Cumincad : CUMINCAD Papers : Search Results

CumInCAD is a Cumulative Index about publications in Computer Aided Architectural Design
supported by the sibling associations ACADIA, CAADRIA, eCAADe, SIGraDi, ASCAAD and CAAD futures

PDF papers
References

Hits 1 to 20 of 622

Reformat results as: short short into frame detailed detailed into frame

_id	ascaad2016_009
id	ascaad2016_009
authors	Elbasdi, Gulay; Sema Alaçam
year	2016
title	An Investigation on Growth Behaviour of Mycelium in a Fabric Formwork
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 65-74
summary	Most progress in designing mycelium-based material to date has been made by using petri dish and 3d printed geometries. In this study, reshaping capabilities of mycelium-based materials using fabric formwork is being discussed. This ongoing study is the result of a series of experiments about mycelium-based material that aims to investigate its potentials as free- form geometry. In this paper, we aim to make a comparison between initial and end shapes by implementing digital and analogue tools based on mycelium-based fabric formwork experiment. The physical experiment setup consists of different initial geometry alternatives and the deformation will be observed and measured numerically by time-based recording on top and section views. With the help of digital tools, experiments will be documented as a process of formation. We aim to discuss the potential of the usage of mycelium as a binding agent in free form geometry since mycelium acts as natural self-assembling glue. By doing so, structural potentials of the material, which is strengthened by mycelium hyphae, were examined. This study aims to contribute to the design research studies and scientific knowledge together to integrate living systems into the material design as encouraging collaborative interdisciplinary research, thereby positioning designer as a decision-maker from the very beginning of material design process.
series	ASCAAD
email
last changed	2017/05/25 13:13

_id	ecaade2016_134
id	ecaade2016_134
authors	Kieferle, Joachim B. and Katodrytis, George
year	2016
title	Fabricating Semi Predictable Surfaces - A workshop series on digitally fabricating freeform surfaces with aggregates
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 329-334
doi	https://doi.org/10.52842/conf.ecaade.2016.1.329
wos	WOS:000402063700037
summary	Working with CNC routers and robots is widely used in architecture and fabrication. Our paper describes ways to use these tools more intuitively yet accurately and without a profound knowledge. We have developed a workshop format, in which even inexperienced participants are able to quickly start working with these tools by shaping the non-rigid material sand. Various production methods and tools are incorporated such as "manual", "gestural", "CNC" and "robotic" to create various 3D forms which are captured by methods like 3D scanning, vacuum forming or glueing.
keywords	Education; Digital Fabrication; Sand surface; Formwork
series	eCAADe
email
last changed	2022/06/07 07:52

_id	caadria2016_013
id	caadria2016_013
authors	Aschwanden, Gideon D.P.A.
year	2016
title	Neighbourhood detection with analytical tools
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 13-22
doi	https://doi.org/10.52842/conf.caadria.2016.013
summary	The increasing population size of cities makes the urban fabric ever more complex and more disintegrated into smaller areas, called neighbourhoods. This project applies methods from geoscience and software engineering to the process of identification of those neighbourhoods. Neighbourhoods, by nature, are defined by connec- tivity, centrality and similarity. Transport and geospatial datasets are used to detect the characteristics of places. An unsupervised learning algorithm is then applied to sort places according to their characteris- tics and detect areas with similar make up: the neighbourhood. The at- tributes can be static like land use or space syntax attributes as well as dynamic like transportation patterns over the course of a day. An un- supervised learning algorithm called Self Organizing Map is applied to project this high dimensional space constituting of places and their attributes to a two dimensional space where proximity is similarity and patterns can be detected – the neighbourhoods. To summarize, the proposed approach yields interesting insights into the structure of the urban fabric generated by human movement, interactions and the built environment. The approach represents a quantitative approach to ur- ban analysis. It reveals that the city is not a polychotomy of neigh- bourhoods but that neighbourhoods overlap and don’t have a sharp edge.
keywords	Data analytics; urban; learning algorithms; neighbourhood delineation
series	CAADRIA
email
last changed	2022/06/07 07:54

_id	ecaade2016_058
id	ecaade2016_058
authors	Aschwanden, Gideon
year	2016
title	Big Data for Urban Design - The impact of centrality measures on business success
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 2, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 457-462
doi	https://doi.org/10.52842/conf.ecaade.2016.2.457
wos	WOS:000402064400045
summary	This paper investigates the role of spatial parameters in relation to the economic dynamic embedded in the urban fabric. The key element explored in this study is the role of the urban configuration and accessibility on the success of different business sectors in Switzerland.The underlying hypothesis is that economic markets are constant forces of change influencing the development of cities and functions on all scales. Markets are institutions that reduce people's choices based on a myriad of factors to a single number, the price. Accessibility is a resource for each business that yields multiple values of benefits and transactions in terms of economic properties. This project explores the interaction of multiple measures of accessibility, calculated by Space Syntax analysis, with the success of different markets represented by employment by business sector. 828548 business locations and 44 spatial measures were used to derive associations between them. The results show that the measure of 'Choice' correlates highly for smaller radii and 'Integration' for larger radii with the total number of jobs. The result also shows each sector has a specific set of accessibility measures that allows them to thrive.
keywords	Big Data; Centrality; Economy; Accessibility; Urban Design
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2016_023
id	ascaad2016_023
authors	Ayoub, Mohammed
year	2016
title	Associative Parametric Urbanism - A computational approach to parameterization of conceptual design phase
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 207-216
summary	Urban planning projects usually comprise a complex set of objectives that needs to be addressed by developing a number of proposals. This requires a lot of repetitive steps resulting in fewer and slowly-developed design alternatives. To address the limitations of the existing system, this research introduces the merge of associative parametric design tools with the conceptual design phase of urban planning process to propose a Parameterized Conceptual Design Phase. The developed Associative Algorithm within the proposed phase represents a computational approach that translates a site’s settings into local attractors to define urban fabric, and provide the designer with variations for optimal solutions. The Informal Settlement of Ezbet El Matar, Alexandria, is selected as the case study of this approach.
series	ASCAAD
email
last changed	2017/05/25 13:31

_id	ecaade2016_151
id	ecaade2016_151
authors	Blonder, Arielle and Grobman, Yasha Jacob
year	2016
title	Natural Complexity - Embedded Fabric Materiality in Fibre-Reinforced Polymer Fabrication
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 581-589
doi	https://doi.org/10.52842/conf.ecaade.2016.1.581
wos	WOS:000402063700063
summary	Fibre composites are synthetic in their composition, but structured similarly to biological materials, as fibre and matrix. While the fibre constituent in Fibre-Reinforced Polymer (FRP) is mostly used under the form of fabrics, its standard fabrication processes do not rely on its inherent textile attributes. Embedding the fabric qualities in the fabrication of architectural FRP can potentially introduce concepts and properties of biological materials into engineered fibre composites; it can promote and enable the generation of an architectural complexity of a biological nature. The paper presents Fabric Materiality as a framework for a new design and fabrication process and demonstrates through a case study its integration in the fabrication of architectural FRP elements to achieve a complex structure with bio-inspired properties.
keywords	Textile; Materiality; Self-organisation; Resilience; Composites; FRP
series	eCAADe
email
last changed	2022/06/07 07:52

_id	ecaade2016_027
id	ecaade2016_027
authors	Carl, Timo and Stepper, Frank
year	2016
title	"Free Skin" Collaboration - Negotiating complex design criteria across different scales with an interdisciplinary student team
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 591-600
doi	https://doi.org/10.52842/conf.ecaade.2016.1.591
wos	WOS:000402063700064
summary	The complex nature of architecture requires often planning teams with specialists from multiple disciplines. Architectural education however, addresses this interdisciplinary modus operandi rarely. This paper presents the design and production process of a real world solar façade installation realized at the University of Kassel to illustrating the potentials of such an approach. Interdisciplinary teamwork allowed students not only to solve complex problems, but also to produce knowledge and to advance into design research. Student exploration resulted in a unique fabrication technique, combining tensile fabric and resin to facilitate the fabrication of multifunctional, monocoque shells; combining all necessary technical components in a single building element. This paper discusses the success of student collaboration and teaching strategies for key parts of the design process at different scales. Moreover, it highlights the importance of physical form-finding models and an analogue - digital workflow for collaborative communication. The Free Skin project offers both insight into applied use of interdisciplinary teamwork, and a proposal for incorporating such collaboration into architectural education.
keywords	interdisciplinary collaboration; design-build; form-finding; reactive design; shell structures
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2016_041
id	ascaad2016_041
authors	Kartalou, Nikolia
year	2016
title	Visualising Heritage-Memory - The paradigm of Chambers Street
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 399-408
summary	Aristotle in his treatise, On the Soul, defined memory as knowledge of the past, obtained through seeing, sensing, observing, listening and learning. Memory can be envisaged as the mental imprint of an image that can be recalled through the experience of existing objects and places. How is cultural heritage related to the experience and knowledge called memory? Why do memories appear to have a strong influence in unconscious spatial perception? How can visualisation techniques activate heritage-memory? Buildings, as tangible elements of the historic city, disclose the memories of the past into the present, and direct us to an experience of time through matter. Buildings serve as a link bridging the past with the present, and eventually, the future sites of memory. Their fabric is constantly altered with engraved layers of historical change, a sequence of past events which emerge from the remnants of their structure. The past, imprinted on the city’s artefacts, manifests its tangible form, and through a new reading of heritage, as ‘heritage-memory’, immaterial qualities of previous eras can perhaps be revealed. This paper, part of an ongoing research situated in between theory and practice, argues that the immaterial elements of cultural heritage emerging from historic urban spaces, can be critically explored in a new way through the use of digital technology, as a tool to revisualise the memory of a locus. Taking Chambers Street in the Old Town of Edinburgh as a site of focus, this presentation demonstrates several steps towards visualising the heritage-memory of the site. The paper poses the question of how the site might serve as a memorial itself, revealing to the observer the knowledge of past events engraved on its locus. Chambers Street serves as a paradigm of constructing a virtual narrative of heritage-memory, examining the site in parts and whole.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	acadia16_290
id	acadia16_290
authors	Wang, Adam; Ahlquist, Sean
year	2016
title	Pneumatic Textile System
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 290-297
doi	https://doi.org/10.52842/conf.acadia.2016.290
summary	This paper attempts to demonstrate a seamless transformable material system through an interdependent designed assembly of two materials with different material properties (anisotropic knit textile and isotropic silicone) but similar behaviors (stretch). The transformable system is achieved by balancing the volumetric expansion through a silicone tube, under inflation, with the controlled resistance to stretch by a custom knit fabric. The use of a CNC knitting machine allows not only an opportunity to program the stretch behavior of a knit fabric, by controlling the amount of yarn material to be deposited, but also an ability to knit multiple layers of fabric simultaneously, in order to create a space capable of accommodating an external element seamlessly. The paper will showcase a series of experiments ranging from the initial search for compatible material combinations to the varied structures of the tube sleeve and its relationship with surrounding region. The final prototype attempts to utilize the various behavioral properties of the material system learned from the experiments to create a transformable three-dimensional structure.
keywords	fabric, knit, cnc knitting, pneumatic textile, embedded responsiveness
series	ACADIA
type	paper
email
last changed	2022/06/07 07:58

_id	caadria2016_539
id	caadria2016_539
authors	Lublasser, E.; J. Braumann, D. Goldbach and S. Brell-Cokcan
year	2016
title	Robotic Forming: Rapidly Generating 3D Forms and Structures through Incremental Forming
source	Living Systems and Micro-Utopias: Towards Continuous Designing, Proceedings of the 21st International Conference on Computer-Aided Architectural Design Research in Asia (CAADRIA 2016) / Melbourne 30 March–2 April 2016, pp. 539-548
doi	https://doi.org/10.52842/conf.caadria.2016.539
summary	The past years have seen significant developments in the area of robotic design interfaces. Building upon visual programming environments, these interfaces now allow the creative industry to de- fine even complex fabrication processes in an easy, accessible way, while providing instant, production-immanent feedback. However, while these software tools greatly speed up the programming of robot- ic arms, many processes are still inherently slow: Subtractive process- es need to remove a large amount of material with comparably small tools, while additive processes are limited by the speed of the extruder and the properties of the extruded material. In this research we present a new method for incrementally shaping transparent polymer materi- als with a robotic arm, without requiring heat or dies for deep- drawing, thus allowing us to rapidly fabricate individual panels within a minimum of time.
keywords	Incremental forming; robotic fabrication; visual programming
series	CAADRIA
email
last changed	2022/06/07 07:59

_id	ecaade2016_043
id	ecaade2016_043
authors	Wit, Andrew and Kim, Simon
year	2016
title	rolyPOLY - A Hybrid Prototype for Digital Techniques and Analog Craft in Architecture
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 631-638
doi	https://doi.org/10.52842/conf.ecaade.2016.1.631
wos	WOS:000402063700068
summary	The rapid emergence of computational design tools, advanced material systems and robotic fabrication within the disciplines of architecture and construction has granted designers immense freedom in form and assembly, while retaining pronounced control over output quality throughout the entirety of the design and fabrication process. Simultaneously, the complexity inherent within these tools and processes can lead to a loss of craft though the production of methodologies, forms and artifacts left with extremely recognizable residues from tooling processes utilized during their production. This paper investigates the fecund intersection of digital technologies and handcraft through core-less carbon fiber reinforced polymer (CFRP) winding as a means of creating a new typology of digital craft blurring the line between human and machine. Through the lens of an innovative wound CFRP shelter rolyPOLY completed during the winter of 2015, this paper will show the exigencies and affordances between the realms of digital and analog methodologies of CFRP winding on large-scale structures.
keywords	additive manufacturing; composites; form finding; craft; analog / digital
series	eCAADe
email
last changed	2022/06/07 07:57

_id	ecaade2016_094
id	ecaade2016_094
authors	Kontovourkis, Odysseas and Konatzii, Panagiota
year	2016
title	Optimization Process Towards Robotic Manufacturing in Actual Scale - The Implementation of Genetic Algorithms in the Robotic Construction of Modular Formwork Systems
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 169-178
doi	https://doi.org/10.52842/conf.ecaade.2016.1.169
wos	WOS:000402063700019
summary	The application of optimization processes in architectural design has gained significant attention among architects and recently has become a driving force towards more robust, reliable as well as flexible design investigations. Such application, require handling of multiple parameters, aiming at finding the range of possible solutions in morphological or topological problems of optimization, mostly during the design decision-making process and under the influence of functional, environmental, structural, or other design criteria. This ongoing research investigation puts forward the hypothesis that optimization processes might be equally applied during the construction decision-making process where architectural systems are examined in terms of their ability to be statically efficient and easily manufactured through the use of robotic machines. This is important to exist within a bidirectional platform of communication where the design decision-making will inform decision taken during pre-construction stage and vise versa. In order to test our hypothesis, two case studies are developed that implements genetic algorithms to examine the geometric and static behavior as well as the construction ability of proposed flexible three-dimensional modular formworks and overall systems for concrete casting, aiming to be robotically manufactured in actual scale.
keywords	Optimization process; genetic algorithms; robotic manufacturing; modular formwork system.
series	eCAADe
email
last changed	2022/06/07 07:51

_id	acadia16_326
id	acadia16_326
authors	Wit, Andrew; Ng, Rashida; Zhang, Cheng; Kim Simon
year	2016
title	Composite Systems for Lightweight Architectures: Case studies in large-scale CFRP winding
source	ACADIA // 2016: POSTHUMAN FRONTIERS: Data, Designers, and Cognitive Machines [Proceedings of the 36th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA) ISBN 978-0-692-77095-5] Ann Arbor 27-29 October, 2016, pp. 326-331
doi	https://doi.org/10.52842/conf.acadia.2016.326
summary	The introduction of lightweight Carbon Fiber Reinforced Polymer (CFRP) based systems into the discipline of architecture and design has created new opportunities for form, fabrication methodologies and material efficiencies that were previously difficult if not impossible to achieve through the utilization of traditional standardized building materials. No longer constrained by predefined material shapes, nominal dimensions, and conventional construction techniques, individual building components or entire structures can now be fabricated from a single continuous material through a means that best accomplishes the desired formal and structural objectives while creating minimal amounts of construction waste and disposable formwork. This paper investigates the design, fabrication and structural potentials of wound, pre-impregnated CFRP composites in architectural-scale applications through the lens of numeric and craft based composite winding implemented in two unique research projects (rolyPOLY + Cloud Magnet). Fitting into the larger research agenda for the CFRP-based robotic housing prototype currently underway in the “One Day House” initiative, these two projects also function as a proof of concept for CFRP monocoque and gridshell based structural systems. Through a rigorous investigation of these case studies, this paper strives to answer several questions about the integration of pre-impregnated CFRP in future full-scale interventions: What form-finding methodologies lend themselves to working with CFRP? What are the advantages and disadvantages of working with pre-impregnated CFRP tow in large-scale applications? What are efficient methods for the placement of CFRP fiber on-site? As well as how scalable is CFRP?
keywords	form finding, winding, cfrp, embedded responsiveness
series	ACADIA
type	paper
email
last changed	2022/06/07 07:57

_id	ascaad2016_048
id	ascaad2016_048
authors	Al Shiekh, Bassam
year	2016
title	Arabic Calligraphy and Parametric Architecture - Translation from a calligraphic force to an architectural form
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 469-482
summary	This paper describes an on-going research that unites two distinct and seemingly unrelated interests. One is Arabic calligraphy and the other is parametric architecture. The effort is to integrate these interests and, in doing so, balance cultural issues with technological ones, traditional with contemporary and spiritual with material. Moreover, this paper is inspired by Arabic calligraphy and its influence on Zaha Hadid’s designs; it is invigorated by parametric systems and their capacity as a source of architectural forms. This paper will observe the rising importance of computation technologies to architecture, which has always been a form of negotiation between ‘function and fiction’ and ‘force and form’. The paper proposes a Parametric Calligraphic Machine that simultaneously produces, connects and separates calligraphic surfaces, calligraphic images and calligraphic reality. Therefore, the goal is to examine this hypothesis in order to produce a set of techniques, tools and methods that inform the three-dimensional design process of Arabic calligraphy’s contemporary possibilities by addressing a process description rather than a state description of creating calligraphic images and calligraphic surfaces. The theoretical approach highlights issues pertaining to calligraphy, spatiality, translation, generative systems, parametric design, visual structure, force and form.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	ascaad2016_031
id	ascaad2016_031
authors	Amireh, Omar; Manal Ryalat and Tasbeeh Alaqtum
year	2016
title	Narrative Architectural Fiction in Mentally Built Environments
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 283-294
summary	A thin line lies between reality and fiction; what is mentally imagined and what is visualized. It all depends on how ideas and images are perceived or what neurological activity is triggered in the user’s brain. Architects and designers spare no effort or tools in presenting buildings, architecture or designs in all forms or ways that would augment users’ experience whether on the perceptual or the cognitive level and in both the digital or the physical environments. In a progressive tendency they, the designers, tend to rely more and more on digitizing their vision and mission, which subsequently give them, impressive and expressive superiority, that would influence the users conscious on the one hand and manipulate their subconscious on the other. Within that process designers work hard to break any mental firewall that would prevent their ideas from pervading the space of any mental environment the user, build or visualize. In that context, to what extent such ways of mental entertainments used by architects, legitimize deception in design? What distinguishes employing the rhythmic simulation of the narrative fictional inceptions (virtual reality) from deploying the adaptive stimulation of the experience modeling conceptions. The difference between planting an idea and constructing an idea. It is not the intention of the paper to prove the failure of the computer aided design neither to stand against the digital architectural design media and applications development. It is rather to present a different way of understanding of how architectural design whether virtual, digital, or real can stimulates and induces codes and messages that is correlated to the brainwave cognitive attributes and can generate a narrative brain environment where the brain can construct and simulate its own fictional design. Doing so, the paper will review certain experimental architectural events and activities which integrate sound and sight elements and effects within some electronic, technical and digital environments.
series	ASCAAD
email
last changed	2017/05/25 13:33

_id	sigradi2016_450
id	sigradi2016_450
authors	Araujo, André L.; Celani, Gabriela
year	2016
title	Exploring Weaire-Phelan through Cellular Automata: A proposal for a structural variance-producing engine
source	SIGraDi 2016 [Proceedings of the 20th Conference of the Iberoamerican Society of Digital Graphics - ISBN: 978-956-7051-86-1] Argentina, Buenos Aires 9 - 11 November 2016, pp.710-714
summary	Complex forms and structures have always been highly valued in architecture, even much before the development of computers. Many architects and engineers have strived to develop structures that look very complex but at the same time are relatively simple to understand, calculate and build. A good example of this approach is the Beijing National Aquatics Centre design for the 2008 Olympic Games, also known as the Water Cube. This paper presents a proposal for a structural variance-producing engine using cellular automata (CA) techniques to produce complex structures based on Weaire-Phelan geometry. In other words, this research evaluates how generative and parametric design can be integrated with structural performance in order to enhance design flexibility and control in different stages of the design process. The method we propose was built in three groups of procedures: 1) we developed a method to generate several fits for the two Weaire-Phelan polyhedrons using CA computation techniques; 2) through the finite elements method, we codify the structural analysis outcomes to use them as inputs for the CA algorithm; 3) evaluation: we propose a framework to compare how the final outcomes deviate for the good solutions in terms of structural performance and rationalization of components. We are interested in knowing how the combination of the procedures could contribute to produce complex structures that are at the same time certain rational. The system developed allows the structural analysis of structured automatically generated by a generative system. However, some efficient solutions from the structural performance point of view do not necessarily represent a rational solution from the feasibility aspects.
keywords	Structural design; Complex structures; Bottom-up design approach
series	SIGRADI
email
last changed	2021/03/28 19:58

_id	ascaad2016_008
id	ascaad2016_008
authors	Armstrong, Logan; Guy Gardner and Christina James
year	2016
title	Evolutionary Solar Architecture - Generative Solar Design Through Soft Forms and Rigid Logics
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 55-64
summary	This paper describes the development of a workflow for the production of a net zero off-grid research cabin. The workflow deploys a number of affiliated parametric software packages as a form finding tool for the exterior envelope of this structure, with a focus on passive solar design as a generative formal driver. The design was required to incorporate the spatial and programmatic needs of the users in a compact, barrier free, net zero building. Simultaneously, the research question asked the designers to harness the potential of digital design in the consideration of future fabrication techniques, in order to optimize the building’s performance and the speed and quality of assembly once the project moves into construction. Parameters considered include solar exposure, external surface area, cost, fabrication, functionality, and aesthetic criteria. This project was developed by a multidisciplinary team of graduate students at the University of Calgary.
series	ASCAAD
email
last changed	2017/05/25 13:13

_id	ecaade2016_055
id	ecaade2016_055
authors	Baranovskaya, Yuliya, Prado, Marshall, Dörstelmann, Moritz and Menges, Achim
year	2016
title	Knitflatable Architecture - Pneumatically Activated Preprogrammed Knitted Textiles
source	Herneoja, Aulikki; Toni Österlund and Piia Markkanen (eds.), Complexity & Simplicity - Proceedings of the 34th eCAADe Conference - Volume 1, University of Oulu, Oulu, Finland, 22-26 August 2016, pp. 571-580
doi	https://doi.org/10.52842/conf.ecaade.2016.1.571
wos	WOS:000402063700062
summary	Textiles are widely used in architecture for tensile structures, as they are lightweight and can easily span large distances. These structures typically require an external framework for a support. Inflatable structures are self-supporting but are limited to relatively simple forms or require complex and predetermined cut patterns. The development of an adaptive and programmable textile system with an integrative method for pneumatic activation would create a novel self-supporting structure with high degree of design and architectural potential. This creates a highly integrative hybrid system where the generic pneumatic membranes are constrained by the differentiated knitted textile skin that is stretched in several directions under air pressure. This allows for an innovative, lightweight, easily transportable design, where the preprogrammed knitting pattern defines the structure, geometry and formation, activated under pneumatic pressure.
keywords	programming textiles; binary textiles; analogue computing; air inflation; grading textile properties
series	eCAADe
email
last changed	2022/06/07 07:54

_id	ascaad2016_055
id	ascaad2016_055
authors	Barbouche, Rached
year	2016
title	Modeling Decorative Forms and Design Knowledge
source	Parametricism Vs. Materialism: Evolution of Digital Technologies for Development [8th ASCAAD Conference Proceedings ISBN 978-0-9955691-0-2] London (United Kingdom) 7-8 November 2016, pp. 547-556
summary	Form analysis in architecture is a method to increase knowledge of human made objects, by observation and description. Modeling attempts to identify characteristics carried by these objects and the rules of their production. Two approaches are relevant here. The first concerns the analysis and modeling of an object corpus (decors worn by windows), belonging to colonial architecture of Tunis from the late 19th to early 20th century and the second deals from a GIS, storing and mapping the forms variation, taken on the analyzed objects. The set allows developing tools for decision support, used not only in the description of a corpus, but also ultimately to lead to the architectural and stylistic classification of the city buildings.
series	ASCAAD
email
last changed	2017/05/25 13:34

_id	acadia23_v1_122
id	acadia23_v1_122
authors	Crawford, Assia
year	2023
title	Mycelium Making: An exploration in Growing Modular Interiors
source	ACADIA 2023: Habits of the Anthropocene: Scarcity and Abundance in a Post-Material Economy [Volume 1: Projects Catalog of the 43rd Annual Conference of the Association of Computer Aided Design in Architecture (ACADIA) ISBN 979-8-9860805-8-1]. Denver. 26-28 October 2023. edited by A. Crawford, N. Diniz, R. Beckett, J. Vanucchi, M. Swackhamer 122-127.
summary	The project was developed as part of an MArch Architecture design studio that looked at emerging bio-degradable living materials in the form of mycelium bio-composites as a way of manufacturing temporary structures. The project introduced students to laboratory methods for material development and bio-material cultivation. Students were asked to consider the implications of designing with a material that has agency and needs. The studio explored what it means to “make kin” (Haraway 2016) on a planet that has reached a tipping point. It approached the topic from the assumption that the breakdown of existing economic models and resource scarcity offers potent ground for new forms of space making to emerge. The studio looked to nature’s ability to respond to environmental stimuli and design constraints. Students harnessed advances in our scientific understanding to cultivate an architectural language that captures the transient and unstable nature of this new family of biomaterials
series	ACADIA
type	project
email
last changed	2024/04/17 13:58

For more results click below: