nunes, Yasmin; Medeiros, Petrick; Freitas, Lara
year	2016
title	Estruturas Complexas Adaptativas: Modelagem Analógica integrada ? Parametrizaç?o e Comutaç?o Física [Complex Adaptive Structures: Analog Modeling combined with Parametricism and Physical Computing]
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.743-747
summary	The present article presents an academic experiment that was designed to promote a productive dialogue between Architecture and Mechatronics. Structured as a joint initiative the project involves fist year students from Architecture and Urban Planning and from Automation and Control Engineering. The process was directed and supervised by professors of both disciplines at the University of Fortaleza, Brazil. The teams of students were invited to explore and mastering basic knowledge in electronics, physical computing and modeling strategies for complex geometries considering real life problems involving both areas. Here we present an open critique to the didactic experiment from the perspective of a group of students.
keywords	Crowdthinking; adaptive architecture; robotics in architecture; transdisciplinary strategies; modeling strategies for complex geometries
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	sigradi2016_399
id	sigradi2016_399
authors	Trujillo, Juliana Couto; Alves, Gilfranco Medeiros
year	2016
title	Digital mediation and occupation of public space: hybrid spaces for connection and cultural resistance
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.14-19
summary	This paper presents a specific aspect of PhD research in progress titled “Hybrid dimensions of public space: from participatory city to collaborative city”. By studying two urban interventions in the older railway complex in Campo Grande / MS, one using the video mapping and other digital graffiti techniques, the paper brings the discussion of the hybrid condition of public spaces as a locus of conflict and social interactions in cities, which allow a collective and continued construction, proposing to imagine a pluralistic and inclusive society. The technological support strengthens the connection relations, giving new meanings to the local architecture through the images projected and open space for communication, emerging the cultural resistance.
keywords	Digital culture; Public Space; Collaborative process; Digital graffiti; Vídeo mapping
series	SIGRADI
email
last changed	2021/03/28 19:59

_id	ecaadesigradi2019_561
id	ecaadesigradi2019_561
authors	Cress, Kevan and Beesley, Philip
year	2019
title	Architectural Design in Open-Source Software - Developing MeasureIt-ARCH, an Open Source tool to create Dimensioned and Annotated Architectural drawings within the Blender 3D creation suite.
source	Sousa, JP, Xavier, JP and Castro Henriques, G (eds.), Architecture in the Age of the 4th Industrial Revolution - Proceedings of the 37th eCAADe and 23rd SIGraDi Conference - Volume 1, University of Porto, Porto, Portugal, 11-13 September 2019, pp. 621-630
doi	https://doi.org/10.52842/conf.ecaade.2019.1.621
summary	MeasureIt-ARCH is A GNU GPL licensed, dimension, annotation, and drawing tool for use in the open source software Blender. By providing free and open tools for the reading and editing of architectural drawings, MeasurIt-ARCH allows works of architecture to be shared, read, and modified by anyone. The digitization of architectural practice over the last 3 decades has brought with it a new set of inter-disciplinary discourses for the profession. An attempt to utilise 'Open-Source' methodologies, co-opted from the world of software development, in order to make high quality design more affordable, participatory and responsible has emerged. The most prominent of these discussions are embodied in Carlo Raitti and Mathew Claudel's manifesto 'Open-Source Architecture' (Ratti 2015) and affordable housing initiatives like the Wikihouse project (Parvin 2016). MeasurIt-ARCH aims to be the first step towards creating a completely Open-Source design pipeline, by augmenting Blender to a level where it can be used produce small scale architectural works without the need for any proprietary software, serving as an exploratory critique on the user experience and implementations of industry standard dimensioning tools that exist on the market today.
keywords	Blender; Open-Source; Computer Aided Design ; OSArc
series	eCAADeSIGraDi
email
last changed	2022/06/07 07:56

_id	lasg_whitepapers_2016_fulltext
id	lasg_whitepapers_2016_fulltext
year	2016
title	Living Architecture Systems Group White Papers 2016
source	Living Architecture Systems Group White Papers 2016 [ISBN 978-1-988366-10-4 (EPUB)] Riverside Architectural Press 2016: Toronto, Canada
summary	Living Architecture Systems Group "White Papers 2016" is a dossier produced for the occasion of the Living Architecture Systems Group launch event and symposium hosted on November 4 and 5 at the Sterling Road Studio in Toronto and the University of Waterloo School of Architecture at Cambridge. The "White Papers 2016" presents research contributions from the LASG partners, forming an overview of the partnership and highlighting oppportunities for future collaborations.
keywords	design, dissipative methods, design methods, synthetic cognition, neuroscience, metabolism, STEAM, organicism, field work, responsive systems, space, visualizations, sensors, actuators, signal flows, art and technology, new media art, digital art, emerging technologies, citizen building, bioinspiration, performance, paradigms, artificial nature, virtual design, regenerative design, 4DSOUND, spatial sound, biomanufacturing, eskin, delueze, bees, robotics
last changed	2019/07/29 14:02

_id	ascaad2016_049
id	ascaad2016_049
authors	Abdelsabour, Inas; Heba Farouk
year	2016
title	Impact of Using Structural Models on Form Finding - Incorporating Practical Structural Knowledge into Design Studio
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 483-492
summary	Physical Models as an architectural design tool, had major effect on architecture learning process. In structural form finding, it helped in improving visual design thinking to track form creation processes during form finding design stage. The aim is to study the impact of using physical models for second year architecture students in design studios learning. By analyzing and comparing students’ performance and progress; to clarify the effect of using physical models as a tool for designing progression, followed by analytical study on the students' structural models, in order to investigate the influence of models on their design educational progress. Research achieved that there were three basic phases the students pass through during form finding process when used manual physical models that improve the students' design capability.
series	ASCAAD
email
last changed	2017/05/25 13:33

For more results click below: